6869 lines
245 KiB
Plaintext
6869 lines
245 KiB
Plaintext
|
COMTROL-ES8510-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
internet FROM RFC1155-SMI
|
||
|
|
RowStatus, DisplayString, MacAddress, TimeInterval FROM SNMPv2-TC
|
||
|
|
PortList FROM Q-BRIDGE-MIB;
|
||
|
|
|
||
|
|
|
||
|
|
private OBJECT IDENTIFIER ::= { internet 4 }
|
||
|
|
enterprises OBJECT IDENTIFIER ::= { private 1 }
|
||
|
|
comtrol OBJECT IDENTIFIER ::= { enterprises 2882 }
|
||
|
|
products OBJECT IDENTIFIER ::= { comtrol 2 }
|
||
|
|
managedSwitch OBJECT IDENTIFIER ::= { products 1 }
|
||
|
|
es8510 OBJECT IDENTIFIER ::= { managedSwitch 1 }
|
||
|
|
|
||
|
|
contact MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201805140000Z"
|
||
|
|
ORGANIZATION "Comtrol Corporation"
|
||
|
|
CONTACT-INFO "Comtrol Corporation"
|
||
|
|
DESCRIPTION "Comtrol Corporation
|
||
|
|
100 Fifth Avenue NW
|
||
|
|
New Brighton, MN 55112
|
||
|
|
TEL: +1.763.957.6000
|
||
|
|
E-mail: ftpadmin@comtrol.com"
|
||
|
|
REVISION "201805140000Z"
|
||
|
|
DESCRIPTION "version 3.1a"
|
||
|
|
::= { comtrol 1 }
|
||
|
|
|
||
|
|
systemInfo OBJECT IDENTIFIER ::= { es8510 1 }
|
||
|
|
basicSetting OBJECT IDENTIFIER ::= { es8510 2 }
|
||
|
|
portConfiguration OBJECT IDENTIFIER ::= { es8510 3 }
|
||
|
|
networkRedundancy OBJECT IDENTIFIER ::= { es8510 4 }
|
||
|
|
vlan OBJECT IDENTIFIER ::= { es8510 5 }
|
||
|
|
trafficPrioritization OBJECT IDENTIFIER ::= { es8510 6 }
|
||
|
|
multicastFiltering OBJECT IDENTIFIER ::= { es8510 7 }
|
||
|
|
snmp OBJECT IDENTIFIER ::= { es8510 8 }
|
||
|
|
security OBJECT IDENTIFIER ::= { es8510 9 }
|
||
|
|
warning OBJECT IDENTIFIER ::= { es8510 10 }
|
||
|
|
monitorandDiag OBJECT IDENTIFIER ::= { es8510 11 }
|
||
|
|
save OBJECT IDENTIFIER ::= { es8510 12 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Textual Convention
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
AlertType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- systemInfo
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
systemName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..255))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An administratively-assigned name for this managed node.
|
||
|
|
By convention, this is the node's fully-qualified domain name."
|
||
|
|
::= { systemInfo 1 }
|
||
|
|
|
||
|
|
systemLocation OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..255))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The physical location of this node (e.g., telephone closet,
|
||
|
|
3rd floor')."
|
||
|
|
::= { systemInfo 2 }
|
||
|
|
|
||
|
|
systemContact OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..255))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The textual identification of the contact person for this
|
||
|
|
managed node, together with information on how to contact
|
||
|
|
this person."
|
||
|
|
::= { systemInfo 3 }
|
||
|
|
|
||
|
|
systemDescr OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..255))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A textual description of the entity. This value should
|
||
|
|
include the full name and version identification of the
|
||
|
|
system's hardware type, software operating-system, and
|
||
|
|
networking software. It is mandatory that this only contain
|
||
|
|
printable ASCII characters."
|
||
|
|
::= { systemInfo 4 }
|
||
|
|
|
||
|
|
systemFwVer OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..20))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Firmware version of the device."
|
||
|
|
::= { systemInfo 5 }
|
||
|
|
|
||
|
|
systemMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The MAC address of this device. An Media Access Control
|
||
|
|
address (MAC address) is a unique identifier attached to
|
||
|
|
most network adapters (NICs). It is a number that acts
|
||
|
|
like a name for a particular network adapter"
|
||
|
|
::= { systemInfo 6 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- basicSetting
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
switchSetting OBJECT IDENTIFIER ::= { basicSetting 1 }
|
||
|
|
adminPassword OBJECT IDENTIFIER ::= { basicSetting 2 }
|
||
|
|
ipConfiguration OBJECT IDENTIFIER ::= { basicSetting 3 }
|
||
|
|
timeSetting OBJECT IDENTIFIER ::= { basicSetting 4 }
|
||
|
|
dhcpServer OBJECT IDENTIFIER ::= { basicSetting 5 }
|
||
|
|
backupAndRestore OBJECT IDENTIFIER ::= { basicSetting 6 }
|
||
|
|
tftpUpgrade OBJECT IDENTIFIER ::= { basicSetting 7 }
|
||
|
|
factoryDefault OBJECT IDENTIFIER ::= { basicSetting 8 }
|
||
|
|
systemReboot OBJECT IDENTIFIER ::= { basicSetting 9 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- switchSetting
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
switchSettingSystemName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (1..256))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An administratively-assigned name for this managed node. By
|
||
|
|
convention, this is the node's fully-qualified domain name."
|
||
|
|
::= { switchSetting 1 }
|
||
|
|
|
||
|
|
switchSettingSystemLocation OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..256))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The physical location of this node (e.g., telephone closet,
|
||
|
|
3rd floor')."
|
||
|
|
::= { switchSetting 2 }
|
||
|
|
|
||
|
|
switchSettingSystemContact OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..256))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The textual identification of the contact person for this
|
||
|
|
managed node, together with information on how to contact
|
||
|
|
this person."
|
||
|
|
::= { switchSetting 3 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- adminPassword
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
adminPasswordUserName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..20))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The name(ID) of security manager."
|
||
|
|
::= { adminPassword 1 }
|
||
|
|
|
||
|
|
adminPasswordPassword OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..8))
|
||
|
|
MAX-ACCESS write-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The password of security manager.
|
||
|
|
This object can't be read. it's write-only."
|
||
|
|
::= { adminPassword 2 }
|
||
|
|
|
||
|
|
--adminPasswordConfirm OBJECT-TYPE
|
||
|
|
-- SYNTAX DisplayString (SIZE(0..8))
|
||
|
|
-- MAX-ACCESS write-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "To confirm the password modification.
|
||
|
|
-- This object can't be read. it's write-only."
|
||
|
|
-- ::= { adminPassword 3 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- ipConfiguration
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
ipConfigurationTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IPconfigurationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
the IP of the device."
|
||
|
|
::= { ipConfiguration 1 }
|
||
|
|
|
||
|
|
ipConfigurationEntry OBJECT-TYPE
|
||
|
|
SYNTAX IPconfigurationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information configuring static IP or DHCP configuration
|
||
|
|
of the device."
