david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-SWITCH-ENGINE-MIB

7038 lines
250 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- Cisco Switch Engine MIB
--
-- February 2000, Steven To
-- July 2000, Edward Pham
-- February 2002, Edward Pham
-- February 2003, Edward Pham
-- May 2003, Jayakumar Kadirvelu
-- August 2003, Edward Pham
-- %DNP% March 2005, Jayakumar Kadirvelu
--
-- Copyright (c) 2000-2020 by cisco Systems Inc.
-- by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-SWITCH-ENGINE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Gauge32,
Counter32,
Counter64,
IpAddress,
Integer32,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex,
OwnerString,
InterfaceIndexOrZero
FROM IF-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
entPhysicalIndex
FROM ENTITY-MIB
TEXTUAL-CONVENTION,
DisplayString,
RowStatus,
TimeInterval,
MacAddress,
TruthValue,
TimeStamp
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MplsVpnId
FROM MPLS-VPN-MIB
CiscoNetworkProtocol,
CiscoPort
FROM CISCO-TC
VlanIndex
FROM CISCO-VTP-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoSwitchEngineMIB MODULE-IDENTITY
LAST-UPDATED "202005260000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"This MIB module defines management objects for Cisco Layer 2/3
switches. These devices may either have a single (central) switching
engine entity or may consist of multiple (distributed) switching
engine entities which are inter-connected via a common 'switching
fabric'. In the central switching engine model, all the physical
ports in the system are handled by the only switching engine in the
system. In the distributed switching model, each switching engine
will handle a set of 'local' physical ports and when necessary,
packets are also switched between switching engines over the
switching fabric.
Cisco L2/L3 switching devices use regular routers to assist them
in learning packet 'flows' by observing how a router routes a
candidate flow. A flow is some combination of source network address,
destination network address and the transport port numbers, as
applicable. Once a flow is established (learned), all traffic
belonging to that flow will be switched at Layer 3 by the switch
engine, effectively bypassing the router, until the flow has been
'aged' out. Most Cisco L2/L3 switching devices employ built-in
(internal) router module(s) for integrating Layer 3 switching with
Layer 2 forwarding. However, they can also learn 'flows' through
other physically-separate (external) Cisco routers that are
connected to the switch-engine through the network."
REVISION "202005260000Z"
DESCRIPTION
"Add enumerated value 304 - 308 to cseTcamResourceType."
REVISION "202003060000Z"
DESCRIPTION
"Add enumerated value 282 - 303 to cseTcamResourceType."
REVISION "201907110000Z"
DESCRIPTION
"Add enumerated value 232 - 281 to cseTcamResourceType."
REVISION "201806200000Z"
DESCRIPTION
"Add enumerated value 229 - 231 to cseTcamResourceType."
REVISION "201712070000Z"
DESCRIPTION
"Add enumerated value 86 - 228 to cseTcamResourceType."
REVISION "201302130000Z"
DESCRIPTION
"Add enumerated value 37 - 85 to cseTcamResourceType."
REVISION "201203120000Z"
DESCRIPTION
"Add cseStatisticsFlowGroup1."
REVISION "201012170000Z"
DESCRIPTION
"Add the following new enumerations to cseTcamResourceType:
dgtSgtRegion(31), anyAnyRegion(32), tcamALabel(33),
tcamBLabel(34), destInfoIn(35) and destInfoOut(36)."
REVISION "200811110000Z"
DESCRIPTION
"Add new enumerations to cseTcamResourceType."
REVISION "200801290000Z"
DESCRIPTION
"Add cseL3SwitchedPktsPerSecGroup.
Add cseCacheStatisticsGroup.
Add new enumerations to cseTcamResourceType.
Add new enumerations to cseFlowIPFlowMask object."
REVISION "200509160000Z"
DESCRIPTION
"Add cseFlowMcastMgmtGroup2.
Deprecate the objects:
cseFlowMcastQuerySrc,
cseFlowMcastQueryGrp,
cseFlowMcastResultGrp,
cseFlowMcastResultSrc.
Add new enumerations to cseFlowMcastQueryMask."
REVISION "200504120000Z"
DESCRIPTION
"Add new enumerations to cseFlowIPFlowMask object.
Add ingressInterfaceMapping and egressInterfaceMapping
enumerations to cseTcamResourceType object."
REVISION "200411150000Z"
DESCRIPTION
"Add cseMetUsageGroup."
REVISION "200406090000Z"
DESCRIPTION
"Add the following Groups:
cseNetflowASInfoExportGroup
cseNetflowPerVlanIfGroup"
REVISION "200311070000Z"
DESCRIPTION
"Add cseErrorStatsLCTable."
REVISION "200308200000Z"
DESCRIPTION
"Add the following tables to support forwarding information base:
cseCefFibTable,
cseCefAdjacencyTable.
Add the following table to support TCAM (Ternary Content
Addressable Memory) resource usage:
cseTcamUsageTable.
Add default value for the following objects:
cseFlowQuerySource,
cseFlowQuerySourceMask,
cseFlowQueryDestination,
cseFlowQueryDestinationMask,
cseFlowQueryOwner."
REVISION "200306100000Z"
DESCRIPTION
"Deprecated the objects:
cseNetflowLSExportHost,
cseNetflowLSExportTransportNumber"
REVISION "200305060000Z"
DESCRIPTION
"Added the object cseFlowQuerySkipNFlows"
REVISION "200302210000Z"
DESCRIPTION
"Added the following objects and table:
cseFlowLongAgingTime,
cseNetFlowIfIndexEnable,
cseFlowStatsTable,
cseFlowExcludeTable.
Modified the description of the following objects:
cseL2IpPkts,
cseL2IpxPkts,
cseL2AssignedProtoPkts,
cseL2OtherProtoPkts,
cseL2HCIpPkts,
cseL2HCIpxPkts,
cseL2HCAssignedProtoPkts,
cseL2HCOtherProtoPkts."
REVISION "200208050000Z"
DESCRIPTION
"Added the following objects: cseFlowIPFlowMask,
cseFlowIPXFlowMask, cseProtocolFilterEnable."
REVISION "200202070000Z"
DESCRIPTION
"Added the objects in cseBridgedFlowStatsCtrlTable and
cseErrorStatsTable.
Added the following objects:
cseL3VlanInUnicastPkts
cseL3VlanInUnicastOctets
cseL3VlanOutUnicastPkts
cseL3VlanOutUnicastOctets."
REVISION "200110260000Z"
DESCRIPTION
"Added the object cseFlowQueryTotalFlows"
REVISION "200109130000Z"
DESCRIPTION
"Added the follwowing objects
o cseNetflowLSFilterSupport
o cseNetflowLSFilterTable.
Also created the new groups
o cseNDEMandatoryGroup
o cseNDESingleFilterGroup
o cseNDEMultipleFiltersGroup"
REVISION "200105160000Z"
DESCRIPTION
"Added 4k Vlan support"
REVISION "200103090000Z"
DESCRIPTION
"Update the range of cseFlowEstablishedAgingTime,
cseFlowIPXEstablishedAgingTime, cseFlowOperEstablishedAgingTime,
cseFlowOperIPXAgingTime.
Replace cseFlowQueryResult with cseFlowQueryResultingRows."
REVISION "200006230000Z"
DESCRIPTION
"Added the following objects:
o cseFlowOperEstablishedAgingTime.
o cseFlowOperFastAgingTime.
o cseFlowOperFastAgePktThreshold.
o cseFlowOperIPXAgingTime."
REVISION "200001311130Z"
DESCRIPTION
"Added one High Capacity L2 Statistics table, an extension
of cseL2StatsTable and new objects in NetflowLS group for
new netflow export features. Also added a new enum type of
cseRouterFlowMask to support L3 multicast."
REVISION "9912091130Z"
DESCRIPTION
"Added MIB objects to manage Switch Engine (SE) portion of
Multicast MLS control protocol."
REVISION "9806241130Z"
DESCRIPTION
"Added 2 groups, for the purging (clearing) of layer 3 unicast and
multicast flow entries stored in the cache. Also added new objects
for layer 3 flow statistics."
REVISION "9805281130Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 97 }
-- Overview of MIB Objects:
--
-- Defines 9 groups of objects.
--
-- 1. cseL2Objects: Contains mainly Layer 2 statistics maintained by the
-- switching engine hardware.
--
-- 2. cseFlow: This group has all the important objects used in the
-- management of switching engine hardware. It contains :
-- - Scalars for configuring aging times that determine how long
-- certain learned flows, are used for L3 switching its traffic.
-- - A table of all routers whose "flows" are learned by the
-- switching
-- engine.
-- - A table for adding external routers to the router table and
-- enabling
-- the switching engine to learn of all the flows through those
-- routers.
-- - A table listing the MAC address and VLAN number used for each
-- router.
-- - A query/result table pair for monitoring the switching
-- performance
-- of the switching engine(s).
-- - A control table for enabling/disabling the flow switching
-- feature
-- per protocol type (ip, ipx).
--
-- 3. cseNetflowLS: A group of objects used to manage
-- the Netflow LAN Switching data export feature.
--
-- 4. cseL3Objects: Contains
-- - L3 statistics maintained by the switching engine hardware.
-- - L3 packet/octets statistics (in/out) maintained per vlan.
--
-- 5. cseProtocolFilter: Contains
-- - Table for configuring protocol filters per (non-trunking) port.
--
-- 6. cseUcastCache: Contains
-- - a MIB table to perform actions of purging IP/IPX
-- flows in switch engine cache pools.
--
-- 7. cseMcastCache:
-- - a MIB table to perform actions of purging IP
-- multicast flows in switch engine caches.
--
-- 8. cseCef: CEF (Cisco Express Forwarding) group. It contains:
-- - tables provide information on IP forwarding database
-- and statistics.
--
-- 9. cseTcamUsage: Contains
-- - table provides resource usage information on TCAM (Ternary
-- Content Addressable Memory) in the device.
--
-- 10. cseMet: MET group. It contains:
-- - table provides resource usage information on MET (Multicast
-- Expansion Table) in the device.
cseMIBObjects OBJECT IDENTIFIER
::= { ciscoSwitchEngineMIB 1 }
-- object groups
cseL2Objects OBJECT IDENTIFIER
::= { cseMIBObjects 1 }
cseFlow OBJECT IDENTIFIER
::= { cseMIBObjects 2 }
cseNetflowLS OBJECT IDENTIFIER
::= { cseMIBObjects 3 }
cseL3Objects OBJECT IDENTIFIER
::= { cseMIBObjects 4 }
cseProtocolFilter OBJECT IDENTIFIER
::= { cseMIBObjects 5 }
cseUcastCache OBJECT IDENTIFIER
::= { cseMIBObjects 6 }
cseMcastCache OBJECT IDENTIFIER
::= { cseMIBObjects 7 }
cseCef OBJECT IDENTIFIER
::= { cseMIBObjects 8 }
cseTcamUsage OBJECT IDENTIFIER
::= { cseMIBObjects 9 }
cseMet OBJECT IDENTIFIER
::= { cseMIBObjects 10 }
CiscoGauge64 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object with a nonnegative integer value
that may increase or decrease, with a maximum value of 2^64-1."
SYNTAX Counter64
ControlStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the current status of a controlled object
value."
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
McastGroupIp ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d.1d.1d.1d"
STATUS current
DESCRIPTION
"This TC specifies an multicast group IP address,
a class D IP address with the first byte in the range of
224 to 239."
SYNTAX IpAddress
FlowAddressComponent ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"Represents a network layer address. The length and format of
the address is protocol dependent as follows:
ip 6 octets
first 4 octets are the IP address in network
order
last 2 bytes is the transport's port number.
ipx 10 octets
first 4 octets are the net number
last 6 octets are the host number"
SYNTAX OCTET STRING (SIZE (6..6 | 10..10))
-- Layer 2 statistics per switching engine
cseL2StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseL2StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing switching engine's L2 statistics counters."
::= { cseL2Objects 1 }
cseL2StatsEntry OBJECT-TYPE
SYNTAX CseL2StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing L2 statistics maintained by a
switching engine (identified by entPhysicalIndex).
Each switching engine managed by this MIB module has an
entry in this table."
INDEX { entPhysicalIndex }
::= { cseL2StatsTable 1 }
CseL2StatsEntry ::= SEQUENCE {
cseL2ForwardedLocalPkts Counter32,
cseL2ForwardedLocalOctets Counter64,
cseL2ForwardedTotalPkts Counter32,
cseL2NewAddressLearns Counter32,
cseL2AddrLearnFailures Counter32,
cseL2DstAddrLookupMisses Counter32,
cseL2IpPkts Counter32,
cseL2IpxPkts Counter32,
cseL2AssignedProtoPkts Counter32,
cseL2OtherProtoPkts Counter32
}
cseL2ForwardedLocalPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received from ports local to this switching
engine and forwarded at layer 2."
::= { cseL2StatsEntry 1 }
cseL2ForwardedLocalOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets in the packets received from ports local to this
switching engine and forwarded at layer 2."
::= { cseL2StatsEntry 2 }
cseL2ForwardedTotalPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets received from all sources (local and over
the fabric) and forwarded at layer 2 by this switching engine."
::= { cseL2StatsEntry 3 }
cseL2NewAddressLearns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of new MAC addresses learned by the switching engine."
::= { cseL2StatsEntry 4 }
cseL2AddrLearnFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MAC addresses failed to be learned because the L2
forwarding address table was full. If the value keeps increasing,
the network topology should be reconfigured."
::= { cseL2StatsEntry 5 }
cseL2DstAddrLookupMisses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of misses during destination MAC address table lookups.
A few misses happen normally. Large numbers of misses occur as
a result of cseL2AddrLearnFailures."
::= { cseL2StatsEntry 6 }
cseL2IpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to the IP family received by this
switching engine from all sources. This value includes L3
switched packets."
::= { cseL2StatsEntry 7 }
cseL2IpxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to the IPX family received by this
switching engine from all sources. This value includes L3
switched packets."
::= { cseL2StatsEntry 8 }
cseL2AssignedProtoPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to an assigned group of network
protocols (typically AppleTalk, DecNet and Vines) received
by this switching engine from all sources.
This value includes L3 switched packets."
::= { cseL2StatsEntry 9 }
cseL2OtherProtoPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to all other protocol families,
received by this switching engine from all sources.
This value includes L3 switched packets."
::= { cseL2StatsEntry 10 }
-- High Capacity extensions for cseL2StatsTable.
cseL2StatsHCTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseL2StatsHCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the High Capacity L2 Statistics extensions to the
cseL2StatsTable."
::= { cseL2Objects 2 }
cseL2StatsHCEntry OBJECT-TYPE
SYNTAX CseL2StatsHCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the High Capacity L2 Statistics extensions to
cseL2StatsEntry. These objects will be created by the agent
for all cseL2StatsEntries it deems appropriate."
INDEX { entPhysicalIndex }
::= { cseL2StatsHCTable 1 }
CseL2StatsHCEntry ::= SEQUENCE {
cseL2HCOverflowForwardedLocalPkts Counter32,
cseL2HCForwardedLocalPkts Counter64,
cseL2HCOverflowForwardedTotalPkts Counter32,
cseL2HCForwardedTotalPkts Counter64,
cseL2HCOverflowIpPkts Counter32,
cseL2HCIpPkts Counter64,
cseL2HCOverflowIpxPkts Counter32,
cseL2HCIpxPkts Counter64,
cseL2HCOverflowAssignedProtoPkts Counter32,
cseL2HCAssignedProtoPkts Counter64,
cseL2HCOverflowOtherProtoPkts Counter32,
cseL2HCOtherProtoPkts Counter64
}
cseL2HCOverflowForwardedLocalPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated cseL2ForwardedLocalPkts
counter has overflowed."
::= { cseL2StatsHCEntry 1 }
cseL2HCForwardedLocalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received from ports local to this switching
engine and forwarded at layer 2."
::= { cseL2StatsHCEntry 2 }
cseL2HCOverflowForwardedTotalPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated cseL2ForwardeTotalPkts counter
has overflowed."
::= { cseL2StatsHCEntry 3 }
cseL2HCForwardedTotalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets received from all sources
(local and over the fabric) and forwarded at layer 2
by this switching engine."
::= { cseL2StatsHCEntry 4 }
cseL2HCOverflowIpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated cseL2IpPkts counter
has overflowed."
::= { cseL2StatsHCEntry 5 }
cseL2HCIpPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to the IP family received by this
switching engine from all sources. This value includes
L3 switched packets."
::= { cseL2StatsHCEntry 6 }
cseL2HCOverflowIpxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated cseL2IpxPkts counter
has overflowed."
::= { cseL2StatsHCEntry 7 }
cseL2HCIpxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to the IPX family received by this
switching engine from all sources.
This value includes L3 switched packets."
::= { cseL2StatsHCEntry 8 }
cseL2HCOverflowAssignedProtoPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated cseL2HCAssignedProtoPkts
counter has overflowed."
::= { cseL2StatsHCEntry 9 }
cseL2HCAssignedProtoPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to an assigned group of network
protocols (typically AppleTalk, DecNet and Vines) received
by this switching engine from all sources.
This value includes L3 switched packets."
::= { cseL2StatsHCEntry 10 }
cseL2HCOverflowOtherProtoPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated cseL2HCOtherProtoPkts
counter has overflowed."
::= { cseL2StatsHCEntry 11 }
cseL2HCOtherProtoPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets belonging to all other protocol families,
received by this switching engine from all sources. This value
includes L3 switched packets."
::= { cseL2StatsHCEntry 12 }
-- Flow group of objects
--
-- Global aging times for the flows learned
cseFlowEstablishedAgingTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The adminstrative aging time for IP established flows.
The default value for this object is implementation specific.
If the cseFlowEstablishedAgingTime is not configured to the
appropriate value, it will be adjusted to the closest value.
The corresponding operational object, taken effect on the
a device, is cseFlowOperIPEstablishedAgingTime."
::= { cseFlow 1 }
cseFlowFastAgingTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative fast aging time for the established flow
entries, that have less number of packets than the value set in
the cseFlowFastAgePktThreshold, switched within this time.
Setting to value of 0 turns off fast aging.
The default value for this object is implementation specific.
If the cseFlowFastAgingTime is not configured to the
appropriate value, it will be adjusted to the closest value.
The corresponding operational object, taken effect on the
device, is cseFlowOperFastAgingTime."
::= { cseFlow 2 }
cseFlowFastAgePktThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative packet threshold setting for the
cseFlowFastAgingTime. The default for Fast Aging Packet
Threshold is 0, i.e. no packets switched within the time
set in cseFlowFastAgingTime, after an L3 flow was established.
If the cseFlowFastAgingTime is not configured to the
appropriate value, it will be adjusted to the closest value.
The corresponding operational object, taken effect on the
device, is cseFlowOperFastAgePktThreshold."
::= { cseFlow 3 }
-- Router Table
cseRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about all routers that are
discovered by the switch, including internal and external
routers."
::= { cseFlow 4 }
cseRouterEntry OBJECT-TYPE
SYNTAX CseRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cseRouterTable containing information
about a router. A row appears either directly through dynamic
learning or indirectly through management configuration
(via SNMP,by creating an entry in the
cseStaticExtRouterTable or via CLI)."
INDEX { cseRouterIndex }
::= { cseRouterTable 1 }
CseRouterEntry ::= SEQUENCE {
cseRouterIndex IpAddress,
cseRouterFlowMask INTEGER,
cseRouterName DisplayString,
cseRouterStatic TruthValue,
cseRouterIpxFlowMask INTEGER
}
cseRouterIndex OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The router's IP address which is used to uniquely identify
it for L3 flows."
::= { cseRouterEntry 1 }
cseRouterFlowMask OBJECT-TYPE
SYNTAX INTEGER {
dstOnly(1),
srcDst(2),
fullFlow(3),
notApplicable(4),
srcDstVlan(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP type of mask configured for the router represented by
this row. Each flow known to the switching engine has a mask
which is applied to all packets in order to compare them to
that flow. Each hardware-learned flow has the mask configured
for the router which logically forwards that flow."
::= { cseRouterEntry 2 }
cseRouterName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DNS name (if available) of the router."
::= { cseRouterEntry 3 }
cseRouterStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of the object is true, this router was
configured via SNMP or CLI. Otherwise, this router was
learned automatically."
::= { cseRouterEntry 4 }
cseRouterIpxFlowMask OBJECT-TYPE
SYNTAX INTEGER {
dstOnly(1),
srcDst(2),
fullFlow(3),
notApplicable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPX type of mask configured for the router represented by
this row. Each flow known to the switching engine has a mask
which is applied to all packets in order to compare them to
that flow. Each hardware-learned flow has the mask configured
for the router which logically forwards that flow."
::= { cseRouterEntry 5 }
-- Table of external routers that are enabled.
cseStaticExtRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseStaticExtRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of external routers which are enabled for Layer 3 IP
switching by the switching engine. This table may contain
routers that have not yet been discovered by the device."
::= { cseFlow 5 }
cseStaticExtRouterEntry OBJECT-TYPE
SYNTAX CseStaticExtRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cseStaticExtRouterTable for
enabling an external router to be installed in the switch's
router table. The entry is created and deleted by using
cseStaticRouterStatus."
INDEX { cseRouterIndex }
::= { cseStaticExtRouterTable 1 }
CseStaticExtRouterEntry ::= SEQUENCE {
cseStaticRouterName DisplayString,
cseStaticRouterOwner OwnerString,
cseStaticRouterStatus RowStatus,
cseStaticRouterType BITS
}
cseStaticRouterName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DNS name (if available) of the external router."
::= { cseStaticExtRouterEntry 1 }
cseStaticRouterOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"String indicating the owner who created the static entry."
::= { cseStaticExtRouterEntry 2 }
cseStaticRouterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage creation and deletion of rows in this table.
Once a row becomes active, values within that row cannot be
modified except by deleting and creating the row."
