david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-POWER-ETHERNET-EXT-MIB

1736 lines
59 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-POWER-ETHERNET-EXT-MIB
--
-- Ported from flo_dsbu7
--
-- Nov 2011, ovld-sw-platform-dev
-- March 2004, Seth Wang
--
-- Copyright (c) 2004-2007, 2010-2013, 2017-2018 by Cisco Systems, Inc.
--
-- All rights reserved.
-- ****************************************************************
CISCO-POWER-ETHERNET-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
pethPsePortEntry,
pethMainPseGroupIndex,
pethPsePortGroupIndex,
pethPsePortIndex
FROM POWER-ETHERNET-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
EntPhysicalIndexOrZero
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoPowerEthernetExtMIB MODULE-IDENTITY
LAST-UPDATED "201801190000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"A MIB module for extending the POWER-ETHERNET-MIB
(RFC3621) to add objects which provide additional
management information about Power Sourcing Equipment
(PSE) not available in POWER-ETHERNET-MIB.
Glossary
Power Sourcing Equipment (PSE)
These are devices supplying electrical power to
other equipment. They are, for example, inline power
switches, inline power daughterboards and power patch
panels.
Powered Device (PD)
These are devices receiving their electrical power
supply from Power Sourcing Equipment. They are, for
example, IP telephones and wireless access points
or bridges."
REVISION "201801190000Z"
DESCRIPTION
"Added following OBJECT-GROUP
- cpeExtPseInfoPwrGroup
Added new compliance
- cpeExtMIBCompliance6."
REVISION "201307100000Z"
DESCRIPTION
"Added following TEXTUAL-CONVENTION
- CpeExtLldpPwrClassOrZero
Added following OBJECT-GROUP
- cpeExtPsePortLldpPowerGroup
Added new compliance
- cpeExtMIBCompliance5."
REVISION "201107180000Z"
DESCRIPTION
"Added cpeExtPowerPriorityGroup, cpeExtPsePortLldpGroup
and cpeExtPsePortCapabilitiesGroup.
Added a new enumeration 'class4' in cpeExtPdStatsClass.
Added TEXTUAL-CONVENTION CpeExtLldpPwrType,
CpeExtLldpPwrSrc, and CpeExtPwrPriority."
REVISION "200912040000Z"
DESCRIPTION
"Updated the DESCRIPTION of cpeExtPolicingNotif."
REVISION "200704120000Z"
DESCRIPTION
"Added 'overdrawLog' value to cpeExtPsePortAdditionalStatus.
Added cpeExtPortPolicingActionGroup, cpeExtPortPwrManAllocGroup
cpeExtPolicingNotifEnableGroup, and cpeExtPolicingNotifGroup."
REVISION "200702020000Z"
DESCRIPTION
"Added cpeExtPsePortEntPhyIndex,
cpeExtPsePortPolicingCapable and
cpeExtPsePortPolicingEnable to cpeExtPsePortTable.
Added cpeExtPdStatsTotalDevices and cpeExtPdStatsTable.
Added enumerated value disable(5) to cpeExtPsePortEnable."
REVISION "200506100000Z"
DESCRIPTION
"Added 'limit' to cpeExtPsePortEnable, 'overdraw' to
cpeExtPsePortAdditionalStatus and the groups
cpeExtPsePortPwrMonitorGroup and
cpeExtMainPseGroup."
REVISION "200404120000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 402 }
cpeExtMIBNotifs OBJECT IDENTIFIER
::= { ciscoPowerEthernetExtMIB 0 }
cpeExtMIBObjects OBJECT IDENTIFIER
::= { ciscoPowerEthernetExtMIB 1 }
cpeExtMIBConformance OBJECT IDENTIFIER
::= { ciscoPowerEthernetExtMIB 2 }
CpeExtLldpPwrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The requested Data Terminal Equipment (DTE) Power via
Media Dependent Interface (MDI) type based on Data Link Layer
(DLL) power classification.
In Data Link Layer power classification, the PSE and PD perform
power negotiation using the Link Layer Discovery Protocol (LLDP)
as soon as the data link is established. It has finer power
resolution than the Physical Layer power classification and has
the ability for the PSE and PD to participate in dynamic power
allocation wherein allocated power to the PD may change one or
more times during PD operation.
'type1Pd' - A PD that advertises a power draw less than or
equal to 12.95 W (at the PD).
'type1Pse' - A PSE that is designed to support a Type 1 PD.
'type2Pd' - A PD that advertises a power draw greater than
12.95 W (at the PD).
'type2Pse - A PSE that is designed to support either a Type 1
or a Type 2 PD."
SYNTAX INTEGER {
type1Pd(1),
type1Pse(2),
type2Pd(3),
type2Pse(4)
}
CpeExtLldpPwrSrc ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The power source of the PD or PSE port which implements the
LLDP based Data Link Layer power classification.
'pseAndLocal' - A PD powered both locally and by a PSE.
'local' - A PD powered locally only.
'pse' - A PD powered by a PSE only.
'backupSrc' - A PSE powered by a backup power source.
'primarySrc' - A PSE powered by its primary power source.
