david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-VOICE-DIAL-CONTROL-MIB

7211 lines
270 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-VOICE-DIAL-CONTROL-MIB.my: Voice Dial Control MIB file
--
-- September 1996 Hongchi Shih
--
-- Copyright (c) 1996-1999, 2000-2003, 2004-2006, 2009-2012 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-VOICE-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
IpAddress,
Gauge32,
Integer32,
Unsigned32,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DisplayString,
RowStatus,
TruthValue,
TimeStamp,
PhysAddress,
DateAndTime
FROM SNMPv2-TC
callActiveSetupTime,
callActiveIndex,
AbsoluteCounter32,
callActivePeerAddress,
callActivePeerId
FROM DIAL-CONTROL-MIB
QosService
FROM INT-SERV-MIB
ifIndex,
InterfaceIndexOrZero
FROM IF-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
cCallHistoryIndex,
cCallHistoryCallOrigin
FROM CISCO-DIAL-CONTROL-MIB
CvcSpeechCoderRate,
CvcFaxTransmitRate,
CvcCoderTypeRate,
CvcGUid,
CvcInBandSignaling,
cvCommonDcCallHistoryCoderTypeRate,
CvcCallReferenceIdOrZero
FROM CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
DnisMapname
FROM CISCO-VOICE-DNIS-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoVoiceDialControlMIB MODULE-IDENTITY
LAST-UPDATED "201205150000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-voice@cisco.com"
DESCRIPTION
"This MIB module enhances the IETF Dial Control MIB
(RFC2128) by providing management of voice telephony
peers on both a circuit-switched telephony network,
and an IP data network.
*** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
GSM - Global System for Mobile Communication
AMR-NB - Adaptive Multi Rate - Narrow Band
iLBC - internet Low Bitrate Codec
KPML - Key Press Markup Language
MGCP - Media Gateway Control Protocol.
SIP - Session Initiation Protocol.
H323 - One of the voip signalling protocol.
SCCP - Skinny Client Control Protocol.
dialpeer - This represents a configured interface that
carries the dial map. A dialpeer maps the
called and calling numbers with the port or
IP interface to be used.
License call capacity - This represents the licensed
maximum call capacity of
the gateway.
iSAC - Internet Speech Audio Codec
RPH - Resource Priority Header
DSCP - Diffserv Code Points"
REVISION "201205150000Z"
DESCRIPTION
"[1] Added New OBJECT-GROUP cvCallVolumeStatsHistory
in cvGatewayCallHistory.
[2] Added following tables
cvCallRateStatsTable,
cvCallLegRateStatsTable,
cvActiveCallStatsTable,
cvCallDurationStatsTable,
cvSipMsgRateStatsTable under cvCallVolumeStatsHistory
[3] Added following tables
cvCallRateWMTable,
cvCallLegRateWMTable,
cvActiveCallWMTable,
cvSipMsgRateWMTable under cvCallVolumeStatsHistory
[4] Added following textual conversation
CvCallVolumeStatsIntvlType &
CvCallVolumeWMIntvlType
[5] Added new cvdcCallVolumeStatsHistory conformance group
in cvdcMIBGroups.
[6] Added cvdcMIBComplianceRev22 depricating cvdcMIBComplianceRev21"
REVISION "201107110000Z"
DESCRIPTION
"[1] Added cvVoIPCallActiveSessionId in cvVoIPCallActiveEntry and
cvVoIPCallHistorySessionId in cvVoIPCallHistoryEntry
[2] Added cvVoIPCallActiveSessionId and
cvVoIPCallHistorySessionId to cvVoIPCallGroupSup3
[3] Deprecated cvVoIPCallGroupSup2 and superceded it with
cvVoIPCallGroupSup3
[4] Deprecated cvdcMIBComplianceRev20 and superceded it with
with cvdcMIBComplianceRev21"
REVISION "201105310000Z"
DESCRIPTION
"The following changes is done for RPH to DSCP mapping and Media
policy feature.
1) Added two new objects in the cvVoIPCallActiveEntry
ccVoIPCallActivePolicyName
cvVoIPCallActiveReversedDirectionPeerAddress
2) Added one new notification object
cvdcPolicyViolationNotification
3) Imported two objects from DIAL-CONTROL-MIB
callActivePeerId
callActivePeerAddress
4) Added four objects as part of new Notification
cvdcPolicyViolationNotification
ccVoIPCallActiveViolationReason
cvVoIPCallActiveCalledNumber
callActivePeerId
callActivePeerAddress
5) Added new notification group cvdcNotificationGroupRev4 and
changed the status of cvdcNotificationGroupRev3 to depricated.
6) Added new conformance group cvVoIPCallGroupSup2 and changed
the status of cvVoIPCallGroupSup1 to deprecated.
7) Modified cvdcMIBComplianceRev20 to add new groups and remove
the deprecated one
8) Added the following objects in CvVoIPPeerCfgEntry
cvVoIPPeerCfgDSCPPolicyNotificationEnable
cvVoIPPeerCfgMediaPolicyNotificationEnable
9) Added the following objects in cvdcGeneralCfgGroupRev6
cvGeneralDSCPPolicyNotificationEnable
cvGeneralMediaPolicyNotificationEnable"
REVISION "201007260000Z"
DESCRIPTION
"[1] Modified MAX-ACCESS for cvVoIPPeerCfgFrameSize from read-only to read-write.
[2] Added a call reference ID to associate the video call entry and
voice call entry of the same endpoint."
REVISION "200905070000Z"
DESCRIPTION
"[1] Added Abbreviation for iSAC
[2] Added the following objects to cvVoIPPeerCfgTable for iSAC
codec support.
- cvVoIPPeerCfgCodingMode
- cvVoIPPeerCfgBitRate
- cvVoIPPeerCfgFramesize
[3] Added a new OBJECT-GROUP cvdcVoIPCfgISACGroup.
[4] Added a new MODULE-COMPLIANCE cvdcMIBComplianceRev19 which
deprecates cvdcMIBComplianceRev18."
REVISION "200904200000Z"
DESCRIPTION
"The following changes have been made.
[1] Added new CvCallConnectionType TEXTUAL-CONVENTION.
[2] Added the following new OBJECT IDENTIFIERs:
cvCallVolume,
cvCallRateMonitor
[3] Added the following objects to cvCallVolume:
cvCallVolConnTable,
cvCallVolConnTotalActiveConnections,
cvCallVolConnMaxCallConnectionLicenese,
cvCallVolPeerTable,
cvCallVolIfTable.
[4] Added the following objects to new cvCallVolConnTable:
cvCallVolConnIndex,
cvCallVolConnActiveConnection.
[5] Added the following objects to new cvCallVolPeerTable:
cvCallVolPeerIncomingCalls,
cvCallVolPeerOutgoingCalls.
[6] Added the following objects to new cvCallVolIfTable:
cvCallVolMediaIncomingCalls,
cvCallVolMediaOutgoingCalls.
[7] Added the following objects to cvCallRateMonitor:
cvCallRateMonitorEnable,
cvCallRateMonitorTime,
cvCallRate,
cvCallRateHiWaterMark.
[8] Add the following OBJECT-GROUPs:
cvCallVolumeGroup,
cvCallRateMonitorGroup.
[9] Deprecated MODULE-COMPLIANCE cvdcMIBComplianceRev17.
[10] Added MODULE-COMPLIANCE cvdcMIBComplianceRev18."
REVISION "200901120000Z"
DESCRIPTION
"The following changes have been made.
[1] The descriptions of the following objects have
been modified to replace the term 'call identifier'
with 'connection identifier'.
cvCallActiveConnectionId
cvVoIPCallActiveConnectionId
cvCallHistoryConnectionId
cvVoIPCallHistoryConnectionId.
[2] The object cvCallActiveCallId has been added
to cvCallActiveTable.
[3] The object cvVoIPCallActiveCallId has been added
to cvVoIPCallActiveTable.
[4] The object cvCallHistoryCallId has been added
to cvCallHistoryTable.
[5] The object cvVoIPCallHistoryCallId has been added
to cvVoIPCallHistoryTable.
[6] 'sipKpml' has been added to the object
cvVoIPPeerCfgDigitRelay.
[7] Added following OBJECT-GROUPs
cvCallGroupSup1,
cvVoIPCallGroupSup1
[8] Deprecated MODULE-COMPLIANCE
cvdcMIBComplianceRev16 and is superceded by
cvdcMIBComplianceRev17."
REVISION "200603120000Z"
DESCRIPTION
"[1] Added Abbreviations for GSM, AMR-NB and iLBC
[2] Added cvVoIPPeerCfgCoderMode object to
cvVoIPPeerCfgTable for iLBC codec support.
[3] Added cvVoIPCallActiveCoderMode object to
cvVoIPCallActiveTable for iLBC codec support.
[4] Added cvVoIPCallHistoryCoderMode object to
cvVoIPCallHistoryTable for iLBC codec support.
[5] Created CvIlbcFrameMode textual convention.
[6] Added REFERENCE clause to all new MIB objects and
textual conventions added.
[7] Created cvVoIPCallIlbcGroup and cvdcVoIPCfgIlbcGroup
groups for iLBC specific objects.
[8] Created module-compliance cvdcMIBComplianceRev16 and
made cvVoIPCallIlbcGroup and cvdcVoIPCfgIlbcGroup
as non mandatory.
[9] Changed the default value for cvVoIPPeerCfgBitRates to
all 8 bitrates as all 8 bitrates are supported."
REVISION "200509290000Z"
DESCRIPTION
"Modified DESCRIPTION of cvPeerCfgPeerType object."
REVISION "200507250000Z"
DESCRIPTION
"[1] Add new objects to cvVoIPCallActiveTable and
cvVoIPCallHistoryTable for GSM AMR-NB codec support:
Frame type, Bit rates, Mode change period,
Mode change neighbor, Max payload time, CRC,
Robust sorting, Encapsulation, Payload time
channels, for call active and history table.
[2] Add new objects to cvVoIPPeerCfgTable for GSM AMR-NB
codec support:
Frame type, Bit rates and CRC.
[3] Created groups cvVoIPCallAmrNbGroup and
cvdcVoIPCfgAmrNbGroup, for GSM AMR-NB
specific objects.
[4] Created a module-compliance cvdcMIBComplianceRev13
and made cvVoIPCallAmrNbGroup and cvdcVoIPCfgAmrNbGroup
as non mandatory.
[5] Created following textual conventions:
CvAmrNbBitRateMode and CvAmrNbRtpEncap."
REVISION "200503020000Z"
DESCRIPTION
"The following values were added to the
cvVoicePeerCfgEchoCancellerTest object:
echoCancellerG168Test5,
echoCancellerG168Test7"
REVISION "200503010000Z"
DESCRIPTION
"Modified DESCRIPTION of cvVoIPCallHistoryFallbackLoss
object."
REVISION "200404300000Z"
DESCRIPTION
"Added object
Added cvVoIPCallHistoryRemSigIPAddrT and
cvVoIPCallHistoryRemSigIPAddr to the
cvdcFallbackNotification ."
REVISION "200404160000Z"
DESCRIPTION
"Added object cvVoIPCallHistoryFallbackIcpif,
cvVoIPCallHistoryFallbackLoss and
cvVoIPCallHistoryFallbackDelay
to the cvVoIPCallHistoryTable.
Added cvdcFallbackNotification for the
fallback notification.
Added cvGeneralFallbackNotificationEnable to
enable/disable cvdcFallbackNotification."
REVISION "200403090000Z"
DESCRIPTION
"Added new objects for handling the following features:
[1] The number of DS0s with voice calls up.
cvCallActiveDS0s
[2] The threshold number of DS0s above which a
Notification will be triggered.
cvCallActiveDS0sHighThreshold
[3] The threshold number of DS0s below which a
Notification will be triggered.
cvCallActiveDS0sLowThreshold
[4] Objects to enable the above two notifications.
cvCallActiveDS0sHighNotifyEnable,
cvCallActiveDS0sLowNotifyEnable.
[5] Notifications for the above two thresholds.
cvdcActiveDS0sHighNotification,
cvdcActiveDS0sLowNotification."
REVISION "200401200000Z"
DESCRIPTION
"Added object cvVoIPCallActiveSRTPEnable to
cvVoIPCallActiveTable and cvVoIPCallHistorySRTPEnable
to cvVoIPCallHistoryTable to indicate whether SRTP is
enabled on a call."
REVISION "200306260000Z"
DESCRIPTION
"Modified the DEVAL definition of
cvVoIPPeerCfgDigitRelay object based on
no bit field was enabled when the object
was created."
REVISION "200304140000Z"
DESCRIPTION
"The DESCRIPTION of the following objects was
modified to specify the allowable characters
cvPeerCommonCfgSourceTrunkGrpLabel
cvPeerCommonCfgTargetTrunkGrpLabel
cvPeerCommonCfgSourceCarrierId
cvPeerCommonCfgTargetCarrierId."
REVISION "200212310000Z"
DESCRIPTION
"The following values were added to the
cvVoicePeerCfgEchoCancellerTest object:
echoCancellerG168Test4,
echoCancellerG168Test6,
echoCancellerG168Test9"
REVISION "200212020000Z"
DESCRIPTION
"The range of the following objects was changed:
cvCallActiveNoiseLevel
cvCallActiveACOMLevel
cvCallActiveOutSignalLevel
cvCallActiveInSignalLevel
cvVoIPCallHistoryIcpif"
REVISION "200210310000Z"
DESCRIPTION
"Add object cvVoIPPeerCfgMediaSetting to the table.
This object defines whether IP-IP media streams will
flow-through or flow-around the Gateway.
Add two new objects cvVoIPPeerCfgDesiredQoSVideo and
cvVoIPPeerCfgMinAcceptableQoSVideo to the table
cvVoIPPeerCfgTable. Also added objects
cvCallActiveAccountCode and cvCallHistoryAccountCode.
Depreciating element cvCallActiveERLLevel
Adding New element cvCallActiveERLLevelRev1
Adding New type sipNotify in cvVoIPPeerCfgDigitRelay
Adding New element cvVoIPPeerCfgRedirectip2ip in
CvVoIPPeerCfgEntry"
REVISION "200207120000Z"
DESCRIPTION
"* Add a new cvPeerCfgPeerType object to define the
peer type
* Added rtpNte, a new value for the
cvVoIPPeerCfgDigitRelay object."
REVISION "200108200000Z"
DESCRIPTION
"Addition of the following objects:
cvVoIPCallActiveUsername
cvVoIPCallActiveProtocolCallId
cvVoIPCallActiveRemSigIPAddrT
cvVoIPCallActiveRemSigIPAddr
cvVoIPCallActiveRemSigPort
cvVoIPCallActiveRemMediaIPAddrT
cvVoIPCallActiveRemMediaIPAddr
cvVoIPCallActiveRemMediaPort
cvVoIPCallHistoryUsername
cvVoIPCallHistoryProtocolCallId
cvVoIPCallHistoryRemSigIPAddrT
cvVoIPCallHistoryRemSigIPAddr
cvVoIPCallHistoryRemSigPort
cvVoIPCallHistoryRemMediaIPAddrT
cvVoIPCallHistoryRemMediaIPAddr
cvVoIPCallHistoryRemMediaPort
cvdcPoorQoVNotificationRev1
Deprecation of the following objects:
cvVoIPCallActiveRemoteIPAddress
cvVoIPCallActiveRemoteUDPPort
cvVoIPCallHistoryRemoteIPAddress
cvVoIPCallHistoryRemoteUDPPort
cvdcPoorQoVNotification"
REVISION "200107020000Z"
DESCRIPTION
"Add two new objects cvPeerCommonCfgSourceTrunkGrpLabel and
cvPeerCommonCfgTargetTrunkGrpLabel."
REVISION "200104100000Z"
DESCRIPTION
"[1] Add a new object for handling the following feature:
Location in milliseconds of largest amplitude reflector
detected by echo canceller in call active table.
Add new object for specifying an echo canceller test to
to be run when a call using a dial peer so configured is
connected.
[2] Change QosService import from INT-SERV-MIB to
INTEGRATED-SERVICES-MIB, since INTEGRATED-SERVICES-MIB
(RFC2213) is where QosService is defined."
REVISION "200103250000Z"
DESCRIPTION
"Add two new objects cvPeerCommonCfgSourceCarrierId and
cvPeerCommonCfgTargetCarrierId. Add a enum definition to
cvVoIPPeerCfgSessionTarget object."
REVISION "200005040000Z"
DESCRIPTION
"Add new objects for handling the following features:
[1] Calling Name display for call active and history table.
[2] Caller ID Block, which indicates whether the Caller ID
feature is in using, for call active and history table."
REVISION "200004190000Z"
DESCRIPTION
"Changed VoIP dialpeer default values for
Icpif to 20
ExpectFactor to 0"
REVISION "200003130000Z"
DESCRIPTION
"Adding a new object cvPeerCommonCfgDnisMappingName."
REVISION "9906280000Z"
DESCRIPTION
"Moved common Textual Conventions and the following items in
the VoIP Call Active and Call History tables to the
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB, as these items apply to
multiple network encapsulations.
CoderTypeRate
VADEnable
Added new objects for handling the following features:
[1] Gatekeeper registration configuration for voice peer
destination pattern.
[2] Dialpeer huntstop configuration.
[3] Voip configuration support for Coder Bytes, Fax Bytes,
settlement server and inband signaling.
Added the following objects to the cvdcPoorQoVNotification.
cvVoIPCallHistoryRemoteIPAddress,
cCallHistoryCallOrigin,
cvCommonDcCallHistoryCoderTypeRate"
REVISION "9901290000Z"
DESCRIPTION
"Add new enums in cvVoIPPeerCfgDigitRelay object for
handling the transmission of dtmf digits across an
H.245 channel via the signal and alphanumeric fields."
REVISION "9809110000Z"
DESCRIPTION
"Add new objects for handling the following features:
[1] FAX page count for call active and history table.
[2] Peer Preference for peer configuration.
[3] Add FAX rate 12000 bps, G723.1 Annex A codec support.
[4] Technology prefix for VoIP encapsulated peer
configuration.
[5] Modify cvCallActiveACOMLeve, cvCallActiveERLLevel and
cvCallHistoryACOMLevel to support undeterminable state.
[6] Add digit relay configuration feature."
REVISION "9802220000Z"
DESCRIPTION
"Add new objects for handling the following:
[1] DNIS number matching.
[2] Maximum connection to/from peer.
[3] DID call treatment enable/disable.
[4] Dial peer association to lower layer interfaces with
CAS group.
[5] Lost/Ealy/Late voice packets object in both call active
and call history tables.
[6] Update compliance statements."
::= { ciscoMgmt 63 }
CvCallVolumeWMIntvlType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the Id of the watermark table.
Here is what different values represent
1 : Seconds Table: Here the entries are among last 60 second
2 : Minutes Table: Here the entries are among last 60 minutes
3 : Hours Table: Here the entries are among last 72 Hours
4 : Uptime Table: Here the entries are from last reload/reboot"
SYNTAX INTEGER {
secondStats(1),
minuteStats(2),
hourStats(3),
fromReloadStats(4)
}
CvCallVolumeStatsIntvlType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the ids of the stats vlolume table
Here is what each entry corresponds.
1 : Seconds Table: Here each entry corresponds to a second
2 : Minutes Table: Here each entry corresponds to a minute
3 : Hours Table: Here each entry corresponds to an hour"
SYNTAX INTEGER {
secondStats(1),
minuteStats(2),
hourStats(3)
}
-- Textual Conventions
--
--
-- Session Protocol textual convention
CvSessionProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a Session Protocol used by Voice calls between a
local and remote router via the IP backbone.
other - none of the following.
cisco - cisco proprietary H.323 Lite session protocol.
sdp - Session Description Protocol.
sip - Session Initiation Protocol.
sccp - Skinny Call Control Protocol."
SYNTAX INTEGER {
other(1),
cisco(2),
sdp(3),
sip(4),
multicast(5),
sccp(6)
}
-- Channel Associated Signalling Group (CAS) group definition
CvCasGroup ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The Channel Associated Signalling Group of a
T1/E1. The valid CAS group range is from 0 to 23 for T1
and from 0 to 30 for E1. The value -1 indicates CAS group is
disabled."
SYNTAX Integer32 (-1..30)
-- GSM AMR-NB Bit rate modes
CvAmrNbBitRateMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents GSM AMR-NB bit rate modes.
CodecMode Bit-rate (kbps)
0 4.75
1 5.15
2 5.90
3 6.70
4 7.40
5 7.95
6 10.2
7 12.2"
SYNTAX BITS {
amrBitRateMode0(0),
amrBitRateMode1(1),
amrBitRateMode2(2),
amrBitRateMode3(3),
amrBitRateMode4(4),
amrBitRateMode5(5),
amrBitRateMode6(6),
amrBitRateMode7(7)
}
-- GSM AMR-NB Encapsulation types
CvAmrNbRtpEncap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents GSM AMR-NB codec RTP encapsulation type."
SYNTAX INTEGER {
rfc3267(1)
}
-- iLBC codec modes
CvIlbcFrameMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This Texatual Convention represents the iLBC codec
frame modes.
The possible values are :
frameMode20: This mode operates at 15.2 kbps and each
frame is packetized in 38 bytes.
frameMode30: This mode operates at 13.33 kbps and each
frame is packetized in 50 bytes."
REFERENCE "RFC 3952: Section 4.2 for details about iLBC mode"
SYNTAX INTEGER {
frameMode20(20),
frameMode30(30)
}
-- call connection textual convention
CvCallConnectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Call connection represents the connection/association/session
between two media call end points. Following are the different
connection types.
h323 - h323 protocol.
sip - Session Initiation Protocol.
mgcp - Media Gateway Control Protocol.
sccp - Cisco proprietary Skinny Call Control Protocol.
multicast - multicast call connections.
cacontrol - Call Agent Control.
telephony - telephony signal call connections."
SYNTAX INTEGER {
h323(1),
sip(2),
mgcp(3),
sccp(4),
multicast(5),
cacontrol(6),
telephony(7)
}
-- Overview of Voice Gateway Call between Data and Telephony network
--
-- | Network | Voice | Voice | Telephony |
-- <========+== Protocol ==+=Gateway=+=== Peer ===+= Interfaces =+==========>
-- Data | : I | U | R | | | DS0 T1/E1 | Telephony
-- Network | P | D | T | voice | Voice | ISDN B | Network
-- | | P | P | session |encapsulation FXO |
-- | | | | protocol| | E&M |
-- | | | | | | FXS |
-- |Voice P|
-- <==========================+Packet<=*=>C+================>
-- Voice packet | M PCM data
-- CODEC
--
-- CODEC: Coder and Decoder.
-- PCM : Pulse Code Modulation.