::= { cseStaticExtRouterEntry 3 }
-- per Router, per VLAN MAC address table for the flows
cseStaticRouterType OBJECT-TYPE
SYNTAX BITS {
unicast(0),
multicast(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates if the router is included for unicast switching,
or multicast switching, or both."
DEFVAL { { unicast } }
::= { cseStaticExtRouterEntry 4 }
cseRouterVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseRouterVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the MAC address used by routers on
particular VLANs."
::= { cseFlow 6 }
cseRouterVlanEntry OBJECT-TYPE
SYNTAX CseRouterVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the cseRouterVlanTable.
An entry exists for each known VLAN of each known router."
INDEX {
cseRouterIndex,
cseRouterMac,
cseRouterVlan
}
::= { cseRouterVlanTable 1 }
CseRouterVlanEntry ::= SEQUENCE {
cseRouterMac MacAddress,
cseRouterVlan VlanIndex,
cseRouterProtocol BITS
}
cseRouterMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac address used by the router for this VLAN number."
::= { cseRouterVlanEntry 1 }
cseRouterVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vlan number associated with the router's MAC address."
::= { cseRouterVlanEntry 2 }
cseRouterProtocol OBJECT-TYPE
SYNTAX BITS {
ip(0),
ipx(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates which protocols are routed by this router on this
VLAN using this Mac address."
::= { cseRouterVlanEntry 3 }
-- Unicast Flow Query table
cseFlowMaxQueries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of query entries allowed to be outstanding at
any time, in the cseFlowQueryTable. The typical value for
this object is 5."
::= { cseFlow 7 }
cseFlowQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseFlowQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A control table used to query the switching engine by
specifying retrieval criteria for L3 flows.
The resulting data for each instance of a query in this
table is returned in the cseFlowDataTable.
The maximum number of entries (rows) in this table
cannot exceed the value returned by cseFlowMaxQueries."
::= { cseFlow 8 }
cseFlowQueryEntry OBJECT-TYPE
SYNTAX CseFlowQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the cesFlowQueryTable used to setup
retrieval criteria to search for L3 flows on a particular
switching engine entity identified by entPhysicalIndex.
The actual search is started by setting the value of
cseFlowQueryStatus to 'active'. Once a row becomes active,
values within the row cannot be modified, except by
deleting and re-creating the row."
INDEX {
entPhysicalIndex,
cseFlowQueryIndex
}
::= { cseFlowQueryTable 1 }
CseFlowQueryEntry ::= SEQUENCE {
cseFlowQueryIndex Unsigned32,
cseFlowQueryMask INTEGER,
cseFlowQueryTransport BITS,
cseFlowQuerySource FlowAddressComponent,
cseFlowQuerySourceMask FlowAddressComponent,
cseFlowQueryDestination FlowAddressComponent,
cseFlowQueryDestinationMask FlowAddressComponent,
cseFlowQueryRouterIndex IpAddress,
cseFlowQueryOwner OwnerString,
cseFlowQueryResultingRows Integer32,
cseFlowQueryResultTotalPkts CiscoGauge64,
cseFlowQueryResultTotalOctets CiscoGauge64,
cseFlowQueryResultAvgDuration TimeInterval,
cseFlowQueryResultAvgIdle TimeInterval,
cseFlowQueryStatus RowStatus,
cseFlowQueryCreateTime TimeStamp,
cseFlowQueryTotalFlows Unsigned32,
cseFlowQuerySkipNFlows Integer32
}
cseFlowQueryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which uniquely identifies the control
query among all those specified for the switching engine
indicated by entPhysicalIndex."
::= { cseFlowQueryEntry 1 }
cseFlowQueryMask OBJECT-TYPE
SYNTAX INTEGER {
dstOnly(1),
srcOrDst(2),
srcAndDst(3),
fullFlow(4),
ipxDstOnly(5),
ipxSrcAndDst(6),
any(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting each value causes the appropriate action:
'dstOnly' - causes the creation of rows in the
cseFlowDataTable corresponding to the current L3 flow
information for the absolute destination IP address
set in the cseFlowQueryDestination object in this table.
If cseFlowQueryDestinationMask is also specified at the
same time, it will be applied to the address part of
cseFlowQueryDestination.
'srcOrDst' - causes the creation of rows in the
cseFlowDataTable corresponding to the current L3 flow
information for EITHER of the absolute IP addresses set in
the cseFlowQueryDestination or cseFlowQuerySource objects.
If either of cseFlowQueryDestinationMask and
cseFlowQuerySourceMask
objects are also specified at the same time,
they will be applied to the respective address parts
of cseFlowQueryDestination and cseFlowQuerySource
objects. This option is typically used to
setup queries for flows on traffic in either directions.
'srcAndDst' - causes the creation of rows in the
cseFlowDataTable corresponding to the current L3 flow
information for BOTH the absolute IP addresses set in
the cseFlowQueryDestination and cseFlowQuerySource objects.
If either of cseFlowQueryDestinationMask and
cseFlowQuerySourceMask objects are also specified
at the same time, they will be applied to the
respective address parts of cseFlowQueryDestination and
cseFlowQuerySource objects. This option is typically used to
setup queries for flows on traffic in one direction only.
'fullFlow' - causes the creation of row(s) in the
cseFlowDataTable exactly corresponding to the current
L3 flow information for the complete IP flow (including the
transport port numbers) set in the cseFlowQueryDestination and
cseFlowQuerySource objects. If either of
cseFlowQueryDestinationMask and cseFlowQuerySourceMask
objects are also specified at the same
time, they will be applied to the respective address parts of
cseFlowQueryDestination and cseFlowQuerySource objects.
This option is typically used to setup queries for flows
on traffic for specific (TCP/UDP) port numbers
corresponding to standard protocols such as FTP,
WWW, TELNET, etc.
'ipxDstOnly' - causes the creation of rows in the
cseFlowDataTable corresponding to the current L3 flow
information for the absolute destination IPX address
set in the cseFlowQueryDestination object in this table.
If cseFlowQueryDestinationMask is also specified at
the same time, it will be applied to the address part
of cseFlowQueryDestination.
'ipxSrcAndDst' - causes the creation of rows in the
cseFlowDataTable corresponding to the current L3 flow
information for BOTH the absolute IPX addresses set in
the cseFlowQueryDestination and cseFlowQuerySource objects.
If either of cseFlowQueryDestinationMask and
cseFlowQuerySourceMask objects are also specified at the
same time, they will be applied to the respective address
parts of cseFlowQueryDestination and
cseFlowQuerySource objects.
'any' - returns all rows corresponding to all established
flow entries in the cseFlowDataTable.
Note:
1. The type FlowAddressComponent used for objects
cseFlowQuerySource and cseFlowQueryDestination, has the
network address part and also the transport port
number part, if applicable.
2. The value of this object cannot be modified when the
corresponding instance of cseFlowQueryStatus is 'active'."
DEFVAL { any }
::= { cseFlowQueryEntry 2 }
cseFlowQueryTransport OBJECT-TYPE
SYNTAX BITS {
udp(0),
tcp(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP transport protocol type specified for this query. Ignored
for IPX flow queries. The value of this object cannot be
modified when the corresponding instance of cseFlowQueryStatus
is 'active'."
DEFVAL { { udp , tcp } }
::= { cseFlowQueryEntry 3 }
cseFlowQuerySource OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source network address and port (if applicable). The
value of this object cannot be modified when the
corresponding instance of
cseFlowQueryStatus is 'active'."
DEFVAL { '000000000000'H }
::= { cseFlowQueryEntry 4 }
cseFlowQuerySourceMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source address mask to be applied to the corresponding
instance of cseFlowQuerySource. The value of this object
cannot be modified when the corresponding instance of
cseFlowQueryStatus is 'active'."
DEFVAL { 'FFFFFFFFFFFF'H }
::= { cseFlowQueryEntry 5 }
cseFlowQueryDestination OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination network address and port (if applicable).
The value of this object cannot be modified when the
corresponding instance of cseFlowQueryStatus is 'active'."
DEFVAL { '000000000000'H }
::= { cseFlowQueryEntry 6 }
cseFlowQueryDestinationMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination address mask to be applied to the corresponding
instance of cseFlowQueryDestination. The value of this object
cannot be modified when the corresponding instance of
cseFlowQueryStatus is 'active'."
DEFVAL { 'FFFFFFFFFFFF'H }
::= { cseFlowQueryEntry 7 }
cseFlowQueryRouterIndex OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the router for which the flows are available.
An 'all-zero' IP address indicates that the query is for
any router. The value of this object cannot be modified
when the corresponding instance of cseFlowQueryStatus
is 'active'."
::= { cseFlowQueryEntry 8 }
cseFlowQueryOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The manager entity that configured this entry and is therefore
using the resources assigned to it."
DEFVAL { "" }
::= { cseFlowQueryEntry 9 }
cseFlowQueryResultingRows OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result status of the query. Possible values are:
-1 - Either the query has not been initiated or
the agent is busy processing this query instance.
Time to completion of the query processing
depends on the complexity of the query and
the number of matches that satisfy this query.
0..2147483647 - The search has ended and this is the number of
rows in the cseFlowDataTable, resulting
from this query."
::= { cseFlowQueryEntry 10 }
cseFlowQueryResultTotalPkts OBJECT-TYPE
SYNTAX CiscoGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregate number of total packets switched by the system on
all the flows matching this query. This is a snapshot value and
is valid only when the corresponding instance of
cseFlowQueryResultingRows is greater than or equal to 0."
::= { cseFlowQueryEntry 11 }
cseFlowQueryResultTotalOctets OBJECT-TYPE
SYNTAX CiscoGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregate number of total octets switched by the system on
all the flows matching this query. This is a snapshot value
and is valid only when the corresponding instance of
cseFlowQueryResultingRows is greater than or equal to 0."
::= { cseFlowQueryEntry 12 }
cseFlowQueryResultAvgDuration OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average duration of the flows matching this query. This is
a snapshot value and is valid only when the corresponding
instance of cseFlowQueryResultingRows is greater
than or equal to 0."
::= { cseFlowQueryEntry 13 }
cseFlowQueryResultAvgIdle OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time since the flows were last used, averaged over
all flows matching this query. This is a snapshot value
and is valid only when the corresponding instance of
cseFlowQueryResultingRows is greater than or equal to 0."
::= { cseFlowQueryEntry 14 }
cseFlowQueryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage rows in this table.
When set to active(1), the query is initiated.
Once initiated, the value may
not be modified until the value of cseFlowQueryResultingRows is
greater than or equal to 0. However, this object can be set to
active(1) only after all the appropriate objects for this query
as defined by the value set in the cseFlowQueryMask object,
have also been set.
Once a row becomes active, values within the row cannot
be modified, except by deleting and re-creating it."
::= { cseFlowQueryEntry 15 }
cseFlowQueryCreateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when this query was created."
::= { cseFlowQueryEntry 16 }
cseFlowQueryTotalFlows OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of L3 flows matching the query criterion."
::= { cseFlowQueryEntry 17 }
cseFlowQuerySkipNFlows OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of searched flows to be skipped before storing
any L3 flows in cseFlowDataTable.
This object can be used along with cseFloQueryTotalFlows
object to skip previously found flows by setting the variable
equal to the number of the associated rows in
cseFlowDataTable, and only query the remaining flows
in the table.
Note that due to the dynamical nature of the L3 flows, the
queried flows may be missed or repeated by setting this object.
The value of this object cannot be modified
when the corresponding instance of cseFlowQueryStatus
is 'active'."
DEFVAL { 0 }
::= { cseFlowQueryEntry 18 }
-- The Unicast Flow query results data table
cseFlowDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseFlowDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing L3 flow information corresponding to all
the completed queries setup in the cseFlowQueryTable, that were
initiated on the switch engine(s)."
::= { cseFlow 9 }
cseFlowDataEntry OBJECT-TYPE
SYNTAX CseFlowDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the cseFlowDataTable used to return
information about one of the L3 flows which matched the
search criteria set by the cseFlowQueryMask object in the
corresponding instance of the cseFlowQueryTable."
INDEX {
entPhysicalIndex,
cseFlowQueryIndex,
cseFlowDataIndex
}
::= { cseFlowDataTable 1 }
CseFlowDataEntry ::= SEQUENCE {
cseFlowDataIndex Unsigned32,
cseFlowDataSrcMac MacAddress,
cseFlowDataDstMac MacAddress,
cseFlowDataStaticFlow TruthValue,
cseFlowDataEncapType INTEGER,
cseFlowDataSource FlowAddressComponent,
cseFlowDataDestination FlowAddressComponent,
cseFlowDataDestVlan VlanIndex,
cseFlowDataIpQOS Integer32,
cseFlowDataIpQOSPolicy Integer32,
cseFlowDataWhenCreated TimeStamp,
cseFlowDataLastUsed TimeStamp,
cseFlowDataPkts Gauge32,
cseFlowDataOctets CiscoGauge64
}
cseFlowDataIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number to uniquely identify a result entry that matches a
particular query for a specific switching engine."
::= { cseFlowDataEntry 1 }
cseFlowDataSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source Mac Address of the router's outgoing interface."
::= { cseFlowDataEntry 2 }
cseFlowDataDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination Mac Address used to forward the packets in
this flow."
::= { cseFlowDataEntry 3 }
cseFlowDataStaticFlow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this flow was software-installed."
::= { cseFlowDataEntry 4 }
cseFlowDataEncapType OBJECT-TYPE
SYNTAX INTEGER {
ipArpa(1),
ipxEthernet(2),
ipx802raw(3),
ipx802sap(4),
ipx802snap(5),
other(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocol encapsulation type used to forward packets in this flow
to their destination."
::= { cseFlowDataEntry 5 }
cseFlowDataSource OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source network address and the port (if appropriate) of this
flow."
::= { cseFlowDataEntry 6 }
cseFlowDataDestination OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination network address and port (if appropriate) of this
flow."
::= { cseFlowDataEntry 7 }
cseFlowDataDestVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan number on which packets belonging to this flow are
forwarded."
::= { cseFlowDataEntry 8 }
cseFlowDataIpQOS OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Level of Quality of service for this IP flow.
If it is not an IP flow, this object will not be instantiated."
::= { cseFlowDataEntry 9 }
cseFlowDataIpQOSPolicy OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Level of the Quality of service policy for this IP flow.
If it is not an IP flow, this object will not be instantiated."
::= { cseFlowDataEntry 10 }
cseFlowDataWhenCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when this flow was created in the switching engine."
::= { cseFlowDataEntry 11 }
cseFlowDataLastUsed OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since this flow was last used to forward a packet by the
switching engine."
::= { cseFlowDataEntry 12 }
cseFlowDataPkts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot value of the number of packets forwarded on this flow
at the time of corresponding query."
::= { cseFlowDataEntry 13 }
cseFlowDataOctets OBJECT-TYPE
SYNTAX CiscoGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot value of octets forwarded on this flow at the time of
corresponding query."
::= { cseFlowDataEntry 14 }
cseFlowSwitchControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseFlowSwitchControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table used to control the L3 flow switching operation, per
protocol type."
::= { cseFlow 10 }
cseFlowSwitchControlEntry OBJECT-TYPE
SYNTAX CseFlowSwitchControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for the configuration of Flow switching
feature for an L3 protocol type."
INDEX { cseFlowSwitchProtocol }
::= { cseFlowSwitchControlTable 1 }
CseFlowSwitchControlEntry ::= SEQUENCE {
cseFlowSwitchProtocol CiscoNetworkProtocol,
cseFlowSwitchStatus ControlStatus
}
cseFlowSwitchProtocol OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol type for which this row instance. Only ip(1) and ipx(14)
values are currently supported."
::= { cseFlowSwitchControlEntry 1 }
cseFlowSwitchStatus OBJECT-TYPE
SYNTAX ControlStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current status of the global flow switching capability for
the specified L3 protocol type."
::= { cseFlowSwitchControlEntry 2 }
-- Multicast Flow Query table
cseFlowMcastMaxQueries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of query entries allowed to be outstanding
at any time, in the cseFlowMcastQueryTable. The typical value
for this object is 5."
::= { cseFlow 11 }
cseFlowMcastQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseFlowMcastQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A control table used to query the switching engine by
specifying retrieval criteria for IP multicast L3 flows.
Each row instance in the table represents a query with
its parameters. The resulting data for each instance of
a query in this table is returned in the
cseFlowMcastResultTable.
The maximum number of entries (rows) in this table cannot
exceed the value of cseFlowMcastMaxQueries object.
Unlike unicast switched layer 3 flows, an IP multicast
switched flow is created and installed by software, and
is uniquely identified by flow's source IP address, and
multicast group IP address. It is stored with input Vlan
ID in the cache entry, so that the packets in the flow
will not be replicated and forwarded to the receivers on the
same (input) Vlan.
Another difference is that all IP multicast hardware
switched flows belonging to the same (source, group) are
stored only on one switch engine on a Cisco L3 switch with
distributed switch engines, whereas unicast flows identified
by certain criterion may resident on multiple switch engines
in the system."
::= { cseFlow 12 }
cseFlowMcastQueryEntry OBJECT-TYPE
SYNTAX CseFlowMcastQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the cesMcastFlowQueryTable used to
setup retrieval criteria to search for IP multicast L3
flows on all switching engine entities in the device.
The actual search is started by setting the value of
cseFlowMcastQueryStatus to 'active'. Once a row becomes
active, values within the row cannot be modified, without
setting the associated RowStatus object to 'notInService'
first, or deleting and re-creating the row."
INDEX { cseFlowMcastQueryIndex }
::= { cseFlowMcastQueryTable 1 }
CseFlowMcastQueryEntry ::= SEQUENCE {
cseFlowMcastQueryIndex Unsigned32,
cseFlowMcastQueryMask BITS,
cseFlowMcastQuerySrc IpAddress,
cseFlowMcastQueryGrp McastGroupIp,
cseFlowMcastQuerySrcVlan VlanIndex,
cseFlowMcastQueryRtrIndex IpAddress,
cseFlowMcastQuerySkipNFlows Integer32,
cseFlowMcastQueryOwner OwnerString,
cseFlowMcastQueryTotalFlows Integer32,
cseFlowMcastQueryRows Integer32,
cseFlowMcastQueryStatus RowStatus,
cseFlowMcastQueryCreateTime TimeStamp,
cseFlowMcastQueryMvrf MplsVpnId,
cseFlowMcastQueryAddrType InetAddressType,
cseFlowMcastQuerySource InetAddress,
cseFlowMcastQueryGroup InetAddress
}
cseFlowMcastQueryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer in the range of 1 to
cseFlowMcastMaxQueries to identify this control query."
::= { cseFlowMcastQueryEntry 1 }
cseFlowMcastQueryMask OBJECT-TYPE
SYNTAX BITS {
source(0),
group(1),
vlan(2),
router(3),
mvrf(4),
sourceip(5),
groupip(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set up the query criterion for
the multicast flows of interest. If any one of the
defined BITs is set, then the value of the corresponding
object in the same row instance will be used for the search.
Specifically, if the 'source(0)' BIT is set, then the
cseFlowMcastQuerySrc object will be included in the
search criterion.
If the group(1) BIT is set, then the
cseFlowMcastQueryGrp object will be included in the
search criterion.
If the vlan(2) BIT is set, then the
cseFlowMcastQuerySrcVlan object will be included in the
search criterion.
If the router(3) BIT is set, then the
cseFlowMcastQueryRtrIndex object will be included in the
search criterion.
If the mvrf(4) BIT is set, then the
cseFlowMcastQueryMvrf object will be included in the
search criterion;
If the sourceip(5) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQuerySource
objects will be included in the search criterion.
If the groupip(6) BIT is set, then the
cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup
objects will be included in the search criterion.
If the source(0) or group(1) BIT is set, then the
sourceip(5) or groupip(6) cannot be set, and vice-versa.
If any of the BITs in this variable is cleared, the
corresponding parameter object in the same row is
treated as a wildcard. When the row is instantiated,
the BITs in the variable will be cleared, and none of
query parameter objects in this row will be instantiated.
This will be considered as a wildcard search for flows
on the default Multicast Virtual Private Network (MVPN)
routing/forwarding (MVRF) instance.
i.e. it will return all rows corresponding
to all established multicast flow entries in the default
MVRF, in cseFlowMcastResultTable. The address type of this
wildcard search will be specified be cseFlowMcastQueryAddrType.
It is SNMP managers' responsibility to set certain
bits on in this object instance, if necessary,
and the corresponding flow parameter variables to the
appropriate values in order to setup the desired
query criteria.
The value of this object can not be altered when the
corresponding instance of cseFlowMcastQueryStatus is 'active'."
DEFVAL { { } }
::= { cseFlowMcastQueryEntry 2 }
cseFlowMcastQuerySrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The source address of the IP multicast layer 3 flows.
This object should be instantiated and assigned a
proper IP address whenever the 'source' bit of
cseFlowMcastQueryMask object in the same row is on.
If the 'source' bit is set, and an appropriate IP address
is assigned to this object, then only flows with the
specified source address will be containing in the
result table.
If the 'source' bit in the associated cseFlowMcastQueryMask
is cleared, this object is ignored during the query, and all
flows will be considered regardless of their source IP address.
This object is deprecated and replaced by
cseFlowMcastQueryAddrType and cseFlowMcastQuerySource."
::= { cseFlowMcastQueryEntry 3 }
cseFlowMcastQueryGrp OBJECT-TYPE
SYNTAX McastGroupIp
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The IP multicast group address of the queried flows.
This object should be instantiated and set whenever
the 'group' bit of the associated cseFlowMcastQueryMask object
is on.
If the 'group' bit is set, and a multicast group address is
assigned to the object, only flows with the specified group
address will be contained in the result table.
If the 'group' bit in the associated cseFlowMcastQueryMask
is cleared, this object is ignored during the query, and all
flows will be considered regardless of their group address.
