mibs/MIBS/cisco/CISCOSB-VRRP

426 lines
14 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CISCOSB-VRRP DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, Counter32,
Integer32, mib-2, Unsigned32 FROM SNMPv2-SMI
DisplayString, TimeInterval, RowStatus
FROM SNMPv2-TC
vrrpv3OperationsEntry,
vrrpv3AssociatedIpAddrEntry FROM VRRPV3-MIB
ipSpec FROM CISCOSB-IP
InterfaceIndexOrZero FROM IF-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB;
rlVrrp MODULE-IDENTITY
LAST-UPDATED "201012090000Z" -- June 9, 2010
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for VRRPv3 MIB."
REVISION "201012090000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ipSpec 26 }
-- Textual Conventions
-- rlVrrpv3OperationsTable --
rlVrrpv3OperationsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlVrrpv3OperationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is parallel to vrrpv3OperationsTable, and is used
to change VRRP on interface working version, description and
display several statuses.
It contains private objects."
::= { rlVrrp 1 }
rlVrrpv3OperationsEntry OBJECT-TYPE
SYNTAX RlVrrpv3OperationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An operation entry mapping for a particular interface."
AUGMENTS { vrrpv3OperationsEntry }
::= { rlVrrpv3OperationsTable 1 }
RlVrrpv3OperationsEntry ::= SEQUENCE {
rlVrrpv3OperationsDefaultPrimaryIpAddr InetAddress,
rlVrrpv3OperationsPrimaryIpAddrState INTEGER,
rlVrrpv3OperationsVrDescription DisplayString,
rlVrrpv3OperationsVrrpVersion INTEGER,
rlVrrpv3OperationsAdminState INTEGER,
rlVrrpv3OperationsMasterPriority Unsigned32,
rlVrrpv3OperationsMasterAdvInterval TimeInterval,
rlVrrpv3OperationsMasterDownInterval TimeInterval,
rlVrrpv3OperationsSkewTime TimeInterval,
rlVrrpv3OperationsTrackObject Unsigned32,
rlVrrpv3OperationsTrackStatus INTEGER,
rlVrrpv3OperationsTrackDecrementPriority Unsigned32,
rlVrrpv3OperationsTrackOperPriority Unsigned32
}
rlVrrpv3OperationsDefaultPrimaryIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
vrrpv3OperationsMasterIpAddr', should the virtual
router transition from backup state to master and no
vrrpv3OperationsDefaultPrimaryIpAddr was configured."
::= { rlVrrpv3OperationsEntry 1 }
rlVrrpv3OperationsPrimaryIpAddrState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents enabled/disabled state of user configured
primary address of the virtual router."
DEFVAL { down }
::= { rlVrrpv3OperationsEntry 2 }
rlVrrpv3OperationsVrDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The description of the VRRP virtual router."
::= { rlVrrpv3OperationsEntry 3 }
rlVrrpv3OperationsAdminState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to `backup'
or `master', depending on the value of `vrrpOperPriority'.
Setting the value to `down', will transition the
router from `master' or `backup' to `initialize'. State
transitions may not be immediate; they sometimes depend on
other factors, such as the interface (IF) state."
DEFVAL { down }
::= { rlVrrpv3OperationsEntry 4 }
rlVrrpv3OperationsVrrpVersion OBJECT-TYPE
SYNTAX INTEGER {
version2and3(1),
version2(2),
version3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current VRRP virtual router version it is working with."
DEFVAL { version3 }
::= { rlVrrpv3OperationsEntry 5 }
rlVrrpv3OperationsMasterPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the priority which is used by master router."
::= { rlVrrpv3OperationsEntry 6 }
rlVrrpv3OperationsMasterAdvInterval OBJECT-TYPE
SYNTAX TimeInterval (1..4095)
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval, in centiseconds, which is used by master router
for sending advertisement messages. "
::= { rlVrrpv3OperationsEntry 7 }
rlVrrpv3OperationsMasterDownInterval OBJECT-TYPE
SYNTAX TimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval for Backup to declare Master down (centiseconds)."