--
-- Voice Gateway call leg connections are as follows:
--
-- [1] Call establishment using a local telephony interface
-- Call establishment using a local telephony interface involves
-- the Voice Session Control module, the Voice/FAX Protocol module,
-- and the Telephony interface itself. Voice Session Control is
-- responsible for controlling the local telephony interfaces and
-- assigning a Voice/FAX encapsulation module, with its associated
-- CODEC (most CODECs execute in DSP code) to the call. The CODEC is
-- responsible for encode/decode, as well has the generation and
-- detection of signaling information, such as call progress tones,
-- DTMF or pulse dialing signals, etc. During an active call, the
-- selected CODEC is responsible for collecting the voice and fax
-- statistics for the call.
--
-- [2] Call establishment using the session protocol over IP backbone
-- Call establishment using the session protocol over IP backbone
-- involves the Voice Session Control module, VoIP encapsulation
-- module, and RTP protocol module. Voice Session Control is
-- responsible for controlling the selected session protocol and
-- assigning a VoIP encapsulation module with its associated RTP
-- (real-time transport protocol) connection to a VoIP call. For an
-- active VoIP call, the RTP protocol is responsible for collecting
-- the voice packet statistics for the call.
--
-- This MIB uses IETF Dial Control MIB (RFC2128) as a base and adds
-- features to support voice calls via a Voice-over-IP gateway. The
-- supports connection establishment of both telephony circuit-switched
-- call and the Voice-over-IP session.
-- The following architectural diagram illustrates this:
--
-- +================================================================+
-- | Voice Gateway |
-- +===+ +=========+ +=======+ +=======+ +==========+ +=============+
-- | | | | | | | | | |
-- | | | | | | | | | |
-- | | | | | | | | | |
-- | | | | | | | | | |
-- | | | | | | | | | |
-- | | | | | | | | | |
-- | | | | | | | | | |<== appears
-- | | | | | | | | | | active
-- +=+ +=+ +=+ +=+ +=+ +=+ +=+ +=+ +=+ +=+
-- |VOICE| |VOICE| |VOICE| |VOICE| |VoIP | VOICE
-- | for | | for | | for | | for | | for | ifEntry with
-- |Peer1| |Peer2| |Peer3| |Peer4| |Peer5| shadow
-- | | | | | | | | | | Voice PeerEntry
-- +=====+ +=+ +=+ +=+ +=+ +=+ +=+ +=====+
-- | | | | | | <== appears
-- +=======+ +==+ +==+ +==+ +==+ | | active when
-- | B | | B | | DS0 | | | the VOICE
-- |channel| |channel| |channel| | | connects to
-- +==+ +==+ +==+ +==+ +==+ +==+ | | telephony
-- | | | | | | | | interface
-- +===+ +=========+ +==+ +==+ +==+ +==+ +======+
-- | ISDN BRI/PRI | | T1/E1 | |E&M/FXO/FXS|
-- +====================+ +=======+ +===========+
--
-- In this model, each voice peer must have an associated VOICE
-- encapsulation interface ifEntry. Grouping of peer entries is
-- supported through the dialCtlPeerCfgId of the IETF Dial Control MIB,
-- allowing the particular type of telephony interfaces for a call to
-- be selected at call establishment time.
--
-- The VOICE encapsulation interface is normally used to convert
-- between PCM (pulse code modulation) voice produced and consumed by
-- the lower layer telephony interfaces and compressed packetized voice
-- exchanged between the CODEC and the voice session control module.
--
-- Each VOICE encapsulation ifEntry contains the ifType 'voiceEncap'.
-- The VOICE interface for each voice peer correlates to lower-level
-- telephony interface via ifStackTable.
--
-- Each VoIP encapsulation ifEntry contains the ifType 'voiceOverIp'
-- For each VoIP encapsulation associated peer, the
-- dialCtlPeerCfgIfType object of IETF Dial Control MIB must set to
-- 'other' and dialCtlPeerCfgLowerIf must set to '0'.
--
--
-- Support for generic peers
--
-- Generic Voice related Peers can be supported by permitting the left
-- justified substring of a phone number in
-- dialCtlPeerCfgOriginateAddress and dialCtlPeerCfgAnswerAddress of
-- IETF Dial control MIB for specifying a group of voice encapsulation
-- and voice over IP peers.
-- The leading '+' in these two objects indicates the E.164 phone
-- number (e.g. +1408526, +1408, +1, +) substring.
--
-- The dialCtlPeerCfgOriginateAddress of the peer contains a wild-card
-- number for the outgoing call. For example, the '+1408526' in
-- dialCtlPeerCfgOriginateAddress means that the peer is used for the
-- outgoing call to the phones with a number of the form 1-408-526-xxxx.
--
-- The dialCtlPeerCfgAnswerAddress of the voice encapsulation peer
-- contains the same type of regular expression as the one that is
-- specified in dialCtlPeerCfgOriginateAddress for filtering incoming
-- call from telephony interface.
--
-- The dialCtlPeerCfgAnswerAddress of the voice over IP peer contains
-- an IP address wild-card (with regular expression rule) for filtering
-- the incoming call from IP backbone.
--
-- ifEntry for the 'voiceEncap' Encapsulation
--
-- The ifEntry for the 'voiceEncap' encapsulation supports the
-- ifGeneralInformationGroup of Cisco IF-MIB.
--
-- ifTable Comments
-- ============== ===========================================
-- ifIndex Each voice encapsulation is represented by an
-- ifEntry.
-- ifDescr Textual description
-- "Voice Encapsulation: ".
-- ifType The IANA value of voiceEncap(103).
-- ifSpeed contains a zero value.
-- ifPhysAddress contains an octet string of zero length.
--
-- ifAdminStatus The desired administrative status of the
-- voice encapsulation.
-- ifOperStatus The current operational status of the voice
-- encapsulation.
-- ifLastChange Refer to RFC 1573.
-- ifLinkUpDownTrapEnable
-- Only support the read-only ifLinkUpDownTrapEnable.
-- It contains a 'disabled(2)' value.
-- ifConnectorPresent
-- Refer to RFC 1573.
-- ifHighSpeed contains a zero value.
-- ifName Refer to RFC 1573.
-- ifAlias Refer to RFC 1573.
--
--
-- ifEntry for the 'voiceOverIp' encapsulation
--
-- The ifEntry for the 'voiceOverIp' encapsulation supports the
-- ifGeneralInformationGroup of Cisco IF-MIB
--
-- ifTable Comments
-- ============== ===========================================
-- ifIndex Each voiceOverIp encapsulation is represented by
-- an ifEntry.
-- ifDescr Textual description
-- "Voice Over IP Encapsulation: ".
-- ifType The IANA value of voiceOverIp(104).
-- ifSpeed contains a zero value.
-- ifPhysAddress contains an octet string of zero length.
--
-- ifAdminStatus The desired administrative status of the
-- VoIP encapsulation.
-- ifOperStatus The current operational status of the VoIP
-- encapsulation.
-- ifLastChange Refer to RFC 1573.
-- ifLinkUpDownTrapEnable
-- Only support the read-only ifLinkUpDownTrapEnable.
-- It contains a 'disabled(2)' value.
-- ifConnectorPresent
-- Refer to RFC 1573.
-- ifHighSpeed contains a zero value.
-- ifName Refer to RFC 1573.
-- ifAlias Refer to RFC 1573.
--
--
-- Voice Dial Control MIB objects definitions
cvdcMIBObjects OBJECT IDENTIFIER
::= { ciscoVoiceDialControlMIB 1 }
-- The Voice Dial Control MIB consists of the following group
-- [1] Voice Dial Control General Configuration group
-- (cvGeneralConfiguration)
-- [2] Voice Dial Control Peer Group (cvPeer)
-- [3] Voice Dial Control Gateway Call Active Group
-- (cvGatewayCallActive)
-- [4] Voice Dial Control Gateway Call History Group
-- (cvGatewayCallHistory)
cvGeneralConfiguration OBJECT IDENTIFIER
::= { cvdcMIBObjects 1 }
cvPeer OBJECT IDENTIFIER
::= { cvdcMIBObjects 2 }
cvGatewayCallActive OBJECT IDENTIFIER
::= { cvdcMIBObjects 3 }
cvGatewayCallHistory OBJECT IDENTIFIER
::= { cvdcMIBObjects 4 }
-- ********************************************************************
-- Voice Dial Control General Configuration Group
-- ********************************************************************
--
-- Voice Dial Control general configuration data/parameters
cvGeneralPoorQoVNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether cvdcPoorQoVNotification (or
the newer cvdcPoorQoVNotificationRev1) traps should be
generated for a poor quality of voice calls.
If the value of this object is 'true',
cvdcPoorQoVNotification (or the newer
cvdcPoorQoVNotificationRev1) traps will be generated
for all voice over IP peers when a poor quality of voice
call condition is detected after the voice gateway call
disconnection. If the value of this object is 'false',
cvdcPoorQoVNotification (or the newer
cvdcPoorQoVNotificationRev1) traps will be generated only
for calls for which the
cvVoIPPeerCfgPoorQoVNotificationEnable object of voice
over IP peers having set to 'true'."
DEFVAL { false }
::= { cvGeneralConfiguration 1 }
cvGeneralFallbackNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether cvdcFallbackNotification
traps should be generated for fallback.
If the value of this object is 'true',
cvdcFallbackNotification traps will be generated
for all voice over IP peers."
DEFVAL { false }
::= { cvGeneralConfiguration 2 }
cvGeneralDSCPPolicyNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether cvdcPolicyViolationNotification
traps should be generated for a RPH to DSCP mapping violation
for SIP voice calls.
If the value of this object is 'true',
cvdcPolicyViolationNotification traps will be generated for SIP
voice over IP peers when a RPH to DSCP violation condition is
detected . If the value of this object is 'false',
cvdcPolicyViolationNotification traps will be generated only
for calls for which the
cvVoIPPeerCfgDSCPPolicyNotificationEnable object of voice
over IP peers having set to 'true'."
DEFVAL { false }
::= { cvGeneralConfiguration 3 }
cvGeneralMediaPolicyNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether cvdcPolicyViolationNotification
traps should be generated for Media violation
for SIP voice calls.
If the value of this object is 'true',
cvdcPolicyViolationNotification traps will be generated for SIP
voice over IP peers when media violation condition is
detected . If the value of this object is 'false',
cvdcPolicyViolationNotification traps will be generated only
for calls for which the
cvVoIPPeerCfgMediaPolicyNotificationEnable object of voice
over IP peers having set to 'true'."
DEFVAL { false }
::= { cvGeneralConfiguration 4 }
-- *********************************************************************
-- Voice Dial Control Peer Group
-- *********************************************************************
-- The objects in this group are responsible for the voice related peer
-- configuration which controls the dial string and the interface or
-- session target for the call establishment to a peer on the telephony
-- network or on the IP backbone.
--
-- Voice Generic Peer Configuration Table
cvPeerCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the Voice Generic Peer information that
is used to create an ifIndexed row with an appropriate
ifType that is associated with the cvPeerCfgType and
cvPeerCfgPeerType objects."
::= { cvPeer 1 }
cvPeerCfgEntry OBJECT-TYPE
SYNTAX CvPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single voice generic Peer. The creation of this
entry will create an associated ifEntry with an ifType
that is associated with cvPeerCfgType, i.e., for
'voiceEncap' encapsulation, an ifEntry will contain an
ifType voiceEncap(103); for 'voiceOverIp' encapsulation,
an ifEntry will contain an ifType voiceOverIp(104). The
ifAdminStatus of the newly created ifEntry is set to 'up'
and ifOperStatus is set to 'down'. In addition, an
associated voiceEncap/voiceOverIp Peer configuration
entry is created after the successful ifEntry creation.
Then ifIndex of the newly created ifEntry must be used by
the network manager to create a peer configuration entry
of IETF Dial Control MIB (Refer to RFC 2128 section
2.2.3.1 and the description of dialCtlPeerCfgEntry for the
detailed information).
In summary, the voice dial peer creation steps are as
follows:
[1] create this entry (voice/data generic peer entry).
[2] read the cvPeerCfgIfIndex of this entry for the
ifIndex of newly created voice/data generic peer.
[3] create the dialCtlPeerCfgEntry of RFC 2128 with the
indices of dialCtlPeerCfgId and the ifIndex of newly
created voice generic peer.
For each VoIP peer, it uses IP address and UDP port with
RTP protocol to transfer voice packet. Therefore, it does
not have its lower layer interface. The
dialCtlPeerCfgIfType object of IETF Dial Control MIB must
set to 'other' and the dialCtlPeerCfgLowerIf must set to
'0'.
After the successful creation of peer configuration entry
of IETF Dial Control MIB, the dial plan software in
managed device will set the ifOperStatus of the newly
created voiceEncap/voiceOverIp ifEntry to 'up' for
enabling the peer function if the peer configuration is
completed.
When this entry is deleted, its associated ifEntry,
voiceEncap/voiceOverIp specific peer entry and the peer
entry of IETF Dial Control MIB are deleted."
INDEX { cvPeerCfgIndex }
::= { cvPeerCfgTable 1 }
CvPeerCfgEntry ::= SEQUENCE {
cvPeerCfgIndex Integer32,
cvPeerCfgIfIndex InterfaceIndexOrZero,
cvPeerCfgType INTEGER,
cvPeerCfgRowStatus RowStatus,
cvPeerCfgPeerType INTEGER
}
cvPeerCfgIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index that uniquely identifies a generic
voice peer."
::= { cvPeerCfgEntry 1 }
cvPeerCfgIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the peer associated ifEntry. The ifIndex
appears after the associated ifEntry is created
successfully.
This ifIndex will be used to access the objects in the
Voice over Telephony or Voice over IP peer specific table.
In addition, the ifIndex is also used to access the
associated peer configuration entry of the IETF Dial
Control MIB. If the peer associated ifEntry had not been
created, then this object has a value of zero."
::= { cvPeerCfgEntry 2 }
cvPeerCfgType OBJECT-TYPE
SYNTAX INTEGER {
voice(1),
voip(2),
mmail(3),
voatm(4),
vofr(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of voice related encapsulation.
voice - voice encapsulation (voiceEncap ifType) on the
telephony network.
voip - VoIP encapsulation (voiceOverIp ifType) on the IP
network.
mmail - Media Mail over IP encapsulation (mediaMailOverIp
ifType) on the IP network.
voatm - VoATM encapsulation (voiceOverATM ifType) on the
ATM network.
vofr - VoFR encapsulation (voiceOverFR ifType) on the
Frame Relay network."
DEFVAL { voice }
::= { cvPeerCfgEntry 3 }
cvPeerCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or modify or
delete an existing row in this table."
::= { cvPeerCfgEntry 4 }
cvPeerCfgPeerType OBJECT-TYPE
SYNTAX INTEGER {
voice(1),
data(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of a peer.
voice - peer in voice type to be defined in a voice
gateway for voice calls.
data - peer in data type to be defined in gateway
that supports universal ports for modem/data
calls and integrated ports for data calls."
DEFVAL { voice }
::= { cvPeerCfgEntry 5 }
-- Voice over Telephony specific Peer Configuration Table
cvVoicePeerCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvVoicePeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the Voice over Telephony peer specific
information that is required to accept voice calls or to
which it will place them or perform various loopback tests
via interface."
::= { cvPeer 2 }
cvVoicePeerCfgEntry OBJECT-TYPE
SYNTAX CvVoicePeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Voice specific Peer. One entry per voice
encapsulation.
The entry is created when its associated 'voiceEncap(103)'
encapsulation ifEntry is created.
This entry is deleted when its associated ifEntry is
deleted."
INDEX { ifIndex }
::= { cvVoicePeerCfgTable 1 }
CvVoicePeerCfgEntry ::= SEQUENCE {
cvVoicePeerCfgSessionTarget DisplayString,
cvVoicePeerCfgDialDigitsPrefix DisplayString,
cvVoicePeerCfgDIDCallEnable TruthValue,
cvVoicePeerCfgCasGroup CvCasGroup,
cvVoicePeerCfgRegisterE164 TruthValue,
cvVoicePeerCfgForwardDigits Integer32,
cvVoicePeerCfgEchoCancellerTest INTEGER
}
cvVoicePeerCfgSessionTarget OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the session target of the peer.
Session Targets definitions:
The session target has the syntax used by the IETF service
location protocol. The syntax is as follows:
mapping-type:type-specific-syntax
the mapping-type specifies a scheme for mapping the
matching dial string to a session target.
The valid Mapping type definitions for the peer are as
follows:
loopback - Syntax: loopback:where
'where' string is defined as follows:
compressed - loopback is performed on compressed voice
as close to the CODEC which processes the
data as possible.
uncompressed - loopback is performed on the PCM or
analog voice as close to the telephony
endpoint as possible.
Local loopback case:
uncompressed - the PCM voice coming into the DSP is simply
turned around and sent back out, allowing testing of
the transmit--> receive paths in the telephony
endpoint.
compressed - the compressed voice coming out of the CODEC is
turned around on the DSP module and fed back into the
decompressor through the jitter buffer. In addition to
the telephony endpoint, this tests both the encode and
decode paths without involving data paths or packet
handling on the host router.
Remote loopback case:
compressed - RTP packets received from the network are
decapsulated and passed to the DSP board. Instead of
feeding these into the CODEC for decompression, they
are immediately sent back to the session application
as if they had originated locally and been compressed.
uncompressed - In addition to the above, the voice samples
are sent all the way through the CODEC and then turned
around instead of being sent to the telephony
endpoint"
DEFVAL { "" }
::= { cvVoicePeerCfgEntry 1 }
cvVoicePeerCfgDialDigitsPrefix OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the prefix of the dial digits for the
peer. The dial digits prefix is sent to telephony
interface before the real phone number when the system
places the outgoing call to the voice encapsulation peer
over telephony interface."
DEFVAL { "" }
::= { cvVoicePeerCfgEntry 2 }
cvVoicePeerCfgDIDCallEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object enables/disables the DID call treatment for
incoming DNIS digits.
true - treat the incoming DNIS digits as if the digits
are received from DID trunk.
false - Disable DID call treatment for incoming DNIS
digits."
DEFVAL { false }
::= { cvVoicePeerCfgEntry 3 }
cvVoicePeerCfgCasGroup OBJECT-TYPE
SYNTAX CvCasGroup
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the CAS group number of a CAS
capable T1/E1 that is in the dialCtlPeerCfgLowerIf object
of RFC2128.
This object can be set to a valid CAS group number only if
the dialCtlPeerCfgLowerIf contains a valid ifIndex for a
CAS capable T1/E1. The object must set to -1 before the
value of the dialCtlPeerCfgLowerIf object of RFC2128 can
be changed."
DEFVAL { -1 }
::= { cvVoicePeerCfgEntry 4 }
cvVoicePeerCfgRegisterE164 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies that the E.164 number specified in
the dialCtlPeerCfgOriginateAddress field of the associated
dialCtlPeerCfgTable entry be registered as an extension
phone number of this gateway for H323 gatekeeper and/or
SIP registrar."
DEFVAL { false }
::= { cvVoicePeerCfgEntry 5 }
cvVoicePeerCfgForwardDigits OBJECT-TYPE
SYNTAX Integer32 (-3..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of dialed digits to
forward to the remote destination in the setup message.
The object can take the value:
0-32 number of right justified digits to forward
-1 default
-2 forward extra digits i.e those over and above
those needed to match to the destination pattern
-3 forward all digits"
DEFVAL { 0 }
::= { cvVoicePeerCfgEntry 6 }
cvVoicePeerCfgEchoCancellerTest OBJECT-TYPE
SYNTAX INTEGER {
echoCancellerTestNone(1),
echoCancellerG168Test2A(2),
echoCancellerG168Test2B(3),
echoCancellerG168Test2Ca(4),
echoCancellerG168Test2Cb(5),
echoCancellerG168Test3A(6),
echoCancellerG168Test3B(7),
echoCancellerG168Test3C(8),
echoCancellerG168Test4(9),
echoCancellerG168Test6(10),
echoCancellerG168Test9(11),
echoCancellerG168Test5(12),
echoCancellerG168Test7(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which, if any, test to run in the
echo canceller when a call from the network is connected.
echoCancellerTestNone - do not run a test.
echoCancellerG168Test2A - run ITU-T G.168 Test 2A.
echoCancellerG168Test2B - run ITU-T G.168 Test 2B.
echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
echoCancellerG168Test3A - run ITU-T G.168 Test 3A.
echoCancellerG168Test3B - run ITU-T G.168 Test 3B.
echoCancellerG168Test3C - run ITU-T G.168 Test 3C.
echoCancellerG168Test4 - run ITU-T G.168 Test 4.
echoCancellerG168Test5 - run ITU-T G.168 Test 5.
echoCancellerG168Test6 - run ITU-T G.168 Test 6.
echoCancellerG168Test7 - run ITU-T G.168 Test 7.
echoCancellerG168Test9 - run ITU-T G.168 Test 9."
REFERENCE
"ITU-T G.168(04/2000): Section 6.4 Tests and requirements
for performance with input signals applied to the send and
receive paths."
DEFVAL { echoCancellerTestNone }
::= { cvVoicePeerCfgEntry 7 }
-- Voice over IP specific Peer Configuration Table
cvVoIPPeerCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvVoIPPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the Voice over IP (VoIP) peer specific
information that is required to accept voice calls or to
which it will place them via IP backbone with the
specified session protocol in cvVoIPPeerCfgSessionProtocol."
::= { cvPeer 3 }
cvVoIPPeerCfgEntry OBJECT-TYPE
SYNTAX CvVoIPPeerCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single VoIP specific Peer. One entry per VoIP
encapsulation.
The entry is created when its associated 'voiceOverIp(104)'
encapsulation ifEntry is created.
This entry is deleted when its associated ifEntry is
deleted."
INDEX { ifIndex }
::= { cvVoIPPeerCfgTable 1 }
CvVoIPPeerCfgEntry ::= SEQUENCE {
cvVoIPPeerCfgSessionProtocol CvSessionProtocol,
cvVoIPPeerCfgDesiredQoS QosService,
cvVoIPPeerCfgMinAcceptableQoS QosService,
cvVoIPPeerCfgSessionTarget DisplayString,
cvVoIPPeerCfgCoderRate CvcSpeechCoderRate,
cvVoIPPeerCfgFaxRate CvcFaxTransmitRate,
cvVoIPPeerCfgVADEnable TruthValue,
cvVoIPPeerCfgExpectFactor Integer32,
cvVoIPPeerCfgIcpif Integer32,
cvVoIPPeerCfgPoorQoVNotificationEnable TruthValue,
cvVoIPPeerCfgUDPChecksumEnable TruthValue,
cvVoIPPeerCfgIPPrecedence Integer32,
cvVoIPPeerCfgTechPrefix DisplayString,
cvVoIPPeerCfgDigitRelay BITS,
cvVoIPPeerCfgCoderBytes Integer32,
cvVoIPPeerCfgFaxBytes Integer32,
cvVoIPPeerCfgInBandSignaling CvcInBandSignaling,
cvVoIPPeerCfgMediaSetting INTEGER,
cvVoIPPeerCfgDesiredQoSVideo QosService,
cvVoIPPeerCfgMinAcceptableQoSVideo QosService,
cvVoIPPeerCfgRedirectip2ip TruthValue,
cvVoIPPeerCfgOctetAligned TruthValue,
cvVoIPPeerCfgBitRates CvAmrNbBitRateMode,
cvVoIPPeerCfgCRC TruthValue,
cvVoIPPeerCfgCoderMode CvIlbcFrameMode,
cvVoIPPeerCfgCodingMode INTEGER,
cvVoIPPeerCfgBitRate Unsigned32,
cvVoIPPeerCfgFrameSize INTEGER,
cvVoIPPeerCfgDSCPPolicyNotificationEnable TruthValue,
cvVoIPPeerCfgMediaPolicyNotificationEnable TruthValue
}
cvVoIPPeerCfgSessionProtocol OBJECT-TYPE
SYNTAX CvSessionProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the session protocol to be used
for Internet call between local and remote router via
IP backbone."
