david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-WAN-CELL-EXT-MIB

1368 lines
46 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-WAN-CELL-EXT-MIB.MY: Cisco Cellular 4G/LTE WAN MIB file
-- January 2014. Shankar Garikapati
--
-- Copyright (c) 2014 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-WAN-CELL-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
Unsigned32,
Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
entPhysicalIndex,
entPhysicalName
FROM ENTITY-MIB
ifIndex
FROM IF-MIB
RowStatus,
StorageType,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
C3gServiceCapability
FROM CISCO-WAN-3G-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoWanCellExtMIB MODULE-IDENTITY
LAST-UPDATED "201403050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-3g@cisco.com
cs-4g@cisco.com"
DESCRIPTION
"This MIB module is an extension of
CISCO-WAN-3G-MIB.my, and it provides
network management support for Cisco cellular
WAN 4G/LTE products.
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
AMBR - Aggregate Maximum Bit Rate
APN - Access Point Name
ARP - Allocation and Retention Priority
CQI - Channel Quality Indicator
eNodeB - Evolved Node B
EPS - Evolved Packet System
E-UTRAN - Evolved Universal Terrestrial Radio Access
GBR - Guaranteed Bit Rate
LTE - Long Term Evolution
MBR - Maximum Bit Rate
PCRF - Policy and Charging Rules Function
PDN - Packet Data Network
QCI - QoS Class Identifier
QOS - Quality of Service
RF - Radio Frequency
RSRP - Reference Signal Receive Power
RSRQ - Reference Signal Receive Quality
SINR - Signal-to-Interference plus Noise Ratio
SNR - Signal-to-Noise Ratio
UE - User Equipment"
REVISION "201403050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 817 }
ciscoWanCellExtMIBNotifs OBJECT IDENTIFIER
::= { ciscoWanCellExtMIB 0 }
ciscoWanCellExtMIBObjects OBJECT IDENTIFIER
::= { ciscoWanCellExtMIB 1 }
ciscoWanCellExtMIBConform OBJECT IDENTIFIER
::= { ciscoWanCellExtMIB 2 }
ciscoWanCellExtLte OBJECT IDENTIFIER
::= { ciscoWanCellExtMIBObjects 1 }
cwceLteRadio OBJECT IDENTIFIER
::= { ciscoWanCellExtLte 1 }
cwceLteProfile OBJECT IDENTIFIER
::= { ciscoWanCellExtLte 2 }
CiscoWanCellExtProtocolType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Generic PDN type."
SYNTAX INTEGER {
unknown(1),
ipv4(2),
ppp(3),
ipv6(4),
ipv4V6(5)
}
CiscoWanCellExtRsrp ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Reference signal received power (RSRP) is
defined as the linear average over the power
contributions and measured in dBm. The reporting
range of RSRP is defined per LTE standard
with 1 dBm resolution."
SYNTAX Integer32
CiscoWanCellExtRsrq ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-1"
STATUS current
DESCRIPTION
"Reference Signal Received Quality (RSRQ) is
defined as the ratio NxRSRP over (E-UTRAN carrier RSSI)
and measured in dB. The reporting range of
RSRQ is defined per LTE standard with 0.5 dB
resolution."
SYNTAX Integer32
CiscoWanCellExtCqiIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Channel Quality indicator reported to eNodeB
which directly translates to Modulation Coding
Scheme selected."
SYNTAX Unsigned32
CiscoWanCellExtSNR ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-1"
STATUS current
DESCRIPTION
"Signal-to-Noise power Ratio (SNR)
is defined as the ratio of signal
power to the noise power, measured
in dB. It determines the downlink
throughput for the UE."
SYNTAX Integer32
CiscoWanCellExtSINR ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-1"
STATUS current
DESCRIPTION
"Signal to Interference plus Noise Ratio is
the power at the receiver due to the required
signal, divided by the power due to noise and
interference measured in dB. It is used as a
measure of signal quality."
SYNTAX Integer32
cwceLteRadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwceLteRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entPhysicalTable entries which
are capable of providing operational Cellular 4G/LTE
Radio signal parameters and administrative notification
information."
::= { cwceLteRadio 1 }
cwceLteRadioEntry OBJECT-TYPE
SYNTAX CwceLteRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains management information of Cellular
4G/LTE Radio signal parameters and notification
information.