This object is deprecated and replaced by
cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup."
::= { cseFlowMcastQueryEntry 4 }
cseFlowMcastQuerySrcVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source Vlan ID of the IP multicast layer 3 flows.
This object should be instantiated and set whenever
the 'vlan' bit of the associated cseFlowMcastQueryMask object
is on.
If the 'vlan' bit is set, and a Vlan ID is assigned to this
object, only flows belonging to that vlan will be contained
in the result table.
If the 'vlan' bit in the associated cseFlowMcastQueryMask object
is cleared, this object is ignored during the query, and all
flows will be considered regardless of their vlan IDs."
::= { cseFlowMcastQueryEntry 5 }
cseFlowMcastQueryRtrIndex OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the router for which the multicast flows are
available, that is the flows would be replicated
and routed by the specified
router, should the flows did not get switched.
This object should be instantiated and set whenever the 'router'
bit of the asociated cseFlowMcastQueryMask object is on.
If the 'router' bit is set, and a router's IP address
is assigned to this object, then only flows associated with
that router will be contained in the result table.
If the 'router' bit in the cseFlowMcastQueryMask object
is cleared, this object is ignored during the query, and all
flows will be considered regardless of the routers
being switched."
::= { cseFlowMcastQueryEntry 6 }
cseFlowMcastQuerySkipNFlows OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of searched flows to be skipped before storing
any multicast flows in cseFlowMcastResultTable.
This object can be used along with cseFlowMcastQueryTotalFlows
object to skip previously found flows by setting the variable
equal to the number of the associated rows in
cseFlowMcastResultTable, and only query the remaining flows
in the table.
Note that due to the dynamical nature of the L3 flows, the
queried flows may be missed or repeated by setting this object."
DEFVAL { 0 }
::= { cseFlowMcastQueryEntry 7 }
cseFlowMcastQueryOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The manager entity that configured this entry and is therefore
using the resources assigned to it. It is used to model an
administratively assigned name of the owner of a resource.
It is recommended that this object have one or more the following
information: IP address, management station name, network
manager's name, location, or phone number."
::= { cseFlowMcastQueryEntry 8 }
cseFlowMcastQueryTotalFlows OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of flows matching the query criterion."
::= { cseFlowMcastQueryEntry 9 }
cseFlowMcastQueryRows OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicating the status of the query by following values:
-1 - Either the query has not been started or the
agent is still processing this query instance.
It is the default value when the row is instantiated.
0..2147483647 - The search has ended and this is the
number of rows in the cseFlowMcastResultTable,
resulting from this query."
::= { cseFlowMcastQueryEntry 10 }
cseFlowMcastQueryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage rows in this table.
When set to 'active', the query of flows is initiated.
This object can be set to active only after all the
appropriate objects for this query as defined by the
bits in the cseFlowMcastQueryMask object, have also been
instantiated. The completion of the query is indicated
by the value of cseFlowMcastQueryRows as soon as it
becomes greater than or equal to 0.
Once a row becomes active, values within the row cannot be
modified without setting it to 'notInService' first, or just
deleting and re-creating it.
To abort a lengthy on-going query, setting this object to
'notInService', or 'destroy' will terminate a search
if one is in progress, and cause the associated rows in
cseFlowMcastResultTable, if any, to be deleted."
::= { cseFlowMcastQueryEntry 11 }
cseFlowMcastQueryCreateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when this query was last set to active."
::= { cseFlowMcastQueryEntry 12 }
cseFlowMcastQueryMvrf OBJECT-TYPE
SYNTAX MplsVpnId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The human-readable name of the Multicast
Virtual Private Network (MVPN) routing/forwarding
instance (MVRF). When the 'mvrf' bit of
cseFlowMcastQueryMask object in the same row is on,
an appropriate value should be specified and only flows
with the specified MVRF name will be contained in the
result table. If the 'mvrf' bit in the associated
cseFlowMcastQueryMask is cleared, this object is ignored
during the query, and all the flows corresponding to the
default MVRF will be considered."
::= { cseFlowMcastQueryEntry 13 }
cseFlowMcastQueryAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Internet address type for this multicast search
query."
DEFVAL { ipv4 }
::= { cseFlowMcastQueryEntry 14 }
cseFlowMcastQuerySource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source Internet address of the IP multicast layer 3
flows. When the 'sourceip' bit of cseFlowMcastQueryMask
cseFlowMcastQueryMask object in the same row is on,
an appropriate value should be specified and only flows
with the specified source address will be contained in the
result table. If the 'sourceip' bit in the associated
cseFlowMcastQueryMask is cleared, this object is ignored
during the query, and all flows will be considered regardless
of their source address.
The type of this address is determined by the value of the
cseFlowMcastQueryAddrType object.
The default value of this object is all zeros."
DEFVAL { '00000000'H }
::= { cseFlowMcastQueryEntry 15 }
cseFlowMcastQueryGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast group Internet address of the queried flows.
When the 'mvrf' bit of cseFlowMcastQueryMask object
in the same row is on, an appropriate value should be
specified and only flows with the specified group address
will be contained in the result table. If the 'groupip' bit
in the associated cseFlowMcastQueryMask is cleared, this
object is ignored during the query, and all flows will
be considered regardless of their group address.
The type of this address is determined by the value of the
cseFlowMcastQueryAddrType object.
The default value of this object is all zeros."
DEFVAL { '00000000'H }
::= { cseFlowMcastQueryEntry 16 }
-- The multicast flow query result data table
cseFlowMcastResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseFlowMcastResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing current IP multicast flow information
corresponding to all the completed queries set up in
the cseFlowMcastQueryTable, that were initiated on the switch
engine(s). The query result will not become available until
the current search completes."
::= { cseFlow 13 }
cseFlowMcastResultEntry OBJECT-TYPE
SYNTAX CseFlowMcastResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of cseFlowMcastResultTable, containing
information about an IP multicast layer 3 flow that matchs
the search criteria set in the corresponding row of
cseFlowMcastQueryTable. This row instance is indexed by
the query index (cseFlowMcastQueryIndex), the switch engine
entity (entPhysicalIndex), and data entry index
(cseFlowMcastResultIndex). The value of entPhysicalIndex
object is assigned by Entity-MIB, and uniquely identifies
a switching engine on which the IP multicast flow is stored."
INDEX {
cseFlowMcastQueryIndex,
entPhysicalIndex,
cseFlowMcastResultIndex
}
::= { cseFlowMcastResultTable 1 }
CseFlowMcastResultEntry ::= SEQUENCE {
cseFlowMcastResultIndex Integer32,
cseFlowMcastResultGrp McastGroupIp,
cseFlowMcastResultSrc IpAddress,
cseFlowMcastResultSrcVlan VlanIndex,
cseFlowMcastResultRtrIp IpAddress,
cseFlowMcastResultRtrMac MacAddress,
cseFlowMcastResultCreatedTS TimeStamp,
cseFlowMcastResultLastUsedTS TimeStamp,
cseFlowMcastResultPkts Counter64,
cseFlowMcastResultOctets Counter64,
cseFlowMcastResultDstVlans OCTET STRING,
cseFlowMcastResultDstVlans2k OCTET STRING,
cseFlowMcastResultDstVlans3k OCTET STRING,
cseFlowMcastResultDstVlans4k OCTET STRING,
cseFlowMcastResultMvrf MplsVpnId,
cseFlowMcastResultAddrType InetAddressType,
cseFlowMcastResultGroup InetAddress,
cseFlowMcastResultSource InetAddress,
cseFlowMcastResultFlowType INTEGER,
cseFlowMcastResultHFlag1k2k OCTET STRING,
cseFlowMcastResultHFlag3k4k OCTET STRING
}
cseFlowMcastResultIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A positive integer which uniquely identify a result entry
on a specific switching engine matching a particular query."
::= { cseFlowMcastResultEntry 1 }
cseFlowMcastResultGrp OBJECT-TYPE
SYNTAX McastGroupIp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The multicast group IP address of the multicast layer 3 flow.
This object is deprecated and replaced by
cseFlowMcastResultAddrType and cseFlowMcastResultGroup."
::= { cseFlowMcastResultEntry 2 }
cseFlowMcastResultSrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The source address of the multicast layer 3 flow.
This object is deprecated and replaced by
cseFlowMcastResultAddrType and cseFlowMcastResultSource."
::= { cseFlowMcastResultEntry 3 }
cseFlowMcastResultSrcVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source Vlan ID of the IP multicast layer 3 flow."
::= { cseFlowMcastResultEntry 4 }
cseFlowMcastResultRtrIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface IP address of the router this multicast flow
is switching for. Since IP multicast flows can only be
established for a router's trunk ports, it is the primary
IP address of the router's trunk link that connects to the
switch."
::= { cseFlowMcastResultEntry 5 }
cseFlowMcastResultRtrMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default MAC address of the router the multicast flow is
switching for. Different multicast flows switching different
ports of the same router will have the identical value of this
object."
::= { cseFlowMcastResultEntry 6 }
cseFlowMcastResultCreatedTS OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when the IP multicast flow was created."
::= { cseFlowMcastResultEntry 7 }
cseFlowMcastResultLastUsedTS OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when this IP multicast flow was last used."
::= { cseFlowMcastResultEntry 8 }
cseFlowMcastResultPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast traffic packets forwarded
for this flow (replicated packets are not counted)."
::= { cseFlowMcastResultEntry 9 }
cseFlowMcastResultOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast traffic octets forwarded
for this flow (replicated packets are not counted)."
::= { cseFlowMcastResultEntry 10 }
cseFlowMcastResultDstVlans OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN.
Each octet within the value of this object specifies a
set of eight VLANs, e.g. the first octet corresponding to
VLANs with VlanIndex values of 0 through 7, the second
octet to VLANs 8 through 15, etc. Within each octet,
the most significant bit represents the lowest numbered
VLAN, and the least significant bit represents the highest
numbered VLAN, thus each vlan is represented by a single bit
within the octet. The bits in this object will be set
to '1' if the corresponding Vlans are in the out-going
interface (vlan) list of the IP multicast flow described
by this row instance."
::= { cseFlowMcastResultEntry 11 }
cseFlowMcastResultDstVlans2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN,
with VlanIndex values of 1024 through 2047,with
each octet within the value of this object specifies a
set of eight VLANs, e.g. the first octet corresponding to
VLANs with VlanIndex values of 1024 through 1031, the second
octet to VLANs 1032 through 1039 etc. Within each octet,
the most significant bit represents the lowest numbered
VLAN, and the least significant bit represents the highest
numbered VLAN, thus each vlan is represented by a single bit
within the octet. The bits in this object will be set
to '1' if the corresponding Vlans are in the out-going
interface (vlan) list of the IP multicast flow described
by this row instance."
::= { cseFlowMcastResultEntry 12 }
cseFlowMcastResultDstVlans3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN.
With VlanIndex values of 2048 through 3071 with
each octet within the value of this object specifies a
set of eight VLANs, e.g. the first octet corresponding to
VLANs with VlanIndex values of 2048 through 2055, the second
octet to VLANs 2056 through 2063 etc. Within each octet,
the most significant bit represents the lowest numbered
VLAN, and the least significant bit represents the highest
numbered VLAN, thus each vlan is represented by a single bit
within the octet. The bits in this object will be set
to '1' if the corresponding Vlans are in the out-going
interface (vlan) list of the IP multicast flow described
by this row instance."
::= { cseFlowMcastResultEntry 13 }
cseFlowMcastResultDstVlans4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN.
With VlanIndex values of 3072 through 4095, with
each octet within the value of this object specifies a
set of eight VLANs, e.g. the first octet corresponding to
VLANs with VlanIndex values of 3072 through 3079 the second
octet to VLANs 3080 through 3087 etc. Within each octet,
the most significant bit represents the lowest numbered
VLAN, and the least significant bit represents the highest
numbered VLAN, thus each vlan is represented by a single bit
within the octet. The bits in this object will be set
to '1' if the corresponding Vlans are in the out-going
interface (vlan) list of the IP multicast flow described
by this row instance."
::= { cseFlowMcastResultEntry 14 }
cseFlowMcastResultMvrf OBJECT-TYPE
SYNTAX MplsVpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MVRF to which this flow belongs to."
::= { cseFlowMcastResultEntry 15 }
cseFlowMcastResultAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Internet address type of cseFlowMcastResultGroup
and cseFlowMcastResultSource."
::= { cseFlowMcastResultEntry 16 }
cseFlowMcastResultGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast group IP address of the multicast layer
3 flow."
::= { cseFlowMcastResultEntry 17 }
cseFlowMcastResultSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the multicast layer 3 flow."
::= { cseFlowMcastResultEntry 18 }
cseFlowMcastResultFlowType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
rpfMfd(2),
partialSC(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of multicast layer 3 flow.
other - Multicast flow type is none of the followoing.
rpfMfd - This flow is a RPF MFD flow.
partial - This flow is a partial shortcut flow."
::= { cseFlowMcastResultEntry 19 }
cseFlowMcastResultHFlag1k2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per out-going
interface (VLAN) with VlanIndex values of 0 through 2047.
Each octet within the value of this object specifies
a set of eight VLANs, e.g. the first octet
corresponding to VLANs with VlanIndex values of
0 through 7, the second octet to VLANs 8 through 15,
etc. Within each octet, the most significant bit
represents the lowest numbered VLAN, and the least
significant bit represents the highest numbered VLAN,
thus each vlan is represented by a single bit within the
octet.
The bits in this object will be set to '1' if the
multicast layer 3 flow described by this row instance
is hardware switched on the corresponding VLAN.
If the length of this string is less than 256 octets,
any 'missing' octets are assumed to contain the value
of zero."
::= { cseFlowMcastResultEntry 20 }
cseFlowMcastResultHFlag3k4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per out-going
interface (VLAN) with VlanIndex values of 2048 through
4095. Each octet within the value of this object
specifies a set of eight VLANs, e.g. the first octet
corresponding to VLANs with VlanIndex values of 2048
through 2055, the second octet to VLANs 2056 through
2063 etc. Within each octet, the most significant
bit represents the lowest numbered VLAN, and the least
significant bit represents the highest numbered VLAN,
thus each vlan is represented by a single bit within
the octet.
The bits in this object will be set to '1' if the
multicast layer 3 flow described by this row instance
is hardware switched on the corresponding VLAN.
If the length of this string is less than 256 octets,
any 'missing' octets are assumed to contain the value
of zero."
::= { cseFlowMcastResultEntry 21 }
-- Multicast MLS-SE global configuration
cseFlowMcastSwitchStatus OBJECT-TYPE
SYNTAX ControlStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current status of the global IP multicast flow switching
capability. When enabled, the switch engine will be able to
install multicast flow entries in its L3 forwarding table,
and perform hardware assisted switching for the flows."
::= { cseFlow 14 }
-- Now that our hardware can L3 switch IPX traffic
cseFlowIPXEstablishedAgingTime OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative aging time for established IPX flows. The
default value for this object is implementation specific.
The corresponding operational object is
cseFlowOperIPXAgingTime."
::= { cseFlow 15 }
cseStaticIpxExtRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseStaticIpxExtRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of external routers which are enabled for
Layer 3 IPX switching by the switching engine.
This table may contain routers
that have not yet been discovered by the device."
::= { cseFlow 16 }
cseStaticIpxExtRouterEntry OBJECT-TYPE
SYNTAX CseStaticIpxExtRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cseStaticIpxExtRouterTable for
enabling an external router to be installed in the
switch's router table. The entry is created and deleted
by using cseStaticIpxRouterStatus."
INDEX { cseRouterIndex }
::= { cseStaticIpxExtRouterTable 1 }
CseStaticIpxExtRouterEntry ::= SEQUENCE {
cseStaticIpxRouterName DisplayString,
cseStaticIpxRouterOwner OwnerString,
cseStaticIpxRouterStatus RowStatus
}
cseStaticIpxRouterName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DNS name (if available) of the external router."
::= { cseStaticIpxExtRouterEntry 1 }
cseStaticIpxRouterOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"String indicating the owner who created the static entry."
::= { cseStaticIpxExtRouterEntry 2 }
cseStaticIpxRouterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage creation and deletion of rows in this table.
Once a row becomes active, values within that row cannot be
modified except by deleting and creating the row."
::= { cseStaticIpxExtRouterEntry 3 }
cseFlowOperEstablishedAgingTime OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational aging time for IP established flows."
::= { cseFlow 17 }
cseFlowOperFastAgingTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational fast aging time for the established flow
entries, that have less number of packets than the value set
in the cseFlowOperFastAgePktThreshold,switched within this
time."
::= { cseFlow 18 }
cseFlowOperFastAgePktThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational packet threshold for the
cseFlowOperFastAgingTime."
::= { cseFlow 19 }
cseFlowOperIPXAgingTime OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational aging time for established IPX flows."
::= { cseFlow 20 }
-- The bridged flow statistics control table
cseBridgedFlowStatsCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseBridgedFlowStatsCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table controls the reporting of intra-vlan statistics
for bridged flow per vlan. When a vlan is created in
a device supporting this table, a corresponding entry
of this table will be added."
::= { cseFlow 21 }
cseBridgedFlowStatsCtrlEntry OBJECT-TYPE
SYNTAX CseBridgedFlowStatsCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance contains the configuration to enable
or disable the reporting of intra-vlan statistics for
bridged flow per vlan."
INDEX { cseBridgedFlowVlan }
::= { cseBridgedFlowStatsCtrlTable 1 }
CseBridgedFlowStatsCtrlEntry ::= SEQUENCE {
cseBridgedFlowVlan VlanIndex,
cseFlowBridgedFlowStatsEnable TruthValue
}
cseBridgedFlowVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Vlan number on which the reporting of
intra-vlan bridged flow statistics is configured."
::= { cseBridgedFlowStatsCtrlEntry 1 }
cseFlowBridgedFlowStatsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether intra-vlan bridged flow statistics is
enabled. If this object is set to 'true', intra-vlan
bridged flow statistics is reported in cseFlowDataTable
when a corresponding query is set up in cseFlowQueryTable.
If this object is set to 'false', intra-vlan bridged flow
statistics is not reported. The default is false."
DEFVAL { false }
::= { cseBridgedFlowStatsCtrlEntry 2 }
cseFlowIPFlowMask OBJECT-TYPE
SYNTAX INTEGER {
dstOnly(1),
srcDst(2),
fullFlow(3),
srcOnly(4),
intDstSrc(5),
intFull(6),
null(7),
intDstOnly(8),
intSrcOnly(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the flow mask for IP flows.
If dstOnly(1) is used, it enables flows based on Layer 3
destination addresses only.
If srcDst(2) is used, it enables flows based on both Layer 3
source and destination addresses only.
If fullFlow(3) is used, it enables flows based on Layer 4 port
numbers in addition to source and destination addresses.
If srcOnly(4) is used, it enables flows based on Layer 3
source addresses only.
If intDstSrc(5) is used, it enables flows based on source
interface in addition to source and destination addresses.
If intFull(6) is used, it enables flows based on source
interface in addition to Layer 4 port numbers, source and
destination addresses.
If null(7) is used, no flow will be enabled.
If intDstOnly(8) is used, it enables flows based on source
interface in addition to the destination addresses.
If intSrcOnly(9) is used, it enables flows based on source
interface in addition to the source addresses."
::= { cseFlow 22 }
cseFlowIPXFlowMask OBJECT-TYPE
SYNTAX INTEGER {
dstOnly(1),
srcDst(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the flow mask for IPX flows.
If dstOnly(1) is used, it enables flows based on Layer 3
destination addresses only.
If srcDst(2) is used, it enables flows based on both Layer 3
source and destination addresses only."
::= { cseFlow 23 }
cseFlowLongAgingTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative long aging time for the established
flow entries. Setting to value of 0 turns off long aging."
::= { cseFlow 24 }
-- The protocol exclude table
cseFlowExcludeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseFlowExcludeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table controls the flow creation based on protocol
and port number. If a packet matches the protocol and
port number specified in this table entries, a flow
entry will not be established."
::= { cseFlow 25 }
cseFlowExcludeEntry OBJECT-TYPE
SYNTAX CseFlowExcludeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance contains the configuration to enable or
disable the establishment of flow entry for matching
traffic."
INDEX { cseFlowExcludePort }
::= { cseFlowExcludeTable 1 }
CseFlowExcludeEntry ::= SEQUENCE {
cseFlowExcludePort CiscoPort,
cseFlowExcludeProtocol INTEGER,
cseFlowExcludeStatus RowStatus
}
cseFlowExcludePort OBJECT-TYPE
SYNTAX CiscoPort
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the TCP or UDP port number that matching
traffic will be excluded from flow establishment.
The value of 0 is not allowed."
::= { cseFlowExcludeEntry 1 }
cseFlowExcludeProtocol OBJECT-TYPE
SYNTAX INTEGER {
udp(1),
tcp(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the protocol that matching traffic will be
excluded from flow establishment."
::= { cseFlowExcludeEntry 2 }
cseFlowExcludeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. New rows are created
using 'createAndGo' and deleted using 'destroy'.
Once 'active' this object may be set to only 'destroy'.
cseFlowExcludeProtocol may be modified at any time (even
while the row is active)."
::= { cseFlowExcludeEntry 3 }
-- The flow statistics table
cseFlowStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing flow statistics information on each switching
engine."
::= { cseFlow 26 }
cseFlowStatsEntry OBJECT-TYPE
SYNTAX CseFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of cseFlowStatsTable, containing flow
statistics maintained by a switching engine entity
(identified by entPhysicalIndex). Each switching engine
managed by this MIB module has an entry in this table."
INDEX { entPhysicalIndex }
::= { cseFlowStatsTable 1 }
CseFlowStatsEntry ::= SEQUENCE {
cseFlowTotalFlows Gauge32,
cseFlowTotalIpv4Flows Gauge32
}
cseFlowTotalFlows OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of flow entries installed in
this switching engine."