::= { rlVrrpv3OperationsEntry 8 }
rlVrrpv3OperationsSkewTime OBJECT-TYPE
SYNTAX TimeInterval
UNITS "centiseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time to skew Master_Down_Interval in milliseconds."
::= { rlVrrpv3OperationsEntry 9 }
rlVrrpv3OperationsTrackObject OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of associates a track object with this VRRP router.
0 - no association"
DEFVAL { 0 }
::= { rlVrrpv3OperationsEntry 10 }
rlVrrpv3OperationsTrackStatus OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Track status"
::= { rlVrrpv3OperationsEntry 11 }
rlVrrpv3OperationsTrackDecrementPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..253)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount by which the priority for the router is decremented (or incremented)
when the tracked object goes down (or comes back up)."
DEFVAL { 10 }
::= { rlVrrpv3OperationsEntry 12 }
rlVrrpv3OperationsTrackOperPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational priority"
::= { rlVrrpv3OperationsEntry 13 }
-- rlVrrpv3AssociatedIpAddrTable --
rlVrrpv3AssociatedIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlVrrpv3AssociatedIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is parallel to vrrpv3AssociatedIpAddrTable, and is used
to display address statuses.
It contains private objects."
::= { rlVrrp 2 }
rlVrrpv3AssociatedIpAddrEntry OBJECT-TYPE
SYNTAX RlVrrpv3AssociatedIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table contains an IP address that is
associated with a virtual router"
AUGMENTS { vrrpv3AssociatedIpAddrEntry }
::= { rlVrrpv3AssociatedIpAddrTable 1 }
RlVrrpv3AssociatedIpAddrEntry ::= SEQUENCE {
rlVrrpv3AssociatedIpAddrState INTEGER
}
rlVrrpv3AssociatedIpAddrState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents state of the assosiated IP address,
backed up by current virtual router."
DEFVAL { down }
::= { rlVrrpv3AssociatedIpAddrEntry 1 }
-- VRRP Router Counters Table
rlVrrpv3CountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlVrrpv3CountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of virtual router statistics."
::= { rlVrrp 3 }
rlVrrpv3CountersEntry OBJECT-TYPE
SYNTAX RlVrrpv3CountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing statistics
information about a given virtual router."
INDEX { rlVrrpv3CountersIfIndex }
::= { rlVrrpv3CountersTable 1 }
RlVrrpv3CountersEntry ::=
SEQUENCE {
rlVrrpv3CountersIfIndex InterfaceIndexOrZero,
rlVrrpv3CountersChecksumErrors Counter32,
rlVrrpv3CountersRcvdPacketsLength Counter32,
rlVrrpv3CountersIpTtlErrors Counter32,
rlVrrpv3CountersRcvdInvalidTypePackets Counter32,
rlVrrpv3CountersRcvdInvalidVrrpId Counter32,
rlVrrpv3CountersProtoErrors Counter32,
rlVrrpv3CountersAddressListErrors Counter32,
rlVrrpv3CountersAdvIntervalErrors Counter32,
rlVrrpv3CountersAuthErrors Counter32,
rlVrrpv3CountersRowStatus RowStatus
}
rlVrrpv3CountersIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index"
::= { rlVrrpv3CountersEntry 1 }
rlVrrpv3CountersChecksumErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of checksum errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 2 }
rlVrrpv3CountersRcvdPacketsLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packet length errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 3 }
rlVrrpv3CountersIpTtlErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of TTL errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 4 }
rlVrrpv3CountersRcvdInvalidTypePackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid VRRP packet type errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 5 }
rlVrrpv3CountersRcvdInvalidVrrpId OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid VRRP id errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 6 }
rlVrrpv3CountersProtoErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid VRRP protocol errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 7 }
rlVrrpv3CountersAddressListErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid IP address list errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 8 }
rlVrrpv3CountersAdvIntervalErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid advertisement interval errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 9 }
rlVrrpv3CountersAuthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of authentication errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface."
::= { rlVrrpv3CountersEntry 10 }
rlVrrpv3CountersRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of the entry. Used for clearing table by setting."
::= { rlVrrpv3CountersEntry 11 }
END