DEFVAL { cisco }
::= { cvVoIPPeerCfgEntry 1 }
cvVoIPPeerCfgDesiredQoS OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the user requested Quality of Service
for the call."
DEFVAL { bestEffort }
::= { cvVoIPPeerCfgEntry 2 }
cvVoIPPeerCfgMinAcceptableQoS OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the minimally acceptable Quality of
Service for the call."
DEFVAL { bestEffort }
::= { cvVoIPPeerCfgEntry 3 }
cvVoIPPeerCfgSessionTarget OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the session target of the peer.
Session Targets definitions:
The session target has the syntax used by the IETF service
location protocol. The syntax is as follows:
mapping-type:type-specific-syntax
the mapping-type specifies a scheme for mapping the
matching dial string to a session target. The
type-specific-syntax is exactly that, something that the
particular mapping scheme can understand.
For example,
Session target Meaning
ipv4:171.68.13.55:1006 The session target is the IP
version 4 address of 171.68.13.55
and port 1006.
dns:pots.cisco.com:1661 The session target is the IP host
with dns name pots.cisco.com, and
port 1661.
ras The session target is the
gatekeeper with RAS (Registration
, Admission, Status protocol).
settlement The session target is the
settlement server.
enum:1 The session target is the enum
profile match table 1.
The valid Mapping type definitions for the peer are as
follows:
ipv4 - Syntax: ipv4:w.x.y.z:port or ipv4:w.x.y.z
dns - Syntax: dns:host.domain:port or
dns:host.domain
ras - Syntax: ras
settlement - Syntax: settlement
enum - Syntax: enum:
loopback - Syntax: loopback:where
'where' string is defined as follows:
rtp - loopback is performed at the transport protocol
level.
Local loopback case:
rtp - the session application sets up an RTP stream to
itself (i.e. actually allocates a port pair and opens
the appropriate UDP sockets). It then does the full
RTP encapsulation, sends the packets to the loopback
IP address, receives the RTP packets, and hands the
compressed voice back to the CODEC. This tests the
entire local processing path, both transmit and
receive, in the router, as well as all of the above
paths.
Remote loopback case:
rtp: RTP packets received from the network are decapsulated and
immediately re-encapsulated in the outbound RTP
stream, using the same media clock (i.e. timestamp)
as the received packet. They are then sent back to
the remote source router as if the voice had
originated on a telephony port on the local router."
DEFVAL { "" }
::= { cvVoIPPeerCfgEntry 4 }
cvVoIPPeerCfgCoderRate OBJECT-TYPE
SYNTAX CvcSpeechCoderRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the most desirable codec of speech
for the VoIP peer."
DEFVAL { g729IETFr8000 }
::= { cvVoIPPeerCfgEntry 5 }
cvVoIPPeerCfgFaxRate OBJECT-TYPE
SYNTAX CvcFaxTransmitRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the default transmit rate of FAX
the VoIP peer. If the value of this object is 'none',
then the Fax relay feature is disabled; otherwise the Fax
relay feature is enabled."
DEFVAL { voiceRate }
::= { cvVoIPPeerCfgEntry 6 }
cvVoIPPeerCfgVADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether or not the VAD (Voice
Activity Detection) voice data is continuously transmitted
to IP backbone."
DEFVAL { true }
::= { cvVoIPPeerCfgEntry 7 }
cvVoIPPeerCfgExpectFactor OBJECT-TYPE
SYNTAX Integer32 (0..20)
UNITS "equipment impairment factor (eif)"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the user requested Expectation
Factor of voice quality for the call via this peer."
REFERENCE
"ITU G.113: Sections 8 Considerations Concerning the
Expectation Factor A."
DEFVAL { 0 }
::= { cvVoIPPeerCfgEntry 8 }
cvVoIPPeerCfgIcpif OBJECT-TYPE
SYNTAX Integer32 (0..55)
UNITS "equipment impairment factor (eif)"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the user requested Calculated
Planning Impairment Factor (Icpif) for the call via this
peer."
REFERENCE
"ITU G.113: Sections 9 Considerations associated with the
Calculated Planning Impairment Factor (Icpif)"
DEFVAL { 20 }
::= { cvVoIPPeerCfgEntry 9 }
cvVoIPPeerCfgPoorQoVNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether cvdcPoorQoVNotification (or
the newer cvdcPoorQoVNotificationRev1) traps should be
generated for the call that is associated with this
peer."
DEFVAL { false }
::= { cvVoIPPeerCfgEntry 10 }
cvVoIPPeerCfgUDPChecksumEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the outgoing voice related
UDP packet contains a valid checksum value.
true - enable the checksum of outgoing voice UDP packets
false - disable the checksum of outgoing voice UDP packets"
DEFVAL { false }
::= { cvVoIPPeerCfgEntry 11 }
cvVoIPPeerCfgIPPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the value to be stored in the IP
Precedence field of voice packets, with values ranging
from 0 (normal precedence) through 7 (network control),
allowing the managed system to set the importance of each
voice packet for delivering them to the destination peer."
REFERENCE
"RFC 791: Section 3.1. Internet Header Format; Type of
Service."
DEFVAL { 0 }
::= { cvVoIPPeerCfgEntry 12 }
cvVoIPPeerCfgTechPrefix OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the technology prefix of the peer,
The technology prefix and the called party address
are passed in Admission Request (ARQ) to gatekeeper
for the called party address resolution during call setup."
REFERENCE
"ITU-T H.225.0: Section 7.6 Common Message Elements."
DEFVAL { "" }
::= { cvVoIPPeerCfgEntry 13 }
cvVoIPPeerCfgDigitRelay OBJECT-TYPE
SYNTAX BITS {
rtpCisco(0),
h245Signal(1),
h245Alphanumeric(2),
rtpNte(3),
sipNotify(4),
sipKpml(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the methods to transmit dial digits
(DTMF or MF digits) via IP network.
rtpCisco - Enable capability to transmit dial digits
with Cisco proprietary RTP payload type.
h245Signal - Enable capability to transmit dtmf digits
across the H.245 channel, via the signal
field of the UserInputIndication message
h245Alphanumeric - Enable capability to transmit dtmf
digit across the H.245 channel, via the
string or alphanumeric fields of the
UserInputIndication message
rtpNte - Enable capability to transmit dial digits
using Named Telephony Event per RFC 2833
section 3.
sipNotify - Enable capability to transmit dtmf
digits using unsolicited SIP NOTIFY
messages. This mechanism is only available
for SIP dialpeers.
sipKpml - Enable capability to transmit dtmf
digits using KPML over SIP SUBSCRIBE
and NOTIFY messages. This mechanism is
only available for SIP dialpeers.
Modifying the value of cvVoIPPeerCfgSessionProtocol
can reset the digit-relay method associated bits value in
this object if the modified session protocol does not
support these digit-relay methods."
REFERENCE
"[1] ITU H.245: Section 6.
[2] RFC 2833 : Section 3."
DEFVAL { { } }
::= { cvVoIPPeerCfgEntry 14 }
cvVoIPPeerCfgCoderBytes OBJECT-TYPE
SYNTAX Integer32 (0 | 10..240)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the size of the voice payload sample
to be produced by the coder specified in
cvVoIPPeerCfgCoderRate.
Each coder sample produces 10 bytes of voice payload. The
specified value will be rounded down to the nearest valid
size.
A value of 0, specifies that the coder defined by
cvVoIPPeerCfgCoderRate should produce its default payload
size."
DEFVAL { 0 }
::= { cvVoIPPeerCfgEntry 15 }
cvVoIPPeerCfgFaxBytes OBJECT-TYPE
SYNTAX Integer32 (0 | 10..255)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the payload size to be produced by
the coder when it is generating fax data. A value of 0,
specifies that the coder specified in
cvVoIPCfgPeerCoderRate should produce its default fax
payload size."
DEFVAL { 0 }
::= { cvVoIPPeerCfgEntry 16 }
cvVoIPPeerCfgInBandSignaling OBJECT-TYPE
SYNTAX CvcInBandSignaling
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of in-band signaling that
will be used between the end points of the call. It is
used by the router to determine how to interpret ABCD
signaling bits sent as part of voice payload data."
DEFVAL { cas }
::= { cvVoIPPeerCfgEntry 17 }
cvVoIPPeerCfgMediaSetting OBJECT-TYPE
SYNTAX INTEGER {
flowThrough(1),
flowAround(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies how the media is to be setup on
an IP-IP Gateway. Two choices are valid: flow-through
and flow-around. When in flow-through mode, which is the
default setting, the IP-IP Gateway will terminate and
then re-originate the media stream. When flow-around
is configured the Gateway will not be involved with the
media, since it will flow-around the Gateway and will
be established directly between the endpoints."
DEFVAL { flowThrough }
::= { cvVoIPPeerCfgEntry 23 }
cvVoIPPeerCfgDesiredQoSVideo OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the user requested Quality of Service
for the video portion of the call."
DEFVAL { bestEffort }
::= { cvVoIPPeerCfgEntry 24 }
cvVoIPPeerCfgMinAcceptableQoSVideo OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the minimally acceptable Quality of
Service for the video portion of the call."
DEFVAL { bestEffort }
::= { cvVoIPPeerCfgEntry 25 }
cvVoIPPeerCfgRedirectip2ip OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Inbound VoIP calls that match
an outbound VoIP dialpeer will be responded with a SIP
redirect(for inbound SIP) or H.450.3 call-forward(for
inbound H.323)."
DEFVAL { false }
::= { cvVoIPPeerCfgEntry 26 }
cvVoIPPeerCfgOctetAligned OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the object has a value true(1) octet align operation
is used, and if the value is false(2), bandwidth efficient
operation is used. This object is not instantiated when
the object cvVoIPPeerCfgCoderRate is not equal to
gsmAmrNb enum."
DEFVAL { true }
::= { cvVoIPPeerCfgEntry 27 }
cvVoIPPeerCfgBitRates OBJECT-TYPE
SYNTAX CvAmrNbBitRateMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates modes of Bit rates. One or more
upto four modes can be configured at the same time as
bit rates can be changed dynamically for AMR-NB codec.
This object is not instantiated when the object
cvVoIPPeerCfgCoderRate is not equal to gsmAmrNb enum."
DEFVAL { { } }
::= { cvVoIPPeerCfgEntry 28 }
cvVoIPPeerCfgCRC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the object has a value of true(1), frame CRC will be
included in the payload and if the value is false(2),
frame CRC will not be included in the payload.
This object is applicable only when RTP frame type
is octet aligned. This object is not instantiated when
the object cvVoIPPeerCfgCoderRate is not equal to
gsmAmrNb enum."
DEFVAL { false }
::= { cvVoIPPeerCfgEntry 29 }
cvVoIPPeerCfgCoderMode OBJECT-TYPE
SYNTAX CvIlbcFrameMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the iLBC codec mode to be used.
The value of this object is valid only if
cvVoIPPeerCfgCoderRate is equal to 'iLBC'."
REFERENCE
"RFC 3952: Section 4.2 - MIME Registration of iLBC"
DEFVAL { frameMode20 }
::= { cvVoIPPeerCfgEntry 30 }
cvVoIPPeerCfgCodingMode OBJECT-TYPE
SYNTAX INTEGER {
adaptive(1),
independent(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the coding mode to be used. The object is
instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'. Following
coding modes are supported:
adaptive (1) - adaptive mode where iSAC performs bandwidth
estimation and adapts to the available channel
bandwidth.
independent (2) - independent mode in which no bandwidth
estimation
is performed."
DEFVAL { independent }
::= { cvVoIPPeerCfgEntry 31 }
cvVoIPPeerCfgBitRate OBJECT-TYPE
SYNTAX Unsigned32 (10000..32000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the target bit rate. The object is
instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'."
DEFVAL { 32000 }
::= { cvVoIPPeerCfgEntry 32 }
cvVoIPPeerCfgFrameSize OBJECT-TYPE
SYNTAX INTEGER {
frameSize30(1),
frameSize60(2),
frameSize30fixed(3),
frameSize60fixed(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the frame size used. The object is
instantiated only if cvVoIPPeerCfgCoderRate is 'iSAC'.
The frame size can be 30 ms or 60 ms, and it can be fixed for
all packets or vary depending on the configuration and bandwidth
estimation. Thus it can have the following values:
frameSize30 - initial frame size of 30 ms
frameSize60 - initial frame size of 60 ms
frameSize30fixed - fixed frame size 30 ms
frameSize60fixed - fixed frame size 60 ms"
DEFVAL { frameSize30 }
::= { cvVoIPPeerCfgEntry 33 }
cvVoIPPeerCfgDSCPPolicyNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether cvdcPolicyViolationNotification
traps should be generated for the call that is associated with
this peer for RPH to DSCP mapping and policing feature."
DEFVAL { false }
::= { cvVoIPPeerCfgEntry 34 }
cvVoIPPeerCfgMediaPolicyNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether cvdcPolicyViolationNotification
traps should be generated for the call that is associated with
this peer for Media policing feature.."
DEFVAL { false }
::= { cvVoIPPeerCfgEntry 35 }
-- Voice specific common Peer Configuration Table
cvPeerCommonCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvPeerCommonCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the Voice specific peer common
configuration information that is required to accept voice
calls or to which it will place them or process the
incoming calls."
::= { cvPeer 4 }
cvPeerCommonCfgEntry OBJECT-TYPE
SYNTAX CvPeerCommonCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Voice specific Peer. One entry per voice related
encapsulation.
The entry is created when a voice related encapsulation
ifEntry is created.
This entry is deleted when its associated ifEntry is
deleted."
INDEX { ifIndex }
::= { cvPeerCommonCfgTable 1 }
CvPeerCommonCfgEntry ::= SEQUENCE {
cvPeerCommonCfgIncomingDnisDigits DisplayString,
cvPeerCommonCfgMaxConnections Integer32,
cvPeerCommonCfgApplicationName DisplayString,
cvPeerCommonCfgPreference Integer32,
cvPeerCommonCfgHuntStop TruthValue,
cvPeerCommonCfgDnisMappingName DnisMapname,
cvPeerCommonCfgSourceCarrierId SnmpAdminString,
cvPeerCommonCfgTargetCarrierId SnmpAdminString,
cvPeerCommonCfgSourceTrunkGrpLabel SnmpAdminString,
cvPeerCommonCfgTargetTrunkGrpLabel SnmpAdminString
}
cvPeerCommonCfgIncomingDnisDigits OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the prefix of the incoming Dialed
Number Identification Service (DNIS) digits for the peer.
The DNIS digits prefix is used to match with the incoming
DNIS number for incoming call discrimination. If the
digits in this object are matched with incoming DNIS
number, the associated dialCtlPeerCfgInfoType in RFC 2128
will be used as a call discriminator for differentiating
speech, data, fax, video or modem calls."
DEFVAL { "" }
::= { cvPeerCommonCfgEntry 1 }
cvPeerCommonCfgMaxConnections OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..2147483647)
UNITS "connections"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the maximum allowed connection
to/from the peer. A value of -1 disables the limit of
maximum connections."
DEFVAL { -1 }
::= { cvPeerCommonCfgEntry 2 }
cvPeerCommonCfgApplicationName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the application to handle the incoming
call after the peer is selected.
If no application name is specified, then the default
session application will take care of the incoming call."
DEFVAL { "" }
::= { cvPeerCommonCfgEntry 3 }
cvPeerCommonCfgPreference OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the selection preference of a peer
when multiple peers are matched to the selection criteria.
The value of 0 has the lowest preference for peer
selection."
DEFVAL { 0 }
::= { cvPeerCommonCfgEntry 4 }
cvPeerCommonCfgHuntStop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether dialpeer hunting should stop
when this peer is reached."
DEFVAL { false }
::= { cvPeerCommonCfgEntry 5 }
cvPeerCommonCfgDnisMappingName OBJECT-TYPE
SYNTAX DnisMapname
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies a Dialer Number Identification
Service (DNIS) map name for the Voice specific peer
entry specified in this row. A DNIS is a called party
number and they can be grouped and identified by DNIS
map."
DEFVAL { "" }
::= { cvPeerCommonCfgEntry 6 }
cvPeerCommonCfgSourceCarrierId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the Source Carrier Id for the peer.
The Source Carrier Id is used to match with the Source
Carrier Id of a call. If the Source Carrier Id in this
object is matched with the Source Carrier Id of a call,
then the associated peer will be used to handle the call.
Only alphanumeric characters, '-' and '_' are allowed in
the string."
DEFVAL { "" }
::= { cvPeerCommonCfgEntry 7 }
cvPeerCommonCfgTargetCarrierId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the Target Carrier Id for the peer.
The Target Carrier Id is used to match with the Target
Carrier Id of a call. If the Target Carrier Id in this
object is matched with the Target Carrier Id of a call,
then the associated peer will be used to handle the call.
Only alphanumeric characters, '-' and '_' are allowed in
the string."
DEFVAL { "" }
::= { cvPeerCommonCfgEntry 8 }
cvPeerCommonCfgSourceTrunkGrpLabel OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the Source Trunk Group Label for the
peer. The Source Trunk Group Label is used to match with
the Source Trunk Group Label of a call. If the Source
Trunk Group Label in this object is matched with the
Source Trunk Group Label of a call, then the associated
peer will be used to handle the call.
Only alphanumeric characters, '-' and '_' are allowed in
the string."
DEFVAL { "" }
::= { cvPeerCommonCfgEntry 9 }
cvPeerCommonCfgTargetTrunkGrpLabel OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the Target Trunk Group Label for the
peer. The Target Trunk Group Label is used to match with
the Target Trunk Group Label of a call. If the Target
Trunk Group Label in this object is matched with the
Target Trunk Group Label of a call, then the associated
peer will be used to handle the call.
Only alphanumeric characters, '-' and '_' are allowed in
the string."
DEFVAL { "" }
::= { cvPeerCommonCfgEntry 10 }
--
-- *********************************************************************
-- Voice Dial Control Gateway Call Active Group
-- *********************************************************************
--
-- For an end-to-end Gateway call, it normally has two or more call leg
-- entries appear in the call active table after a successful end-to-end
-- Gateway call establishment. The unique global call identifier in
-- each call leg is used to identify a specific end-to-end call.
-- If the call leg entries in call active table contain the same
-- global call identifier, they belong to the same gateway call.
--
--
-- Voice over Telephony Call Active Table
cvCallActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the voice extension to the call active table
of IETF Dial Control MIB. It contains voice encapsulation
call leg information that is derived from the statistics
of lower layer telephony interface."
::= { cvGatewayCallActive 1 }
cvCallActiveEntry OBJECT-TYPE
SYNTAX CvCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single voice encapsulation
call leg.
The call leg entry is identified by using the same index
objects that are used by Call Active table of IETF Dial
Control MIB to identify the call.
An entry of this table is created when its associated call
active entry in the IETF Dial Control MIB is created and
call active entry contains the call establishment to a
voice over telephony network peer.
The entry is deleted when its associated call active entry
in the IETF Dial Control MIB is deleted."
INDEX {
callActiveSetupTime,
callActiveIndex
}
::= { cvCallActiveTable 1 }
CvCallActiveEntry ::= SEQUENCE {
cvCallActiveConnectionId CvcGUid,
cvCallActiveTxDuration AbsoluteCounter32,
cvCallActiveVoiceTxDuration AbsoluteCounter32,
cvCallActiveFaxTxDuration AbsoluteCounter32,
cvCallActiveCoderTypeRate CvcCoderTypeRate,
cvCallActiveNoiseLevel Integer32,
cvCallActiveACOMLevel Integer32,
cvCallActiveOutSignalLevel Integer32,
cvCallActiveInSignalLevel Integer32,
cvCallActiveERLLevel Integer32,
cvCallActiveSessionTarget DisplayString,
cvCallActiveImgPageCount AbsoluteCounter32,
cvCallActiveCallingName SnmpAdminString,
cvCallActiveCallerIDBlock TruthValue,
cvCallActiveEcanReflectorLocation Integer32,
cvCallActiveAccountCode SnmpAdminString,
cvCallActiveERLLevelRev1 Integer32,
cvCallActiveCallId Unsigned32
}
cvCallActiveConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global connection identifier for the
active telephony leg of the call."
::= { cvCallActiveEntry 1 }
cvCallActiveTxDuration OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of Transmit path open from this peer to the
voice gateway for the call leg. This counter object will
lock at the maximum value which is approximately two
days."
::= { cvCallActiveEntry 2 }
cvCallActiveVoiceTxDuration OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice transmitted from this peer to voice
gateway for this call leg. The Voice Utilization Rate can
be obtained by dividing this by cvCallActiveTXDuration
object. This counter object will lock at the maximum
value which is approximately two days."
::= { cvCallActiveEntry 3 }
cvCallActiveFaxTxDuration OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of fax transmitted from this peer to voice gateway
for this call leg. The FAX Utilization Rate can be
obtained by dividing this by cvCallActiveTXDuration
object. This counter object will lock at the maximum
value which is approximately two days."
::= { cvCallActiveEntry 4 }
cvCallActiveCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit rate of
voice/fax compression to its associated call leg for the
call."
::= { cvCallActiveEntry 5 }
cvCallActiveNoiseLevel OBJECT-TYPE
SYNTAX Integer32 (-128..8)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object contains the active noise level for the call
leg."
::= { cvCallActiveEntry 6 }
cvCallActiveACOMLevel OBJECT-TYPE
SYNTAX Integer32 (-1..127)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object contains the sum of Echo Return Loss (ERL),
cancellation loss (Echo Return Loss Enhancement) and
nonlinear processing loss for the call leg.
The value -1 indicates the level can not be determined or
level detection is disabled."
::= { cvCallActiveEntry 7 }
cvCallActiveOutSignalLevel OBJECT-TYPE
SYNTAX Integer32 (-128..8)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object contains the active output signal level to
telephony interface that is used by the call leg."
