david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-SLB-HEALTH-MON-MIB

2764 lines
102 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-SLB-HEALTH-MON-MIB.my: Server Load-Balancing(SLB) Health
-- Monitoring MIB
-- January 2006, Saifullah M.A.
--
-- Copyright (c) 2002, 2005, 2006, 2008 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-SLB-HEALTH-MON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Counter32,
Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType,
InetAddress,
InetPortNumber
FROM INET-ADDRESS-MIB
TimeInterval,
TEXTUAL-CONVENTION,
TruthValue,
DateAndTime,
RowStatus
FROM SNMPv2-TC
CiscoPort
FROM CISCO-TC
slbEntity,
SlbServerString,
slbServerFarmName
FROM CISCO-SLB-MIB
SlbUrlString,
SlbFunctionNameString,
cslbxServerProbes
FROM CISCO-SLB-EXT-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoSlbHealthMonMIB MODULE-IDENTITY
LAST-UPDATED "200806260000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-slb@cisco.com"
DESCRIPTION
"An extension to the CISCO-SLB-EXT-MIB for SLB
health monitoring probes.
SLB: Server Load Balancing. Server load balancing
provides for the balancing of packets and connections
arriving at the SLB device across a number of other
devices, such as real servers, firewalls, or caches.
A system containing an SLB device typically exhibits
higher performance, scalability, and reliability than
any of the devices being load balanced. An SLB device
determines how to handle incoming frames and
connections according to the contents of incoming data
and various configuration options. In determining how
to handle incoming data, an SLB device may examine the
data at any OSI layer, including Layer 7.
This MIB includes information on the health monitoring
probes that can be used for monitoring the health of
real servers. Health checking provides the ability of
the content switch to detect if a server is available
for load balancing. Health probes used for health
checking allow testing various application level
functionality. The active probes are sent at regular
intervals and the lack of a response can lead to a
specific server or and entire group of servers being
declared as not available.
Following probes are based on TCP:
http, https, smtp, telnet, ftp, tcp,
script, ldap, tacacs, sip, echo, finger.
Following probes are based on UDP:
tftp, udp, sip, echo,.
Acronyms and terms:
SLB Server Load Balancing
VIP Virtual Server IP address
NAT Network Address Translation
SF Serverfarm
FT Fault Tolerance
SSL Secure Sockets Layer
TLS Transport Layer Security
Server Farm : Contains cluster of Real Server
Real Server : Real Servers are physical devices
assigned to a server farm.
Real servers provide services that
are load balanced.
Health Probe : The mechanisms to monitor the health
of real servers or rservers.
Virtual IP : The IP through which the real server is
reached during load balancing.
Probe Instance : An instance of the probe identified by
cslbxProbeName. A probe instance is created
for every probe association.
For example: When a probe is associated with
a real server a probe instance is created
for that probe.
Probe Port : This mechanism introduces the capability
Inheritance for the probe instance to inherit the
virtual ip address port or the
the real server port (identified by
cshMonServerfarmRealServerPort) when the
probe port (identified by cslbxProbePort)
is not configured.
The precedence of inheritance is as follows
1. Probe's configured port
2. Real server port
3. Virtual ip address port
4. Probes default port identified by
cslbxProbePort.
Examples:
Scenario 1:
Probe's configured port = 100
Real server port = 200
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 100
Scenario 2:
Probe's configured port = not configured
Real server port = 200
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 200
Scenario 3:
Probe's configured port = not configured
Real server port = not configured
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 300
Scenario 4:
Probe's configured port = not configured
Real server port = not configured
Virtual ip address port = not configured
Probe's default port = 80
Inherited port of the probe instance = 80
Scenario 5:
There can be scenarios wherein there may
be multiple inherited ports for a probe
instance.
There are configurations where multiple virtual
ip addresses with different ports share the
same probe instance and the probe has no
configured port or real server port attached.
In that case the shared probe instance has
multiple inherited ports. A typical scenario
might be
Probe's configured port = not configured
Real server port = not configured
Ports of the virtual ip addresses which
shares the probe instance = 300,400
Probe's default port = 80
Inherited port of the probe instance =
300,400"
REVISION "200806260000Z"
DESCRIPTION
"-Added CiscoProbeInheritedPortType TEXTUAL-CONVENTION.
-Deprecated cshMonSfarmRealProbeStatsTable.
-Added cshMonServerfarmRealProbeStatsTable.
-Added cshMonProbeTypeStatsTable.
-Added the following notifications
ciscoSlbHealthMonSocketOveruse
ciscoSlbHealthMonSocketNormaluse
-Added cshMonSocketOverusageCount notification object.
-Deprecated cshMonSfarmrealserverProbeStatsGroup OBJECT-GROUP.
-Deprecated ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE.
-Added the following OBJECT-GROUP's
cshMonSfarmrealserverProbeStatsGroupRev1
cshMonProbeTypeStatsGroup
cshMonNotifObjectsGroup
-Added cshMonNotifGroup NOTIFICATION-GROUP.
-Added ciscoSlbHealthMonMIBComplianceRev3 MODULE-COMPLIANCE."
REVISION "200803110000Z"
DESCRIPTION
"- Added CiscoProbeHealthMonState TEXTUAL-CONVENTION.
- Added cslbxProbeState to the cslbxProbeCfgTable.
- Added cshMonSfarmRealProbeStatsTable.
- Deprecated cslbHealthMonServerProbesGroup object group.
- Deprecated ciscoSlbHealthMonMIBComplianceRev1 compliance
statement.
- Added cslbHealthMonServerProbesGroupRev1 OBJECT-GROUP.
- Added ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE."
REVISION "200611140000Z"
DESCRIPTION
"- Added following object in cslbxProbeHTTPCfgTable
cslbxProbeHTTPSslTlsVersionSupported.
- Added 'all' enum in cslbxProbeHTTPCfgSslTlsVersion
object.
- Added 'rtspProbe' and 'snmpProbe' in SlbProbeType
TEXTUAL CONVENTION
- Added following group
cslbHealthMonHTTPSProbesGroupRev1.
- Added following in Compliance/Conformance
ciscoSlbHealthMonMIBComplianceRev1."
REVISION "200601180000Z"
DESCRIPTION
"Initial version of this MIB module.
SlbProbeType : New enums(value 10-20) added.
- Following tables were originally defined in CISCO-SLB-EXT-MIB
cslbxProbeCfgTable
cslbxDnsProbeIpTable
cslbxProbeHeaderCfgTable
cslbxProbeExpectStatusCfgTable
- Added following objects in cslbxProbeCfgTable
cslbxProbeDescription
cslbxProbeProtocolType
cslbxProbeRouteMethod
cslbxProbeUserName
cslbxProbePassword
cslbxProbePassCount
cslbxProbePriority
cslbxProbeConnTermination
cslbxProbeSocketReuse
cslbxProbeSendDataType
cslbxProbeSendData
- defined following tables
cslbxProbeHTTPCfgTable
cslbxProbeSIPCfgTable
cslbxProbeFTPCfgTable
cslbxProbeTFTPCfgTable
cslbxProbeIMAPCfgTable
- Added UNITS clause for the following objects
cslbxProbeReceiveTimeout
cslbxProbeTcpOpenTimeout."
::= { ciscoMgmt 508 }
-- *************************************************************
-- * *
-- * SLB-EXT - Probe Configuration Table *
-- * *
-- *************************************************************
cslbxProbeCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The probing function monitors the health of
real servers. The SLB device actively probes
real servers to determine if they are healthy.
This table is for configuring the parameters
of probes."
::= { cslbxServerProbes 1 }
cslbxProbeCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry provides the basic configuration of a
probe of a particular name, served by a particular
SLB entity. This entry may be of any probe type."
INDEX {
slbEntity,
cslbxProbeName
}
::= { cslbxProbeCfgTable 1 }
CslbxProbeCfgEntry ::= SEQUENCE {
cslbxProbeName SlbServerString,
cslbxProbeType SlbProbeType,
cslbxProbeInterval TimeInterval,
cslbxProbeRetries Unsigned32,
cslbxProbeFailedInterval TimeInterval,
cslbxProbeReceiveTimeout TimeInterval,
cslbxProbeTcpOpenTimeout TimeInterval,
cslbxProbeAlternateDestAddrType InetAddressType,
cslbxProbeAlternateDestAddr InetAddress,
cslbxProbeDnsDomainName SnmpAdminString,
cslbxProbeHttpRequestMethod SnmpAdminString,
cslbxProbeHttpRequestUrl SlbUrlString,
cslbxProbeRowStatus RowStatus,
cslbxProbeScriptName SlbFunctionNameString,
cslbxProbeScriptArguments SnmpAdminString,
cslbxProbePort CiscoPort,
cslbxProbeDescription SnmpAdminString,
cslbxProbeRouteMethod INTEGER,
cslbxProbeProtocolType INTEGER,
cslbxProbePassCount Unsigned32,
cslbxProbePriority Unsigned32,
cslbxProbeUserName SnmpAdminString,
cslbxProbePassword SnmpAdminString,
cslbxProbeConnTermination INTEGER,
cslbxProbeSocketReuse TruthValue,
cslbxProbeSendDataType INTEGER,
cslbxProbeSendData SnmpAdminString,
cslbxProbeState TruthValue
}
cslbxProbeName OBJECT-TYPE
SYNTAX SlbServerString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the probe."
