mibs/MIBS/cisco/CISCO-VOICE-COMMON-DIAL-CONTROL-MIB

782 lines
29 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-VOICE-COMMON-DIAL-CONTROL-MIB.my:
-- Voice Common Dial Control MIB file
--
-- June 1999, Chris White
--
-- Copyright (c) 1999, 2001, 2003, 2005-2010 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
callActiveSetupTime,
callActiveIndex
FROM DIAL-CONTROL-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
cCallHistoryIndex
FROM CISCO-DIAL-CONTROL-MIB
ciscoExperiment
FROM CISCO-SMI;
ciscoVoiceCommonDialControlMIB MODULE-IDENTITY
LAST-UPDATED "201006300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-voice@cisco.com"
DESCRIPTION
"This MIB module contains voice related objects that
are common across more than one network
encapsulation i.e VoIP, VoATM and VoFR.
*** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
GSM - Global System for Mobile Communication
AMR-NB - Adaptive Multi Rate - Narrow Band
iLBC - internet Low Bitrate Codec
iSAC - internet Speech Audio Codec"
REVISION "201006300000Z"
DESCRIPTION
"Added CvcCallReferenceIdOrZero textual convention.
Added aaclc and aacld enum to CvcCoderTypeRate and
CvcSpeechCoderRate textual conventions."
REVISION "200903180000Z"
DESCRIPTION
"[1] Added acronym for iSAC codec
[2] Added iSAC enum to CvcSpeechCoderRate and CvcCoderTypeRate
textual conventions."
REVISION "200807020000Z"
DESCRIPTION
"[1] Added '-- obsolete' to description of 'g722'
enum from CvcCoderTypeRate.
[2] Added new enum values 'g722r4800', 'g722r5600'
and 'g722r6400' to CvcCoderTypeRate.
[3] Added new enum values 'g722r4800', 'g722r5600'
and 'g722r6400' to CvcSpeechCoderRate."
REVISION "200706260000Z"
DESCRIPTION
"[1] Imported TEXTUAL-CONVENTION from SNMPv2-TC.
[2] Added acronyms for GSM AMR-NB and iLBC codecs
[3] Added llcc, gsmAmrNb, iLBC, iLBCr15200 and iLBCr13330
enums to CvcSpeechCoderRate textual conventions.
[4] Added llcc, gsmAmrNb, g722, iLBC, iLBCr15200 and iLBCr13330
enums to CvcCoderTypeRate textual conventions.
[5] Added REFERENCE clause to CvcSpeechCoderRate and
CvcCoderTypeRate textual conventions for GSM AMR-NB and
iLBC codecs."
REVISION "200508160000Z"
DESCRIPTION
"Added CvcH320CallType and CvcVideoCoderRate objects.
Added g722 enum to CvcCoderTypeRate textual conventions."
REVISION "200503060000Z"
DESCRIPTION
"Added gsmAmrNb enum to CvcSpeechCoderRate and CvcCoderTypeRate
textual conventions."
REVISION "200303110000Z"
DESCRIPTION
"Added new enum value 'llcc', to CvcSpeechCoderRate
and CvcCoderTypeRate textual-conventions."
REVISION "200110060000Z"
DESCRIPTION
"[1] Added new enum value 'g726r40000',to CvcSpeechCoderRate's
and CvcCoderTypeRate's textual-conventions.
[2] Replaced 'clearch' enum with 'clearChannel' enum.
[3] Replaced 'codec is disabled' comment for clearChannel enum
with 'CLEAR channel codec'."
REVISION "200109050000Z"
DESCRIPTION
"[1] Added new enum value, 'clearch,' to CvcSpeechCoderRate's
and CvcCoderTypeRate's textual-conventions.
[2] Added new enum value, 'gr303,' to CvcInBandSignaling's
textual-conventions
[3] Modified cvCommonDcCallActiveInBandSignaling's and
cvCommonDcCallHistoryInBandSignaling's description
to indicate value is valid only for Connection Trunk calls."
REVISION "200007220000Z"
DESCRIPTION
"Add new objects for handling the following features:
[1] Calling Name display for call active and history table.
[2] Caller ID Block, which indicates whether the Caller ID
feature is in using, for call active and history table."