'unknown' - A PD or PSE where the power source is
unknown."
SYNTAX INTEGER {
pseAndLocal(1),
local(2),
pse(3),
backupSrc(4),
primarySrc(5),
unknown(6)
}
CpeExtPwrPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The power priority for the PD on the PSE port which implements
the LLDP based Data Link Layer power classification.
'critical' - power priority is at critical level.
'high' - power priority is at high level.
'low' - power priority is at low level.
'unknown' - power priority level is unknown."
SYNTAX INTEGER {
critical(1),
high(2),
low(3),
unknown(4)
}
CpeExtLldpPwrClassOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The power class of the PD or PSE port that implements
the LLDP based Data Link Layer power classification
'unknown' - power classification of the powered devices is
unknown.
'class0' - power classification of the powered devices is
class 0 in IEEE specifications.
'class1' - power classification of the powered devices is
class 1 in IEEE specifications.
'class2' - power classification of the powered devices is
class 2 in IEEE specifications.
'class3' - power classification of the powered devices is
class 3 in IEEE specifications.
'class4' - power classification of the powered devices is
class 4 in IEEE specifications."
SYNTAX INTEGER {
unknown(0),
class0(1),
class1(2),
class2(3),
class3(4),
class4(5)
}
cpeExtDefaultAllocation OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the default inline power allocation per
port. This is a global configuration parameter that applies
to all inline power capable ports in the system.
The system must consider this object as well as the per port
configuration object, cpeExtPsePortPwrMax, when determining
how much power to allocate to a port. The system will use the
lower of the two numbers."
::= { cpeExtMIBObjects 1 }
cpeExtPsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpeExtPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table extends the POWER-ETHERNET-MIB pethPsePortTable
for power Ethernet ports on a Powered Sourcing Equipment
(PSE) device."
REFERENCE "RFC3621"
::= { cpeExtMIBObjects 2 }
cpeExtPsePortEntry OBJECT-TYPE
SYNTAX CpeExtPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpeExtPsePortEntry extends a corresponding
pethPsePortTable entry. This entry displays and
controls more characteristics of a power Ethernet
port on a PSE device."
AUGMENTS { pethPsePortEntry }
::= { cpeExtPsePortTable 1 }
CpeExtPsePortEntry ::= SEQUENCE {
cpeExtPsePortEnable INTEGER,
cpeExtPsePortDiscoverMode INTEGER,
cpeExtPsePortDeviceDetected TruthValue,
cpeExtPsePortIeeePd TruthValue,
cpeExtPsePortAdditionalStatus BITS,
cpeExtPsePortPwrMax Unsigned32,
cpeExtPsePortPwrAllocated Unsigned32,
cpeExtPsePortPwrAvailable Unsigned32,
cpeExtPsePortPwrConsumption Unsigned32,
cpeExtPsePortMaxPwrDrawn Unsigned32,
cpeExtPsePortEntPhyIndex EntPhysicalIndexOrZero,
cpeExtPsePortPolicingCapable TruthValue,
cpeExtPsePortPolicingEnable INTEGER,
cpeExtPsePortPolicingAction INTEGER,
cpeExtPsePortPwrManAlloc Unsigned32,
cpeExtPsePortCapabilities BITS
}
cpeExtPsePortEnable OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
static(2),
limit(3),
disable(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is an extension of the pethPsePortAdminEnable
object from RFC3621. It allows the user to be more specific
when enabling the PSE functions. The states, 'auto', 'static'
and 'limit' correspond to a value of 'true' for the
pethPsePortAdminEnable object. The state 'disable' corresponds
to a value of 'false' for the pethPsePortAdminEnable object.
Setting this value to 'auto' enables Powered Device discovery
on the interface and the amount of power allocated depends on
the Powered Device discovered. If pethPsePortAdminEnable was
'false' prior to this set operation, then it will become
'true'.
Setting this value to 'static' will also enable Powered
Device discovery. However, this is different from 'auto'
in that the amount of power is pre-allocated based on the
configuration on the Power Sourcing Equipment. If
pethPsePortAdminEnable was 'false' prior to this set
operation, then it will become 'true'.
Setting this value to 'limit' enables Powered Device
discovery on the interface. The amount of power allocated
depends on the Powered Device discovered and the value
of cpeExtPsePortPwrMax. The lower value will be used.
If pethPsePortAdminEnable was 'false' prior to this set
operation, then it will become 'true'.
Setting this value to 'disable' disables the PSE functions.
The pethPsePortAdminEnable object will adopt the value of
'false' if it was 'true' prior to this set operation. When
setting the pethPsePortAdminEnable object to 'false' this
object cpeExtPsePortEnable will adopt the value of 'disable'.
If cpeExtPsePortPolicingCapable of the PSE port, or
cpeExtMainPsePwrMonitorCapable of the PSE port's
main group, has the value of 'false', this object
can only be set to 'auto', 'static' or 'disable'.
Otherwise, this object can be set to 'auto', 'static',
'limit' or 'disable'."
::= { cpeExtPsePortEntry 1 }
cpeExtPsePortDiscoverMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
off(2),
ieee(3),
cisco(4),
ieeeAndCisco(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the discover mode used by the system to
discover the PD.