::= { cslbxProbeCfgEntry 1 }
cslbxProbeType OBJECT-TYPE
SYNTAX SlbProbeType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of probe."
::= { cslbxProbeCfgEntry 2 }
cslbxProbeInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time between health checks. It is from the end of
previous check to the beginning of the next check."
DEFVAL { 12000 }
::= { cslbxProbeCfgEntry 3 }
cslbxProbeRetries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of consecutive retries without a successful
probe before marking the real server as 'failed'."
DEFVAL { 3 }
::= { cslbxProbeCfgEntry 4 }
cslbxProbeFailedInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time before retrying a 'failed' real
server to see if it has recovered yet."
DEFVAL { 30000 }
::= { cslbxProbeCfgEntry 5 }
cslbxProbeReceiveTimeout OBJECT-TYPE
SYNTAX TimeInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum time to wait for a reply from a real
server before considering this probe attempt
to have failed."
DEFVAL { 1000 }
::= { cslbxProbeCfgEntry 6 }
cslbxProbeTcpOpenTimeout OBJECT-TYPE
SYNTAX TimeInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum time to wait for a TCP SYN/ACK frame
from the real server. This entry is only valid
for probes employing TCP, such as SMTP and HTTP
probes."
DEFVAL { 1000 }
::= { cslbxProbeCfgEntry 7 }
cslbxProbeAlternateDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address stored in
cslbxProbeAlternateDestAddr."
DEFVAL { ipv4 }
::= { cslbxProbeCfgEntry 8 }
cslbxProbeAlternateDestAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The alternative destination IP address to be used with
the probing packet. Probe frames are normally sent to
a real server IP address. If the setting is not
'0.0.0.0', probe frames are sent to the IP address
given by this object. This entry is only valid with
the following probes(cslbxProbeType value):
icmpProbe, tcpProbe, dnsProbe,
httpProbe, ftpProbe, telnetProbe,
smtpProbe udpProbe, httpsProbe,
ldapProbe, popProbe, imapProbe,
radiusProbe, tacacsProbe, sipProbe,
tftpProbe, fingerProbe, echoProbe."
DEFVAL { ''H }
::= { cslbxProbeCfgEntry 9 }
cslbxProbeDnsDomainName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The domain name string use with the DNS probe. (Only
applicable to DNS probes.)"
::= { cslbxProbeCfgEntry 10 }
cslbxProbeHttpRequestMethod OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The request method type string to be used in the
HTTP probe packets. (Only applicable to HTTP
probes.)"
REFERENCE
"RFC 2616 Hypertext Transfer Protocol -- HTTP/1.1
Section 5.1.1."
DEFVAL { "get" }
::= { cslbxProbeCfgEntry 11 }
cslbxProbeHttpRequestUrl OBJECT-TYPE
SYNTAX SlbUrlString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The URI string in the HTTP request of HTTP probe
packets. (Only applicable to HTTP probes.)"
DEFVAL { "" }
::= { cslbxProbeCfgEntry 12 }
cslbxProbeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status is used by a management station to
create or delete the row entry in cslbxProbeCfgTable
following the RowStatus textual convention."
::= { cslbxProbeCfgEntry 13 }
cslbxProbeScriptName OBJECT-TYPE
SYNTAX SlbFunctionNameString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the function to be executed. (Only
applicable to scriptedProbe type.)"
DEFVAL { ''H }
::= { cslbxProbeCfgEntry 14 }
cslbxProbeScriptArguments OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The argument parameters passed into the executable
script. (Only applicable to scriptedProbe type.)"
DEFVAL { ''H }
::= { cslbxProbeCfgEntry 15 }
cslbxProbePort OBJECT-TYPE
SYNTAX CiscoPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number to be used by the probe. The value
of zero indicates the probe will use the default
port number. The default port number can be 0 or
the default port of that particular probe. This
object is not applicable when cslbxProbeType is
'icmpProbe'."
DEFVAL { 0 }
::= { cslbxProbeCfgEntry 16 }
cslbxProbeDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used for configuring the
description of the probe."
DEFVAL { "" }
::= { cslbxProbeCfgEntry 17 }
cslbxProbeRouteMethod OBJECT-TYPE
SYNTAX INTEGER {
other(1),
transparent(2),
routingTable(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the probe destined
to IP address specified in cslbxProbeAlternateDestAddr
be routed using internal routing table or forced to use
the known mac-address of the real-server/gateway that
probe is associated with.
The value 'routingTable' specifies that address be
routed using internal routing table.
The value 'transparent' specifies that the
probe destined to cslbxProbeAlternateDestAddr
is routed using the ip address of the real server
or gateway this probe is associated with.
This object is applicable only if
cslbxProbeAlternateDestAddr is configured."
DEFVAL { transparent }
::= { cslbxProbeCfgEntry 18 }
cslbxProbeProtocolType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
tcp(2),
udp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used for configuring the
transport layer protocol to send
probe messages.
The possible value(s) are :
other: values other than mentioned below.
This value can not be written.
tcp : TCP is used as transport
layer protocol.
udp : UDP is used as transport
layer protocol.
This object can be set for the entries with
following values of cslbxProbeType:
sipProbe,
echoProbe
For other probes, this object can not be written
and the value of this object is based on the
cslbxProbeType."
DEFVAL { tcp }
::= { cslbxProbeCfgEntry 19 }
cslbxProbePassCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the number of successful probe
responses that should be received before declaring
a failed real server as pass. This object is used in
conjunction with 'cslbxProbeFailedInterval'."
::= { cslbxProbeCfgEntry 20 }
cslbxProbePriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the probe priority.
The priority value is in the decreasing order
of the actual priority, i.e., lower the value
higher the priority.
Probes associated with critical services can be
configured with highest priority such that the
results of these probes can be used to trigger
a state change in configuration."
DEFVAL { 2 }
::= { cslbxProbeCfgEntry 21 }
cslbxProbeUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the user name required for
authentication. This object is applicable for
following value of 'cslbxProbeType' :
httpprobe, httpsProbe
telnetProbe, ftpProbe, ldapProbe,
imapProbe, popProbe,
radiusProbe, tacacsProbe."
::= { cslbxProbeCfgEntry 22 }
cslbxProbePassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the password required for
authentication. This object is applicable for following
value of 'cslbxProbeType' :
httpprobe, httpsProbe
telnetProbe, ftpProbe, ldapProbe,
imapProbe, popProbe,
radiusProbe, tacacsProbe.
This object returns zero length octet string when read."
::= { cslbxProbeCfgEntry 23 }
cslbxProbeConnTermination OBJECT-TYPE
SYNTAX INTEGER {
graceful(1),
forced(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the connections need to
be terminated. The possible value(s) are :
graceful : follow graceful handshake for
terminating connections.
forced : send RST to terminate connections.
This object is applicable only for TCP based probes."
DEFVAL { forced }
::= { cslbxProbeCfgEntry 24 }
cslbxProbeSocketReuse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether to reuse the socket or not
for the connection oriented probes. If set to 'true'
same socket is re-used for multiple probes.
If set to 'false' new socket will be created.
This object is applicable only for TCP based probes."
::= { cslbxProbeCfgEntry 25 }
cslbxProbeSendDataType OBJECT-TYPE
SYNTAX INTEGER {
ascii(1),
binary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the data to be sent
for the appropriate probes.
The possible value(s) are:
ascii : ASCII data
binary : binary data.
This object is used in conjunction with object
'cslbxProbeSendData'."
DEFVAL { ascii }
::= { cslbxProbeCfgEntry 26 }
cslbxProbeSendData OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the data to be sent
for the appropriate probes. This object
is applicable for following value(s) of
cslbxProbeType :
echoProbe
fingerProbe
sipProbe
tcpProbe
udpProbe."
::= { cslbxProbeCfgEntry 27 }
cslbxProbeState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the state of the probe.
When the probe is associated with a real server or server
farm it will be active which is represented by
value 'true'. When the probe is active and if the
real server is administratively put into in-service, then
the real server health monitoring will be started.
