david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-WAN-OPTIMIZATION-MIB

3879 lines
139 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-WAN-OPTIMIZATION-MIB.my : A MIB for WAN Optimization
-- Features
--
-- October 2010, Chetan K Patel, Pooja Subramanya.
--
-- Copyright (c) 2010-2016 by cisco Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-WAN-OPTIMIZATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
NOTIFICATION-TYPE,
Counter64,
Unsigned32,
Gauge32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue,
TimeInterval,
DateAndTime,
TimeStamp
FROM SNMPv2-TC
CounterBasedGauge64
FROM HCNUM-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
CiscoMilliSeconds,
TimeIntervalSec,
Unsigned64
FROM CISCO-TC
cpmCPUTotalMonIntervalValue
FROM CISCO-PROCESS-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoWanOptimizationMIB MODULE-IDENTITY
LAST-UPDATED "201605220000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-waas@cisco.com, cs-waas-express@cisco.com"
DESCRIPTION
"This MIB is for managing Wide Area Network (WAN) Optimization
systems. The objective of WAN optimization system is to reduce
as much traffic as possible on WAN link and improve the
application response time for various applications, which gets
affected due to bandwidth, packet loss, congestion and latency
limitations of WAN link. WAN optimization system is generally
peer based system. They are located at both end of WAN link and
peer with each other to perform optimization. This MIB provides
instrumentation for monitoring statistics for various features
implemented for WAN optimization. WAN optimization features
includes TCP protocol optimizations and various Application
Optimizers (AOs). AOs include SMB AO, HTTP AO, CIFS AO, NFS AO,
MAPI AO, VIDEO AO, SSL AO and EPM AO.
Acronyms and Terminology used in this MIB are:
AO : Application Optimizer
TFO : Traffic Flow Optimization
SMB : Server Message Block
CIFS : Common Internet File System
HTTP : Hyper Text Transfer Protocol
NFS : Network File System
SSL : Secure Socket Layer
MAPI : Messaging Application Programming Interface
EPM : End Point Mapper
RA : Read Ahead
MD : Meta Data
PT : Pass Through
AD : Auto Discovery
RTT : Round Trip Time
Conn : Connections
File Server : SMB/CIFS file server
peer : It refers to peer WAN optimization system
located on other end of WAN and registered
with this device to optimize the traffic.
SharePoint : SharePoint is a Microsoft Application that
provides a collaborative environment for
using Microsoft Office and related
applications. Typical deployments of
Microsoft SharePoint use one or more
SharePoint servers in a server farm for
scalability. The actual data for the various
documents, etc. are usually stored in a
backend database. The SharePoint server(s)
communicate with the backend database using
SharePoint Back-end protocols. Clients
(either Microsoft Office Applications like
Word, Excel, PowerPoint or Web Browsers)
typically connect to the SharePoint server
and communicate using SOAP over HTTP.
Fast Connections : End to end connections which uses existing
TCP connection over WAN and reconstructs
only LAN connection is fast connection.
DRE : Data Redundancy Elimination.
LZ : Lemple-Ziv data compression.
PLZ : Persistent Lemple-Ziv data compression."
REVISION "201605220000Z"
DESCRIPTION
"Edited descriptions of CwoDreCacheStatus object.
Changed Max-Access of cwoDrePerfStatsEncodeCompressionRatio and
cwoDrePerfStatsDecodeCompressionRatio objects."
REVISION "201605180000Z"
DESCRIPTION
"Added cwoAoHttpxStatsAKC table for HTTP Akamai Cache objects.
Added cwoAoDre table for DRE objects."
REVISION "201511300000Z"
DESCRIPTION
"Deprecated cwoAoVideoxStats and cwoAoCifsxStats tables as all
the objects in them are deprecated."
REVISION "201305230000Z"
DESCRIPTION
"Added the below counters in cwoAoSmbxStats table Signed SMB
Bytes Stats enhancement feature
cwoAoSmbxStatsRdL4SignWANBytes
cwoAoSmbxStatsWrL4SignWANBytes
cwoAoSmbxStatsRdSignLANBytes
cwoAoSmbxStatsWrSignLANBytes"
REVISION "201212130000Z"
DESCRIPTION
"Added the below new counters which display SharePoint AO
statistics in cwoAoHttpxStats group.
cwoAoHttpxStatsTotalSPSessions
cwoAoHttpxStatsTotalSPPFSessions
cwoAoHttpxStatsTotalSPPFObjects
cwoAoHttpxStatsTotalSPRTTSaved
cwoAoHttpxStatsTotalSPPFMissTime
Added the below new counters in cwoAoCifsxStats group to support
the CIFS Atkins feature.
cwoAoCifsxStatsFFTotalReqs
cwoAoCifsxStatsFFRemoteReqs
cwoAoCifsxStatsFFLocalRespTime
cwoAoCifsxStatsFFRemoteRespTime
cwoAoCifsxStatsDirResources"
REVISION "201203050000Z"
DESCRIPTION
"(1) Added cwoAoStatsLoadStatus and cwoAoStatsBwOpt in
cwoAoStatsTable
(2) Added cwoAoSmbStatsBwOpt in cwoAoSmbxstats Group
(3) Added cwoAoHttpxStats - Statistics Group for HTTP AO
(4) Added cwoAoMapixStats - Statistics Group for MAPI AO
(5) Added cwoAoNfsxStats - Statistics Group for NFS AO
(6) Added cwoAoVideoxStats - Statistics Group for Video AO
(7) Added cwoAoCifsxstats - Statistics Group for CIFS AO
(8) Added cwoApp - Gorup which includes objects for
Applications associated with AOs.
(9) Added cwoPmap - Group which includes objects for
policy-map.
(10) Added cwoCmap - Group which includes objects for
class-maps associated with active policy-map.
(11) Addes cwoTfoStatsLoadStatus in cswTfoStats group"
REVISION "201104190000Z"
DESCRIPTION
"New License Notification Group has been added."
REVISION "201010260000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ciscoMgmt 762 }
CwoHttpAKCPrepStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents various Akamai cache preposition task status of a
HTTP application optimizer.
unknown(1) : The prepositioning task is in unknown state.
scheduled(2) : The prepositioning task is scheduled to run.
disabled(3) : The prepositioning task is disabled.
success(4) : The prepositioning task completed successfully.
error(5) : The prepositioning task has an error."
SYNTAX INTEGER {
unknown(1),
scheduled(2),
disabled(3),
success(4),
error(5)
}
CwoDreCacheStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents various DRE cache status of an application
optimizer.
notUsable(1) : This state indicates that DRE cache is
currently not usable/accessible
(eg.,when DRE partition is not
mounted/available).
initializing(2) : This state indicates that DRE cache is
getting initialized.
usable(3) : This state indicates that DRE cache is
accessible and in usable condition.
tempFailed(4) : This state indicates that DRE cache is
temporarily not available due to internal
errors.
failed(5) : This state indicates that DRE cache
initialization failed."
SYNTAX INTEGER {
notUsable(1),
initializing(2),
usable(3),
temporarilyFailed(4),
failed(5)
}
CwoAoName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the name of an Application Optimizer supported by
this system."
SYNTAX OCTET STRING (SIZE (1..96))
CwoAoOperationalState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents Various operational states of an Application
Optimizer.
shutdown : This state indicates that an AO is in shutdown
state.
initializing : This state indicates that an AO is getting
Initialized.
normalRunning : This state indicates that an AO is running
normally.
normalDisabled : This state indicates that an AO is in normal
disabled.
licenseExpired : This state indicates that license for an AO is
expired.
cleaningup : This state indicates that an AO is in cleaning
up state.
error : This state indicates that some error has
happened in AO operation."
SYNTAX INTEGER {
shutdown(1),
initializing(2),
normalRunning(3),
normalDisabled(4),
licenseExpired(5),
cleaningup(6),
error(7)
}
CwoLoadStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents load status of the system or feature.
unknown : This state is applicable when feature is not
active or disabled.
green : This state indicates that the feature is operating
normally, within acceptable load limits.
yellow : This state indicates that the feature is
overloaded, and new connections received by it
may not get optimized.
red : This state indicates that the feature is not
healthy, and existing as well as new
connections received by it may not get optimized."
SYNTAX INTEGER {
unknown(1),
green(2),
yellow(3),
red(4)
}
CwoTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents various types related to wan optimization system.
One such use is types of class-map and policy-map for wan
optimization syatem.
waas : It is used for wan optimization functionality.
appnav : It is used for application traffic redirection
to wan optimization systems."
SYNTAX INTEGER {
waas(1),
appnav(2)
}
-- Textual Conventions definition will be defined before this line
ciscoWanOptimizationMIBNotifs OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIB 0 }
ciscoWanOptimizationMIBObjects OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIB 1 }
-- Conformance Information
ciscoWanOptimizationMIBConform OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIB 3 }
ciscoWanOptimizationMIBCompliances OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBConform 1 }
-- General WAN Optimization Group. It contains general statistics
-- related to WAN Optimization system.
cwoGeneral OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBObjects 1 }
-- Traffic Flow Optimization Group.
cwoTfo OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBObjects 2 }
-- Statistics for AOs.
cwoAo OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBObjects 3 }
-- Application Group
cwoApp OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBObjects 4 }
-- Policy map Group
cwoPmap OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBObjects 5 }
-- Class map Group
cwoCmap OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBObjects 6 }
cwoDre OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBObjects 7 }
cwoGeneralActivePeers OBJECT-TYPE
SYNTAX Gauge32
UNITS "number of peers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of active peers connected
with this device for WAN optimization."
::= { cwoGeneral 1 }
cwoGeneralMaxActivePeers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains maximum number of peers that this device
can peer with for WAN optimization."
::= { cwoGeneral 2 }
cwoGeneralCpuThrottleHigh OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains high threshold (percentage) value of CPU
usage of system when WAN optimization feature is running. The
current CPU utilization, stored in cpmCPUTotalMonIntervalValue,
is compared against this value. A cwoCpuThrottlingOn
notification is generated whenever cpmCPUTotalMonIntervalValue
exceeds cwoGeneralCpuThrottleHigh for
cwoGeneralCpuThrottlPeriod."