::= { cvCallActiveEntry 8 }
cvCallActiveInSignalLevel OBJECT-TYPE
SYNTAX Integer32 (-128..8)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object contains the active input signal level from
telephony interface that is used by the call leg."
::= { cvCallActiveEntry 9 }
cvCallActiveERLLevel OBJECT-TYPE
SYNTAX Integer32 (-1..45)
UNITS "dB"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The object contains the current Echo Return Loss (ERL)
level for the call leg.
The value -1 indicates the level can not be determined or
level detection is disabled."
::= { cvCallActiveEntry 10 }
cvCallActiveSessionTarget OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session target of the peer that
is used for the call leg. This object is set with the
information in the call associated
cvVoicePeerCfgSessionTarget object when the call is
connected."
::= { cvCallActiveEntry 11 }
cvCallActiveImgPageCount OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "pages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FAX related image pages are received or
transmitted via the peer for the call leg."
::= { cvCallActiveEntry 12 }
cvCallActiveCallingName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calling party name of the call. If the name is
not available, then it will have a length of zero."
::= { cvCallActiveEntry 13 }
cvCallActiveCallerIDBlock OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the caller ID feature
is blocked for this call."
::= { cvCallActiveEntry 14 }
cvCallActiveEcanReflectorLocation OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The location in milliseconds of the largest amplitude
reflector detected by the echo canceller for this call.
The value 0 indicates there is no reflector or the
information is not available."
::= { cvCallActiveEntry 15 }
cvCallActiveAccountCode OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the account code input to the call.
It could be used for call screen or by down stream server
for billing purpose.
The value of empty string indicates no account code input."
DEFVAL { "" }
::= { cvCallActiveEntry 16 }
cvCallActiveERLLevelRev1 OBJECT-TYPE
SYNTAX Integer32 (-1..200)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object contains the current Echo Return Loss (ERL)
level for the call leg.
The value -1 indicates the level can not be determined or
level detection is disabled."
::= { cvCallActiveEntry 17 }
cvCallActiveCallId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the call identifier
for the active telephony leg of the call."
::= { cvCallActiveEntry 18 }
-- Voice over IP Call Active Table
cvVoIPCallActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvVoIPCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the VoIP extension to the call active table of
IETF Dial Control MIB. It contains VoIP call leg
information about specific VoIP call destination and the
selected QoS for the call leg."
::= { cvGatewayCallActive 2 }
cvVoIPCallActiveEntry OBJECT-TYPE
SYNTAX CvVoIPCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single VoIP call leg.
The call leg entry is identified by using the same index
objects that are used by Call Active table of IETF Dial
Control MIB to identify the call.
An entry of this table is created when its associated call
active entry in the IETF Dial Control MIB is created and
the call active entry contains information for the call
establishment to the peer on the IP backbone via a voice
over IP peer.
The entry is deleted when its associated call active entry
in the IETF Dial Control MIB is deleted."
INDEX {
callActiveSetupTime,
callActiveIndex
}
::= { cvVoIPCallActiveTable 1 }
CvVoIPCallActiveEntry ::= SEQUENCE {
cvVoIPCallActiveConnectionId CvcGUid,
cvVoIPCallActiveRemoteIPAddress IpAddress,
cvVoIPCallActiveRemoteUDPPort Integer32,
cvVoIPCallActiveRoundTripDelay Gauge32,
cvVoIPCallActiveSelectedQoS QosService,
cvVoIPCallActiveSessionProtocol CvSessionProtocol,
cvVoIPCallActiveSessionTarget DisplayString,
cvVoIPCallActiveOnTimeRvPlayout AbsoluteCounter32,
cvVoIPCallActiveGapFillWithSilence AbsoluteCounter32,
cvVoIPCallActiveGapFillWithPrediction AbsoluteCounter32,
cvVoIPCallActiveGapFillWithInterpolation AbsoluteCounter32,
cvVoIPCallActiveGapFillWithRedundancy AbsoluteCounter32,
cvVoIPCallActiveHiWaterPlayoutDelay AbsoluteCounter32,
cvVoIPCallActiveLoWaterPlayoutDelay Gauge32,
cvVoIPCallActiveReceiveDelay Gauge32,
cvVoIPCallActiveVADEnable TruthValue,
cvVoIPCallActiveCoderTypeRate CvcCoderTypeRate,
cvVoIPCallActiveLostPackets AbsoluteCounter32,
cvVoIPCallActiveEarlyPackets AbsoluteCounter32,
cvVoIPCallActiveLatePackets AbsoluteCounter32,
cvVoIPCallActiveUsername SnmpAdminString,
cvVoIPCallActiveProtocolCallId OCTET STRING,
cvVoIPCallActiveRemSigIPAddrT InetAddressType,
cvVoIPCallActiveRemSigIPAddr InetAddress,
cvVoIPCallActiveRemSigPort Integer32,
cvVoIPCallActiveRemMediaIPAddrT InetAddressType,
cvVoIPCallActiveRemMediaIPAddr InetAddress,
cvVoIPCallActiveRemMediaPort Integer32,
cvVoIPCallActiveSRTPEnable TruthValue,
cvVoIPCallActiveOctetAligned TruthValue,
cvVoIPCallActiveBitRates CvAmrNbBitRateMode,
cvVoIPCallActiveModeChgPeriod Integer32,
cvVoIPCallActiveModeChgNeighbor TruthValue,
cvVoIPCallActiveMaxPtime Integer32,
cvVoIPCallActiveCRC TruthValue,
cvVoIPCallActiveRobustSorting TruthValue,
cvVoIPCallActiveEncap CvAmrNbRtpEncap,
cvVoIPCallActiveInterleaving Integer32,
cvVoIPCallActivePtime Integer32,
cvVoIPCallActiveChannels Integer32,
cvVoIPCallActiveCoderMode CvIlbcFrameMode,
cvVoIPCallActiveCallId Unsigned32,
cvVoIPCallActiveCallReferenceId CvcCallReferenceIdOrZero,
ccVoIPCallActivePolicyName DisplayString,
cvVoIPCallActiveReversedDirectionPeerAddress DisplayString,
cvVoIPCallActiveSessionId Unsigned32
}
cvVoIPCallActiveConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global connection identifier for
the active VoIP leg of the call."
::= { cvVoIPCallActiveEntry 1 }
cvVoIPCallActiveRemoteIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Remote system IP address for the VoIP call."
::= { cvVoIPCallActiveEntry 2 }
cvVoIPCallActiveRemoteUDPPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Remote system UDP listener port to which to transmit voice
packets."
::= { cvVoIPCallActiveEntry 3 }
cvVoIPCallActiveRoundTripDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voice packet round trip delay between local and
the remote system on the IP backbone during the call."
::= { cvVoIPCallActiveEntry 4 }
cvVoIPCallActiveSelectedQoS OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selected RSVP QoS for the voice call."
::= { cvVoIPCallActiveEntry 5 }
cvVoIPCallActiveSessionProtocol OBJECT-TYPE
SYNTAX CvSessionProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session protocol to be used
for Internet call between local and remote router via
IP backbone."
::= { cvVoIPCallActiveEntry 6 }
cvVoIPCallActiveSessionTarget OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session target of the peer that
is used for the call. This object is set with the
information in the call associated
cvVoIPPeerCfgSessionTarget object when the voice over IP
call is connected."
::= { cvVoIPCallActiveEntry 7 }
cvVoIPCallActiveOnTimeRvPlayout OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice playout from data received on time for
this call. This plus the durations for the GapFills in the
following entries gives the Total Voice Playout Duration
for Active Voice.
This does not include duration for which no data was sent by the
Transmit end as voice signal, e.g., silence suppression
and fax signal. The On Time Playout Rate can be computed
by dividing this entry by the Total Voice Playout Duration.
This counter object will lock at the maximum value which
is approximately two days."
::= { cvVoIPCallActiveEntry 8 }
cvVoIPCallActiveGapFillWithSilence OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal replaced with signal played out
during silence due to voice data not received on time
(or lost) from voice gateway this call. This counter
object will lock at the maximum value which is
approximately two days."
::= { cvVoIPCallActiveEntry 9 }
cvVoIPCallActiveGapFillWithPrediction OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal played out with signal synthesized
from parameters or samples of data preceding in time due
to voice data not received on time (or lost) from voice
gateway for this call. An example of such playout is
frame-erasure or frame-concealment strategies in G.729 and
G.723.1 compression algorithms. This counter object will
lock at the maximum value which is approximately two days."
::= { cvVoIPCallActiveEntry 10 }
cvVoIPCallActiveGapFillWithInterpolation OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal played out with signal synthesized
from parameters or samples of data preceding and following
in time due to voice data not received on time (or lost)
from voice gateway for this call. This counter object
will lock at the maximum value which is approximately two
days."
::= { cvVoIPCallActiveEntry 11 }
cvVoIPCallActiveGapFillWithRedundancy OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal played out with signal synthesized
from redundancy parameters available due to voice data not
received on time (or lost) from voice gateway for this call.
This counter object will lock at the maximum value which
is approximately two days."
::= { cvVoIPCallActiveEntry 12 }
cvVoIPCallActiveHiWaterPlayoutDelay OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high water mark Voice Playout FIFO Delay during
the voice call. This counter object will lock at the
maximum value which is approximately two days."
::= { cvVoIPCallActiveEntry 13 }
cvVoIPCallActiveLoWaterPlayoutDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low water mark Voice Playout FIFO Delay during
the voice call."
::= { cvVoIPCallActiveEntry 14 }
cvVoIPCallActiveReceiveDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average Playout FIFO Delay plus the decoder delay
during the voice call."
::= { cvVoIPCallActiveEntry 15 }
cvVoIPCallActiveVADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The object indicates whether or not the VAD (Voice Activity
Detection) was enabled for the voice call."
::= { cvVoIPCallActiveEntry 16 }
cvVoIPCallActiveCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The negotiated coder rate. It specifies the transmit rate of
voice/fax compression to its associated call leg for the
call. This rate is different from the configuration rate
because of rate negotiation during the call."
::= { cvVoIPCallActiveEntry 17 }
cvVoIPCallActiveLostPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost voice packets during the call."
::= { cvVoIPCallActiveEntry 18 }
cvVoIPCallActiveEarlyPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received voice packets that
arrived too early to store in jitter buffer
during the call."
::= { cvVoIPCallActiveEntry 19 }
cvVoIPCallActiveLatePackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received voice packets that
arrived too late to playout with CODEC (Coder/Decoder)
during the call."
::= { cvVoIPCallActiveEntry 20 }
cvVoIPCallActiveUsername OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual identifier of the calling party (user) of the
call. If the username is not available, then the value of
this object will have a length of zero."
::= { cvVoIPCallActiveEntry 21 }
cvVoIPCallActiveProtocolCallId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol-specific call identifier for the VoIP call."
::= { cvVoIPCallActiveEntry 22 }
cvVoIPCallActiveRemSigIPAddrT OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of address contained in
the associated instance of cvVoIPCallActiveRemSigIPAddr."
::= { cvVoIPCallActiveEntry 23 }
cvVoIPCallActiveRemSigIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote signalling IP address for the VoIP call."
::= { cvVoIPCallActiveEntry 24 }
cvVoIPCallActiveRemSigPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote signalling listener port to which to transmit
voice packets."
::= { cvVoIPCallActiveEntry 25 }
cvVoIPCallActiveRemMediaIPAddrT OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of address contained in
the associated instance of
cvVoIPCallActiveRemMediaIPAddr."
::= { cvVoIPCallActiveEntry 26 }
cvVoIPCallActiveRemMediaIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote media end point IP address for the VoIP call."
::= { cvVoIPCallActiveEntry 27 }
cvVoIPCallActiveRemMediaPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote media end point listener port to which to transmit
voice packets."
::= { cvVoIPCallActiveEntry 28 }
cvVoIPCallActiveSRTPEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the SRTP (Secured RTP)
was enabled for the voice call."
::= { cvVoIPCallActiveEntry 29 }
cvVoIPCallActiveOctetAligned OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value true(1) octet align operation
is used, and if the value is false(2), bandwidth efficient
operation is used. This object is not instantiated when
the object cvVoIPCallActiveCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 30 }
cvVoIPCallActiveBitRates OBJECT-TYPE
SYNTAX CvAmrNbBitRateMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates modes of Bit rates.
This object is not instantiated when the object
cvVoIPCallActiveCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 31 }
cvVoIPCallActiveModeChgPeriod OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "frame-blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the interval (N frame-blocks) at which
codec mode changes are allowed. This object is not
instantiated when the object cvVoIPCallActiveCoderTypeRate
is not equal to gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 32 }
cvVoIPCallActiveModeChgNeighbor OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value of true(1), mode changes will be
made to only neighboring modes set to
cvVoIPCallActiveBitRates object. If the value is false(2),
mode changes will be allowed to any modes set to
cvVoIPCallActiveBitRates object. This object is not
instantiated when the object cvVoIPCallActiveCoderTypeRate
is not equal to gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 33 }
cvVoIPCallActiveMaxPtime OBJECT-TYPE
SYNTAX Integer32 (20..100)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the maximum amount of media that
can be encapsulated in a payload. Supported value is
20 msec. This object is not instantiated when the
object cvVoIPCallActiveCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 34 }
cvVoIPCallActiveCRC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value of true(1), frame CRC will be
included in the payload and if the value is false(2),
frame CRC will not be included in the payload.
This object is applicable only when RTP frame type
is octet aligned. This object is not instantiated when
the object cvVoIPCallActiveCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 35 }
cvVoIPCallActiveRobustSorting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value of true(1), payload employs
robust sorting and if the value is false(2), payload
does not employ robust sorting. This object is applicable
only when RTP frame type is octet aligned. This object
is not instantiated when the object
cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb
enum."
::= { cvVoIPCallActiveEntry 36 }
cvVoIPCallActiveEncap OBJECT-TYPE
SYNTAX CvAmrNbRtpEncap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the RTP encapsulation type.
Supported RTP encapsulation type is RFC3267.
This object is not instantiated when the object
cvVoIPCallActiveCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 37 }
cvVoIPCallActiveInterleaving OBJECT-TYPE
SYNTAX Integer32 (1..50)
UNITS "frame-blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the maximum number of frame-blocks
allowed in an interleaving group. It indicates that
frame-block level interleaving will be used for that
session. If this object is not set, interleaving
is not used. This object is applicable only when
RTP frame type is octet aligned. This object is not
instantiated when the object cvVoIPCallActiveCoderTypeRate
is not equal to gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 38 }
cvVoIPCallActivePtime OBJECT-TYPE
SYNTAX Integer32 (20..100)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the length of the time in milliseconds
represented by the media of the packet. Supported value is
20 milliseconds. This object is not instantiated when the
object cvVoIPCallActiveCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 39 }
cvVoIPCallActiveChannels OBJECT-TYPE
SYNTAX Integer32 (1..6)
UNITS "channels"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the number of audio channels.
Supported value is 1. This object is not instantiated
when the object cvVoIPCallActiveCoderTypeRate is not equal
to gsmAmrNb enum."
::= { cvVoIPCallActiveEntry 40 }
cvVoIPCallActiveCoderMode OBJECT-TYPE
SYNTAX CvIlbcFrameMode
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the iLBC codec mode.
The value of this object is valid only if
cvVoIPCallActiveCoderTypeRate is equal to
'iLBC'."
REFERENCE
"RFC 3952: Section 5, for codec negotiation for iLBC mode."
::= { cvVoIPCallActiveEntry 41 }
cvVoIPCallActiveCallId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the call identifier
for the active VoIP leg of the call."
::= { cvVoIPCallActiveEntry 42 }
cvVoIPCallActiveCallReferenceId OBJECT-TYPE
SYNTAX CvcCallReferenceIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call may or may
not have a valid call reference ID (i.e. value greater than
zero), but in both cases, there will not be a video call entry
associated with it.
For a video call, the video-specific information is stored in a
call entry in cVideoSessionActive of CISCO-VIDEO-SESSION-MIB, in
which the call reference ID is also identified."
::= { cvVoIPCallActiveEntry 43 }
ccVoIPCallActivePolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object holds the policy name. It could be media
policy, DSCP policy etc."
::= { cvVoIPCallActiveEntry 44 }
cvVoIPCallActiveReversedDirectionPeerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object store the reversed direction peer address If the
address is not available, then it will have a length of zero.
If the call is ingress then it contains called number and if the
call is egress then it contains calling number."
::= { cvVoIPCallActiveEntry 45 }
cvVoIPCallActiveSessionId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the active session ID assigned by the
call manager to identify call legs that belong to the same call
session."
::= { cvVoIPCallActiveEntry 46 }
cvCallActiveDS0s OBJECT-TYPE
SYNTAX Gauge32
UNITS "interfaces"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of DS0 interfaces used for the
active calls."
::= { cvGatewayCallActive 3 }
cvCallActiveDS0sHighThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A high threshold used to determine when to generate the
cvdcActiveDS0sHighNotification. This object
represents the percentage of active DS0s in total number
of DS0s."
DEFVAL { 100 }
::= { cvGatewayCallActive 4 }
cvCallActiveDS0sLowThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A low threshold used to determine when to generate the
cvdcActiveDS0sLowNotification notification. This object
represents the percentage of active DS0s in total number
of DS0s."
DEFVAL { 0 }
::= { cvGatewayCallActive 5 }
cvCallActiveDS0sHighNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not cvdcActiveDS0sHighNotification
should be generated.
'true' : Indicates that the cvdcActiveDS0sHighNotification
generation is enabled.
'false': Indicates that cvdcActiveDS0sHighNotification
generation is disabled."
DEFVAL { false }
::= { cvGatewayCallActive 6 }
cvCallActiveDS0sLowNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether or not cvdcActiveDS0sLowNotification
should be generated.
'true' : Indicates that the cvdcActiveDS0sLowNotification
generation is enabled.
'false': Indicates that cvdcActiveDS0sLowNotification
generation is disabled."
DEFVAL { false }
::= { cvGatewayCallActive 7 }
-- Call Volume
cvCallVolume OBJECT IDENTIFIER
::= { cvGatewayCallActive 8 }
cvCallVolConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallVolConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the number of active
call connections for each call connection type
in the voice gateway."
::= { cvCallVolume 1 }
cvCallVolConnEntry OBJECT-TYPE
SYNTAX CvCallVolConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the cvCallVolConnTable indicates
number of active calls for a call connection type
in the voice gateway."
INDEX { cvCallVolConnIndex }
::= { cvCallVolConnTable 1 }
CvCallVolConnEntry ::= SEQUENCE {
cvCallVolConnIndex CvCallConnectionType,
cvCallVolConnActiveConnection Gauge32
}
cvCallVolConnIndex OBJECT-TYPE
SYNTAX CvCallConnectionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents index to the
cvCallVolConnTable."
::= { cvCallVolConnEntry 1 }
cvCallVolConnActiveConnection OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
active calls for a connection type
in the voice gateway."
::= { cvCallVolConnEntry 2 }
cvCallVolConnTotalActiveConnections OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
active call legs in the voice gateway."
::= { cvCallVolume 2 }
cvCallVolConnMaxCallConnectionLicenese OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the licensed call capacity
for a voice gateway. If the value is 0, no
licensing is done and the gateway can be
accomodate as many calls depending on its capability."
::= { cvCallVolume 3 }
-- Calls per Dial peer
cvCallVolPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallVolPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about
the usage of dialpeers configured in a
voice gateway."
::= { cvCallVolume 4 }
cvCallVolPeerEntry OBJECT-TYPE
SYNTAX CvCallVolPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a row in cvCallVolPeerTable
and corresponds to the information about a
dialpeer configured on the voice gateway."
AUGMENTS { cvPeerCfgEntry }
::= { cvCallVolPeerTable 1 }
CvCallVolPeerEntry ::= SEQUENCE {
cvCallVolPeerIncomingCalls Gauge32,
cvCallVolPeerOutgoingCalls Gauge32
}
cvCallVolPeerIncomingCalls OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
active calls that has selected the dialpeer
as an incoming dialpeer."
::= { cvCallVolPeerEntry 1 }
cvCallVolPeerOutgoingCalls OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
active calls that has selected the dialpeer
as an outgoing dialpeer."
::= { cvCallVolPeerEntry 2 }
-- Calls per IP Interface
cvCallVolIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallVolIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about
the usage of an IP interface in a voice
gateway for voice media calls. This table
has a sparse-dependent relationship with
ifTable. There exists an entry in this table,
for each of the entries in ifTable where ifType
is one of 'ethernetCsmacd' and 'softwareLoopback'."
::= { cvCallVolume 5 }
cvCallVolIfEntry OBJECT-TYPE
SYNTAX CvCallVolIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a row in cvCallVolIfTable
and corresponds to the information about an IP
interface in the voice gateway."
INDEX { ifIndex }
::= { cvCallVolIfTable 1 }
CvCallVolIfEntry ::= SEQUENCE {
cvCallVolMediaIncomingCalls Gauge32,
cvCallVolMediaOutgoingCalls Gauge32
}
cvCallVolMediaIncomingCalls OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
inbound active media calls through this IP
interface."
::= { cvCallVolIfEntry 1 }
cvCallVolMediaOutgoingCalls OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
outbound active media calls through the IP
interface."
::= { cvCallVolIfEntry 2 }
-- call-rate.
cvCallRateMonitor OBJECT IDENTIFIER
::= { cvGatewayCallActive 11 }
cvCallRateMonitorEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the state of call-monitoring.
A value of 'true' indicates that call-monitoring
is enabled. A value of 'false' indicates that
call-monitoring is disabled."
DEFVAL { true }
::= { cvCallRateMonitor 1 }
cvCallRateMonitorTime OBJECT-TYPE
SYNTAX Unsigned32 (1..12)
UNITS "five seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the interval for
which the gateway monitors the call-rate."
DEFVAL { 1 }
::= { cvCallRateMonitor 2 }
cvCallRate OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
calls handled by the gateway during the
monitored time."
::= { cvCallRateMonitor 3 }
cvCallRateHiWaterMark OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the high water mark
for the number of calls handled by the
gateway in an unit interval of
cvCallRateMonitorTime, from the time
the call-monitoring is enabled."
::= { cvCallRateMonitor 4 }
-- *********************************************************************
-- Voice Dial Control Gateway Call History Group
-- *********************************************************************
--
-- Voice over Telephony Call History Table
cvCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the voice extension to the call history table
of IETF Dial Control MIB. It contains voice encapsulation
call leg information such as voice packet statistics,
coder usage and end to end bandwidth of the call leg."
::= { cvGatewayCallHistory 1 }
cvCallHistoryEntry OBJECT-TYPE
SYNTAX CvCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single voice encapsulation
call leg.
The call leg entry is identified by using the same index
objects that are used by Call Active table of IETF Dial
Control MIB to identify the call.
An entry of this table is created when its associated call
history entry in the IETF Dial Control MIB is created and
the call history entry contains the call establishment to
a voice encapsulation peer.