|
||
|
|
INDEX { ipConfigurationIndex }
|
||
|
|
::= { ipConfigurationTable 1 }
|
||
|
|
|
||
|
|
IPconfigurationEntry ::= SEQUENCE {
|
||
|
|
ipConfigurationIndex INTEGER,
|
||
|
|
ipConfigurationDHCPStatus INTEGER,
|
||
|
|
ipConfigurationAddress IpAddress,
|
||
|
|
ipConfigurationSubMask IpAddress,
|
||
|
|
ipConfigurationGateway IpAddress,
|
||
|
|
ipConfigurationDNS1 IpAddress,
|
||
|
|
ipConfigurationDNS2 IpAddress,
|
||
|
|
ipConfigurationStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
ipConfigurationIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object identifies IP configuration entries."
|
||
|
|
::= { ipConfigurationEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
ipConfigurationDHCPStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Parameter configuring DHCP client functionality of the
|
||
|
|
device. When enabled, device will be a DHCP client and
|
||
|
|
request for the IP configuration from DHCP server.
|
||
|
|
|
||
|
|
The Dynamic Host Configuration Protocol (DHCP) automates
|
||
|
|
the assignment of IP addresses, subnet masks, default
|
||
|
|
routers, and other IP parameters. The assignment usually
|
||
|
|
occurs when the DHCP-configured machine boots up or regains
|
||
|
|
connectivity to the network. The DHCP client sends out a
|
||
|
|
query requesting a response from a DHCP server on the
|
||
|
|
locally attached network. The query is typically initiated
|
||
|
|
immediately after booting up and before the client initiates
|
||
|
|
any IP based communication with other hosts. The DHCP server
|
||
|
|
then replies to the client with its assigned IP address,
|
||
|
|
subnet mask, DNS server and default gateway information.
|
||
|
|
|
||
|
|
Note: Other items in this table will not be modified, when
|
||
|
|
ipConfigurationDHCPStatus is enabled."
|
||
|
|
::= { ipConfigurationEntry 2 }
|
||
|
|
|
||
|
|
ipConfigurationAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address of switch.
|
||
|
|
An IP address (Internet Protocol address) is a unique address
|
||
|
|
that devices use in order to identify and communicate with
|
||
|
|
each other on a computer network utilizing the Internet
|
||
|
|
Protocol standard (IP). Any participating network device can
|
||
|
|
has its own unique address."
|
||
|
|
::= { ipConfigurationEntry 3 }
|
||
|
|
|
||
|
|
ipConfigurationSubMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The subnet mask is a 32-bit number in the same format and
|
||
|
|
representation as IP addresses. The subnet mask determines
|
||
|
|
which bits in the IP address are interpreted as the network
|
||
|
|
number, which as the subnetwork number, and which as the
|
||
|
|
host number. Each IP address bit that corresponds to a 1
|
||
|
|
in the subnet mask is in the network/subnetwork part of
|
||
|
|
the address. This group of numbers is also called the
|
||
|
|
Network ID. Each IP address bit that corresponds to a 0 is
|
||
|
|
in the host part of the IP address."
|
||
|
|
::= { ipConfigurationEntry 4 }
|
||
|
|
|
||
|
|
ipConfigurationGateway OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The default gateway IP address identifies the gateway (for
|
||
|
|
example, a router) that receives and forwards those packets
|
||
|
|
whose addresses are unknown to the local network. The agent
|
||
|
|
uses the default gateway address when sending alert packets
|
||
|
|
to the management workstation on a network other than the
|
||
|
|
local network."
|
||
|
|
::= { ipConfigurationEntry 5 }
|
||
|
|
|
||
|
|
ipConfigurationDNS1 OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Parameter configuring the first DNS server of the device.
|
||
|
|
|
||
|
|
The domain name system (DNS) stores and associates many
|
||
|
|
types of information with domain names. Most importantly,
|
||
|
|
it translates domain names (computer hostnames) to IP
|
||
|
|
addresses, which makes it possible to attach easy-to-remember
|
||
|
|
domain names to hard-to-remember IP
|
||
|
|
addresses (such as 100.50.10.100)."
|
||
|
|
::= { ipConfigurationEntry 6 }
|
||
|
|
|
||
|
|
ipConfigurationDNS2 OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Parameter configuring the second DNS server of the device."
|
||
|
|
::= { ipConfigurationEntry 7 }
|
||
|
|
|
||
|
|
ipConfigurationStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of the IP configuration entry. Only one
|
||
|
|
configuration entry is supported on the device. Set active(1)
|
||
|
|
to activate the parameters of the entry on the device."
|
||
|
|
::= { ipConfigurationEntry 8 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- timeSetting
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
systemTime OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "current system time in format yyyy.mm.dd-hh:mm:ss"
|
||
|
|
::= { timeSetting 1 }
|
||
|
|
|
||
|
|
utcTimeZone OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
gmtNegative1200EniwetokKwajalein(1),
|
||
|
|
gmtNegative1100MidwayIslandSamoa(2),
|
||
|
|
gmtNegative1000Hawaii(3),
|
||
|
|
gmtNegative0900Alaska(4),
|
||
|
|
gmtNegative0800PacificTimeUSandCanadaTijuana(5),
|
||
|
|
gmtNegative0700Arizona(6),
|
||
|
|
gmtNegative0700MountainTimeUSandCanada(7),
|
||
|
|
gmtNegative0600CentralAmerica(8),
|
||
|
|
gmtNegative0600CentralTimeUSandCanada(9),
|
||
|
|
gmtNegative0600MexicoCityTegucigalpa(10),
|
||
|
|
gmtNegative0600Saskatchewan(11),
|
||
|
|
gmtNegative0500BogotaLimaQuito(12),
|
||
|
|
gmtNegative0500EasternTimeUSandCanada(13),
|
||
|
|
gmtNegative0500IndianaEast(14),
|
||
|
|
gmtNegative0400AtlanticTimeCanada(15),
|
||
|
|