::= { cseFlowStatsEntry 1 }
cseFlowTotalIpv4Flows OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of IPv4 flow entries in
this switching engine."
::= { cseFlowStatsEntry 2 }
-- Optional NetFlow Lan Switching group
cseNetflowLSExportStatus OBJECT-TYPE
SYNTAX ControlStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the Netflow LAN Switching data export feature."
::= { cseNetflowLS 1 }
cseNetflowLSExportHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Network(IP) address in dotted decimal format or the DNS hostname
of the host to which Netflow LAN switching statistics are
exported.
This object is deprecated and replaced by cndeCollectorAddress
in CISCO-NDE-MIB."
::= { cseNetflowLS 2 }
cseNetflowLSExportTransportNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The transport(UDP) port number to be used for the Netflow LAN
switching statistics being exported.
This object is deprecated and replaced by cndeCollectorPort
in CISCO-NDE-MIB."
::= { cseNetflowLS 3 }
cseNetflowLSExportDataSource OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source network address used as a filter for selecting
the flows to which the netflow LAN switching data export
feature is applied."
::= { cseNetflowLS 4 }
cseNetflowLSExportDataSourceMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to the corresponding instance of
cseNetflowExportDataSource."
::= { cseNetflowLS 5 }
cseNetflowLSExportDataDest OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination network address used as a filter for
selecting the flows to which the netflow LAN switching
data export feature is applied."
::= { cseNetflowLS 6 }
cseNetflowLSExportDataDestMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to its corresponding instance
of cseNetflowExportDataDest."
::= { cseNetflowLS 7 }
cseNetflowLSExportDataProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol used as a filter for selecting the
flows to which the netflow LAN switching data export feature
is applied."
REFERENCE "The protocol value is defined in the RFC 1700."
::= { cseNetflowLS 8 }
cseNetflowLSExportDataFilterSelection OBJECT-TYPE
SYNTAX INTEGER {
included(1),
excluded(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The filter set can be chosen either included(1) or
excluded(2) mutually exclusive. If this object is set to
included(1) - exports the flows that match
cseNetflowLSExportDataSource,
cseNetflowLSExportDataSourceMask,
cseNetflowLSExportDataDest,
cseNetflowLSExportDataDestMask and
cseNetflowLSExportDataProtocol.
excluded(2) - exports the flows that don't match
cseNetflowLSExportDataSource,
cseNetflowLSExportDataSourceMask,
cseNetflowLSExportDataDest,
cseNetflowLSExportDataDestMask and
cseNetflowLSExportDataProtocol."
::= { cseNetflowLS 9 }
cseNetflowLSExportNDEVersionNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The netflow data export version number which is
supported by the device.
The typical value of this object can be 1, 7 or 8."
::= { cseNetflowLS 10 }
cseNetflowLSFilterSupport OBJECT-TYPE
SYNTAX INTEGER {
single(1),
multiple(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this device supports single filter or
multiple filters.
single - use objects in cseNDESingleFilterGroupRev1 to
configure NDE filtering paramaters.
multiple - use objects in cseNDEMultipleFiltersGroup to
configure NDE filtering paramaters."
::= { cseNetflowLS 11 }
cseNetflowLSFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseNetflowLSFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing Netflow Data Export filtering
configuration."
::= { cseNetflowLS 12 }
cseNetflowLSFilterEntry OBJECT-TYPE
SYNTAX CseNetflowLSFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptutal row in the cseNetflowLSFilterTable,
representing a NDE filter configuration."
INDEX { cseNetflowLSFilterIndex }
::= { cseNetflowLSFilterTable 1 }
CseNetflowLSFilterEntry ::= SEQUENCE {
cseNetflowLSFilterIndex Unsigned32,
cseNetflowLSFilterDataSource FlowAddressComponent,
cseNetflowLSFilterDataSourceMask FlowAddressComponent,
cseNetflowLSFilterDataDest FlowAddressComponent,
cseNetflowLSFilterDataDestMask FlowAddressComponent,
cseNetflowLSFilterDataProtocol Integer32,
cseNetflowLSFilterSelection INTEGER,
cseNetflowLSFilterStatus RowStatus
}
cseNetflowLSFilterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which uniquely identifies the filter"
::= { cseNetflowLSFilterEntry 1 }
cseNetflowLSFilterDataSource OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source network address used as a filter for selecting
the flows to which the netflow LAN switching data export
feature is applied. If cseNetflowLSNDEFilterDataSource
contains all zeros, then the
cseNetflowLSNDEFilterDataSource object will not be
included in the filtering criterion."
DEFVAL { '000000000000'H }
::= { cseNetflowLSFilterEntry 2 }
cseNetflowLSFilterDataSourceMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask to be applied to the corresponding instance of
cseNetflowExportDataSource.
If cseNetflowLSFilterDataSourceMask contains all zeros,
then the cseNetflowLSFilterDataSourceMask object will
not be included in the filtering criterion."
DEFVAL { '000000000000'H }
::= { cseNetflowLSFilterEntry 3 }
cseNetflowLSFilterDataDest OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination network address used as a filter for
selecting the flows to which the netflow LAN switching data
export feature is applied.
If cseNetflowLSFilterDataDest contains all zeros, then the
cseNetflowLSFilterDataDest object will not be included in
the filtering criterion."
DEFVAL { '000000000000'H }
::= { cseNetflowLSFilterEntry 4 }
cseNetflowLSFilterDataDestMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask to be applied to its corresponding instance
of cseNetflowExportDataDest.
If cseNetflowLSFilterDataDestMask contains all zeros,
then the cseNetflowLSFilterDataDestMask object will not be
included in the filtering criterion."
DEFVAL { '000000000000'H }
::= { cseNetflowLSFilterEntry 5 }
cseNetflowLSFilterDataProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol used as a filter for selecting the
flows to which the netflow LAN switching data export
feature is applied.
The default value is set to 0, to specify that no value
has been set.
If cseNetflowLSFilterDataProtocol is set to 0, then the
cseNetflowLSFilterDataProtocol object will not be included in
the filtering criterion."
DEFVAL { 0 }
::= { cseNetflowLSFilterEntry 6 }
cseNetflowLSFilterSelection OBJECT-TYPE
SYNTAX INTEGER {
included(1),
excluded(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The filter set can be chosen either included(1) or
excluded(2).
If this object is set to
included(1) - exports the flows that match
cseNetflowLSFilterDataSource,
cseNetflowLSFilterDataSourceMask,
cseNetflowLSFilterDataDest,
cseNetflowLSFilterDataDestMask and
cseNetflowLSFilterDataProtocol.
excluded(2) - exports the flows that don't match
cseNetflowLSFilterDataSource,
cseNetflowLSFilterDataSourceMask,
cseNetflowLSFilterDataDest,
cseNetflowLSFilterDataDestMask and
cseNetflowLSFilterDataProtocol."
::= { cseNetflowLSFilterEntry 7 }
cseNetflowLSFilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage the rows in this table.
Once a row becomes active, values within that row cannot be
modified except by deleting and creating the row."
::= { cseNetflowLSFilterEntry 8 }
cseNetFlowIfIndexEnable OBJECT-TYPE
SYNTAX BITS {
destIfIndex(0),
srcIfIndex(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether ifIndex reporting in NDE (Netflow
Data Export) is enabled.
if bit destIfIndex(0) is on, destination ifIndex reporting
in NDE is enabled.
if bit srcIfIndex(1) is on, source ifIndex reporting in NDE
is enabled."
::= { cseNetflowLS 13 }
cseNetflowASInfoExportCtrl OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
originate(2),
peer(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether export of Autonomous System(AS) number
information, in the NDE records, is enabled.
disable - Disables the export of AS number information.
originate - Enables the export of origination AS numbers of
source and destination IP addresses.
peer - Enables the export of peer AS numbers of
source and destination IP addresses."
::= { cseNetflowLS 14 }
cseNetflowPerVlanIfGlobalEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether 'creation of Netflow entries per
VLAN interface' feature is enabled at the device level.
If this object is set to 'false',
netflow entries will be created for all VLANs.
If this object is set to 'true', creation of netflow
entries can be controlled by cseNetflowPerVlanIfCtrlTable."
::= { cseNetflowLS 15 }
cseNetflowPerVlanIfCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseNetflowPerVlanIfCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control netflow entry creation for each VLAN.
When a VLAN is created, a corresponding entry is added
to this table."
::= { cseNetflowLS 16 }
cseNetflowPerVlanIfCtrlEntry OBJECT-TYPE
SYNTAX CseNetflowPerVlanIfCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the configuration to enable or
disable netflow entry creation for each VLAN."
INDEX { cseNetflowPerVlanIfCtrlVlan }
::= { cseNetflowPerVlanIfCtrlTable 1 }
CseNetflowPerVlanIfCtrlEntry ::= SEQUENCE {
cseNetflowPerVlanIfCtrlVlan VlanIndex,
cseNetflowPerVlanIfEnable TruthValue
}
cseNetflowPerVlanIfCtrlVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN number on which creation of netflow
entries is configured."
::= { cseNetflowPerVlanIfCtrlEntry 1 }
cseNetflowPerVlanIfEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether creation of netflow entries is enabled
on this VLAN.
If this object is set to 'true', the system will create
netflow entries for this VLAN.
If this object is set to 'false', the system will not create
any netflow entries for this VLAN.
When the value of cseNetflowPerVlanIfGlobalEnable is 'false',
this object will not take effect."
::= { cseNetflowPerVlanIfCtrlEntry 2 }
-- L3 switching statistics
cseL3StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseL3StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing L3 statistics information on each switching
engine."
::= { cseL3Objects 1 }
cseL3StatsEntry OBJECT-TYPE
SYNTAX CseL3StatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of cseL3StatsTable, containing L3 statistics
maintained by a switching engine entity (identified by
entPhysicalIndex). Each switching engine managed by this
MIB module has an entry in this table."
INDEX { entPhysicalIndex }
::= { cseL3StatsTable 1 }
CseL3StatsEntry ::= SEQUENCE {
cseL3SwitchedTotalPkts Counter32,
cseL3SwitchedTotalOctets Counter64,
cseL3CandidateFlowHits Counter32,
cseL3EstablishedFlowHits Counter32,
cseL3ActiveFlows Gauge32,
cseL3FlowLearnFailures Counter32,
cseL3IntFlowInvalids Counter32,
cseL3ExtFlowInvalids Counter32,
cseL3SwitchedPktsPerSec Counter32
}
cseL3SwitchedTotalPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets switched at Layer 3 by this switching
engine."
::= { cseL3StatsEntry 1 }
cseL3SwitchedTotalOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets in the total packets switched at Layer 3 by this
switching engine."
::= { cseL3StatsEntry 2 }
cseL3CandidateFlowHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of L3 Cache hits for the candidate flow entries in this
switching engine."
::= { cseL3StatsEntry 3 }
cseL3EstablishedFlowHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of L3 Cache hits for established flow entries in this
switching engine."
::= { cseL3StatsEntry 4 }
cseL3ActiveFlows OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active flows in the Layer 3 flow table of this switching
engine."
::= { cseL3StatsEntry 5 }
cseL3FlowLearnFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of flows that failed to be learned because the Layer 3
flow table in this switching engine was full."
::= { cseL3StatsEntry 6 }
cseL3IntFlowInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of flow invalidation events received by this switching
engine from the internal router(s)."
::= { cseL3StatsEntry 7 }
cseL3ExtFlowInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of flow invalidation events received by this switching
engine from external routers."
::= { cseL3StatsEntry 8 }
cseL3SwitchedPktsPerSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets switched per second at Layer 3 by this
switching engine."
::= { cseL3StatsEntry 9 }
-- Per-VLAN L3 statistics
cseL3VlanStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseL3VlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per-VLAN, Layer 3 statistics information per
switching engine."
::= { cseL3Objects 2 }
cseL3VlanStatsEntry OBJECT-TYPE
SYNTAX CseL3VlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of cseL3VlanStatsTable, containing per-VLAN
Layer 3 statistics maintained by a switching engine (identified
by entPhysicalIndex). An entry exists for each known VLAN for
each switching engine."
INDEX {
entPhysicalIndex,
cseL3VlanIndex
}
::= { cseL3VlanStatsTable 1 }
CseL3VlanStatsEntry ::= SEQUENCE {
cseL3VlanIndex VlanIndex,
cseL3VlanInPkts Counter64,
cseL3VlanInOctets Counter64,
cseL3VlanOutPkts Counter64,
cseL3VlanOutOctets Counter64,
cseL3VlanInUnicastPkts Counter64,
cseL3VlanInUnicastOctets Counter64,
cseL3VlanOutUnicastPkts Counter64,
cseL3VlanOutUnicastOctets Counter64
}
cseL3VlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan number for which the statistics are maintained by this
entry."
::= { cseL3VlanStatsEntry 1 }
cseL3VlanInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets Layer 3 forwarded from this Vlan to some
other VLAN by this switching engine."
::= { cseL3VlanStatsEntry 2 }
cseL3VlanInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets in packets Layer-3 forwarded from this Vlan
to some other VLAN by this switching engine."
::= { cseL3VlanStatsEntry 3 }
cseL3VlanOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets Layer-3 forwarded to this Vlan by this
switching engine."
::= { cseL3VlanStatsEntry 4 }
cseL3VlanOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets in packets Layer-3 forwarded to this Vlan
by this switching engine."
::= { cseL3VlanStatsEntry 5 }
cseL3VlanInUnicastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets Layer 3 forwarded from this Vlan
to some other VLAN by this switching engine."
::= { cseL3VlanStatsEntry 6 }
cseL3VlanInUnicastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets in unicast packets Layer-3 forwarded from
this Vlan to some other VLAN by this switching engine."
::= { cseL3VlanStatsEntry 7 }
cseL3VlanOutUnicastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets Layer 3 forwarded to this
Vlan by this switching engine."
::= { cseL3VlanStatsEntry 8 }
cseL3VlanOutUnicastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets in unicast packets Layer-3 forwarded
to this Vlan by this switching engine."
::= { cseL3VlanStatsEntry 9 }
-- Switch Engine based layer 3 flow statistics; it is protocol
-- independent, i.e. IP and IPX statistics are not separated
-- This group is an augmentation of cseL3StatsTable
cseStatsFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseStatsFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of flow statistics per switch engine that is
not covered in cseL3StatsTable."
::= { cseL3Objects 3 }
cseStatsFlowEntry OBJECT-TYPE
SYNTAX CseStatsFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row about slot based L3 flow statistics."
AUGMENTS { cseL3StatsEntry }
::= { cseStatsFlowTable 1 }
CseStatsFlowEntry ::= SEQUENCE {
cseStatsFlowAged Counter32,
cseStatsFlowPurged Counter32,
cseStatsFlowParityFail Counter32
}
cseStatsFlowAged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of layer 3 flows aged out by hardware. Management
applications can control flow aging by setting the value of
cseFlowEstablishedAgingTime object."
::= { cseStatsFlowEntry 1 }
cseStatsFlowPurged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of layer 3 flows purged by software; it may happen
because a router invalidates certain flows, or a router for which
flows are being switched has been excluded from cseRouterTable, or
access-list has changed, or certain features have been enabled
that would purge certain flows (TCP interception, Web cache are
examples of such features)."
::= { cseStatsFlowEntry 2 }
cseStatsFlowParityFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of memory parity errors on accessing flows in
the cache pools. It may be due to the internal RAM reading
error, not necessarily the corrupted flow data."
::= { cseStatsFlowEntry 3 }
-- Utilization level of flow cache pool per Switch Engine
-- Flows are combined for IP and IPX
cseCacheUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseCacheUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of utilization levels in percentage of cache
capacity per switch engine. Each row instance is the
current flow utilization information in the cache pool
of the corresponding switching engine."
::= { cseL3Objects 4 }
cseCacheUtilEntry OBJECT-TYPE
SYNTAX CseCacheUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance represents layer 3 flow utilization of
a particular cache pool on a switching engine."
INDEX { entPhysicalIndex }
::= { cseCacheUtilTable 1 }
CseCacheUtilEntry ::= SEQUENCE {
cseCacheUtilization Gauge32,
cseCacheEntriesCreated Unsigned32,
cseCacheEntriesFailed Unsigned32
}
cseCacheUtilization OBJECT-TYPE
SYNTAX Gauge32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flow utilization level in percentage in this switching engine.
It includes the flow entries for both unicast and multicast.
The lighter the utilization level, the less risk of dropping
flows, i.e. the higher success-rate of flow insertion."
::= { cseCacheUtilEntry 1 }
cseCacheEntriesCreated OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of flow entries
successfully created in this switching engine."
::= { cseCacheUtilEntry 2 }
cseCacheEntriesFailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of flow entries
which were failed to be created in this switching engine."
::= { cseCacheUtilEntry 3 }
-- L3 error counters table.
cseErrorStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP and IPX error counters per switch engine."
::= { cseL3Objects 5 }
cseErrorStatsEntry OBJECT-TYPE
SYNTAX CseErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance represents layer-3 IP and IPX error counters
on a switching engine."
INDEX { entPhysicalIndex }
::= { cseErrorStatsTable 1 }
CseErrorStatsEntry ::= SEQUENCE {
cseIpPlenErrors Counter64,
cseIpTooShortErrors Counter64,
cseIpCheckSumErrors Counter64,
cseIpxPlenErrors Counter64,
cseIpxTooShortErrors Counter64
}
cseIpPlenErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IP length against physical length
errors."
::= { cseErrorStatsEntry 1 }
cseIpTooShortErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IP length too short errors."
::= { cseErrorStatsEntry 2 }
cseIpCheckSumErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IP checksum errors."
::= { cseErrorStatsEntry 3 }
cseIpxPlenErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IPX length against physical length
errors."
::= { cseErrorStatsEntry 4 }
cseIpxTooShortErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IPX length too short errors."
::= { cseErrorStatsEntry 5 }
-- L3 error counters table.
cseErrorStatsLCTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseErrorStatsLCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP and IPX error counters per switch engine."
::= { cseL3Objects 6 }
cseErrorStatsLCEntry OBJECT-TYPE
SYNTAX CseErrorStatsLCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance represents layer-3 IP and IPX error counters
on a switching engine."
INDEX { entPhysicalIndex }
::= { cseErrorStatsLCTable 1 }
CseErrorStatsLCEntry ::= SEQUENCE {
cseLCIpPlenErrors Counter32,
cseLCIpTooShortErrors Counter32,
cseLCIpCheckSumErrors Counter32,
cseLCIpxPlenErrors Counter32,
cseLCIpxTooShortErrors Counter32
}
cseLCIpPlenErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IP length against physical length
errors."
::= { cseErrorStatsLCEntry 1 }
cseLCIpTooShortErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IP length too short errors."
::= { cseErrorStatsLCEntry 2 }
cseLCIpCheckSumErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IP checksum errors."
::= { cseErrorStatsLCEntry 3 }
cseLCIpxPlenErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IPX length against physical length
errors."
::= { cseErrorStatsLCEntry 4 }
cseLCIpxTooShortErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of IPX length too short errors."
::= { cseErrorStatsLCEntry 5 }
-- Packets Switched Per Second
cseL3SwitchedAggrPktsPerSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets switched per second at Layer 3 by the
entire system."
::= { cseL3Objects 7 }
-- Protocol Filter capability
cseProtocolFilterEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if protocol filtering is enabled in the device."
::= { cseProtocolFilter 1 }
cseProtocolFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseProtocolFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the protocol filtering configuration and status
information on ports."
::= { cseProtocolFilter 2 }
cseProtocolFilterPortEntry OBJECT-TYPE
SYNTAX CseProtocolFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cseProtocolFilterPortTable,
representing a Protocol filter configuration
status information for a particular
port (identified by ifIndex) and protocol type."
INDEX {
ifIndex,
cseProtocolFilterPortProtocol
}
::= { cseProtocolFilterPortTable 1 }
CseProtocolFilterPortEntry ::= SEQUENCE {
cseProtocolFilterPortProtocol INTEGER,
cseProtocolFilterPortAdminStatus INTEGER,
cseProtocolFilterPortOperStatus INTEGER
}
cseProtocolFilterPortProtocol OBJECT-TYPE
SYNTAX INTEGER {
ip(1),
ipx(2),
grpProtocols(3) -- Appletalk/Decnet/Vines
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol (group) to filter, used here as the secondary
index."
::= { cseProtocolFilterPortEntry 1 }
cseProtocolFilterPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of the administrative status of the protocol
filtering on this interface.
- on(1) indicates that the interface will send and receive the
traffic for protocol specified in
cseProtocolFilterPortProtocol.
- off(2) indicates that the interface will not receive
traffic for this protocol, or if this feature is not
supported.
- auto(3) indicates that the corresponding
cseProtocolFilterPortOperStatus will transit to 'on' after
receiving one packet of this protocol type."
::= { cseProtocolFilterPortEntry 2 }
cseProtocolFilterPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
notSupported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the operational status of filtering for
this protocol on this interface.
- on(1) indicates that the interface will send and receive the
protocol traffic.
- off(2) indicates that the interface will drop all traffic
belonging to this protocol.
- notSupported(3) indicates the hardware does not support
protocol filtering."
::= { cseProtocolFilterPortEntry 3 }
-- This MIB group/table is designed for control of purging flow caches
-- The caches are distributed in the switching engines across the system
cseUcastCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseUcastCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A control table used to purge certain types of IP/IPX layer 3
unicast flows stored in the cache pool."
::= { cseUcastCache 1 }
cseUcastCacheEntry OBJECT-TYPE
SYNTAX CseUcastCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cseUcastCacheTable, used to set up
flow clearing criteria. The actual purging is started by setting
the value of cseUcastCacheStatus to 'active'. Once a row becomes
active, values within the row cannot be modified, except by
setting it to 'notInService' first or deleting and re-creating
the row."