::= { cwoGeneral 3 }
cwoGeneralCpuThrottleLow OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains low threshold (percentage) value of CPU
usage of system when WAN optimization feature is running. The
current CPU utilization, stored in cpmCPUTotalMonIntervalValue,
is
compared against this value. A cwoCpuThrottlingOff notification
is generated if a prior cwoCpuThrottlingOn notification was
generated, and the current value of cpmCPUTotalMonIntervalValue
is below cwoGeneralCpuThrottleLow for
cwoGeneralCpuThrottlPeriod.
Note that the value of cwoGeneralCpuThrottleLow must be less
than
or equal to cwoGeneralCpuThrottleHigh."
::= { cwoGeneral 4 }
cwoGeneralCpuThrottlPeriod OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object indicates CPU throttling observation period. The
value of the CPU utilization for this period is stored in
cpmCPUTotalMonIntervalValue. If the value of
cpmCPUTotalMonIntervalValue object is above
cwoGeneralCPUThrottleHigh, a cwoCPUThrottlingOn notification
is sent. If it is below cwoGeneralCPUThrottleLow, a
cwoCPUThrottlingOff notification is sent to the NMS."
::= { cwoGeneral 5 }
-- Statistics of TFO
cwoTfoStats OBJECT IDENTIFIER
::= { cwoTfo 1 }
cwoTfoStatsTotalOptConn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of TCP connections optimized
since TFO was started or its statistics were last reset."
::= { cwoTfoStats 1 }
cwoTfoStatsActiveOptConn OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of currently active TCP connections
getting optimized."
::= { cwoTfoStats 2 }
cwoTfoStatsMaxActiveConn OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains maximum number of active TCP connections
that this device can optimize."
::= { cwoTfoStats 3 }
cwoTfoStatsActiveOptTCPPlusConn OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of active TCP connections going
through TCP plus other optimization."
::= { cwoTfoStats 4 }
cwoTfoStatsActiveOptTCPOnlyConn OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of active connections going through
only TCP optimization."
::= { cwoTfoStats 5 }
cwoTfoStatsActiveOptTCPPrepConn OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of current active TCP connections
that were originated by an accelerator to acquire data in
anticipation of its future use."
::= { cwoTfoStats 6 }
cwoTfoStatsActiveADConn OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of current active TCP connections
in the auto-discovery state."
::= { cwoTfoStats 7 }
cwoTfoStatsReservedConn OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of TCP connections reserved for the
MAPI accelerator."
::= { cwoTfoStats 8 }
cwoTfoStatsPendingConn OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of TCP connections, which are
pending in queue of connections to be optimized."
::= { cwoTfoStats 9 }
cwoTfoStatsActivePTConn OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of active Pass Through TCP
connections. Connections which are not selected for optimization
are called Pass Through."
::= { cwoTfoStats 10 }
cwoDreCacheStats OBJECT IDENTIFIER
::= { cwoDre 1 }
cwoDrePerfStats OBJECT IDENTIFIER
::= { cwoDre 2 }
cwoDreCacheStatsStatus OBJECT-TYPE
SYNTAX CwoDreCacheStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the status of the portion of the disk
that is meant for DRE cache."
::= { cwoDreCacheStats 1 }
cwoDreCacheStatsAge OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the age of the oldest data present in the
DRE cache. For example, let us say that the portion of the disk
space allocated for DRE cache is 1GB and it is full. Now, if
new data is written onto this cache, then it would replace the
oldest data in the cache in First-In-First-Out (FIFO) order.
This object will specify what is the oldest data now present in
the cache. It takes the format of <x>d<x>h<x>m, where 'x' is an
integer number. For example, 6d20h30m means that the oldest
data's age is 6 days, 20 hours and 30 minutes."
::= { cwoDreCacheStats 2 }
cwoDreCacheStatsTotal OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of available disk space
for DRE cache. For example, if the total disk space is 202 GB
and let us say that 20% of this disk space is allocated for DRE
cache, then this would mean that 40GB (40960 MB) out of the
total disk space is allocated for DRE cache."
::= { cwoDreCacheStats 3 }
cwoDreCacheStatsUsed OBJECT-TYPE
SYNTAX Gauge32
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of DRE disk space
currently used out of the total space allocated for DRE cache.
For example, if the disk space allocated for DRE cache is
972798MB and if this object indicates 1%, it means that 9727 MB
is used and remaining approximate 963071 MB of disk space is
free."
::= { cwoDreCacheStats 4 }
cwoDreCacheStatsDataUnitUsage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates DRE disk space currently used by data
unit. DRE stores the actual data as data units in data block
and the metadata (chuck signature) in signature block."
::= { cwoDreCacheStats 5 }
cwoDreCacheStatsReplacedOneHrDataUnit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the amount of data unit replaced in the
last one hour in DRE cache. DRE stores the actual data as data
units in the cache data block. If new data units have to be
stored in the cache, the older data units in the cache are
evicted in First-In-First-Out (FIFO) order. This object would
also indicate how much new data units have been stored in the
DRE cache in the past one hour."
::= { cwoDreCacheStats 6 }
cwoDreCacheStatsDataUnitAge OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the age of oldest data unit in the data
block. DRE stores the actual data as data units in the data
block and the metadata (chuck signature) in signature block. If
new data unit should be written to the data block when it is
full, then the oldest data unit currently present in the data
block will be evicted. So this object would indicate the age
of the oldest data unit present in the DRE cache. It takes the
format of <x>d<x>h<x>m, where 'x' is an integer number. For
example, 6d20h30m means that the oldest data's age is 6 days, 20
hours and 30 minutes."
::= { cwoDreCacheStats 7 }
cwoDreCacheStatsSigblockUsage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates DRE disk space currently used by sigblock
or signature block. DRE stores the actual data as data units in
cache data block and the metadata (chuck signature) in
signature block."
::= { cwoDreCacheStats 8 }
cwoDreCacheStatsReplacedOneHrSigblock OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the amount of signatures replaced in last
one hour in sigblock. DRE stores the metadata (chuck signature)
in signature block of DRE cache. If new signatures have to be
stored in the cache, the older signatures in the sigblock are
evicted in First-In-First-Out (FIFO) order. This object would
also indicate how much new signatures have been stored in the
DRE cache sigblock in the past one hour."
::= { cwoDreCacheStats 9 }
cwoDreCacheStatsSigblockAge OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the age of oldest signature in the
sigblock. DRE stores the actual data as data units in the data
block and the metadata (chuck signature) in signature block.
If a new signature should be written to the sigblock when it is
full, then the oldest signature currently present in the
sigblock will be evicted. So this object would indicate the age
of the oldest signature present in the DRE cache. It takes the
format of <x>d<x>h<x>m, where 'x' is an integer number. For
example, 6d20h30m means that the oldest data's age is 6 days, 20
hours and 30 minutes."
::= { cwoDreCacheStats 10 }
cwoDrePerfStatsEncodeCompressionRatio OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total compression ratio provided by
all the DRE components - DRE, LZ and PLZ (if applicable), during
the encoding process. It is the ratio of the number of bytes
entering the DRE module (from LAN side) and the number of bytes
exiting the DRE module (from WAN side). This object indicates
the value that is calculated since the last time the counter was
cleared. The calculation is not based on per-connection or
per-peer basis."
::= { cwoDrePerfStats 1 }
cwoDrePerfStatsEncodeCompressionLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the processing latency that is introduced
by DRE/LZ/PLZ processes during the encoding of data that is
coming into the DRE module.
The encoding process comprises of dividing the input data into
chunks and calculating the signature of every chunk. This
encoding process would add certain latency. Then the LZ
compression would add further latency. This object indicates
the value that is calculated since the last time the counter was
cleared. The calculation is not based on per-connection or
per-peer basis."
::= { cwoDrePerfStats 2 }
cwoDrePerfStatsEncodeAvgMsgSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average size of all the messages
handled by DRE during encoding (i.e., for all the messages
received from the LAN side). The message size is an important
factor in performance of DRE. This object indicates the value
that is calculated since the last time the counter was cleared.
The calculation is not based on per-connection or per-peer
basis."
::= { cwoDrePerfStats 3 }
cwoDrePerfStatsDecodeCompressionRatio OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total compression ratio provided by
all the DRE components - DRE, LZ and PLZ (if applicable),
during the decoding process. It is the ratio of the number of
bytes entering the DRE module (from WAN side) and the number of
bytes exiting the DRE module (from LAN side). This object
indicates the value that is calculated since the last time the
counter was cleared. The calculation is not based on
per-connection or per-peer basis."
::= { cwoDrePerfStats 4 }
cwoDrePerfStatsDecodeCompressionLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the processing latency that is introduced
by DRE/LZ/PLZ processes during the decoding of data that is
coming into the DRE module.
The LZ decompression (for applicable data) would add certain
latency. Then the decoding process that involves a lot of
signature look-up for disk IO and data fetch from the data unit
for recreation of original data, would add further latency.
This object indicates the value that is calculated since the
last
time the counter was cleared. The calculation is not based on
per-connection or per-peer basis."
::= { cwoDrePerfStats 5 }
cwoDrePerfStatsDecodeAvgMsgSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average size of all the messages
handled by DRE during decoding (i.e., for all the messages
received from the WAN side). The message size is an important
factor in performance of DRE. This object indicates the value
that is calculated since the last time the counter was cleared.
The calculation is not based on per-connection or per-peer
basis."
::= { cwoDrePerfStats 6 }
cwoTfoStatsTotalNormalClosedConn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of optimized TCP connections
which were closed normally since TFO was started or its
statistics were last reset."
::= { cwoTfoStats 11 }
cwoTfoStatsResetConn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of optimized TCP connections,
which are reset since TFO was started or its statistics were
last reset."
::= { cwoTfoStats 12 }
cwoTfoStatsLoadStatus OBJECT-TYPE
SYNTAX CwoLoadStates
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the load status of Traffic Flow Optimizer
(TFO)."
::= { cwoTfoStats 13 }
-- Statistics table of AO
cwoAoStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwoAoStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table gives statistics of Application Optimizers."
::= { cwoAo 1 }
cwoAoStatsEntry OBJECT-TYPE
SYNTAX CwoAoStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing statistics for particular Application
optimizer. An entry will be created during system startup and
will include AOs, which are supported by this system."
