david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCOSB-rlFft

1906 lines
53 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CISCOSB-rlFft DEFINITIONS ::= BEGIN
-- Title: CISCOSB FFT Private Extension
-- Version: 7.37.00.00
-- Date: 17 May 2004
IMPORTS
switch001 FROM CISCOSB-MIB
Unsigned32, IpAddress,
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
RowStatus, TruthValue, PhysAddress, DisplayString,
TEXTUAL-CONVENTION FROM SNMPv2-TC
InetAddress, InetAddressType,
InetAddressPrefixLength FROM INET-ADDRESS-MIB;
Percents ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specifies percents."
SYNTAX INTEGER (0..100)
NetNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specifies the network identification."
SYNTAX OCTET STRING (SIZE(4))
---
--- rlIpFFT
---
rlFFT MODULE-IDENTITY
LAST-UPDATED "200406010000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for switch001 Fast Forwarding Tables."
REVISION "200406010000Z"
DESCRIPTION
"Initial version of this MIB."
::= { switch001 47 }
rlIpFFT OBJECT IDENTIFIER ::= { rlFFT 1 }
rlIpFftMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpFFT 1 }
rlInetMaxFftNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IP FFTs."
::= { rlIpFFT 2 }
rlInetFftDynamicSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether dynamic IP FFTs are supported."
::= { rlIpFFT 3 }
rlInetFftSubnetSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether subtable per IP subnet is supported."
::= { rlIpFFT 4 }
rlIpFftUnknownAddrMsgUsed OBJECT-TYPE
SYNTAX INTEGER {
used (1),
unused (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the 3SW uses the unknown address message."
::= { rlIpFFT 5 }
rlInetFftAgingTimeSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether aging time is supported."
::= { rlIpFFT 6 }
rlIpFftSrcAddrSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether an IP subtable per station contains source IP address."
::= { rlIpFFT 7 }
rlInetFftAgingTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aging timeout in seconds."
::= { rlIpFFT 8 }
rlIpFftRedBoundary OBJECT-TYPE
SYNTAX Percents
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The red boundary in percents."
::= { rlIpFFT 9 }
rlIpFftYellowBoundary OBJECT-TYPE
SYNTAX Percents
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The yellow boundary in percents."
::= { rlIpFFT 10 }
--rlIpFftPollingInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The polling interval for dynamic IP FFTs support in seconds."
-- ::= { rlIpFFT 11 }
--
-- The IP FFT Number Routers Table
--
rlInetFftNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetFftNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing routes' numbers of
the IP SFFTs and IP NFFTs. "
::= { rlIpFFT 12 }
rlInetFftNumEntry OBJECT-TYPE
SYNTAX RlInetFftNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the containing routes' numbers
of IP SFFT and IP NFFT "
INDEX { rlInetFftNumIndex, rlInetFftNumAddressType }
::= { rlInetFftNumTable 1 }
RlInetFftNumEntry ::= SEQUENCE {
rlInetFftNumIndex INTEGER,
rlInetFftNumAddressType InetAddressType,
rlInetFftNumStnRoutesNumber INTEGER,
rlInetFftNumSubRoutesNumber INTEGER,
rlInetFftNumInetTomeRoutesNumber INTEGER
}
rlInetFftNumIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IP FFT. "
::= { rlInetFftNumEntry 1 }
rlInetFftNumAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inet address type that are contained in the IP SFFT. "
::= { rlInetFftNumEntry 2 }
rlInetFftNumStnRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes that are contained in the IP SFFT. "
::= { rlInetFftNumEntry 3 }
rlInetFftNumSubRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes that are contained in the IP NFFT. "
::= { rlInetFftNumEntry 4 }
rlInetFftNumInetTomeRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes that are Inet To Me. "
::= { rlInetFftNumEntry 5 }
--
-- The IP Fast Forwarding Table per station
--
rlInetFftStnTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetFftStnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table contains IP Fast Forwarding information
per station for IP datagrams. "
::= { rlIpFFT 13 }
rlInetFftStnEntry OBJECT-TYPE
SYNTAX RlInetFftStnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) contains the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlInetFftStnIndex, rlInetFftStnMrid, rlInetFftStnDstInetAddressType, rlInetFftStnDstInetAddress }
::= { rlInetFftStnTable 1 }
RlInetFftStnEntry ::= SEQUENCE {
rlInetFftStnIndex INTEGER,
rlInetFftStnMrid INTEGER,
rlInetFftStnDstInetAddressType InetAddressType,
rlInetFftStnDstInetAddress InetAddress,
rlInetFftStnDstRouteInetPrefix InetAddressPrefixLength,
rlInetFftStnDstInetAddrType INTEGER,
rlInetFftStnDstMacAddress PhysAddress,
rlInetFftStnSrcMacAddress PhysAddress,
rlInetFftStnOutIfIndex INTEGER,
rlInetFftStnVid INTEGER,
rlInetFftStnTaggedMode INTEGER,
rlInetFftStnAge INTEGER
}
rlInetFftStnIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IP FFT. "
::= { rlInetFftStnEntry 1 }
rlInetFftStnMrid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router's Instance Identifier in the SFFT. "
::= { rlInetFftStnEntry 2 }
rlInetFftStnDstInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ip destination type for which this entry
contains IP forwarding information."
