mibs/MIBS/cisco/CISCOSBLAN1-MIB

396 lines
11 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CISCOSBLAN1-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
TruthValue, MacAddress, TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
switch001
FROM CISCOSB-MIB
VlanId
FROM Q-BRIDGE-MIB;
rlLan1 MODULE-IDENTITY
LAST-UPDATED "201506300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The Lan1 MIB module for supporting Lan1 fetaure."
REVISION "201506300000Z"
DESCRIPTION
"Initial version."
::= { switch001 224 }
-- TEXTUAL-CONVENTION
GroupId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"group id."
SYNTAX INTEGER (0..1279)
GroupIdList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
groups, with the first octet specifying groups 1 through
8, the second octet specifying groups 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered group, and the least significant bit
represents the highest numbered group. Thus, each group
is represented by a single bit within the value of this
object. If that bit has a value of '1' then that group
is included in the set of groups; the group is not
included if its bit has a value of '0'."
SYNTAX OCTET STRING
VlanIdOrNone ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"group id."
SYNTAX INTEGER (0..4094)
-- Scalars
rlLan1STagEtherType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Ethernet type identifying the S-VLAN tag."
DEFVAL { '0000'H }
::= { rlLan1 1 }
rlLan1CPVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the CP VLAN ID.
0 indicateds no CP vlan."
DEFVAL { 0 }
::= { rlLan1 2 }
rlLan1CPVlanCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the cos assigned to ingress traffic on module ports into
the CP VLAN."
DEFVAL { 0 }
::= { rlLan1 3 }
rlLan1x86Port OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interface-id of the Ethernet port connecting LAN1 to the
x86 environment implementing Virtual Functions (VFs).
0 indicateds no x86 port defined."
DEFVAL { 0 }
::= { rlLan1 4 }
----------------------------
-- rlLan1x86VlanMappingTable
----------------------------
rlLan1x86VlanMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlLan1x86VlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information mapping s-tag to group id."
::= { rlLan1 5 }
rlLan1x86VlanMappingEntry OBJECT-TYPE
SYNTAX RlLan1x86VlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping of incoming s-tag to a group."
INDEX { rlLan1x86VlanMappingVlanId }
::= { rlLan1x86VlanMappingTable 1 }
RlLan1x86VlanMappingEntry ::=
SEQUENCE {
rlLan1x86VlanMappingVlanId
VlanId,
rlLan1x86VlanMappingGroupId
GroupId,
rlLan1x86VlanMappingRowStatus
RowStatus
}
rlLan1x86VlanMappingVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The s-tag to mapped to group"
::= { rlLan1x86VlanMappingEntry 1 }
rlLan1x86VlanMappingGroupId OBJECT-TYPE
SYNTAX GroupId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"group for filtering traffic"
::= { rlLan1x86VlanMappingEntry 2 }
rlLan1x86VlanMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { rlLan1x86VlanMappingEntry 3 }
----------------------------
-- rlLan1VfMacMappingTable
----------------------------
rlLan1VfMacMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlLan1VfMacMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information mapping Mac to s-tag."
::= { rlLan1 6 }
rlLan1VfMacMappingEntry OBJECT-TYPE
SYNTAX RlLan1VfMacMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping of incoming s-tag to a group."
INDEX { rlLan1VfMacMappingDstMacAddress }
::= { rlLan1VfMacMappingTable 1 }
RlLan1VfMacMappingEntry ::=
SEQUENCE {
rlLan1VfMacMappingDstMacAddress
MacAddress,
rlLan1VfMacMappingVlanId
VlanId,
rlLan1VfMacMappingMulticast
INTEGER,
rlLan1VfMacMappingRowStatus
RowStatus
}
rlLan1VfMacMappingDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"destination mac address"
::= { rlLan1VfMacMappingEntry 1 }
rlLan1VfMacMappingVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The s-tag"
::= { rlLan1VfMacMappingEntry 2 }
rlLan1VfMacMappingMulticast OBJECT-TYPE
SYNTAX INTEGER {
none(1),
cp(2),
noncp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" cp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic bridged into the CP VLAN from modules to x86
noncp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic "
DEFVAL { none }
::= { rlLan1VfMacMappingEntry 3 }
rlLan1VfMacMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { rlLan1VfMacMappingEntry 4 }
----------------------------
-- rlLan1ModulePortTable
----------------------------
rlLan1ModulePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlLan1ModulePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information on a LAN1 module port."