INDEX { cwoAoStatsName }
::= { cwoAoStatsTable 1 }
CwoAoStatsEntry ::= SEQUENCE {
cwoAoStatsName CwoAoName,
cwoAoStatsIsConfigured TruthValue,
cwoAoStatsIsLicensed TruthValue,
cwoAoStatsOperationalState CwoAoOperationalState,
cwoAoStatsStartUpTime DateAndTime,
cwoAoStatsLastResetTime DateAndTime,
cwoAoStatsTotalHandledConns Counter32,
cwoAoStatsTotalOptConns Counter32,
cwoAoStatsTotalHandedOffConns Counter32,
cwoAoStatsTotalDroppedConns Counter32,
cwoAoStatsActiveOptConns Gauge32,
cwoAoStatsPendingConns Gauge32,
cwoAoStatsMaxActiveOptConns Unsigned32,
cwoAoStatsLoadStatus CwoLoadStates,
cwoAoStatsBwOpt Gauge32
}
cwoAoStatsName OBJECT-TYPE
SYNTAX CwoAoName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents name of the AO."
::= { cwoAoStatsEntry 1 }
cwoAoStatsIsConfigured OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the AO is configured or not. If
AO is not configured then the operational state
(cwoAoStatsOperationalState) of AO would be 'shutdown'."
::= { cwoAoStatsEntry 2 }
cwoAoStatsIsLicensed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether license for the AO is valid or
not. If License for AO is not valid then operational state
(cwoAoStatsOperationalState) of AO would be 'shutdown'."
::= { cwoAoStatsEntry 3 }
cwoAoStatsOperationalState OBJECT-TYPE
SYNTAX CwoAoOperationalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates operational state of the AO. If AO is not
configured or license is not valid for this AO then operational
state of AO would be 'shutdown'."
::= { cwoAoStatsEntry 4 }
cwoAoStatsStartUpTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains date and time when AO was started. This
object will hold NULL value when AO is in shutdown state."
::= { cwoAoStatsEntry 5 }
cwoAoStatsLastResetTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains date and time when statistics of AO were
set to reset last time. When statistics of AO set to reset then
all statistics counters will also set to reset. This object will
hold NULL value when AO is in shutdown state."
::= { cwoAoStatsEntry 6 }
cwoAoStatsTotalHandledConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of connections handled by AO
since it was started or its statistics were last reset."
::= { cwoAoStatsEntry 7 }
cwoAoStatsTotalOptConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of connections optimized by
AO since it was started or its statistics were last reset."
::= { cwoAoStatsEntry 8 }
cwoAoStatsTotalHandedOffConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of connections handed off to
Generic optimization by AO since it was started or its
statistics last reset."
::= { cwoAoStatsEntry 9 }
cwoAoStatsTotalDroppedConns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of connections dropped by AO
since it was started or its statistics were last reset."
::= { cwoAoStatsEntry 10 }
cwoAoStatsActiveOptConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of active connections which are
getting optimized by AO."
::= { cwoAoStatsEntry 11 }
cwoAoStatsPendingConns OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of connections currently pending in
queue of connections to be optimized by AO."
::= { cwoAoStatsEntry 12 }
cwoAoStatsMaxActiveOptConns OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains maximum number of active TCP connections
that AO can optimize."
::= { cwoAoStatsEntry 13 }
cwoAoStatsLoadStatus OBJECT-TYPE
SYNTAX CwoLoadStates
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the load status of an AO."
::= { cwoAoStatsEntry 14 }
cwoAoStatsBwOpt OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage bandwidth optimization
achieved due to optimizations done by an AO."
::= { cwoAoStatsEntry 15 }
-- Extended statistics for SMB AO
cwoAoSmbxStats OBJECT IDENTIFIER
::= { cwoAo 2 }
cwoAoSmbxStatsBytesReadCache OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of bytes read from SMB
Application Optimizer cache (Read-ahead and Metadata cache)
since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 1 }
cwoAoSmbxStatsBytesWriteCache OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of bytes written to SMB
Application Optimizer cache (Read-ahead and Metadata) since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 2 }
cwoAoSmbxStatsBytesReadServer OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of bytes read from file
servers by SMB Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 3 }
cwoAoSmbxStatsBytesWriteServer OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of bytes written to file
servers by SMB Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 4 }
cwoAoSmbxStatsBytesReadClient OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of bytes read by SMB
Application Optimizer clients since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 5 }
cwoAoSmbxStatsBytesWriteClient OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of bytes written by SMB
Application optimizer clients since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 6 }
cwoAoSmbxStatsProcessedReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of requests processed by SMB
Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 7 }
cwoAoSmbxStatsActiveReqs OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of active requests getting
processed by SMB Application Optimizer."
::= { cwoAoSmbxStats 8 }
cwoAoSmbxStatsTotalTimedOutReqs OBJECT-TYPE
SYNTAX Unsigned64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of requests timed out in SMB
Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 9 }
cwoAoSmbxStatsTotalRemoteReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of SMB requests sent to
remote file server since SMB AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 10 }
cwoAoSmbxStatsTotalLocalReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of SMB requests served
locally by SMB Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 11 }
cwoAoSmbxStatsRemoteAvgTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains average duration of time taken by SMB
Application Optimizer to process all remote requests since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 12 }
cwoAoSmbxStatsLocalAvgTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains average duration of time taken by SMB
Application Optimizer to process all local requests since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 13 }
cwoAoSmbxStatsRACacheHitCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains SMB Application Optimizer Read Ahead Cache
hit count since SMB AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 14 }
cwoAoSmbxStatsMDCacheHitCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains SMB Application Optimizer Metadata cache
hit count since SMB AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 15 }
cwoAoSmbxStatsRACacheHitRate OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains SMB Application Optimizer Read Ahead cache
hit rate since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 16 }
cwoAoSmbxStatsMDCacheHitRate OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains SMB Application Optimizer Metadata cache
hit rate since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 17 }
cwoAoSmbxStatsMaxRACacheSize OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains Maximum disk space that can be allocated
for Read Ahead data in SMB Application Optimizer cache."
::= { cwoAoSmbxStats 18 }
cwoAoSmbxStatsMaxMDCacheSize OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains maximum disk space that can be allocated
for Metadata in SMB Application Optimizer cache."
::= { cwoAoSmbxStats 19 }
cwoAoSmbxStatsMDCacheSize OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains current size of Metadata cache in SMB
Application Optimizer."
::= { cwoAoSmbxStats 20 }
cwoAoSmbxStatsRAEvictedAge OBJECT-TYPE
SYNTAX CiscoMilliSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains amount of time spent in the SMB
Application Optimizer Read Ahead cache by the resource that was
last evicted since last update. If this amount is too short or
too long, it is recommended to modify the size of the cache."
::= { cwoAoSmbxStats 21 }
cwoAoSmbxStatsRTT OBJECT-TYPE
SYNTAX TimeIntervalSec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total round trip time for all SMB
connections since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 22 }
cwoAoSmbxStatsTotalRespTimeSaving OBJECT-TYPE
SYNTAX TimeIntervalSec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total response time saved due to SMB AO
optimizations since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 23 }
cwoAoSmbxStatsOpenFiles OBJECT-TYPE
SYNTAX Gauge32
UNITS "files"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains number of files currently opened by SMB
Application Optimizer."
::= { cwoAoSmbxStats 24 }
cwoAoSmbxStatsTotalFilesInRACache OBJECT-TYPE
SYNTAX Gauge32
UNITS "files"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total number of files in SMB Application
optimizer Read Ahead cache."
::= { cwoAoSmbxStats 25 }
cwoAoSmbxStatsRdL4SignWANBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of Layer 4 (L4) optimized
signed bytes read from WAN by SMB Application Optimizer since
the SMB Application Optimizer was started. L4 optimization
comprises of TFO, DRE and LZ optimizations.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 26 }
cwoAoSmbxStatsWrL4SignWANBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of Layer 4 (L4) optimized
signed bytes written to WAN by SMB Application Optimizer since
SMB Application Optimizer was started. L4 optimization comprises
of TFO, DRE and LZ optimizations.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 27 }
cwoAoSmbxStatsRdSignLANBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of signed bytes read from
LAN by SMB Application Optimizer since the SMB Application
Optimizer was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 28 }
cwoAoSmbxStatsWrSignLANBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of original signed bytes
written to LAN by SMB Application Optimizer since SMB
Application Optimizer was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO."
::= { cwoAoSmbxStats 29 }
-- Extended statistics for HTTP AO
cwoAoHttpxStats OBJECT IDENTIFIER
::= { cwoAo 3 }
cwoAoHttpxStatsTotalSavedTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total time saved due to optimizations
done by HTTP AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO."
::= { cwoAoHttpxStats 1 }
cwoAoHttpxStatsTotalRTT OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total Round Trip Time (RTT) for all the
connections going through HTTP AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO."
::= { cwoAoHttpxStats 2 }
cwoAoHttpxStatsTotalMDCMTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total time for Meta Data Cache Misses
(MDCM) for HTTP AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO."
::= { cwoAoHttpxStats 3 }
cwoAoHttpxStatsEstSavedTime OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates percentage estimated time saved due to
optimizations done by HTTP AO since it was started."
::= { cwoAoHttpxStats 4 }
cwoAoHttpxStatsTotalSPSessions OBJECT-TYPE
SYNTAX Counter64
UNITS "sessions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of SharePoint Optimized
HTTP sessions. This counter is incremented for every
session on which SharePoint optimization can be performed. An
HTTP session is tagged as a SharePoint Session based on the
information present in the HTTP request."
::= { cwoAoHttpxStats 5 }
cwoAoHttpxStatsTotalSPPFSessions OBJECT-TYPE
SYNTAX Counter64
UNITS "sessions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of SharePoint Pre-fetch
optimized HTTP sessions. This counter is incremented
for every session on which SharePoint pre-fetch optimization
can be performed. An HTTP session is tagged as a SharePoint
pre-fetch Session based on the information present in the HTTP
request. A pre-fetch operation is one where the edge WAAS
device fetches the next set of data (which it anticipates the
client will request later) from the server based on the current
HTTP Request information."
::= { cwoAoHttpxStats 6 }
cwoAoHttpxStatsTotalSPPFObjects OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of pre-fetched objects
served locally for SharePoint pre-fetch sessions. The edge WAAS
device maintains a local cache where the pre-fetched responses
are saved. This object is incremented whenever the SharePoint
client request is served from the pre-fetch cache."