A value of 'unknown' indicates that the discover mode on the
interface is unknown.
A value of 'off' indicates that discovery is disabled on the
interface.
A value of 'ieee' indicates that the discover mode on the
interface is IEEE based.
A value of 'cisco' indicates that the discover mode on the
interface is Cisco based.
A value of 'ieeeAndCisco' indicates that the discover mode on
the interface is both IEEE and Cisco based."
::= { cpeExtPsePortEntry 2 }
cpeExtPsePortDeviceDetected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if a Powered Device (PD) has been
detected on the interface.
A value of 'true' indicates that a PD has been detected on
the interface.
A value of 'false' indicates that no PD has been detected on
the interface."
::= { cpeExtPsePortEntry 3 }
cpeExtPsePortIeeePd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the Powered Device attached
to the interface is an IEEE compliant Powered Device or not.
A value of 'true' indicates the attached Powered Device is
an IEEE compliant Powered Device.
A value of 'false' indicates the attached Powered Device
is not an IEEE compliant Powered Device. This also means
that the value of the corresponding object from the
pethPsePortTable, pethPsePortPowerClassifications is
irrelevant."
::= { cpeExtPsePortEntry 4 }
cpeExtPsePortAdditionalStatus OBJECT-TYPE
SYNTAX BITS {
deny(0),
overdraw(1),
overdrawLog(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is an extension of the pethPsePortDetectionStatus
object from RFC3621 and provides additional status
information.
deny: When set, the PD attached to the interface is being
denied power due to insufficient power resources on
the Power Sourcing Equipment.
overdraw: When set, the PD attached to the interface is
being denied power because the PD is trying
to consume more power than it has been
configured to consume.
overdrawLog: When set, the PD attached to the interface
is trying to consume more power than it has
been configured to consume, but is not being
denied power."
::= { cpeExtPsePortEntry 5 }
cpeExtPsePortPwrMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the maximum amount of power that the PSE will
make available to the PD connected to this interface."
::= { cpeExtPsePortEntry 6 }
cpeExtPsePortPwrAllocated OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the amount of power allocated from the
PSE for the PD."
::= { cpeExtPsePortEntry 7 }
cpeExtPsePortPwrAvailable OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the amount of power available for
the PD to use. This value may differ from the value
cpeExtPsePortPwrAllocated due to the efficiency issues
of delivering the power from the PSE to the PD.
When sufficient power is available to power a PD, this
value should be equal to the lower of the two objects,
cpeExtDefaultAllocation and cpeExtPsePortPwrMax."
::= { cpeExtPsePortEntry 8 }
cpeExtPsePortPwrConsumption OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the actual power consumption of the PD
connected to this interface. It may not necessarily
be equal to the value of cpeExtPsePortPwrAvailable."
::= { cpeExtPsePortEntry 9 }
cpeExtPsePortMaxPwrDrawn OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the maximum amount of power drawn by the PD
connected to this interface, since it was powered on."
::= { cpeExtPsePortEntry 10 }
cpeExtPsePortEntPhyIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entPhysicalIndex value that uniquely identifies the
PSE port. If the PSE port does not have a corresponding
physical entry in entPhysicalTable or if the
entPhysicalTable is not supported by the management
system, this object has the value of zero."
REFERENCE "RFC 2737, entPhysicalIndex."
::= { cpeExtPsePortEntry 11 }
cpeExtPsePortPolicingCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the PSE port hardware is
capable of policing the port for proper power consumption
based on the allocated value."
::= { cpeExtPsePortEntry 12 }
cpeExtPsePortPolicingEnable OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to turn on or turn off the
power policing of the PSE port. If the instance value of
cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed
to set this object to 'on' or 'off'. Otherwise, this
object is read-only and always has the value of 'off'."
::= { cpeExtPsePortEntry 13 }
cpeExtPsePortPolicingAction OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
logOnly(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the power policing action that
the device will take on this PSE port when the real-time
power consumption exceeds its max power allocation if
the value of cpeExtPsePortPolicingEnable is 'on'.
'deny' - the device will deny the power to
the PSE port
'logOnly' - the device will not deny the power
to the PSE port"
::= { cpeExtPsePortEntry 14 }
cpeExtPsePortPwrManAlloc OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the manual power allocation that
the PSE will allocate to the PD connected to this
interface regardless of the amount requested via CDP
or IEEE.
Setting this object value to zero disables the manual
power allocation.
Warning: Misconfiguring this manual power allocation may
cause damage to the system and void the warranty. Take
precautions not to oversubscribe the power supply."
::= { cpeExtPsePortEntry 15 }
cpeExtPsePortCapabilities OBJECT-TYPE
SYNTAX BITS {
policing(0),
poePlus(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the PSE functionality that
this port supports.
If the 'policing' BIT is set, then this PSE port is
capable of policing the port for proper power consumption
based on the allocated value.
If the 'poePlus' BIT is set, then this PSE port supports
PoE Plus functions."