INDEX { cseUcastCacheIndex }
::= { cseUcastCacheTable 1 }
CseUcastCacheEntry ::= SEQUENCE {
cseUcastCacheIndex Unsigned32,
cseUcastCacheFlowType INTEGER,
cseUcastCacheTransport INTEGER,
cseUcastCacheDest FlowAddressComponent,
cseUcastCacheDestMask FlowAddressComponent,
cseUcastCacheSource FlowAddressComponent,
cseUcastCacheSrcMask FlowAddressComponent,
cseUcastCacheRtrIp IpAddress,
cseUcastCacheOwner OwnerString,
cseUcastCacheResult INTEGER,
cseUcastCacheStatus RowStatus
}
cseUcastCacheIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which uniquely identifies the flow
purge contained in this row instance."
::= { cseUcastCacheEntry 1 }
cseUcastCacheFlowType OBJECT-TYPE
SYNTAX INTEGER {
any(1),
dstOnly(2),
srcOrDst(3),
srcAndDst(4),
fullFlow(5),
ipxDstOnly(6),
ipxSrcAndDst(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting each value causes the appropriate action:
'dstOnly' - causes purge of flows in the cache whose absolute
destination IP addresses match the address part of the value set
in the cseUcastCacheDest object. If cseUcastCacheDestMask is also
specified at the same time, it will be applied to the address part
of cseUcastCacheDest.
'srcOrDst' - causes purge of flows in the cache whose either
absolute source or destination IP addresses match the address
parts of the values set in cseUcastCacheSource or
cseUcastCacheDest.
If cseUcastCacheDestMask/cseUcastCacheSrcMask also specified,
they will be applied to the address parts of cseUcastCacheSource/
cseUcastCacheDest appropriately.
'srcAndDst' - causes purge of flows in the cache whose both
absolute source and destination IP addresses match the address
parts of values set in cseUcastCacheSource and cseUcastCacheDest
objects. If cseUcastCacheSrcMask and cseUcastCacheDestMask also
specified, they will be applied to the address parts of
cseUcastCacheSource and cseUcastCacheDest.
'fullFlow' - causes purge of IP flows whose IP addresses and
transport port numbers match the values set in cseUcastCacheDest
and cseUcastCacheSource objects.
If either cseUcastCacheDestMask or cseUcastCacheSrcMask objects
have valid values, they will be applied to the respective address
parts of cseUcastCacheDest and cseUcastCacheSource objects.
This option is typically used to purge flows relevant to specific
applications such as FTP, WWW, TELNET, etc.
'ipxDstOnly' - causes purge of IPX flows in the cache whose
absolute destination IPX address match the address part of
the value set in cseUcastCacheDest object.
if cseUcastCacheDestMask holds valid value at the same time,
it will be applied to the address part of cseUcastCacheDest.
'ipxSrcAndDst' - causes purge of IPX flows in the cache whose
both absolute source and destination IPX addresses match the
address parts of the values set in cseUcastCacheSource and
cseUcastCacheDest objects.
If either of cseUcastCacheSrcMask or cseUcastCacheDestMask
have valid values at the same time, they will be applied to
the respective address parts of cseUcastCacheSource and
cseUcastCacheDest objects.
'any' - causes purge of all established flows currently in
the cache. The values of cseUcastCacheDest, cseUcastCacheSource,
cseUcastCacheDestMask, cseUcastCacheSrcMask, and
cseUcastCacheTransport should be ignored in this case.
Note:
1. When the row instance is initialized, the value of this
object instance will be set to 'any'.
2. The rest flow parameter variables will not be instantiated
until they get set by management applications based on
the value of cseUcastCacheFlowType object."
DEFVAL { any }
::= { cseUcastCacheEntry 2 }
cseUcastCacheTransport OBJECT-TYPE
SYNTAX INTEGER {
udp(1),
tcp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP transport protocol type (if applicable) of the specified
switched flows to be purged; it will be instantiated if and only
if it gets set by the management applications and the value of
cseUcastCacheFlowMask is equal to 'fullFlow'.
Its value can not be modified when the corresponding instance
of cseUcastCacheStatus is 'active'."
::= { cseUcastCacheEntry 3 }
cseUcastCacheDest OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination network address and port number (if applicable).
The port field is ignored for IPX flows and IP flows if the
value of cseUcastCacheFlowMask is not equal to 'fullFlow'.
Its value can not be modified when the corresponding instance
of cseUcastCacheStatus is 'active'."
::= { cseUcastCacheEntry 4 }
cseUcastCacheDestMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If instantiated, specified and applicable, the destination
address mask will be applied to the value of
cseUcastCacheDest in the same row instance.
Its value can not be modified when the corresponding instance
of cseUcastCacheStatus is 'active'."
::= { cseUcastCacheEntry 5 }
cseUcastCacheSource OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source network address and port number (if applicable).
The port field is ignored for IPX flows and IP flows if the
value of cseUcastCacheFlowMask is not equal to 'fullFlow'.
Its value can not be modified when the corresponding instance
of cseUcastCacheStatus is 'active'."
::= { cseUcastCacheEntry 6 }
cseUcastCacheSrcMask OBJECT-TYPE
SYNTAX FlowAddressComponent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If instantiated, specified and applicable, the source address
mask will be applied to the value of cseUcastCacheSource
in the same row instance.
Its value can not be modified when the corresponding instance
of cseUcastCacheStatus is 'active'."
::= { cseUcastCacheEntry 7 }
cseUcastCacheRtrIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address of the router (internal or external) for which the
flows are being switched, and need to be purged. An 'all-zero'
value is a wildcard IP address for any router.
Its value can not be modified when the corresponding instance
of cseUcastCacheStatus is 'active'."
::= { cseUcastCacheEntry 8 }
cseUcastCacheOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The manager entity that configured this entry and is therefore
using the resources assigned to it."
::= { cseUcastCacheEntry 9 }
cseUcastCacheResult OBJECT-TYPE
SYNTAX INTEGER {
purging(1),
notPurging(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"state of the flow purging operation.
'purging' - purging operation is proceeding
'notPurging' - the purging operation completed, or not
started yet."
DEFVAL { notPurging }
::= { cseUcastCacheEntry 11 }
cseUcastCacheStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage rows in this table.
When set to active(1), the flow purge is initiated, and
the value of cseUcastCacheResult object becomes 'purging'.
However, this object can be set to active(1) only after
all the appropriate objects for this query as defined
by the value set in the cseUcastCacheFlowType object,
have also been set. Upon the completion of flow purge,
the value of cseUcastCacheResult object changes to
'notPurging'.
Once a row becomes active, values within the row cannot
be modified, except by setting it to 'notInService' first,
or deleting and re-creating it."
::= { cseUcastCacheEntry 10 }
-- This MIB group/table is designed for purging IP multicast
-- flows. For a multicast switch, a row instance can be used to clear
-- specified multicast L3 flows from its cache pools
cseMcastCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseMcastCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A control table used to purge specified IP multicast flows
from the switch engine."
::= { cseMcastCache 1 }
cseMcastCacheEntry OBJECT-TYPE
SYNTAX CseMcastCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cseMcastCacheTable, used to set up
flow clearing criteria. The actual purging is started by setting
the value of cseMcastCacheStatus to 'active'. Once a row becomes
active, values within the row cannot be modified, except by
setting it to 'notInService' first, or deleting and re-creating
the row."
INDEX { cseMcastCacheIndex }
::= { cseMcastCacheTable 1 }
CseMcastCacheEntry ::= SEQUENCE {
cseMcastCacheIndex Unsigned32,
cseMcastCacheFlowType INTEGER,
cseMcastCacheGrp McastGroupIp,
cseMcastCacheSrc IpAddress,
cseMcastCacheRtrIp IpAddress,
cseMcastCacheOwner OwnerString,
cseMcastCacheResult INTEGER,
cseMcastCacheStatus RowStatus
}
cseMcastCacheIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which uniquely identifies the flow
purge contained in the current row instance."
::= { cseMcastCacheEntry 1 }
cseMcastCacheFlowType OBJECT-TYPE
SYNTAX INTEGER {
any(1),
group(2),
grpAndSrc(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting each value causes the appropriate action:
'any' - causes purge of all established IP multicast
layer 3 flows in the cache. The value of cseMcastCacheGrp,
and cseMcastCacheSrc will be ignored in this case.
'group' - causes purge of flows whose multicast
group IP address match the values of cseMcastCacheGrp.
'grpAndSrc' - causes purge of multicast flows whose both
group IP address and source Ip address match the
values of cseMcastCacheGrp and cseMcastCacheSrc.
Note:
1. The instance of this object is initialized to
'any' when the corresponding row instance is
being instantiated.
2. Flow parameter variables, cseMcastCacheGrp,
cseMcastCacheSrc, cseMcastCacheRtrIp will not
be instantiated until they get set by management
applications (in such cases, cseMcastCacheFlowType
object should be set to a value other than 'any')."
DEFVAL { any }
::= { cseMcastCacheEntry 2 }
cseMcastCacheGrp OBJECT-TYPE
SYNTAX McastGroupIp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifying multicast group IP address of the flows to be
cleared. Its value can not be modified when the corresponding
instance of cseMcastCacheStatus is 'active'."
::= { cseMcastCacheEntry 3 }
cseMcastCacheSrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source address of the IP multicast flows to be purged.
Its value can not be modified when the corresponding instance
of cseMcastCacheStatus is 'active'."
::= { cseMcastCacheEntry 4 }
cseMcastCacheRtrIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the router whose flows are currently
being switched, and will be purged. An 'all-zero' value is
a wildcard IP address for any router.
Its value can not be modified when the corresponding instance
of cseMcastCacheStatus is 'active'."
::= { cseMcastCacheEntry 5 }
cseMcastCacheOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The manager entity that configured this entry and is therefore
using the resources assigned to it."
::= { cseMcastCacheEntry 6 }
cseMcastCacheResult OBJECT-TYPE
SYNTAX INTEGER {
purging(1),
notPurging(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"state of the flow purging operation.
'purging' - purging operation is proceeding
'notPurging' - the purging operation completed, or not
started yet."
DEFVAL { notPurging }
::= { cseMcastCacheEntry 7 }
cseMcastCacheStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage rows in this table.
When set to active(1), the flow purge is initiated, and
the value of cseMcastCacheResult object becomes 'purging'.
However, this object can be set to active(1) only after
all the appropriate objects for this query as defined
by the value set in the cseMcastCacheFlowType object,
have also been set. Upon the completion of flow purge,
the value of cseMcastCacheResult object changes to
'notPurging'.
Once a row becomes active, values within the row cannot
be modified, except by setting it to 'notInService' first,
or deleting and re-creating it."
::= { cseMcastCacheEntry 8 }
-- cseCef Group
--
--
-- The cseCefFibTable
cseCefFibTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseCefFibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information stored in the device's
forwarding information base (FIB).
FIB is a forwarding scheme that utilizes matching pattern
to provide optimized lookup for efficient packet forwarding.
It contains a forwarding table which consist of matching
criteria for incoming traffic as well as information to
forward traffic that matched defined criteria."
::= { cseCef 1 }
cseCefFibEntry OBJECT-TYPE
SYNTAX CseCefFibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the IP address type, the final destination
IP address, the final destination IP address mask as well as
the FIB entry type."
INDEX { cseCefFibIndex }
::= { cseCefFibTable 1 }
CseCefFibEntry ::= SEQUENCE {
cseCefFibIndex Unsigned32,
cseCefFibAddrType InetAddressType,
cseCefFibDestIp InetAddress,
cseCefFibDestIpMask InetAddress,
cseCefFibType INTEGER
}
cseCefFibIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table entry."
::= { cseCefFibEntry 1 }
cseCefFibAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of IP address denoted in cseCefFibDestIp and
cseCefFibDestIpMask object."
::= { cseCefFibEntry 2 }
cseCefFibDestIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address specified in IP packet header."
::= { cseCefFibEntry 3 }
cseCefFibDestIpMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The specified destination IP address mask."
::= { cseCefFibEntry 4 }
cseCefFibType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
resolved(2),
bridge(3),
drop(4),
connected(5),
receive(6),
wildcard(7),
tunnel(8),
default(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the FIB entry type.
other(1) indicates that this FIB entry type is none
of the following.
resolved(2) indicates that IP traffic matched the
destination prefix of this entry is associated with a
valid next-hop address.
bridge(3) indicates that IP traffic matched the destination
prefix of this entry will be forwarded using Layer 2
look up result.
drop(4) indicates that IP traffic matched the destination
prefix of this entry will be dropped.
connected(5) indicates that IP traffic matched the destination
prefix of this entry is associated with a connected network.
receive(6) indicates that IP traffic matched the destination
prefix of this entry will be sent to a router interface.
wildcard(7) indicates this FIB entry will match all traffic.
tunnel(8) indicates this FIB entry applied to tunneling
traffic.
default(9) indicates that IP traffic matched the destination
prefix of this entry will be forwarded using a default route."
::= { cseCefFibEntry 5 }
-- The cseCefAdjacencyTable
cseCefAdjacencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseCefAdjacencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information stored in the device's
adjacency table. Entry in this table is linked to entry
of cseCefFibTable by its cseCefFibIndex object."
::= { cseCef 3 }
cseCefAdjacencyEntry OBJECT-TYPE
SYNTAX CseCefAdjacencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains next hop IP address, next-hop Ethernet
address, adjacency type, and number of bytes and packets
transmitted to each adjacency entry. Next hop encapsulation
type and MTU value are also available if supported by the
device."
INDEX {
cseCefFibIndex,
cseCefAdjacencyIndex
}
::= { cseCefAdjacencyTable 1 }
CseCefAdjacencyEntry ::= SEQUENCE {
cseCefAdjacencyIndex Unsigned32,
cseCefAdjacencyAddrType InetAddressType,
cseCefAdjacencyNextHopIp InetAddress,
cseCefAdjacencyNextHopMac MacAddress,
cseCefAdjacencyNextHopIfIndex InterfaceIndexOrZero,
cseCefAdjacencyType INTEGER,
cseCefAdjacencyPkts Counter64,
cseCefAdjacencyOctets Counter64,
cseCefAdjacencyEncap INTEGER,
cseCefAdjacencyMTU Unsigned32
}
cseCefAdjacencyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The adjacency index of this table entry."
::= { cseCefAdjacencyEntry 1 }
cseCefAdjacencyAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of IP address denoted in cseCefAdjacencyNextHopIp
object."
::= { cseCefAdjacencyEntry 2 }
cseCefAdjacencyNextHopIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next hop IP address."
::= { cseCefAdjacencyEntry 3 }
cseCefAdjacencyNextHopMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next hop Ethernet address."
::= { cseCefAdjacencyEntry 4 }
cseCefAdjacencyNextHopIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the next hop interface ifIndex."
::= { cseCefAdjacencyEntry 5 }
cseCefAdjacencyType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
punt(2),
glean(3),
drop(4),
null(5),
noRewrite(6),
forceDrop(7),
connect(8),
unresolved(9),
loopback(10),
tunnel(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates this adjacency entry type.
other(1) indicates the adjacency entry type is none of
the following.
punt(2) indicates entry that sends traffic to the router.
glean(3) indicates entry that needs to be gleaned for incoming
traffic.
drop(4) indicates entry that drops packets.
null(5) indicates entry that drops packets destined
for the Null0 interface.
noRewrite(6) indicates entry that sends traffic to the router
when rewrite information is incomplete.
forceDrop(7) indicates entry that drop packets due to ARP
throttling.
connect(8) indicates entry that contains complete rewrite
information.
unresolved(9) indicates entry that next hop traffic is
unresolved.
loopback(10) indicates entry that drops packets destined
for loopback interface.
tunnel(11) indicates entry that next hop traffic is
through a tunnel."
::= { cseCefAdjacencyEntry 6 }
cseCefAdjacencyPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Layer 3 packets transmitted to
this adjacency entry."
::= { cseCefAdjacencyEntry 7 }
cseCefAdjacencyOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Layer 3 octets transmitted to
this adjacency entry."
::= { cseCefAdjacencyEntry 8 }
cseCefAdjacencyEncap OBJECT-TYPE
SYNTAX INTEGER {
arpa(1),
raw(2),
sap(3),
snap(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the next hop destination encapsulation type.
arpa(1) indicates that next hop destination used ARPA
encapsulation type to forward packets.
raw(2) indicates that next hop destination used RAW
encapsulation type to forward packets.
sap(3) indicates that next hop destination used SAP
encapsulation type to forward packets.
snap(4) indicates that next hop destination used SNAP
encapsulation type to forward packets."
::= { cseCefAdjacencyEntry 9 }
cseCefAdjacencyMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the next hop destination MTU value."
::= { cseCefAdjacencyEntry 10 }
-- cseTcamUsage group
--
--
-- The cseTcamUsageTable
cseTcamUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseTcamUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the resource usage of TCAM (Ternary
Content Addressable Memory) in the device. Not all the
resource types denoted by cseTcamResourceType object
are supported. If that is the case, the corresponding row
for that type will not be instantiated in this table."
::= { cseTcamUsage 1 }
cseTcamUsageEntry OBJECT-TYPE
SYNTAX CseTcamUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a short description of the resource type,
the total amount of TCAM allocated for that type as well
as the amount of allocated resource has been used up."