::= { cwoAoHttpxStats 7 }
cwoAoHttpxStatsTotalSPRTTSaved OBJECT-TYPE
SYNTAX Counter64
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains total Round Trip Time (RTT) saved due to
SharePoint pre-fetch optimizations since SharePoint pre-fetch
optimization was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO."
::= { cwoAoHttpxStats 8 }
cwoAoHttpxStatsTotalSPPFMissTime OBJECT-TYPE
SYNTAX Counter64
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total time for SharePoint pre-fetch
Cache Misses since SharePoint pre-fetch optimization was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO."
::= { cwoAoHttpxStats 9 }
cwoAoHttpxStatsAKC OBJECT IDENTIFIER
::= { cwoAoHttpxStats 10 }
cwoAoHttpxStatsAKCBypassEntry OBJECT IDENTIFIER
::= { cwoAoHttpxStatsAKC 1 }
cwoAoHttpxStatsAKCStdEntry OBJECT IDENTIFIER
::= { cwoAoHttpxStatsAKC 2 }
cwoAoHttpxStatsAKCBasicEntry OBJECT IDENTIFIER
::= { cwoAoHttpxStatsAKC 3 }
cwoAoHttpxStatsAKCAdvEntry OBJECT IDENTIFIER
::= { cwoAoHttpxStatsAKC 4 }
cwoAoHttpxStatsAKCTotalEntry OBJECT IDENTIFIER
::= { cwoAoHttpxStatsAKC 5 }
cwoAoHttpxStatsAKCPrepTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwoAoHttpxStatsAKCPrepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table gives statistics of Akamai Preposition tasks."
::= { cwoAoHttpxStatsAKC 6 }
cwoAoHttpxStatsAKCPrepEntry OBJECT-TYPE
SYNTAX CwoAoHttpxStatsAKCPrepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing statistics for a particular Akamai
Preposition task."
INDEX { cwoAoHttpxStatsAKCPrepTaskName }
::= { cwoAoHttpxStatsAKCPrepTable 1 }
CwoAoHttpxStatsAKCPrepEntry ::= SEQUENCE {
cwoAoHttpxStatsAKCPrepTaskName OCTET STRING,
cwoAoHttpxStatsAKCPrepStatus CwoHttpAKCPrepStatus,
cwoAoHttpxStatsAKCPrepCacheStoreBytes Gauge32,
cwoAoHttpxStatsAKCPrepUncacheStoreBytes Gauge32
}
cwoAoHttpxStatsAKCPrepTaskName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the preposition task in
Akamai connected cache preposition operation."
::= { cwoAoHttpxStatsAKCPrepEntry 1 }
cwoAoHttpxStatsAKCPrepStatus OBJECT-TYPE
SYNTAX CwoHttpAKCPrepStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of the preposition
task in Akamai connected cache preposition operation."
::= { cwoAoHttpxStatsAKCPrepEntry 2 }
cwoAoHttpxStatsAKCPrepCacheStoreBytes OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of response bytes stored
in the cache for a particular preposition task in Akamai
connected cache preposition operation."
::= { cwoAoHttpxStatsAKCPrepEntry 3 }
cwoAoHttpxStatsAKCPrepUncacheStoreBytes OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of response bytes not
stored in the cache for a particular preposition task in Akamai
connected cache preposition operation."
::= { cwoAoHttpxStatsAKCPrepEntry 4 }
cwoAoHttpxStatsAKCBypassCacheTrans OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Akamai connected cache statistics for
total number of cache-bypass transactions that were handled in
bypass mode transparent cache profile. When bypass mode
transparent cache profile is set for a particular hostname, the
caching for the hostname specified in a rule is suppressed. In
this mode, the cache-engine turns off caching for one or more
configured sites."
::= { cwoAoHttpxStatsAKCBypassEntry 1 }
cwoAoHttpxStatsAKCBypassRespBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of response bytes saved
for cache-hit HTTP transactions in bypass mode transparent
cache profile."
::= { cwoAoHttpxStatsAKCBypassEntry 2 }
cwoAoHttpxStatsAKCBypassCacheTransPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
cache-hit HTTP transactions in bypass mode transparent cache
profile."
::= { cwoAoHttpxStatsAKCBypassEntry 3 }
cwoAoHttpxStatsAKCBypassRespBytesPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in bypass
mode transparent cache profile."
::= { cwoAoHttpxStatsAKCBypassEntry 4 }
cwoAoHttpxStatsAKCBypassCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total response time saved for
cache-hit HTTP transactions in bypass mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCBypassEntry 5 }
cwoAoHttpxStatsAKCBypassAvgCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average response time saved per
cache-hit HTTP transaction in bypass mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCBypassEntry 6 }
cwoAoHttpxStatsAKCBypassRespTimeSavedPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total response time
saved for cache-hit HTTP transactions in bypass mode
transparent cache profile."
::= { cwoAoHttpxStatsAKCBypassEntry 7 }
cwoAoHttpxStatsAKCStdCacheTrans OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Akamai connected cache statistics for
total number of cache-hit transactions that were served from
cache in standard mode transparent cache profile. This is a
default mode.In this mode, the cache engine also follows the
RFC-2616 behavior for cache control headers with the exception
of not honoring the client cache override behavior."
::= { cwoAoHttpxStatsAKCStdEntry 1 }
cwoAoHttpxStatsAKCStdRespBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of response bytes saved
for cache-hit HTTP transactions in standard mode transparent
cache profile."
::= { cwoAoHttpxStatsAKCStdEntry 2 }
cwoAoHttpxStatsAKCStdCacheTransPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
cache-hit HTTP transactions in standard mode transparent cache
profile."
::= { cwoAoHttpxStatsAKCStdEntry 3 }
cwoAoHttpxStatsAKCStdRespBytesPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in standard
mode transparent cache profile."
::= { cwoAoHttpxStatsAKCStdEntry 4 }
cwoAoHttpxStatsAKCStdCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total response time saved for
cache-hit HTTP transactions in standard mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCStdEntry 5 }
cwoAoHttpxStatsAKCStdAvgCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average response time saved per
cache-hit HTTP transaction in standard mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCStdEntry 6 }
cwoAoHttpxStatsAKCStdRespTimeSavedPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total response time
saved for cache-hit HTTP transactions in standard mode
transparent cache profile."
::= { cwoAoHttpxStatsAKCStdEntry 7 }
cwoAoHttpxStatsAKCBasicCacheTrans OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Akamai connected cache statistics for
total number of cache-hit transactions that were served from
cache in basic mode transparent cache profile. In this mode, the
cache engine works in strict RFC-2616 behavior, and therefore,
only caches responses that are marked explicitly as cacheable
with cache-control headers or responses that have an expiry
header to service and accelerate traffic from a datacenter to a
branch office over any type of IP network."
::= { cwoAoHttpxStatsAKCBasicEntry 1 }
cwoAoHttpxStatsAKCBasicRespBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of response bytes saved
for cache-hit HTTP transactions in basic mode transparent cache
profile."
::= { cwoAoHttpxStatsAKCBasicEntry 2 }
cwoAoHttpxStatsAKCBasicCacheTransPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
cache-hit HTTP transactions in basic mode transparent cache
profile."
::= { cwoAoHttpxStatsAKCBasicEntry 3 }
cwoAoHttpxStatsAKCBasicRespBytesPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in basic
mode transparent cache profile."
::= { cwoAoHttpxStatsAKCBasicEntry 4 }
cwoAoHttpxStatsAKCBasicCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total response time saved for
cache-hit HTTP transactions in basic mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCBasicEntry 5 }
cwoAoHttpxStatsAKCBasicAvgCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average response time saved per
cache-hit HTTP transaction in basic mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCBasicEntry 6 }
cwoAoHttpxStatsAKCBasicRespTimeSavedPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total response time
saved for cache-hit HTTP transactions in basic mode transparent
cache profile."
::= { cwoAoHttpxStatsAKCBasicEntry 7 }
cwoAoHttpxStatsAKCAdvCacheTrans OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Akamai connected cache statistics for
total number of cache-hit transactions that were served from
cache in advanced mode transparent cache profile. In advanced
mode,the cache engine caches media types more aggressively, and
caches all object types for longer time (when there is no
explicit expiration time)."
::= { cwoAoHttpxStatsAKCAdvEntry 1 }
cwoAoHttpxStatsAKCAdvRespBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of response bytes saved
for cache-hit HTTP transactions in advanced mode transparent
cache profile."
::= { cwoAoHttpxStatsAKCAdvEntry 2 }
cwoAoHttpxStatsAKCAdvCacheTransPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
cache-hit HTTP transactions in advanced mode transparent cache
profile."
::= { cwoAoHttpxStatsAKCAdvEntry 3 }
cwoAoHttpxStatsAKCAdvRespBytesPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in
advanced mode transparent cache profile."
::= { cwoAoHttpxStatsAKCAdvEntry 4 }
cwoAoHttpxStatsAKCAdvCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total response time saved for
cache-hit HTTP transactions in advanced mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCAdvEntry 5 }
cwoAoHttpxStatsAKCAdvAvgCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average response time saved per
cache-hit HTTP transaction in advanced mode transparent cache
profile, in milli-seconds."
::= { cwoAoHttpxStatsAKCAdvEntry 6 }
cwoAoHttpxStatsAKCAdvRespTimeSavedPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total response time
saved for cache-hit HTTP transactions in advanced mode
transparent cache profile."
::= { cwoAoHttpxStatsAKCAdvEntry 7 }
cwoAoHttpxStatsAKCTotalCacheTrans OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the aggregation of all the statistics
related to various Akamai Connected Cache profile types -
Bypass, Standard, Basic and Advanced."
::= { cwoAoHttpxStatsAKCTotalEntry 1 }
cwoAoHttpxStatsAKCTotalRespBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of response bytes saved
for cache-hit HTTP transactions in all transparent cache
profile modes."
::= { cwoAoHttpxStatsAKCTotalEntry 2 }
cwoAoHttpxStatsAKCTotalCacheTransPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
cache-hit HTTP transactions in all transparent cache profile
modes."
::= { cwoAoHttpxStatsAKCTotalEntry 3 }
cwoAoHttpxStatsAKCTotalRespBytesPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in all
transparent cache profile modes."
::= { cwoAoHttpxStatsAKCTotalEntry 4 }
cwoAoHttpxStatsAKCTotalCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total response time saved for
cache-hit HTTP transactions in all transparent cache profile
modes, in milli-seconds."