An entry of this table is created if an entity capable
of providing operational Cellular 4G/LTE Radio signal
parameters and administrative notification information
is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed."
INDEX { entPhysicalIndex }
::= { cwceLteRadioTable 1 }
CwceLteRadioEntry ::= SEQUENCE {
cwceLteCurrRsrp CiscoWanCellExtRsrp,
cwceLteCurrRsrq CiscoWanCellExtRsrq,
cwceLteCurrSnr CiscoWanCellExtSNR,
cwceLteCurrSinr CiscoWanCellExtSINR,
cwceLteCurrCqiIndex CiscoWanCellExtCqiIndex,
cwceLteCurrOperatingBand Unsigned32,
cwceLteNotifRsrp CiscoWanCellExtRsrp,
cwceLteNotifRsrq CiscoWanCellExtRsrq,
cwceLteRsrpOnsetNotifThreshold CiscoWanCellExtRsrp,
cwceLteRsrpAbateNotifThreshold CiscoWanCellExtRsrp,
cwceLteRsrqOnsetNotifThreshold CiscoWanCellExtRsrq,
cwceLteRsrqAbateNotifThreshold CiscoWanCellExtRsrq,
cwceLteRsrpOnsetNotifFlag C3gServiceCapability,
cwceLteRsrpAbateNotifFlag C3gServiceCapability,
cwceLteRsrqOnsetNotifFlag C3gServiceCapability,
cwceLteRsrqAbateNotifFlag C3gServiceCapability
}
cwceLteCurrRsrp OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrp
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the LTE RSRP value reported by
the modem."
::= { cwceLteRadioEntry 1 }
cwceLteCurrRsrq OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrq
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the LTE RSRQ value reported by
the modem."
::= { cwceLteRadioEntry 2 }
cwceLteCurrSnr OBJECT-TYPE
SYNTAX CiscoWanCellExtSNR
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the LTE SNR value reported by
the modem."
::= { cwceLteRadioEntry 3 }
cwceLteCurrSinr OBJECT-TYPE
SYNTAX CiscoWanCellExtSINR
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the LTE SINR value measured in
decibels (dB) reported by the modem."
::= { cwceLteRadioEntry 4 }
cwceLteCurrCqiIndex OBJECT-TYPE
SYNTAX CiscoWanCellExtCqiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates he LTE CQI Index reported by
the modem."
::= { cwceLteRadioEntry 5 }
cwceLteCurrOperatingBand OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the E-UTRAN Operating Band reported
by the modem."
::= { cwceLteRadioEntry 6 }
cwceLteNotifRsrp OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the LTE RSRP value reported by
the modem which triggered the most recent
cwceLteRsrpOnsetNotif or cwceLteRsrpAbateNotif
notification."
::= { cwceLteRadioEntry 7 }
cwceLteNotifRsrq OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrq
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the LTE RSRP value reported by
the modem which triggered the most recent
cwceLteRsrqOnsetNotif or cwceLteRsrqAbateNotif
notification."
::= { cwceLteRadioEntry 8 }
cwceLteRsrpOnsetNotifThreshold OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrp
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the RSRP onset threshold
value. If the value of cwceLteCurrRsrp goes
below the threshold and the service bit in
cwceLteRsrpOnsetNotifFlag is set, the
cwceLteRsrqOnsetNotif notification for that
service will be sent. The absolute value of
cwceLteRsrpAbateNotifThreshold should be less
than or equal to the absolute value of
cwceLteRsrpOnsetNotifThreshold
(|cwceLteRsrpAbateNotifThreshold| <=
|cwceLteRsrpOnsetNotifThreshold|)."
::= { cwceLteRadioEntry 9 }
cwceLteRsrpAbateNotifThreshold OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrp
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the RSRP abate
threshold value. If the value of
cwceLteCurrRsrp goes above the threshold
and the service bit in cwceLteRsrpOnsetNotifFlag
is set, the cwceLteRsrpAbateNotif notification
for that service will be sent. The absolute
value of cwceLteRsrpAbateNotifThreshold should
be less than or equal to the absolute value of
cwceLteRsrpOnsetNotifThreshold
(|cwceLteRsrpAbateNotifThreshold| <=
|cwceLteRsrpOnsetNotifThreshold|)."