The entry is deleted when its associated call active entry
in the IETF Dial Control MIB is deleted."
INDEX { cCallHistoryIndex }
::= { cvCallHistoryTable 1 }
CvCallHistoryEntry ::= SEQUENCE {
cvCallHistoryConnectionId CvcGUid,
cvCallHistoryTxDuration AbsoluteCounter32,
cvCallHistoryVoiceTxDuration AbsoluteCounter32,
cvCallHistoryFaxTxDuration AbsoluteCounter32,
cvCallHistoryCoderTypeRate CvcCoderTypeRate,
cvCallHistoryNoiseLevel Integer32,
cvCallHistoryACOMLevel Integer32,
cvCallHistorySessionTarget DisplayString,
cvCallHistoryImgPageCount AbsoluteCounter32,
cvCallHistoryCallingName SnmpAdminString,
cvCallHistoryCallerIDBlock TruthValue,
cvCallHistoryAccountCode SnmpAdminString,
cvCallHistoryCallId Unsigned32
}
cvCallHistoryConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global connection identifier for the
telephony leg, which was assigned to the call."
::= { cvCallHistoryEntry 1 }
cvCallHistoryTxDuration OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of Transmit path open from this peer to the
voice gateway for the call leg. This counter object will
lock at the maximum value which is approximately two
days."
::= { cvCallHistoryEntry 2 }
cvCallHistoryVoiceTxDuration OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration for this call leg. The Voice Utilization Rate
can be obtained by dividing this by
cvCallHistoryTXDuration object. This counter object will
lock at the maximum value which is approximately two
days."
::= { cvCallHistoryEntry 3 }
cvCallHistoryFaxTxDuration OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of fax transmitted from this peer to voice
gateway for this call leg. The FAX Utilization Rate can be
obtained by dividing this by cvCallHistoryTXDuration
object. This counter object will lock at the maximum
value which is approximately two days."
::= { cvCallHistoryEntry 4 }
cvCallHistoryCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit rate
of voice/fax compression to its associated call leg for
the call."
::= { cvCallHistoryEntry 5 }
cvCallHistoryNoiseLevel OBJECT-TYPE
SYNTAX Integer32 (-128..8)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object contains the average noise level for the call
leg."
::= { cvCallHistoryEntry 6 }
cvCallHistoryACOMLevel OBJECT-TYPE
SYNTAX Integer32 (-1..127)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object contains the average ACOM level for the call
leg. The value -1 indicates the level can not be
determined or level detection is disabled."
::= { cvCallHistoryEntry 7 }
cvCallHistorySessionTarget OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session target of the peer that
is used for the call leg via telephony interface."
::= { cvCallHistoryEntry 8 }
cvCallHistoryImgPageCount OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "pages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FAX related image pages are received or
transmitted via the peer for the call leg."
::= { cvCallHistoryEntry 9 }
cvCallHistoryCallingName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calling party name of the call. If the name is
not available, then it will have a length of zero."
::= { cvCallHistoryEntry 10 }
cvCallHistoryCallerIDBlock OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the caller ID feature
is blocked for this call."
::= { cvCallHistoryEntry 11 }
cvCallHistoryAccountCode OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the account code input to the call.
It could be used by down stream billing server.
The value of empty string indicates no account code input."
DEFVAL { "" }
::= { cvCallHistoryEntry 12 }
cvCallHistoryCallId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the call identifier for the
telephony leg, which was assigned to the call."
::= { cvCallHistoryEntry 13 }
-- Voice over IP Call History Table
cvVoIPCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the VoIP extension to the call history table
of IETF Dial Control MIB. It contains VoIP call leg
information about specific VoIP call destination and the
selected QoS for the call leg."
::= { cvGatewayCallHistory 2 }
cvVoIPCallHistoryEntry OBJECT-TYPE
SYNTAX CvVoIPCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single VoIP call leg.
The call leg entry is identified by using the same index
objects that are used by Call Active table of IETF Dial
Control MIB to identify the call.
An entry of this table is created when its associated call
history entry in the IETF Dial Control MIB is created and
the call history entry contains information for the call
establishment to the peer on the IP backbone via a voice
over IP peer.
The entry is deleted when its associated call history
entry in the IETF Dial Control MIB is deleted."
INDEX { cCallHistoryIndex }
::= { cvVoIPCallHistoryTable 1 }
CvVoIPCallHistoryEntry ::= SEQUENCE {
cvVoIPCallHistoryConnectionId CvcGUid,
cvVoIPCallHistoryRemoteIPAddress IpAddress,
cvVoIPCallHistoryRemoteUDPPort Integer32,
cvVoIPCallHistoryRoundTripDelay Gauge32,
cvVoIPCallHistorySelectedQoS QosService,
cvVoIPCallHistorySessionProtocol CvSessionProtocol,
cvVoIPCallHistorySessionTarget DisplayString,
cvVoIPCallHistoryOnTimeRvPlayout AbsoluteCounter32,
cvVoIPCallHistoryGapFillWithSilence AbsoluteCounter32,
cvVoIPCallHistoryGapFillWithPrediction AbsoluteCounter32,
cvVoIPCallHistoryGapFillWithInterpolation AbsoluteCounter32,
cvVoIPCallHistoryGapFillWithRedundancy AbsoluteCounter32,
cvVoIPCallHistoryHiWaterPlayoutDelay AbsoluteCounter32,
cvVoIPCallHistoryLoWaterPlayoutDelay Gauge32,
cvVoIPCallHistoryReceiveDelay Gauge32,
cvVoIPCallHistoryVADEnable TruthValue,
cvVoIPCallHistoryCoderTypeRate CvcCoderTypeRate,
cvVoIPCallHistoryIcpif Integer32,
cvVoIPCallHistoryLostPackets AbsoluteCounter32,
cvVoIPCallHistoryEarlyPackets AbsoluteCounter32,
cvVoIPCallHistoryLatePackets AbsoluteCounter32,
cvVoIPCallHistoryUsername SnmpAdminString,
cvVoIPCallHistoryProtocolCallId OCTET STRING,
cvVoIPCallHistoryRemSigIPAddrT InetAddressType,
cvVoIPCallHistoryRemSigIPAddr InetAddress,
cvVoIPCallHistoryRemSigPort Integer32,
cvVoIPCallHistoryRemMediaIPAddrT InetAddressType,
cvVoIPCallHistoryRemMediaIPAddr InetAddress,
cvVoIPCallHistoryRemMediaPort Integer32,
cvVoIPCallHistorySRTPEnable TruthValue,
cvVoIPCallHistoryFallbackIcpif Integer32,
cvVoIPCallHistoryFallbackLoss AbsoluteCounter32,
cvVoIPCallHistoryFallbackDelay Gauge32,
cvVoIPCallHistoryOctetAligned TruthValue,
cvVoIPCallHistoryBitRates CvAmrNbBitRateMode,
cvVoIPCallHistoryModeChgPeriod Integer32,
cvVoIPCallHistoryModeChgNeighbor TruthValue,
cvVoIPCallHistoryMaxPtime Integer32,
cvVoIPCallHistoryCRC TruthValue,
cvVoIPCallHistoryRobustSorting TruthValue,
cvVoIPCallHistoryEncap CvAmrNbRtpEncap,
cvVoIPCallHistoryInterleaving Integer32,
cvVoIPCallHistoryPtime Integer32,
cvVoIPCallHistoryChannels Integer32,
cvVoIPCallHistoryCoderMode CvIlbcFrameMode,
cvVoIPCallHistoryCallId Unsigned32,
cvVoIPCallHistoryCallReferenceId CvcCallReferenceIdOrZero,
cvVoIPCallHistorySessionId Unsigned32
}
cvVoIPCallHistoryConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global connection identifier for the
VoIP leg, which was assigned to the call."
::= { cvVoIPCallHistoryEntry 1 }
cvVoIPCallHistoryRemoteIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Remote system IP address for the call."
::= { cvVoIPCallHistoryEntry 2 }
cvVoIPCallHistoryRemoteUDPPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Remote system UDP listener port to which to transmit voice
packets for the call."
::= { cvVoIPCallHistoryEntry 3 }
cvVoIPCallHistoryRoundTripDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voice packet round trip delay between local and
the remote system on the IP backbone during the call."
::= { cvVoIPCallHistoryEntry 4 }
cvVoIPCallHistorySelectedQoS OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selected RSVP QoS for the call."
::= { cvVoIPCallHistoryEntry 5 }
cvVoIPCallHistorySessionProtocol OBJECT-TYPE
SYNTAX CvSessionProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session protocol to be used
for Internet call between local and remote router via
IP backbone."
::= { cvVoIPCallHistoryEntry 6 }
cvVoIPCallHistorySessionTarget OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the session target of the peer that
is used for the Voice over IP call."
::= { cvVoIPCallHistoryEntry 7 }
cvVoIPCallHistoryOnTimeRvPlayout OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice playout from data received on time for
this call. This plus the durations for the GapFills in the
following entries gives the Total Voice Playout Duration
for Active Voice.
This does not include duration for which no data was sent by the
Transmit end as voice signal, e.g., silence suppression
and fax signal. The On Time Playout Rate can be computed
by dividing this entry by the Total Voice Playout Duration.
This counter object will lock at the maximum value which
is approximately two days."
::= { cvVoIPCallHistoryEntry 8 }
cvVoIPCallHistoryGapFillWithSilence OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal replaced with signal played out
during silence due to voice data not received on time
(or lost) from voice gateway this call. This counter
object will lock at the maximum value which is
approximately two days."
::= { cvVoIPCallHistoryEntry 9 }
cvVoIPCallHistoryGapFillWithPrediction OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal played out with signal synthesized
from parameters or samples of data preceding in time due to
voice data not received on time (or lost) from voice gateway
for this call. An example of such playout is frame-erasure
or frame-concealment strategies in G.729 and G.723.1
compression algorithms. This counter object will lock at
the maximum value which is approximately two days."
::= { cvVoIPCallHistoryEntry 10 }
cvVoIPCallHistoryGapFillWithInterpolation OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal played out with signal synthesized
from parameters or samples of data preceding and following
in time due to voice data not received on time (or lost)
from voice gateway for this call. This counter object
will lock at the maximum value which is approximately two
days."
::= { cvVoIPCallHistoryEntry 11 }
cvVoIPCallHistoryGapFillWithRedundancy OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of voice signal played out with signal synthesized
from redundancy parameters available due to voice data not
received on time (or lost) from voice gateway for this call.
This counter object will lock at the maximum value which
is approximately two days."
::= { cvVoIPCallHistoryEntry 12 }
cvVoIPCallHistoryHiWaterPlayoutDelay OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high water mark Voice Playout FIFO Delay during
the voice call. This counter object will lock at the
maximum value which is approximately two days."
::= { cvVoIPCallHistoryEntry 13 }
cvVoIPCallHistoryLoWaterPlayoutDelay OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low water mark Voice Playout FIFO Delay during
the voice call."
::= { cvVoIPCallHistoryEntry 14 }
cvVoIPCallHistoryReceiveDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average Playout FIFO Delay plus the decoder delay
during the voice call."
::= { cvVoIPCallHistoryEntry 15 }
cvVoIPCallHistoryVADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The object indicates whether or not the VAD (Voice Activity
Detection) was enabled for the voice call."
::= { cvVoIPCallHistoryEntry 16 }
cvVoIPCallHistoryCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The negotiated coder rate. It specifies the transmit rate of
voice/fax compression to its associated call leg for the
call. This rate is different from the configuration rate
because of rate negotiation during the call."
::= { cvVoIPCallHistoryEntry 17 }
cvVoIPCallHistoryIcpif OBJECT-TYPE
SYNTAX Integer32 (-1..55)
UNITS "equipment impairment factor (eif)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Calculated Planning Impairment Factor (Icpif) of the
call that is associated to this call leg.
The value in this object is computed by the following
equation.
Icpif of the call =
Itotal (total impairment value) of the call - A
(Expectation Factor) in the cvVoIPPeerCfgExpectFactor of
the call leg associated peer.
A value of -1 implies that Icpif was not calculated and is
meaningless for this call."
REFERENCE
"[1] ITU G.113: Section 7.2 Impairment factors and the total
impairment value.
[2] ITU G.113: Sections 9 Considerations associated with
the Calculated Planning Impairment Factor (Icpif)."
::= { cvVoIPCallHistoryEntry 18 }
cvVoIPCallHistoryLostPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost voice packets during the call."
::= { cvVoIPCallHistoryEntry 19 }
cvVoIPCallHistoryEarlyPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received voice packets that are
arrived too early to store in jitter buffer
during the call."
::= { cvVoIPCallHistoryEntry 20 }
cvVoIPCallHistoryLatePackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received voice packets that are
arrived too late to playout with CODEC (Coder/Decoder)
during the call."
::= { cvVoIPCallHistoryEntry 21 }
cvVoIPCallHistoryUsername OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual identifier of the calling party (user) of the
call. If the username is not available, then the value of
this object will have a length of zero."
::= { cvVoIPCallHistoryEntry 22 }
cvVoIPCallHistoryProtocolCallId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol-specific call identifier for the VoIP call."
::= { cvVoIPCallHistoryEntry 23 }
cvVoIPCallHistoryRemSigIPAddrT OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of address contained in
the associated instance of cvVoIPCallHistoryRemSigIPAddr."
::= { cvVoIPCallHistoryEntry 24 }
cvVoIPCallHistoryRemSigIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote signalling IP address for the VoIP call."
::= { cvVoIPCallHistoryEntry 25 }
cvVoIPCallHistoryRemSigPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote signalling listener port to which to transmit
voice packets."
::= { cvVoIPCallHistoryEntry 26 }
cvVoIPCallHistoryRemMediaIPAddrT OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of address contained in
the associated instance of
cvVoIPCallHistoryRemMediaIPAddr."
::= { cvVoIPCallHistoryEntry 27 }
cvVoIPCallHistoryRemMediaIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote media end point IP address for the VoIP call."
::= { cvVoIPCallHistoryEntry 28 }
cvVoIPCallHistoryRemMediaPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote media end point listener port to which to transmit
voice packets."
::= { cvVoIPCallHistoryEntry 29 }
cvVoIPCallHistorySRTPEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the SRTP (Secured RTP)
was enabled for the voice call."
::= { cvVoIPCallHistoryEntry 30 }
cvVoIPCallHistoryFallbackIcpif OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Calculated Planning Impairment Factor (Icpif) of the
call that is associated to this call leg.
The value in this object is computed by the following
equation.
Icpif of the fallback probe =
Itotal (total impairment value) - configured fallback
(Expectation Factor).
A value of 0 implies that Icpif was not calculated and is
meaningless for this attempt."
::= { cvVoIPCallHistoryEntry 31 }
cvVoIPCallHistoryFallbackLoss OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FallbackLoss is the percentage of loss packets based on
the total packets sent."
::= { cvVoIPCallHistoryEntry 32 }
cvVoIPCallHistoryFallbackDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FallbackDelay is calculated as follows -
Take the sum of the round trips for all the probes,
divide by the number of probes,
and divide by two to get the one-way delay.
Then add in jitter_in or jiter_out,
which ever is higher."
::= { cvVoIPCallHistoryEntry 33 }
cvVoIPCallHistoryOctetAligned OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value true(1) octet align operation
is used, and if the value is false(2), bandwidth efficient
operation is used. This object is not instantiated when
the object cvVoIPCallHistoryCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 34 }
cvVoIPCallHistoryBitRates OBJECT-TYPE
SYNTAX CvAmrNbBitRateMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates modes of Bit rates.
This object is not instantiated when the object
cvVoIPCallHistoryCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 35 }
cvVoIPCallHistoryModeChgPeriod OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "frame-blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the interval (N frame-blocks) at which
codec mode changes are allowed. This object is not
instantiated when the object cvVoIPCallHistoryCoderTypeRate
is not equal to gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 36 }
cvVoIPCallHistoryModeChgNeighbor OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value of true(1), mode changes will be
made to only neighboring modes set to
cvVoIPCallHistoryBitRates object. If the value is false(2),
mode changes will be allowed to any modes set to
cvVoIPCallHistoryBitRates object. This object is not
instantiated when the object cvVoIPCallHistoryCoderTypeRate
is not equal to gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 37 }
cvVoIPCallHistoryMaxPtime OBJECT-TYPE
SYNTAX Integer32 (20..100)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the maximum amount of media that
can be encapsulated in a payload. Supported value is
20 msec. This object is not instantiated when the
object cvVoIPCallHistoryCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 38 }
cvVoIPCallHistoryCRC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value of true(1), frame CRC will be
included in the payload and if the value is false(2),
frame CRC will not be included in the payload.
This object is applicable only when RTP frame type
is octet aligned. This object is not instantiated when
the object cvVoIPCallHistoryCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 39 }
cvVoIPCallHistoryRobustSorting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the object has a value of true(1), payload employs
robust sorting and if the value is false(2), payload
does not employ robust sorting. This object is applicable
only when RTP frame type is octet aligned. This object
is not instantiated when the object
cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb
enum."
::= { cvVoIPCallHistoryEntry 40 }
cvVoIPCallHistoryEncap OBJECT-TYPE
SYNTAX CvAmrNbRtpEncap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the RTP encapsulation type.
Supported RTP encapsulation type is RFC3267.
This object is not instantiated when the object
cvVoIPCallHistoryCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 41 }
cvVoIPCallHistoryInterleaving OBJECT-TYPE
SYNTAX Integer32 (1..50)
UNITS "frame-blocks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the maximum number of frame-blocks
allowed in an interleaving group. It indicates that
frame-block level interleaving will be used for that
session. If this object is not set, interleaving
is not used. This object is applicable only when
RTP frame type is octet aligned. This object is not
instantiated when the object cvVoIPCallHistoryCoderTypeRate
is not equal to gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 42 }
cvVoIPCallHistoryPtime OBJECT-TYPE
SYNTAX Integer32 (20..100)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the length of the time in milliseconds
represented by the media of the packet. Supported value is
20 milliseconds. This object is not instantiated when the
object cvVoIPCallHistoryCoderTypeRate is not equal to
gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 43 }
cvVoIPCallHistoryChannels OBJECT-TYPE
SYNTAX Integer32 (1..6)
UNITS "channels"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the number of audio channels.
Supported value is 1. This object is not instantiated
when the object cvVoIPCallHistoryCoderTypeRate is not equal
to gsmAmrNb enum."
::= { cvVoIPCallHistoryEntry 44 }
cvVoIPCallHistoryCoderMode OBJECT-TYPE
SYNTAX CvIlbcFrameMode
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the iLBC mode.
The value of this object is valid only if
cvVoIPCallHistoryCoderTypeRate is equal to
'iLBC'."
REFERENCE
"RFC 3952: Section 5, for codec negotiation for iLBC mode."
::= { cvVoIPCallHistoryEntry 45 }
cvVoIPCallHistoryCallId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the call identifier for the
VoIP leg, which was assigned to the call."
::= { cvVoIPCallHistoryEntry 46 }
cvVoIPCallHistoryCallReferenceId OBJECT-TYPE
SYNTAX CvcCallReferenceIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call may or may
not have a valid call reference ID (i.e. value greater than
zero), but in both cases, there will not be a video call entry
associated with it.
For a video call, the video-specific information is stored in a
call entry in cVideoSessionActive of CISCO-VIDEO-SESSION-MIB, in
which the call reference ID is also identified."
::= { cvVoIPCallHistoryEntry 47 }
cvVoIPCallHistorySessionId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the session ID assigned by the call
manager to identify call legs that belong to the same call
session. This session ID (history) represents a completed call
session, whereas the active session ID
(cvVoIPCallActiveSessionId) represents an ongoing session."
::= { cvVoIPCallHistoryEntry 48 }
cvCallVolumeStatsHistory OBJECT IDENTIFIER
::= { cvGatewayCallHistory 3 }
cvCallRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents voice call rate measurement in various
interval lengths defined by the
CvCallVolumeStatsIntvlType object.
Each interval may contain one or more entries to allow for
detailed measurement to be collected."
::= { cvCallVolumeStatsHistory 1 }
cvCallRateStatsEntry OBJECT-TYPE
SYNTAX CvCallRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvCallRateStatsTable
This entry is created at the system initialization and is
updated at every epoch based on CvCallVolumeStatsIntvlType"
INDEX {
cvCallRateStatsIntvlDurUnits,
cvCallRateStatsIntvlDur
}
::= { cvCallRateStatsTable 1 }
CvCallRateStatsEntry ::= SEQUENCE {
cvCallRateStatsIntvlDurUnits CvCallVolumeStatsIntvlType,
cvCallRateStatsIntvlDur Unsigned32,
cvCallRateStatsMaxVal Unsigned32,
cvCallRateStatsAvgVal Unsigned32
}
cvCallRateStatsIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeStatsIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in Call Rate Table to select one among three
interval-tables.
The different types in this table are represented by
CvCallVolumeStatsIntvlType"
::= { cvCallRateStatsEntry 1 }
cvCallRateStatsIntvlDur OBJECT-TYPE
SYNTAX Unsigned32 (1..72)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to the different past periods
in given in interval of call rate table.
This range is 1-60 for Seconds and Minutes table
wherein 1-72 for hours table."
::= { cvCallRateStatsEntry 2 }
cvCallRateStatsMaxVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum calls per second
that occured for the given period for the given interval."
::= { cvCallRateStatsEntry 3 }
cvCallRateStatsAvgVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average calls per second
that occured for the given period for the given interval."
::= { cvCallRateStatsEntry 4 }
cvCallLegRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallLegRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cvCallLegRateStatsTable table represents voice call leg rate
measurement in various interval lengths defined by
the CvCallVolumeStatsIntvlType object.
Each interval may contain one or more entries to allow for
detailed measurement to be collected."
::= { cvCallVolumeStatsHistory 2 }
cvCallLegRateStatsEntry OBJECT-TYPE
SYNTAX CvCallLegRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvCallLegRateStatsTable
This entry is created at the system initialization and is
updated at every epoch based on CvCallVolumeStatsIntvlType"
INDEX {
cvCallLegRateStatsIntvlDurUnits,
cvCallLegRateStatsIntvlDur
}
::= { cvCallLegRateStatsTable 1 }
CvCallLegRateStatsEntry ::= SEQUENCE {
cvCallLegRateStatsIntvlDurUnits CvCallVolumeStatsIntvlType,
cvCallLegRateStatsIntvlDur Unsigned32,
cvCallLegRateStatsMaxVal Unsigned32,
cvCallLegRateStatsAvgVal Unsigned32
}
cvCallLegRateStatsIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeStatsIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in Call Leg Rate Table to select one among
three
interval-tables.
The different types in this table are represented by
CvCallVolumeStatsIntvlType"
::= { cvCallLegRateStatsEntry 1 }
cvCallLegRateStatsIntvlDur OBJECT-TYPE
SYNTAX Unsigned32 (1..72)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to the different past periods
in given in interval of call rate table.
