mibs/MIBS/cisco/CISCOSB-rlIP-MIB

335 lines
11 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CISCOSB-rlIP-MIB DEFINITIONS ::= BEGIN
-- Title: CISCOSB IP MIB
-- IP Extension/Private MIB
-- IPv6 auto configured address representation support
-- based on IP standard MIB IP-MIB
-- Version: 0.00
-- Date: 16 June 2013
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Counter32, IpAddress,
mib-2, Unsigned32, Counter64,
zeroDotZero FROM SNMPv2-SMI
PhysAddress, TruthValue,
TimeStamp, RowPointer,
TEXTUAL-CONVENTION, TestAndIncr,
RowStatus, StorageType, DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
InetAddress, InetAddressType,
InetAddressPrefixLength,
InetVersion, InetZoneIndex FROM INET-ADDRESS-MIB
InterfaceIndex FROM IF-MIB
IpAddressOriginTC, IpAddressStatusTC
FROM IP-MIB
switch001 FROM CISCOSB-MIB;
rlIp MODULE-IDENTITY
LAST-UPDATED "201306161200Z" -- Sun June 16 12:00:00 PST 2011
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for Auto Configured IPv6 Address representation."
REVISION "201306161200Z"
DESCRIPTION
"Initial version of this MIB."
::= { switch001 250 }
--
-- The textual conventions we define and use in this MIB.
--
RlIpAddressOriginTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The origin of the address.
following are same as ipAddressOriginTC in standard MIB:
manual(2) indicates that the address was manually configured
to a specified address, e.g., by user configuration.
dhcp(4) indicates an address that was assigned to this
system by a DHCP server.
linklayer(5) indicates an address created by IPv6 stateless
auto-configuration.
random(6) indicates an address chosen by the system at
random, e.g., an IPv4 address within 169.254/16, or an RFC
3041 privacy address.
following are additional to standard MIB:
autoConfig(7) indicates that the address was auto configured configured
to a specified address, e.g., not by user configuration.
eui64(8) indicates that the address was partially configured configured
to a specified address, e.g., address suffix is based on MAC address with
EUI-64 representation.
tunnelIsatap(9) indicates that the address an ISATATP tunnel representation.
tunnelIsatap(10) indicates that the address an 6to4 tunnel representation.
tunnelIsatap(11) indicates that the address was partially configured configured
to a specified address, e.g., address prefix is preconfigured.
"
SYNTAX INTEGER {
other(1),
manual(2),
dhcp(4),
linklayer(5),
random(6),
-- additional to standard MIB
autoConfig(7),
eui64(8),
tunnelIsatap(9),
tunnel6to4(10),
generalPrefix(11)
}
--
-- Internet Address Table (Private/Extension)
--
rlIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains addressing information relevant to the
entity's interfaces.
in addition to ipAddressTable defined in standard MIB a represenattion of
IPv6 addresses based on additionl address origin such as EUI-64, general
prefix etc.
In this case the address information is partial address information.
Together with the address origin and the general prefix (when needed) user can
construct full address information.
The index (key) for this table includes this information additionally to the address."
::= { rlIp 1 }
rlIpAddressEntry OBJECT-TYPE
SYNTAX RlIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An address mapping for a particular interface."
INDEX { rlIpAddressAddrType,
rlIpAddressAddr,
rlIpAddressOrigin,
rlIpAddressGeneralPrefixName }
::= { rlIpAddressTable 1 }
RlIpAddressEntry ::= SEQUENCE {
rlIpAddressAddrType InetAddressType,
rlIpAddressAddr InetAddress,
-- additional to standard MIB
rlIpAddressOrigin RlIpAddressOriginTC,
rlIpAddressGeneralPrefixName
DisplayString,
--
rlIpAddressIfIndex InterfaceIndex,
rlIpAddressExtdType INTEGER,
rlIpAddressPrefix RowPointer,
-- following filed has changed to a key
-- rlIpAddressOrigin IpAddressOriginTC,
rlIpAddressStatus IpAddressStatusTC,
rlIpAddressCreated TimeStamp,
rlIpAddressLastChanged TimeStamp,
rlIpAddressRowStatus RowStatus,
rlIpAddressStorageType StorageType,
-- additional fields - based on 'IpAddressEntry' augmentation
rlIpAddressExtdPrefixLength InetAddressPrefixLength,
rlIpAddressCompleteAddr InetAddress
}
rlIpAddressAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of rlIpAddressAddr."
::= { rlIpAddressEntry 1 }
rlIpAddressAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing information
pertains. The address type of this object is specified in
rlIpAddressAddrType.
In case of auto-configure address such as eui-64, general-prefix and others
it contains the partial address before appropriate manipulation.
Implementors need to be aware that if the size of
rlIpAddressAddr exceeds 116 octets, then OIDS of instances of
columns in this row will have more than 128 sub-identifiers
and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
::= { rlIpAddressEntry 2 }
-- additional to standard MIB
rlIpAddressOrigin OBJECT-TYPE
SYNTAX RlIpAddressOriginTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The origin of the address."
::= { rlIpAddressEntry 3 }
rlIpAddressGeneralPrefixName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name assigned to the prefix."
::= { rlIpAddressEntry 4 }
rlIpAddressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex."
::= { rlIpAddressEntry 5 }
rlIpAddressExtdType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
broadcast(3),
multicast(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Extend standard field ipAddressType to multicast"
DEFVAL { unicast }
::= { rlIpAddressEntry 6 }
rlIpAddressPrefix OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A pointer to the row in the prefix table to which this
address belongs. May be { 0 0 } if there is no such row."
DEFVAL { zeroDotZero }
::= { rlIpAddressEntry 7 }
-- following filed has changed to a key
-- rlIpAddressOrigin OBJECT-TYPE
-- SYNTAX IpAddressOriginTC
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The origin of the address."
-- ::= { rlIpAddressEntry 8 }
rlIpAddressStatus OBJECT-TYPE
SYNTAX IpAddressStatusTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the address, describing if the address can be
used for communication.
In the absence of other information, an IPv4 address is
always preferred(1)."
DEFVAL { preferred }
::= { rlIpAddressEntry 8 }
rlIpAddressCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this entry was created.
If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value."
::= { rlIpAddressEntry 9 }
rlIpAddressLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value."
::= { rlIpAddressEntry 10 }
rlIpAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
A conceptual row can not be made active until the
rlIpAddressIfIndex has been set to a valid index."
::= { rlIpAddressEntry 11 }
rlIpAddressStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. If this object
has a value of 'permanent', then no other objects are
required to be able to be modified."
DEFVAL { volatile }
::= { rlIpAddressEntry 12 }
-- additional fields - based on 'ipAddressEntry' augmentation
rlIpAddressExtdPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of this address."
DEFVAL { 64 }
::= { rlIpAddressEntry 13 }
rlIpAddressCompleteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Complete IP address to which this entry's addressing information
pertains.
In case of auto-configure address such as eui-64, general-prefix and others
it contains the complete address after appropriate manipulation"
::= { rlIpAddressEntry 14 }
END