gmtNegative0400CaracasLaPaz(16),
|
||
|
|
gmtNegative0400Santiago(17),
|
||
|
|
gmtNegative0330Newfoundland(18),
|
||
|
|
gmtNegative0300Brasilia(19),
|
||
|
|
gmtNegative0300BuenosAiresGeorgetown(20),
|
||
|
|
gmtNegative0300Greenland(21),
|
||
|
|
gmtNegative0200Mid-Atlantic(22),
|
||
|
|
gmtNegative0100AzoresCapeVerdeIs(23),
|
||
|
|
gmtNegative0100CapeVerdeIs(24),
|
||
|
|
gmtCasablancaMonrovia(25),
|
||
|
|
gmtGreenwichMeanTimeDublinEdinburghLisbonLondon(26),
|
||
|
|
gmtPositive0100AmsterdamBerlinBernRomeStockholmVienna(27),
|
||
|
|
gmtPositive0100BelgradeBratislavaBudapestLjubljanaPrague(28),
|
||
|
|
gmtPositive0100BrusselsCopenhagenMadridParis(29),
|
||
|
|
gmtPositive0100SarajevoSkopjeSofijaWarsawZagreb(30),
|
||
|
|
gmtPositive0100WestCentralAfrica(31),
|
||
|
|
gmtPositive0200AthensIstanbulMinsk(32),
|
||
|
|
gmtPositive0200Bucharest(33),
|
||
|
|
gmtPositive0200Cairo(34),
|
||
|
|
gmtPositive0200HararePretoria(35),
|
||
|
|
gmtPositive0200HelsinkiRigaTallinn(36),
|
||
|
|
gmtPositive0200Jerusalem(37),
|
||
|
|
gmtPositive0300BaghdadKuwaitRiyadh(38),
|
||
|
|
gmtPositive0300KuwaitRiyadh(39),
|
||
|
|
gmtPositive0300MoscowStPetersburgVolgograd(40),
|
||
|
|
gmtPositive0300Mairobi(41),
|
||
|
|
gmtPositive0330Tehran(42),
|
||
|
|
gmtPositive0400AbuDhabiMuscat(43),
|
||
|
|
gmtPositive0400BakuTbilisi(44),
|
||
|
|
gmtPositive0430Kabul(45),
|
||
|
|
gmtPositive0500Ekaterinburg(46),
|
||
|
|
gmtPositive0500IslamabadKarachiTashkent(47),
|
||
|
|
gmtPositive0530BombayCalcuttaMadrasNewDelhi(48),
|
||
|
|
gmtPositive0545Kathmandu(49),
|
||
|
|
gmtPositive0600AlmatyNovosibirsk(50),
|
||
|
|
gmtPositive0600AstanaDhaka(51),
|
||
|
|
gmtPositive0600Colombo(52),
|
||
|
|
gmtPositive0630Rangoon(53),
|
||
|
|
gmtPositive0700BangkokHanoiJakarta(54),
|
||
|
|
gmtPositive0700Krasnoyarsk(55),
|
||
|
|
gmtPositive0800BeijingChongqingHongKongUrumqi(56),
|
||
|
|
gmtPositive0800IrkutskUlaanBataar(57),
|
||
|
|
gmtPositive0800KualaLumpurSingapore(58),
|
||
|
|
gmtPositive0800Perth(59),
|
||
|
|
gmtPositive0800Taipei(60),
|
||
|
|
gmtPositive0900OsakaSapporoTokyo(61),
|
||
|
|
gmtPositive0900Seoul(62),
|
||
|
|
gmtPositive0900Yakutsk(63),
|
||
|
|
gmtPositive0930Adelaide(64),
|
||
|
|
gmtPositive0930Darwin(65),
|
||
|
|
gmtPositive1000Brisbane(66),
|
||
|
|
gmtPositive1000CanberraMelbourneSydney(67),
|
||
|
|
gmtPositive1000GuamPortMoresby(68),
|
||
|
|
gmtPositive1000Hobart(69),
|
||
|
|
gmtPositive1000Vladivostok(70),
|
||
|
|
gmtPositive1100MagadanSolomonIsNewCaledonia(71),
|
||
|
|
gmtPositive1200AucklandWllington(72),
|
||
|
|
gmtPositive1200FijiKamchatkaMarshallIs(73),
|
||
|
|
gmtPositive1300Nukualofa(74)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "UTC Timezone list.
|
||
|
|
(GMT-12:00) Eniwetok, Kwajalein
|
||
|
|
(GMT-11:00) Midway Island, Samoa
|
||
|
|
(GMT-10:00) Hawaii
|
||
|
|
(GMT-09:00) Alaska
|
||
|
|
(GMT-08:00) Pacific Time (US & Canada), Tijuana
|
||
|
|
(GMT-07:00) Arizona
|
||
|
|
(GMT-07:00) Mountain Time (US & Canada)
|
||
|
|
(GMT-06:00) Central America
|
||
|
|
(GMT-06:00) Central Time (US & Canada)
|
||
|
|
(GMT-06:00) Mexico City
|
||
|
|
(GMT-06:00) Saskatchewan
|
||
|
|
(GMT-05:00) Bogota, Lima, Quito
|
||
|
|
(GMT-05:00) Eastern Time (US & Canada)
|
||
|
|
(GMT-05:00) Indiana (East)
|
||
|
|
(GMT-04:00) Atlantic Time (Canada)
|
||
|
|
(GMT-04:00) Caracas, La Paz
|
||
|
|
(GMT-04:00) Santiago
|
||
|
|
(GMT-03:00) NewFoundland
|
||
|
|
(GMT-03:00) Brasilia
|
||
|
|
(GMT-03:00) Buenos Aires, Georgetown
|
||
|
|
(GMT-03:00) Greenland
|
||
|
|
(GMT-02:00) Mid-Atlantic
|
||
|
|
(GMT-01:00) Azores
|
||
|
|
(GMT-01:00) Cape Verde Is.
|
||
|
|
(GMT) Casablanca, Monrovia
|
||
|
|
(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London
|
||
|
|
(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
|
||
|
|
(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague
|
||
|
|
(GMT+01:00) Brussels, Copenhagen, Madrid, Paris
|
||
|
|
(GMT+01:00) Sarajevo, Skopje, Sofija, Vilnius, Warsaw, Zagreb
|
||
|
|
(GMT+01:00) West Central Africa
|
||
|
|
(GMT+02:00) Athens, Istanbul, Minsk
|
||
|
|
(GMT+02:00) Bucharest
|
||
|
|
(GMT+02:00) Cairo
|
||
|
|
(GMT+02:00) Harare, Pretoria
|
||
|
|
(GMT+02:00) Helsinki, Riga, Tallinn
|
||
|
|
(GMT+02:00) Jerusalem
|
||
|
|
(GMT+03:00) Baghdad
|
||
|
|
(GMT+03:00) Kuwait, Riyadh
|
||
|
|
(GMT+03:00) Moscow, St. Petersburg, Volgograd
|
||
|
|
(GMT+03:00) Nairobi
|
||
|
|
(GMT+03:30) Tehran
|
||
|
|
(GMT+04:00) Abu Dhabi, Muscat
|
||
|
|
(GMT+04:00) Baku, Tbilisi, Yerevan
|
||
|
|
(GMT+04:30) Kabul
|
||
|
|
(GMT+05:00) Ekaterinburg
|
||
|
|
(GMT+05:00) Islamabad, Karachi, Tashkent
|
||
|
|
(GMT+05:30) Calcutta, Chennai, Mumbai, New Delhi
|
||
|
|
(GMT+05:45) Kathmandu
|
||
|
|
(GMT+06:00) Almaty, Novosibirsk
|
||
|
|
(GMT+06:00) Astana, Dhaka
|
||
|
|
(GMT+06:00) Sri Jayawardenepura
|
||
|
|
(GMT+06:30) Rangoon
|
||
|
|
(GMT+07:00) Bangkok, Hanoi, Jakarta
|
||
|
|
(GMT+07:00) Krasnoyarsk
|
||
|
|
(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi
|
||
|
|
(GMT+08:00) Irkutsk, Ulaan Bataar
|
||
|
|
(GMT+08:00) Kuala Lumpur, Singapore
|
||
|
|
(GMT+08:00) Perth
|
||
|
|
(GMT+08:00) Taipei
|
||
|
|
(GMT+09:00) Osaka, Sapporo, Tokyo
|
||
|
|
(GMT+09:00) Seoul
|
||
|
|
(GMT+09:00) Yakutsk
|
||
|
|
(GMT+09:30) Adelaide
|
||
|
|
(GMT+09:30) Darwin
|
||
|
|
(GMT+10:00) Brisbane
|
||
|
|
(GMT+10:00) Canberra, Melbourne, Sydney
|
||
|
|
(GMT+10:00) Guam, Port Moresby
|
||
|
|
(GMT+10:00) Hobart
|
||
|
|
(GMT+10:00) Vladivostok
|
||
|
|
(GMT+11:00) Magadan, Solomon Is., New Caledonia
|
||
|
|
(GMT+12:00) Aukland, Wellington
|
||
|
|
(GMT+12:00) Fiji, Kamchatka, Marshall Is.