::= { rlInetFftStnEntry 3 }
rlInetFftStnDstInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP destination address for which this entry
contains IP forwarding information."
::= { rlInetFftStnEntry 4 }
rlInetFftStnDstRouteInetPrefix OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP destination prefix for which this entry
contains IP forwarding information."
::= { rlInetFftStnEntry 5 }
rlInetFftStnDstInetAddrType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
remote (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP destination address type. "
::= { rlInetFftStnEntry 6 }
rlInetFftStnDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC destination address."
::= { rlInetFftStnEntry 7}
rlInetFftStnSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC source address."
::= { rlInetFftStnEntry 8 }
rlInetFftStnOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlInetFftStnEntry 9 }
rlInetFftStnVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vid of the output port."
::= { rlInetFftStnEntry 10 }
rlInetFftStnTaggedMode OBJECT-TYPE
SYNTAX INTEGER {
untagged (1),
tagged (2),
basedPortConfig (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tagged value of the port. When the Tagged field is not
a part of the FFT table in the ASIC,
the Tagged field gets the BasedPortConfig value "
::= { rlInetFftStnEntry 11 }
rlInetFftStnAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of the entry in seconds from the inserting."
::= { rlInetFftStnEntry 12 }
--
-- The IP Fast Forwarding Table per subnet
--
rlInetFftSubTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetFftSubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IP Fast Forwarding information
per subnet for IP datagrams. "
::= { rlIpFFT 14 }
rlInetFftSubEntry OBJECT-TYPE
SYNTAX RlInetFftSubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlInetFftSubMrid , rlInetFftSubDstInetSubnetType, rlInetFftSubDstInetSubnet, rlInetFftSubDstInetPrefix }
::= { rlInetFftSubTable 1 }
RlInetFftSubEntry ::= SEQUENCE {
rlInetFftSubMrid INTEGER,
rlInetFftSubDstInetSubnetType InetAddressType,
rlInetFftSubDstInetSubnet InetAddress,
rlInetFftSubDstInetPrefix InetAddressPrefixLength,
rlInetFftSubNextHopSetRefCount INTEGER,
rlInetFftSubNextHopCount INTEGER,
rlInetFftSubNextHopIfindex1 INTEGER,
rlInetFftSubNextHopInetAddr1Type InetAddressType,
rlInetFftSubNextHopInetAddr1 InetAddress,
rlInetFftSubNextHopIfindex2 INTEGER,
rlInetFftSubNextHopInetAddr2Type InetAddressType,
rlInetFftSubNextHopInetAddr2 InetAddress,
rlInetFftSubNextHopIfindex3 INTEGER,
rlInetFftSubNextHopInetAddr3Type InetAddressType,
rlInetFftSubNextHopInetAddr3 InetAddress,
rlInetFftSubNextHopIfindex4 INTEGER,
rlInetFftSubNextHopInetAddr4Type InetAddressType,
rlInetFftSubNextHopInetAddr4 InetAddress,
rlInetFftSubNextHopIfindex5 INTEGER,
rlInetFftSubNextHopInetAddr5Type InetAddressType,
rlInetFftSubNextHopInetAddr5 InetAddress,
rlInetFftSubNextHopIfindex6 INTEGER,
rlInetFftSubNextHopInetAddr6Type InetAddressType,
rlInetFftSubNextHopInetAddr6 InetAddress,
rlInetFftSubNextHopIfindex7 INTEGER,
rlInetFftSubNextHopInetAddr7Type InetAddressType,
rlInetFftSubNextHopInetAddr7 InetAddress,
rlInetFftSubNextHopIfindex8 INTEGER,
rlInetFftSubNextHopInetAddr8Type InetAddressType,
rlInetFftSubNextHopInetAddr8 InetAddress,
rlInetFftSubAge INTEGER
}
rlInetFftSubMrid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router's Instance Identifier in the NFFT. "
::= { rlInetFftSubEntry 1 }
rlInetFftSubDstInetSubnetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP destination subnet type for which this entry
contains IP forwarding information."