::= { cwceLteRadioEntry 10 }
cwceLteRsrqOnsetNotifThreshold OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrq
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the RSRQ onset threshold
value. If the value of cwceLteCurrRsrq goes below
the threshold and the service bit in
cwceLteRsrqOnsetNotifFlag is set, the
cwceLteRsrqOnsetNotif notification for that
service will be sent. The absolute value of
cwceLteRsrqAbateNotifThreshold should be
less than or equal to the absolute value of
cwceLteRsrqOnsetNotifThreshold
(|cwceLteRsrqAbateNotifThreshold| <=
|cwceLteRsrqOnsetNotifThreshold|)."
::= { cwceLteRadioEntry 11 }
cwceLteRsrqAbateNotifThreshold OBJECT-TYPE
SYNTAX CiscoWanCellExtRsrq
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the RSRQ abate
threshold value. If the value of
cwceLteCurrRsrq goes above the threshold
and the service bit in
cwceLteRsrqOnsetNotifFlag is set, the
cwceLteRsrqAbateNotif notification for that
service will be sent. The absolute value of
cwceLteRsrqAbateNotifThreshold should be
less than or equal to the absolute value of
cwceLteRsrqOnsetNotifThreshold
(|cwceLteRsrqAbateNotifThreshold| <=
|cwceLteRsrqOnsetNotifThreshold|)."
::= { cwceLteRadioEntry 12 }
cwceLteRsrpOnsetNotifFlag OBJECT-TYPE
SYNTAX C3gServiceCapability
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the flag bitmap to control
the generation of notification cwceLteRsrpOnsetNotif.
Each bit represents a service as defined in
C3gServiceCapability, set the bit value to 1
to enable (and 0 to disable) the generation of
notification cwceLteRsrpOnsetNotif for that service.
The default value of this object is all bits are 0.
Notifications are not generated in technology modes
where RSRP is not relevant."
::= { cwceLteRadioEntry 13 }
cwceLteRsrpAbateNotifFlag OBJECT-TYPE
SYNTAX C3gServiceCapability
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the flag bitmap to control the generation
of notification cwceLteRsrpAbateNotif. Each bit
represents a service as defined in C3gServiceCapability,
set the bit value to 1 to enable (and 0 to disable) the
generation of notification cwceLteRsrpAbateNotif
for that service. The default value of this object is
all bits are 0. Notifications are not generated in
technology modes where RSRP is not relevant."
::= { cwceLteRadioEntry 14 }
cwceLteRsrqOnsetNotifFlag OBJECT-TYPE
SYNTAX C3gServiceCapability
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the flag bitmap to control the generation
of notification cwceLteRsrqOnsetNotif. Each bit
represents a service as defined in C3gServiceCapability,
set the bit value to 1 to enable (and 0 to disable) the
generation of notification cwceLteRsrqOnsetNotif
for that service. The default value of this object is
all bits are 0. Notifications are not generated in
technology modes where RSRQ is not relevant."
::= { cwceLteRadioEntry 15 }
cwceLteRsrqAbateNotifFlag OBJECT-TYPE
SYNTAX C3gServiceCapability
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the flag bitmap to control the generation
of notification cwceLteRsrqAbateNotif. Each bit
represents a service as defined in C3gServiceCapability,
set the bit value to 1 to enable (and 0 to disable) the
generation of notification cwceLteRsrqAbateNotif
for that service. The default value of this object is
all bits are 0. Notifications are not generated in
technology modes where RSRQ is not relevant."
::= { cwceLteRadioEntry 16 }
cwceLteRadioHistory OBJECT IDENTIFIER
::= { cwceLteRadio 2 }
cwceLteRadioHistoryRsrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwceLteRadioHistoryRsrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Cellular 4G/LTE RSRP history.
The history of RSRP are carried in an octet of string.
Each octet in the octet string has a value from 40 to
140 and the 150 value is reserved to indicate an
uninitialized (Invalid) value. The format of
the octet string with n octets is as following:
[ octet 0 is latest,
octet 1 is latest-1,
.
.
octet n-2 is oldest-1,
octet n-1 is oldest ]
To convert the provided value into dBm the following formula
should be used:
dBm = (-1)*value"
::= { cwceLteRadioHistory 1 }
cwceLteRadioHistoryRsrpEntry OBJECT-TYPE
SYNTAX CwceLteRadioHistoryRsrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains management information of Cellular
4G/LTE RSRP Radio history parameters.