::= { cwoAoHttpxStatsAKCTotalEntry 5 }
cwoAoHttpxStatsAKCTotalAvgCacheRespTimeSaved OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the average response time saved per
cache-hit HTTP transaction in all transparent cache profile
modes, in milli-seconds."
::= { cwoAoHttpxStatsAKCTotalEntry 6 }
cwoAoHttpxStatsAKCTotalRespTimeSavedPercent OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the percentage of total response time
saved for Cache-hit HTTP transactions in all transparent cache
profile modes."
::= { cwoAoHttpxStatsAKCTotalEntry 7 }
-- Extended statistics for MAPI AO
cwoAoMapixStats OBJECT IDENTIFIER
::= { cwoAo 4 }
cwoAoMapixStatsUnEncrALRT OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Average Local Response Time (ALRT) for
unencrypted connections of MAPI AO since it was started."
::= { cwoAoMapixStats 1 }
cwoAoMapixStatsEncrALRT OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Average Local Response Time (ALRT) for
encrypted connections of MAPI AO since it was started."
::= { cwoAoMapixStats 2 }
cwoAoMapixStatsUnEncrARRT OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Average Remote Response Time (ARRT) for
unencrypted connections of MAPI AO since it was started."
::= { cwoAoMapixStats 3 }
cwoAoMapixStatsEncrARRT OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Average Remote Response Time (ARRT) for
encrypted connections of MAPI AO since it was started."
::= { cwoAoMapixStats 4 }
cwoAoMapixStatsTotalUnEncrLRs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total requests served locally for
unencrypted connections by MAPI AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO."
::= { cwoAoMapixStats 5 }
cwoAoMapixStatsTotalEncrLRs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total requests served locally for
encrypted connections by MAPI AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO."
::= { cwoAoMapixStats 6 }
cwoAoMapixStatsTotalUnEncrRRs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total Remote Requests(RR) served by
remote servers for unencrypted connections of MAPI AO since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO."
::= { cwoAoMapixStats 7 }
cwoAoMapixStatsTotalEncrRRs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total Remote Requests(RR) served by
remote servers for encrypted connections by MAPI AO since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO."
::= { cwoAoMapixStats 8 }
cwoAoMapixStatsUnEncrAvgRedTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates average time reduced for unencrypted
connections due to optimizations done by MAPI AO since it was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO."
::= { cwoAoMapixStats 9 }
cwoAoMapixStatsEncrAvgRedTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates average time reduced for encrypted
connections due to optimizations done by MAPI AO since it was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO."
::= { cwoAoMapixStats 10 }
-- Extended statistics for NFS AO
cwoAoNfsxStats OBJECT IDENTIFIER
::= { cwoAo 5 }
cwoAoNfsxStatsALRT OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Average Local Response Time (ALRT) for
NFS AO since it was started."
::= { cwoAoNfsxStats 1 }
cwoAoNfsxStatsARRT OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Average Remote Response Time (ARRT) for
NFS AO since it was started."
::= { cwoAoNfsxStats 2 }
cwoAoNfsxStatsTotalLRs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total requests served locally by NFS AO
since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the NFS AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the NFS
AO."
::= { cwoAoNfsxStats 3 }
cwoAoNfsxStatsTotalRRs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total Remote Requests (RR) served by
remote servers for NFS AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the NFS AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the NFS
AO."
::= { cwoAoNfsxStats 4 }
cwoAoNfsxStatsEstTimeSaved OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates percentage estimated time saved due to
optimizations done by NFS AO since it was started."
::= { cwoAoNfsxStats 5 }
-- Extended statistics for Video AO
cwoAoVideoxStats OBJECT IDENTIFIER
::= { cwoAo 6 }
cwoAoVideoxStatsTotalInBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates total incoming bytes for Video AO since
it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the Video AO. The last discontinuity time
is indicated by the value of cwoAoStatsLastResetTime for the
Video AO."
::= { cwoAoVideoxStats 1 }
cwoAoVideoxStatsTotalOutBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates total outgoing bytes for Video AO since
it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the Video AO. The last discontinuity time
is indicated by the value of cwoAoStatsLastResetTime for the
Video AO."
::= { cwoAoVideoxStats 2 }
-- Extended Statistics for CIFS AO
cwoAoCifsxStats OBJECT IDENTIFIER
::= { cwoAo 7 }
cwoAoCifsxStatsTotalReadBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the total bytes read by clients
from the client side (via cache or remotely) using CIFS AO
since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 1 }
cwoAoCifsxStatsTotalWrittenBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the total bytes written to the
client-side using the CIFS AO since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 2 }
cwoAoCifsxStatsTotalRemoteReqs OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the total requests sent to remote file
server since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 3 }
cwoAoCifsxStatsTotalLocalReqs OBJECT-TYPE
SYNTAX Counter32
UNITS "requests"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the total number requests served locally
by CIFS AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 4 }
cwoAoCifsxStatsTotalRemoteTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the total duration of time taken by CIFS
AO to process all remote requests since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 5 }
cwoAoCifsxStatsTotalLocalTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the total duration of time taken by CIFS
AO to process all local requests since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 6 }
cwoAoCifsxStatsConnectedSessions OBJECT-TYPE
SYNTAX Gauge32
UNITS "sessions"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of currently connected CIFS
sessions."
::= { cwoAoCifsxStats 7 }
cwoAoCifsxStatsOpenFiles OBJECT-TYPE
SYNTAX Gauge32
UNITS "files"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of currently open CIFS files."
::= { cwoAoCifsxStats 8 }
cwoAoCifsxStatsMaxCacheSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the maximum disk space (in KB) allocated
for data in the CIFS AO cache."
::= { cwoAoCifsxStats 9 }
cwoAoCifsxStatsCurrentCacheSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the amount of disk space (in KB),
currently being used for data in the CIFS AO cache."
::= { cwoAoCifsxStats 10 }
cwoAoCifsxStatsMaxCacheResources OBJECT-TYPE
SYNTAX Gauge32
UNITS "files"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the maximum number of cache resources
(files and directories) supported by the CIFS AO cache,
regardless of the size of these resources."
::= { cwoAoCifsxStats 11 }
cwoAoCifsxStatsCacheResources OBJECT-TYPE
SYNTAX Gauge32
UNITS "files"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of cache resources (files
and directories) currently held in the CIFS AO cache."
::= { cwoAoCifsxStats 12 }
cwoAoCifsxStatsEvictedResources OBJECT-TYPE
SYNTAX Counter32
UNITS "files"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of cache resources (files and
directories) that have been evicted from the cache since CIFS
AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 13 }
cwoAoCifsxStatsLastEvictedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the time when cache resources (files and
directories) were last evicted from the CIFS AO cache. 00:00 is
displayed if no cache resources have been evicted since CIFS AO
was started."
::= { cwoAoCifsxStats 14 }
cwoAoCifsxStatsVolHiWatermark OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the disk usage high watermark in
percentage that triggers the eviction of resources from the
CIFS AO cache."
::= { cwoAoCifsxStats 15 }
cwoAoCifsxStatsVolLoWatermark OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the target disk usage low watermark
percentage to be reached via cache eviction when triggered by
cfVolHiWatermark. When this low watermark is reached, cache
eviction stops."
::= { cwoAoCifsxStats 16 }
cwoAoCifsxStatsAmntHiWatermark OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the target percentage of maximum cache
resources (defined by cfMaxCacheResources) that triggers the
eviction of resources from the CIFS AO cache."
::= { cwoAoCifsxStats 17 }
cwoAoCifsxStatsAmntLoWatermark OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the target percentage of maximum cache
resources (defined by cfMaxCacheResources) to be reached via
cache eviction when triggered by cfAmntHiWatermark. When this
low watermark is reached, cache eviction stops."
::= { cwoAoCifsxStats 18 }
cwoAoCifsxStatsEvictedAge OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the amount of time spent in the CIFS AO
cache by the resource that was last evicted. If this amount is
too short or too long, it is recommended to modify the size of
the cache."
::= { cwoAoCifsxStats 19 }
cwoAoCifsxStatsEvictedLastAccess OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the value of sysUpTime when the resource,
which was last evicted from the CIFS AO cache has been last
accessed."
::= { cwoAoCifsxStats 20 }
cwoAoCifsxStatsFFTotalReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains total number of FindFirst (FF) requests
since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 21 }
cwoAoCifsxStatsFFRemoteReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "requests"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains total number of FindFirst (FF) requests
sent to the remote file-server since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 22 }
cwoAoCifsxStatsFFLocalRespTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the average local response time for
FindFirst (FF) requests replied locally since CIFS AO was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 23 }
cwoAoCifsxStatsFFRemoteRespTime OBJECT-TYPE
SYNTAX CiscoMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the average remote response time for
FindFirst (FF) requests replied remotely since CIFS AO was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO."
::= { cwoAoCifsxStats 24 }
cwoAoCifsxStatsDirResources OBJECT-TYPE
SYNTAX Gauge32
UNITS "files"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the total number of currently allocated
Directory Resources in CIFS AO."
::= { cwoAoCifsxStats 25 }
-- Application statistics Table
cwoAppStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwoAppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the statistics for applications configured on
the wan optimization system."
::= { cwoApp 1 }
cwoAppStatsEntry OBJECT-TYPE
SYNTAX CwoAppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing statistics for applications configured on
the WAN optimization system. The WAN opimitization system
creates an entry when a user configures an application for
optimization. The WAN optimization system deletes an entry, when
user removes the application from the configuration."
INDEX { cwoAppStatsAppName }
::= { cwoAppStatsTable 1 }
CwoAppStatsEntry ::= SEQUENCE {
cwoAppStatsAppName SnmpAdminString,
cwoAppStatsOriginalBytes Counter64,
cwoAppStatsOptimizedBytes Counter64,
cwoAppStatsPTBytes Counter64
}
cwoAppStatsAppName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of a particular application,
which is configured for optimization."
::= { cwoAppStatsEntry 1 }
cwoAppStatsOriginalBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total original traffic (uncompressed) in
bytes of a particular application that has entered into the
system."
::= { cwoAppStatsEntry 2 }
cwoAppStatsOptimizedBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total optimized traffic in bytes of a
particular application."
::= { cwoAppStatsEntry 3 }
cwoAppStatsPTBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total pass-through traffic in bytes of a
particular application."