When the probe is not associated with a real
server or server farm it will be inactive which is represented
by value 'false', so no health monitoring will be
performed."
DEFVAL { false }
::= { cslbxProbeCfgEntry 28 }
-- *************************************************************
-- * *
-- * SLB-EXT - DNS Probe Expected IP Configuration Table *
-- * *
-- *************************************************************
cslbxDnsProbeIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxDnsProbeIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The probing function monitors the health of
real servers. The SLB device actively probes
real servers to determine if they are healthy.
This table is for configuring the parameters
of DNS probes. In a DNS probe, resolution of a
specific domain name is requested, and the
resulting IP address must match one of a list of
'expected IP addresses' configured for that
probe. This table stores the list of expected IP
addresses for each DNS probe."
::= { cslbxServerProbes 2 }
cslbxDnsProbeIpEntry OBJECT-TYPE
SYNTAX CslbxDnsProbeIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address in this entry is a valid response
to a request for resolution of the domain name
associated with the DNS probe in this entry."
INDEX {
slbEntity,
cslbxDnsProbeIpProbeName,
cslbxDnsProbeIpAddressType,
cslbxDnsProbeIpAddress
}
::= { cslbxDnsProbeIpTable 1 }
CslbxDnsProbeIpEntry ::= SEQUENCE {
cslbxDnsProbeIpProbeName SlbServerString,
cslbxDnsProbeIpAddressType InetAddressType,
cslbxDnsProbeIpAddress InetAddress,
cslbxDnsProbeIpRowStatus RowStatus
}
cslbxDnsProbeIpProbeName OBJECT-TYPE
SYNTAX SlbServerString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the DNS probe."
::= { cslbxDnsProbeIpEntry 1 }
cslbxDnsProbeIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of address stored in
cslbxDnsProbeIpAddress."
::= { cslbxDnsProbeIpEntry 2 }
cslbxDnsProbeIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address that may be expected in response
to a DNS probe from a 'healthy' real DNS server."
::= { cslbxDnsProbeIpEntry 3 }
cslbxDnsProbeIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object used by a management station to create
or delete the row entry in cslbxDnsProbeIpTable
following the RowStatus textual convention."
::= { cslbxDnsProbeIpEntry 4 }
-- *************************************************************
-- * *
-- * SLB-EXT - HTTP Probe Header Table *
-- * *
-- *************************************************************
cslbxProbeHeaderCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeHeaderCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The probing function monitors the health of
real servers. The SLB device actively probes
real servers to determine if they are healthy.
This table is for configuring the parameters
of HTTP probes. In particular, each HTTP probe
request may be sent with a number of fixed HTTP
headers. This table defines such fixed HTTP
headers sent with HTTP probes."
::= { cslbxServerProbes 3 }
cslbxProbeHeaderCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeHeaderCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry defines the HTTP header value
of a particular HTTP header name sent with a
particular HTTP probe, served by a particular SLB
entity."
INDEX {
slbEntity,
cslbxProbeHeaderProbeName,
cslbxProbeHeaderFieldName
}
::= { cslbxProbeHeaderCfgTable 1 }
CslbxProbeHeaderCfgEntry ::= SEQUENCE {
cslbxProbeHeaderProbeName SlbServerString,
cslbxProbeHeaderFieldName SnmpAdminString,
cslbxProbeHeaderFieldValue SnmpAdminString,
cslbxProbeHeaderRowStatus RowStatus
}
cslbxProbeHeaderProbeName OBJECT-TYPE
SYNTAX SlbServerString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the HTTP probe."
::= { cslbxProbeHeaderCfgEntry 1 }
cslbxProbeHeaderFieldName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An HTTP header of this name is transmitted in the
HTTP request sent by this probe."
::= { cslbxProbeHeaderCfgEntry 2 }
cslbxProbeHeaderFieldValue OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The HTTP header value associated with the HTTP header
name given by cslbxProbeHeaderFieldName."
::= { cslbxProbeHeaderCfgEntry 3 }
cslbxProbeHeaderRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object used by a management station to create
or delete the row entry in cslbxProbeHeaderTable
following the RowStatus textual convention."
::= { cslbxProbeHeaderCfgEntry 4 }
-- *************************************************************
-- * *
-- * SLB-EXT - Probe Expect Status Codes Configuration Table *
-- * *
-- *************************************************************
cslbxProbeExpectStatusCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeExpectStatusCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The probing function monitors the health of
real servers. The SLB device actively probes
real servers to determine if they are healthy.
This table is for configuring the expect status
codes returned by a server."
::= { cslbxServerProbes 4 }
cslbxProbeExpectStatusCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeExpectStatusCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry provides the configuration of a range of
expect status codes for a particular probe, served by
a particular SLB entity."
INDEX {
slbEntity,
cslbxProbeExpectStatusProbeName,
cslbxProbeExpectStatusMinValue
}
::= { cslbxProbeExpectStatusCfgTable 1 }
CslbxProbeExpectStatusCfgEntry ::= SEQUENCE {
cslbxProbeExpectStatusProbeName SlbServerString,
cslbxProbeExpectStatusMinValue Unsigned32,
cslbxProbeExpectStatusMaxValue Unsigned32,
cslbxProbeExpectStatusRowStatus RowStatus
}
cslbxProbeExpectStatusProbeName OBJECT-TYPE
SYNTAX SlbServerString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the probe."
::= { cslbxProbeExpectStatusCfgEntry 1 }
cslbxProbeExpectStatusMinValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The starting value of the expect status code range."
::= { cslbxProbeExpectStatusCfgEntry 2 }
cslbxProbeExpectStatusMaxValue OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ending value of the expect status code range."
::= { cslbxProbeExpectStatusCfgEntry 3 }
cslbxProbeExpectStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object used by a management station to create
or delete the row entry in
cslbxProbeExpectStatusCfgTable following the
RowStatus textual convention."
::= { cslbxProbeExpectStatusCfgEntry 4 }
-- *************************************************************
-- * *
-- * HTTP/HTTPS Probe Table *
-- * *
-- *************************************************************
cslbxProbeHTTPCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeHTTPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring attributes
applicable to HTTP and HTTPS probes.
This table supports configuration of the probe
attributes in addition to the HTTP attributes
configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to HTTP/HTTPS probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbeHttpRequestMethod
cslbxProbeHttpRequestUrl
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeTcpOpenTimeout
cslbxProbeConnTermination
cslbxProbePriority
cslbxProbePassCount
An HTTP probe establishes an HTTP connection to
a real server and then sends an HTTP request
and verifies the response.
This table is applicable only for the instance
value of cslbxProbeType 'httpProbe' or 'httpsProbe'."
::= { cslbxServerProbes 5 }
cslbxProbeHTTPCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeHTTPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in HTTP Probe configuration table.
An entry is created in the table when
an entry is created in cslbxProbeCfgTable
with cslbxProbeType 'httpProbe' or
'httpsProbe'.
An entry is deleted from this table when
corresponding entry (identified by the indices)
is deleted from cslbxProbeCfgTable.
Following objects are applicable to both
HTTP and HTTPS Probes:
cslbxProbeHTTPCfgVersion
cslbxProbeHTTPCfgPersistence
cslbxProbeHTTPCfgHashValid
cslbxProbeHTTPCfgHashName
Following objects are applicable only for
HTTPS Probes:
cslbxProbeHTTPCfgCipherSuite
cslbxProbeHTTPCfgSslTlsVersion
cslbxProbeHTTPCfgSslSessionReuse.
The 'cslbxProbeName' refers to the probe which
is created by adding an entry in
'cslbxProbeCfgTable' with cslbxProbeType
'httpProbe' or 'httpsProbe'."
INDEX {
slbEntity,
cslbxProbeName
}
::= { cslbxProbeHTTPCfgTable 1 }
CslbxProbeHTTPCfgEntry ::= SEQUENCE {
cslbxProbeHTTPCfgVersion INTEGER,
cslbxProbeHTTPCfgPersistence TruthValue,
cslbxProbeHTTPCfgHashValid TruthValue,
cslbxProbeHTTPCfgHashName SnmpAdminString,
cslbxProbeHTTPCfgCipherSuite INTEGER,
cslbxProbeHTTPCfgSslTlsVersion INTEGER,
cslbxProbeHTTPCfgSslSessionReuse TruthValue,
cslbxProbeHTTPSslTlsVersionSupported BITS
}
cslbxProbeHTTPCfgVersion OBJECT-TYPE
SYNTAX INTEGER {
httpOneDotZero(1),
httpOneDotOne(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents HTTP version for the probe.