::= { rlInetFftSubEntry 2 }
rlInetFftSubDstInetSubnet OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP destination subnet for which this entry
contains IP forwarding information."
::= { rlInetFftSubEntry 3 }
rlInetFftSubDstInetPrefix OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP destination prefix for which this entry
contains IP forwarding information."
::= { rlInetFftSubEntry 4 }
rlInetFftSubNextHopSetRefCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of NFFT entries that used the given NextHop set (ECMP path). "
::= { rlInetFftSubEntry 5 }
rlInetFftSubNextHopCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 6 }
rlInetFftSubNextHopIfindex1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 7 }
rlInetFftSubNextHopInetAddr1Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 8 }
rlInetFftSubNextHopInetAddr1 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 9 }
rlInetFftSubNextHopIfindex2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 10 }
rlInetFftSubNextHopInetAddr2Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 11 }
rlInetFftSubNextHopInetAddr2 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 12 }
rlInetFftSubNextHopIfindex3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 13 }
rlInetFftSubNextHopInetAddr3Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 14 }
rlInetFftSubNextHopInetAddr3 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 15 }
rlInetFftSubNextHopIfindex4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 16 }
rlInetFftSubNextHopInetAddr4Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 17 }
rlInetFftSubNextHopInetAddr4 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 18 }
rlInetFftSubNextHopIfindex5 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 19 }
rlInetFftSubNextHopInetAddr5Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 20 }
rlInetFftSubNextHopInetAddr5 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 21 }
rlInetFftSubNextHopIfindex6 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 22 }
rlInetFftSubNextHopInetAddr6Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 23 }
rlInetFftSubNextHopInetAddr6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 24 }
rlInetFftSubNextHopIfindex7 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 25 }
rlInetFftSubNextHopInetAddr7Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 26 }
rlInetFftSubNextHopInetAddr7 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 27 }
rlInetFftSubNextHopIfindex8 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 28 }
rlInetFftSubNextHopInetAddr8Type OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 29 }
rlInetFftSubNextHopInetAddr8 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
::= { rlInetFftSubEntry 30 }
rlInetFftSubAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of the entry in seconds from the inserting."
::= { rlInetFftSubEntry 31 }
--
-- The IP FFT Counters Table
--
rlInetFftCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetFftCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IP Counters information
per one IP FFT."
::= { rlIpFFT 15 }
rlInetFftCountersEntry OBJECT-TYPE
SYNTAX RlInetFftCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IP Counters
information containing amount of IP datagrams passed
by certain IP FFT."
INDEX { rlInetFftCountersIndex }
::= { rlInetFftCountersTable 1 }
RlInetFftCountersEntry ::= SEQUENCE {
rlInetFftCountersIndex INTEGER,
rlInetFftInReceives INTEGER,
rlInetFftForwDatagrams INTEGER,
rlInetFftInDiscards INTEGER
}
rlInetFftCountersIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IP FFT."
::= { rlInetFftCountersEntry 1 }
rlInetFftInReceives OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of received IP datagrams "
::= { rlInetFftCountersEntry 2 }
rlInetFftForwDatagrams OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of forwarded IP datagrams "
::= { rlInetFftCountersEntry 3 }
rlInetFftInDiscards OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of discarded IP datagrams "
::= { rlInetFftCountersEntry 4 }
--
-- The IP NextHop Table (used by NFFT and Remote SFFT)
--
rlInetFftNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetFftNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table contains NextHop information
used for routing IP datagrams. "
::= { rlIpFFT 16 }
rlInetFftNextHopEntry OBJECT-TYPE
SYNTAX RlInetFftNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) contains the NextHop info
information for routing IP datagrams."