An entry of this table is created if an entity capable
of providing operational Cellular 4G/LTE RSRP Radio
history is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed."
INDEX { entPhysicalIndex }
::= { cwceLteRadioHistoryRsrpTable 1 }
CwceLteRadioHistoryRsrpEntry ::= SEQUENCE {
cwceLteRadioHistoryRsrpPerSecond OCTET STRING,
cwceLteRadioHistoryRsrpPerMinute OCTET STRING,
cwceLteRadioHistoryRsrpPerHour OCTET STRING
}
cwceLteRadioHistoryRsrpPerSecond OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (60))
UNITS "-dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates per-second RSRP history.
It contains a per-second history of RSRP values
for the last 60 seconds."
::= { cwceLteRadioHistoryRsrpEntry 1 }
cwceLteRadioHistoryRsrpPerMinute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (60))
UNITS "-dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates per-minute weakest RSRP value history.
It contains a per-minute history of weakest RSRP values for
the last 60 minutes. The octet in the string is the weakest
RSRP value measured in a minute interval."
::= { cwceLteRadioHistoryRsrpEntry 2 }
cwceLteRadioHistoryRsrpPerHour OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (72))
UNITS "-dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates per-hour weakest RSRP value history.
It contains a per-hour history of weakest RSRP values for
the last 72 hours. The octet in the string is the weakest
RSRP value measured in an hour interval."
::= { cwceLteRadioHistoryRsrpEntry 3 }
cwceLteRadioHistoryRsrqTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwceLteRadioHistoryRsrqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Cellular 4G/LTE RSRQ history.
The history of RSRQ are carried in an octet of string.
Each octet in the octet string has a value from 3 to 20
and the 25 value is reserved to indicate an uninitialized
(Invalid) value. The format of the octet string with n
octets is as following:
[ octet 0 is latest,
octet 1 is latest-1,
.
.
octet n-2 is oldest-1,
octet n-1 is oldest ]
To convert the provided value into dB the following formula
should be used:
dB = (-1)*value"
::= { cwceLteRadioHistory 2 }
cwceLteRadioHistoryRsrqEntry OBJECT-TYPE
SYNTAX CwceLteRadioHistoryRsrqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains management information of Cellular
4G/LTE RSRQ Radio history parameters.
An entry of this table is created if an entity capable
of providing operational Cellular 4G/LTE RSRQ Radio
history is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed."
INDEX { entPhysicalIndex }
::= { cwceLteRadioHistoryRsrqTable 1 }
CwceLteRadioHistoryRsrqEntry ::= SEQUENCE {
cwceLteRadioHistoryRsrqPerSecond OCTET STRING,
cwceLteRadioHistoryRsrqPerMinute OCTET STRING,
cwceLteRadioHistoryRsrqPerHour OCTET STRING
}
cwceLteRadioHistoryRsrqPerSecond OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (60))
UNITS "-dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates per-second RSRQ history.
It contains a per-second history of RSRQ values for
the last 60 seconds."
::= { cwceLteRadioHistoryRsrqEntry 1 }
cwceLteRadioHistoryRsrqPerMinute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (60))
UNITS "-dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates per-minute weakest RSRQ value history.
It contains a per-minute history of weakest RSRQ values
for the last 60 minutes. The octet in the string is the
weakest RSRQ value measured in a minute interval."
::= { cwceLteRadioHistoryRsrqEntry 2 }
cwceLteRadioHistoryRsrqPerHour OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (72))
UNITS "-dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates per-hour weakest RSRQ value history.
It contains a per-hour history of weakest RSRQ values
for the last 72 hours. The octet in the string is
the weakest RSRQ value measured in an hour interval."
::= { cwceLteRadioHistoryRsrqEntry 3 }
cwceLteIpv4AddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the type of Internet address for
IPv4 addresses used by profiles and PDNs.
The valid value for this object is ipv4(1)."
::= { cwceLteProfile 1 }
cwceLteIpv6AddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the type of Internet address for
IPv6 addresses used by profiles and PDNs.
The valid value for this object is ipv6(2)."
::= { cwceLteProfile 2 }
cwceLteProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwceLteProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Cellular LTE PDN profiles.