INDEX {
entPhysicalIndex,
cseTcamResourceType
}
::= { cseTcamUsageTable 1 }
CseTcamUsageEntry ::= SEQUENCE {
cseTcamResourceType INTEGER,
cseTcamResourceDescr SnmpAdminString,
cseTcamResourceUsed Unsigned32,
cseTcamResourceTotal Unsigned32
}
cseTcamResourceType OBJECT-TYPE
SYNTAX INTEGER {
aclStorageMask(1),
aclStorageValue(2),
aclDynamicStorageMask(3),
aclDynamicStorageValue(4),
qosStorageMask(5),
qosStorageValue(6),
qosDynamicStorageMask(7),
qosDynamicStorageValue(8),
l4PortOperator(9),
interfaceMapping(10),
ingressInterfaceMapping(11),
egressInterfaceMapping(12),
louSource(13),
louDestination(14),
andOr(15),
orAnd(16),
aclAdjacency(17),
aclHighStorageMask(18),
aclHighStorageValue(19),
aclLowStorageMask(20),
aclLowStorageValue(21),
qosHighStorageMask(22),
qosHighStorageValue(23),
qosLowStorageMask(24),
qosLowStorageValue(25),
sgacl(26),
accounting(27),
ipv6Ext(28),
ethertype(29),
destInfo(30),
dgtSgtRegion(31),
anyAnyRegion(32),
tcamALabel(33),
tcamBLabel(34),
destInfoIn(35),
destInfoOut(36),
tcam0Bank0(37),
tcam0Bank1(38),
tcam1Bank0(39),
tcam1Bank1(40),
tcam0Aggregate(41),
tcam1Aggregate(42),
bank0Aggregate(43),
bank1Aggregate(44),
lou(45),
bothLouOperands(46),
singleLouOperands(47),
louL4SourcePort(48),
louL4DstPort(49),
louL3PacketLength(50),
louIpTos(51),
louIpDscp(52),
louIpPrecedence(53),
louIpTtl(54),
tcpFlags(55),
l4DynamicProtocolCam(56),
macEtypeOrProtoCam(57),
nonL4OpLabelsTcam0(58),
nonL4OpLabelsTcam1(59),
l4OpLabelTcam0(60),
l4OpLabelTcam1(61),
ingressDestInfoTable(62),
egressDestInfoTable(63),
ingressTcam(64),
ingressIpv6Tcam(65),
ingressLou(66),
ingressBothLouOperands(67),
ingressSingleLouOperands(68),
ingressLouL4SourcePort(69),
ingressLouL4DstPort(70),
ingressLouL3PacketLength(71),
ingressLouL3Ttl(72),
ingressLouL2Ttl(73),
ingressTcpFlags(74),
egressTcam(75),
egressIpv6Tcam(76),
egressLou(77),
egressBothLouOperands(78),
egressSingleLouOperands(79),
egressLouL4SourcePort(80),
egressLouL4DstPort(81),
egressLouL3PacketLength(82),
egressLouL3Ttl(83),
egressLouL2Ttl(84),
egressTcpFlags(85),
l4OpLabelTcam2(86),
l4OpLabelTcam3(87),
l4OpLabelTcam4(88),
l4OpLabelTcam5(89),
l4OpLabelTcam6(90),
l4OpLabelTcam7(91),
l4OpLabelTcam8(92),
l4OpLabelTcam9(93),
l4OpLabelTcam10(94),
l4OpLabelTcam11(95),
l4OpLabelTcam12(96),
l4OpLabelTcam13(97),
l4OpLabelTcam14(98),
l4OpLabelTcam15(99),
l4OpLabelTcam16(100),
l4OpLabelTcam17(101),
l4OpLabelTcam18(102),
l4OpLabelTcam19(103),
ingressPacl(104),
ingressVacl(105),
ingressRacl(106),
ingressRbacl(107),
ingressNbm(108),
ingressL2Qos(109),
ingressL3VlanQos(110),
ingressSup(111),
ingressL2SpanAcl(112),
ingressL3VlanSpanAcl(113),
ingressFstat(114),
ingressLatency(115),
span(116),
nat(117),
egressVacl(118),
egressRacl(119),
egressRbacl(120),
egressSup(121),
egressL2Qos(122),
egressL3VlanQos(123),
netflowAnalyticsFilterTcam(124),
ingressNetflowL3(125),
ingressNetflowL2(126),
featureVxLanOam(127),
featureBfd(128),
featureDhcpSnoop(129),
ingressRedirect(130),
featureDhcpV6Relay(131),
featureArpSnoop(132),
featureDhcpSnoopFhs(133),
featureDhcpVaclFhs(134),
featureDhcpSisf(135),
egressSystem(136),
rplusEgressSystem(137),
supSystem(138),
rplusSupSystem(139),
fmSupSystem(140),
supCopp(141),
rplusSupCopp(142),
supCoppReasonCode(143),
ingressIpv4Pacl(144),
ingressIpv6Pacl(145),
ingressMacPacl(146),
ingressFexIpv4Pacl(147),
ingressFexIpv6Pacl(148),
ingressFexMacPacl(149),
ingressIpv4PortQos(150),
ingressIpv4PortQosLite(151),
ingressIpv6PortQos(152),
ingressMacPortQos(153),
ingressIpv4FexPortQos(154),
ingressIpv4FexPortQosLite(155),
ingressIpv6FexPortQos(156),
ingressMacFexPortQos(157),
ingressIpv4Vacl(158),
ingressIpv6Vacl(159),
ingressMacVacl(160),
ingressIpv4VlanQos(161),
ingressIpv4VlanQosLite(162),
ingressIpv6VlanQos(163),
ingressMacVlanQos(164),
ingressIpv4Racl(165),
ingressIpv6Racl(166),
ingressIpv4L3Qos(167),
ingressIPv4L3QosLite(168),
ingressIPv6L3Qos(169),
ingressMacL3Qos(170),
ingressFlowCounters(171),
ingressSviCounters(172),
egressIpv4Vacl(173),
egressIpv6Vacl(174),
egressMacVacl(175),
egressIpv4Qos(176),
egressIpv4QosLite(177),
egressIpv6Qos(178),
egressMacQos(179),
rplusIngressEgressIpv4Qos(180),
redirect(181),
rplusIngressEgressIpv4QosLite(182),
rplusIngressEgressIpv6Qos(183),
rplusIngressEgressMacQos(184),
egressIpv4Racl(185),
egressIpv6Racl(186),
egressFlowCounters(187),
ingressNsIpv4PortQos(188),
ingressNsIpv6PortQos(189),
ingressNsMacPortQos(190),
ingressNsIpv4VlanQos(191),
ingressNsIpv6VlanQos(192),
ingressNsMacVlanQos(193),
ingressNsIpv4L3Qos(194),
ingressNsIpv6L3Qos(195),
vpcConvergence(196),
ipsgSmacIpBindingTable(197),
openflowAcl(198),
openflowIpv6Acl(199),
ingressEtherAcl(200),
mplsFeature(201),
ingressIpv4Qos(202),
ingressIpv6Qos(203),
ipv6Sup(204),
ingressIpv4Pbr(205),
ingressIpv6Pbr(206),
ingressIpv4PaclDoubleWide(207),
arpAcl(208),
sflowNorthstarAcl(209),
mcastBidir(210),
redirectTunnel(211),
ingressFcoeCounters(212),
egressFcoeCounters(213),
spanSflowCombined(214),
mcastPerformance(215),
fhs(216),
openflowLiteAcl(217),
ipv6DestCompression(218),
ingressIpv4RaclLite(219),
ipv6SrcCompression(220),
ipv4RaclSpanUdf(221),
ingressIpv4PortQosIntraTcamLite(222),
ingressIpv4L3QosIntraTcamLite(223),
ingressIpv4VlanQosIntraTcamLite(224),
ipv4PaclSpanUdf(225),
coppSystem(226),
ingressIpv4PaclLite(227),
ingressIpv4VaclLite(228),
vxLanXConnect(229),
dot1X(230),
dot1XMultiAuth(231),
ingressPaclAll(232),
ingressRaclAll(233),
ingressVaclAll(234),
ingressMacPqos(235),
ingressIpv4Pqos(236),
ingressIpv6Pqos(237),
ingressPqos(238),
ingressMacVqos(239),
ingressIpv4Vqos(240),
ingressIpv6Vqos(241),
ingressVqosAll(242),
ingressIpv4L3qos(243),
ingressIpv6L3qos(244),
ingressL3qosAll(245),
ingressCopp(246),
ingressMacSpan(247),
ingressIpv4Span(248),
ingressSpan(249),
ingressSpanAll(250),
egressRaclAll(251),
egressVaclAll(252),
egressMacPortQos(253),
egressIpv4PortQos(254),
egressIv6PortQos(255),
egressPortQos(256),
egressMacVlanQos(257),
egressIpv4VlanQos(258),
egressIpv6VlanQos(259),
egressVlanQos(260),
egressIpv4L3Qos(261),
egressIpv6L3Qos(262),
egressL3QosAll(263),
egressMacSpan(264),
egressIpv4Span(265),
egressIpv6Span(266),
egressSpanAll(267),
dhcp(268),
labelLblA(269),
labelLblB(270),
labelLblD(271),
labelLblE(272),
labelLblF(273),
labelLblG(274),
labelLblH(275),
labelLblI(276),
labelLblK(277),
ingressSupAll(278),
egressSupAll(279),
ingressVlanSpan(280),
ingressNetflow(281),
ingressCntAcl(282),
egressCntAcl(283),
ingressHwTelemetry(284),
labelLblAv1(285),
labelLblBv1(286),
labelLblCv1(287),
labelLblDv1(288),
labelLblEv1(289),
labelLblFv1(290),
labelLblGv1(291),
labelLblHv1(292),
labelLblIv1(293),
labelLblJv1(294),
labelLblKv1(295),
labelLblLv1(296),
labelLblMv1(297),
labelLblNv1(298),
labelLblOv1(299),
labelLblPv1(300),
labelLblQv1(301),
labelLblRv1(302),
ingressNetflowAnalytics(303),
ingressNatOutside(304),
ingressNatInside(305),
ingressL2L3QosAll(306),
natRewriteTable(307),
tcpAwareNat(308)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The resource type which take up TCAM space.
aclStorageMask(1) indicates that TCAM space is allocated
to store ACL masks.
aclStorageValue(2) indicates that TCAM space is allocated
to store ACL value.
aclDynamicStorageMask(3) indicates that TCAM space is
allocated to dynamically store ACL masks.
aclDynamicStorageValue(4) indicates that TCAM space is
allocated to dynamically store ACL values.
qosStorageMask(5) indicates that TCAM space is allocated
to store QoS masks.
qosStorageValue(6) indicates that TCAM space is allocated
to store QoS value.
qosDynamicStorageMask(7) indicates that TCAM space is
allocated to dynamically store QoS masks.
qosDynamicStorageValue(8) indicates that TCAM space is
allocated to dynamically store QoS values.
l4PortOperator(9) indicates that TCAM space is allocated
for layer 4 port operators purpose.
interfaceMapping(10) indicates that TCAM space is allocated
for interface mapping purpose.
ingressInterfaceMapping(11) indicates that TCAM space is
allocated for ingress interface mapping purpose.
egressInterfaceMapping(12) indicates that TCAM space is
allocated for egress interface mapping purpose.
louSource(13) indicates that TCAM space is allocated
as source LOUs (Logical Operation Unit).
louDestination(14) indicates that TCAM space is allocated
as destination LOUs.
andOr(15) indicates that TCAM space is allocated for
ANDOR purpose.
orAnd(16) indicates that TCAM space is allocated for
ORAND purpose.
aclAdjacency(17) indicates that TCAM space is allocated
for ACL adjacency purpose.
aclHighStorageMask(18) indicates that high bank TCAM
space is allocated to store ACL masks.
aclHighStorageValue(19) indicates that high bank TCAM
space is allocated to store ACL value.
aclLowStorageMask(20) indicates that low bank TCAM space
is allocated to store ACL masks.
aclLowStorageValue(21) indicates that low bank TCAM space
is allocated to store ACL values.
qosHighStorageMask(22) indicates that high bank TCAM space
is allocated to store QoS masks.
qosHighStorageValue(23) indicates that high bank TCAM space
is allocated to store QoS value.
qosLowStorageMask(24) indicates that low bank TCAM space is
allocated to store QoS masks.
qosLowStorageValue(25) indicates that low bank TCAM space is
allocated to store QoS values.
sgacl(26) indicates that TCAM space is allocated for SGACL
(Security Group Access Control List) purpose.
accounting(27) indicates that TCAM space is allocated
for accounting purpose such as AS (Autonomous System)
based accounting, classification based accounting.
ipv6Ext(28) indicates that TCAM space is allocated for
IPv6 Extended Header lookup purpose.
ethertype(29) indicates that TCAM space is allocated for
layer2 ethertype lookup purpose.
destInfo(30) indicates that TCAM space is allocated for
destination information lookup purpose.
dgtSgtRegion(31) indicates that TCAM space is allocated for
specific SGT (Secutiry Group Tag), DGT (Destination Group Tag)
pairs.
anyAnyRegion(32) indicates that TCAM space is allocated for
SGT (Secutiry Group Tag), DGT (Destination Group Tag) pairs
with one or both of them as ANY.
tcamALabel(33) indicates that TCAM space is allocated for
labels used by TCAM A entries.
tcamBLabel(34) indicates that TCAM space is allocated for
labels used by TCAM B entries.
destInfoIn(35) indicates that TCAM space is allocated for
destination information table for IFE (Ingress Forwarding Engine)
ACL redirects.
destInfoOut(36) indicates that TCAM space is allocated for
destination information table for OFE (Output/Egress Forwarding
Engine) ACL redirects.
tcam0Bank0(37) indicates that TCAM space is allocated for
TCAM 0 Bank 0.
tcam0Bank1(38) indicates that TCAM space is allocated for
TCAM 0 Bank 1.
tcam1Bank0(39) indicates that TCAM space is allocated for
TCAM 1 Bank 0.
tcam1Bank1(40) indicates that TCAM space is allocated for
TCAM 1 Bank 1.
tcam0Aggregate(41) indicates that TCAM space is allocated for
the aggregate of Bank 0 and Bank 1 on TCAM 0.
tcam1Aggregate(42) indicates that TCAM space is allocated for
the aggregate of Bank 0 and Bank 1 on TCAM 1.
bank0Aggregate(43) indicates that TCAM space is allocated for
the aggregate of TCAM 0 and TCAM 1 for Bank 0.
bank1Aggregate(44) indicates that TCAM space is allocated for
the aggregate of TCAM 0 and TCAM 1 for Bank 1.
lou(45) indicates that TCAM space is allocated for
LOUs (Logical Operation Unit).
bothLouOperands(46) indicates that TCAM space is allocated for
LOUs with both operands.
singleLouOperands(47) indicates that TCAM space is allocated for
LOUs with single operands.
louL4SourcePort(48) indicates that TCAM space is allocated for
LOUs with L4 source port in comparison.
louL4DstPort(49) indicates that TCAM space is allocated for
LOUs with L4 destination port in comparison.
louL3PacketLength(50) indicates that TCAM space is allocated for
LOUs with L3 Length in comparison.
louIpTos(51) indicates that TCAM space is allocated for
LOUs with IP ToS (Type of Service) in comparison.
louIpDscp(52) indicates that TCAM space is allocated for
LOUs with IP DSCP (Differentiated Services Code Point)
in comparison.
louIpPrecedence(53) indicates that TCAM space is allocated for
LOUs with IP Precedence in comparison.
louIpTtl(54) indicates that TCAM space is allocated for
LOUs with IP TTL in comparison.
tcpFlags(55) indicates that TCAM space is allocated for
TCP Flags.
l4DynamicProtocolCam(56) indicates that TCAM space is allocated for
L4 Dynamic Protocol CAM.
macEtypeOrProtoCam(57) indicates that TCAM space is allocated for
MAC Etype or Protocol CAM.
nonL4OpLabelsTcam0(58) indicates that TCAM space is allocated for
labels without using any L4 operator resources like LOUs or TCP Flags
for TCAM 0.
nonL4OpLabelsTcam1(59) indicates that TCAM space is allocated for
labels without using any L4 operator resources like LOUs or TCP Flags
for TCAM 1.
l4OpLabelTcam0(60) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 0.
l4OpLabelTcam1(61) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 1.
ingressDestInfoTable(62) indicates that TCAM space is allocated for
Ingress Destination Info Table.
egressDestInfoTable(63) indicates that TCAM space is allocated for
Egress Destination Info Table.
ingressTcam(64) indicates that ingress TCAM resource utilization.
ingressIpv6Tcam(65) indicates that ingress TCAM space is allocated
for IPv6 compression.
ingressLou(66) indicates that ingress TCAM space is allocated for
LOUs (Logical Operation Unit).
ingressBothLouOperands(67) indicates that ingress TCAM space is
allocated for LOUs with both operands.
ingressSingleLouOperands(68) indicates that ingress TCAM space is
allocated for LOUs with single operands.
ingressLouL4SourcePort(69) indicates that ingress TCAM space is
allocated for LOUs with L4 source port in comparison.
ingressLouL4DstPort(70) indicates that ingress TCAM space is
allocated for LOUs with L4 destination port in comparison.
ingressLouL3PacketLength(71) indicates that ingress TCAM space is
allocated for LOUs with L3 Length in comparison.
ingressLouL3Ttl(72) indicates that ingress TCAM space is allocated
for LOUs with L3 TTL in comparison.
ingressLouL2Ttl(73) indicates that ingress TCAM space is allocated
for LOUs with L2 TTL in comparison.
ingressTcpFlags(74) indicates that ingress TCAM space is allocated
for TCP Flags.
egressTcam(75) indicates that egress TCAM resource utilization.
egressIpv6Tcam(76) indicates that egress TCAM space is allocated
for IPv6 compression.
egressLou(77)indicates that egress TCAM space is allocated for
LOUs (Logical Operation Unit).
egressBothLouOperands(78) indicates that egress TCAM space is
allocated for LOUs with both operands.
egressSingleLouOperands(79) indicates that egress TCAM space is
allocated for LOUs with single operands.
egressLouL4SourcePort(80) indicates that egress TCAM space is
allocated for LOUs with L4 source port in comparison.
egressLouL4DstPort(81) indicates that egress TCAM space is
allocated for LOUs with L4 destination port in comparison.
egressLouL3PacketLength(82) indicates that egress TCAM space is
allocated for LOUs with L3 Length in comparison.
egressLouL3Ttl(83) indicates that egress TCAM space is allocated
for the LOUs with L3 TTL in comparison.
egressLouL2Ttl(84) indicates that egress TCAM space is allocated
for LOUs with L2 TTL in comparison.
egressTcpFlags(85) indicates that egress TCAM space is allocated
for TCP Flags.
l4OpLabelTcam2(86) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 2.
l4OpLabelTcam3(87) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 3.
l4OpLabelTcam4(88) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 4.
l4OpLabelTcam5(89) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 5.
l4OpLabelTcam6(90) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 6.
l4OpLabelTcam7(91) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 7.
l4OpLabelTcam8(92) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 8.
l4OpLabelTcam9(93) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 9.
l4OpLabelTcam10(94) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 10.
l4OpLabelTcam11(95) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 11.
l4OpLabelTcam12(96) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 12.
l4OpLabelTcam13(97) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 13.
l4OpLabelTcam14(98) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 14.
l4OpLabelTcam15(99) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 15.
l4OpLabelTcam16(100) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 16.
l4OpLabelTcam17(101) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 17.
l4OpLabelTcam18(102) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 18.
l4OpLabelTcam19(103) indicates that TCAM space is allocated for
labels using any L4 operator resources like LOUs or TCP Flags
for TCAM 19.
ingressPacl(104) indicates that ingress TCAM space is allocated
for PACL.
ingressVacl(105) indicates that ingress TCAM space is allocated
for VACL.
ingressRacl(106) indicates that ingress TCAM space is allocated
for RACL.
ingressRbacl(107) indicates that ingress TCAM space is allocated
for RBACL.
ingressNbm(108) indicates that ingress TCAM space is allocated
for NBM.
ingressL2Qos(109) indicates that ingress TCAM space is allocated
for L2 QoS.
ingressL3VlanQos(110) indicates that ingress TCAM space is allocated
for L3/VLAN QOS.
ingressSup(111) indicates that ingress TCAM space is allocated for
SUP.
ingressL2SpanAcl(112) indicates that ingress TCAM space is allocated
for L2 SPAN ACL.
ingressL3VlanSpanAcl(113) indicates that ingress TCAM space is
allocated for L3/VLAN SPAN ACL.
ingressFstat(114) indicates that ingress TCAM space is allocated
for FSTAT.
ingressLatency(115) indicates that ingress TCAM space is allocated
for LATENCY.
span(116) indicates that TCAM space is allocated for SPAN.
nat(117) indicates that TCAM space is allocated for NAT.
egressVacl(118) indicates that egress TCAM space is allocated
for VACL.
egressRacl(119) indicates that egress TCAM space is allocated
for RACL.
egressRbacl(120) indicates that egress TCAM space is allocated
for RBACL.
egressSup(121) indicates that egress TCAM space is allocated for
SUP.
egressL2Qos(122) indicates that egress TCAM space is allocated
for L2 QoS.
egressL3VlanQos(123) indicates that egress TCAM space is allocated
for L3/VLAN QoS.
netflowAnalyticsFilterTcam(124) indicates that TCAM space is
allocated for Netflow/Analytics Filter.
ingressNetflowL3(125) indicates that ingress TCAM space is allocated
for L3 Netflow.
ingressNetflowL2(126) indicates that ingress TCAM space is allocated
for L2 Netflow.
featureVxLanOam(127) indicates that TCAM space is allocated for
Feature VxLAN OAM.
featureBfd(128) indicates that TCAM space is allocated for Feature
BFD.
featureDhcpSnoop(129) indicates that TCAM space is allocated for
Feature DHCP SNOOP.
ingressRedirect(130) indicates that TCAM space is allocated for
ingress REDIRECT.
featureDhcpV6Relay(131) indicates that TCAM space is allocated for
Feature DHCPv6 RELAY.
featureArpSnoop(132) indicates that TCAM space is allocated for
Feature ARP SNOOP.
featureDhcpSnoopFhs(133) indicates that TCAM space is allocated for
Feature DHCP SNOOP FHS.
featureDhcpVaclFhs(134) indicates that TCAM space is allocated for
Feature DHCP VACL FHS.
featureDhcpSisf(135) indicates that TCAM space is allocated for
Feature DHCP SISF.
egressSystem(136) indicates that egress TCAM space is allocated for
System.
rplusEgressSystem(137) indicates that TCAM space is allocated for
RPLUS Egress System.
supSystem(138) indicates that TCAM space is allocated for SUP System.
rplusSupSystem(139) indicates that TCAM space is allocated for RPLUS
SUP System.
fmSupSystem(140) indicates that TCAM space is allocated for FM SUP
System.
supCopp(141) indicates that TCAM space is allocated for SUP COPP.
rplusSupCopp(142) indicates that TCAM space is allocated for RPLUS
SUP COPP.
supCoppReasonCode(143) indicates that TCAM space is allocated for
SUP COPP Reason Code.
ingressIpv4Pacl(144) indicates that ingress TCAM space is allocated
for IPv4 PACL.
ingressIpv6Pacl(145) indicates that ingress TCAM space is allocated
for IPv6 PACL.
ingressMacPacl(146) indicates that ingress TCAM space is allocated
for MAC PACL.
ingressFexIpv4Pacl(147) indicates that ingress TCAM space is
allocated for Fex IPv4 PACL.
ingressFexIpv6Pacl(148) indicates that ingress TCAM space is
allocated for Ingress Fex IPv6 PACL.
ingressFexMacPacl(149) indicates that ingress TCAM space is
allocated for Ingress Fex MAC PACL.
ingressIpv4PortQos(150) indicates that ingress TCAM space is
allocated for IPv4 Port QoS.
ingressIpv4PortQosLite(151) indicates that ingress TCAM space is
allocated for IPv4 Port QoS (Lite).
ingressIpv6PortQos(152) indicates that ingress TCAM space is
allocated for IPv6 Port QoS.
ingressMacPortQos(153) indicates that ingress TCAM space is
allocated for MAC Port QoS.
ingressIpv4FexPortQos(154) indicates that ingress TCAM space is
allocated for IPv4 FEX Port QoS.
ingressIpv4FexPortQosLite(155) indicates that ingress TCAM space
is allocated for IPv4 FEX Port QoS (Lite).
ingressIpv6FexPortQos(156) indicates that ingress TCAM space is
allocated for IPv6 FEX Port QoS.
ingressMacFexPortQos(157) indicates that ingress TCAM space is
allocated for MAC FEX Port QoS.
ingressIpv4Vacl(158) indicates that ingress TCAM space is allocated
for IPv4 VACL.
ingressIpv6Vacl(159) indicates that ingress TCAM space is allocated
for IPv6 VACL.
ingressMacVacl(160) indicates that ingress TCAM space is allocated
for MAC VACL.
ingressIpv4VlanQos(161) indicates that ingress TCAM space is
allocated for IPv4 VLAN QoS.
ingressIpv4VlanQosLite(162) indicates that ingress TCAM space is
allocated for IPv4 VLAN QoS (Lite).
ingressIpv6VlanQos(163) indicates that ingress TCAM space is
allocated for IPv6 VLAN QoS.
ingressMacVlanQos(164) indicates that ingress TCAM space is allocated
for MAC VLAN QoS.
ingressIpv4Racl(165) indicates that ingress TCAM space is allocated
for IPv4 RACL.
ingressIpv6Racl(166) indicates that ingress TCAM space is allocated
for IPv6 RACL.
ingressIpv4L3Qos(167) indicates that ingress TCAM space is allocated
for IPv4 L3 QoS.
ingressIPv4L3QosLite(168) indicates that ingress TCAM space is
allocated for IPv4 L3 QoS (Lite).
ingressIPv6L3Qos(169) indicates that ingress TCAM space is allocated
for IPv6 L3 QoS.
ingressMacL3Qos(170) indicates that ingress TCAM space is allocated
for MAC L3 QoS.
ingressFlowCounters(171) indicates that TCAM space is allocated for
ingress Flow Counters.
ingressSviCounters(172) indicates that TCAM space is allocated for
Ingress SVI Counters.
egressIpv4Vacl(173) indicates that egress TCAM space is allocated
for IPv4 VACL.