This range is 1-60 for Seconds and Minutes table
wherein 1-72 for hours table."
::= { cvCallLegRateStatsEntry 2 }
cvCallLegRateStatsMaxVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "call-legs per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum call-legs per second
that occured for the given period for the given interval."
::= { cvCallLegRateStatsEntry 3 }
cvCallLegRateStatsAvgVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "call-legs per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average call-legs per second
that occured for the given period for the given interval."
::= { cvCallLegRateStatsEntry 4 }
cvActiveCallStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvActiveCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the active voice calls in various
interval lengths defined by the
CvCallVolumeStatsIntvlType object.
Each interval may contain one or more entries to allow for
detailed measurement to be collected."
::= { cvCallVolumeStatsHistory 3 }
cvActiveCallStatsEntry OBJECT-TYPE
SYNTAX CvActiveCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvActiveCallStatsTable
This entry is created at the system initialization and is
updated at every epoch based on CvCallVolumeStatsIntvlType"
INDEX {
cvActiveCallStatsIntvlDurUnits,
cvActiveCallStatsIntvlDur
}
::= { cvActiveCallStatsTable 1 }
CvActiveCallStatsEntry ::= SEQUENCE {
cvActiveCallStatsIntvlDurUnits CvCallVolumeStatsIntvlType,
cvActiveCallStatsIntvlDur Unsigned32,
cvActiveCallStatsMaxVal Unsigned32,
cvActiveCallStatsAvgVal Unsigned32
}
cvActiveCallStatsIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeStatsIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in Active Call Rate Table (con-current calls
table) to select one among three interval-tables.
The different types in this table are represented by
CvCallVolumeStatsIntvlType"
::= { cvActiveCallStatsEntry 1 }
cvActiveCallStatsIntvlDur OBJECT-TYPE
SYNTAX Unsigned32 (1..72)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to the different past periods
in given in interval of active call table.
This range is 1-60 for Seconds and Minutes table
wherein 1-72 for hours table."
::= { cvActiveCallStatsEntry 2 }
cvActiveCallStatsMaxVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of active call
that occured for the given period for the given interval."
::= { cvActiveCallStatsEntry 3 }
cvActiveCallStatsAvgVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average number of active calls
that occured for the given period for the given interval."
::= { cvActiveCallStatsEntry 4 }
cvCallDurationStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallDurationStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the number of calls below a specific
duration in various interval length defined by
the CvCallVolumeStatsIntvlType object.
The specific duration is configurable value of
cvCallDurationStatsThreshold object.
Each interval may contain one or more entries to allow for
detailed measurement to be collected."
::= { cvCallVolumeStatsHistory 4 }
cvCallDurationStatsEntry OBJECT-TYPE
SYNTAX CvCallDurationStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvCallDurationStatsTable
This entry is created at the system initialization and is
updated at every epoch based on CvCallVolumeStatsIntvlType"
INDEX {
cvCallDurationStatsIntvlDurUnits,
cvCallDurationStatsIntvlDur
}
::= { cvCallDurationStatsTable 1 }
CvCallDurationStatsEntry ::= SEQUENCE {
cvCallDurationStatsIntvlDurUnits CvCallVolumeStatsIntvlType,
cvCallDurationStatsIntvlDur Unsigned32,
cvCallDurationStatsMaxVal Unsigned32,
cvCallDurationStatsAvgVal Unsigned32
}
cvCallDurationStatsIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeStatsIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in Call Duration Table to select one among
three interval-tables.
The different types in this table are represented by
CvCallVolumeStatsIntvlType"
::= { cvCallDurationStatsEntry 1 }
cvCallDurationStatsIntvlDur OBJECT-TYPE
SYNTAX Unsigned32 (1..72)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to the different past periods
in given in interval of call Duration table.
This range is 1-60 for Seconds and Minutes table
wherein 1-72 for hours table."
::= { cvCallDurationStatsEntry 2 }
cvCallDurationStatsMaxVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of calls having a
duration which is below the threshold for the given interval."
::= { cvCallDurationStatsEntry 3 }
cvCallDurationStatsAvgVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average number of calls having a
duration which is below the threshold for the given interval."
::= { cvCallDurationStatsEntry 4 }
cvSipMsgRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvSipMsgRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the SIP message rate measurement in
various interval length defined by the
CvCallVolumeStatsIntvlType object.
Each interval may contain one or more entries to allow for
detailed measurement to be collected"
::= { cvCallVolumeStatsHistory 5 }
cvSipMsgRateStatsEntry OBJECT-TYPE
SYNTAX CvSipMsgRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvSipMsgRateStatsTable
This entry is created at the system initialization and is
updated at every epoch based on CvCallVolumeStatsIntvlType"
INDEX {
cvSipMsgRateStatsIntvlDurUnits,
cvSipMsgRateStatsIntvlDur
}
::= { cvSipMsgRateStatsTable 1 }
CvSipMsgRateStatsEntry ::= SEQUENCE {
cvSipMsgRateStatsIntvlDurUnits CvCallVolumeStatsIntvlType,
cvSipMsgRateStatsIntvlDur Unsigned32,
cvSipMsgRateStatsMaxVal Unsigned32,
cvSipMsgRateStatsAvgVal Unsigned32
}
cvSipMsgRateStatsIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeStatsIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in SIP Message Rate Table to select one
among three interval-tables.
The different types in this table are represented by
CvCallVolumeStatsIntvlType"
::= { cvSipMsgRateStatsEntry 1 }
cvSipMsgRateStatsIntvlDur OBJECT-TYPE
SYNTAX Unsigned32 (1..72)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to the different past
periods in given in interval of SIP message rate table.
This range is 1-60 for Seconds and Minutes table
wherein 1-72 for hours table."
::= { cvSipMsgRateStatsEntry 2 }
cvSipMsgRateStatsMaxVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "SIP messages per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum SIP messages per second that
is received for the given interval."
::= { cvSipMsgRateStatsEntry 3 }
cvSipMsgRateStatsAvgVal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "SIP messages per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average SIP messages per second that
is received for the given interval."
::= { cvSipMsgRateStatsEntry 4 }
cvCallRateWMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallRateWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents high watermarks achieved
by call rate in various interval length defined
by CvCallVolumeWMIntvlType.
Each interval may contain one or more entries to allow for
detailed measurement to be collected"
::= { cvCallVolumeStatsHistory 6 }
cvCallRateWMEntry OBJECT-TYPE
SYNTAX CvCallRateWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvCallRateWMTable
This entry is created at the system initialization and is
updated whenever
a) This entry is obsolete OR
b) A new/higher entry is available.
These entries are reinitialised/added/deleted if
cvCallVolumeWMTableSize is changed"
INDEX {
cvCallRateWMIntvlDurUnits,
cvCallRateWMIndex
}
::= { cvCallRateWMTable 1 }
CvCallRateWMEntry ::= SEQUENCE {
cvCallRateWMIntvlDurUnits CvCallVolumeWMIntvlType,
cvCallRateWMIndex Unsigned32,
cvCallRateWMValue Unsigned32,
cvCallRateWMts DateAndTime
}
cvCallRateWMIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeWMIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in call rate Water mark Table to select one
among four interval-tables.
The different types in this table are represented by
CvCallVolumeWMIntvlType"
::= { cvCallRateWMEntry 1 }
cvCallRateWMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to different peaks in
past period in call rate watermark table.
The number of watermarks entries stored for each table are
based on cvCallVolumeWMTableSize"
::= { cvCallRateWMEntry 2 }
cvCallRateWMValue OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates high watermark value achieved by the
calls per second for the given interval"
::= { cvCallRateWMEntry 3 }
cvCallRateWMts OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates date and Time when the high watermark
is achieved for calls per second for the given interval"
::= { cvCallRateWMEntry 4 }
cvCallLegRateWMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCallLegRateWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cvCallLegRateWMTable table represents high watermarks achieved
by call-leg rate in various interval length defined
by CvCallVolumeWMIntvlType.
Each interval may contain one or more entries to allow for
detailed measurement to be collected"
::= { cvCallVolumeStatsHistory 7 }
cvCallLegRateWMEntry OBJECT-TYPE
SYNTAX CvCallLegRateWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvCallLegRateWMTable
This entry is created at the system initialization and is
updated whenever
a) This entry is obsolete OR
b) A new/higher entry is available.
These entries are reinitialised/added/deleted if
cvCallVolumeWMTableSize is changed"
INDEX {
cvCallLegRateWMIntvlDurUnits,
cvCallLegRateWMIndex
}
::= { cvCallLegRateWMTable 1 }
CvCallLegRateWMEntry ::= SEQUENCE {
cvCallLegRateWMIntvlDurUnits CvCallVolumeWMIntvlType,
cvCallLegRateWMIndex Unsigned32,
cvCallLegRateWMValue Unsigned32,
cvCallLegRateWMts DateAndTime
}
cvCallLegRateWMIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeWMIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in call leg rate Water mark Table to select
one
among four interval-tables.
The different types in this table are represented by
CvCallVolumeWMIntvlType"
::= { cvCallLegRateWMEntry 1 }
cvCallLegRateWMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to different peaks in
past period in call leg rate watermark table.
The number of watermarks entries stored for each table are
based on cvCallVolumeWMTableSize"
::= { cvCallLegRateWMEntry 2 }
cvCallLegRateWMValue OBJECT-TYPE
SYNTAX Unsigned32
UNITS "call legs per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates high watermark value achieved by the
call legs per second for the given interval"
::= { cvCallLegRateWMEntry 3 }
cvCallLegRateWMts OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates date and time when the high watermark
is achieved for call-legs per second for the given interval"
::= { cvCallLegRateWMEntry 4 }
cvActiveCallWMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvActiveCallWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents high watermarks achieved
by active calls in various interval length defined
by CvCallVolumeWMIntvlType.
Each interval may contain one or more entries to allow
for detailed measurement to be collected."
::= { cvCallVolumeStatsHistory 8 }
cvActiveCallWMEntry OBJECT-TYPE
SYNTAX CvActiveCallWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvActiveCallWMTable
This entry is created at the system initialization and is
updated whenever
a) This entry is obsolete OR
b) A new/higher entry is available.
These entries are reinitialised/added/deleted if
cvCallVolumeWMTableSize is changed"
INDEX {
cvActiveCallWMIntvlDurUnits,
cvActiveCallWMIndex
}
::= { cvActiveCallWMTable 1 }
CvActiveCallWMEntry ::= SEQUENCE {
cvActiveCallWMIntvlDurUnits CvCallVolumeWMIntvlType,
cvActiveCallWMIndex Unsigned32,
cvActiveCallWMValue Unsigned32,
cvActiveCallWMts DateAndTime
}
cvActiveCallWMIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeWMIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in active call Water mark Table to select
one among four interval-tables.
The different types in this table are represented by
CvCallVolumeWMIntvlType"
::= { cvActiveCallWMEntry 1 }
cvActiveCallWMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to different peaks in
past period in acive call watermark table.
The number of watermarks entries stored for each table are
based on cvCallVolumeWMTableSize"
::= { cvActiveCallWMEntry 2 }
cvActiveCallWMValue OBJECT-TYPE
SYNTAX Unsigned32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates high watermark value achieved by the
active calls for the given interval"
::= { cvActiveCallWMEntry 3 }
cvActiveCallWMts OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates date and time when the high watermark
is achieved for active calls for the given interval"
::= { cvActiveCallWMEntry 4 }
cvSipMsgRateWMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvSipMsgRateWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents of high watermarks achieved
by SIP message rate in various interval length defined
by CvCallVolumeWMIntvlType.
Each interval may contain one or more entries to allow for
detailed measurement to be collected"
::= { cvCallVolumeStatsHistory 9 }
cvSipMsgRateWMEntry OBJECT-TYPE
SYNTAX CvSipMsgRateWMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a conceptual-row in cvSipMsgRateWMTable.
This entry is created at the system initialization and is
updated whenever
a) This entry is obsolete OR
b) A new/higher entry is available.
These entries are reinitialised/added/deleted if
cvCallVolumeWMTableSize is changed"
INDEX {
cvSipMsgRateWMIntvlDurUnits,
cvSipMsgRateWMIndex
}
::= { cvSipMsgRateWMTable 1 }
CvSipMsgRateWMEntry ::= SEQUENCE {
cvSipMsgRateWMIntvlDurUnits CvCallVolumeWMIntvlType,
cvSipMsgRateWMIndex Unsigned32,
cvSipMsgRateWMValue Unsigned32,
cvSipMsgRateWMts DateAndTime
}
cvSipMsgRateWMIntvlDurUnits OBJECT-TYPE
SYNTAX CvCallVolumeWMIntvlType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Object indexes in SIP Message rate Water mark Table to
select one among four interval-tables.
The different types in this table are represented by
CvCallVolumeWMIntvlType"
::= { cvSipMsgRateWMEntry 1 }
cvSipMsgRateWMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an index that references to different peaks in
past period in sip message rate watermark table.
The number of watermarks entries stored for each table are
based on cvCallVolumeWMTableSize"
::= { cvSipMsgRateWMEntry 2 }
cvSipMsgRateWMValue OBJECT-TYPE
SYNTAX Unsigned32
UNITS "SIP messages per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates high watermark value achieved by the
SIP messages per second for the given interval"
::= { cvSipMsgRateWMEntry 3 }
cvSipMsgRateWMts OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates date and time when the high watermark
is achieved for SIP messages per second for the given interval"
::= { cvSipMsgRateWMEntry 4 }
cvCallDurationStatsThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object specifies the thresold duration in seconds.
cvCallDurationStatsTable will monitor all the calls below this
threshold.
Decresing the value of the threshold will reset this table."
DEFVAL { 5 }
::= { cvCallVolumeStatsHistory 10 }
cvCallVolumeWMTableSize OBJECT-TYPE
SYNTAX Unsigned32 (3..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object specifies the number of entries the watermark table
will maintain.
This value will decide the number of elements in
cvCallRateWMTable,
cvCallLegRateWMTable, cvActiveCallWMTable and
cvSipMsgRateWMTable."
DEFVAL { 5 }
::= { cvCallVolumeStatsHistory 11 }
-- *********************************************************************
-- Notifications
-- *********************************************************************
cvdcMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoVoiceDialControlMIB 2 }
cvdcMIBNotifications OBJECT IDENTIFIER
::= { cvdcMIBNotificationPrefix 0 }
cvdcPoorQoVNotification NOTIFICATION-TYPE
OBJECTS {
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryIcpif,
cvVoIPCallHistoryRemoteIPAddress,
cCallHistoryCallOrigin,
cvCommonDcCallHistoryCoderTypeRate
}
STATUS deprecated
DESCRIPTION
"Poor quality of voice notification. A
cvdcPoorQoVNotification is sent at the call disconnection
time if the value of cvVoIPCallHistoryIcpif exceeds the
value of cvVoIPPeerCfgIcpif in the call associated peer."
::= { cvdcMIBNotifications 1 }
cvdcPoorQoVNotificationRev1 NOTIFICATION-TYPE
OBJECTS {
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryIcpif,
cvVoIPCallHistoryRemMediaIPAddrT,
cvVoIPCallHistoryRemMediaIPAddr,
cCallHistoryCallOrigin,
cvCommonDcCallHistoryCoderTypeRate
}
STATUS current
DESCRIPTION
"Poor quality of voice notification. A
cvdcPoorQoVNotificationRev1 is sent at the call
disconnection time if the value of cvVoIPCallHistoryIcpif
exceeds the value of cvVoIPPeerCfgIcpif in the call
associated peer."
::= { cvdcMIBNotifications 2 }
cvdcActiveDS0sHighNotification NOTIFICATION-TYPE
OBJECTS {
cvCallActiveDS0s,
cvCallActiveDS0sHighThreshold
}
STATUS current
DESCRIPTION
"The cvdcActiveDS0sHighNotification is sent when the
percentage of active DS0s exceeds
cvCallActiveDS0sHighThreshold value."
::= { cvdcMIBNotifications 3 }
cvdcActiveDS0sLowNotification NOTIFICATION-TYPE
OBJECTS {
cvCallActiveDS0s,
cvCallActiveDS0sLowThreshold
}
STATUS current
DESCRIPTION
"The cvdcActiveDS0sLowNotification is sent when the
percentage of active DS0s is less than
cvCallActiveDS0sLowThreshold value."
::= { cvdcMIBNotifications 4 }
cvdcFallbackNotification NOTIFICATION-TYPE
OBJECTS {
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryFallbackIcpif,
cvVoIPCallHistoryFallbackLoss,
cvVoIPCallHistoryFallbackDelay,
cvVoIPCallHistoryRemSigIPAddrT,
cvVoIPCallHistoryRemSigIPAddr,
cvVoIPCallHistoryRemMediaIPAddrT,
cvVoIPCallHistoryRemMediaIPAddr,
cCallHistoryCallOrigin,
cvCommonDcCallHistoryCoderTypeRate
}
STATUS current
DESCRIPTION
"This cvdcFallbackNotificaion is sent out,
when the destination
IP address of call fallback probe fails. This probe
generated for beginning of each call,
with exception of existing cached entry."
::= { cvdcMIBNotifications 5 }
cvdcPolicyViolationNotification NOTIFICATION-TYPE
OBJECTS {
ccVoIPCallActivePolicyName,
cvVoIPCallActiveReversedDirectionPeerAddress,
callActivePeerId,
callActivePeerAddress
}
STATUS current
DESCRIPTION
"Policy violation voice notification. A
cvdcPolicyViolationNotification is sent when the call is active
and has policy violation. It can be media policy violation or
DSCP policy violation."
::= { cvdcMIBNotifications 6 }
cvdcMIBConformance OBJECT IDENTIFIER
::= { ciscoVoiceDialControlMIB 3 }
cvdcMIBCompliances OBJECT IDENTIFIER
::= { cvdcMIBConformance 1 }
cvdcMIBGroups OBJECT IDENTIFIER
::= { cvdcMIBConformance 2 }
-- compliance statements
cvdcMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroup }
GROUP cvdcVoiceCfgGroup
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroup
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroup
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroup
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 1 }
cvdcMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev1 }
GROUP cvdcVoiceCfgGroupRev1
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroup
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroup
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev1
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 2 }
cvdcMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev2 }
GROUP cvdcVoiceCfgGroupRev1
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev1
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev1
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev1
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 3 }
cvdcMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev3 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev2
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev1
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev3
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 4 }
cvdcMIBComplianceRev4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev4 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev2
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev1
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev3
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 5 }
cvdcMIBComplianceRev5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev3 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev2
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev2
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev3
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 6 }
cvdcMIBComplianceRev6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev3 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev2
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev2
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev4
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 7 }
cvdcMIBComplianceRev7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev4 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev2
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev2
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev4
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 8 }
cvdcMIBComplianceRev8 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev3
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev2
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev4
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 9 }
cvdcMIBComplianceRev9 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev3
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev4
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 10 }
cvdcMIBComplianceRev10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev4
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev4
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 11 }
cvdcMIBComplianceRev11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev4
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev5
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 12 }
cvdcMIBComplianceRev12 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev5 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev5
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 13 }
cvdcMIBComplianceRev13 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
::= { cvdcMIBCompliances 14 }
cvdcMIBComplianceRev14 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcNotificationGroupRev3
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
::= { cvdcMIBCompliances 15 }
cvdcMIBComplianceRev15 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcNotificationGroupRev3
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
::= { cvdcMIBCompliances 16 }
cvdcMIBComplianceRev16 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE DIAL CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcNotificationGroupRev3
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
GROUP cvdcVoIPCfgIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec configuration."
GROUP cvVoIPCallIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec."
::= { cvdcMIBCompliances 17 }
cvdcMIBComplianceRev17 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the entities
that implement CISCO-VOICE-DIAL-CONTROL-MIB."
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcNotificationGroupRev3
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
GROUP cvdcVoIPCfgIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec configuration."
GROUP cvVoIPCallIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec."
GROUP cvCallGroupSup1
DESCRIPTION
"This group is mandatory to track voice-related active
calls and call-history via GSTN."
GROUP cvVoIPCallGroupSup1
DESCRIPTION
"This group is mandatory to track VoIP-related active
calls and call-history via IP network."
::= { cvdcMIBCompliances 18 }
cvdcMIBComplianceRev18 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the entities
that implement CISCO-VOICE-DIAL-CONTROL-MIB."
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcNotificationGroupRev3
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
GROUP cvdcVoIPCfgIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec configuration."
GROUP cvVoIPCallIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec."
GROUP cvCallGroupSup1
DESCRIPTION
"This group is mandatory to track voice-related active
calls and call-history via GSTN."
GROUP cvVoIPCallGroupSup1
DESCRIPTION
"This group is mandatory to track VoIP-related active
calls and call-history via IP network."
GROUP cvCallVolumeGroup
DESCRIPTION
"This group is mandatory to track per-protocol active
calls."
GROUP cvCallRateMonitorGroup
DESCRIPTION
"This group is mandatory to track call-rate."
::= { cvdcMIBCompliances 19 }
cvdcMIBComplianceRev19 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the entities
that implement CISCO-VOICE-DIAL-CONTROL-MIB."
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcNotificationGroupRev3
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
GROUP cvdcVoIPCfgIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec configuration."
GROUP cvVoIPCallIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec."
GROUP cvCallGroupSup1
DESCRIPTION
"This group is mandatory to track voice-related active
calls and call-history via GSTN."
GROUP cvVoIPCallGroupSup1
DESCRIPTION
"This group is mandatory to track VoIP-related active
calls and call-history via IP network."
GROUP cvCallVolumeGroup
DESCRIPTION
"This group is mandatory to track per-protocol active
calls."
GROUP cvCallRateMonitorGroup
DESCRIPTION
"This group is mandatory to track call-rate."
GROUP cvdcVoIPCfgISACGroup
DESCRIPTION
"This group is mandatory only for those platforms which support
iSAC codec configuration."
::= { cvdcMIBCompliances 20 }
cvdcMIBComplianceRev20 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the entities
that implement CISCO-VOICE-DIAL-CONTROL-MIB."
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
GROUP cvdcVoIPCfgIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec configuration."
GROUP cvVoIPCallIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec."
GROUP cvCallGroupSup1
DESCRIPTION
"This group is mandatory to track voice-related active
calls and call-history via GSTN."
GROUP cvCallVolumeGroup
DESCRIPTION
"This group is mandatory to track per-protocol active
calls."
GROUP cvCallRateMonitorGroup
DESCRIPTION
"This group is mandatory to track call-rate."
GROUP cvdcVoIPCfgISACGroup
DESCRIPTION
"This group is mandatory only for those platforms which support
iSAC codec configuration."
