mibs/MIBS/cisco/CISCOSB-EEE-MIB

321 lines
9.7 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CISCOSB-EEE-MIB DEFINITIONS ::= BEGIN
-- Title: CISCOSB EEE MIB
-- Version: 7.50
-- Date: 05 May 2010
--
IMPORTS
switch001 FROM CISCOSB-MIB
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC
ifIndex, ifOperStatus FROM IF-MIB;
rlEee MODULE-IDENTITY -- 5-May-2010
LAST-UPDATED "202105170000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION "The private MIB module definition for Energy Efficient Ethernet feature."
REVISION "201005150000Z"
DESCRIPTION "Add Energy Efficient Ethernet support per port and per system"
::= { switch001 149}
----------------------
-- rlEeeEnable
----------------------
rlEeeEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the EEE mode globally"
DEFVAL { false }
::= { rlEee 1 }
----------------------
-- rlEeePortTable
----------------------
rlEeePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlEeePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of EEE state of ports"
::= { rlEee 2 }
rlEeePortEntry OBJECT-TYPE
SYNTAX RlEeePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of EEE state of bridge port"
INDEX { ifIndex }
::= { rlEeePortTable 1 }
RlEeePortEntry ::= SEQUENCE {
rlEeePortAdminStatus TruthValue,
rlEeePortSupported BITS,
rlEeePortRemoteStatus TruthValue,
rlEeePortOperStatus TruthValue
}
rlEeePortAdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable EEE on ifindex"
DEFVAL { false }
::= { rlEeePortEntry 1 }
rlEeePortSupported OBJECT-TYPE
SYNTAX BITS {
rlEeePortSupported10M(0),
rlEeePortSupported100M(1),
rlEeePortSupported1G(2),
rlEeePortSupported10G(3),
rlEeePortSupported2500M(4),
rlEeePortSupported5G(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit map that indicates whether EEE supported on the phy of the ifindex per speed
0 - speed 10m; 1 - 100m; 2 - 1g; 3 - 10g; 4 - 2.5g; 5 - 5g"
::= { rlEeePortEntry 2 }
rlEeePortRemoteStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether EEE active on remote link on current port's speed"
::= { rlEeePortEntry 3 }
rlEeePortOperStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether EEE active on ifindex - ifoper is up,
rlEeePortSupported BIT is on in current port speed
rlEeePortLldpRemoteStatus is true,
rlEeeEnable is true,
rlEeePortAdminStatus is true"
::= { rlEeePortEntry 4 }
----------------------
-- rlEeePortLldpTable
----------------------
rlEeePortLldpTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlEeePortLldpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of EEE LLDP"
::= { rlEee 3 }
rlEeePortLldpEntry OBJECT-TYPE
SYNTAX RlEeePortLldpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of EEE LLDP"
INDEX { ifIndex }
::= { rlEeePortLldpTable 1 }
RlEeePortLldpEntry ::= SEQUENCE {
rlEeePortLldpAdminStatus TruthValue,
rlEeePortLldpOperStatus TruthValue
}
rlEeePortLldpAdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable EEE LLDP on ifindex"
DEFVAL { false }
::= { rlEeePortLldpEntry 1 }
rlEeePortLldpOperStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether EEE LLDP active on ifindex - rlEeePortLldpAdminStatus is true
lldpPortConfigAdminStatus is txAndRx,
rlLldpEnabled is true,
recieve a synch lldp packet"
::= { rlEeePortLldpEntry 2 }
----------------------
-- rlEeePortLldpLocalTable
----------------------
rlEeePortLldpLocalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlEeePortLocalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of EEE Local ports"
::= { rlEee 4 }
rlEeePortLldpLocalEntry OBJECT-TYPE
SYNTAX RlEeePortLocalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of EEE Local port"
INDEX { ifIndex }
::= { rlEeePortLldpLocalTable 1 }
RlEeePortLocalEntry ::= SEQUENCE {
rlEeePortLldpLocalResolvedTx Unsigned32,
rlEeePortLldpLocalTx Unsigned32,
rlEeePortLldpLocalTxEcho Unsigned32,
rlEeePortLldpLocalResolvedRx Unsigned32,
rlEeePortLldpLocalRx Unsigned32,
rlEeePortLldpLocalRxEcho Unsigned32
}
rlEeePortLldpLocalResolvedTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current Tw_sys_tx configured in the local system, in micro-seconds"
::= { rlEeePortLldpLocalEntry 1 }
rlEeePortLldpLocalTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of Tw_sys_tx that the local system can support, in micro-seconds"
::= { rlEeePortLldpLocalEntry 2 }
rlEeePortLldpLocalTxEcho OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remote system's Transmit Tw_sys_tx that was used by the local system
to compute the Tw_sys_tx that it wants to request from the remote system, in micro-seconds"
::= { rlEeePortLldpLocalEntry 3 }
rlEeePortLldpLocalResolvedRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current Tw_sys_tx configured by the remote system, in micro-seconds"
::= { rlEeePortLldpLocalEntry 4 }
rlEeePortLldpLocalRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of Tw_sys_tx that the local system requests from the remote system,
in micro-seconds"
::= { rlEeePortLldpLocalEntry 5 }
rlEeePortLldpLocalRxEcho OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remote system Receive Tw_sys_tx that was used by the local system
to compute the Tw_sys_tx that it can support, in micro-seconds"
::= { rlEeePortLldpLocalEntry 6 }
----------------------
-- rlEeePortLldpRemoteTable
----------------------
rlEeePortLldpRemoteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlEeePortRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of EEE remote ports"
::= { rlEee 5 }
rlEeePortLldpRemoteEntry OBJECT-TYPE
SYNTAX RlEeePortRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of EEE remote port"
INDEX { ifIndex }
::= { rlEeePortLldpRemoteTable 1 }
RlEeePortRemoteEntry ::= SEQUENCE {
rlEeePortLldpRemoteTx Unsigned32,
rlEeePortLldpRemoteRx Unsigned32,
rlEeePortLldpRemoteTxEcho Unsigned32,
rlEeePortLldpRemoteRxEcho Unsigned32
}
rlEeePortLldpRemoteTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of Tw_sys_tx that the remote system can support, in micro-seconds"
::= { rlEeePortLldpRemoteEntry 1 }
rlEeePortLldpRemoteRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of Tw_sys_tx that the remote system requests from the local system,
in micro-seconds"
::= { rlEeePortLldpRemoteEntry 2 }
rlEeePortLldpRemoteTxEcho OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of transmit Tw_sys_tx echoed back by the remote system, in micro-seconds"
::= { rlEeePortLldpRemoteEntry 3 }
rlEeePortLldpRemoteRxEcho OBJECT-TYPE
SYNTAX Unsigned32
UNITS "uSec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value Receive Tw_sys_tx echoed back by the remote system, in micro-seconds"
::= { rlEeePortLldpRemoteEntry 4 }
END