egressIpv6Vacl(174) indicates that egress TCAM space is allocated
for IPv6 VACL.
egressMacVacl(175) indicates that egress TCAM space is allocated
for MAC VACL.
egressIpv4Qos(176) indicates that egress TCAM space is allocated
for IPv4 QoS.
egressIpv4QosLite(177) indicates that egress TCAM space is allocated
for IPv4 QoS Lite.
egressIpv6Qos(178) indicates that egress TCAM space is allocated for
IPv6 QoS.
egressMacQos(179) indicates that egress TCAM space is allocated for
MAC QoS.
rplusIngressEgressIpv4Qos(180) indicates that TCAM space is allocated
for RPLUS Ingress/Egress IPv4 QoS.
redirect(181) indicates that TCAM space is allocated for Redirect.
rplusIngressEgressIpv4QosLite(182) indicates that TCAM space is
allocated for RPLUS Ingress/Egress IPv4 QoS Lite.
rplusIngressEgressIpv6Qos(183) indicates that TCAM space is allocated
for Ingress/Egress IPv6 QoS.
rplusIngressEgressMacQos(184) indicates that TCAM space is allocated
for Ingress/Egress MAC QoS.
egressIpv4Racl(185) indicates that egress TCAM space is allocated for
IPv4 RACL.
egressIpv6Racl(186) indicates that egress TCAM space is allocated for
IPv6 RACL.
egressFlowCounters(187) indicates that TCAM space is allocated for
Egress Flow Counters.
ingressNsIpv4PortQos(188) indicates that ingress TCAM space is
allocated for NS IPv4 Port QoS.
ingressNsIpv6PortQos(189) indicates that ingress TCAM space is
allocated for NS IPv6 Port QoS.
ingressNsMTCAM_MIB.myacPortQos(190) indicates that ingress TCAM space is
allocated for NS MAC Port QoS.
ingressNsIpv4VlanQos(191) indicates that ingress TCAM space is
allocated for NS IPv4 VLAN QoS.
ingressNsIpv6VlanQos(192) indicates that ingress TCAM space is
allocated for NS IPv6 VLAN QoS.
ingressNsMacVlanQos(193) indicates that ingress TCAM space is
allocated for NS MAC VLAN QoS.
ingressNsIpv4L3Qos(194) indicates that ingress TCAM space is
allocated for NS IPv4 L3 QoS.
ingressNsIpv6L3Qos(195) indicates that ingress TCAM space is
allocated for NS IPv6 L3 QoS.
vpcConvergence(196) indicates that TCAM space is allocated for
VPC Convergence.
ipsgSmacIpBindingTable(197) indicates that TCAM space is
allocated for IPSG SMAC-IP binding table.
openflowAcl(198) indicates that TCAM space is allocated for
OPENFLOW ACL.
openflowIpv6Acl(199) indicates that TCAM space is allocated
for OPENFLOW IPV6 ACL.
ingressEtherAcl(200) indicates that ingress TCAM space is
allocated for Ether ACL.
mplsFeature(201) indicates that TCAM space is allocated for
MPLS feature.
ingressIpv4Qos(202) indicates that ingress TCAM space is
allocated for IPv4 QoS.
ingressIpv6Qos(203) indicates that ingress TCAM space is
allocated for IPv6 QoS.
ipv6Sup(204) indicates that TCAM space is allocated for
IPV6 SUP.
ingressIpv4Pbr(205) indicates that ingress TCAM space is
allocated for IPv4 PBR.
ingressIpv6Pbr(206) indicates that ingress TCAM space is
allocated for IPv6 PBR.
ingressIpv4PaclDoubleWide(207) indicates that ingress TCAM
space is allocated for IPv4 PACL DoubleWide.
arpAcl(208) indicates that TCAM space is allocated for ARP ACL.
sflowNorthstarAcl(209) indicates that TCAM space is allocated for
sFlow Northstar ACL.
mcastBidir(210) indicates that TCAM space is allocated for mcast
bidir.
redirectTunnel(211) indicates that TCAM space is allocated for
Redirect TUNNEL.
ingressFcoeCounters(212) indicates that TCAM space is allocated
for Ingress FCoE Counters.
egressFcoeCounters(213) indicates that egress TCAM space is
allocated for Egress FCoE Counters.
spanSflowCombined(214) indicates that TCAM space is allocated for
SPAN SFLOW combined.
mcastPerformance(215) indicates that TCAM space is allocated for
mcast performance.
fhs(216) indicates that TCAM space is allocated for FHS.
openflowLiteAcl(217) indicates that TCAM space is allocated for
OPENFLOW LITE ACL.
ipv6DestCompression(218) indicates that TCAM space is allocated
for IPv6 Dest Compression.
ingressIpv4RaclLite(219) indicates that TCAM space is allocated
for Ingress IPv4 RACL Lite.
ipv6SrcCompression(220) indicates that TCAM space is allocated for
IPv6 Src Compression.
ipv4RaclSpanUdf(221) indicates that TCAM space is allocated for
IPV4 RACL SPAN UDF.
ingressIpv4PortQosIntraTcamLite(222) indicates that TCAM space is
allocated for Ingress IPv4 Port QoS (Intra-TCAM Lite).
ingressIpv4L3QosIntraTcamLite(223) indicates that TCAM space is
allocated for Ingress IPv4 L3 QoS (Intra-TCAM Lite).
ingressIpv4VlanQosIntraTcamLite(224) indicates that TCAM space is
allocated for Ingress IPv4 VLAN QoS (Intra-TCAM Lite).
ipv4PaclSpanUdf(225) indicates that TCAM space is allocated for IPV4
PACL SPAN UDF.
coppSystem(226) indicates that TCAM space is allocated for COPP
SYSTEM.
ingressIpv4PaclLite(227) indicates that TCAM space is allocated for
ingress IPv4 PACL lite.
ingressIpv4VaclLite(228) indicates that TCAM space is allocated for
ingress IPv4 VACL lite.
vxLanXConnect(229) indicates that TCAM space is allocated for VxLAN XConnect.
dot1X(230) indicates that TCAM space is allocated for DOT1X.
dot1XMultiAuth(231) indicates that TCAM space is allocated for DOT1X Multi
Auth.
ingressPaclAll(232) indicates that TCAM space is allocated for
Ingress PACL ALL.
ingressRaclAll(233) indicates that TCAM space is allocated for
Ingress RACL ALL.
ingressVaclAll(234) indicates that TCAM space is allocated for
Ingress VACL ALL.
ingressMacPqos(235) indicates that TCAM space is allocated for
Ingress MAC PQOS.
ingressIpv4Pqos(236) indicates that TCAM space is allocated for
Ingress IPV4 PQOS.
ingressIpv6Pqos(237) indicates that TCAM space is allocated for
Ingress IPV6 PQOS.
ingressPqos(238) indicates that TCAM space is allocated for Ingress PQOS.
ingressMacVqos(239) indicates that TCAM space is allocated for
Ingress MAC VQOS.
ingressIpv4Vqos(240) indicates that TCAM space is allocated for
Ingress IPV4 VQOS.
ingressIpv6Vqos(241) indicates that TCAM space is allocated for
Ingress IPV6 VQOS.
ingressVqosAll(242) indicates that TCAM space is allocated for
Ingress VQOS ALL.
ingressIpv4L3qos(243) indicates that TCAM space is allocated for
Ingress IPV4 L3QOS.
ingressIpv6L3qos(244) indicates that TCAM space is allocated for
Ingress IPV6 L3QOS.
ingressL3qosAll(245) indicates that TCAM space is allocated for
Ingress L3QOS ALL.
ingressCopp(246) indicates that TCAM space is allocated for Ingress COPP.
ingressMacSpan(247) indicates that TCAM space is allocated for
Ingress MAC SPAN.
ingressIpv4Span(248) indicates that TCAM space is allocated for
Ingress IPV4 SPAN.
ingressSpan(249) indicates that TCAM space is allocated for Ingress SPAN.
ingressSpanAll(250) indicates that TCAM space is allocated for
Ingress SPAN ALL.
egressRaclAll(251) indicates that TCAM space is allocated for
Egress RACL ALL.
egressVaclAll(252) indicates that TCAM space is allocated for
Egress VACL ALL.
egressMacPortQos(253) indicates that TCAM space is allocated for
Egress MAC Port QOS.
egressIpv4PortQos(254) indicates that TCAM space is allocated for
Egress IPV4 Port QOS.
egressIv6PortQos(255) indicates that TCAM space is allocated for
Egress IPv6 Port QOS.
egressPortQos(256) indicates that TCAM space is allocated for
Egress Port QOS.
egressMacVlanQos(257) indicates that TCAM space is allocated for
Egress MAC VLAN QOS.
egressIpv4VlanQos(258) indicates that TCAM space is allocated for
Egress IPV4 VLAN QOS.
egressIpv6VlanQos(259) indicates that TCAM space is allocated for
Egress IPV6 VLAN QOS.
egressVlanQos(260) indicates that TCAM space is allocated for
Egress VLAN QOS.
egressIpv4L3Qos(261) indicates that TCAM space is allocated for
Egress IPV4 L3 QOS.
egressIpv6L3Qos(262) indicates that TCAM space is allocated for
Egress IPV6 L3 QOS.
egressL3QosAll(263) indicates that TCAM space is allocated for
Egress L3 QOS ALL.
egressMacSpan(264) indicates that TCAM space is allocated for
Egress MAC SPAN.
egressIpv4Span(265) indicates that TCAM space is allocated for
Egress IPV4 SPAN.
egressIpv6Span(266) indicates that TCAM space is allocated for
Egress IPV6 SPAN.
egressSpanAll(267) indicates that TCAM space is allocated for
Egress SPAN ALL.
dhcp(268) indicates that TCAM space is allocated for DHCP.
labelLblA(269) indicates that TCAM space is allocated for
Label LBL A, Ingress-Physical interface-PACL,PQOS.
labelLblB(270) indicates that TCAM space is allocated for
Label LBL B, Ingress-Logical interface-PACL,PQOS.
labelLblD(271) indicates that TCAM space is allocated for
Label LBL D, Ingress-Physical interface-RACL,L3QOS.
labelLblE(272) indicates that TCAM space is allocated for
Label LBL E, Ingress-Logical interface-RACL,L3QOS.
labelLblF(273) indicates that TCAM space is allocated for
Label LBL F, Egress-Physical interface-RACL,L3QOS.
labelLblG(274) indicates that TCAM space is allocated for
Label LBL G, Egress-Logical interface-RACL,L3QOS.
labelLblH(275) indicates that TCAM space is allocated for
Label LBL H, Ingress-VLAN-VACL,VQOS.
labelLblI(276) indicates that TCAM space is allocated for
Label LBL I, Egress-VLAN-VACL,VQOS.
labelLblK(277) indicates that TCAM space is allocated for
Label LBL K, Ingress-All interface-DHCP.
ingressSupAll(278) indicates that TCAM space is allocated for
Ingress SUP ALL.
egressSupAll(279) indicates that TCAM space is allocated for
Egress SUP ALL.
ingressVlanSpan(280) indicates that TCAM space is allocated for
Ingress Vlan SPAN.
ingressNetflow(281) indicates that TCAM space is allocated for
Ingress Netflow.
ingressCntAcl(282) indicates that TCAM space is allocated for
Ingress CNTACL.
egressCntAcl(283) indicates that TCAM space is allocated for
Egress CNTACL.
ingressHwTelemetry(284) indicates that TCAM space is allocated for
Ingress HW-TELEMETRY.
labelLblAv1(285) indicates that TCAM space is allocated for Label LBL A.
labelLblBv1(286) indicates that TCAM space is allocated for Label LBL B.
labelLblCv1(287) indicates that TCAM space is allocated for Label LBL C.
labelLblDv1(288) indicates that TCAM space is allocated for Label LBL D.
labelLblEv1(289) indicates that TCAM space is allocated for Label LBL E.
labelLblFv1(290) indicates that TCAM space is allocated for Label LBL F.
labelLblGv1(291) indicates that TCAM space is allocated for Label LBL G.
labelLblHv1(292) indicates that TCAM space is allocated for Label LBL H.
labelLblIv1(293) indicates that TCAM space is allocated for Label LBL I.
labelLblJv1(294) indicates that TCAM space is allocated for Label LBL J.
labelLblKv1(295) indicates that TCAM space is allocated for Label LBL K.
labelLblLv1(296) indicates that TCAM space is allocated for Label LBL L.
labelLblMv1(297) indicates that TCAM space is allocated for Label LBL M.
labelLblNv1(298) indicates that TCAM space is allocated for Label LBL N.
labelLblOv1(299) indicates that TCAM space is allocated for Label LBL O.
labelLblPv1(300) indicates that TCAM space is allocated for Label LBL P.
labelLblQv1(301) indicates that TCAM space is allocated for Label LBL Q.
labelLblRv1(302) indicates that TCAM space is allocated for Label LBL R.
ingressNetflowAnalytics(303) indicates that TCAM space is allocated for
Ingress Netflow/Analytics.
ingressNatOutside(304) indicates that TCAM space is allocated for Ingress
NAT OUTSIDE.
ingressNatInside(305) indicates that TCAM space is allocated for Ingress
NAT INSIDE.
ingressL2L3QosAll(306) indicates that TCAM space is allocated for
Ingress L2 L3 QOS ALL.
natRewriteTable(307) indicates that TCAM space is allocated for NAT
Rewrite Table.
tcpAwareNat(308) indicates that TCAM space is allocated for TCP
Aware NAT."
::= { cseTcamUsageEntry 1 }
cseTcamResourceDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The short description of the resource type."
::= { cseTcamUsageEntry 2 }
cseTcamResourceUsed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of TCAM resource has been used up for this resource
type."
::= { cseTcamUsageEntry 3 }
cseTcamResourceTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of TCAM resource is allocated for this
resource type."
::= { cseTcamUsageEntry 4 }
-- cseMet group
--
--
-- The cseMetUsageTable
cseMetUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CseMetUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the resource usage of MET (Multicast
Expansion Table) in the device."
::= { cseMet 1 }
cseMetUsageEntry OBJECT-TYPE
SYNTAX CseMetUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the total number of entries in each MET,
the number of free entries in unallocated as well as
allocated space of the MET. Each row represents MET data
maintained by each module (identified by its entPhysicalIndex)
which is capable of this feature."
INDEX {
entPhysicalIndex,
cseMetIndex
}
::= { cseMetUsageTable 1 }
CseMetUsageEntry ::= SEQUENCE {
cseMetIndex Unsigned32,
cseMetTotalEntries Unsigned32,
cseMetUnallocatedSpcFreeEntries Unsigned32,
cseMetAllocatedSpcFreeEntries Unsigned32
}
cseMetIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value uniquely identifies a MET in a module."
::= { cseMetUsageEntry 1 }
cseMetTotalEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in this MET."
::= { cseMetUsageEntry 2 }
cseMetUnallocatedSpcFreeEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of free entries reside in unallocated
space of this MET."
::= { cseMetUsageEntry 3 }
cseMetAllocatedSpcFreeEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of free entries reside in allocated
space of this MET."
::= { cseMetUsageEntry 4 }
-- Notifications
cseMIBNotifications OBJECT IDENTIFIER
::= { ciscoSwitchEngineMIB 2 }
-- no notifications defined
--
-- Conformance
cseMIBConformance OBJECT IDENTIFIER
::= { ciscoSwitchEngineMIB 3 }
cseMIBCompliances OBJECT IDENTIFIER
::= { cseMIBConformance 1 }
cseMIBGroups OBJECT IDENTIFIER
::= { cseMIBConformance 2 }
-- compliance statements
cseMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH_ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseMcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP multicast flow cache purging in the system."
::= { cseMIBCompliances 1 }
cseMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH-ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseMcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP multicast flow cache purging in the system."
GROUP cseFlowMgmtOperStatusGroup
DESCRIPTION
"This group is mandatory only for those switches which
support operating status on aging time for flows used
in L3 switching."
::= { cseMIBCompliances 2 }
cseMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH-ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseFlowMgmtOperStatusGroup
DESCRIPTION
"This group is mandatory only for those switches which
support operating status on aging time for flows used
in L3 switching."
GROUP cse4kVlanGroup
DESCRIPTION
"This group must be implemented by the devices which
support the range of VlanIndex between 1024 and 4095"
::= { cseMIBCompliances 3 }
cseMIBCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH-ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseMcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP multicast flow cache purging in the system."
GROUP cseFlowMgmtOperStatusGroup
DESCRIPTION
"This group is mandatory only for those switches which
support operating status on aging time for flows used
in L3 switching."
GROUP cse4kVlanGroup
DESCRIPTION
"This group must be implemented by the devices which
support the range of VlanIndex between 1024 and 4095"
GROUP cseNDEMandatoryGroup
DESCRIPTION
"This group is mandatory for those switched which
support Netflow Data Export"
GROUP cseNDESingleFilterGroup
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is single."
GROUP cseNDEMultipleFiltersGroup
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is multiple."
GROUP cseProtocolFilterGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cseStatisticsGroup2
DESCRIPTION
"Implementation of this group is optional."
OBJECT cseNetflowLSFilterSelection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter."
OBJECT cseNetflowLSFilterStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter"
::= { cseMIBCompliances 4 }
cseMIBCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH-ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroupRev1
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseMcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP multicast flow cache purging in the system."
GROUP cseFlowMgmtOperStatusGroup
DESCRIPTION
"This group is mandatory only for those switches which
support operating status on aging time for flows used
in L3 switching."
GROUP cse4kVlanGroup
DESCRIPTION
"This group must be implemented by the devices which
support the range of VlanIndex between 1024 and 4095"
GROUP cseNDEMandatoryGroup
DESCRIPTION
"This group is mandatory for those switched which
support Netflow Data Export"
GROUP cseNDESingleFilterGroup
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is single."
GROUP cseNDEMultipleFiltersGroup
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is multiple."
GROUP cseProtocolFilterGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cseStatisticsGroup2
DESCRIPTION
"Implementation of this group is optional."
OBJECT cseNetflowLSFilterSelection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter."
OBJECT cseNetflowLSFilterStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter"
::= { cseMIBCompliances 5 }
cseMIBCompliance6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH-ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroupRev1
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseMcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP multicast flow cache purging in the system."
GROUP cseFlowMgmtOperStatusGroup
DESCRIPTION
"This group is mandatory only for those switches which
support operating status on aging time for flows used
in L3 switching."
GROUP cse4kVlanGroup
DESCRIPTION
"This group must be implemented by the devices which
support the range of VlanIndex between 1024 and 4095"
GROUP cseNDEMandatoryGroup
DESCRIPTION
"This group is mandatory for those switched which
support Netflow Data Export"
GROUP cseNDESingleFilterGroupRev1
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is single."
GROUP cseNDEMultipleFiltersGroup
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is multiple."
GROUP cseProtocolFilterGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cseStatisticsGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cseFlowMgmtExtGroup2
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
OBJECT cseNetflowLSFilterSelection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter."
OBJECT cseNetflowLSFilterStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter"
::= { cseMIBCompliances 6 }
cseMIBCompliance7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH-ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroupRev1
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup1
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseMcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP multicast flow cache purging in the system."
GROUP cseFlowMgmtOperStatusGroup
DESCRIPTION
"This group is mandatory only for those switches which
support operating status on aging time for flows used
in L3 switching."
GROUP cse4kVlanGroup
DESCRIPTION
"This group must be implemented by the devices which
support the range of VlanIndex between 1024 and 4095"
GROUP cseNDEMandatoryGroup
DESCRIPTION
"This group is mandatory for those switched which
support Netflow Data Export"
GROUP cseNDESingleFilterGroupRev1
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is single."
GROUP cseNDEMultipleFiltersGroup
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is multiple."
GROUP cseProtocolFilterGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cseStatisticsGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cseFlowMgmtExtGroup2
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastRtrMgmtGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cseFlowMcastMgmtGroup2
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
OBJECT cseNetflowLSFilterSelection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter."
OBJECT cseNetflowLSFilterStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter"
::= { cseMIBCompliances 7 }
cseMIBCompliance8 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for
the CISCO-SWITCH-ENGINE-MIB MIB."
MODULE -- this module
MANDATORY-GROUPS { cseStatisticsGroup }
GROUP cseRouterGroup
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseVlanStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
can provide per-vlan statistics."
GROUP cseFlowMgmtGroupRev1
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastMgmtGroup1
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseUcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP/IPX unicast flow cache purging in the system."
GROUP cseMcastCachePurgeGroup
DESCRIPTION
"This group is mandatory only for those switches which
supports IP multicast flow cache purging in the system."
GROUP cseFlowMgmtOperStatusGroup
DESCRIPTION
"This group is mandatory only for those switches which
support operating status on aging time for flows used
in L3 switching."
GROUP cse4kVlanGroup
DESCRIPTION
"This group must be implemented by the devices which
support the range of VlanIndex between 1024 and 4095"
GROUP cseNDEMandatoryGroup
DESCRIPTION
"This group is mandatory for those switched which
support Netflow Data Export"
GROUP cseNDESingleFilterGroupRev1
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is single."
GROUP cseNDEMultipleFiltersGroup
DESCRIPTION
"This group is mandatory in agents for which the value of
cseNetflowLSFilterSupport is multiple."
GROUP cseProtocolFilterGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cseStatisticsGroup2
DESCRIPTION
"Implementation of this group is optional."
GROUP cseFlowMgmtExtGroup2
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 switching in the system."
GROUP cseFlowMcastRtrMgmtGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP cseFlowMcastMgmtGroup2
DESCRIPTION
"This group is mandatory only for those switches which
support layer 3 IP multicast switching in the system."
GROUP cseCacheStatisticsGroup
DESCRIPTION
"This group is mandatory only for those switches which
support switch engine statistics on flow cache entries
in the system."