INDEX { rlInetFftNextHopifindex, rlInetFftNextHopInetAddressType, rlInetFftNextHopInetAddress}
::= { rlInetFftNextHopTable 1 }
RlInetFftNextHopEntry ::= SEQUENCE {
rlInetFftNextHopifindex INTEGER,
rlInetFftNextHopInetAddressType InetAddressType,
rlInetFftNextHopInetAddress InetAddress,
rlInetFftNextHopValid INTEGER,
rlInetFftNextHopType INTEGER,
rlInetFftNextHopReferenceCount INTEGER,
rlInetFftNextHopNetAddress PhysAddress,
rlInetFftNextHopVid INTEGER,
rlInetFftNextHopMacAddress PhysAddress,
rlInetFftNextHopOutIfIndex INTEGER
}
rlInetFftNextHopifindex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the IP Interface index of the NextHop. "
::= { rlInetFftNextHopEntry 1 }
rlInetFftNextHopInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of a NextHop for which an entry contains
IP forwarding information. "
::= { rlInetFftNextHopEntry 2 }
rlInetFftNextHopInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of a NextHop for which an entry contains
IP forwarding information. "
::= { rlInetFftNextHopEntry 3 }
rlInetFftNextHopValid OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NextHop Valid bit. When L2 info is missing,
a NextHop has Invalid value. "
::= { rlInetFftNextHopEntry 4 }
rlInetFftNextHopType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
remote (2),
reject (3),
drop (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NextHop type. "
::= { rlInetFftNextHopEntry 5 }
rlInetFftNextHopReferenceCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IF LPM is supported:
If ecmp supported:
the field NextHop_ref_count used to save number
of NextHop SETs that use the NextHop.
Otherwise, NextHop_ref_count used to save number of
NFFT entries that use the NextHop.
IF LPM is NOT supported:
NextHop_ref_count used to save number of
Remote SFFT entries that use the NextHop. "
::= { rlInetFftNextHopEntry 6 }
rlInetFftNextHopNetAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NextHop Physical Address."
::= { rlInetFftNextHopEntry 7 }
rlInetFftNextHopVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vid of the output port."
::= { rlInetFftNextHopEntry 8 }
rlInetFftNextHopMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC destination address."
::= { rlInetFftNextHopEntry 9}
rlInetFftNextHopOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlInetFftNextHopEntry 10 }
--
-- The L2 info Table (used by NextHop and Direct SFFT)
--
rlInetFftL2InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlInetFftL2InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table contains L2 information
used for routing IP datagrams. "
::= { rlIpFFT 17 }
rlInetFftL2InfoEntry OBJECT-TYPE
SYNTAX RlInetFftL2InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) contains the L2 info
information for routing IP datagrams."
INDEX { rlInetFftL2InfoIfindex, rlInetFftL2InfoDstMacAddress }
::= { rlInetFftL2InfoTable 1 }
RlInetFftL2InfoEntry ::= SEQUENCE {
rlInetFftL2InfoIfindex INTEGER,
rlInetFftL2InfoDstMacAddress PhysAddress,
rlInetFftL2InfoValid INTEGER,
rlInetFftL2InfoType INTEGER,
rlInetFftL2InfoReferenceCount INTEGER,
rlInetFftL2InfoVid INTEGER,
rlInetFftL2InfoSrcMacAddress PhysAddress,
rlInetFftL2InfoOutIfIndex INTEGER,
rlInetFftL2InfoTaggedMode INTEGER
}
rlInetFftL2InfoIfindex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN Ifindex of the destination port. "
::= { rlInetFftL2InfoEntry 1 }
rlInetFftL2InfoDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC destination address."
::= { rlInetFftL2InfoEntry 2}
rlInetFftL2InfoValid OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The L2 info entry valid bit. When L2 info is missing some information,
an L2 info has Invalid value. "
::= { rlInetFftL2InfoEntry 3 }
rlInetFftL2InfoType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
vlan (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The L2 info type. With Enthernet media l2 info type is vlan.
