mibs/MIBS/cisco/CISCOSB-MAC-BASE-PRIO

273 lines
7.8 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CISCOSB-MAC-BASE-PRIO DEFINITIONS ::= BEGIN
-- Title: CISCOSB MAC BASE PRIO
-- Version: 7.36
-- Date: 1 Apr 2004
--
-- 30-May-2011 Added MODULE-IDENTITY
IMPORTS
OBJECT-TYPE FROM SNMPv2-SMI
switch001 FROM CISCOSB-MIB
MacAddress, RowStatus FROM SNMPv2-TC;
rlMacBasePrio MODULE-IDENTITY
LAST-UPDATED "201105300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for MAC base priorities."
REVISION "201105300000Z"
DESCRIPTION
"Initial revision."
::= { switch001 101 }
--rlMacBasePrio OBJECT IDENTIFIER ::= { switch001 101 }
rlMacBasePrioMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the snmp support version that is supported by
this device."
::= { rlMacBasePrio 1 }
rlMacBasePrioSupport OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"indicates which features of the max base prio
are supported:
(bit 0 is the most significant bit)
bit 0 - ForceL3Cos
bit 1 - SADA_TC
"
::= { rlMacBasePrio 2 }
rlMacBasePrioForceL3CosEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controlls the activation of ForceL3Cos feature in Mac base
priority"
::= { rlMacBasePrio 3 }
rlMacBasePrioForceL3CosTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMacBasePrioForceL3CosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about ranges
of addresses that are used in the mac based ptiority
with the ForceL3Cos feature."
::= { rlMacBasePrio 4 }
rlMacBasePrioForceL3CosEntry OBJECT-TYPE
SYNTAX RlMacBasePrioForceL3CosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about ranges of MAC addresses
that are used in the mac based priority with
the ForeL3Cos feature"
INDEX { rlMacBasePrioForceL3CosAddress,rlMacBasePrioForceL3CosMask }
::= { rlMacBasePrioForceL3CosTable 1 }
RlMacBasePrioForceL3CosEntry ::=
SEQUENCE {
rlMacBasePrioForceL3CosAddress
MacAddress,
rlMacBasePrioForceL3CosMask
MacAddress,
rlMacBasePrioForceL3CosRowStatus
RowStatus
}
rlMacBasePrioForceL3CosAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The range of address of this entry.
The range may not hold MAC multicast addresses. "
::= { rlMacBasePrioForceL3CosEntry 1 }
rlMacBasePrioForceL3CosMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
learned address before being compared to
the value in the rlMacBasePrioForceL3CosAddress field."
::= { rlMacBasePrioForceL3CosEntry 2 }
rlMacBasePrioForceL3CosRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlMacBasePrioForceL3CosEntry 3 }
rlMacBasePrioForceL3CosParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMacBasePrioForceL3CosParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holds the global parameters of
the L3 cos :TC, UP,DSCP."
::= { rlMacBasePrio 5 }
rlMacBasePrioForceL3CosParamsEntry OBJECT-TYPE
SYNTAX RlMacBasePrioForceL3CosParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { rlMacBasePrioForceL3CosParamsEntryIndex }
::= { rlMacBasePrioForceL3CosParamsTable 1 }
RlMacBasePrioForceL3CosParamsEntry ::=
SEQUENCE {
rlMacBasePrioForceL3CosParamsEntryIndex
INTEGER,
rlMacBasePrioForceL3CosParamsEntryTC
INTEGER,
rlMacBasePrioForceL3CosParamsEntryUP
INTEGER,
rlMacBasePrioForceL3CosParamsEntryDSCP
INTEGER
}
rlMacBasePrioForceL3CosParamsEntryIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index of the ForceL3Cos parameters table."
::= { rlMacBasePrioForceL3CosParamsEntry 1 }
rlMacBasePrioForceL3CosParamsEntryTC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the globla TC"
::= { rlMacBasePrioForceL3CosParamsEntry 2 }
rlMacBasePrioForceL3CosParamsEntryUP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the globla UP"
::= { rlMacBasePrioForceL3CosParamsEntry 3 }
rlMacBasePrioForceL3CosParamsEntryDSCP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the globla DSCP"
::= { rlMacBasePrioForceL3CosParamsEntry 4 }
rlMacBasePrioSADATCEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controlls the activation of SA/DA priority feature in Mac base
priority"
::= { rlMacBasePrio 6 }
rlMacBasePrioSADATCTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlMacBasePrioSADATCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about ranges
of addresses that are used in the mac based ptiority
with the ForceL3Cos feature."
::= { rlMacBasePrio 7 }
rlMacBasePrioSADATCEntry OBJECT-TYPE
SYNTAX RlMacBasePrioSADATCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about ranges of MAC addresses
that are used in the mac based priority with
the ForeL3Cos feature"
INDEX { rlMacBasePrioSADATCAddress,rlMacBasePrioSADATCMask }
::= { rlMacBasePrioSADATCTable 1 }
RlMacBasePrioSADATCEntry ::=
SEQUENCE {
rlMacBasePrioSADATCAddress
MacAddress,
rlMacBasePrioSADATCMask
MacAddress,
rlMacBasePrioSADATCPrio
INTEGER,
rlMacBasePrioSADATCRowStatus
RowStatus
}
rlMacBasePrioSADATCAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The range of address of this entry.
The range may not hold MAC multicast addresses. "
::= { rlMacBasePrioSADATCEntry 1 }
rlMacBasePrioSADATCMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
learned address before being compared to
the value in the rlMacBasePrioSADATCAddress field."
::= { rlMacBasePrioSADATCEntry 2 }
rlMacBasePrioSADATCPrio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority that will assign to all MAC
addresses that are match the range of this entry."
::= { rlMacBasePrioSADATCEntry 3 }
rlMacBasePrioSADATCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlMacBasePrioSADATCEntry 4 }
END