::= { cpeExtPsePortEntry 16 }
cpeExtMainPseTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpeExtMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the additional information for the
main PSE group in pethMainPseTable."
REFERENCE "RFC3621, pethMainPseTable"
::= { cpeExtMIBObjects 3 }
cpeExtMainPseEntry OBJECT-TYPE
SYNTAX CpeExtMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpeExtMainPseEntry contains information about
a particular pethMainPseGroupIndex. An entry is
created by the agent when a main PSE group is added
to the pethMainPseTable. An entry is deleted by the
agent when a main PSE group is removed from the
pethMainPseTable."
REFERENCE "RFC3621, pethMainPseTable"
INDEX { pethMainPseGroupIndex }
::= { cpeExtMainPseTable 1 }
CpeExtMainPseEntry ::= SEQUENCE {
cpeExtMainPseEntPhyIndex EntPhysicalIndexOrZero,
cpeExtMainPseDescr SnmpAdminString,
cpeExtMainPsePwrMonitorCapable TruthValue,
cpeExtMainPseUsedPower Unsigned32,
cpeExtMainPseRemainingPower Unsigned32
}
cpeExtMainPseEntPhyIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entPhysicalIndex value that uniquely identifies the
main PSE group. If the main PSE group does not have a
corresponding physical entry in entPhysicalTable or if
the entPhysicalTable is not supported by the management
system, then this object has the value of zero."
REFERENCE "RFC 2737, entPhysicalIndex."
::= { cpeExtMainPseEntry 1 }
cpeExtMainPseDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the Power
Source Equipment (PSE) group."
::= { cpeExtMainPseEntry 2 }
cpeExtMainPsePwrMonitorCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the given group is capable of
monitoring the power consumption of the interfaces that
belong to the group. The value 'true' means that the
group is capable. The value 'false' means that the group
in not capable."
::= { cpeExtMainPseEntry 3 }
cpeExtMainPseUsedPower OBJECT-TYPE
SYNTAX Unsigned32
UNITS "miliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates used power expressed in miliwatts."
::= { cpeExtMainPseEntry 4 }
cpeExtMainPseRemainingPower OBJECT-TYPE
SYNTAX Unsigned32
UNITS "miliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates remaining power expressed in
miliwatts, this parameter is calculated as pethMainPsePower
minus cpeExtMainPseUsedPower."
::= { cpeExtMainPseEntry 5 }
cpeExtPdStatistics OBJECT IDENTIFIER
::= { cpeExtMIBObjects 4 }
cpeExtPdStatsTotalDevices OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of the
powered devices with any power classifications
in the system.
Classification is a way to tag different terminals
on the Power over LAN network according to their
power consumption. Devices such as IP telephones,
WLAN access points and others, will be classified
according to their power requirements."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.6
aPSEPowerClassification"
::= { cpeExtPdStatistics 1 }
cpeExtPdStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpeExtPdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the statistics information
of the powered devices fallen into different power
classifications in the system."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.6
aPSEPowerClassification"
::= { cpeExtPdStatistics 2 }
cpeExtPdStatsEntry OBJECT-TYPE
SYNTAX CpeExtPdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpeExtPdStatsEntry contains the statistics
information about a particular power classification
defined in cpeExtPdStatsIndex."
INDEX { cpeExtPdStatsClass }
::= { cpeExtPdStatsTable 1 }
CpeExtPdStatsEntry ::= SEQUENCE {
cpeExtPdStatsClass INTEGER,
cpeExtPdStatsDeviceCount Unsigned32
}
cpeExtPdStatsClass OBJECT-TYPE
SYNTAX INTEGER {
cisco(1),
class0(2),
class1(3),
class2(4),
class3(5),
class4(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The power classification as the index for the
statistics information for powered devices.
A value of 'cisco' indicates that the powered
devices are CISCO proprietary and their power
classification does not fall into any class
in IEEE specifications.
A value of 'class0' indicates that the power
classification of the powered devices falls into
class 0 in IEEE specifications.
A value of 'class1' indicates that the power
classification of the powered devices falls into
class 1 in IEEE specifications.
A value of 'class2' indicates that the power
classification of the powered devices falls into
class 2 in IEEE specifications.
A value of 'class3' indicates that the power
classification of the powered devices falls into
class 3 in IEEE specifications.
A value of 'class4' indicates that the power
classification of the powered devices falls into
class 4 in IEEE specifications."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.6
aPSEPowerClassification"
::= { cpeExtPdStatsEntry 1 }
cpeExtPdStatsDeviceCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the powered
devices whose power classification falls into
a specific value of cpeExtPdStatsIndex."
::= { cpeExtPdStatsEntry 2 }
cpeExtPolicingNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the
the cpeExtPolicingNotif notification."
::= { cpeExtMIBObjects 5 }
cpeExtPowerPriorityEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the global control of the power priority
feature on the device. 'true' indicates that the power priority
feature is globally enabled. 'false' indicates that the power
priority feature is globally disabled."
::= { cpeExtMIBObjects 6 }
cpeExtPsePortLldpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpeExtPsePortLldpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table provides the Link Layer Discovery Protocol (LLDP)
based Data Link Layer (DLL) power classification
characteristics of PSE ports and PDs attached to them."