::= { cwoAppStatsEntry 4 }
-- Policy map statistics table
cwoPmapStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwoPmapStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the staistics for active policy maps."
::= { cwoPmap 1 }
cwoPmapStatsEntry OBJECT-TYPE
SYNTAX CwoPmapStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing statistics related with an active policy
map of a given type. The WAN optimization system creates/deletes
an entry for a policy map when it is made active/inactive
through configuration changes."
INDEX {
cwoPmapStatsType,
cwoPmapStatsName
}
::= { cwoPmapStatsTable 1 }
CwoPmapStatsEntry ::= SEQUENCE {
cwoPmapStatsType CwoTypes,
cwoPmapStatsName SnmpAdminString,
cwoPmapStatsDescr SnmpAdminString,
cwoPmapStatsTotalConns Counter64,
cwoPmapStatsTotalBytes Counter64,
cwoPmapStatsTotalPTConns Counter64,
cwoPmapStatsTotalPTBytes Counter64
}
cwoPmapStatsType OBJECT-TYPE
SYNTAX CwoTypes
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates type of the policy map."
::= { cwoPmapStatsEntry 1 }
cwoPmapStatsName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates name of the policy map."
::= { cwoPmapStatsEntry 2 }
cwoPmapStatsDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the descriptive information of the policy
map configured on the WAN optimization system. If the
description is not configured for a given policy map then this
string will contain a NULL string."
::= { cwoPmapStatsEntry 3 }
cwoPmapStatsTotalConns OBJECT-TYPE
SYNTAX Counter64
UNITS "connections"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of connections processed by
the policy map since it is active."
::= { cwoPmapStatsEntry 4 }
cwoPmapStatsTotalBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total bytes processed by the policy map
since it is active."
::= { cwoPmapStatsEntry 5 }
cwoPmapStatsTotalPTConns OBJECT-TYPE
SYNTAX Counter64
UNITS "connections"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total connections, which are made
as pass-through due to some reason by the policy map since it
is
active."
::= { cwoPmapStatsEntry 6 }
cwoPmapStatsTotalPTBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "kilo-bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total bytes which are made pass-through
by the policy map since it is active."
::= { cwoPmapStatsEntry 7 }
-- Class map statistics table.
cwoCmapStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwoCmapStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the staistics for class maps associated with
the active policy map."
::= { cwoCmap 1 }
cwoCmapStatsEntry OBJECT-TYPE
SYNTAX CwoCmapStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describes statistics for the class maps associated
with active policy maps. A new entry will be created for the
class map when a new class map gets associated to the policy map
through the configuration changes. An entry will be deleted,
when the class map is disassociated from the active policy map
through the configuration changes."
INDEX {
cwoCmapStatsType,
cwoCmapStatsName
}
::= { cwoCmapStatsTable 1 }
CwoCmapStatsEntry ::= SEQUENCE {
cwoCmapStatsType CwoTypes,
cwoCmapStatsName SnmpAdminString,
cwoCmapStatsDescr SnmpAdminString,
cwoCmapStatsTotalConns Counter64,
cwoCmapStatsTotalBytes Counter64,
cwoCmapStatsTotalPTConns Counter64,
cwoCmapStatsTotalPTBytes Counter64
}
cwoCmapStatsType OBJECT-TYPE
SYNTAX CwoTypes
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the class map."
::= { cwoCmapStatsEntry 1 }
cwoCmapStatsName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the class map."
::= { cwoCmapStatsEntry 2 }
cwoCmapStatsDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the descriptive information of the class
map configured on the WAN optimization system. If the
description is not configured for a given class map then this
string will contain a NULL string."
::= { cwoCmapStatsEntry 3 }
cwoCmapStatsTotalConns OBJECT-TYPE
SYNTAX Counter64
UNITS "connections"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of connections processed
by the class map."
::= { cwoCmapStatsEntry 4 }
cwoCmapStatsTotalBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total bytes processed by the
class map."
::= { cwoCmapStatsEntry 5 }
cwoCmapStatsTotalPTConns OBJECT-TYPE
SYNTAX Counter64
UNITS "connections"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total connections, which are made
as pass-through due to some reason by the class map."
::= { cwoCmapStatsEntry 6 }
cwoCmapStatsTotalPTBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total bytes which are made
pass-through by the class map."
::= { cwoCmapStatsEntry 7 }
-- Notifications
cwoTfoConnectionOverload NOTIFICATION-TYPE
OBJECTS { cwoTfoStatsMaxActiveConn }
STATUS current
DESCRIPTION
"This notification indicates that the device has reached its
limit of number of connections it can optimize. No new
connections will be picked-up for optimization, while the device
is in this state."
::= { ciscoWanOptimizationMIBNotifs 1 }
cwoPeerOverload NOTIFICATION-TYPE
OBJECTS { cwoGeneralMaxActivePeers }
STATUS current
DESCRIPTION
"This notification indicates the device has reached its limit of
number of peer devices with which it can optimize connections.
While the device is in this state, connections from new peer
device will not be picked-up for optimization."
::= { ciscoWanOptimizationMIBNotifs 2 }
cwoCpuThrottlingOn NOTIFICATION-TYPE
OBJECTS {
cwoGeneralCpuThrottleHigh,
cwoGeneralCpuThrottlPeriod,
cpmCPUTotalMonIntervalValue
}
STATUS current
DESCRIPTION
"This notification indicates that the device has detected that
the current CPU utilization (stored in
cpmCPUTotalMonIntervalValue) is higher than the
cwoGeneralCpuThrottleHigh. As a result the device has entered
into a throttling mode due to which connections under
optimization may experience slowdown. This notification is
generated the moment it occurs after a time lapse of 30 minutes
since the previous notification."
::= { ciscoWanOptimizationMIBNotifs 3 }
cwoCpuThrottlingOff NOTIFICATION-TYPE
OBJECTS {
cwoGeneralCpuThrottleLow,
cwoGeneralCpuThrottlPeriod,
cpmCPUTotalMonIntervalValue
}
STATUS current
DESCRIPTION
"This notification indicates that device has detected that the
CPU utilization of device (stored in
cpmCPUTotalMonIntervalValue) has fallen below the
cwoGeneralCpuThrottleLow from cwoGeneralCpuThrottleHigh. As a
result the device has come out of the throttling mode and there
should not be any negative impact of CPU usage on connection
under optimization. This notification is generated the moment it
occurs after a time lapse of 30 minutes since the previous
notification."
::= { ciscoWanOptimizationMIBNotifs 4 }
cwoLicenseExpired NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification is generated when the license on the system
expires after the period for which it was installed."
::= { ciscoWanOptimizationMIBNotifs 5 }
cwoLicenseRevoked NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification is generated when a requested revoke ticket
is obtained. This ticket could have been requested in order to
move the license to a different system."
::= { ciscoWanOptimizationMIBNotifs 6 }
cwoLicenseDeleted NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification is generated when the license on the system
is cleared."
::= { ciscoWanOptimizationMIBNotifs 7 }
-- compliance statements
ciscoWanOptimizationMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This is a default module-compliance containing default object
groups."
MODULE -- this module
MANDATORY-GROUPS {
cwoTfoBaseGroup,
cwoOverloadNotificationGroup
}
GROUP cwoGeneralGroup
DESCRIPTION
"This group is optional and indicates general statistics for WAN
optimization system/sub-system."
GROUP cwoTfoExtGroup
DESCRIPTION
"This group is optional and includes more specific stats for TFO."
GROUP cwoAoStatsGroup
DESCRIPTION
"This group includes common statistics for AO. It is optional for
systems which does not support any AO."
GROUP cwoCpuNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoAoSmbExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems who does not
support SMB AO."
::= { ciscoWanOptimizationMIBCompliances 1 }
ciscoWanOptimizationMIBCompliance1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This is a default module-compliance containing default object
groups."
MODULE -- this module
MANDATORY-GROUPS {
cwoTfoBaseGroup,
cwoOverloadNotificationGroup
}
GROUP cwoGeneralGroup
DESCRIPTION
"This group is optional and indicates general statistics for WAN
optimization system/sub-system."
GROUP cwoTfoExtGroup
DESCRIPTION
"This group is optional and includes more specific stats for TFO."
GROUP cwoAoStatsGroup
DESCRIPTION
"This group includes common statistics for AO. It is optional for
systems which does not support any AO."
GROUP cwoCpuNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoAoSmbExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems who does
not
support SMB AO."
GROUP cwoLicenseNotificationGroup
DESCRIPTION
"This group is optional for systems that have wan optimization."
::= { ciscoWanOptimizationMIBCompliances 2 }
ciscoWanOptimizationMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This is a default module-compliance containing default object
groups. This compliance module deprecates
ciscoWanOptimizationMIBCompliance1."
MODULE -- this module
MANDATORY-GROUPS { cwoTfoBaseGroup }
GROUP cwoGeneralGroup
DESCRIPTION
"This group is optional and indicates general statistics for WAN
optimization system/sub-system."
GROUP cwoCpuNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoOverloadNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoLicenseNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoAoHttpExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support HTTP AO."
GROUP cwoAoMapiExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support MAPI AO."
GROUP cwoAoNfsExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support NFS AO."
GROUP cwoAoVideoExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support Video AO."
GROUP cwoAoCifsExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support CIFS AO."
GROUP cwoAoApplicationStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not associates applications with AOs."
GROUP cwoAoPolicyMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement policy map for processing traffic."
GROUP cwoAoClassMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement class-maps for processing traffic."
GROUP cwoAoStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoTfoExtGroupRev1
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoTfoExtGroup
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoAoStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoSmbExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization system, which does
not support SMB AO."
::= { ciscoWanOptimizationMIBCompliances 3 }
ciscoWanOptimizationMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This is a default module-compliance containing default object
groups. This compliance module deprecates
ciscoWanOptimizationMIBComplianceRev2."
MODULE -- this module
MANDATORY-GROUPS { cwoTfoBaseGroup }
GROUP cwoGeneralGroup
DESCRIPTION
"This group is optional and indicates general statistics for WAN
optimization system/sub-system."
GROUP cwoCpuNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoOverloadNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoLicenseNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoAoHttpExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support HTTP AO."
GROUP cwoAoMapiExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support MAPI AO."
GROUP cwoAoNfsExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support NFS AO."