|
||
|
|
(GMT+13:00) Nuku'alofa"
|
||
|
|
::= { timeSetting 2 }
|
||
|
|
|
||
|
|
dayLightSavingTime OBJECT IDENTIFIER ::= { timeSetting 3 }
|
||
|
|
clockSource OBJECT IDENTIFIER ::= { timeSetting 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- dayLightSavingTime
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
daylightSavingTimeStart OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..12))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The start-time of daylight saveing period,
|
||
|
|
in format mm.n.d/hh:mm
|
||
|
|
m is month, valid range 1-12 (1=January, 2=February, ..., 12=December).
|
||
|
|
n is week of the month (1 to 5, 5 means the last week).
|
||
|
|
d is weekday, valid range 0-6 (0=Sunday, 1=Monday, ..., 6=Saturday).
|
||
|
|
hh:mm is time."
|
||
|
|
::= { dayLightSavingTime 1 }
|
||
|
|
|
||
|
|
daylightSavingTimeEnd OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..12))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The end-time of daylight saveing period,
|
||
|
|
in format mm.n.d/hh:mm
|
||
|
|
m is month, valid range 1-12 (1=January, 2=February, ..., 12=December).
|
||
|
|
n is week of the month (1 to 5, 5 means the last week).
|
||
|
|
d is weekday, valid range 0-6 (0=Sunday, 1=Monday, ..., 6=Saturday).
|
||
|
|
hh:mm is time."
|
||
|
|
::= { dayLightSavingTime 2 }
|
||
|
|
|
||
|
|
daylightSavingOffset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Daylight Saving Offset(Usually is 60 mins).
|
||
|
|
When Enable and current time at Daylight Saving Period,
|
||
|
|
the current time of the switch will be offseted by
|
||
|
|
Daylight Saving Offset."
|
||
|
|
::= { dayLightSavingTime 3 }
|
||
|
|
|
||
|
|
daylightSavingTimeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "(1)Enable Daylight Saving Time.
|
||
|
|
(2)Disable Daylight Saving Time.
|
||
|
|
Daylight Saving Time:
|
||
|
|
Use this OID to Enable/Disable Daylight Saving Time."
|
||
|
|
::= { dayLightSavingTime 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- clock source configuration
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
clockSourceSelection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
manual(1),
|
||
|
|
ntp(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { clockSource 1 }
|
||
|
|
|
||
|
|
clockSourceManual OBJECT IDENTIFIER ::= { clockSource 2 }
|
||
|
|
clockSourceNtp OBJECT IDENTIFIER ::= { clockSource 3 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- manual config
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
clockSourceManualSetting OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..19))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "set system time, in format yyyy.mm.dd-hh:mm:ss"
|
||
|
|
::= { clockSourceManual 1 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- ntp
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
--ntpClientStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- enabled(1),
|
||
|
|
-- disabled(2)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "(1)Enable SNTP clinet.
|
||
|
|
-- (2)Disable SNTP clinet.
|
||
|
|
-- SNTP is simple network time protocol.
|
||
|
|
-- Use this OID to Enable/Disable SNTP client."
|
||
|
|
-- ::= { ntp 1 }
|
||
|
|
|
||
|
|
ntpTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NtpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about NTP
|
||
|
|
servers.
|
||
|
|
|
||
|
|
NTP (Network Time Protocol) synchronizes timekeeping among a
|
||
|
|
set of distributed time servers and clients. This synchronization
|
||
|
|
allows events to be correlated when system logs are created and
|
||
|
|
other time-specific events occur.
|
||
|
|
|
||
|
|
An NTP server is configured to synchronize NTP clients. Servers
|
||
|
|
can be configured to synchronize any client or only specific
|
||
|
|
clients. NTP servers, however, will accept no synchronization
|
||
|
|
information from their clients and therefore will not let
|
||
|
|
clients update or affect the server's time settings.
|
||
|
|
|
||
|
|
This switch acts as an NTP client, which tries to let its clock
|
||
|
|
be set and synchronized by an external NTP timeserver. It can be
|
||
|
|
configured to use multiple servers (upto 4 servers)."
|
||
|
|
::= { clockSourceNtp 1 }
|
||
|
|
|
||
|
|
ntpEntry OBJECT-TYPE
|
||
|
|
SYNTAX NtpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information configuring IP addresses of NTP servers."
|
||
|
|
INDEX { ntpIndex }
|
||
|
|
::= { ntpTable 1 }
|
||
|
|
|
||
|
|
NtpEntry ::= SEQUENCE {
|
||
|
|
ntpIndex Integer32,
|
||
|
|
ntpServerIP IpAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
ntpIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object identifies the entry."
|
||
|
|
::= { ntpEntry 1 }
|
||
|
|
|
||
|
|
ntpServerIP OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address of an NTP Server. Set 0.0.0.0 or
|
||
|
|
255.255.255.255 to remove this config."
|
||
|
|
::= { ntpEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpServer
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dhcpServerEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enable or disable dhcp server function."
|
||
|
|
::= { dhcpServer 1 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpServerPoolTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dhcpServerPoolTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpServerPoolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
DHCP server of the switch."
|
||
|
|
::= { dhcpServer 2 }
|
||
|
|
|
||
|
|
dhcpServerPoolEntry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpServerPoolEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing DHCP server information
|
||
|
|
of the switch. "
|
||
|
|
INDEX { dhcpServerPoolIndex }
|
||
|
|
::= { dhcpServerPoolTable 1 }
|
||
|
|
|
||
|
|
DhcpServerPoolEntry ::= SEQUENCE {
|
||
|
|
dhcpServerPoolIndex Integer32,
|
||
|
|
dhcpServerPoolName DisplayString,
|
||
|
|
dhcpServerPoolNetwork IpAddress,
|
||
|
|
dhcpServerPoolSubMask IpAddress,
|
||
|
|
dhcpServerPoolGateway IpAddress,
|
||
|
|
dhcpServerPoolLeaseTime Integer32,
|
||
|
|
dhcpServerPoolStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
dhcpServerPoolIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The index of the Address Pool."
|
||
|
|
::= { dhcpServerPoolEntry 1 }
|
||
|
|
|
||
|
|
dhcpServerPoolName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(1..20))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The address pool name."