::= { cpeExtMIBObjects 7 }
cpeExtPsePortLldpEntry OBJECT-TYPE
SYNTAX CpeExtPsePortLldpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A cpeExtPsePortLldpEntry entry contains the LLDP
based 802.3at DLL power classification characteristics for
a particular PSE and the PD attached to it.
A PSE has its entry here when all of the following conditions
are satisfied:
- The LLDP power classification is globally enabled.
- It has a PD attached.
- LLDP is the operational power negotiation protocol between
the PSE and the PD attached."
INDEX {
pethPsePortGroupIndex,
pethPsePortIndex
}
::= { cpeExtPsePortLldpTable 1 }
CpeExtPsePortLldpEntry ::= SEQUENCE {
cpeExtPsePortLldpPwrType CpeExtLldpPwrType,
cpeExtPsePortLldpPdPwrType CpeExtLldpPwrType,
cpeExtPsePortLldpPwrSrc CpeExtLldpPwrSrc,
cpeExtPsePortLldpPdPwrSrc CpeExtLldpPwrSrc,
cpeExtPsePortLldpPwrPriority CpeExtPwrPriority,
cpeExtPsePortLldpPdPwrPriority CpeExtPwrPriority,
cpeExtPsePortLldpPwrReq Unsigned32,
cpeExtPsePortLldpPdPwrReq Unsigned32,
cpeExtPsePortLldpPwrAlloc Unsigned32,
cpeExtPsePortLldpPdPwrAlloc Unsigned32,
cpeExtPsePortLldpPwrClass CpeExtLldpPwrClassOrZero,
cpeExtPsePortLldpPdPwrClass CpeExtLldpPwrClassOrZero,
cpeExtPsePortLldpPdPwrSupport BITS,
cpeExtPsePortLldpPdPwrPairsOrZero INTEGER
}
cpeExtPsePortLldpPwrType OBJECT-TYPE
SYNTAX CpeExtLldpPwrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DTE Power via MDI type of the local system (PSE)."
::= { cpeExtPsePortLldpEntry 1 }
cpeExtPsePortLldpPdPwrType OBJECT-TYPE
SYNTAX CpeExtLldpPwrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DTE Power via MDI type of the remote system (PD)."
::= { cpeExtPsePortLldpEntry 2 }
cpeExtPsePortLldpPwrSrc OBJECT-TYPE
SYNTAX CpeExtLldpPwrSrc
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power source of the local system (PSE)."
::= { cpeExtPsePortLldpEntry 3 }
cpeExtPsePortLldpPdPwrSrc OBJECT-TYPE
SYNTAX CpeExtLldpPwrSrc
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power source of the remote system (PD)."
::= { cpeExtPsePortLldpEntry 4 }
cpeExtPsePortLldpPwrPriority OBJECT-TYPE
SYNTAX CpeExtPwrPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power priority of the local system (PSE)."
::= { cpeExtPsePortLldpEntry 5 }
cpeExtPsePortLldpPdPwrPriority OBJECT-TYPE
SYNTAX CpeExtPwrPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power priority of the remote system (PD)."
::= { cpeExtPsePortLldpEntry 6 }
cpeExtPsePortLldpPwrReq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The requested PD power value that the local
system (PSE) mirrors back to the remote system (PD)."
::= { cpeExtPsePortLldpEntry 7 }
cpeExtPsePortLldpPdPwrReq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PD requested power value received from
the remote system (PD)."
::= { cpeExtPsePortLldpEntry 8 }
cpeExtPsePortLldpPwrAlloc OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSE allocated power value for the remote
system (PD)."
::= { cpeExtPsePortLldpEntry 9 }
cpeExtPsePortLldpPdPwrAlloc OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSE allocated power value received from the
remote system (PD)."
::= { cpeExtPsePortLldpEntry 10 }
cpeExtPsePortLldpPwrClass OBJECT-TYPE
SYNTAX CpeExtLldpPwrClassOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSE power classification sent to the remote PD via MDI TLV
in LLDP Protocol."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.6
aPSEPowerClassification"
::= { cpeExtPsePortLldpEntry 11 }
cpeExtPsePortLldpPdPwrClass OBJECT-TYPE
SYNTAX CpeExtLldpPwrClassOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This power classification received from the remote
system (PD)."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.6
aPSEPowerClassification"
::= { cpeExtPsePortLldpEntry 12 }
cpeExtPsePortLldpPdPwrSupport OBJECT-TYPE
SYNTAX BITS {
portClass(0),
pseMdiPwrSupport(1),
pseMdiPwrState(2),
psePairCtrlAbility(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the power support mode received
from the remote PD via MDI TLV in LLDP protocol.
'portClass' - This bit is set if the port is
operating as PSE. Otherwise, it is
operating as PD.
'pseMdiPwrSupport' - This bit is set if power is supported in
MDI TLV.
'pseMdiPwrState' - This bit is set if power is enabled.
'psePairCtrlAbility' - This bit is set if pair selection can
be controlled."