The 'htpOneDotZero' specifies HTTP 1.0 protocol.
The 'htpOneDotOne' specifies HTTP 1.1 protocol."
REFERENCE
"RFC 1945 - Hypertext Transfer Protocol - HTTP/1.0
RFC 2616 - Hypertext Transfer Protocol - HTTP/1.1."
DEFVAL { httpOneDotOne }
::= { cslbxProbeHTTPCfgEntry 1 }
cslbxProbeHTTPCfgPersistence OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables/disables persistence for
HTTP(for both 1.0 and 1.1) probes.
The pure HTTP/1.0 requires that a seperate
TCP connection to be opened for each downloaded
object. The persistence allows TCP connections
to be re-used while requesting multiple objects
without incurring a overhead of opening a new
TCP connection."
DEFVAL { false }
::= { cslbxProbeHTTPCfgEntry 2 }
cslbxProbeHTTPCfgHashValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables the hash functionality.
If set to 'true', the cslbxProbeHTTPCfgHashName
is used. If set 'false' the value
specified in cslbxProbeHTTPCfgHashName
is not used."
DEFVAL { false }
::= { cslbxProbeHTTPCfgEntry 3 }
cslbxProbeHTTPCfgHashName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the hash value
for the probe."
::= { cslbxProbeHTTPCfgEntry 4 }
cslbxProbeHTTPCfgCipherSuite OBJECT-TYPE
SYNTAX INTEGER {
rsaOther(1),
rsaAny(2),
rsaWithRc4128Md5(3),
rsaWithRc4128Sha(4),
rsaWithdesCbcSha(5),
rsaWith3desEdeCbcSha(6),
rsaExportWithRc440Md5(7),
rsaExportWithDes40CbcSha(8),
rsaExport1024WithRc456Md5(9),
rsaExport1024WithDesCbcSha(10),
rsaExport1024WithRc456Sha(11),
rsaWithAes128CbcSha(12),
rsaWithAes256cbcSha(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents SSL Cipher suites to be
used for HTTPS probes.
The value 'rsa_any' is used for selecting a
random cipher.
The value 'rsaOther' specifies value other than
those defined in the object. This value can not
be written."
REFERENCE "RFC 2246 - TLS Protocol version 1.0."
DEFVAL { rsaOther }
::= { cslbxProbeHTTPCfgEntry 5 }
cslbxProbeHTTPCfgSslTlsVersion OBJECT-TYPE
SYNTAX INTEGER {
other(1),
sslv2(2),
sslv3(3),
tlsv1(4),
all(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the version of
the SSL/TLS protocol.
The possible value(s) are :
other : Version not applicable.
This value can not be set by the user.
sslv2 : SSL Version 2.0.
sslv3 : SSL Version 3.0.
tlsv1 : TLS Version 1.0.
all : All supported versions as reported in
cslbxProbeHTTPSslTlsVersionSupported
object."
REFERENCE "RFC 2246 - The TLS Protocol Version 1.0."
DEFVAL { sslv3 }
::= { cslbxProbeHTTPCfgEntry 6 }
cslbxProbeHTTPCfgSslSessionReuse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables/disables reusing of the SSL
Session ID. If set to 'true', SSL session ID will
be reused. If set to 'false', SSL session ID will
not be reused. In SSL, a new session ID is created
every time the client and the SSL module go through a
full key exchange and establish a new master secret key.
Enabling this object allows the SSL module to reuse the
master key on subsequent connections with the client,
which can speed up the SSL negotiation process."
::= { cslbxProbeHTTPCfgEntry 7 }
cslbxProbeHTTPSslTlsVersionSupported OBJECT-TYPE
SYNTAX BITS {
sslv3(0),
tlsv1(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the supported SSL/TLS versions.
sslv3 - SSL version 3.0.
tlsv1 - TLS version 1.0."
::= { cslbxProbeHTTPCfgEntry 8 }
-- *************************************************************
-- * *
-- * SIP Probe Table *
-- * *
-- *************************************************************
cslbxProbeSIPCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeSIPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring attributes
applicable to SIP probes.
The Session Initiation Protocol (SIP) is an ASCII-based,
application-layer control protocol that can be used to
establish, maintain, and terminate calls between two
or more endpoints. SIP is an alternative protocol
developed by the Internet Engineering Task Force (IETF)
for multimedia conferencing over IP.
This table supports configuration of the probe
attributes in addition to the attributes configured
in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to SIP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeTcpOpenTimeout
cslbxProbeConnTermination
cslbxProbeSocketReuse
cslbxProbePassCount
This table is applicable only if the value of
cslbxProbeType is 'sipProbe'."
::= { cslbxServerProbes 6 }
cslbxProbeSIPCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeSIPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in SIP Probe configuration table.
An entry is created in the table when
an entry is created in cslbxProbeCfgTable
with cslbxProbeType 'sipProbe'.
An entry is deleted from this table when
corresponding entry (identified by the indices)
is deleted from cslbxProbeCfgTable.
The 'cslbxProbeName' refers to the probe which
is created by adding an entry in
'cslbxProbeCfgTable' with cslbxProbeType
'sipProbe'."
INDEX {
slbEntity,
cslbxProbeName
}
::= { cslbxProbeSIPCfgTable 1 }
CslbxProbeSIPCfgEntry ::= SEQUENCE {
cslbxProbeSIPRegAddress SnmpAdminString
}
cslbxProbeSIPRegAddress OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the Registration address used
in SIP protocol. Users in a SIP network are identified
by unique SIP addresses. A SIP address is similar to an
e-mail address and is in the format of
'sip:userID@gateway.com'. The userID can be either a
user name or an E.164 address. An E.164 address is a
telephone number with a string of decimal digits that
uniquely indicates the public network termination point.
The number contains the information necessary to route
the call to this termination point."
DEFVAL { "" }
::= { cslbxProbeSIPCfgEntry 1 }
-- *************************************************************
-- * *
-- * FTP Probe Table *
-- * *
-- *************************************************************
cslbxProbeFTPCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeFTPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring attributes
applicable to FTP probes. This table supports
configuration of the probe attributes in addition
to the FTP attributes configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to FTP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeTcpOpenTimeout
cslbxProbeConnTermination
cslbxProbeSocketReuse
cslbxProbePassCount
This table is applicable only if the value of
cslbxProbeType is 'ftpProbe'."
::= { cslbxServerProbes 7 }
cslbxProbeFTPCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeFTPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in FTP Probe configuration table.
Each entry represents the FTP request,
File name and File type.
An entry is created in the table when
an entry is created in cslbxProbeCfgTable
with cslbxProbeType 'ftpProbe'.
An entry is deleted from this table when
corresponding entry (identified by the indices)
is deleted from cslbxProbeCfgTable.
The 'cslbxProbeName' refers to the probe which
is created by adding an entry in
'cslbxProbeCfgTable' with cslbxProbeType
'ftpProbe'."
INDEX {
slbEntity,
cslbxProbeName
}
::= { cslbxProbeFTPCfgTable 1 }
CslbxProbeFTPCfgEntry ::= SEQUENCE {
cslbxProbeFtpRequestMethod INTEGER,
cslbxProbeFtpRequestFileName SlbUrlString,
cslbxProbeFtpRequestFileType INTEGER
}
cslbxProbeFtpRequestMethod OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ls(2),
get(3),
put(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the FTP request to be used
in FTP probe packets.
The possible value(s) are:
other : other than the values mentioned below.
This value can not be written.
ls : list files.
get : Get request.
put : Put request."
DEFVAL { get }
::= { cslbxProbeFTPCfgEntry 1 }
cslbxProbeFtpRequestFileName OBJECT-TYPE
SYNTAX SlbUrlString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string representing the File Name
used in FTP Probe."
DEFVAL { "" }
::= { cslbxProbeFTPCfgEntry 2 }
cslbxProbeFtpRequestFileType OBJECT-TYPE
SYNTAX INTEGER {
ascii(1),
binary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type
of the data transferred from/to
in case of FTP requests."
DEFVAL { ascii }
::= { cslbxProbeFTPCfgEntry 3 }
-- *************************************************************
-- * *
-- * TFTP Probe Table *
-- * *
-- *************************************************************
cslbxProbeTFTPCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeTFTPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring attributes
applicable to TFTP probes. This table supports
configuration of the probe attributes in addition
to the TFTP attributes configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to TFTP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbePort
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbePassCount
This table is applicable only if the value of
cslbxProbeType is 'tftpProbe'."
::= { cslbxServerProbes 8 }
cslbxProbeTFTPCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeTFTPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in TFTP Probe configuration table.
Each entry represents the TFTP probe related
parameters.