::= { ciscoExperiment 55 }
-- Voice Common Dial Control MIB objects definitions
cvCommonDcMIBObjects OBJECT IDENTIFIER
::= { ciscoVoiceCommonDialControlMIB 1 }
-- The Voice Common Dial Control MIB consists of the following groups
-- [1] Voice Common Call Active Group (cvCommonDcCallActive)
-- [2] Voice Common Call History Group (cvCommonDcCallHistory)
cvCommonDcCallActive OBJECT IDENTIFIER
::= { cvCommonDcMIBObjects 1 }
cvCommonDcCallHistory OBJECT IDENTIFIER
::= { cvCommonDcMIBObjects 2 }
-- Textual Conventions
--
--
-- Speech Coder Rate Textual Conventions
CvcSpeechCoderRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object specifies the most desirable codec of
speech for the VoIP, VoATM or VoFR peer.
g729r8000 - pre-IETF G.729 8000 bps
g729Ar8000 - G.729 ANNEX-A 8000 bps
g726r16000 - G.726 16000 bps
g726r24000 - G.726 24000 bps
g726r32000 - G.726 32000 bps
g711ulawr64000 - G.711 u-Law 64000 bps
g711Alawr64000 - G.711 A-Law 64000 bps
g728r16000 - G.728 16000 bps
g723r6300 - G.723.1 6300 bps
g723r5300 - G.723.1 5300 bps
gsmr13200 - GSM Full rate 13200 bps
g729Br8000 - G.729 ANNEX-B 8000 bps
g729ABr8000 - G.729 ANNEX-A & B 8000 bps
g723Ar6300 - G723.1 Annex A 6300 bps
g723Ar5300 - G723.1 Annex A 5300 bps
g729IETFr8000 - IETF G.729 8000 bps
gsmeEr12200 - GSM Enhanced Full Rate 12200 bps
clearChannel - CLEAR Channel codec
g726r40000 - G.726 40000 bps
llcc - Lossless compression codec
gsmAmrNb - GSM AMR-NB 4750 - 12200 bps
iLBC - iILBC 13330 or 15200 bps
iLBCr15200 - iLBC 15200 bps
iLBCr13330 - iLBC 13330 bps
g722r4800 - G.722 (modes 1, 2, 3)
g722r5600 - G.722 (modes 1, 2)
g722r6400 - G.722 (mode 1)
iSAC - iSAC (10 to 32 kbps)
aaclc - AAC-LC Advanced Audio Coding Low Complexity
aacld - AAC-LD MPEG-4 Low Delay Audio Coder"
REFERENCE
"[1] RFC 3267: For introduction about GSM AMR-NB codec,
section 3.1
[2] RFC 3952: For introduction about iLBC codec,
section 2"
SYNTAX INTEGER {
g729r8000(1),
g729Ar8000(2),
g726r16000(3),
g726r24000(4),
g726r32000(5),
g711ulawr64000(6),
g711Alawr64000(7),
g728r16000(8),
g723r6300(9),
g723r5300(10),
gsmr13200(11),
g729Br8000(12),
g729ABr8000(13),
g723Ar6300(14),
g723Ar5300(15),
g729IETFr8000(16),
gsmeEr12200(17),
clearChannel(18),
g726r40000(19),
llcc(20),
gsmAmrNb(21),
iLBC(22),
iLBCr15200(23),
iLBCr13330(24),
g722r4800(25),
g722r5600(26),
g722r6400(27),
iSAC(28),
aaclc(29),
aacld(30)
}
-- Fax Transmit Rate Textual Convention
CvcFaxTransmitRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object specifies the default transmit rate of FAX
for the VoIP, VoATM or VOFR peer. If the value of this
object is 'none', then the Fax relay feature is disabled
; otherwise the Fax relay feature is enabled.
none - Fax relay is disabled.
voiceRate - the fastest possible fax rate not exceed
the configured voice rate.
fax2400 - 2400 bps FAX transmit rate.
fax4800 - 4800 bps FAX transmit rate.
fax7200 - 7200 bps FAX transmit rate.
fax9600 - 9600 bps FAX transmit rate.
fax14400 - 14400 bps FAX transmit rate.
fax12000 - 12000 bps FAX transmit rate."
SYNTAX INTEGER {
none(1),
voiceRate(2),
fax2400(3),
fax4800(4),
fax7200(5),
fax9600(6),
fax14400(7),
fax12000(8)
}
-- Voice/FAX Call Coder Type-Rate textual convention
CvcCoderTypeRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the coder type-rate for voice/fax compression
used during a call.
*** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
GSM - Global System for Mobile Communication
AMR-NB - Adaptive Multi Rate - Narrow Band
iLBC - internet Low Bitrate Codec
iSAC - internet Speech Audio Codec
other - none of the following.
fax2400 - FAX 2400 bps
fax4800 - FAX 4800 bps
fax7200 - FAX 7200 bps
fax9600 - FAX 9600 bps
fax14400 - FAX 14400 bps
fax12000 - FAX 12000 bps
g729r8000 - G.729 8000 bps (pre-IETF bit ordering)
g729Ar8000 - G.729 ANNEX-A 8000 bps
g726r16000 - G.726 16000 bps
g726r24000 - G.726 24000 bps
g726r32000 - G.726 32000 bps
g711ulawr64000 - G.711 u-Law 64000 bps
g711Alawr64000 - G.711 A-Law 64000 bps
g728r16000 - G.728 16000 bps
g723r6300 - G.723.1 6300 bps
g723r5300 - G.723.1 5300 bps
gsmr13200 - GSM full rate 13200 bps
g729Br8000 - G.729 ANNEX-B 8000 bps
g729ABr8000 - G.729 ANNEX-A & B 8000 bps
g723Ar6300 - G723.1 Annex A 6300 bps
g723Ar5300 - G723.1 Annex A 5300 bps
ietfg729r8000 - G.729 8000 bps (IETF bit ordering)
gsmeEr12200 - GSM Enhanced Full Rate 12200 bps
clearChannel - CLEAR channel codec
g726r40000 - G.726 40000 bps
llcc - Lossless compression codec
gsmAmrNb - GSM AMR-NB 4750 - 12200 bps
g722 - G.722 2400 - 6400 bps
iLBC - iILBC 13330 or 15200 bps
iLBCr15200 - iLBC 15200 bps
iLBCr13330 - iLBC 13330 bps
g722r4800 - G.722 (modes 1, 2, 3)
g722r5600 - G.722 (modes 1, 2)
g722r6400 - G.722 (mode 1)
iSAC - iSAC (10 to 32 kbps)
aaclc - AAC-LC Advanced Audio Coding Low Complexity
aacld - AAC-LD MPEG-4 Low Delay Audio Coder"
REFERENCE
"[1] RFC 3267: For introduction about GSM AMR-NB codec,
section 3.1
[2] RFC 3952: For introduction about iLBC codec,
section 2"
SYNTAX INTEGER {
other(1),
fax2400(2),
fax4800(3),
fax7200(4),
fax9600(5),
fax14400(6),
fax12000(7),
g729r8000(10),
g729Ar8000(11),
g726r16000(12),
g726r24000(13),
g726r32000(14),
g711ulawr64000(15),
g711Alawr64000(16),
g728r16000(17),
g723r6300(18),
g723r5300(19),
gsmr13200(20),
g729Br8000(21),
g729ABr8000(22),
g723Ar6300(23),
g723Ar5300(24),
ietfg729r8000(25),
gsmeEr12200(26),
clearChannel(27),
g726r40000(28),
llcc(29),
gsmAmrNb(30),
g722(31),
iLBC(32),
iLBCr15200(33),
iLBCr13330(34),
g722r4800(35),
g722r5600(36),
g722r6400(37),
iSAC(38),
aaclc(39),
aacld(40)
}
-- Global Call Identifier textual convention
CvcGUid ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a Global Call Identifier.
The global call identifier is used as an unique identifier
for an end-to-end call.
A zero length CvcGUid indicates no value for the global call
identifier."
SYNTAX OCTET STRING (SIZE (0..16))
-- InBand Signaling textual conventions
CvcInBandSignaling ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the type of in-band signaling used between
the two end points of the call and is used to inform the
router how interpret the ABCD signaling data bits passed
as part of the voice payload data.
cas - specifies interpret the signaling bits as
North American Channel Associated signaling.
none - specifies no in-band signaling or signaling
is being done via an external method (e.g
CCS).
cept - specifies interpret the signaling bits as
MELCAS
transparent - specifies do not interpret or translate the
signaling bits.
gr303 - specifies interpret the signaling bits as
GR303"
SYNTAX INTEGER {
cas(1),
none(2),
cept(3),
transparent(4),
gr303(5)
}
-- Call Reference Identifier textual convention
CvcCallReferenceIdOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A call reference ID correlates the video and audio call entries
that belong to the same endpoint. In other words, if an audio
call entry and a video call entry have the same call reference
ID, these entries belong to the same endpoint.
Because an audio-only endpoint creates only one call entry, call
reference ID is not necessary and is set to zero.
A call reference ID with value greater than zero signifies a
video call, the value zero is object-specific and must therefore
be defined as part of the description of any object which uses
this syntax. Examples of the usage of zero include audio calls."
SYNTAX Unsigned32
-- Voice Call H.320 Call Type textual convention
CvcH320CallType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object specifies the H320 call type of a voice call."
SYNTAX INTEGER {
none(0), -- none of the following
primary(1), -- h320 primary call
secondary(2) -- h320 secondary call
}
-- Voice Call Coder Type-Rate textual convention
CvcVideoCoderRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object specifies the encoding type used to compress
the video data of the voice call."