::= { cpeExtPsePortLldpEntry 13 }
cpeExtPsePortLldpPdPwrPairsOrZero OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
signal(1),
spare(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the pinout pairs in use received
from the remote PD via MDI TLV in LLDP Protocol.
'unknown' - information is not available
'signal' - the signal pairs are in use.
'spare' - the spare pairs are in use."
::= { cpeExtPsePortLldpEntry 14 }
-- Notifications
cpeExtPolicingNotif NOTIFICATION-TYPE
OBJECTS {
cpeExtPsePortPolicingAction,
cpeExtPsePortAdditionalStatus,
cpeExtPsePortPwrAllocated,
cpeExtPsePortMaxPwrDrawn
}
STATUS current
DESCRIPTION
"This notification is generated when the 'overdraw' or
'overdrawLog' bit in value of cpeExtPsePortAdditionalStatus
is set or cleared."
::= { cpeExtMIBNotifs 1 }
-- Conformance
cpeExtMIBCompliances OBJECT IDENTIFIER
::= { cpeExtMIBConformance 1 }
cpeExtMIBGroups OBJECT IDENTIFIER
::= { cpeExtMIBConformance 2 }
cpeExtMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpeExtPsePortGroup }
GROUP cpeExtPsePortGlobalConfigGroup
DESCRIPTION
"The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces."
::= { cpeExtMIBCompliances 1 }
cpeExtMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpeExtPsePortGroup }
GROUP cpeExtPsePortGlobalConfigGroup
DESCRIPTION
"The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces."
GROUP cpeExtPsePortPwrMonitorGroup
DESCRIPTION
"The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces."
GROUP cpeExtMainPseGroup
DESCRIPTION
"The cpeExtMainPseGroup is mandatory for agents
that support the interface power consumption
monitoring, or need additional info to identify
the PSE group."
::= { cpeExtMIBCompliances 2 }
cpeExtMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpeExtPsePortGroup }
GROUP cpeExtPsePortGlobalConfigGroup
DESCRIPTION
"The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces."
GROUP cpeExtPsePortPwrMonitorGroup
DESCRIPTION
"The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces."
GROUP cpeExtMainPseGroup2
DESCRIPTION
"The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group."
GROUP cpeExtPseGrpPwrGroup
DESCRIPTION
"The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups."
GROUP cpeExtPortEntityIndexGroup
DESCRIPTION
"The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port."
GROUP cpeExtPortPolicingGroup
DESCRIPTION
"The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports."
GROUP cpeExtPdStatsGroup
DESCRIPTION
"The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices."
GROUP cpeExtPortPolicingActionGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action."
GROUP cpeExtPortPwrManAllocGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation."
GROUP cpeExtPolicingNotifEnableGroup
DESCRIPTION
"The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
GROUP cpeExtPolicingNotifGroup
DESCRIPTION
"The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
::= { cpeExtMIBCompliances 3 }
cpeExtMIBCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpeExtPsePortGroup }
GROUP cpeExtPsePortGlobalConfigGroup
DESCRIPTION
"The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces."
GROUP cpeExtPsePortPwrMonitorGroup
DESCRIPTION
"The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces."
GROUP cpeExtMainPseGroup2
DESCRIPTION
"The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group."
GROUP cpeExtPseGrpPwrGroup
DESCRIPTION
"The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups."
GROUP cpeExtPortEntityIndexGroup
DESCRIPTION
"The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port."
GROUP cpeExtPortPolicingGroup
DESCRIPTION
"The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports."
GROUP cpeExtPdStatsGroup
DESCRIPTION
"The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices."
GROUP cpeExtPortPolicingActionGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action."
GROUP cpeExtPortPwrManAllocGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation."
GROUP cpeExtPolicingNotifEnableGroup
DESCRIPTION
"The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
GROUP cpeExtPolicingNotifGroup
DESCRIPTION
"The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
GROUP cpeExtPowerPriorityGroup
DESCRIPTION
"The cpeExtPowerPriorityGroup is mandatory for agents
that support global control of the power priority
feature."
GROUP cpeExtPsePortLldpGroup
DESCRIPTION
"The cpeExtPsePortLldpGroup is mandatory for agents
that support the LLDP based Data Link Layer
power classification."
GROUP cpeExtPsePortCapabilitiesGroup
DESCRIPTION
"The cpeExtPsePortCapabilitiesGroup is mandatory for agents
that support PSE port capabilities."
OBJECT cpeExtPsePortEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPwrMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPolicingEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPolicingAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPwrManAlloc
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPolicingNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPowerPriorityEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cpeExtMIBCompliances 4 }
cpeExtMIBCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpeExtPsePortGroup }
GROUP cpeExtPsePortGlobalConfigGroup
DESCRIPTION
"The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces."
GROUP cpeExtPsePortPwrMonitorGroup
DESCRIPTION
"The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces."
GROUP cpeExtMainPseGroup2
DESCRIPTION
"The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group."
GROUP cpeExtPseGrpPwrGroup
DESCRIPTION
"The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups."
GROUP cpeExtPortEntityIndexGroup
DESCRIPTION
"The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port."