GROUP cseL3SwitchedPktsPerSecGroup
DESCRIPTION
"This group is mandatory only for those switches which
support switch engine statistics on total number of
packets switched per second in the system."
GROUP cseStatisticsFlowGroup1
DESCRIPTION
"This group is mandatory only for those switches which
support switch engine statistics on total number of
Ipv4 flow entries."
OBJECT cseNetflowLSFilterSelection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter."
OBJECT cseNetflowLSFilterStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, for systems which
support just one include and one exclude filter"
::= { cseMIBCompliances 8 }
-- units of conformance
cseStatisticsGroup OBJECT-GROUP
OBJECTS {
cseL2ForwardedLocalPkts,
cseL2ForwardedLocalOctets,
cseL2ForwardedTotalPkts,
cseL2NewAddressLearns,
cseL2AddrLearnFailures,
cseL2DstAddrLookupMisses,
cseL3SwitchedTotalPkts,
cseL3SwitchedTotalOctets,
cseL3CandidateFlowHits,
cseL3EstablishedFlowHits,
cseL3ActiveFlows,
cseL3FlowLearnFailures,
cseL3IntFlowInvalids,
cseL3ExtFlowInvalids,
cseL2HCOverflowForwardedLocalPkts,
cseL2HCForwardedLocalPkts,
cseL2HCOverflowForwardedTotalPkts,
cseL2HCForwardedTotalPkts,
cseL2HCOverflowIpPkts,
cseL2HCIpPkts,
cseL2HCOverflowIpxPkts,
cseL2HCIpxPkts,
cseL2HCOverflowAssignedProtoPkts,
cseL2HCAssignedProtoPkts,
cseL2HCOverflowOtherProtoPkts,
cseL2HCOtherProtoPkts
}
STATUS current
DESCRIPTION
"A collection of objects providing switch engine statistics."
::= { cseMIBGroups 1 }
cseStatisticsGroup2 OBJECT-GROUP
OBJECTS {
cseStatsFlowAged,
cseStatsFlowPurged,
cseStatsFlowParityFail,
cseCacheUtilization
}
STATUS current
DESCRIPTION
"A collection of objects providing switch engine statistics
on aged/purged flows, and the cache utilizations."
::= { cseMIBGroups 2 }
cseVlanStatisticsGroup OBJECT-GROUP
OBJECTS {
cseL3VlanInPkts,
cseL3VlanInOctets,
cseL3VlanOutPkts,
cseL3VlanOutOctets
}
STATUS current
DESCRIPTION
"A collection of objects providing per-vlan switch engine
statistics, if supported."
::= { cseMIBGroups 3 }
cseRouterGroup OBJECT-GROUP
OBJECTS {
cseRouterFlowMask,
cseRouterName,
cseRouterStatic,
cseStaticRouterOwner,
cseStaticRouterName,
cseStaticRouterType,
cseStaticRouterStatus,
cseRouterIpxFlowMask,
cseStaticIpxRouterOwner,
cseStaticIpxRouterName,
cseStaticIpxRouterStatus,
cseRouterMac,
cseRouterProtocol
}
STATUS current
DESCRIPTION
"A collection of objects providing information on routers which
are used to support layer 3 switching in the system."
::= { cseMIBGroups 4 }
cseFlowMgmtGroup OBJECT-GROUP
OBJECTS {
cseFlowEstablishedAgingTime,
cseFlowFastAgingTime,
cseFlowFastAgePktThreshold,
cseFlowIPXEstablishedAgingTime,
cseFlowMaxQueries,
cseFlowQueryMask,
cseFlowQueryTransport,
cseFlowQuerySource,
cseFlowQuerySourceMask,
cseFlowQueryDestination,
cseFlowQueryDestinationMask,
cseFlowQueryRouterIndex,
cseFlowQueryOwner,
cseFlowQueryResultingRows,
cseFlowQueryResultTotalPkts,
cseFlowQueryResultTotalOctets,
cseFlowQueryResultAvgDuration,
cseFlowQueryResultAvgIdle,
cseFlowQueryStatus,
cseFlowQueryCreateTime,
cseFlowDataSrcMac,
cseFlowDataDstMac,
cseFlowDataEncapType,
cseFlowDataSource,
cseFlowDataStaticFlow,
cseFlowDataDestination,
cseFlowDataDestVlan,
cseFlowDataIpQOS,
cseFlowDataIpQOSPolicy,
cseFlowDataWhenCreated,
cseFlowDataLastUsed,
cseFlowDataPkts,
cseFlowDataOctets,
cseFlowSwitchStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing information for determining the
L3 flow switching performance in the switching engine. There may
be some platform specific limitations when performing a SET
on some of these objects.
The following are valid for Catalyst 5000 platforms:
- cseFlowEstablishedAgingTime has a default value of 256.
- cseFlowFastAgePktThreshold can only be set to 1, 3, 7, 15, 31
or 63 packets. If the packet threshold is not configured to one
of these values, it will be adjusted to the closest value.
- cseFlowFastAgingTime can be set to only values that are
multiples of 8 in the range (0..128).
If it is set to a value that is not
multiple of 8, then the closest value that is a multiple of 8
will take effect. The default value for fast aging time is 32
seconds. (i.e. less than cseFlowFastAgePktThreshold number of
packets were switched within 32 seconds after the an L3
flow entry was established).
- cseFlowIPXEstablishedAgingTime has a default value of 256.
cseFlowMgmtGroup object is superseded by cseFlowMgmtGroupRev1."
::= { cseMIBGroups 5 }
cseNetflowLSGroup OBJECT-GROUP
OBJECTS {
cseNetflowLSExportHost,
cseNetflowLSExportTransportNumber,
cseNetflowLSExportStatus,
cseNetflowLSExportDataSource,
cseNetflowLSExportDataSourceMask,
cseNetflowLSExportDataDest,
cseNetflowLSExportDataDestMask,
cseNetflowLSExportDataProtocol,
cseNetflowLSExportDataFilterSelection,
cseNetflowLSExportNDEVersionNumber
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing information on the Netflow LAN
switching Data Export feature, if supported.
cseNetflowLSGroup object is superseded by cseNDESingleFilterGroupRev1."
::= { cseMIBGroups 6 }
cseProtocolFilterGroup OBJECT-GROUP
OBJECTS {
cseProtocolFilterPortAdminStatus,
cseProtocolFilterPortOperStatus,
cseL2IpPkts,
cseL2IpxPkts,
cseL2AssignedProtoPkts,
cseL2OtherProtoPkts
}
STATUS current
DESCRIPTION
"A collection of objects providing information on the Protocol
filter feature, if supported."
::= { cseMIBGroups 7 }
cseFlowMcastMgmtGroup OBJECT-GROUP
OBJECTS {
cseFlowMcastMaxQueries,
cseFlowMcastQueryMask,
cseFlowMcastQuerySrc,
cseFlowMcastQueryGrp,
cseFlowMcastQuerySrcVlan,
cseFlowMcastQueryRtrIndex,
cseFlowMcastQuerySkipNFlows,
cseFlowMcastQueryOwner,
cseFlowMcastQueryTotalFlows,
cseFlowMcastQueryRows,
cseFlowMcastQueryStatus,
cseFlowMcastQueryCreateTime,
cseFlowMcastResultSrc,
cseFlowMcastResultGrp,
cseFlowMcastResultSrcVlan,
cseFlowMcastResultRtrIp,
cseFlowMcastResultRtrMac,
cseFlowMcastResultCreatedTS,
cseFlowMcastResultLastUsedTS,
cseFlowMcastResultPkts,
cseFlowMcastResultOctets,
cseFlowMcastResultDstVlans,
cseFlowMcastSwitchStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects for querying IP multicast flows
stored in hardware switching cache.
cseFlowMcastMgmtGroup object is superseded by cseFlowMcastMgmtGroup1."
::= { cseMIBGroups 8 }
cseUcastCachePurgeGroup OBJECT-GROUP
OBJECTS {
cseUcastCacheFlowType,
cseUcastCacheTransport,
cseUcastCacheDest,
cseUcastCacheDestMask,
cseUcastCacheSource,
cseUcastCacheSrcMask,
cseUcastCacheRtrIp,
cseUcastCacheOwner,
cseUcastCacheStatus,
cseUcastCacheResult
}
STATUS current
DESCRIPTION
"A collection of objects providing IP/IPX unicast flow cache
purging function."
::= { cseMIBGroups 9 }
cseMcastCachePurgeGroup OBJECT-GROUP
OBJECTS {
cseMcastCacheFlowType,
cseMcastCacheGrp,
cseMcastCacheSrc,
cseMcastCacheRtrIp,
cseMcastCacheOwner,
cseMcastCacheStatus,
cseMcastCacheResult
}
STATUS current
DESCRIPTION
"A collection of objects providing IP multicast flow cache purge
function."
::= { cseMIBGroups 10 }
cseFlowMgmtOperStatusGroup OBJECT-GROUP
OBJECTS {
cseFlowOperEstablishedAgingTime,
cseFlowOperFastAgingTime,
cseFlowOperFastAgePktThreshold,
cseFlowOperIPXAgingTime
}
STATUS current
DESCRIPTION
"A collection of objects providing operating status information
on aging time for flows used in L3 switching."
::= { cseMIBGroups 11 }
cse4kVlanGroup OBJECT-GROUP
OBJECTS {
cseFlowMcastResultDstVlans2k,
cseFlowMcastResultDstVlans3k,
cseFlowMcastResultDstVlans4k
}
STATUS current
DESCRIPTION
"A collection of objects providing information
for VLANS with VlanIndex from 1024 to 4095."
::= { cseMIBGroups 12 }
cseNDEMandatoryGroup OBJECT-GROUP
OBJECTS {
cseNetflowLSFilterSupport,
cseNetflowLSExportStatus,
cseNetflowLSExportNDEVersionNumber
}
STATUS current
DESCRIPTION
"A collection of objects providing information on the type
of filter support, status and the version of NDE used."
::= { cseMIBGroups 13 }
cseNDESingleFilterGroup OBJECT-GROUP
OBJECTS {
cseNetflowLSExportHost,
cseNetflowLSExportTransportNumber,
cseNetflowLSExportDataSource,
cseNetflowLSExportDataSourceMask,
cseNetflowLSExportDataDest,
cseNetflowLSExportDataDestMask,
cseNetflowLSExportDataProtocol,
cseNetflowLSExportDataFilterSelection
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing information on the Netflow LAN
switching Data Export feature, with a single host and a
single filter support.
cseNDESingleFilterGroup object is superseded by cseNDESingleFilterGroupRev1."
::= { cseMIBGroups 14 }
cseNDEMultipleFiltersGroup OBJECT-GROUP
OBJECTS {
cseNetflowLSFilterDataSource,
cseNetflowLSFilterDataSourceMask,
cseNetflowLSFilterDataDest,
cseNetflowLSFilterDataDestMask,
cseNetflowLSFilterDataProtocol,
cseNetflowLSFilterSelection,
cseNetflowLSFilterStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information on the Netflow LAN
switching Data Export feature, with multiple filter support."
::= { cseMIBGroups 15 }
cseFlowMgmtGroupRev1 OBJECT-GROUP
OBJECTS {
cseFlowEstablishedAgingTime,
cseFlowFastAgingTime,
cseFlowFastAgePktThreshold,
cseFlowIPXEstablishedAgingTime,
cseFlowMaxQueries,
cseFlowQueryMask,
cseFlowQueryTransport,
cseFlowQuerySource,
cseFlowQuerySourceMask,
cseFlowQueryDestination,
cseFlowQueryDestinationMask,
cseFlowQueryRouterIndex,
cseFlowQueryOwner,
cseFlowQueryResultingRows,
cseFlowQueryResultTotalPkts,
cseFlowQueryResultTotalOctets,
cseFlowQueryResultAvgDuration,
cseFlowQueryResultAvgIdle,
cseFlowQueryStatus,
cseFlowQueryCreateTime,
cseFlowQueryTotalFlows,
cseFlowDataSrcMac,
cseFlowDataDstMac,
cseFlowDataEncapType,
cseFlowDataSource,
cseFlowDataStaticFlow,
cseFlowDataDestination,
cseFlowDataDestVlan,
cseFlowDataIpQOS,
cseFlowDataIpQOSPolicy,
cseFlowDataWhenCreated,
cseFlowDataLastUsed,
cseFlowDataPkts,
cseFlowDataOctets,
cseFlowSwitchStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information for determining the
L3 flow switching performance in the switching engine. There may
be some platform specific limitations when performing a SET
on some of these objects.
The following are valid for Catalyst 5000 platforms:
- cseFlowEstablishedAgingTime has a default value of 256.
- cseFlowFastAgePktThreshold can only be set to 1, 3, 7, 15, 31
or 63 packets. If the packet threshold is not configured to one
of these values, it will be adjusted to the closest value.
- cseFlowFastAgingTime can be set to only values that are
multiples of 8 in the range (0..128).
If it is set to a value that is not
multiple of 8, then the closest value that is a multiple of 8
will take effect. The default value for fast aging time is 32
seconds. (i.e. less than cseFlowFastAgePktThreshold number of
packets were switched within 32 seconds after the an L3
flow entry was established).
- cseFlowIPXEstablishedAgingTime has a default value of 256."
::= { cseMIBGroups 16 }
cseL3ErrorsGroup OBJECT-GROUP
OBJECTS {
cseIpPlenErrors,
cseIpTooShortErrors,
cseIpCheckSumErrors,
cseIpxPlenErrors,
cseIpxTooShortErrors
}
STATUS current
DESCRIPTION
"A collection of objects providing the IP and IPX error
statistics."
::= { cseMIBGroups 17 }
cseBridgedFlowGroup OBJECT-GROUP
OBJECTS { cseFlowBridgedFlowStatsEnable }
STATUS current
DESCRIPTION
"A collection of objects control the reporting of intra-vlan
bridged flow statistics."
::= { cseMIBGroups 18 }
cseVlanStatisticsExtGroup OBJECT-GROUP
OBJECTS {
cseL3VlanInUnicastPkts,
cseL3VlanInUnicastOctets,
cseL3VlanOutUnicastPkts,
cseL3VlanOutUnicastOctets
}
STATUS current
DESCRIPTION
"A collection of objects providing additional per-vlan switch
engine statistics, if supported."
::= { cseMIBGroups 19 }
cseProtocolFilterExtGroup OBJECT-GROUP
OBJECTS { cseProtocolFilterEnable }
STATUS current
DESCRIPTION
"A collection of objects providing additional information on the
Protocol filter feature, if supported."
::= { cseMIBGroups 20 }
cseFlowMgmtExtGroup OBJECT-GROUP
OBJECTS {
cseFlowIPFlowMask,
cseFlowIPXFlowMask
}
STATUS current
DESCRIPTION
"A collection of objects providing additional information on the
L3 flow switching in the switching engine."
::= { cseMIBGroups 21 }
cseFlowMgmtExtGroup1 OBJECT-GROUP
OBJECTS {
cseFlowLongAgingTime,
cseFlowExcludeProtocol,
cseFlowExcludeStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing additional information on the
L3 flow switching in the switching engine."
::= { cseMIBGroups 22 }
cseNDEReportGroup OBJECT-GROUP
OBJECTS { cseNetFlowIfIndexEnable }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration
on NDE ifIndex report feature."
::= { cseMIBGroups 23 }
cseStatisticsFlowGroup OBJECT-GROUP
OBJECTS { cseFlowTotalFlows }
STATUS current
DESCRIPTION
"A collection of object providing switch engine statistics
on total number of installed flows."
::= { cseMIBGroups 24 }
cseFlowMgmtExtGroup2 OBJECT-GROUP
OBJECTS { cseFlowQuerySkipNFlows }
STATUS current
DESCRIPTION
"A collection of objects providing additional information on the
L3 flow switching in the switching engine."
::= { cseMIBGroups 25 }
cseNDESingleFilterGroupRev1 OBJECT-GROUP
OBJECTS {
cseNetflowLSExportDataSource,
cseNetflowLSExportDataSourceMask,
cseNetflowLSExportDataDest,
cseNetflowLSExportDataDestMask,
cseNetflowLSExportDataProtocol,
cseNetflowLSExportDataFilterSelection
}
STATUS current
DESCRIPTION
"A collection of objects providing information on the Netflow LAN
switching Data Export feature, with a single filter support."
::= { cseMIBGroups 26 }
cseCefFibAdjacencyGroup OBJECT-GROUP
OBJECTS {
cseCefFibAddrType,
cseCefFibDestIp,
cseCefFibDestIpMask,
cseCefFibType,
cseCefAdjacencyAddrType,
cseCefAdjacencyNextHopIp,
cseCefAdjacencyNextHopMac,
cseCefAdjacencyNextHopIfIndex,
cseCefAdjacencyType,
cseCefAdjacencyPkts,
cseCefAdjacencyOctets
}
STATUS current
DESCRIPTION
"A collection of objects providing FIB and adjacency
information available in the device."
::= { cseMIBGroups 27 }
cseCefAdjacencyEncapGroup OBJECT-GROUP
OBJECTS { cseCefAdjacencyEncap }
STATUS current
DESCRIPTION
"A collection of object providing adjacency next hop
encapsulation information available in the device."
::= { cseMIBGroups 28 }
cseCefAdjacencyMTUGroup OBJECT-GROUP
OBJECTS { cseCefAdjacencyMTU }
STATUS current
DESCRIPTION
"A collection of object providing adjacency next hop
MTU information available in the device."
::= { cseMIBGroups 29 }
cseTcamUsageGroup OBJECT-GROUP
OBJECTS {
cseTcamResourceDescr,
cseTcamResourceUsed,
cseTcamResourceTotal
}
STATUS current
DESCRIPTION
"A collection of objects providing the resource usage
information on TCAM available in the device."
::= { cseMIBGroups 30 }
cseL3ErrorsLCGroup OBJECT-GROUP
OBJECTS {
cseLCIpPlenErrors,
cseLCIpTooShortErrors,
cseLCIpCheckSumErrors,
cseLCIpxPlenErrors,
cseLCIpxTooShortErrors
}
STATUS current
DESCRIPTION
"A collection of objects providing the IP and IPX error
statistics."
::= { cseMIBGroups 31 }
cseNetflowASInfoExportGroup OBJECT-GROUP
OBJECTS { cseNetflowASInfoExportCtrl }
STATUS current
DESCRIPTION
"A collection of object providing AS number information
export control."
::= { cseMIBGroups 32 }
cseNetflowPerVlanIfGroup OBJECT-GROUP
OBJECTS {
cseNetflowPerVlanIfGlobalEnable,
cseNetflowPerVlanIfEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing control of netflow entry
creation per vlan."
::= { cseMIBGroups 33 }
cseMetUsageGroup OBJECT-GROUP
OBJECTS {
cseMetTotalEntries,
cseMetUnallocatedSpcFreeEntries,
cseMetAllocatedSpcFreeEntries
}
STATUS current
DESCRIPTION
"A collection of objects providing MET utilization
information."
::= { cseMIBGroups 34 }
cseFlowMcastMgmtGroup1 OBJECT-GROUP
OBJECTS {
cseFlowMcastMaxQueries,
cseFlowMcastQueryMask,
cseFlowMcastQuerySrcVlan,
cseFlowMcastQuerySkipNFlows,
cseFlowMcastQueryOwner,
cseFlowMcastQueryTotalFlows,
cseFlowMcastQueryRows,
cseFlowMcastQueryStatus,
cseFlowMcastQueryCreateTime,
cseFlowMcastResultSrcVlan,
cseFlowMcastResultCreatedTS,
cseFlowMcastResultLastUsedTS,
cseFlowMcastResultPkts,
cseFlowMcastResultOctets,
cseFlowMcastResultDstVlans,
cseFlowMcastSwitchStatus
}
STATUS current
DESCRIPTION
"A collection of objects for querying IP multicast flows
stored in hardware switching cache."
::= { cseMIBGroups 35 }
cseFlowMcastRtrMgmtGroup OBJECT-GROUP
OBJECTS {
cseFlowMcastQueryRtrIndex,
cseFlowMcastResultRtrIp,
cseFlowMcastResultRtrMac
}
STATUS current
DESCRIPTION
"A collection of objects for specifying the router based
information while IP multicast flows stored in the hardware
switching cache are queried."
::= { cseMIBGroups 36 }
cseFlowMcastMgmtGroup2 OBJECT-GROUP
OBJECTS {
cseFlowMcastQueryMvrf,
cseFlowMcastQueryAddrType,
cseFlowMcastQuerySource,
cseFlowMcastQueryGroup,
cseFlowMcastResultMvrf,
cseFlowMcastResultAddrType,
cseFlowMcastResultGroup,
cseFlowMcastResultSource,
cseFlowMcastResultFlowType,
cseFlowMcastResultHFlag1k2k,
cseFlowMcastResultHFlag3k4k
}
STATUS current
DESCRIPTION
"A collection of objects for enhanced querying of
IP multicast flows stored in hardware switching cache."
::= { cseMIBGroups 37 }
cseCacheStatisticsGroup OBJECT-GROUP
OBJECTS {
cseCacheEntriesCreated,
cseCacheEntriesFailed
}
STATUS current
DESCRIPTION
"A collection of objects providing switch engine statistics
on the flow cache entries."
::= { cseMIBGroups 38 }
cseL3SwitchedPktsPerSecGroup OBJECT-GROUP
OBJECTS {
cseL3SwitchedPktsPerSec,
cseL3SwitchedAggrPktsPerSec
}
STATUS current
DESCRIPTION
"A collection of objects providing switch engine
statistics on total number of packets switched per
second."
::= { cseMIBGroups 39 }
cseStatisticsFlowGroup1 OBJECT-GROUP
OBJECTS { cseFlowTotalIpv4Flows }
STATUS current
DESCRIPTION
"A collection of object providing switch engine statistics
on total number of Ipv4 flow entries."
::= { cseMIBGroups 40 }
END
Reference in New Issue Copy Permalink