::= { rlLan1 7 }
rlLan1ModulePortEntry OBJECT-TYPE
SYNTAX RlLan1ModulePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping of incoming s-tag to a group."
INDEX { rlLan1ModulePortIfIndex }
::= { rlLan1ModulePortTable 1 }
RlLan1ModulePortEntry ::=
SEQUENCE {
rlLan1ModulePortIfIndex
INTEGER,
rlLan1ModulePortCPAllowed
TruthValue,
rlLan1ModulePortMulticastBroadcastAllowedVlan
INTEGER,
rlLan1ModulePortIngressGroupId
GroupId,
rlLan1ModulePortEgressGroupIdList
GroupIdList,
rlLan1ModulePortRowStatus
RowStatus
}
rlLan1ModulePortIfIndex OBJECT-TYPE
SYNTAX INTEGER (0..1000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the interface-id."
DEFVAL { 0 }
::= { rlLan1ModulePortEntry 1 }
rlLan1ModulePortCPAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies that CP traffic is allowed on the port, it is used to
allow CP multicast/broadcast traffic."
DEFVAL { false }
::= { rlLan1ModulePortEntry 2 }
rlLan1ModulePortMulticastBroadcastAllowedVlan OBJECT-TYPE
SYNTAX INTEGER {
none(1),
cp(2),
noncp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies that multicast/broadcast traffic is allowed on the CP VLAN
or on non-CP VLAN.
If the parameter is not configured then only unicast traffic is allowed."
DEFVAL { none }
::= { rlLan1ModulePortEntry 3 }
rlLan1ModulePortIngressGroupId OBJECT-TYPE
SYNTAX GroupId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the group number assigned to the input frame on the interface"
DEFVAL { 0 }
::= { rlLan1ModulePortEntry 4 }
rlLan1ModulePortEgressGroupIdList OBJECT-TYPE
SYNTAX GroupIdList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the list of egress group numbers"
DEFVAL { ''H }
::= { rlLan1ModulePortEntry 5 }
rlLan1ModulePortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { rlLan1ModulePortEntry 6 }
----------------------------
-- rlLan1x86PfcTable
----------------------------
rlLan1x86PfcTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlLan1x86PfcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information on a LAN1 x86 port PFC configuration per priority."
::= { rlLan1 8 }
rlLan1x86PfcEntry OBJECT-TYPE
SYNTAX RlLan1x86PfcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PFC information per priority"
INDEX { rlLan1x86PriorityIndex }
::= { rlLan1x86PfcTable 1 }
RlLan1x86PfcEntry ::=
SEQUENCE {
rlLan1x86PriorityIndex
INTEGER,
rlLan1x86PriorityIsLossy
TruthValue,
rlLan1x86PriorityXoffThreshold
INTEGER,
rlLan1x86PriorityXonThreshold
INTEGER
}
rlLan1x86PriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the priority index."
DEFVAL { 0 }
::= { rlLan1x86PfcEntry 1 }
rlLan1x86PriorityIsLossy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if priority is lossy or lossless"
DEFVAL { true }
::= { rlLan1x86PfcEntry 2 }
rlLan1x86PriorityXoffThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the value of triggering pause frames when crossing over the threshold"
::= { rlLan1x86PfcEntry 3 }
rlLan1x86PriorityXonThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the value of triggering continue frames when crossing under the threshold"
::= { rlLan1x86PfcEntry 4 }
END