An entry is created in the table when
an entry is created in cslbxProbeCfgTable
with cslbxProbeType 'tftpProbe'.
An entry is deleted from this table when
correspnding entry (identified by the indices)
is deleted from cslbxProbeCfgTable.
The 'cslbxProbeName' refers to the probe which
is created by adding an entry in
'cslbxProbeCfgTable' with cslbxProbeType
'tftpProbe'."
INDEX {
slbEntity,
cslbxProbeName
}
::= { cslbxProbeTFTPCfgTable 1 }
CslbxProbeTFTPCfgEntry ::= SEQUENCE {
cslbxProbeTftpRequestMethod INTEGER,
cslbxProbeTftpRequestFileName SlbUrlString,
cslbxProbeTftpRequestFileType INTEGER
}
cslbxProbeTftpRequestMethod OBJECT-TYPE
SYNTAX INTEGER {
get(1),
put(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the TFTP request to be used
in TFTP probe packets.
The possible value(s) are:
get : Get request.
put : Put request."
DEFVAL { get }
::= { cslbxProbeTFTPCfgEntry 1 }
cslbxProbeTftpRequestFileName OBJECT-TYPE
SYNTAX SlbUrlString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string representing the File Name
used in TFTP Probe."
DEFVAL { "" }
::= { cslbxProbeTFTPCfgEntry 2 }
cslbxProbeTftpRequestFileType OBJECT-TYPE
SYNTAX INTEGER {
ascii(1),
binary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type
of the data transferred from/to
in case of FTP requests."
DEFVAL { ascii }
::= { cslbxProbeTFTPCfgEntry 3 }
-- *************************************************************
-- * *
-- * IMAP Probe Table *
-- * *
-- *************************************************************
cslbxProbeIMAPCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CslbxProbeIMAPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring attributes
applicable to IMAP probe.
This table supports configuration of the probe
attributes in addition to the IMAP attributes
configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to IMAP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeConnTermination
cslbxProbePriority
cslbxProbePassCount
An IMAP probe initiates a IMAP session and then
attempts to retrieve e-mail from the server and
verifies the response.
This table is applicable only if the value of
cslbxProbeType is 'imapProbe'."
::= { cslbxServerProbes 9 }
cslbxProbeIMAPCfgEntry OBJECT-TYPE
SYNTAX CslbxProbeIMAPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in IMAP Probe configuration table.
Each entry represents the IMAP probe related
parameters.
An entry is created in the table when
an entry is created in cslbxProbeCfgTable
with cslbxProbeType 'imapProbe'.
An entry is deleted from this table when
corresponding entry (identified by the indices)
is deleted from cslbxProbeCfgTable.
The 'cslbxProbeName' refers to the probe which
is created by adding an entry in
'cslbxProbeCfgTable' with cslbxProbeType
'imapProbe'."
INDEX {
slbEntity,
cslbxProbeName
}
::= { cslbxProbeIMAPCfgTable 1 }
CslbxProbeIMAPCfgEntry ::= SEQUENCE {
cslbxProbeIMAPMailBox SnmpAdminString,
cslbxProbeIMAPMethodName SnmpAdminString
}
cslbxProbeIMAPMailBox OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for configuring
the IMAP Mailbox value."
REFERENCE "RFC 1730 Section 5.1 Mailbox Naming."
DEFVAL { "" }
::= { cslbxProbeIMAPCfgEntry 1 }
cslbxProbeIMAPMethodName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for configuring
the IMAP method. The value can be
any IMAP method. Some of the example(s) are:
FETCH, NOOP, STAT, RETR"
REFERENCE
"RFC 1730 Section 6.1 Client commands - Any State.
RFC 1730 Section 6.4 Client commands - Selected State."
DEFVAL { "" }
::= { cslbxProbeIMAPCfgEntry 2 }
ciscoSlbHealthMonMIBNotifs OBJECT IDENTIFIER
::= { ciscoSlbHealthMonMIB 0 }
ciscoSlbHealthMonMIBObjects OBJECT IDENTIFIER
::= { ciscoSlbHealthMonMIB 1 }
cshMonSfarmProbes OBJECT IDENTIFIER
::= { ciscoSlbHealthMonMIBObjects 1 }
ciscoSlbHealthMonMIBConformance OBJECT IDENTIFIER
::= { ciscoSlbHealthMonMIB 2 }
ciscoSlbHealthMonNotifObjects OBJECT IDENTIFIER
::= { ciscoSlbHealthMonMIBObjects 2 }
-- Conformance Information
ciscoSlbHealthMonMIBCompliances OBJECT IDENTIFIER
::= { ciscoSlbHealthMonMIBConformance 1 }
ciscoSlbHealthMonMIBGroups OBJECT IDENTIFIER
::= { ciscoSlbHealthMonMIBConformance 2 }
SlbProbeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The probe type for probing the health of a server.
'icmpProbe' : Probe server by sending ICMP
echo requests.
'tcpProbe' : Probe server by opening TCP
connections. TCP probe
establishes and removes connections.
'dnsProbe' : Probe server by sending DNS
queries. A DNS probe sends a
domain name resolve request to the
real server and verifies the returned
IP address.
'httpProbe' : Probe server by sending HTTP
requests. An HTTP probe establishes
and HTTP connection to a real server
and then sends an HTTP request and
verifies the response.
'ftpProbe' : Probe server by opening FTP
connections. An FTP probe
establishes a connection to
the real server and verifies
that a greeting from the
application was received.
'telnetProbe' : Probe server by opening Telnet
connections. A Telnet probe
establishes a connection to the
real server and verifies that a
greeting from the application was
received.
'smtpProbe' : Probe server by opening SMTP
connections. An SMTP probe
establishes a connection to the
real server and verifies that a
greeting from the application was
received.
'scriptedProbe' : Probe server by executable
script.
'undefined' : New probe type not yet defined.
'udpProbe' : Probe server by opening UDP ports.
'httpsProbe' : Probe server by sending HTTPS
requests.
'ldapProbe' : Probe server by connecting to LDAP
server.
'popProbe' : Probe server by initiating
POP/POP3 session.
'imapProbe' : Probe server by initiating
IMAP session.
'radiusProbe' : Probe server by connecting to
RADIUS server.
'tacacsProbe' : Probe server by connecting to
TACACS server.
'sipProbe' : Probe server by sending SIP
Commands.
'tftpProbe' : Probe server by sending tftp
requests.
'fingerProbe' : Probe server by sending the
command and waiting for the
response.
'echoProbe' : Probe server by sending the
data and response back.
'rtspProbe' : Probe server by sending the
RTSP requests.
'snmpProbe' : Probe server by sending the
SNMP requests."
SYNTAX INTEGER {
icmpProbe(1),
tcpProbe(2),
dnsProbe(3),
httpProbe(4),
ftpProbe(5),
telnetProbe(6),
smtpProbe(7),
scriptedProbe(8),
undefined(9),
udpProbe(10),
httpsProbe(11),
ldapProbe(12),
popProbe(13),
imapProbe(14),
radiusProbe(15),
tacacsProbe(16),
sipProbe(17),
tftpProbe(18),
fingerProbe(19),
echoProbe(20),
rtspProbe(21),
snmpProbe(22)
}
CiscoProbeHealthMonState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The health monitor state of the probe for a server.
The possible values are :
'other' : The health monitor state of the probe
when none of the other values apply.
'invalid' : Server is not being monitored.
Although user has tried to associate the
probe to the server, but due to some
internal problem it is actually not
associated.
'init' : server is configured but not tested.
'active' : server is active. All expected
responses received.
'failed' : probe has failed as expected responses
have failed beyond acceptable limits.
'disabled' : probe disabled due to server
being outofservice or no valid
ip address configured to server."
SYNTAX INTEGER {
other(1),
invalid(2),
init(3),
active(4),
failed(5),
disabled(6)
}
CiscoProbeInheritedPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of the inheritance for the probe port.
The possible values are :
'other' : The inherited port when none of the other
values apply.
'probe' : The inherited port is the probe's configured
port.
'real' : The inherited port is the port of the
real server to which the probe is associated.
'vip' : The inherited port is the port of the virtual
ip address.
'default' : The inherited port is the probe's default
port."
SYNTAX INTEGER {
other(1),
probe(2),
real(3),
vip(4),
default(5)
}
cshMonSfarmRealProbeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CshMonSfarmRealProbeStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table provides the statistics of a probe applied
to a real server. This will address probes configured
under a serverfarm and also under a real server.
Deprecated because of the change in index requirement."
::= { cshMonSfarmProbes 1 }
cshMonSfarmRealProbeStatsEntry OBJECT-TYPE
SYNTAX CshMonSfarmRealProbeStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Each entry provides the probe related
stats for a real server.