Cellular device contains multiple profile entries which can
be used to establish cellular data connections (PDN contexts).
Users can choose any of available PDN profiles to establish
data connections. Data connections are described in
cwcePacketLteSessionTable.
This table is valid only in 4G/LTE Technology mode."
::= { cwceLteProfile 3 }
cwceLteProfileEntry OBJECT-TYPE
SYNTAX CwceLteProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains management information of Cellular
4G/LTE profile parameters.
Entries in this table can be created or deleted using
cwceLteProfileRowStatus object.
An entry of this table is deleted by the agent if the
corresponding entry in entPhysicalTable is removed."
INDEX {
entPhysicalIndex,
cwceLteProfileIndex
}
::= { cwceLteProfileTable 1 }
CwceLteProfileEntry ::= SEQUENCE {
cwceLteProfileIndex Unsigned32,
cwceLteProfileType CiscoWanCellExtProtocolType,
cwceLteProfileIPv4Addr InetAddress,
cwceLteProfileIPv6Addr InetAddress,
cwceLteProfileApn SnmpAdminString,
cwceLteProfileApnAmbr Unsigned32,
cwceLteProfileStorage StorageType,
cwceLteProfileRowStatus RowStatus
}
cwceLteProfileIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies profile index, combined with
entPhysicalIndex to access profile table."
::= { cwceLteProfileEntry 1 }
cwceLteProfileType OBJECT-TYPE
SYNTAX CiscoWanCellExtProtocolType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the configured EPS Bearer type."
::= { cwceLteProfileEntry 2 }
cwceLteProfileIPv4Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the configured EPS Bearer IPv4 address.
The type of this address is determined by the value of the
cwceLteIpv4AddrType object.
This object is valid only if the corresponding instance value
of cwceLteProfileType is either 'ipv4' or 'ipv4V6'."
::= { cwceLteProfileEntry 3 }
cwceLteProfileIPv6Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the configured EPS Bearer IPv6 address.
The type of this address is determined by the value of the
cwceLteIpv6AddrType object.
This object is valid only if the corresponding instance value
of cwceLteProfileType is either 'ipv6' or 'ipv4V6'."
::= { cwceLteProfileEntry 4 }
cwceLteProfileApn OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies configured profile of Access Point
Name (APN). The value of this object should be provided
by the APN service provider."
::= { cwceLteProfileEntry 5 }
cwceLteProfileApnAmbr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the profile APN-AMBR.
APN-AMBR is aggregate bit rate across all Non-GBR bearers
and across all PDN connections of the same APN. The value
APN-AMBR is a parameter which is defined as part of a user's
subscription, but may be overridden by the PCRF."
::= { cwceLteProfileEntry 6 }
cwceLteProfileStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type for this
conceptual row."
::= { cwceLteProfileEntry 7 }
cwceLteProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the status of the conceptual row.
It's used to manage creation, modification and deletion
of rows in this table.
When a row is active, user cannot modify the value of the
objects in that row. All objects in this row need to have
valid value before the row can be active."
::= { cwceLteProfileEntry 8 }
cwceLtePdnTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwceLtePdnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Cellular 4G/LTE Packet Data Network(PDN)
information of all the PDN capable interfaces in the system."
::= { cwceLteProfile 4 }
cwceLtePdnEntry OBJECT-TYPE
SYNTAX CwceLtePdnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains management information of Cellular
4G/LTE PDN parameters.
An entry of this table is created if an interface capable
of providing operational Cellular 4G/LTE PDN parameters
is detected by the agent.
An entry of this table is deleted by the agent if the
corresponding entry in ifTable is removed."
INDEX { ifIndex }
::= { cwceLtePdnTable 1 }
CwceLtePdnEntry ::= SEQUENCE {
cwceLtePdnProfileUsed Unsigned32,
cwceLtePdnConnStatus INTEGER,
cwceLtePdnType CiscoWanCellExtProtocolType,
cwceLtePdnIpv4Addr InetAddress,
cwceLtePdnIpv6Addr InetAddress,
cwceLtePdnPriDnsIpv4Addr InetAddress,
cwceLtePdnSecDnsIpv4Addr InetAddress,
cwceLtePdnPriDnsIpv6Addr InetAddress,
cwceLtePdnSecDnsIpv6Addr InetAddress
}
cwceLtePdnProfileUsed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the cwceLteProfileIndex of
the profile used by current EPS bearer to
establish data connection."