GROUP cvVoIPCallGroupSup2
DESCRIPTION
"This group supplements cvVoIPCallGroup to
provide the call identifier and policy for the VoIP
leg of the gateway call"
GROUP cvdcNotificationGroupRev4
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
::= { cvdcMIBCompliances 21 }
cvdcMIBComplianceRev21 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the entities
that implement CISCO-VOICE-DIAL-CONTROL-MIB."
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
GROUP cvdcVoIPCfgIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec configuration."
GROUP cvVoIPCallIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec."
GROUP cvCallGroupSup1
DESCRIPTION
"This group is mandatory to track voice-related active
calls and call-history via GSTN."
GROUP cvCallVolumeGroup
DESCRIPTION
"This group is mandatory to track per-protocol active
calls."
GROUP cvCallRateMonitorGroup
DESCRIPTION
"This group is mandatory to track call-rate."
GROUP cvdcVoIPCfgISACGroup
DESCRIPTION
"This group is mandatory only for those platforms which support
iSAC codec configuration."
GROUP cvVoIPCallGroupSup3
DESCRIPTION
"This group is mandatory for all VoIP calls. It supplements
cvVoIPCallGroup to provide the call identifier and policy for the VoIP
leg of the gateway call."
GROUP cvdcNotificationGroupRev4
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
::= { cvdcMIBCompliances 22 }
cvdcMIBComplianceRev22 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the entities
that implement CISCO-VOICE-DIAL-CONTROL-MIB."
MODULE -- this module
MANDATORY-GROUPS { cvdcGeneralCfgGroupRev6 }
GROUP cvdcVoiceCfgGroupRev2
DESCRIPTION
"This group is mandatory for voice dial control
configuration which is related to GSTN(General Switched
Telephony Network).
GSTN encompasses analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
GROUP cvdcVoIPCfgGroupRev4
DESCRIPTION
"This group is mandatory for VoIP dial control configuration
which is related to transmit voice packet via IP network."
GROUP cvCallGroupRev5
DESCRIPTION
"This group is mandatory for all voice related active call
and call history via GSTN."
GROUP cvVoIPCallGroupRev6
DESCRIPTION
"This group is mandatory for all VoIP related active call
and call history via IP network."
GROUP cvdcVoIPCfgAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec configuration."
GROUP cvVoIPCallAmrNbGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support GSM AMR-NB codec."
GROUP cvdcVoIPCfgIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec configuration."
GROUP cvVoIPCallIlbcGroup
DESCRIPTION
"This group is mandatory only for those platforms
which support iLBC codec."
GROUP cvCallGroupSup1
DESCRIPTION
"This group is mandatory to track voice-related active
calls and call-history via GSTN."
GROUP cvCallVolumeGroup
DESCRIPTION
"This group is mandatory to track per-protocol active
calls."
GROUP cvCallRateMonitorGroup
DESCRIPTION
"This group is mandatory to track call-rate."
GROUP cvdcVoIPCfgISACGroup
DESCRIPTION
"This group is mandatory only for those platforms which support
iSAC codec configuration."
GROUP cvVoIPCallGroupSup3
DESCRIPTION
"This group is mandatory for all VoIP calls. It supplements
cvVoIPCallGroup to provide the call identifier and policy for the VoIP
leg of the gateway call."
GROUP cvdcNotificationGroupRev4
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
GROUP cvdcCallVolumeStatsHistory
DESCRIPTION
"This group is mandatory to track voice related call volume
stats history"
::= { cvdcMIBCompliances 23 }
-- units of conformance
cvdcGeneralCfgGroup OBJECT-GROUP
OBJECTS {
cvGeneralPoorQoVNotificationEnable,
cvPeerCfgIfIndex,
cvPeerCfgType,
cvPeerCfgRowStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the general
Voice Gateway Call Dial Control configuration capability.
cvdcGeneralCfgGroup group is superseded by cvdcGeneralCfgGroupRev1."
::= { cvdcMIBGroups 1 }
cvdcVoiceCfgGroup OBJECT-GROUP
OBJECTS {
cvVoicePeerCfgSessionTarget,
cvVoicePeerCfgDialDigitsPrefix
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure.
cvdcVoiceCfgGroup group is superseded by cvdcVoiceCfgGroupRev1."
::= { cvdcMIBGroups 2 }
cvdcVoIPCfgGroup OBJECT-GROUP
OBJECTS {
cvVoIPPeerCfgSessionProtocol,
cvVoIPPeerCfgSessionTarget,
cvVoIPPeerCfgCoderRate,
cvVoIPPeerCfgFaxRate,
cvVoIPPeerCfgDesiredQoS,
cvVoIPPeerCfgMinAcceptableQoS,
cvVoIPPeerCfgVADEnable,
cvVoIPPeerCfgExpectFactor,
cvVoIPPeerCfgIcpif,
cvVoIPPeerCfgPoorQoVNotificationEnable,
cvVoIPPeerCfgUDPChecksumEnable,
cvVoIPPeerCfgIPPrecedence
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Dial Control
configuration capability.
cvdcVoIPCfgGroup group is superseded by cvdcVoIPCfgGroupRev1."
::= { cvdcMIBGroups 3 }
cvCallGroup OBJECT-GROUP
OBJECTS {
cvCallActiveConnectionId,
cvCallActiveTxDuration,
cvCallActiveVoiceTxDuration,
cvCallActiveFaxTxDuration,
cvCallActiveCoderTypeRate,
cvCallActiveNoiseLevel,
cvCallActiveACOMLevel,
cvCallActiveOutSignalLevel,
cvCallActiveInSignalLevel,
cvCallActiveERLLevel,
cvCallActiveSessionTarget,
cvCallHistoryConnectionId,
cvCallHistoryTxDuration,
cvCallHistoryVoiceTxDuration,
cvCallHistoryFaxTxDuration,
cvCallHistoryCoderTypeRate,
cvCallHistoryNoiseLevel,
cvCallHistoryACOMLevel,
cvCallHistorySessionTarget
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Call capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure.
cvCallGroup group is superseded by cvCallGroupRev1."
::= { cvdcMIBGroups 4 }
cvVoIPCallGroup OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveConnectionId,
cvVoIPCallActiveRemoteIPAddress,
cvVoIPCallActiveRemoteUDPPort,
cvVoIPCallActiveRoundTripDelay,
cvVoIPCallActiveSelectedQoS,
cvVoIPCallActiveSessionProtocol,
cvVoIPCallActiveSessionTarget,
cvVoIPCallActiveOnTimeRvPlayout,
cvVoIPCallActiveGapFillWithSilence,
cvVoIPCallActiveGapFillWithPrediction,
cvVoIPCallActiveGapFillWithInterpolation,
cvVoIPCallActiveGapFillWithRedundancy,
cvVoIPCallActiveHiWaterPlayoutDelay,
cvVoIPCallActiveLoWaterPlayoutDelay,
cvVoIPCallActiveReceiveDelay,
cvVoIPCallActiveVADEnable,
cvVoIPCallActiveCoderTypeRate,
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryRemoteIPAddress,
cvVoIPCallHistoryRemoteUDPPort,
cvVoIPCallHistoryRoundTripDelay,
cvVoIPCallHistorySelectedQoS,
cvVoIPCallHistorySessionProtocol,
cvVoIPCallHistorySessionTarget,
cvVoIPCallHistoryOnTimeRvPlayout,
cvVoIPCallHistoryGapFillWithSilence,
cvVoIPCallHistoryGapFillWithPrediction,
cvVoIPCallHistoryGapFillWithInterpolation,
cvVoIPCallHistoryGapFillWithRedundancy,
cvVoIPCallHistoryHiWaterPlayoutDelay,
cvVoIPCallHistoryLoWaterPlayoutDelay,
cvVoIPCallHistoryReceiveDelay,
cvVoIPCallHistoryVADEnable,
cvVoIPCallHistoryCoderTypeRate,
cvVoIPCallHistoryIcpif
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Call
capability.
cvVoIPCallGroup group is superseded by cvVoIPCallGroupRev1."
::= { cvdcMIBGroups 5 }
cvdcGeneralCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cvGeneralPoorQoVNotificationEnable,
cvPeerCfgIfIndex,
cvPeerCfgType,
cvPeerCfgRowStatus,
cvPeerCommonCfgIncomingDnisDigits,
cvPeerCommonCfgMaxConnections,
cvPeerCommonCfgApplicationName
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the general
Voice Gateway Call Dial Control configuration capability.
cvdcGeneralCfgGroupRev1 group is superseded by cvdcGeneralCfgGroupRev2."
::= { cvdcMIBGroups 6 }
cvdcVoiceCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cvVoicePeerCfgSessionTarget,
cvVoicePeerCfgDialDigitsPrefix,
cvVoicePeerCfgDIDCallEnable,
cvVoicePeerCfgCasGroup
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure.
cvdcVoiceCfgGroupRev1 group is superseded by cvdcVoiceCfgGroupRev2."
::= { cvdcMIBGroups 7 }
cvVoIPCallGroupRev1 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveConnectionId,
cvVoIPCallActiveRemoteIPAddress,
cvVoIPCallActiveRemoteUDPPort,
cvVoIPCallActiveRoundTripDelay,
cvVoIPCallActiveSelectedQoS,
cvVoIPCallActiveSessionProtocol,
cvVoIPCallActiveSessionTarget,
cvVoIPCallActiveOnTimeRvPlayout,
cvVoIPCallActiveGapFillWithSilence,
cvVoIPCallActiveGapFillWithPrediction,
cvVoIPCallActiveGapFillWithInterpolation,
cvVoIPCallActiveGapFillWithRedundancy,
cvVoIPCallActiveHiWaterPlayoutDelay,
cvVoIPCallActiveLoWaterPlayoutDelay,
cvVoIPCallActiveReceiveDelay,
cvVoIPCallActiveVADEnable,
cvVoIPCallActiveCoderTypeRate,
cvVoIPCallActiveLostPackets,
cvVoIPCallActiveLatePackets,
cvVoIPCallActiveEarlyPackets,
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryRemoteIPAddress,
cvVoIPCallHistoryRemoteUDPPort,
cvVoIPCallHistoryRoundTripDelay,
cvVoIPCallHistorySelectedQoS,
cvVoIPCallHistorySessionProtocol,
cvVoIPCallHistorySessionTarget,
cvVoIPCallHistoryOnTimeRvPlayout,
cvVoIPCallHistoryGapFillWithSilence,
cvVoIPCallHistoryGapFillWithPrediction,
cvVoIPCallHistoryGapFillWithInterpolation,
cvVoIPCallHistoryGapFillWithRedundancy,
cvVoIPCallHistoryHiWaterPlayoutDelay,
cvVoIPCallHistoryLoWaterPlayoutDelay,
cvVoIPCallHistoryReceiveDelay,
cvVoIPCallHistoryVADEnable,
cvVoIPCallHistoryCoderTypeRate,
cvVoIPCallHistoryIcpif,
cvVoIPCallHistoryLostPackets,
cvVoIPCallHistoryLatePackets,
cvVoIPCallHistoryEarlyPackets
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Call
capability.
cvVoIPCallGroupRev1 group is superseded by cvVoIPCallGroupRev2."
::= { cvdcMIBGroups 8 }
cvCallGroupRev1 OBJECT-GROUP
OBJECTS {
cvCallActiveConnectionId,
cvCallActiveTxDuration,
cvCallActiveVoiceTxDuration,
cvCallActiveFaxTxDuration,
cvCallActiveCoderTypeRate,
cvCallActiveNoiseLevel,
cvCallActiveACOMLevel,
cvCallActiveOutSignalLevel,
cvCallActiveInSignalLevel,
cvCallActiveERLLevel,
cvCallActiveSessionTarget,
cvCallActiveImgPageCount,
cvCallHistoryConnectionId,
cvCallHistoryTxDuration,
cvCallHistoryVoiceTxDuration,
cvCallHistoryFaxTxDuration,
cvCallHistoryCoderTypeRate,
cvCallHistoryNoiseLevel,
cvCallHistoryACOMLevel,
cvCallHistorySessionTarget,
cvCallHistoryImgPageCount
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure.
cvCallGroupRev1 group is superseded by cvCallGroupRev2."
::= { cvdcMIBGroups 9 }
cvdcGeneralCfgGroupRev2 OBJECT-GROUP
OBJECTS {
cvGeneralPoorQoVNotificationEnable,
cvPeerCfgIfIndex,
cvPeerCfgType,
cvPeerCfgRowStatus,
cvPeerCommonCfgIncomingDnisDigits,
cvPeerCommonCfgMaxConnections,
cvPeerCommonCfgApplicationName,
cvPeerCommonCfgPreference
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the general
Voice Gateway Call Dial Control configuration capability.
cvdcGeneralCfgGroupRev2 group is superseded by cvdcGeneralCfgGroupRev3."
::= { cvdcMIBGroups 10 }
cvdcVoIPCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cvVoIPPeerCfgSessionProtocol,
cvVoIPPeerCfgSessionTarget,
cvVoIPPeerCfgCoderRate,
cvVoIPPeerCfgFaxRate,
cvVoIPPeerCfgDesiredQoS,
cvVoIPPeerCfgMinAcceptableQoS,
cvVoIPPeerCfgVADEnable,
cvVoIPPeerCfgExpectFactor,
cvVoIPPeerCfgIcpif,
cvVoIPPeerCfgPoorQoVNotificationEnable,
cvVoIPPeerCfgUDPChecksumEnable,
cvVoIPPeerCfgIPPrecedence,
cvVoIPPeerCfgTechPrefix,
cvVoIPPeerCfgDigitRelay
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Dial Control
configuration capability.
cvdcVoIPCfgGroupRev1 group is superseded by cvdcVoIPCfgGroupRev2."
::= { cvdcMIBGroups 11 }
cvdcGeneralCfgGroupRev3 OBJECT-GROUP
OBJECTS {
cvGeneralPoorQoVNotificationEnable,
cvPeerCfgIfIndex,
cvPeerCfgType,
cvPeerCfgRowStatus,
cvPeerCommonCfgIncomingDnisDigits,
cvPeerCommonCfgMaxConnections,
cvPeerCommonCfgApplicationName,
cvPeerCommonCfgPreference,
cvPeerCommonCfgHuntStop
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the general
Voice Gateway Call Dial Control configuration capability.
cvdcGeneralCfgGroupRev3 group is superseded by cvdcGeneralCfgGroupRev4."
::= { cvdcMIBGroups 12 }
cvdcVoiceCfgGroupRev2 OBJECT-GROUP
OBJECTS {
cvVoicePeerCfgSessionTarget,
cvVoicePeerCfgDialDigitsPrefix,
cvVoicePeerCfgDIDCallEnable,
cvVoicePeerCfgCasGroup,
cvVoicePeerCfgRegisterE164,
cvVoicePeerCfgForwardDigits,
cvVoicePeerCfgEchoCancellerTest
}
STATUS current
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
::= { cvdcMIBGroups 13 }
cvdcVoIPCfgGroupRev2 OBJECT-GROUP
OBJECTS {
cvVoIPPeerCfgSessionProtocol,
cvVoIPPeerCfgSessionTarget,
cvVoIPPeerCfgCoderRate,
cvVoIPPeerCfgFaxRate,
cvVoIPPeerCfgDesiredQoS,
cvVoIPPeerCfgMinAcceptableQoS,
cvVoIPPeerCfgVADEnable,
cvVoIPPeerCfgExpectFactor,
cvVoIPPeerCfgIcpif,
cvVoIPPeerCfgPoorQoVNotificationEnable,
cvVoIPPeerCfgUDPChecksumEnable,
cvVoIPPeerCfgIPPrecedence,
cvVoIPPeerCfgTechPrefix,
cvVoIPPeerCfgDigitRelay,
cvVoIPPeerCfgCoderBytes,
cvVoIPPeerCfgFaxBytes,
cvVoIPPeerCfgInBandSignaling
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Dial Control
configuration capability.
cvdcVoIPCfgGroupRev2 group is superseded by cvdcVoIPCfgGroupRev3."
::= { cvdcMIBGroups 14 }
cvVoIPCallGroupRev3 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveConnectionId,
cvVoIPCallActiveRemoteIPAddress,
cvVoIPCallActiveRemoteUDPPort,
cvVoIPCallActiveRoundTripDelay,
cvVoIPCallActiveSelectedQoS,
cvVoIPCallActiveSessionProtocol,
cvVoIPCallActiveSessionTarget,
cvVoIPCallActiveOnTimeRvPlayout,
cvVoIPCallActiveGapFillWithSilence,
cvVoIPCallActiveGapFillWithPrediction,
cvVoIPCallActiveGapFillWithInterpolation,
cvVoIPCallActiveGapFillWithRedundancy,
cvVoIPCallActiveHiWaterPlayoutDelay,
cvVoIPCallActiveLoWaterPlayoutDelay,
cvVoIPCallActiveReceiveDelay,
cvVoIPCallActiveLostPackets,
cvVoIPCallActiveLatePackets,
cvVoIPCallActiveEarlyPackets,
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryRemoteIPAddress,
cvVoIPCallHistoryRemoteUDPPort,
cvVoIPCallHistoryRoundTripDelay,
cvVoIPCallHistorySelectedQoS,
cvVoIPCallHistorySessionProtocol,
cvVoIPCallHistorySessionTarget,
cvVoIPCallHistoryOnTimeRvPlayout,
cvVoIPCallHistoryGapFillWithSilence,
cvVoIPCallHistoryGapFillWithPrediction,
cvVoIPCallHistoryGapFillWithInterpolation,
cvVoIPCallHistoryGapFillWithRedundancy,
cvVoIPCallHistoryHiWaterPlayoutDelay,
cvVoIPCallHistoryLoWaterPlayoutDelay,
cvVoIPCallHistoryReceiveDelay,
cvVoIPCallHistoryIcpif,
cvVoIPCallHistoryLostPackets,
cvVoIPCallHistoryLatePackets,
cvVoIPCallHistoryEarlyPackets
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Call
capability.
cvVoIPCallGroupRev3 group is superseded by cvVoIPCallGroupRev4."
::= { cvdcMIBGroups 15 }
cvdcNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { cvdcPoorQoVNotification }
STATUS deprecated
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB
cvdcNotificationGroup group is superseded by cvdcNotificationGroupRev1."
::= { cvdcMIBGroups 16 }
cvCallGroupRev2 OBJECT-GROUP
OBJECTS {
cvCallActiveConnectionId,
cvCallActiveTxDuration,
cvCallActiveVoiceTxDuration,
cvCallActiveFaxTxDuration,
cvCallActiveCoderTypeRate,
cvCallActiveNoiseLevel,
cvCallActiveACOMLevel,
cvCallActiveOutSignalLevel,
cvCallActiveInSignalLevel,
cvCallActiveERLLevel,
cvCallActiveSessionTarget,
cvCallActiveImgPageCount,
cvCallActiveCallingName,
cvCallActiveCallerIDBlock,
cvCallActiveEcanReflectorLocation,
cvCallHistoryConnectionId,
cvCallHistoryTxDuration,
cvCallHistoryVoiceTxDuration,
cvCallHistoryFaxTxDuration,
cvCallHistoryCoderTypeRate,
cvCallHistoryNoiseLevel,
cvCallHistoryACOMLevel,
cvCallHistorySessionTarget,
cvCallHistoryImgPageCount,
cvCallHistoryCallingName,
cvCallHistoryCallerIDBlock
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure.
cvCallGroupRev2 group is superseded by cvCallGroupRev3."
::= { cvdcMIBGroups 17 }
cvdcGeneralCfgGroupRev4 OBJECT-GROUP
OBJECTS {
cvGeneralPoorQoVNotificationEnable,
cvPeerCfgIfIndex,
cvPeerCfgType,
cvPeerCfgRowStatus,
cvPeerCommonCfgIncomingDnisDigits,
cvPeerCommonCfgMaxConnections,
cvPeerCommonCfgApplicationName,
cvPeerCommonCfgPreference,
cvPeerCommonCfgHuntStop,
cvPeerCommonCfgDnisMappingName,
cvPeerCommonCfgSourceCarrierId,
cvPeerCommonCfgTargetCarrierId,
cvPeerCommonCfgSourceTrunkGrpLabel,
cvPeerCommonCfgTargetTrunkGrpLabel
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the general
Voice Gateway Call Dial Control configuration
capability.
cvdcGeneralCfgGroupRev4 group is superseded by cvdcGeneralCfgGroupRev5."
::= { cvdcMIBGroups 18 }
cvVoIPCallGroupRev4 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveConnectionId,
cvVoIPCallActiveRoundTripDelay,
cvVoIPCallActiveSelectedQoS,
cvVoIPCallActiveSessionProtocol,
cvVoIPCallActiveSessionTarget,
cvVoIPCallActiveOnTimeRvPlayout,
cvVoIPCallActiveGapFillWithSilence,
cvVoIPCallActiveGapFillWithPrediction,
cvVoIPCallActiveGapFillWithInterpolation,
cvVoIPCallActiveGapFillWithRedundancy,
cvVoIPCallActiveHiWaterPlayoutDelay,
cvVoIPCallActiveLoWaterPlayoutDelay,
cvVoIPCallActiveReceiveDelay,
cvVoIPCallActiveLostPackets,
cvVoIPCallActiveLatePackets,
cvVoIPCallActiveEarlyPackets,
cvVoIPCallActiveUsername,
cvVoIPCallActiveProtocolCallId,
cvVoIPCallActiveRemSigIPAddrT,
cvVoIPCallActiveRemSigIPAddr,
cvVoIPCallActiveRemSigPort,
cvVoIPCallActiveRemMediaIPAddrT,
cvVoIPCallActiveRemMediaIPAddr,
cvVoIPCallActiveRemMediaPort,
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryRoundTripDelay,
cvVoIPCallHistorySelectedQoS,
cvVoIPCallHistorySessionProtocol,
cvVoIPCallHistorySessionTarget,
cvVoIPCallHistoryOnTimeRvPlayout,
cvVoIPCallHistoryGapFillWithSilence,
cvVoIPCallHistoryGapFillWithPrediction,
cvVoIPCallHistoryGapFillWithInterpolation,
cvVoIPCallHistoryGapFillWithRedundancy,
cvVoIPCallHistoryHiWaterPlayoutDelay,
cvVoIPCallHistoryLoWaterPlayoutDelay,
cvVoIPCallHistoryReceiveDelay,
cvVoIPCallHistoryIcpif,
cvVoIPCallHistoryLostPackets,
cvVoIPCallHistoryLatePackets,
cvVoIPCallHistoryEarlyPackets,
cvVoIPCallHistoryUsername,
cvVoIPCallHistoryProtocolCallId,
cvVoIPCallHistoryRemSigIPAddrT,
cvVoIPCallHistoryRemSigIPAddr,
cvVoIPCallHistoryRemSigPort,
cvVoIPCallHistoryRemMediaIPAddrT,
cvVoIPCallHistoryRemMediaIPAddr,
cvVoIPCallHistoryRemMediaPort
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Call
capability.
cvVoIPCallGroupRev4 group is superseded by cvVoIPCallGroupRev5."