|
||
|
|
::= { dhcpServerPoolEntry 2 }
|
||
|
|
|
||
|
|
dhcpServerPoolNetwork OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Subnet of the IP Address Pool."
|
||
|
|
::= { dhcpServerPoolEntry 3 }
|
||
|
|
|
||
|
|
dhcpServerPoolSubMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The subnet mask of the IP Address Pool."
|
||
|
|
::= { dhcpServerPoolEntry 4 }
|
||
|
|
|
||
|
|
dhcpServerPoolGateway OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The gateway address of the IP Address Pool."
|
||
|
|
::= { dhcpServerPoolEntry 5 }
|
||
|
|
|
||
|
|
dhcpServerPoolLeaseTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The lease time(in second) of the Address Pool."
|
||
|
|
::= { dhcpServerPoolEntry 6 }
|
||
|
|
|
||
|
|
dhcpServerPoolStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of the Address Pool."
|
||
|
|
::= { dhcpServerPoolEntry 7 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpExcludedTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dhcpExcludedTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpExcludedEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
DHCP server of the switch."
|
||
|
|
::= { dhcpServer 3 }
|
||
|
|
|
||
|
|
dhcpExcludedEntry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpExcludedEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing DHCP server information
|
||
|
|
of the switch. "
|
||
|
|
INDEX { dhcpServerPoolIndex , dhcpExcludedIndex}
|
||
|
|
::= { dhcpExcludedTable 1 }
|
||
|
|
|
||
|
|
DhcpExcludedEntry ::= SEQUENCE {
|
||
|
|
dhcpExcludedIndex Integer32,
|
||
|
|
dhcpExcludedIp IpAddress,
|
||
|
|
dhcpExcludedStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
dhcpExcludedIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The index of the Excluded Table."
|
||
|
|
::= { dhcpExcludedEntry 1 }
|
||
|
|
|
||
|
|
dhcpExcludedIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address ."
|
||
|
|
::= { dhcpExcludedEntry 2 }
|
||
|
|
|
||
|
|
dhcpExcludedStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of a address pool."
|
||
|
|
::= { dhcpExcludedEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpManualBindingTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dhcpManualBindingTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpManualBindingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
DHCP server of the switch."
|
||
|
|
::= { dhcpServer 4 }
|
||
|
|
|
||
|
|
dhcpManualBindingEntry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpManualBindingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing DHCP server information
|
||
|
|
of the switch. "
|
||
|
|
INDEX { dhcpServerPoolIndex,dhcpManualBindingIndex }
|
||
|
|
::= { dhcpManualBindingTable 1 }
|
||
|
|
|
||
|
|
DhcpManualBindingEntry ::= SEQUENCE {
|
||
|
|
dhcpManualBindingIndex Integer32,
|
||
|
|
dhcpManualBindingIp IpAddress,
|
||
|
|
dhcpManualBindingMac MacAddress,
|
||
|
|
dhcpManualBindingStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
dhcpManualBindingIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The index of the Static Binding Table."
|
||
|
|
::= { dhcpManualBindingEntry 1 }
|
||
|
|
|
||
|
|
dhcpManualBindingIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address."
|
||
|
|
::= { dhcpManualBindingEntry 2 }
|
||
|
|
|
||
|
|
dhcpManualBindingMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The MAC address."
|
||
|
|
::= { dhcpManualBindingEntry 3 }
|
||
|
|
|
||
|
|
dhcpManualBindingStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of the binding."
|
||
|
|
::= { dhcpManualBindingEntry 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- dhcpStaticPortTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5
|
||
|
|
dhcpStaticPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpStaticPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Table of descriptive information and configuration about
|
||
|
|
DHCP server of the switch."
|
||
|
|
::= { dhcpServer 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1
|
||
|
|
dhcpStaticPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpStaticPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry containing DHCP server information
|
||
|
|
of the switch. "
|
||
|
|
INDEX { dhcpServerPoolIndex, dhcpStaticPortIndex }
|
||
|
|
::= { dhcpStaticPortTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
DhcpStaticPortEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
dhcpStaticPortIndex
|
||
|
|
Integer32,
|
||
|
|
dhcpStaticPortNumber
|
||
|
|
INTEGER,
|
||
|
|
dhcpStaticPortIp
|
||
|
|
IpAddress,
|
||
|
|
dhcpStaticPortStatus
|
||
|
|
RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.1
|
||
|
|
dhcpStaticPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the StaticPort Table."
|
||
|
|
::= { dhcpStaticPortEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.2
|
||
|
|
dhcpStaticPortNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number ."
|
||
|
|
::= { dhcpStaticPortEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.3
|
||
|
|
dhcpStaticPortIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address ."
|
||
|
|
::= { dhcpStaticPortEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.5.1.4
|
||
|
|
dhcpStaticPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of a static port entry."
|
||
|
|
::= { dhcpStaticPortEntry 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpOption82Table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6
|
||
|
|
dhcpOption82Table OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpOption82Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"DHCP server option82 table."
|
||
|
|
::= { dhcpServer 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1
|
||
|
|
dhcpOption82Entry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpOption82Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"DHCP server option82 entry."
|
||
|
|
INDEX { dhcpServerPoolIndex, dhcpOption82Index }
|
||
|
|
::= { dhcpOption82Table 1 }
|
||
|
|
|
||
|
|
|
||
|
|
DhcpOption82Entry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
dhcpOption82Index
|
||
|
|
Integer32,
|
||
|
|
dhcpOption82CircuitIdType
|
||
|
|
INTEGER,
|
||
|
|
dhcpOption82CircuitIdValue
|
||
|
|
OCTET STRING,
|
||
|
|
dhcpOption82RemoteIdType
|
||
|
|
INTEGER,
|
||
|
|
dhcpOption82RemoteIdValue
|
||
|
|
OCTET STRING,
|
||
|
|
dhcpOption82Ip
|
||
|
|
IpAddress,
|
||
|
|
dhcpOption82Status
|
||
|
|
RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.1
|
||
|
|
dhcpOption82Index OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the table."
|
||
|
|
::= { dhcpOption82Entry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.2
|
||
|
|
dhcpOption82CircuitIdType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
any(0),
|
||
|
|
string(2),
|
||
|
|
hexadecimal(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Circuit-ID type of this option."
|
||
|
|
::= { dhcpOption82Entry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.3
|
||
|
|
dhcpOption82CircuitIdValue OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Circuit-ID value of this option."
|
||
|
|
::= { dhcpOption82Entry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.4
|
||
|
|
dhcpOption82RemoteIdType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
{
|
||
|
|
any(0),
|
||
|
|
string(2),
|
||
|
|
hexadecimal(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Remote-ID type of this option."
|
||
|
|
::= { dhcpOption82Entry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.5
|
||
|
|
dhcpOption82RemoteIdValue OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Remote-ID value of this option."
|
||
|
|
::= { dhcpOption82Entry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.6
|
||
|
|
dhcpOption82Ip OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP Address bind to this option."