::= { cwceLtePdnEntry 2 }
cwceLtePdnConnStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
active(2),
inactive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates PDN session status
of the profile. This is active when the call is
established and PDN context has become active."
DEFVAL { inactive }
::= { cwceLtePdnEntry 3 }
cwceLtePdnType OBJECT-TYPE
SYNTAX CiscoWanCellExtProtocolType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates current session PDN type."
::= { cwceLtePdnEntry 4 }
cwceLtePdnIpv4Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates current session
EPS Bearer IPv4 address.
The type of this address is determined by
the value of the cwceLteIpv4AddrType object."
::= { cwceLtePdnEntry 5 }
cwceLtePdnIpv6Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates current session
EPS Bearer IPv6 address.
The type of this address is determined by
the value of the cwceLteIpv6AddrType object."
::= { cwceLtePdnEntry 6 }
cwceLtePdnPriDnsIpv4Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates current session
EPS Bearer Primary DNS IPv4 address.
The type of this address is determined by
the value of the cwceLteIpv4AddrType object."
::= { cwceLtePdnEntry 7 }
cwceLtePdnSecDnsIpv4Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates current session
EPS Bearer Secondary DNS IPv4 address.
The type of this address is determined by
the value of the cwceLteIpv4AddrType object."
::= { cwceLtePdnEntry 8 }
cwceLtePdnPriDnsIpv6Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates current session
EPS Bearer Primary DNS IPv6 address.
The type of this address is determined by
the value of the cwceLteIpv6AddrType object."
::= { cwceLtePdnEntry 9 }
cwceLtePdnSecDnsIpv6Addr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates current session
EPS Bearer Secondary DNS IPv6 address.
The type of this address is determined by
the value of the cwceLteIpv6AddrType object."
::= { cwceLtePdnEntry 10 }
cwceLteEpsBearerQosTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwceLteEpsBearerQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains 4G/LTE QoS parameters
requested by modem to the cellular network
via PDN Context Activation Request message."
::= { cwceLteProfile 5 }
cwceLteEpsBearerQosEntry OBJECT-TYPE
SYNTAX CwceLteEpsBearerQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains management information of Cellular
4G/LTE QoS parameters.
An entry of this table is created if an interface
capable of providing operational Cellular 4G/LTE
QoS parameters is detected by the agent.
An entry of this table is deleted by the agent
if the corresponding entry in ifTable is removed."
INDEX {
ifIndex,
cwceLteEpsBearerId
}
::= { cwceLteEpsBearerQosTable 1 }
CwceLteEpsBearerQosEntry ::= SEQUENCE {
cwceLteEpsBearerId Unsigned32,
cwceLteEpsBearerType INTEGER,
cwceLteEpsQCI Unsigned32,
cwceLteEpsArp Unsigned32,
cwceLteEpsBearerResType INTEGER,
cwceLteEpsGbr Unsigned32,
cwceLteEpsMbr Unsigned32,
cwceLteEpsAmbr Unsigned32,
cwceLteEpsTotalBytesTx Counter64,
cwceLteEpsTotalBytesRx Counter64,
cwceLteEpsPacketsTx Counter64,
cwceLteEpsPacketsRx Counter64
}
cwceLteEpsBearerId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the EPS Bearer Identity which is
allocated by the Mobility Management Entity (MME)."
::= { cwceLteEpsBearerQosEntry 1 }
cwceLteEpsBearerType OBJECT-TYPE
SYNTAX INTEGER {
gbr(1),
nonGbr(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of bearers.
gbr - Guaranteed Bit Rate(GBR).
GBR bearer has a minimum amount of bandwidth that
is reserved by the network, and these resources are
always consumed in a radio base station regardless
of whether it is used or not.
nonGbr - non-Guaranteed Bit Rate(Non-GBR).
Non-GBR bearers are for best-effort services and do
not consume any network
resources.
unknown - the type of bearers is unknown."
::= { cwceLteEpsBearerQosEntry 2 }
cwceLteEpsQCI OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the QoS Class Identifier(QCI).
The QCI along with the ARP characterizes the QoS of
the bearer."