In the following cases one or more entries get created:
1. An entry gets created when an entry is created in the
cesRealServerProbeTable.
2. When an entry is created in
cslbxServerFarmProbeTable (identified by
INDEX cslbxServerFarmProbeFarmName), then entries are
created in this table with as many entries in
cesServerFarmRserverTable (identified by
INDEX slbServerFarmName) for the same server farm.
3. When an entry is created in
cesServerFarmRserverTable (identified by INDEX
slbServerFarmName), then entries are created in this
table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm.
In the following cases one or more entries get deleted:
1. An entry gets deleted when an entry is deleted from the
cesRealServerProbeTable.
2. When an entry is deleted from
cslbxServerFarmProbeTable (identified by
INDEX cslbxServerFarmProbeFarmName), then entries are
deleted from this table with as many entries in
cesServerFarmRserverTable (identified by
INDEX slbServerFarmName) for the same server farm.
3. When an entry is deleted from
cesServerFarmRserverTable (identified by INDEX
slbServerFarmName), then entries are deleted from this
table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm."
REFERENCE
"cesRealServerProbeTable and cesServerFarmRserverTable are
defined in CISCO-ENHANCED-SLB-MIB.
cslbxServerFarmProbeTable is defined in CISCO-SLB-EXT-MIB."
INDEX {
slbEntity,
cslbxProbeName,
slbServerFarmName,
cshMonSfarmRealServerName,
cshMonSfarmRealServerPort
}
::= { cshMonSfarmRealProbeStatsTable 1 }
CshMonSfarmRealProbeStatsEntry ::= SEQUENCE {
cshMonSfarmRealServerName SnmpAdminString,
cshMonSfarmRealServerPort InetPortNumber,
cshMonSfarmRealProbesPassed Counter32,
cshMonSfarmRealProbesFailed Counter32,
cshMonSfarmRealProbeHealthMonState CiscoProbeHealthMonState
}
cshMonSfarmRealServerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..255))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object identifies the name (unique identifier)
of the real server. This value must correspond to an entry
in cesServerFarmRserverTable (identified by INDEX
cesRserverName) or cesRealServerProbeTable
(identified by INDEX cesRserverName)."
REFERENCE
"cesServerFarmRserverTable and cesRealServerProbeTable
are defined in CISCO-ENHANCED-SLB-MIB."
::= { cshMonSfarmRealProbeStatsEntry 1 }
cshMonSfarmRealServerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The port number of the real server.
The value zero specifies that
port number is not used in conjunction
with real server IP Address. This value must correspond
to an entry in cesServerFarmRserverTable (identified by INDEX
cesServerFarmRserverPort) or cesRealServerProbeTable
(identified by INDEX cesServerFarmRserverPort)."
REFERENCE
"cesServerFarmRserverTable and cesRealServerProbeTable
are defined in CISCO-ENHANCED-SLB-MIB."
::= { cshMonSfarmRealProbeStatsEntry 2 }
cshMonSfarmRealProbesPassed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of probes passed for this real
server. The probe is identified as pass if
the real server returns a valid response."
::= { cshMonSfarmRealProbeStatsEntry 3 }
cshMonSfarmRealProbesFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of probes failed for this real
server. The probe is identified as failed
if the real server fails to provide a valid
response for a specified number of retries."
::= { cshMonSfarmRealProbeStatsEntry 4 }
cshMonSfarmRealProbeHealthMonState OBJECT-TYPE
SYNTAX CiscoProbeHealthMonState
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The health monitor state of the probe for this
real server."
DEFVAL { init }
::= { cshMonSfarmRealProbeStatsEntry 5 }
cshMonProbeTypeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CshMonProbeTypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the accumulated statistics for each
probe type."
::= { cshMonSfarmProbes 2 }
cshMonProbeTypeStatsEntry OBJECT-TYPE
SYNTAX CshMonProbeTypeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the cshMonProbeTypeStatsTable.
1. The entries in the table are created when the system
boots up.
2. There is no use case where the entries gets deleted.
The 'slbEntity'is used in identifying the module in which
configuration is applied. The 'cslbxProbeType' identifies the
type of the probe."
INDEX {
slbEntity,
cslbxProbeType
}
::= { cshMonProbeTypeStatsTable 1 }
CshMonProbeTypeStatsEntry ::= SEQUENCE {
cshMonProbeTotalSentProbes Counter32,
cshMonProbeTotalPassedProbes Counter32,
cshMonProbeTotalConnectionErrors Counter32,
cshMonProbeTotalReceivedRSTs Counter32,
cshMonProbeTotalReceiveTimeouts Counter32,
cshMonProbeTotalSendFailures Counter32,
cshMonProbeTotalFailedProbes Counter32,
cshMonProbeTotalRefusedConns Counter32,
cshMonProbeTotalOpenTimeouts Counter32,
cshMonProbeTotalActiveSockets Counter32
}
cshMonProbeTotalSentProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes sent to the
real servers."
::= { cshMonProbeTypeStatsEntry 1 }
cshMonProbeTotalPassedProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of passed probes. The probe
is identified as pass if the real server returns a valid
response."
::= { cshMonProbeTypeStatsEntry 2 }
cshMonProbeTotalConnectionErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes that received
connection errors while trying to connect to the real server."
::= { cshMonProbeTypeStatsEntry 3 }
cshMonProbeTotalReceivedRSTs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes that received
TCP RST."
::= { cshMonProbeTypeStatsEntry 4 }
cshMonProbeTotalReceiveTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes that suffered
receive timeouts."
::= { cshMonProbeTypeStatsEntry 5 }
cshMonProbeTotalSendFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes failed due to
internal errors. Internal errors are unexpected errors during
configuration, scheduling or processing a probe."
::= { cshMonProbeTypeStatsEntry 6 }
cshMonProbeTotalFailedProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of failed probes. The probe
is identified as failed if the real server fails to provide a
valid response for a specified number of retries."
::= { cshMonProbeTypeStatsEntry 7 }
cshMonProbeTotalRefusedConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes whose connections
were refused by the real servers."
::= { cshMonProbeTypeStatsEntry 8 }
cshMonProbeTotalOpenTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes that received
timeout while trying to open a connection to the real server."
::= { cshMonProbeTypeStatsEntry 9 }
cshMonProbeTotalActiveSockets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes that are
currently using a socket in the system."
::= { cshMonProbeTypeStatsEntry 10 }
cshMonServerfarmRealProbeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CshMonServerfarmRealProbeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the statistics of a probe applied
to a real server. This will address probes configured
under a serverfarm and also under a real server."
::= { cshMonSfarmProbes 3 }
cshMonServerfarmRealProbeStatsEntry OBJECT-TYPE
SYNTAX CshMonServerfarmRealProbeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides the probe related stats for a real server.
Please refer to 'probe port inheritance' explained in this
MODULE-IDENTITY description.
In the following cases one or more entries get created:
1. When an entry is created in cesRealServerProbeTable,
then an equal number of entries are created in this
table for each inherited port associated with each
probe instance.
2. When an entry is created in cslbxServerFarmProbeTable
(identified by INDEX cslbxServerFarmProbeFarmName), then
entries are created in this table with as many entries
in cesServerFarmRserverTable (identified by INDEX
slbServerFarmName) for the same server farm multiplied
by the number of inherited ports associated with each
probe instance.
3. When an entry is created in cesServerFarmRserverTable
(identified by INDEX slbServerFarmName), then entries
are created in this table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm
multiplied by the number of inherited ports associated
with each probe instance.
In the following cases one or more entries get deleted:
1. When an entry gets deleted from the
cesRealServerProbeTable, then an equal number of
entries are deleted in this table for each inherited
port associated with each probe instance.
2. When an entry is deleted from
cslbxServerFarmProbeTable (identified by
INDEX cslbxServerFarmProbeFarmName), then entries are
deleted from this table with as many entries in
cesServerFarmRserverTable (identified by
INDEX slbServerFarmName) for the same server farm
multiplied by the number of inherited ports associated
with each probe instance.
3. When an entry is deleted from
cesServerFarmRserverTable (identified by INDEX
slbServerFarmName), then entries are deleted from this
table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm
multiplied by the number of inherited ports associated
with each probe instance."
REFERENCE
"cesRealServerProbeTable and cesServerFarmRserverTable are
defined in CISCO-ENHANCED-SLB-MIB.
cslbxServerFarmProbeTable is defined in CISCO-SLB-EXT-MIB."