|
||
|
|
::= { dhcpOption82Entry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.6.1.7
|
||
|
|
dhcpOption82Status OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"he status of a static port entry."
|
||
|
|
::= { dhcpOption82Entry 7 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpServerLeasedTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dhcpServerLeasedTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpServerLeasedEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
DHCP server of the switch."
|
||
|
|
::= { dhcpServer 7 }
|
||
|
|
|
||
|
|
dhcpServerLeasedEntry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpServerLeasedEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing DHCP server information
|
||
|
|
of the switch. "
|
||
|
|
INDEX { dhcpServerPoolIndex, dhcpServerLeasedIndex }
|
||
|
|
::= { dhcpServerLeasedTable 1 }
|
||
|
|
|
||
|
|
DhcpServerLeasedEntry ::= SEQUENCE {
|
||
|
|
dhcpServerLeasedIndex Integer32,
|
||
|
|
dhcpServerLeasedIp IpAddress,
|
||
|
|
dhcpServerLeasedMac MacAddress,
|
||
|
|
dhcpServerLeasedType INTEGER,
|
||
|
|
dhcpServerLeasedTime Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
dhcpServerLeasedIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The index of the Leased Table."
|
||
|
|
::= { dhcpServerLeasedEntry 1 }
|
||
|
|
|
||
|
|
dhcpServerLeasedIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The client IP address."
|
||
|
|
::= { dhcpServerLeasedEntry 2 }
|
||
|
|
|
||
|
|
dhcpServerLeasedMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The client MAC address."
|
||
|
|
::= { dhcpServerLeasedEntry 3 }
|
||
|
|
|
||
|
|
dhcpServerLeasedType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
manual(1),
|
||
|
|
dynamic(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dhcpServerLeasedEntry 4 }
|
||
|
|
|
||
|
|
dhcpServerLeasedTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The lease time of the client."
|
||
|
|
::= { dhcpServerLeasedEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpRelayAgent
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dhcpRelayAgentEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enable or disable dhcp relay agent function."
|
||
|
|
::= { dhcpServer 8 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpRelayAgentPolicy
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dhcpRelayAgentPolicy OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
keep(1),
|
||
|
|
drop(2),
|
||
|
|
replace(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Keep(1): Keeps the original option 82 field and forwards to server
|
||
|
|
drop(2): Drops the option 82 field and do not add any option 82 field
|
||
|
|
replace(3): Replaces the existing option 82 field and adds new option
|
||
|
|
82 field. (This is the default setting)"
|
||
|
|
::= { dhcpServer 9 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpRelayAgentCircuitIdTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10
|
||
|
|
dhcpRelayAgentCircuitIdTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpRelayAgentCircuitIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Description."
|
||
|
|
::= { dhcpServer 10 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1
|
||
|
|
dhcpRelayAgentCircuitIdEntry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpRelayAgentCircuitIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Description."
|
||
|
|
INDEX { dhcpRelayAgentCircuitIdPortNum }
|
||
|
|
::= { dhcpRelayAgentCircuitIdTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
DhcpRelayAgentCircuitIdEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
dhcpRelayAgentCircuitIdPortNum
|
||
|
|
Integer32,
|
||
|
|
dhcpRelayAgentCircuitIdType
|
||
|
|
Integer32,
|
||
|
|
dhcpRelayAgentCircuitIdValue
|
||
|
|
OCTET STRING,
|
||
|
|
dhcpRelayAgentCircuitIdDisplay
|
||
|
|
OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.1
|
||
|
|
dhcpRelayAgentCircuitIdPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Description."
|
||
|
|
::= { dhcpRelayAgentCircuitIdEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.2
|
||
|
|
dhcpRelayAgentCircuitIdType OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 {
|
||
|
|
default(0),
|
||
|
|
string(2),
|
||
|
|
hexadecimal(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Circuit-ID type of the Option82 added by Relay Agent."
|
||
|
|
::= { dhcpRelayAgentCircuitIdEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.3
|
||
|
|
dhcpRelayAgentCircuitIdValue OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Circuit-ID value of the Option82 added by Relay Agent, the format
|
||
|
|
can be String or Hexadecimal value."
|
||
|
|
::= { dhcpRelayAgentCircuitIdEntry 3 }
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.10.1.4
|
||
|
|
dhcpRelayAgentCircuitIdDisplay OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Display the Circuit-ID value by Hexadecimal format"
|
||
|
|
::= { dhcpRelayAgentCircuitIdEntry 4 }
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.11
|
||
|
|
dhcpRelayAgentRemoteIdType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(0),
|
||
|
|
string(2),
|
||
|
|
hexadecimal(3),
|
||
|
|
ip(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Remote-ID type of the Option82 added by Relay Agent."
|
||
|
|
::= { dhcpServer 11 }
|
||
|
|
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.12
|
||
|
|
dhcpRelayAgentRemoteIdValue OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Remote-ID value of the Option82 added by Relay Agent, the format
|
||
|
|
can be String or Hexadecimal value."
|
||
|
|
::= { dhcpServer 12 }
|
||
|
|
|
||
|
|
-- 1.3.6.1.4.1.24062.2.4.1.2.5.13
|
||
|
|
dhcpRelayAgentRemoteIdDisplay OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Remote-ID value of the Option82 added by Relay Agent."
|
||
|
|
::= { dhcpServer 13 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
--dhcpHelperAddrTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dhcpHelperAddressTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DhcpHelperAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
DHCP relay helper address of the switch."
|
||
|
|
::= { dhcpServer 14 }
|
||
|
|
|
||
|
|
dhcpHelperAddressEntry OBJECT-TYPE
|
||
|
|
SYNTAX DhcpHelperAddressEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing DHCP relay information
|
||
|
|
of the switch. "
|
||
|
|
INDEX { dhcpHelperAddress }
|
||
|
|
::= { dhcpHelperAddressTable 1 }
|
||
|
|
|
||
|
|
DhcpHelperAddressEntry ::= SEQUENCE {
|
||
|
|
dhcpHelperAddress IpAddress,
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
dhcpHelperAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address ."
|
||
|
|
::= { dhcpHelperAddressEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- backupAndRestore
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
backupServerIP OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address of a TFTP server to which a
|
||
|
|
startup configuration can be uploaded."
|
||
|
|
DEFVAL { '00000000'H }
|
||
|
|
::= { backupAndRestore 1 }
|
||
|
|
|
||
|
|
backupAgentBoardFwFileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString(SIZE(0..80))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The filename to backup to."
|
||
|
|
DEFVAL { "Quagga.conf" }
|
||
|
|
::= { backupAndRestore 2 }
|
||
|
|
|
||
|
|
backupStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notActive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Setting this object to active(1) trigger the TFTP
|
||
|
|
upload action.
|
||
|
|
Setting this object to notActive(2) has no effect.
|
||
|
|
The system always returns the value notActive(2)
|
||
|
|
when this object is read."
|
||
|
|
::= { backupAndRestore 3 }
|
||
|
|
|
||
|
|
restoreServerIP OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address of a TFTP server from which the
|
||
|
|
startup configuration can be downloaded."