GROUP cwoAoVideoExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support Video AO."
GROUP cwoAoCifsExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support CIFS AO."
GROUP cwoAoApplicationStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not associates applications with AOs."
GROUP cwoAoPolicyMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement policy map for processing traffic."
GROUP cwoAoClassMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement class-maps for processing traffic."
GROUP cwoAoStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoTfoExtGroupRev1
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoTfoExtGroup
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoAoStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoSmbExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization system, which does
not support SMB AO."
GROUP cwoAoHttpExtendedStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support HTTP AO."
GROUP cwoAoCifsExtendedStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support CIFS AO."
::= { ciscoWanOptimizationMIBCompliances 4 }
ciscoWanOptimizationMIBComplianceRev4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This is a default module-compliance containing default object
groups. This compliance module deprecates
ciscoWanOptimizationMIBComplianceRev3."
MODULE -- this module
MANDATORY-GROUPS { cwoTfoBaseGroup }
GROUP cwoGeneralGroup
DESCRIPTION
"This group is optional and indicates general statistics for WAN
optimization system/sub-system."
GROUP cwoCpuNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoOverloadNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoLicenseNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoAoHttpExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support HTTP AO."
GROUP cwoAoMapiExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support MAPI AO."
GROUP cwoAoNfsExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support NFS AO."
GROUP cwoAoVideoExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support Video AO."
GROUP cwoAoCifsExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support CIFS AO."
GROUP cwoAoApplicationStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not associates applications with AOs."
GROUP cwoAoPolicyMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement policy map for processing traffic."
GROUP cwoAoClassMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement class-maps for processing traffic."
GROUP cwoAoStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoTfoExtGroupRev1
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoTfoExtGroup
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoAoStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoSmbExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization system, which does
not support SMB AO."
GROUP cwoAoHttpExtendedStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support HTTP AO."
GROUP cwoAoCifsExtendedStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support CIFS AO."
GROUP cwoAoSmbExtendedStatsGroupRev1
DESCRIPTION
"This group is mandatory only for WAN optimization system that
support Signed Bytes statistics for SMB AO."
::= { ciscoWanOptimizationMIBCompliances 5 }
ciscoWanOptimizationMIBComplianceRev5 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"This is a default module-compliance containing default object
groups. This compliance module deprecates
ciscoWanOptimizationMIBComplianceRev4."
MODULE -- this module
MANDATORY-GROUPS { cwoTfoBaseGroup }
GROUP cwoGeneralGroup
DESCRIPTION
"This group is optional and indicates general statistics for WAN
optimization system/sub-system."
GROUP cwoCpuNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service"
GROUP cwoOverloadNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoLicenseNotificationGroup
DESCRIPTION
"This group is optional to implement, but mandatory for systems
which run WAN optimization as a service."
GROUP cwoAoHttpExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support HTTP AO."
GROUP cwoAoMapiExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support MAPI AO."
GROUP cwoAoNfsExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support NFS AO."
GROUP cwoAoApplicationStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not associates applications with AOs."
GROUP cwoAoPolicyMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement policy map for processing traffic."
GROUP cwoAoClassMapStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not implement class-maps for processing traffic."
GROUP cwoAoStatsGroup
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoTfoExtGroupRev1
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoTfoExtGroup
DESCRIPTION
"This group is optional for system supporting TFO AO."
GROUP cwoAoStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support various AOs for traffic optimization."
GROUP cwoAoSmbExtendedStatsGroup
DESCRIPTION
"This group is optional for WAN optimization system, which does
not support SMB AO."
GROUP cwoAoHttpExtendedStatsGroupRev1
DESCRIPTION
"This group is optional for WAN optimization systems which does
not support HTTP AO."
GROUP cwoAoSmbExtendedStatsGroupRev1
DESCRIPTION
"This group is mandatory only for WAN optimization system that
support Signed Bytes statistics for SMB AO."
GROUP cwoAoHttpExtendedStatsGroupRev2
DESCRIPTION
"This group is mandatory only for WAN optimization system that
support Akamai Cache statistics for HTTP AO"
GROUP cwoDreCacheStatsGroup
DESCRIPTION
"This group is optional for system supporting DRE cache
statistics."
GROUP cwoDrePerfStatsGroup
DESCRIPTION
"This group is optional for system supporting DRE performance
statistics."
::= { ciscoWanOptimizationMIBCompliances 6 }
-- Groups
ciscoWanOptimizationMIBGroups OBJECT IDENTIFIER
::= { ciscoWanOptimizationMIBConform 2 }
cwoGeneralGroup OBJECT-GROUP
OBJECTS {
cwoGeneralActivePeers,
cwoGeneralMaxActivePeers,
cwoGeneralCpuThrottleHigh,
cwoGeneralCpuThrottleLow,
cwoGeneralCpuThrottlPeriod
}
STATUS current
DESCRIPTION
"This collection of objects represent the general statistics of
WAN optimization system/sub-system."
::= { ciscoWanOptimizationMIBGroups 1 }
cwoTfoBaseGroup OBJECT-GROUP
OBJECTS {
cwoTfoStatsTotalOptConn,
cwoTfoStatsActiveOptConn,
cwoTfoStatsMaxActiveConn,
cwoTfoStatsTotalNormalClosedConn,
cwoTfoStatsResetConn
}
STATUS current
DESCRIPTION
"This collection of objects represent the common statistics for
TFO."
::= { ciscoWanOptimizationMIBGroups 2 }
cwoTfoExtGroup OBJECT-GROUP
OBJECTS {
cwoTfoStatsActiveOptTCPPlusConn,
cwoTfoStatsActiveOptTCPOnlyConn,
cwoTfoStatsActiveOptTCPPrepConn,
cwoTfoStatsActiveADConn,
cwoTfoStatsReservedConn,
cwoTfoStatsPendingConn,
cwoTfoStatsActivePTConn
}
STATUS current
DESCRIPTION
"This collection of objects represent the statistics for
TFO, which are optional."
::= { ciscoWanOptimizationMIBGroups 3 }
cwoAoStatsGroup OBJECT-GROUP
OBJECTS {
cwoAoStatsIsConfigured,
cwoAoStatsIsLicensed,
cwoAoStatsOperationalState,
cwoAoStatsStartUpTime,
cwoAoStatsTotalHandledConns,
cwoAoStatsTotalOptConns,
cwoAoStatsTotalHandedOffConns,
cwoAoStatsTotalDroppedConns,
cwoAoStatsActiveOptConns,
cwoAoStatsPendingConns,
cwoAoStatsMaxActiveOptConns,
cwoAoStatsLastResetTime
}
STATUS current
DESCRIPTION
"This group includes statistics for AO. Which are common for all
AOs."
::= { ciscoWanOptimizationMIBGroups 4 }
cwoOverloadNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cwoTfoConnectionOverload,
cwoPeerOverload
}
STATUS current
DESCRIPTION
"This group contains notifications event for various overload
condition on wan optimization system."
::= { ciscoWanOptimizationMIBGroups 5 }
cwoCpuNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cwoCpuThrottlingOn,
cwoCpuThrottlingOff
}
STATUS current
DESCRIPTION
"This group contains notifications event for wan optimization
system, which are specific to some WAN optimization systems."
::= { ciscoWanOptimizationMIBGroups 6 }
cwoAoSmbExtendedStatsGroup OBJECT-GROUP
OBJECTS {
cwoAoSmbxStatsBytesReadCache,
cwoAoSmbxStatsBytesWriteCache,
cwoAoSmbxStatsBytesReadServer,
cwoAoSmbxStatsBytesWriteServer,
cwoAoSmbxStatsBytesReadClient,
cwoAoSmbxStatsBytesWriteClient,
cwoAoSmbxStatsProcessedReqs,
cwoAoSmbxStatsActiveReqs,
cwoAoSmbxStatsTotalTimedOutReqs,
cwoAoSmbxStatsTotalRemoteReqs,
cwoAoSmbxStatsTotalLocalReqs,
cwoAoSmbxStatsRemoteAvgTime,
cwoAoSmbxStatsLocalAvgTime,
cwoAoSmbxStatsRACacheHitCount,
cwoAoSmbxStatsMDCacheHitCount,
cwoAoSmbxStatsRACacheHitRate,
cwoAoSmbxStatsMDCacheHitRate,
cwoAoSmbxStatsMaxRACacheSize,
cwoAoSmbxStatsMaxMDCacheSize,
cwoAoSmbxStatsMDCacheSize,
cwoAoSmbxStatsRAEvictedAge,
cwoAoSmbxStatsRTT,
cwoAoSmbxStatsTotalRespTimeSaving,
cwoAoSmbxStatsOpenFiles,
cwoAoSmbxStatsTotalFilesInRACache
}
STATUS current
DESCRIPTION
"This Group contains statistics which are specific to SMB AO."
::= { ciscoWanOptimizationMIBGroups 7 }
cwoLicenseNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cwoLicenseExpired,
cwoLicenseRevoked,
cwoLicenseDeleted
}
STATUS current
DESCRIPTION
"This group contains notifications event for actions on
licensing on wan optimization systems."
::= { ciscoWanOptimizationMIBGroups 8 }
cwoAoHttpExtendedStatsGroup OBJECT-GROUP
OBJECTS {
cwoAoHttpxStatsTotalSavedTime,
cwoAoHttpxStatsTotalRTT,
cwoAoHttpxStatsTotalMDCMTime,
cwoAoHttpxStatsEstSavedTime
}
STATUS current
DESCRIPTION
"This group contains statistics which are specific to HTTP AO."
::= { ciscoWanOptimizationMIBGroups 9 }
cwoAoMapiExtendedStatsGroup OBJECT-GROUP
OBJECTS {
cwoAoMapixStatsUnEncrALRT,
cwoAoMapixStatsUnEncrARRT,
cwoAoMapixStatsTotalUnEncrLRs,
cwoAoMapixStatsTotalUnEncrRRs,
cwoAoMapixStatsUnEncrAvgRedTime,
cwoAoMapixStatsEncrALRT,
cwoAoMapixStatsEncrARRT,
cwoAoMapixStatsTotalEncrLRs,
cwoAoMapixStatsTotalEncrRRs,
cwoAoMapixStatsEncrAvgRedTime
}
STATUS current
DESCRIPTION
"This group contains statistics which are specific to MAPI AO."