::= { cwceLteEpsBearerQosEntry 3 }
cwceLteEpsArp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Allocation and Retention
Priority(ARP).
ARP is a QoS parameter designed to facilitate decisions
as to whether a bearer establishment/modification request
can be accepted."
::= { cwceLteEpsBearerQosEntry 4 }
cwceLteEpsBearerResType OBJECT-TYPE
SYNTAX INTEGER {
defaultBearer(1),
dedicatedBearer(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Bearer resource type."
::= { cwceLteEpsBearerQosEntry 5 }
cwceLteEpsGbr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Guaranteed Bit Rate(GBR) which
determines the resource reservation to guarantee a
given data rate."
::= { cwceLteEpsBearerQosEntry 6 }
cwceLteEpsMbr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Maximum Bit Rate(MBR) which is
used for policing the user traffic."
::= { cwceLteEpsBearerQosEntry 7 }
cwceLteEpsAmbr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Aggregated Maximum Bit Rate.
This object is valid only if the value of the corresponding
cwceLteEpsBearerResType is 'defaultBearer'."
::= { cwceLteEpsBearerQosEntry 8 }
cwceLteEpsTotalBytesTx OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total data bytes transmitted
by this bearer."
::= { cwceLteEpsBearerQosEntry 9 }
cwceLteEpsTotalBytesRx OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total data bytes received
by this bearer."
::= { cwceLteEpsBearerQosEntry 10 }
cwceLteEpsPacketsTx OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of packets transmitted
by this bearer."
::= { cwceLteEpsBearerQosEntry 11 }
cwceLteEpsPacketsRx OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of packets received
by this bearer."
::= { cwceLteEpsBearerQosEntry 12 }
cwceLteRsrqOnsetNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
cwceLteRsrqOnsetNotifFlag,
cwceLteNotifRsrq,
cwceLteRsrqOnsetNotifThreshold
}
STATUS current
DESCRIPTION
"If RSRQ goes below cwceLteRsrqOnsetNotifThreshold
and the service bit in cwceLteRsrqOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrqOnsetNotifFlag will indicate which service
generates this notification and the associated RSRQ
will be reported in cwceLteNotifRsrq. Please note
that cwceLteNotifRsrq is used to indicate the
RSRQ value that triggers the notification, user
should go to the corresponding radio table to
get the current RSRQ value."
::= { ciscoWanCellExtMIBNotifs 1 }
cwceLteRsrqAbateNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
cwceLteRsrqAbateNotifFlag,
cwceLteNotifRsrq,
cwceLteRsrqAbateNotifThreshold
}
STATUS current
DESCRIPTION
"If RSRQ goes above cwceLteRsrqAbateNotifThreshold
and the service bit in cwceLteRsrqOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrqAbateNotifFlag will indicate which service
generates this notification and the associated RSRQ
will be reported in cwceLteNotifRsrq. Please
note that cwceLteNotifRsrq is used to indicate
the RSRQ value that triggers the notification,
user should go to the corresponding radio table to
get the current RSRQ value."
::= { ciscoWanCellExtMIBNotifs 2 }
cwceLteRsrpOnsetNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
cwceLteRsrpOnsetNotifFlag,
cwceLteNotifRsrp,
cwceLteRsrpOnsetNotifThreshold
}
STATUS current
DESCRIPTION
"If RSRP goes below cwceLteRsrpOnsetNotifThreshold
and the service bit in cwceLteRsrpOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrpOnsetNotifFlag will indicate which service
generates this notification and the associated RSRP
will be reported in cwceLteNotifRsrp. Please
note that cwceLteNotifRsrp is used to indicate
the RSRP value that triggers the notification,
user should go to the
corresponding radio table to get the current RSRP
value."
::= { ciscoWanCellExtMIBNotifs 3 }
cwceLteRsrpAbateNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalName,
cwceLteRsrpAbateNotifFlag,
cwceLteNotifRsrp,
cwceLteRsrpAbateNotifThreshold
}
STATUS current
DESCRIPTION
"If RSRP goes above cwceLteRsrqAbateNotifThreshold
and the service bit in cwceLteRsrpOnsetNotifFlag
is set, this notification will be generated. Object
cwceLteRsrpAbateNotifFlag will indicate which service
generates this notification and the associated RSRP
will be reported in cwceLteNotifRsrp. Please
note that cwceLteNotifRsrp is used to indicate
the RSRP value that triggers the notification,
user should go to the corresponding radio table to
get the current RSRP value."