GROUP cpeExtPortPolicingGroup
DESCRIPTION
"The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports."
GROUP cpeExtPdStatsGroup
DESCRIPTION
"The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices."
GROUP cpeExtPortPolicingActionGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action."
GROUP cpeExtPortPwrManAllocGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation."
GROUP cpeExtPolicingNotifEnableGroup
DESCRIPTION
"The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
GROUP cpeExtPolicingNotifGroup
DESCRIPTION
"The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
GROUP cpeExtPowerPriorityGroup
DESCRIPTION
"The cpeExtPowerPriorityGroup is mandatory for agents
that support global control of the power priority
feature."
GROUP cpeExtPsePortLldpGroup
DESCRIPTION
"The cpeExtPsePortLldpGroup is mandatory for agents
that support the LLDP based Data Link Layer
power classification."
GROUP cpeExtPsePortCapabilitiesGroup
DESCRIPTION
"The cpeExtPsePortCapabilitiesGroup is mandatory for agents
that support PSE port capabilities."
GROUP cpeExtPsePortLldpPowerGroup
DESCRIPTION
"The cpeExtPsePortLldpPowerGroup is mandatory for agents
that support Power via MDI TLV in LLDP protocol."
OBJECT cpeExtPsePortEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPwrMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPolicingEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPolicingAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPwrManAlloc
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPolicingNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPowerPriorityEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cpeExtMIBCompliances 5 }
cpeExtMIBCompliance6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS { cpeExtPsePortGroup }
GROUP cpeExtPsePortGlobalConfigGroup
DESCRIPTION
"The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces."
GROUP cpeExtPsePortPwrMonitorGroup
DESCRIPTION
"The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces."
GROUP cpeExtMainPseGroup2
DESCRIPTION
"The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group."
GROUP cpeExtPseGrpPwrGroup
DESCRIPTION
"The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups."
GROUP cpeExtPortEntityIndexGroup
DESCRIPTION
"The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port."
GROUP cpeExtPortPolicingGroup
DESCRIPTION
"The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports."
GROUP cpeExtPdStatsGroup
DESCRIPTION
"The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices."
GROUP cpeExtPortPolicingActionGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action."
GROUP cpeExtPortPwrManAllocGroup
DESCRIPTION
"The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation."
GROUP cpeExtPolicingNotifEnableGroup
DESCRIPTION
"The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
GROUP cpeExtPolicingNotifGroup
DESCRIPTION
"The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports."
GROUP cpeExtPowerPriorityGroup
DESCRIPTION
"The cpeExtPowerPriorityGroup is mandatory for agents
that support global control of the power priority
feature."
GROUP cpeExtPsePortLldpGroup
DESCRIPTION
"The cpeExtPsePortLldpGroup is mandatory for agents
that support the LLDP based Data Link Layer
power classification."
GROUP cpeExtPsePortCapabilitiesGroup
DESCRIPTION
"The cpeExtPsePortCapabilitiesGroup is mandatory for agents
that support PSE port capabilities."
GROUP cpeExtPsePortLldpPowerGroup
DESCRIPTION
"The cpeExtPsePortLldpPowerGroup is mandatory for agents
that support Power via MDI TLV in LLDP protocol."
GROUP cpeExtPseInfoPwrGroup
DESCRIPTION
"The cpeExtPseInfoPwrGroup is mandatory for agents
that support used and remaining power info for PSE groups."
OBJECT cpeExtPsePortEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPwrMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPolicingEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPolicingAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPsePortPwrManAlloc
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPolicingNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpeExtPowerPriorityEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cpeExtMIBCompliances 6 }
-- Units of Conformance
cpeExtPsePortGroup OBJECT-GROUP
OBJECTS {
cpeExtPsePortEnable,
cpeExtPsePortDiscoverMode,
cpeExtPsePortDeviceDetected,
cpeExtPsePortIeeePd,
cpeExtPsePortAdditionalStatus,
cpeExtPsePortPwrMax,
cpeExtPsePortPwrAllocated,
cpeExtPsePortPwrAvailable,
cpeExtPsePortPwrConsumption
}
STATUS current
DESCRIPTION
"This group provides information and configuration objects
in addition to those provided in the POWER-ETHERNET-MIB
(RFC3621)."
::= { cpeExtMIBGroups 1 }
cpeExtPsePortGlobalConfigGroup OBJECT-GROUP
OBJECTS { cpeExtDefaultAllocation }
STATUS current
DESCRIPTION
"This is a collection of objects which provide global
configuration of the PSE interfaces."
::= { cpeExtMIBGroups 2 }
cpeExtPsePortPwrMonitorGroup OBJECT-GROUP
OBJECTS { cpeExtPsePortMaxPwrDrawn }
STATUS current
DESCRIPTION
"This is a collection of objects which provide power
monitoring on PD's connected to the PSE interfaces."
::= { cpeExtMIBGroups 3 }
cpeExtMainPseGroup OBJECT-GROUP
OBJECTS {
cpeExtMainPseEntPhyIndex,
cpeExtMainPseDescr,
cpeExtMainPsePwrMonitorCapable
}
STATUS deprecated
DESCRIPTION
"This is a collection of objects which provide
additional information for the PSE group.
cpeExtMainPseGroup object is superseded by cpeExtMainPseGroup2,
and cpeExtPseGrpPwrGroup."