::= { cvdcMIBGroups 19 }
cvdcNotificationGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS { cvdcPoorQoVNotificationRev1 }
STATUS deprecated
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB
cvdcNotificationGroupRev1 group is superseded by cvdcNotificationGroupRev2."
::= { cvdcMIBGroups 20 }
cvdcVoIPCfgGroupRev3 OBJECT-GROUP
OBJECTS {
cvVoIPPeerCfgSessionProtocol,
cvVoIPPeerCfgSessionTarget,
cvVoIPPeerCfgCoderRate,
cvVoIPPeerCfgFaxRate,
cvVoIPPeerCfgDesiredQoS,
cvVoIPPeerCfgMinAcceptableQoS,
cvVoIPPeerCfgVADEnable,
cvVoIPPeerCfgExpectFactor,
cvVoIPPeerCfgIcpif,
cvVoIPPeerCfgPoorQoVNotificationEnable,
cvVoIPPeerCfgUDPChecksumEnable,
cvVoIPPeerCfgIPPrecedence,
cvVoIPPeerCfgTechPrefix,
cvVoIPPeerCfgDigitRelay,
cvVoIPPeerCfgCoderBytes,
cvVoIPPeerCfgFaxBytes,
cvVoIPPeerCfgInBandSignaling
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Dial Control
configuration capability.
cvdcVoIPCfgGroupRev3 group is superseded by cvdcVoIPCfgGroupRev4."
::= { cvdcMIBGroups 21 }
cvdcGeneralCfgGroupRev5 OBJECT-GROUP
OBJECTS {
cvGeneralPoorQoVNotificationEnable,
cvPeerCfgIfIndex,
cvPeerCfgType,
cvPeerCfgRowStatus,
cvPeerCfgPeerType,
cvPeerCommonCfgIncomingDnisDigits,
cvPeerCommonCfgMaxConnections,
cvPeerCommonCfgApplicationName,
cvPeerCommonCfgPreference,
cvPeerCommonCfgHuntStop,
cvPeerCommonCfgDnisMappingName,
cvPeerCommonCfgSourceCarrierId,
cvPeerCommonCfgTargetCarrierId,
cvPeerCommonCfgSourceTrunkGrpLabel,
cvPeerCommonCfgTargetTrunkGrpLabel
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the general
Voice Gateway Call Dial Control configuration
capability.
cvdcGeneralCfgGroupRev5 group is superseded by cvdcGeneralCfgGroupRev6."
::= { cvdcMIBGroups 22 }
cvdcVoIPCfgGroupRev4 OBJECT-GROUP
OBJECTS {
cvVoIPPeerCfgSessionProtocol,
cvVoIPPeerCfgSessionTarget,
cvVoIPPeerCfgCoderRate,
cvVoIPPeerCfgFaxRate,
cvVoIPPeerCfgDesiredQoS,
cvVoIPPeerCfgMinAcceptableQoS,
cvVoIPPeerCfgVADEnable,
cvVoIPPeerCfgExpectFactor,
cvVoIPPeerCfgIcpif,
cvVoIPPeerCfgPoorQoVNotificationEnable,
cvVoIPPeerCfgUDPChecksumEnable,
cvVoIPPeerCfgIPPrecedence,
cvVoIPPeerCfgTechPrefix,
cvVoIPPeerCfgDigitRelay,
cvVoIPPeerCfgCoderBytes,
cvVoIPPeerCfgFaxBytes,
cvVoIPPeerCfgInBandSignaling,
cvVoIPPeerCfgMediaSetting,
cvVoIPPeerCfgDesiredQoSVideo,
cvVoIPPeerCfgMinAcceptableQoSVideo,
cvVoIPPeerCfgRedirectip2ip,
cvVoIPPeerCfgDSCPPolicyNotificationEnable,
cvVoIPPeerCfgMediaPolicyNotificationEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing the VoIP Dial Control
configuration capability."
::= { cvdcMIBGroups 23 }
cvCallGroupRev3 OBJECT-GROUP
OBJECTS {
cvCallActiveConnectionId,
cvCallActiveTxDuration,
cvCallActiveVoiceTxDuration,
cvCallActiveFaxTxDuration,
cvCallActiveCoderTypeRate,
cvCallActiveNoiseLevel,
cvCallActiveACOMLevel,
cvCallActiveOutSignalLevel,
cvCallActiveInSignalLevel,
cvCallActiveERLLevel,
cvCallActiveSessionTarget,
cvCallActiveImgPageCount,
cvCallActiveCallingName,
cvCallActiveCallerIDBlock,
cvCallActiveEcanReflectorLocation,
cvCallActiveAccountCode,
cvCallHistoryConnectionId,
cvCallHistoryTxDuration,
cvCallHistoryVoiceTxDuration,
cvCallHistoryFaxTxDuration,
cvCallHistoryCoderTypeRate,
cvCallHistoryNoiseLevel,
cvCallHistoryACOMLevel,
cvCallHistorySessionTarget,
cvCallHistoryImgPageCount,
cvCallHistoryCallingName,
cvCallHistoryCallerIDBlock,
cvCallHistoryAccountCode,
cvCallActiveERLLevelRev1
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure.
cvCallGroupRev3 group is superseded by cvCallGroupRev4."
::= { cvdcMIBGroups 24 }
cvCallGroupRev4 OBJECT-GROUP
OBJECTS {
cvCallActiveConnectionId,
cvCallActiveTxDuration,
cvCallActiveVoiceTxDuration,
cvCallActiveFaxTxDuration,
cvCallActiveCoderTypeRate,
cvCallActiveNoiseLevel,
cvCallActiveACOMLevel,
cvCallActiveOutSignalLevel,
cvCallActiveInSignalLevel,
cvCallActiveSessionTarget,
cvCallActiveImgPageCount,
cvCallActiveCallingName,
cvCallActiveCallerIDBlock,
cvCallActiveEcanReflectorLocation,
cvCallActiveAccountCode,
cvCallHistoryConnectionId,
cvCallHistoryTxDuration,
cvCallHistoryVoiceTxDuration,
cvCallHistoryFaxTxDuration,
cvCallHistoryCoderTypeRate,
cvCallHistoryNoiseLevel,
cvCallHistoryACOMLevel,
cvCallHistorySessionTarget,
cvCallHistoryImgPageCount,
cvCallHistoryCallingName,
cvCallHistoryCallerIDBlock,
cvCallHistoryAccountCode,
cvCallActiveERLLevelRev1
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure.
cvCallGroupRev4 group is superseded by cvCallGroupRev5."
::= { cvdcMIBGroups 25 }
cvVoIPCallGroupRev5 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveConnectionId,
cvVoIPCallActiveRoundTripDelay,
cvVoIPCallActiveSelectedQoS,
cvVoIPCallActiveSessionProtocol,
cvVoIPCallActiveSessionTarget,
cvVoIPCallActiveOnTimeRvPlayout,
cvVoIPCallActiveGapFillWithSilence,
cvVoIPCallActiveGapFillWithPrediction,
cvVoIPCallActiveGapFillWithInterpolation,
cvVoIPCallActiveGapFillWithRedundancy,
cvVoIPCallActiveHiWaterPlayoutDelay,
cvVoIPCallActiveLoWaterPlayoutDelay,
cvVoIPCallActiveReceiveDelay,
cvVoIPCallActiveLostPackets,
cvVoIPCallActiveLatePackets,
cvVoIPCallActiveEarlyPackets,
cvVoIPCallActiveUsername,
cvVoIPCallActiveProtocolCallId,
cvVoIPCallActiveRemSigIPAddrT,
cvVoIPCallActiveRemSigIPAddr,
cvVoIPCallActiveRemSigPort,
cvVoIPCallActiveRemMediaIPAddrT,
cvVoIPCallActiveRemMediaIPAddr,
cvVoIPCallActiveRemMediaPort,
cvVoIPCallActiveSRTPEnable,
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryRoundTripDelay,
cvVoIPCallHistorySelectedQoS,
cvVoIPCallHistorySessionProtocol,
cvVoIPCallHistorySessionTarget,
cvVoIPCallHistoryOnTimeRvPlayout,
cvVoIPCallHistoryGapFillWithSilence,
cvVoIPCallHistoryGapFillWithPrediction,
cvVoIPCallHistoryGapFillWithInterpolation,
cvVoIPCallHistoryGapFillWithRedundancy,
cvVoIPCallHistoryHiWaterPlayoutDelay,
cvVoIPCallHistoryLoWaterPlayoutDelay,
cvVoIPCallHistoryReceiveDelay,
cvVoIPCallHistoryIcpif,
cvVoIPCallHistoryLostPackets,
cvVoIPCallHistoryLatePackets,
cvVoIPCallHistoryEarlyPackets,
cvVoIPCallHistoryUsername,
cvVoIPCallHistoryProtocolCallId,
cvVoIPCallHistoryRemSigIPAddrT,
cvVoIPCallHistoryRemSigIPAddr,
cvVoIPCallHistoryRemSigPort,
cvVoIPCallHistoryRemMediaIPAddrT,
cvVoIPCallHistoryRemMediaIPAddr,
cvVoIPCallHistoryRemMediaPort,
cvVoIPCallHistorySRTPEnable
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the VoIP Call
capability.
cvVoIPCallGroupRev5 group is superseded by cvVoIPCallGroupRev6."
::= { cvdcMIBGroups 26 }
cvCallGroupRev5 OBJECT-GROUP
OBJECTS {
cvCallActiveDS0s,
cvCallActiveDS0sHighThreshold,
cvCallActiveDS0sLowThreshold,
cvCallActiveDS0sHighNotifyEnable,
cvCallActiveDS0sLowNotifyEnable,
cvCallActiveConnectionId,
cvCallActiveTxDuration,
cvCallActiveVoiceTxDuration,
cvCallActiveFaxTxDuration,
cvCallActiveCoderTypeRate,
cvCallActiveNoiseLevel,
cvCallActiveACOMLevel,
cvCallActiveOutSignalLevel,
cvCallActiveInSignalLevel,
cvCallActiveSessionTarget,
cvCallActiveImgPageCount,
cvCallActiveCallingName,
cvCallActiveCallerIDBlock,
cvCallActiveEcanReflectorLocation,
cvCallActiveAccountCode,
cvCallHistoryConnectionId,
cvCallHistoryTxDuration,
cvCallHistoryVoiceTxDuration,
cvCallHistoryFaxTxDuration,
cvCallHistoryCoderTypeRate,
cvCallHistoryNoiseLevel,
cvCallHistoryACOMLevel,
cvCallHistorySessionTarget,
cvCallHistoryImgPageCount,
cvCallHistoryCallingName,
cvCallHistoryCallerIDBlock,
cvCallHistoryAccountCode,
cvCallActiveERLLevelRev1
}
STATUS current
DESCRIPTION
"A collection of objects providing the GSTN (General
Switched Telephony Network Voice Dial Control configuration
capability.
GSTN (General Switched Telephony Network), which is
supposed to encompass analog, ISDN, Cellular - essentially
anything circuit switched over the TDM infrastructure."
::= { cvdcMIBGroups 27 }
cvdcNotificationGroupRev2 NOTIFICATION-GROUP
NOTIFICATIONS {
cvdcPoorQoVNotificationRev1,
cvdcActiveDS0sHighNotification,
cvdcActiveDS0sLowNotification
}
STATUS deprecated
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB
cvdcNotificationGroupRev2 group is superseded by cvdcNotificationGroupRev3."
::= { cvdcMIBGroups 28 }
cvVoIPCallGroupRev6 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveConnectionId,
cvVoIPCallActiveRoundTripDelay,
cvVoIPCallActiveSelectedQoS,
cvVoIPCallActiveSessionProtocol,
cvVoIPCallActiveSessionTarget,
cvVoIPCallActiveOnTimeRvPlayout,
cvVoIPCallActiveGapFillWithSilence,
cvVoIPCallActiveGapFillWithPrediction,
cvVoIPCallActiveGapFillWithInterpolation,
cvVoIPCallActiveGapFillWithRedundancy,
cvVoIPCallActiveHiWaterPlayoutDelay,
cvVoIPCallActiveLoWaterPlayoutDelay,
cvVoIPCallActiveReceiveDelay,
cvVoIPCallActiveLostPackets,
cvVoIPCallActiveLatePackets,
cvVoIPCallActiveEarlyPackets,
cvVoIPCallActiveUsername,
cvVoIPCallActiveProtocolCallId,
cvVoIPCallActiveRemSigIPAddrT,
cvVoIPCallActiveRemSigIPAddr,
cvVoIPCallActiveRemSigPort,
cvVoIPCallActiveRemMediaIPAddrT,
cvVoIPCallActiveRemMediaIPAddr,
cvVoIPCallActiveRemMediaPort,
cvVoIPCallActiveSRTPEnable,
cvVoIPCallHistoryConnectionId,
cvVoIPCallHistoryRoundTripDelay,
cvVoIPCallHistorySelectedQoS,
cvVoIPCallHistorySessionProtocol,
cvVoIPCallHistorySessionTarget,
cvVoIPCallHistoryOnTimeRvPlayout,
cvVoIPCallHistoryGapFillWithSilence,
cvVoIPCallHistoryGapFillWithPrediction,
cvVoIPCallHistoryGapFillWithInterpolation,
cvVoIPCallHistoryGapFillWithRedundancy,
cvVoIPCallHistoryHiWaterPlayoutDelay,
cvVoIPCallHistoryLoWaterPlayoutDelay,
cvVoIPCallHistoryReceiveDelay,
cvVoIPCallHistoryIcpif,
cvVoIPCallHistoryLostPackets,
cvVoIPCallHistoryLatePackets,
cvVoIPCallHistoryEarlyPackets,
cvVoIPCallHistoryUsername,
cvVoIPCallHistoryProtocolCallId,
cvVoIPCallHistoryRemSigIPAddrT,
cvVoIPCallHistoryRemSigIPAddr,
cvVoIPCallHistoryRemSigPort,
cvVoIPCallHistoryRemMediaIPAddrT,
cvVoIPCallHistoryRemMediaIPAddr,
cvVoIPCallHistoryRemMediaPort,
cvVoIPCallHistorySRTPEnable,
cvVoIPCallHistoryFallbackIcpif,
cvVoIPCallHistoryFallbackLoss,
cvVoIPCallHistoryFallbackDelay
}
STATUS current
DESCRIPTION
"A collection of objects providing the VoIP Call
capability."
::= { cvdcMIBGroups 29 }
cvdcGeneralCfgGroupRev6 OBJECT-GROUP
OBJECTS {
cvGeneralPoorQoVNotificationEnable,
cvGeneralFallbackNotificationEnable,
cvPeerCfgIfIndex,
cvPeerCfgType,
cvPeerCfgRowStatus,
cvPeerCfgPeerType,
cvPeerCommonCfgIncomingDnisDigits,
cvPeerCommonCfgMaxConnections,
cvPeerCommonCfgApplicationName,
cvPeerCommonCfgPreference,
cvPeerCommonCfgHuntStop,
cvPeerCommonCfgDnisMappingName,
cvPeerCommonCfgSourceCarrierId,
cvPeerCommonCfgTargetCarrierId,
cvPeerCommonCfgSourceTrunkGrpLabel,
cvPeerCommonCfgTargetTrunkGrpLabel,
cvGeneralDSCPPolicyNotificationEnable,
cvGeneralMediaPolicyNotificationEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing the general
Voice Gateway Call Dial Control configuration
capability."
::= { cvdcMIBGroups 30 }
cvdcNotificationGroupRev3 NOTIFICATION-GROUP
NOTIFICATIONS {
cvdcPoorQoVNotificationRev1,
cvdcActiveDS0sHighNotification,
cvdcActiveDS0sLowNotification,
cvdcFallbackNotification
}
STATUS deprecated
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB.
This group cvdcNotificationGroupRev3 is deprecated and replaced
by cvdcNotificationGroupRev4.
cvdcNotificationGroupRev3 group is superseded by cvdcNotificationGroupRev4."
::= { cvdcMIBGroups 31 }
cvdcVoIPCfgAmrNbGroup OBJECT-GROUP
OBJECTS {
cvVoIPPeerCfgOctetAligned,
cvVoIPPeerCfgBitRates,
cvVoIPPeerCfgCRC
}
STATUS current
DESCRIPTION
"A collection of objects providing the VoIP Dial Control
configuration capability for GSM AMR-NB codec."
::= { cvdcMIBGroups 32 }
cvVoIPCallAmrNbGroup OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveOctetAligned,
cvVoIPCallActiveBitRates,
cvVoIPCallActiveModeChgPeriod,
cvVoIPCallActiveModeChgNeighbor,
cvVoIPCallActiveMaxPtime,
cvVoIPCallActiveCRC,
cvVoIPCallActiveRobustSorting,
cvVoIPCallActiveEncap,
cvVoIPCallActiveInterleaving,
cvVoIPCallActivePtime,
cvVoIPCallActiveChannels,
cvVoIPCallHistoryOctetAligned,
cvVoIPCallHistoryBitRates,
cvVoIPCallHistoryModeChgPeriod,
cvVoIPCallHistoryModeChgNeighbor,
cvVoIPCallHistoryMaxPtime,
cvVoIPCallHistoryCRC,
cvVoIPCallHistoryRobustSorting,
cvVoIPCallHistoryEncap,
cvVoIPCallHistoryInterleaving,
cvVoIPCallHistoryPtime,
cvVoIPCallHistoryChannels
}
STATUS current
DESCRIPTION
"A collection of objects providing GSM AMR-NB
codec related information."
::= { cvdcMIBGroups 33 }
cvdcVoIPCfgIlbcGroup OBJECT-GROUP
OBJECTS { cvVoIPPeerCfgCoderMode }
STATUS current
DESCRIPTION
"A collection of objects providing the VoIP Dial Control
configuration capability for iLBC codec."
::= { cvdcMIBGroups 34 }
cvVoIPCallIlbcGroup OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveCoderMode,
cvVoIPCallHistoryCoderMode
}
STATUS current
DESCRIPTION
"A collection of objects providing iLBC
codec related information."
::= { cvdcMIBGroups 35 }
cvCallGroupSup1 OBJECT-GROUP
OBJECTS {
cvCallActiveCallId,
cvCallHistoryCallId
}
STATUS current
DESCRIPTION
"This group supplements cvCallGroup to provide
the call identifier for the telephony leg of
the gateway call."
::= { cvdcMIBGroups 36 }
cvVoIPCallGroupSup1 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveCallId,
cvVoIPCallHistoryCallId,
cvVoIPCallActiveCallReferenceId,
cvVoIPCallHistoryCallReferenceId
}
STATUS deprecated
DESCRIPTION
"This group supplements cvVoIPCallGroup to
provide the call identifier for the VoIP
leg of the gateway call.
The group cvVoIPCallGroupSup1 is deprecated and replaced by
cvVoIPCallGroupSup2."
::= { cvdcMIBGroups 37 }
cvCallVolumeGroup OBJECT-GROUP
OBJECTS {
cvCallVolConnActiveConnection,
cvCallVolConnTotalActiveConnections,
cvCallVolConnMaxCallConnectionLicenese,
cvCallVolPeerIncomingCalls,
cvCallVolPeerOutgoingCalls,
cvCallVolMediaIncomingCalls,
cvCallVolMediaOutgoingCalls
}
STATUS current
DESCRIPTION
"This group provides the information about the call-volume
in the voice gateway."
::= { cvdcMIBGroups 38 }
cvCallRateMonitorGroup OBJECT-GROUP
OBJECTS {
cvCallRateMonitorEnable,
cvCallRateMonitorTime,
cvCallRate,
cvCallRateHiWaterMark
}
STATUS current
DESCRIPTION
"This group represents the objects used to
monitor the call-rate."
::= { cvdcMIBGroups 39 }
cvdcVoIPCfgISACGroup OBJECT-GROUP
OBJECTS {
cvVoIPPeerCfgCodingMode,
cvVoIPPeerCfgBitRate,
cvVoIPPeerCfgFrameSize
}
STATUS current
DESCRIPTION
"A collection of objects providing iSAC codec related
information."
::= { cvdcMIBGroups 40 }
cvdcNotificationGroupRev4 NOTIFICATION-GROUP
NOTIFICATIONS {
cvdcPoorQoVNotificationRev1,
cvdcActiveDS0sHighNotification,
cvdcActiveDS0sLowNotification,
cvdcFallbackNotification,
cvdcPolicyViolationNotification
}
STATUS current
DESCRIPTION
"The notifications for the CISCO-VOICE-DIAL-CONTROL-MIB."
::= { cvdcMIBGroups 41 }
cvVoIPCallGroupSup2 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveReversedDirectionPeerAddress,
ccVoIPCallActivePolicyName,
cvVoIPCallActiveCallId,
cvVoIPCallActiveCallReferenceId,
cvVoIPCallHistoryCallId,
cvVoIPCallHistoryCallReferenceId
}
STATUS deprecated
DESCRIPTION
"This group supplements cvVoIPCallGroup to provide the call
identifier and policy for the VoIP leg of the gateway call.
cvVoIPCallGroupSup2 group is superseded by cvVoIPCallGroupSup3."
::= { cvdcMIBGroups 42 }
cvVoIPCallGroupSup3 OBJECT-GROUP
OBJECTS {
cvVoIPCallActiveReversedDirectionPeerAddress,
ccVoIPCallActivePolicyName,
cvVoIPCallActiveCallId,
cvVoIPCallActiveCallReferenceId,
cvVoIPCallActiveSessionId,
cvVoIPCallHistoryCallId,
cvVoIPCallHistoryCallReferenceId,
cvVoIPCallHistorySessionId
}
STATUS current
DESCRIPTION
"This group supplements cvVoIPCallGroup to identify the VoIP leg
of the gateway call."
::= { cvdcMIBGroups 43 }
cvdcCallVolumeStatsHistory OBJECT-GROUP
OBJECTS {
cvCallRateStatsMaxVal,
cvCallRateStatsAvgVal,
cvCallLegRateStatsMaxVal,
cvCallLegRateStatsAvgVal,
cvActiveCallStatsMaxVal,
cvActiveCallStatsAvgVal,
cvCallDurationStatsMaxVal,
cvCallDurationStatsAvgVal,
cvSipMsgRateStatsMaxVal,
cvSipMsgRateStatsAvgVal,
cvCallRateWMValue,
cvCallRateWMts,
cvActiveCallWMValue,
cvActiveCallWMts,
cvSipMsgRateWMValue,
cvSipMsgRateWMts,
cvCallDurationStatsThreshold,
cvCallVolumeWMTableSize,
cvCallLegRateWMValue,
cvCallLegRateWMts
}
STATUS current
DESCRIPTION
"This group provides the information about the Call Volume Stats
History information in the voice gateway."
::= { cvdcMIBGroups 44 }
END
Reference in New Issue Copy Permalink