WIth Tunneling feature, l2 info type will be expanded. "
::= { rlInetFftL2InfoEntry 4 }
rlInetFftL2InfoReferenceCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reference count contains a number of
NextHop entries that use this L2 info."
::= { rlInetFftL2InfoEntry 5 }
rlInetFftL2InfoVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vid of the destination port. "
::= { rlInetFftL2InfoEntry 6 }
rlInetFftL2InfoSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC source address placed to Ehernet Header of IP forwarded packet."
::= { rlInetFftL2InfoEntry 7}
rlInetFftL2InfoOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex of output physical port the packet is forwarded through."
::= { rlInetFftL2InfoEntry 8 }
rlInetFftL2InfoTaggedMode OBJECT-TYPE
SYNTAX INTEGER {
untagged (1),
tagged (2),
basedPortConfig (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tagged value of the port. When the Tagged field is not
a part of the FFT table in the ASIC,
the Tagged field get the BasedPortConfig value."
::= { rlInetFftL2InfoEntry 9 }
rlIpv6FftRedBoundary OBJECT-TYPE
SYNTAX Percents
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The red boundary in percents."
::= { rlIpFFT 18 }
rlIpv6FftYellowBoundary OBJECT-TYPE
SYNTAX Percents
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The yellow boundary in percents."
::= { rlIpFFT 19 }
---
--- rlIpxFFT
---
rlIpxFFT OBJECT IDENTIFIER ::= { rlFFT 2 }
rlIpxFftMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpxFFT 1 }
rlIpxMaxFftNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun number of IPX FFTs. An IPX FFT gets a number
from 1 until rlIpxMaxFftSetNumber."
::= { rlIpxFFT 2 }
rlIpxFftDynamicSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether dynamic IPX FFTs are supported."
::= { rlIpxFFT 3 }
rlIpxFftNetworkSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether subtable per IPX network is supported."
::= { rlIpxFFT 4 }
rlIpxFftUnknownAddrMsgUsed OBJECT-TYPE
SYNTAX INTEGER {
used (1),
unused (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the 3SW uses the unknown address message."
::= { rlIpxFFT 5 }
rlIpxFftAgingTimeSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether aging time is supported for subtable per station."
::= { rlIpxFFT 6 }
rlIpxFftSrcAddrSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether an IPX subtable per station contains source
IPX address."
::= { rlIpxFFT 7 }
rlIpxFftAgingTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aging timeout in seconds."
::= { rlIpxFFT 8 }
rlIpxFftRedBoundary OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The red boundary in percents."
::= { rlIpxFFT 9 }
rlIpxFftYellowBoundary OBJECT-TYPE
SYNTAX Percents
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The yellow boundary in percents."
::= { rlIpxFFT 10 }
--rlIpxFftPollingInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The polling interval for dynamic IPX FFTs support in seconds."
-- ::= { rlIpxFFT 11 }
--
-- The IPX FFT Number Routers Table
--
rlIpxFftNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing number routes of
the IPX Fast Forwarding Table. "
::= { rlIpxFFT 12 }
rlIpxFftNumEntry OBJECT-TYPE
SYNTAX RlIpxFftNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the containing number routes of
of IPX SFFT and IPX NFFT "
INDEX { rlIpxFftNumIndex }
::= { rlIpxFftNumTable 1 }
RlIpxFftNumEntry ::= SEQUENCE {
rlIpxFftNumIndex INTEGER,
rlIpxFftNumStnRoutesNumber INTEGER,
rlIpxFftNumSubRoutesNumber INTEGER
}
rlIpxFftNumIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPX FFT. "
::= { rlIpxFftNumEntry 1 }
rlIpxFftNumStnRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes containing in the IPX SFFT. "
::= { rlIpxFftNumEntry 2 }
rlIpxFftNumSubRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes containing in the IPX NFFT. "
::= { rlIpxFftNumEntry 3 }
--
-- The IPX Fast Forwarding Table per station
--
rlIpxFftStnTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftStnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IPX Fast Forwarding information
per station for IPX. "
::= { rlIpxFFT 13 }
rlIpxFftStnEntry OBJECT-TYPE
SYNTAX RlIpxFftStnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpxFftStnIndex, rlIpxFftStnDstNetid, rlIpxFftStnDstNode,