INDEX {
slbEntity,
cslbxProbeName,
slbServerFarmName,
cshMonServerfarmRealServerName,
cshMonServerfarmRealServerPort,
cshMonProbeInheritedPort
}
::= { cshMonServerfarmRealProbeStatsTable 1 }
CshMonServerfarmRealProbeStatsEntry ::= SEQUENCE {
cshMonServerfarmRealServerName SnmpAdminString,
cshMonServerfarmRealServerPort InetPortNumber,
cshMonProbeInheritedPort InetPortNumber,
cshMonServerfarmRealPassedProbes Counter32,
cshMonServerfarmRealFailedProbes Counter32,
cshMonServerfarmRealProbeHealthMonState CiscoProbeHealthMonState,
cshMonServerfarmRealProbeLastProbeTime DateAndTime,
cshMonServerfarmRealProbeLastActiveTime DateAndTime,
cshMonServerfarmRealProbeLastFailedTime DateAndTime,
cshMonProbeInheritedPortType CiscoProbeInheritedPortType
}
cshMonServerfarmRealServerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the name (unique identifier)
of the real server. This value must correspond to an entry
in cesServerFarmRserverTable (identified by INDEX
cesRserverName) or cesRealServerProbeTable
(identified by INDEX cesRserverName)."
REFERENCE
"cesServerFarmRserverTable and cesRealServerProbeTable
are defined in CISCO-ENHANCED-SLB-MIB."
::= { cshMonServerfarmRealProbeStatsEntry 1 }
cshMonServerfarmRealServerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the port number of the real server.
The value zero specifies that port number is not used in
conjunction with real server ip address. This value must
correspond to an entry in cesServerFarmRserverTable (identified
by INDEX cesServerFarmRserverPort) or cesRealServerProbeTable
(identified by INDEX cesServerFarmRserverPort)."
REFERENCE
"cesServerFarmRserverTable and cesRealServerProbeTable
are defined in CISCO-ENHANCED-SLB-MIB."
::= { cshMonServerfarmRealProbeStatsEntry 2 }
cshMonProbeInheritedPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the port number which is inherited by
the probe instance. Please refer to probe port inheritance
concept explained in this MODULE-IDENTITY description."
::= { cshMonServerfarmRealProbeStatsEntry 3 }
cshMonServerfarmRealPassedProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes passed for this
real server. The probe is identified as pass if the real
server returns a valid response."
::= { cshMonServerfarmRealProbeStatsEntry 4 }
cshMonServerfarmRealFailedProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of probes failed for this
real server. The probe is identified as failed if the real
server fails to provide a valid response for a specified
number of retries."
::= { cshMonServerfarmRealProbeStatsEntry 5 }
cshMonServerfarmRealProbeHealthMonState OBJECT-TYPE
SYNTAX CiscoProbeHealthMonState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the health monitor state of the probe
for this real server."
DEFVAL { init }
::= { cshMonServerfarmRealProbeStatsEntry 6 }
cshMonServerfarmRealProbeLastProbeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the date and time of the last probe."
::= { cshMonServerfarmRealProbeStatsEntry 7 }
cshMonServerfarmRealProbeLastActiveTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last date and time that the probe's
state transitioned to 'active'."
::= { cshMonServerfarmRealProbeStatsEntry 8 }
cshMonServerfarmRealProbeLastFailedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last date and time that the probes's
state transitioned to 'failed'."
::= { cshMonServerfarmRealProbeStatsEntry 9 }
cshMonProbeInheritedPortType OBJECT-TYPE
SYNTAX CiscoProbeInheritedPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indentifies the type of the inherited port
for this probe instance."
DEFVAL { default }
::= { cshMonServerfarmRealProbeStatsEntry 10 }
-- Notification related objects
cshMonSocketOverusageCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the number of times the probes socket
usage exceeded 90% in that minute."
::= { ciscoSlbHealthMonNotifObjects 1 }
-- Notifications
cshMonSocketOveruse NOTIFICATION-TYPE
OBJECTS { cshMonSocketOverusageCount }
STATUS current
DESCRIPTION
"The notification is generated when probes socket usage
exceeds or equals 90% atleast 100 times in one minute.
The object cshMonSocketOverusageCount represents the number
of times the probes socket usage exceeded 90 percentage
in that minute."
::= { ciscoSlbHealthMonMIBNotifs 1 }
cshMonSocketNormalUse NOTIFICATION-TYPE
OBJECTS { cshMonSocketOverusageCount }
STATUS current
DESCRIPTION
"The notification is generated when the probes socket usage
becomes normal i.e the socket usage does not exceed 90% 100 or
more times in that minute and after cshMonSocketOveruse
notification is generated.
The object cshMonSocketOverusageCount represents the number of
times the probes socket usage exceeded 90 percentage in that
minute."
::= { ciscoSlbHealthMonMIBNotifs 2 }
ciscoSlbHealthMonMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco SLB Health monitoring MIB."
MODULE -- this module
MANDATORY-GROUPS {
cslbHealthMonServerProbesGroup,
cslbHealthMonProbeCfgExtGroup
}
GROUP cslbHealthMonHTTPProbesCommmonGroup
DESCRIPTION
"This group is mandatory for the systems
which support HTTP probes."
GROUP cslbHealthMonHTTPSProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support HTTPS probes."
GROUP cslbHealthMonSIPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support SIP probes."
GROUP cslbHealthMonFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support FTP probes."
GROUP cslbHealthMonTFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support TFTP probes."
GROUP cslbHealthMonIMAPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support IMAP probes."
GROUP cslbHealthMonProbeScriptGroup
DESCRIPTION
"This group is madatory for the systems
which support scripted probes."
OBJECT cslbxProbeAlternateDestAddrType
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
OBJECT cslbxProbeAlternateDestAddr
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
::= { ciscoSlbHealthMonMIBCompliances 1 }
ciscoSlbHealthMonMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco SLB Health monitoring MIB."
MODULE -- this module
MANDATORY-GROUPS {
cslbHealthMonServerProbesGroup,
cslbHealthMonProbeCfgExtGroup
}
GROUP cslbHealthMonHTTPProbesCommmonGroup
DESCRIPTION
"This group is mandatory for the systems
which support HTTP probes."
GROUP cslbHealthMonHTTPSProbesGroupRev1
DESCRIPTION
"This group is mandatory for the systems
which support HTTPS probes."
GROUP cslbHealthMonSIPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support SIP probes."
GROUP cslbHealthMonFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support FTP probes."
GROUP cslbHealthMonTFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support TFTP probes."
GROUP cslbHealthMonIMAPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support IMAP probes."
GROUP cslbHealthMonProbeScriptGroup
DESCRIPTION
"This group is madatory for the systems
which support scripted probes."
OBJECT cslbxProbeAlternateDestAddrType
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
OBJECT cslbxProbeAlternateDestAddr
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
::= { ciscoSlbHealthMonMIBCompliances 2 }
ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco SLB Health monitoring MIB."
MODULE -- this module
MANDATORY-GROUPS {
cslbHealthMonServerProbesGroupRev1,
cslbHealthMonProbeCfgExtGroup,
cshMonSfarmrealserverProbeStatsGroup
}
GROUP cslbHealthMonHTTPProbesCommmonGroup
DESCRIPTION
"This group is mandatory for the systems
which support HTTP probes."
GROUP cslbHealthMonHTTPSProbesGroupRev1
DESCRIPTION
"This group is mandatory for the systems
which support HTTPS probes."
GROUP cslbHealthMonSIPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support SIP probes."
GROUP cslbHealthMonFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support FTP probes."
GROUP cslbHealthMonTFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support TFTP probes."
GROUP cslbHealthMonIMAPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support IMAP probes."
GROUP cslbHealthMonProbeScriptGroup
DESCRIPTION
"This group is madatory for the systems
which support scripted probes."
OBJECT cslbxProbeAlternateDestAddrType
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
OBJECT cslbxProbeAlternateDestAddr
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
::= { ciscoSlbHealthMonMIBCompliances 3 }
ciscoSlbHealthMonMIBComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco SLB Health monitoring MIB."
MODULE -- this module
MANDATORY-GROUPS {
cslbHealthMonServerProbesGroupRev1,
cslbHealthMonProbeCfgExtGroup,
cshMonSfarmrealserverProbeStatsGroupRev1,
cshMonProbeTypeStatsGroup
}
GROUP cslbHealthMonHTTPProbesCommmonGroup
DESCRIPTION
"This group is mandatory for the systems
which support HTTP probes."
GROUP cslbHealthMonHTTPSProbesGroupRev1
DESCRIPTION
"This group is mandatory for the systems
which support HTTPS probes."
GROUP cslbHealthMonSIPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support SIP probes."
GROUP cslbHealthMonFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support FTP probes."
GROUP cslbHealthMonTFTPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support TFTP probes."