::= { cpeExtMIBGroups 4 }
cpeExtPortEntityIndexGroup OBJECT-GROUP
OBJECTS { cpeExtPsePortEntPhyIndex }
STATUS current
DESCRIPTION
"This is a collection of objects which provide
entity physical index information for PSE port."
::= { cpeExtMIBGroups 5 }
cpeExtPortPolicingGroup OBJECT-GROUP
OBJECTS {
cpeExtPsePortPolicingCapable,
cpeExtPsePortPolicingEnable
}
STATUS current
DESCRIPTION
"This is a collection of objects which provide
the hardware power consumption policing information
for PSE port."
::= { cpeExtMIBGroups 6 }
cpeExtPdStatsGroup OBJECT-GROUP
OBJECTS {
cpeExtPdStatsTotalDevices,
cpeExtPdStatsDeviceCount
}
STATUS current
DESCRIPTION
"This is a collection of objects which provide
the statistics information for powered devices."
::= { cpeExtMIBGroups 7 }
cpeExtMainPseGroup2 OBJECT-GROUP
OBJECTS {
cpeExtMainPseEntPhyIndex,
cpeExtMainPseDescr
}
STATUS current
DESCRIPTION
"This is a collection of objects which provide
additional information to identify the PSE group."
::= { cpeExtMIBGroups 8 }
cpeExtPseGrpPwrGroup OBJECT-GROUP
OBJECTS { cpeExtMainPsePwrMonitorCapable }
STATUS current
DESCRIPTION
"This is a collection of objects which provide
power monitoring information for the PSE group."
::= { cpeExtMIBGroups 9 }
cpeExtPortPolicingActionGroup OBJECT-GROUP
OBJECTS { cpeExtPsePortPolicingAction }
STATUS current
DESCRIPTION
"This is a collection of objects which provide control
of the power policing action of the PSE port."
::= { cpeExtMIBGroups 10 }
cpeExtPortPwrManAllocGroup OBJECT-GROUP
OBJECTS { cpeExtPsePortPwrManAlloc }
STATUS current
DESCRIPTION
"This is a collection of objects which provide manual
power allocation for the PSE port."
::= { cpeExtMIBGroups 11 }
cpeExtPolicingNotifEnableGroup OBJECT-GROUP
OBJECTS { cpeExtPolicingNotifEnable }
STATUS current
DESCRIPTION
"A collection of object that provides control over
power consumption policing status notification."
::= { cpeExtMIBGroups 12 }
cpeExtPolicingNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cpeExtPolicingNotif }
STATUS current
DESCRIPTION
"This is a collection of notifications related to
power consumption policing information for PSE ports."
::= { cpeExtMIBGroups 13 }
cpeExtPowerPriorityGroup OBJECT-GROUP
OBJECTS { cpeExtPowerPriorityEnable }
STATUS current
DESCRIPTION
"A collection of objects which provides global
control of power priority feature."
::= { cpeExtMIBGroups 14 }
cpeExtPsePortLldpGroup OBJECT-GROUP
OBJECTS {
cpeExtPsePortLldpPwrType,
cpeExtPsePortLldpPdPwrType,
cpeExtPsePortLldpPwrSrc,
cpeExtPsePortLldpPdPwrSrc,
cpeExtPsePortLldpPwrPriority,
cpeExtPsePortLldpPdPwrPriority,
cpeExtPsePortLldpPwrReq,
cpeExtPsePortLldpPdPwrReq,
cpeExtPsePortLldpPwrAlloc,
cpeExtPsePortLldpPdPwrAlloc
}
STATUS current
DESCRIPTION
"A collection of objects which provides the
information about the LLDP based Data Link Layer
power classification characteristics of power Ethernet
PSE ports."
::= { cpeExtMIBGroups 15 }
cpeExtPsePortCapabilitiesGroup OBJECT-GROUP
OBJECTS { cpeExtPsePortCapabilities }
STATUS current
DESCRIPTION
"A collection of objects which provides PSE
port capabilities."
::= { cpeExtMIBGroups 16 }
cpeExtPsePortLldpPowerGroup OBJECT-GROUP
OBJECTS {
cpeExtPsePortLldpPwrClass,
cpeExtPsePortLldpPdPwrClass,
cpeExtPsePortLldpPdPwrSupport,
cpeExtPsePortLldpPdPwrPairsOrZero
}
STATUS current
DESCRIPTION
"A collection of objects which provide Power information
via MDI TLV in LLDP Protocol."
::= { cpeExtMIBGroups 17 }
cpeExtPseInfoPwrGroup OBJECT-GROUP
OBJECTS {
cpeExtMainPseUsedPower,
cpeExtMainPseRemainingPower
}
STATUS current
DESCRIPTION
"This is a collection of objects which provide
used and remaining power information for the PSE group."
::= { cpeExtMIBGroups 18 }
END
Reference in New Issue Copy Permalink