::= { ciscoWanOptimizationMIBGroups 10 }
cwoAoNfsExtendedStatsGroup OBJECT-GROUP
OBJECTS {
cwoAoNfsxStatsALRT,
cwoAoNfsxStatsARRT,
cwoAoNfsxStatsTotalLRs,
cwoAoNfsxStatsTotalRRs,
cwoAoNfsxStatsEstTimeSaved
}
STATUS current
DESCRIPTION
"This group contains statistics which are specific to NFS AO."
::= { ciscoWanOptimizationMIBGroups 11 }
cwoAoVideoExtendedStatsGroup OBJECT-GROUP
OBJECTS {
cwoAoVideoxStatsTotalInBytes,
cwoAoVideoxStatsTotalOutBytes
}
STATUS deprecated
DESCRIPTION
"This group contains statistics which are specific to Video AO.
This group is deprecated as all the objects in cwoAoVideoxStats
table are deprecated."
::= { ciscoWanOptimizationMIBGroups 12 }
cwoAoCifsExtendedStatsGroup OBJECT-GROUP
OBJECTS {
cwoAoCifsxStatsTotalReadBytes,
cwoAoCifsxStatsTotalWrittenBytes,
cwoAoCifsxStatsTotalRemoteReqs,
cwoAoCifsxStatsTotalLocalReqs,
cwoAoCifsxStatsTotalRemoteTime,
cwoAoCifsxStatsTotalLocalTime,
cwoAoCifsxStatsConnectedSessions,
cwoAoCifsxStatsOpenFiles,
cwoAoCifsxStatsMaxCacheSize,
cwoAoCifsxStatsCurrentCacheSize,
cwoAoCifsxStatsMaxCacheResources,
cwoAoCifsxStatsCacheResources,
cwoAoCifsxStatsEvictedResources,
cwoAoCifsxStatsLastEvictedTime,
cwoAoCifsxStatsVolHiWatermark,
cwoAoCifsxStatsVolLoWatermark,
cwoAoCifsxStatsAmntHiWatermark,
cwoAoCifsxStatsAmntLoWatermark,
cwoAoCifsxStatsEvictedAge,
cwoAoCifsxStatsEvictedLastAccess
}
STATUS deprecated
DESCRIPTION
"This group contains statistics which are specific to CIFS AO.
This group is deprecated as all the objects in cwoAoCifsxStats
table are deprecated."
::= { ciscoWanOptimizationMIBGroups 13 }
cwoAoApplicationStatsGroup OBJECT-GROUP
OBJECTS {
cwoAppStatsOriginalBytes,
cwoAppStatsOptimizedBytes,
cwoAppStatsPTBytes
}
STATUS current
DESCRIPTION
"This group contains statistics for applications associated with
AO."
::= { ciscoWanOptimizationMIBGroups 14 }
cwoAoPolicyMapStatsGroup OBJECT-GROUP
OBJECTS {
cwoPmapStatsDescr,
cwoPmapStatsTotalConns,
cwoPmapStatsTotalBytes,
cwoPmapStatsTotalPTConns,
cwoPmapStatsTotalPTBytes
}
STATUS current
DESCRIPTION
"This group contains statistics for active policy map."
::= { ciscoWanOptimizationMIBGroups 15 }
cwoAoClassMapStatsGroup OBJECT-GROUP
OBJECTS {
cwoCmapStatsDescr,
cwoCmapStatsTotalConns,
cwoCmapStatsTotalBytes,
cwoCmapStatsTotalPTConns,
cwoCmapStatsTotalPTBytes
}
STATUS current
DESCRIPTION
"This group contains statistics for class maps associated with
active policy map."
::= { ciscoWanOptimizationMIBGroups 16 }
cwoAoStatsGroupRev1 OBJECT-GROUP
OBJECTS {
cwoAoStatsLoadStatus,
cwoAoStatsBwOpt
}
STATUS current
DESCRIPTION
"This group includes statistics, which are common for all AOs."
::= { ciscoWanOptimizationMIBGroups 17 }
cwoAoTfoExtGroupRev1 OBJECT-GROUP
OBJECTS { cwoTfoStatsLoadStatus }
STATUS current
DESCRIPTION
"This collection of objects represent the statistics for TFO,
which are optional."
::= { ciscoWanOptimizationMIBGroups 18 }
cwoAoHttpExtendedStatsGroupRev1 OBJECT-GROUP
OBJECTS {
cwoAoHttpxStatsTotalSPSessions,
cwoAoHttpxStatsTotalSPPFSessions,
cwoAoHttpxStatsTotalSPPFObjects,
cwoAoHttpxStatsTotalSPRTTSaved,
cwoAoHttpxStatsTotalSPPFMissTime
}
STATUS current
DESCRIPTION
"This group contains statistics specific to cwoAoHttpxStats
group enhancement and SharePoint AO."
::= { ciscoWanOptimizationMIBGroups 19 }
cwoAoCifsExtendedStatsGroupRev1 OBJECT-GROUP
OBJECTS {
cwoAoCifsxStatsFFTotalReqs,
cwoAoCifsxStatsFFRemoteReqs,
cwoAoCifsxStatsFFLocalRespTime,
cwoAoCifsxStatsFFRemoteRespTime,
cwoAoCifsxStatsDirResources
}
STATUS deprecated
DESCRIPTION
"This group contains statistics specific to CIFS Atkins
feature. This group is deprecated as all the objects in
cwoAoCifsxStats table are deprecated."
::= { ciscoWanOptimizationMIBGroups 20 }
cwoAoSmbExtendedStatsGroupRev1 OBJECT-GROUP
OBJECTS {
cwoAoSmbxStatsRdL4SignWANBytes,
cwoAoSmbxStatsWrL4SignWANBytes,
cwoAoSmbxStatsRdSignLANBytes,
cwoAoSmbxStatsWrSignLANBytes
}
STATUS current
DESCRIPTION
"This group contains statistics specific to Signed Bytes
Statistics feature for SMB AO."
::= { ciscoWanOptimizationMIBGroups 21 }
cwoAoHttpExtendedStatsGroupRev2 OBJECT-GROUP
OBJECTS {
cwoAoHttpxStatsAKCBypassCacheTrans,
cwoAoHttpxStatsAKCBypassRespBytes,
cwoAoHttpxStatsAKCBypassCacheTransPercent,
cwoAoHttpxStatsAKCBypassRespBytesPercent,
cwoAoHttpxStatsAKCBypassCacheRespTimeSaved,
cwoAoHttpxStatsAKCBypassAvgCacheRespTimeSaved,
cwoAoHttpxStatsAKCBypassRespTimeSavedPercent,
cwoAoHttpxStatsAKCStdCacheTrans,
cwoAoHttpxStatsAKCStdRespBytes,
cwoAoHttpxStatsAKCStdCacheTransPercent,
cwoAoHttpxStatsAKCStdRespBytesPercent,
cwoAoHttpxStatsAKCStdCacheRespTimeSaved,
cwoAoHttpxStatsAKCStdAvgCacheRespTimeSaved,
cwoAoHttpxStatsAKCStdRespTimeSavedPercent,
cwoAoHttpxStatsAKCBasicCacheTrans,
cwoAoHttpxStatsAKCBasicRespBytes,
cwoAoHttpxStatsAKCBasicCacheTransPercent,
cwoAoHttpxStatsAKCBasicRespBytesPercent,
cwoAoHttpxStatsAKCBasicCacheRespTimeSaved,
cwoAoHttpxStatsAKCBasicAvgCacheRespTimeSaved,
cwoAoHttpxStatsAKCBasicRespTimeSavedPercent,
cwoAoHttpxStatsAKCAdvCacheTrans,
cwoAoHttpxStatsAKCAdvRespBytes,
cwoAoHttpxStatsAKCAdvCacheTransPercent,
cwoAoHttpxStatsAKCAdvRespBytesPercent,
cwoAoHttpxStatsAKCAdvCacheRespTimeSaved,
cwoAoHttpxStatsAKCAdvAvgCacheRespTimeSaved,
cwoAoHttpxStatsAKCAdvRespTimeSavedPercent,
cwoAoHttpxStatsAKCTotalCacheTrans,
cwoAoHttpxStatsAKCTotalRespBytes,
cwoAoHttpxStatsAKCTotalCacheTransPercent,
cwoAoHttpxStatsAKCTotalRespBytesPercent,
cwoAoHttpxStatsAKCTotalCacheRespTimeSaved,
cwoAoHttpxStatsAKCTotalAvgCacheRespTimeSaved,
cwoAoHttpxStatsAKCTotalRespTimeSavedPercent,
cwoAoHttpxStatsAKCPrepStatus,
cwoAoHttpxStatsAKCPrepCacheStoreBytes,
cwoAoHttpxStatsAKCPrepUncacheStoreBytes
}
STATUS current
DESCRIPTION
"This group contains statistics specific to cwoAoHttpxStats
group enhancement and HTTP Akamai Cache."
::= { ciscoWanOptimizationMIBGroups 22 }
cwoDreCacheStatsGroup OBJECT-GROUP
OBJECTS {
cwoDreCacheStatsStatus,
cwoDreCacheStatsAge,
cwoDreCacheStatsTotal,
cwoDreCacheStatsUsed,
cwoDreCacheStatsDataUnitUsage,
cwoDreCacheStatsReplacedOneHrDataUnit,
cwoDreCacheStatsDataUnitAge,
cwoDreCacheStatsSigblockUsage,
cwoDreCacheStatsReplacedOneHrSigblock,
cwoDreCacheStatsSigblockAge
}
STATUS current
DESCRIPTION
"This group contains statistics specific to DRE cache
statistics."
::= { ciscoWanOptimizationMIBGroups 23 }
cwoDrePerfStatsGroup OBJECT-GROUP
OBJECTS {
cwoDrePerfStatsEncodeCompressionRatio,
cwoDrePerfStatsEncodeCompressionLatency,
cwoDrePerfStatsEncodeAvgMsgSize,
cwoDrePerfStatsDecodeCompressionRatio,
cwoDrePerfStatsDecodeCompressionLatency,
cwoDrePerfStatsDecodeAvgMsgSize
}
STATUS current
DESCRIPTION
"This group contains statistics specific to DRE performance
statistics."
::= { ciscoWanOptimizationMIBGroups 24 }
END
Reference in New Issue Copy Permalink