GROUP cslbHealthMonIMAPProbesGroup
DESCRIPTION
"This group is mandatory for the systems
which support IMAP probes."
GROUP cslbHealthMonProbeScriptGroup
DESCRIPTION
"This group is madatory for the systems
which support scripted probes."
GROUP cshMonNotifObjectsGroup
DESCRIPTION
"This group is madatory for the systems
which supports socket usage notification."
GROUP cshMonNotifGroup
DESCRIPTION
"This group is madatory for the systems
which supports socket usage notification."
OBJECT cslbxProbeAlternateDestAddrType
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
OBJECT cslbxProbeAlternateDestAddr
DESCRIPTION
"An implementation is only required to support
IPv4 addresses."
::= { ciscoSlbHealthMonMIBCompliances 4 }
cslbHealthMonServerProbesGroup OBJECT-GROUP
OBJECTS {
cslbxProbeType,
cslbxProbeInterval,
cslbxProbeRetries,
cslbxProbeFailedInterval,
cslbxProbeReceiveTimeout,
cslbxProbeTcpOpenTimeout,
cslbxProbeAlternateDestAddrType,
cslbxProbeAlternateDestAddr,
cslbxProbeDnsDomainName,
cslbxProbeRowStatus,
cslbxDnsProbeIpRowStatus,
cslbxProbeExpectStatusMaxValue,
cslbxProbeExpectStatusRowStatus,
cslbxProbePort,
cslbxProbeDescription,
cslbxProbeProtocolType,
cslbxProbeRouteMethod,
cslbxProbePriority
}
STATUS deprecated
DESCRIPTION
"The second revision of the collection of SLB server
health probe objects."
::= { ciscoSlbHealthMonMIBGroups 1 }
cslbHealthMonProbeCfgExtGroup OBJECT-GROUP
OBJECTS {
cslbxProbeUserName,
cslbxProbePassword,
cslbxProbePassCount,
cslbxProbeConnTermination,
cslbxProbeSocketReuse,
cslbxProbeSendDataType,
cslbxProbeSendData
}
STATUS current
DESCRIPTION
"The collection of objects to configure
probes in an SLB device."
::= { ciscoSlbHealthMonMIBGroups 2 }
cslbHealthMonSIPProbesGroup OBJECT-GROUP
OBJECTS { cslbxProbeSIPRegAddress }
STATUS current
DESCRIPTION
"A collection of objects providing information
specific to SIP Probes."
::= { ciscoSlbHealthMonMIBGroups 3 }
cslbHealthMonFTPProbesGroup OBJECT-GROUP
OBJECTS {
cslbxProbeFtpRequestMethod,
cslbxProbeFtpRequestFileName,
cslbxProbeFtpRequestFileType
}
STATUS current
DESCRIPTION
"A collection of objects providing information
specific to FTP Probes."
::= { ciscoSlbHealthMonMIBGroups 4 }
cslbHealthMonHTTPProbesCommmonGroup OBJECT-GROUP
OBJECTS {
cslbxProbeHttpRequestMethod,
cslbxProbeHttpRequestUrl,
cslbxProbeHeaderFieldValue,
cslbxProbeHeaderRowStatus,
cslbxProbeHTTPCfgVersion,
cslbxProbeHTTPCfgPersistence,
cslbxProbeHTTPCfgHashValid,
cslbxProbeHTTPCfgHashName
}
STATUS current
DESCRIPTION
"A collection of objects providing information
specific to both HTTP and HTTPS Probes."
::= { ciscoSlbHealthMonMIBGroups 5 }
cslbHealthMonHTTPSProbesGroup OBJECT-GROUP
OBJECTS {
cslbxProbeHTTPCfgCipherSuite,
cslbxProbeHTTPCfgSslTlsVersion,
cslbxProbeHTTPCfgSslSessionReuse
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing information
specific to HTTPS Probes."
::= { ciscoSlbHealthMonMIBGroups 6 }
cslbHealthMonTFTPProbesGroup OBJECT-GROUP
OBJECTS {
cslbxProbeTftpRequestMethod,
cslbxProbeTftpRequestFileName,
cslbxProbeTftpRequestFileType
}
STATUS current
DESCRIPTION
"A collection of objects providing information
specific to TFTP Probes."
::= { ciscoSlbHealthMonMIBGroups 7 }
cslbHealthMonIMAPProbesGroup OBJECT-GROUP
OBJECTS {
cslbxProbeIMAPMailBox,
cslbxProbeIMAPMethodName
}
STATUS current
DESCRIPTION
"A collection of objects providing information
specific to IMAP Probes."
::= { ciscoSlbHealthMonMIBGroups 8 }
cslbHealthMonProbeScriptGroup OBJECT-GROUP
OBJECTS {
cslbxProbeScriptName,
cslbxProbeScriptArguments
}
STATUS current
DESCRIPTION
"The collection of objects to configure scripted
probes in an SLB device."
::= { ciscoSlbHealthMonMIBGroups 9 }
cslbHealthMonHTTPSProbesGroupRev1 OBJECT-GROUP
OBJECTS {
cslbxProbeHTTPCfgCipherSuite,
cslbxProbeHTTPCfgSslTlsVersion,
cslbxProbeHTTPCfgSslSessionReuse,
cslbxProbeHTTPSslTlsVersionSupported
}
STATUS current
DESCRIPTION
"A collection of objects providing information
specific to HTTPS Probes."
::= { ciscoSlbHealthMonMIBGroups 10 }
cslbHealthMonServerProbesGroupRev1 OBJECT-GROUP
OBJECTS {
cslbxProbeType,
cslbxProbeInterval,
cslbxProbeRetries,
cslbxProbeFailedInterval,
cslbxProbeReceiveTimeout,
cslbxProbeTcpOpenTimeout,
cslbxProbeAlternateDestAddrType,
cslbxProbeAlternateDestAddr,
cslbxProbeDnsDomainName,
cslbxProbeRowStatus,
cslbxDnsProbeIpRowStatus,
cslbxProbeExpectStatusMaxValue,
cslbxProbeExpectStatusRowStatus,
cslbxProbePort,
cslbxProbeDescription,
cslbxProbeProtocolType,
cslbxProbeRouteMethod,
cslbxProbePriority,
cslbxProbeState
}
STATUS current
DESCRIPTION
"The third revision of the collection of SLB server
health probe objects."
::= { ciscoSlbHealthMonMIBGroups 11 }
cshMonSfarmrealserverProbeStatsGroup OBJECT-GROUP
OBJECTS {
cshMonSfarmRealProbesPassed,
cshMonSfarmRealProbesFailed,
cshMonSfarmRealProbeHealthMonState
}
STATUS deprecated
DESCRIPTION
"Group of objects providing statistics of a probe applied
to a real server."
::= { ciscoSlbHealthMonMIBGroups 12 }
cshMonSfarmrealserverProbeStatsGroupRev1 OBJECT-GROUP
OBJECTS {
cshMonServerfarmRealPassedProbes,
cshMonServerfarmRealFailedProbes,
cshMonServerfarmRealProbeHealthMonState,
cshMonServerfarmRealProbeLastProbeTime,
cshMonServerfarmRealProbeLastActiveTime,
cshMonServerfarmRealProbeLastFailedTime,
cshMonProbeInheritedPortType
}
STATUS current
DESCRIPTION
"Group of objects providing statistics of a probe applied
to a real server."
::= { ciscoSlbHealthMonMIBGroups 13 }
cshMonProbeTypeStatsGroup OBJECT-GROUP
OBJECTS {
cshMonProbeTotalSentProbes,
cshMonProbeTotalPassedProbes,
cshMonProbeTotalConnectionErrors,
cshMonProbeTotalReceivedRSTs,
cshMonProbeTotalReceiveTimeouts,
cshMonProbeTotalSendFailures,
cshMonProbeTotalFailedProbes,
cshMonProbeTotalRefusedConns,
cshMonProbeTotalOpenTimeouts,
cshMonProbeTotalActiveSockets
}
STATUS current
DESCRIPTION
"Group of objects providing statistics per probe type."
::= { ciscoSlbHealthMonMIBGroups 14 }
cshMonNotifObjectsGroup OBJECT-GROUP
OBJECTS { cshMonSocketOverusageCount }
STATUS current
DESCRIPTION
"Group of notification objects."
::= { ciscoSlbHealthMonMIBGroups 15 }
cshMonNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cshMonSocketOveruse,
cshMonSocketNormalUse
}
STATUS current
DESCRIPTION
"A collection of objects providing healthmon notifications."
::= { ciscoSlbHealthMonMIBGroups 16 }
END
Reference in New Issue Copy Permalink