|
||
|
|
DEFVAL { '00000000'H }
|
||
|
|
::= { backupAndRestore 4 }
|
||
|
|
|
||
|
|
restoreAgentBoardFwFileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString(SIZE(0..80))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The file name to restore from."
|
||
|
|
DEFVAL { "Quagga.conf" }
|
||
|
|
::= { backupAndRestore 5 }
|
||
|
|
|
||
|
|
restoreStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notActive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Setting this object to active(1) trigger the TFTP
|
||
|
|
download action.
|
||
|
|
Setting this object to notActive(2) has no effect.
|
||
|
|
The system always returns the value notActive(2)
|
||
|
|
when this object is read."
|
||
|
|
::= { backupAndRestore 6 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- tftpUpgrade
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
tftpDownloadServerIP OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address of a TFTP server where a firmware image can
|
||
|
|
be downloaded."
|
||
|
|
DEFVAL { '00000000'H }
|
||
|
|
::= { tftpUpgrade 1 }
|
||
|
|
|
||
|
|
tftpDownloadAgentBoardFwFileName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString(SIZE(0..80))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The file name of the firmware to be downloaded."
|
||
|
|
DEFVAL { "firmware.bin" }
|
||
|
|
::= { tftpUpgrade 2 }
|
||
|
|
|
||
|
|
tftpDownloadStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notActive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Setting this object to active(1) trigger the TFTP
|
||
|
|
download action.
|
||
|
|
Setting this object to notActive(2) has no effect.
|
||
|
|
The system always returns the value notActive(2)
|
||
|
|
when this object is read."
|
||
|
|
::= { tftpUpgrade 3 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- factoryDefault
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
factoryDefaultActive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notActive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to active(1) to reload factory default configuration.
|
||
|
|
Reloading factory default will overwrite your current
|
||
|
|
configuration file with factocy default configuration while
|
||
|
|
current IP configuration is reserved.
|
||
|
|
Please reboot the device to make factory default configuration
|
||
|
|
take effect.
|
||
|
|
Set notActive(2) has no effect. The system always returns the
|
||
|
|
value notActive(2) when this object is read."
|
||
|
|
::= { factoryDefault 1 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- systemReboot
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
systemRebootActive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notActive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set active(1) to restart the device.
|
||
|
|
Set to notActive(2) has no effect. The device always returns
|
||
|
|
the value notActive(2) when this object is read."
|
||
|
|
DEFVAL { notActive }
|
||
|
|
::= { systemReboot 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portConfiguration
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
portControl OBJECT IDENTIFIER ::= { portConfiguration 1 }
|
||
|
|
portStatus OBJECT IDENTIFIER ::= { portConfiguration 2 }
|
||
|
|
rateLimiting OBJECT IDENTIFIER ::= { portConfiguration 3 }
|
||
|
|
portTrunk OBJECT IDENTIFIER ::= { portConfiguration 4 }
|
||
|
|
|
||
|
|
portCtrlTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortCtrlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of information and configuration for each ports."
|
||
|
|
::= { portControl 1 }
|
||
|
|
|
||
|
|
portCtrlEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortCtrlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing information and configuration for a port."
|
||
|
|
INDEX { portCtrlIndex }
|
||
|
|
::= { portCtrlTable 1 }
|
||
|
|
|
||
|
|
PortCtrlEntry ::= SEQUENCE {
|
||
|
|
portCtrlIndex INTEGER,
|
||
|
|
portCtrlPortName DisplayString,
|
||
|
|
portCtrlPortStatus INTEGER,
|
||
|
|
portCtrlSpeedAndDuplex INTEGER,
|
||
|
|
portCtrlFlowControl INTEGER,
|
||
|
|
portCtrlPortDescription DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
portCtrlIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of the port control entry."
|
||
|
|
::= { portCtrlEntry 1 }
|
||
|
|
|
||
|
|
portCtrlPortName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..7))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The name of port."
|
||
|
|
::= { portCtrlEntry 2 }
|
||
|
|
|
||
|
|
portCtrlPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "To enable or disable of this port."
|
||
|
|
::= { portCtrlEntry 3 }
|
||
|
|
|
||
|
|
portCtrlSpeedAndDuplex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
autoNegotiation(1),
|
||
|
|
tenMbpsHalfDuplex(2),
|
||
|
|
tenMbpsFullDuplex(3),
|
||
|
|
hundredMbpsHalfDuplex(4),
|
||
|
|
hundredMbpsFullDuplex(5),
|
||
|
|
thousandMbpsFullDuplex(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Speed and duplex configuraion.
|
||
|
|
|
||
|
|
Different speed and duplex modes are available. There are speeds:
|
||
|
|
1000 megabits per second (Gigabit Ethernet), 100 megabits per
|
||
|
|
second (Fast Ethernet), and 10 megabits per second (Legacy
|
||
|
|
Ethernet).
|
||
|
|
|
||
|
|
Full-duplex allows packets to be transmitted in both directions
|
||
|
|
at the same time, while half-duplex allows a device to either
|
||
|
|
transmit or receive, but not both at the same time. Full-duplex
|
||
|
|
may have double bandwidth than half-duplex.
|
||
|
|
|
||
|
|
You can configure manually from the possible options, listed from
|
||
|
|
best to worst:
|
||
|
|
1Gb full-duplex(6)
|
||
|
|
100Mb full-duplex(5)
|
||
|
|
100Mb half-duplex(4)
|
||
|
|
10Mb full-duplex(3)
|
||
|
|
10Mb half-duplex(2)
|
||
|
|
|
||
|
|
Set to autoNegotiation(1) to allow the two interfaces on the link
|
||
|
|
to exchange the capabilities and characteristics of the each side,
|
||
|
|
and select the best operating mode automatically when a cable is
|
||
|
|
plugged in."
|
||
|
|
::= { portCtrlEntry 4 }
|
||
|
|
|
||
|
|
portCtrlFlowControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disable(1),
|
||
|
|
symmetric(2)
|
||
|
|
-- asymmetric(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Flow control configuration.
|
||
|
|
|
||
|
|
Flow control is used to throttle the throughput rate of an
|
||
|
|
end station to avoid dropping packets during network
|
||
|
|
congestion. If flow control mode is not set and if there is
|
||
|
|
no packet buffer space available, the incoming packets are
|
||
|
|
discarded.
|
||
|
|
|
||
|
|
Symmetric Flow Control stops and restarts packet transmission
|
||
|
|
by transmitting and receiving pause frames. When a port's
|
||
|
|
free buffer space is almost empty, the device send out a Pause
|
||
|
|
frame to stop the remove node from sending more frames into
|
||
|
|
the switch. When congestion on the port is relieved, the device
|
||
|
|
send out a Pause frame with pause time equal to zero, making
|
||
|
|
the remove node resume transmission."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { portCtrlEntry 5 }
|
||
|
|
|
||
|
|
portCtrlPortDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..138))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The description of port."
|
||
|
|
::= { portCtrlEntry 6 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portStatusTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
portStatusTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive and statistics information about
|
||
|
|
each ports."
|
||
|
|
::= { portStatus 1 }
|
||
|
|
|
||
|
|
portStatusEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing statistics information of a port."