rlIpxFftStnSrcNetid, rlIpxFftStnSrcNode }
::= { rlIpxFftStnTable 1 }
RlIpxFftStnEntry ::= SEQUENCE {
rlIpxFftStnIndex INTEGER,
rlIpxFftStnDstNetid NetNumber,
rlIpxFftStnDstNode PhysAddress,
rlIpxFftStnSrcNetid NetNumber,
rlIpxFftStnSrcNode PhysAddress,
rlIpxFftStnDstIpxAddrType INTEGER,
rlIpxFftStnEncapsulation INTEGER,
rlIpxFftStnDstMacAddress PhysAddress,
rlIpxFftStnSrcMacAddress PhysAddress,
rlIpxFftStnOutIfIndex INTEGER,
rlIpxFftStnTci INTEGER,
rlIpxFftStnFacsIndex INTEGER,
rlIpxFftStnAge INTEGER
}
rlIpxFftStnIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPX FFT. "
::= { rlIpxFftStnEntry 1 }
rlIpxFftStnDstNetid OBJECT-TYPE
SYNTAX NetNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination network for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 2 }
rlIpxFftStnDstNode OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination node for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 3 }
rlIpxFftStnSrcNetid OBJECT-TYPE
SYNTAX NetNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source network for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 4 }
rlIpxFftStnSrcNode OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination node for which this entry
contains IPX forwarding information."
::= { rlIpxFftStnEntry 5 }
rlIpxFftStnDstIpxAddrType OBJECT-TYPE
SYNTAX INTEGER {
local (1),
remote (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address type. "
::= { rlIpxFftStnEntry 6 }
rlIpxFftStnEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
novell(1),
ethernet(2),
llc(3),
snap(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation method associated with this route."
::= { rlIpxFftStnEntry 7 }
rlIpxFftStnDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC destination address."
::= { rlIpxFftStnEntry 8 }
rlIpxFftStnSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC source address."
::= { rlIpxFftStnEntry 9 }
rlIpxFftStnOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlIpxFftStnEntry 10 }
rlIpxFftStnTci OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of TCI or 0."
::= { rlIpxFftStnEntry 11 }
rlIpxFftStnFacsIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of index of the FACS Table."
::= { rlIpxFftStnEntry 12 }
rlIpxFftStnAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of the entry in seconds."
::= { rlIpxFftStnEntry 13 }
--
-- The IPX Fast Forwarding Table per network
--
rlIpxFftSubTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftSubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IPX Fast Forwarding information
per network for IPX . "
::= { rlIpxFFT 14 }
rlIpxFftSubEntry OBJECT-TYPE
SYNTAX RlIpxFftSubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpxFftSubIndex, rlIpxFftSubDstNetid }
::= { rlIpxFftSubTable 1 }
RlIpxFftSubEntry ::= SEQUENCE {
rlIpxFftSubIndex INTEGER,
rlIpxFftSubDstNetid NetNumber,
rlIpxFftSubEncapsulation INTEGER,
rlIpxFftSubDstMacAddress PhysAddress,
rlIpxFftSubSrcMacAddress PhysAddress,
rlIpxFftSubOutIfIndex INTEGER,
rlIpxFftSubTci INTEGER,
rlIpxFftSubFacsIndex INTEGER,
rlIpxFftSubAge INTEGER
}
rlIpxFftSubIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPX FFT. "
::= { rlIpxFftSubEntry 1 }
rlIpxFftSubDstNetid OBJECT-TYPE
SYNTAX NetNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination network for which this entry
contains IPX forwarding information."
::= { rlIpxFftSubEntry 2 }
rlIpxFftSubEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
novell(1),
ethernet(2),
llc(3),
snap(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation method associated with this route."
::= { rlIpxFftSubEntry 3 }
rlIpxFftSubDstMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC destination address."
::= { rlIpxFftSubEntry 4 }
rlIpxFftSubSrcMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC source address."
::= { rlIpxFftSubEntry 5 }
rlIpxFftSubOutIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex of output physical port."
::= { rlIpxFftSubEntry 6 }
rlIpxFftSubTci OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of TCI or 0."
::= { rlIpxFftSubEntry 7 }
rlIpxFftSubFacsIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of index of the FACS Table."
::= { rlIpxFftSubEntry 8 }
rlIpxFftSubAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of the entry in seconds."