SYNTAX INTEGER {
none(0), -- none of the following
h261(1),
h263(2),
h263plus(3),
h264(4)
}
-- **********************************************************************
-- Voice Common Call Active Group
-- **********************************************************************
--
-- Voice Common Call Active Table
cvCommonDcCallActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCommonDcCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a common extension to the call active
table of IETF Dial Control MIB. It contains common call
leg information about a network call leg."
::= { cvCommonDcCallActive 1 }
cvCommonDcCallActiveEntry OBJECT-TYPE
SYNTAX CvCommonDcCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The common information regarding a single network call
leg. The call leg entry is identified by using the same
index objects that are used by Call Active table of IETF
Dial Control MIB to identify the call.
An entry of this table is created when its associated
call active entry in the IETF Dial Control MIB is created
and the call active entry contains information for the
call establishment to a network dialpeer.
The entry is deleted when its associated call active entry
in the IETF Dial Control MIB is deleted."
INDEX {
callActiveSetupTime,
callActiveIndex
}
::= { cvCommonDcCallActiveTable 1 }
CvCommonDcCallActiveEntry ::= SEQUENCE {
cvCommonDcCallActiveConnectionId CvcGUid,
cvCommonDcCallActiveVADEnable TruthValue,
cvCommonDcCallActiveCoderTypeRate CvcCoderTypeRate,
cvCommonDcCallActiveCodecBytes INTEGER,
cvCommonDcCallActiveInBandSignaling CvcInBandSignaling,
cvCommonDcCallActiveCallingName SnmpAdminString,
cvCommonDcCallActiveCallerIDBlock TruthValue
}
cvCommonDcCallActiveConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier for the network call."
::= { cvCommonDcCallActiveEntry 1 }
cvCommonDcCallActiveVADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the VAD (Voice
Activity Detection) is enabled for the voice call."
::= { cvCommonDcCallActiveEntry 2 }
cvCommonDcCallActiveCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit
rate of voice/fax compression to its associated call leg
for the call.
This rate is different from the configuration rate
because of rate negotiation during the call."
::= { cvCommonDcCallActiveEntry 3 }
cvCommonDcCallActiveCodecBytes OBJECT-TYPE
SYNTAX INTEGER (10..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the payload size of the voice packet."
::= { cvCommonDcCallActiveEntry 4 }
cvCommonDcCallActiveInBandSignaling OBJECT-TYPE
SYNTAX CvcInBandSignaling
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the type of in-band signaling being used on
the call. This object is instantiated only for
Connection Trunk calls."
::= { cvCommonDcCallActiveEntry 5 }
cvCommonDcCallActiveCallingName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calling party name this call is connected to. If the
name is not available, then it will have a length of zero."
::= { cvCommonDcCallActiveEntry 6 }
cvCommonDcCallActiveCallerIDBlock OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the caller ID feature
is blocked for this voice call."
::= { cvCommonDcCallActiveEntry 7 }
-- ****************************************************************************
-- Voice Common Call History Group
-- ****************************************************************************
--
-- Voice Common Call History Table
cvCommonDcCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCommonDcCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the Common extension to the call history
table of IETF Dial Control MIB. It contains Common call
leg information about a network call leg."
::= { cvCommonDcCallHistory 1 }
cvCommonDcCallHistoryEntry OBJECT-TYPE
SYNTAX CvCommonDcCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The common information regarding a single network call
leg. The call leg entry is identified by using the same
index objects that are used by Call Active table of IETF
Dial Control MIB to identify the call.
An entry of this table is created when its associated
call history entry in the IETF Dial Control MIB is
created and the call history entry contains information
for the call establishment to a network dialpeer.
The entry is deleted when its associated call history
entry in the IETF Dial Control MIB is deleted."
INDEX { cCallHistoryIndex }
::= { cvCommonDcCallHistoryTable 1 }
CvCommonDcCallHistoryEntry ::= SEQUENCE {
cvCommonDcCallHistoryConnectionId CvcGUid,
cvCommonDcCallHistoryVADEnable TruthValue,
cvCommonDcCallHistoryCoderTypeRate CvcCoderTypeRate,
cvCommonDcCallHistoryCodecBytes INTEGER,
cvCommonDcCallHistoryInBandSignaling CvcInBandSignaling,
cvCommonDcCallHistoryCallingName SnmpAdminString,
cvCommonDcCallHistoryCallerIDBlock TruthValue
}
cvCommonDcCallHistoryConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier for the gateway call."
