mibs/MIBS/cisco/CISCOSB-IP-SLA

341 lines
9.3 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CISCOSB-IP-SLA DEFINITIONS ::= BEGIN
-- Title: CISCOSB
-- SLA MIB
-- Date: 24-Mar-2016
IMPORTS
switch001 FROM CISCOSB-MIB
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32,IpAddress FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION, MacAddress,
DisplayString, TruthValue FROM SNMPv2-TC
InetAddressType,InetAddress FROM INET-ADDRESS-MIB; -- RFC2851;
rlSLA MODULE-IDENTITY
LAST-UPDATED "201101050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"This private MIB module is used for definition of Service Level Agreements"
REVISION "201602280000Z"
DESCRIPTION
"Added this MODULE-IDENTITY clause."
::= { switch001 231 }
-- =======================================================
-- IP SLA operation Table
-- =======================================================
rlSLAOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RLSLAOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configured ip SLA operations"
::= { rlSLA 1}
rlSLAOperEntry OBJECT-TYPE
SYNTAX RLSLAOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table."
INDEX { rlSLAOperId }
::= { rlSLAOperTable 1 }
RLSLAOperEntry::= SEQUENCE {
rlSLAOperId Unsigned32,
rlSLAOperType INTEGER,
rlSLAOperState INTEGER,
rlSLAOperTimeout Unsigned32,
rlSLAOperFrequency Unsigned32,
rlSLAOperReqDataSize Unsigned32,
rlSLAOperReturnCode INTEGER,
rlSLAOperDestAddrType InetAddressType,
rlSLAOperDestAddr InetAddress,
rlSLAOperSrcAddr IpAddress,
rlSLAOperSuccessCounter Unsigned32,
rlSLAOperFailureCounter Unsigned32,
rlSLAICMPEchoRequestCounter Unsigned32,
rlSLAICMPEchoReplyCounter Unsigned32,
rlSLAICMPErrorCounter Unsigned32,
rlSLARowStatus RowStatus,
rlSLAOperNextHopAddr IpAddress,
rlSLAICMPEchoHostUnreachCounter Unsigned32,
rlSLAICMPEchoNonHostUnreachCounter Unsigned32
}
rlSLAOperId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP SLA operation index"
::= { rlSLAOperEntry 1 }
rlSLAOperType OBJECT-TYPE
SYNTAX INTEGER {icmp-echo(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP SLA operation type."
::= { rlSLAOperEntry 2 }
rlSLAOperState OBJECT-TYPE
SYNTAX INTEGER {pending(0), scheduled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP SLA operation state."
DEFVAL {0}
::= { rlSLAOperEntry 3 }
rlSLAOperTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in milliseconds an IP SLA operation waits for
a response."
::= { rlSLAOperEntry 4 }
rlSLAOperFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate (in seconds) at which a specified operation repeats."
::= { rlSLAOperEntry 5 }
rlSLAOperReqDataSize OBJECT-TYPE
SYNTAX Unsigned32 (28..1472)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The payload size of the request packet of the IP SLA operation."
DEFVAL {28}
::= { rlSLAOperEntry 6 }
rlSLAOperReturnCode OBJECT-TYPE
SYNTAX INTEGER {success(0), error(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP SLA operation return code."
DEFVAL {0}
::= { rlSLAOperEntry 7 }
rlSLAOperDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inet type of destination address"
::= { rlSLAOperEntry 8 }
rlSLAOperDestAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination address of operation (i.e. icmp-echo)"
::= { rlSLAOperEntry 9 }
rlSLAOperSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip address of operation"
DEFVAL { '00000000'H }
::= { rlSLAOperEntry 10 }
rlSLAOperSuccessCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP SLA operation success counter."
::= { rlSLAOperEntry 11 }
rlSLAOperFailureCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP SLA operation failure counter."
::= { rlSLAOperEntry 12 }
rlSLAICMPEchoRequestCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP SLA operation ICMP-echo request counter."
::= { rlSLAOperEntry 13 }
rlSLAICMPEchoReplyCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP SLA operation ICMP-echo reply counter."
::= { rlSLAOperEntry 14 }
rlSLAICMPErrorCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP SLA operation ICMP-echo error counter."
::= { rlSLAOperEntry 15 }
rlSLARowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent."
::= { rlSLAOperEntry 16}
rlSLAOperNextHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The next hop ip address"
DEFVAL { '00000000'H }
::= { rlSLAOperEntry 17 }
rlSLAICMPEchoHostUnreachCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ICMP-echo host unreachable counter."
::= { rlSLAOperEntry 18 }
rlSLAICMPEchoNonHostUnreachCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ICMP-echo non host unreachable error counter."
::= { rlSLAOperEntry 19 }
-- =======================================================
-- IP SLA Track Table
-- =======================================================
rlSLATrackTable OBJECT-TYPE
SYNTAX SEQUENCE OF RLSLATrackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ip SLA operations track objects"
::= { rlSLA 2}
rlSLATrackEntry OBJECT-TYPE
SYNTAX RLSLATrackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table."
INDEX { rlSLATrackObj }
::= { rlSLATrackTable 1 }
RLSLATrackEntry::= SEQUENCE {
rlSLATrackObj Unsigned32,
rlSLATrackOperId Unsigned32,
rlSLAUpDelay Unsigned32,
rlSLADownDelay Unsigned32,
rlSLADelayReminder Unsigned32,
rlSLATrackObjState INTEGER,
rlSLATrackRowStatus RowStatus
}
rlSLATrackObj OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP SLA track object identifier"
::= { rlSLATrackEntry 1 }
rlSLATrackOperId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP SLA operation index"
::= { rlSLATrackEntry 2 }
rlSLAUpDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delay time moving from down state to up state"
DEFVAL {0}
::= { rlSLATrackEntry 3 }
rlSLADownDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delay time moving from up state to down state"
DEFVAL {0}
::= { rlSLATrackEntry 4 }
rlSLADelayReminder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delay time moving from up state to down state"
::= { rlSLATrackEntry 5 }
rlSLATrackObjState OBJECT-TYPE
SYNTAX INTEGER {up(0), down(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The track object current state (Up or Down, default is: Up)."
DEFVAL {0}
::= { rlSLATrackEntry 6 }
rlSLATrackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent."
::= { rlSLATrackEntry 7}
rlSLAClearCounters OBJECT-TYPE
SYNTAX INTEGER(-1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear SLA counters.
Setting a value of zero clears counters of all operations.
Setting a non-zero value clears the specific operation counters."
::= { rlSLA 3 }
END