::= { rlIpxFftSubEntry 9 }
--
-- The IPX FFT Counters Table
--
rlIpxFftCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpxFftCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IPX Counters information
per one IPX FFT."
::= { rlIpxFFT 15 }
rlIpxFftCountersEntry OBJECT-TYPE
SYNTAX RlIpxFftCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IP Counters
information containing amount of IPX datagrams passed
by certain IPX FFT."
INDEX { rlIpxFftCountersIndex }
::= { rlIpxFftCountersTable 1 }
RlIpxFftCountersEntry ::= SEQUENCE {
rlIpxFftCountersIndex INTEGER,
rlIpxFftInReceives INTEGER,
rlIpxFftForwDatagrams INTEGER,
rlIpxFftInDiscards INTEGER
}
rlIpxFftCountersIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPX FFT."
::= { rlIpxFftCountersEntry 1 }
rlIpxFftInReceives OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of received IPX datagrams "
::= { rlIpxFftCountersEntry 2 }
rlIpxFftForwDatagrams OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of forwarded IPX datagrams "
::= { rlIpxFftCountersEntry 3 }
rlIpxFftInDiscards OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of discarded IPX datagrams "
::= { rlIpxFftCountersEntry 4 }
---
--- rlIpmFFT
---
rlIpmFFT OBJECT IDENTIFIER ::= { rlFFT 3 }
rlIpmFftMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlIpmFFT 1 }
rlIpmMaxFftNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun number of IPM FFTs. NT_IPM gets a number
from Host Parameters"
::= { rlIpmFFT 2 }
rlIpmFftDynamicSupported OBJECT-TYPE
SYNTAX INTEGER {
supported (1),
unsupported (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether dynamic IPM FFTs are supported.
An NT_IPM gets a number from Host Parameters"
::= { rlIpmFFT 3 }
rlIpmFftUnknownAddrMsgUsed OBJECT-TYPE
SYNTAX INTEGER {
used (1),
unused (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the 3SW uses the unknown address message.
An NT_IPM gets a number from Host Parameters"
::= { rlIpmFFT 4 }
rlIpmFftUserAgingTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aging timeout in seconds. SNMP user writes.
There is a default value of aging timeout."
::= { rlIpmFFT 5 }
rlIpmFftRouterAgingTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aging timeout in seconds. NT_IPM keeps value that
Router level gave. This is high priority value for aging timeout."
::= { rlIpmFFT 6 }
--rlIpmFftPollingInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The polling interval for dynamic IPM FFT's support in seconds."
-- ::= { rlIpmFFT 7 }
--
-- The IPM FFT Number Routers Table
--
rlIpmFftNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing number routes of
the IPM Fast Forwarding Table. "
::= { rlIpmFFT 8 }
rlIpmFftNumEntry OBJECT-TYPE
SYNTAX RlIpmFftNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the containing number routes of
an IPM FFT."
INDEX { rlIpmFftNumIndex }
::= { rlIpmFftNumTable 1 }
RlIpmFftNumEntry ::= SEQUENCE {
rlIpmFftNumIndex INTEGER,
rlIpmFftNumRoutesNumber INTEGER
}
rlIpmFftNumIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPM FFT."
::= { rlIpmFftNumEntry 1 }
rlIpmFftNumRoutesNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of routes containing in the IPM FFT."
::= { rlIpmFftNumEntry 2 }
--
-- The IPM Fast Forwarding Table
--
rlIpmFftTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IPM Fast Forwarding information
for IPM datagrams."
::= { rlIpmFFT 9 }
rlIpmFftEntry OBJECT-TYPE
SYNTAX RlIpmFftEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IPM fast forwarding
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpmFftIndex, rlIpmFftSrcIpAddress, rlIpmFftDstIpAddress }
::= { rlIpmFftTable 1 }
RlIpmFftEntry ::= SEQUENCE {
rlIpmFftIndex INTEGER,
rlIpmFftSrcIpAddress IpAddress,
rlIpmFftDstIpAddress IpAddress,
rlIpmFftSrcIpMask IpAddress,
rlIpmFftInputIfIndex INTEGER,
rlIpmFftInputVlanTag INTEGER,
rlIpmFftForwardAction INTEGER,
rlIpmFftInportAction INTEGER,
rlIpmFftAge INTEGER
}
rlIpmFftIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPM FFT. "
::= { rlIpmFftEntry 1 }
rlIpmFftSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP source address for which this entry
contains IPM forwarding information."