::= { cvCommonDcCallHistoryEntry 1 }
cvCommonDcCallHistoryVADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the VAD (Voice
Activity Detection) was enabled for the voice call."
::= { cvCommonDcCallHistoryEntry 2 }
cvCommonDcCallHistoryCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit rate
of voice/fax compression to its associated call leg for
the call.
This rate is different from the configuration rate
because of rate negotiation during the call."
::= { cvCommonDcCallHistoryEntry 3 }
cvCommonDcCallHistoryCodecBytes OBJECT-TYPE
SYNTAX INTEGER (10..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the payload size of the voice packet."
::= { cvCommonDcCallHistoryEntry 4 }
cvCommonDcCallHistoryInBandSignaling OBJECT-TYPE
SYNTAX CvcInBandSignaling
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the type of in-band signaling used on the
call. This object is instantiated only for
Connection Trunk calls."
::= { cvCommonDcCallHistoryEntry 5 }
cvCommonDcCallHistoryCallingName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calling party name this call is connected to. If
the name is not available, then it will have a length
of zero."
::= { cvCommonDcCallHistoryEntry 6 }
cvCommonDcCallHistoryCallerIDBlock OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the caller ID
feature is blocked for this voice call."
::= { cvCommonDcCallHistoryEntry 7 }
-- **********************************************************************
-- Notifications
-- **********************************************************************
cvCommonDcMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoVoiceCommonDialControlMIB 2 }
cvCommonDcMIBNotifications OBJECT IDENTIFIER
::= { cvCommonDcMIBNotificationPrefix 0 }
cvCommonDcMIBConformance OBJECT IDENTIFIER
::= { ciscoVoiceCommonDialControlMIB 3 }
cvCommonDcMIBCompliances OBJECT IDENTIFIER
::= { cvCommonDcMIBConformance 1 }
cvCommonDcMIBGroups OBJECT IDENTIFIER
::= { cvCommonDcMIBConformance 2 }
-- **********************************************************************
-- Compliance statements
-- **********************************************************************
cvCommonDcMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE COMMON MIB"
MODULE -- this module
MANDATORY-GROUPS { cvCommonDcCallGroup }
::= { cvCommonDcMIBCompliances 1 }
cvCommonDcMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE COMMON MIB"
MODULE -- this module
MANDATORY-GROUPS { cvCommonDcCallGroup1 }
OBJECT cvCommonDcCallActiveCallingName
SYNTAX SnmpAdminString (SIZE (0..64))
DESCRIPTION
"Support is required only for the subset of
SnmpAdminString values which contain ASCII characters.
In effect, a minimal implementation implements this
object as a DisplayString."
OBJECT cvCommonDcCallHistoryCallingName
SYNTAX SnmpAdminString (SIZE (0..64))
DESCRIPTION
"Support is required only for the subset of
SnmpAdminString values which contain ASCII characters.
In effect, a minimal implementation implements this
object as a DisplayString."
::= { cvCommonDcMIBCompliances 2 }
-- units of conformance
cvCommonDcCallGroup OBJECT-GROUP
OBJECTS {
cvCommonDcCallActiveConnectionId,
cvCommonDcCallActiveVADEnable,
cvCommonDcCallActiveCoderTypeRate,
cvCommonDcCallActiveCodecBytes,
cvCommonDcCallActiveInBandSignaling,
cvCommonDcCallHistoryConnectionId,
cvCommonDcCallHistoryVADEnable,
cvCommonDcCallHistoryCoderTypeRate,
cvCommonDcCallHistoryCodecBytes,
cvCommonDcCallHistoryInBandSignaling
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the common network
call leg information."
::= { cvCommonDcMIBGroups 1 }
cvCommonDcCallGroup1 OBJECT-GROUP
OBJECTS {
cvCommonDcCallActiveConnectionId,
cvCommonDcCallActiveVADEnable,
cvCommonDcCallActiveCoderTypeRate,
cvCommonDcCallActiveCodecBytes,
cvCommonDcCallActiveInBandSignaling,
cvCommonDcCallActiveCallingName,
cvCommonDcCallActiveCallerIDBlock,
cvCommonDcCallHistoryConnectionId,
cvCommonDcCallHistoryVADEnable,
cvCommonDcCallHistoryCoderTypeRate,
cvCommonDcCallHistoryCodecBytes,
cvCommonDcCallHistoryInBandSignaling,
cvCommonDcCallHistoryCallingName,
cvCommonDcCallHistoryCallerIDBlock
}
STATUS current
DESCRIPTION
"A collection of objects providing the common network
call leg information."
::= { cvCommonDcMIBGroups 2 }
END