::= { ciscoWanCellExtMIBNotifs 4 }
-- Conformance
ciscoWanCellExtMIBCompliances OBJECT IDENTIFIER
::= { ciscoWanCellExtMIBConform 1 }
ciscoWanCellExtMIBGroups OBJECT IDENTIFIER
::= { ciscoWanCellExtMIBConform 2 }
ciscoWanCellExtMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the
CISCO-WAN-CELL-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoWanCellExtMIBNotificationGroup,
ciscoWanCellExtMIBLteObjectGroup
}
OBJECT cwceLteRsrpOnsetNotifThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteRsrpAbateNotifThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteRsrqOnsetNotifThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteRsrqAbateNotifThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteRsrpOnsetNotifFlag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteRsrpAbateNotifFlag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteRsrqOnsetNotifFlag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteRsrqAbateNotifFlag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cwceLteProfileType
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required."
OBJECT cwceLteProfileIPv4Addr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required."
OBJECT cwceLteProfileIPv6Addr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required."
OBJECT cwceLteProfileApn
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required."
OBJECT cwceLteProfileApnAmbr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required."
OBJECT cwceLteProfileStorage
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required."
OBJECT cwceLteProfileRowStatus
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required."
::= { ciscoWanCellExtMIBCompliances 1 }
ciscoWanCellExtMIBLteObjectGroup OBJECT-GROUP
OBJECTS {
cwceLteCurrRsrp,
cwceLteCurrRsrq,
cwceLteCurrSnr,
cwceLteCurrSinr,
cwceLteCurrCqiIndex,
cwceLteNotifRsrp,
cwceLteNotifRsrq,
cwceLteRsrpOnsetNotifThreshold,
cwceLteRsrpAbateNotifThreshold,
cwceLteRsrqOnsetNotifThreshold,
cwceLteRsrqAbateNotifThreshold,
cwceLteRsrpOnsetNotifFlag,
cwceLteRsrpAbateNotifFlag,
cwceLteRsrqOnsetNotifFlag,
cwceLteRsrqAbateNotifFlag,
cwceLteCurrOperatingBand,
cwceLteRadioHistoryRsrpPerSecond,
cwceLteRadioHistoryRsrpPerMinute,
cwceLteRadioHistoryRsrpPerHour,
cwceLteRadioHistoryRsrqPerSecond,
cwceLteRadioHistoryRsrqPerMinute,
cwceLteRadioHistoryRsrqPerHour,
cwceLteIpv4AddrType,
cwceLteIpv6AddrType,
cwceLteProfileType,
cwceLteProfileIPv4Addr,
cwceLteProfileIPv6Addr,
cwceLteProfileApn,
cwceLteProfileApnAmbr,
cwceLteProfileStorage,
cwceLteProfileRowStatus,
cwceLtePdnProfileUsed,
cwceLtePdnConnStatus,
cwceLtePdnType,
cwceLtePdnIpv4Addr,
cwceLtePdnIpv6Addr,
cwceLtePdnPriDnsIpv4Addr,
cwceLtePdnSecDnsIpv4Addr,
cwceLtePdnPriDnsIpv6Addr,
cwceLtePdnSecDnsIpv6Addr,
cwceLteEpsBearerType,
cwceLteEpsArp,
cwceLteEpsQCI,
cwceLteEpsBearerResType,
cwceLteEpsGbr,
cwceLteEpsMbr,
cwceLteEpsAmbr,
cwceLteEpsTotalBytesTx,
cwceLteEpsTotalBytesRx,
cwceLteEpsPacketsTx,
cwceLteEpsPacketsRx
}
STATUS current
DESCRIPTION
"A collection of objects for Cellular 4G/LTE."
::= { ciscoWanCellExtMIBGroups 1 }
ciscoWanCellExtMIBNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cwceLteRsrqOnsetNotif,
cwceLteRsrqAbateNotif,
cwceLteRsrpOnsetNotif,
cwceLteRsrpAbateNotif
}
STATUS current
DESCRIPTION
"A collection of objects for Cellular WAN
notifications."
::= { ciscoWanCellExtMIBGroups 2 }
END
Reference in New Issue Copy Permalink