::= { rlIpmFftEntry 2 }
rlIpmFftDstIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPM destination address for which this entry
contains IPM forwarding information."
::= { rlIpmFftEntry 3 }
rlIpmFftSrcIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP source mask for which this entry
contains IP forwarding information."
::= { rlIpmFftEntry 4 }
rlIpmFftInputIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The input ifIndex for which this entry
contains IPM forwarding information."
::= { rlIpmFftEntry 5 }
rlIpmFftInputVlanTag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The input Vlan tag together with input ifIndex defines
pair (ifIndex, tag)"
::= { rlIpmFftEntry 6 }
rlIpmFftForwardAction OBJECT-TYPE
SYNTAX INTEGER {
forward(1),
discard (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPM forward action."
::= { rlIpmFftEntry 7 }
rlIpmFftInportAction OBJECT-TYPE
SYNTAX INTEGER {
sentToCPU(1),
discard (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPM illegal input port action."
::= { rlIpmFftEntry 8 }
rlIpmFftAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age of the entry in seconds from the moment of inserting. "
::= { rlIpmFftEntry 9 }
--
-- The IPM FFT Output Port and Tag Table
--
rlIpmFftPortTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftPortTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IPM FFT output port tag information
for IPM datagrams."
::= { rlIpmFFT 10 }
rlIpmFftPortTagEntry OBJECT-TYPE
SYNTAX RlIpmFftPortTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IPM FFT output port tag
information for IP datagrams from a particular source and
destination addresses."
INDEX { rlIpmFftPortIndex, rlIpmFftPortSrcIpAddress,
rlIpmFftPortDstIpAddress, rlIpmFftPortOutputifIndex,
rlIpmFftPortOutputTag }
::= { rlIpmFftPortTagTable 1 }
RlIpmFftPortTagEntry ::= SEQUENCE {
rlIpmFftPortIndex INTEGER,
rlIpmFftPortSrcIpAddress IpAddress,
rlIpmFftPortDstIpAddress IpAddress,
rlIpmFftPortOutputifIndex INTEGER,
rlIpmFftPortOutputTag INTEGER
}
rlIpmFftPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPM FFT. "
::= { rlIpmFftPortTagEntry 1 }
rlIpmFftPortSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP source address for which this entry
contains IPM output port tag information."
::= { rlIpmFftPortTagEntry 2 }
rlIpmFftPortDstIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPM destination address for which this entry
contains IPM port tag information."
::= { rlIpmFftPortTagEntry 3 }
rlIpmFftPortOutputifIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The output ifIndex "
::= { rlIpmFftPortTagEntry 4 }
rlIpmFftPortOutputTag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The output Vlan tag together with output ifIndex defines
pair (ifIndex, tag)"
::= { rlIpmFftPortTagEntry 5 }
--
-- The IPM FFT Counters Table
--
rlIpmFftCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpmFftCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing IPM Counters information
per FFT number. "
::= { rlIpmFFT 11 }
rlIpmFftCountersEntry OBJECT-TYPE
SYNTAX RlIpmFftCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the IPM Counters
information containing amount of IPM datagrams passed by certain FFT."
INDEX { rlIpmFftCountersIndex }
::= { rlIpmFftCountersTable 1 }
RlIpmFftCountersEntry ::= SEQUENCE {
rlIpmFftCountersIndex INTEGER,
rlIpmFftInReceives INTEGER,
rlIpmFftForwDatagrams INTEGER,
rlIpmFftInDiscards INTEGER
}
rlIpmFftCountersIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the index of the IPM FFT. "
::= { rlIpmFftCountersEntry 1 }
rlIpmFftInReceives OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of received IPM datagrams "
::= { rlIpmFftCountersEntry 2 }
rlIpmFftForwDatagrams OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of forwarded IPM datagrams "
::= { rlIpmFftCountersEntry 3 }
rlIpmFftInDiscards OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of discarded IPM datagrams "
::= { rlIpmFftCountersEntry 4 }
END
Reference in New Issue Copy Permalink