|
||
|
|
INDEX { portStatusIndex }
|
||
|
|
::= { portStatusTable 1 }
|
||
|
|
|
||
|
|
PortStatusEntry ::= SEQUENCE {
|
||
|
|
portStatusIndex Integer32,
|
||
|
|
portStatusType INTEGER,
|
||
|
|
portStatusLink INTEGER,
|
||
|
|
portStatusState INTEGER,
|
||
|
|
portStatusSpeedDuplex INTEGER,
|
||
|
|
portStatusFlowCtrl INTEGER,
|
||
|
|
sfpVender DisplayString,
|
||
|
|
sfpWavelength Integer32,
|
||
|
|
sfpDistance Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
portStatusIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of port statistic table."
|
||
|
|
::= { portStatusEntry 1 }
|
||
|
|
|
||
|
|
portStatusType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
hundredBaseTX(1),
|
||
|
|
thousandBaseT(2),
|
||
|
|
hundredBaseFX(3),
|
||
|
|
thousandBaseSX(4),
|
||
|
|
thousandBaseLX(5),
|
||
|
|
other(6),
|
||
|
|
notPresent(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicates the type of the port."
|
||
|
|
::= { portStatusEntry 2 }
|
||
|
|
|
||
|
|
portStatusLink OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
up(1),
|
||
|
|
down(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicate the link state of the port."
|
||
|
|
::= { portStatusEntry 3 }
|
||
|
|
|
||
|
|
portStatusState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicate the state of the port."
|
||
|
|
::= { portStatusEntry 4 }
|
||
|
|
|
||
|
|
portStatusSpeedDuplex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
autoNegotiation(1),
|
||
|
|
tenMbpsHalfDuplex(2),
|
||
|
|
tenMbpsFullDuplex(3),
|
||
|
|
hundredMbpsHalfDuplex(4),
|
||
|
|
hundredMbpsFullDuplex(5),
|
||
|
|
thousandMbpsFullDuplex(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicate the speed and duplex mode of the port."
|
||
|
|
::= { portStatusEntry 5 }
|
||
|
|
|
||
|
|
portStatusFlowCtrl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disable(1),
|
||
|
|
symmetric(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicate the flow control status of the port."
|
||
|
|
::= { portStatusEntry 6 }
|
||
|
|
|
||
|
|
sfpVender OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The vender name of the Small Form Pluggable (SFP) optical
|
||
|
|
transceiver module."
|
||
|
|
::= { portStatusEntry 7 }
|
||
|
|
|
||
|
|
sfpWavelength OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The wave length in nanometers (nm) of the Small Form
|
||
|
|
Pluggable (SFP) optical transceiver module."
|
||
|
|
::= { portStatusEntry 8 }
|
||
|
|
|
||
|
|
sfpDistance OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The maximum transimission distance in meters of the Small
|
||
|
|
Form Pluggable (SFP) optical transceiver module."
|
||
|
|
::= { portStatusEntry 9 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portSfpTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
portSfpTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortSfpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information about SFP"
|
||
|
|
::= { portStatus 2 }
|
||
|
|
|
||
|
|
portSfpEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortSfpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing SFP information of a port."
|
||
|
|
INDEX { portSfpIndex }
|
||
|
|
::= { portSfpTable 1 }
|
||
|
|
|
||
|
|
PortSfpEntry ::= SEQUENCE {
|
||
|
|
portSfpIndex Integer32,
|
||
|
|
portSfpEject INTEGER,
|
||
|
|
portSfpScan INTEGER,
|
||
|
|
portSfpDdmStatus INTEGER,
|
||
|
|
portSfpDdmTempatureCurrent DisplayString,
|
||
|
|
portSfpDdmTempatureRange DisplayString,
|
||
|
|
portSfpDdmTxPowerCurrent DisplayString,
|
||
|
|
portSfpDdmTxPowerRange DisplayString,
|
||
|
|
portSfpDdmRxPowerCurrent DisplayString,
|
||
|
|
portSfpDdmRxPowerRange DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
portSfpIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of port SFP table."
|
||
|
|
::= { portSfpEntry 1 }
|
||
|
|
|
||
|
|
portSfpEject OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Eject SFP"
|
||
|
|
::= { portSfpEntry 2 }
|
||
|
|
|
||
|
|
portSfpScan OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Scan SFP"
|
||
|
|
::= { portSfpEntry 3 }
|
||
|
|
|
||
|
|
portSfpDdmStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "(1)Enable SFP digital diagnostic and monitoring.
|
||
|
|
(2)Disable SFP digital diagnostic and monitoring."
|
||
|
|
::= { portSfpEntry 4 }
|
||
|
|
|
||
|
|
portSfpDdmTempatureCurrent OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..15))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The current SFP Tempature of port."
|
||
|
|
::= { portSfpEntry 5 }
|
||
|
|
|
||
|
|
portSfpDdmTempatureRange OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The range of SFP Tempature of port."
|
||
|
|
::= { portSfpEntry 6 }
|
||
|
|
|
||
|
|
portSfpDdmTxPowerCurrent OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..15))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The current SFP Transmitted Power of port."
|
||
|
|
::= { portSfpEntry 7 }
|
||
|
|
|
||
|
|
portSfpDdmTxPowerRange OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The range of SFP Transmitted Power of port."
|
||
|
|
::= { portSfpEntry 8 }
|
||
|
|
|
||
|
|
portSfpDdmRxPowerCurrent OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..15))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The current SFP Receiveed Power of port."
|
||
|
|
::= { portSfpEntry 9 }
|
||
|
|
|
||
|
|
portSfpDdmRxPowerRange OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..31))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The range of SFP Receiveed Power of port."
|
||
|
|
::= { portSfpEntry 10 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- rateLimiting
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
rateLimitingTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF RateLimitingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
port rate limiting. You can set up bandwidth rate and packet
|
||
|
|
limitation type for each ports.
|
||
|
|
|
||
|
|
Rate limiting is used to control the rate of traffic sent or
|
||
|
|
received on a network interface. For ingress rate limiting,
|
||
|
|
traffic that is less than or equal to the specified rate is
|
||
|
|
received, whereas traffic that exceeds the rate is dropped.
|
||
|
|
For egress rate limiting, traffic that is less than or equal
|
||
|
|
to the specified rate is sent, whereas traffic that exceeds
|
||
|
|
the rate is dropped."
|
||
|
|
::= { rateLimiting 1 }
|
||
|
|
|
||
|
|
rateLimitingEntry OBJECT-TYPE
|
||
|
|
SYNTAX RateLimitingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing information and configuration about
|
||
|
|
port rate limiting."
|
||
|
|
INDEX { rateLimitingPortNum }
|
||
|
|
::= { rateLimitingTable 1 }
|
||
|
|
|
||
|
|
RateLimitingEntry ::= SEQUENCE {
|
||
|
|
rateLimitingPortNum Integer32,
|
||
|
|
rateLimitingIngressLimitType INTEGER,
|
||
|
|
rateLimitingIngressRate Integer32,
|
||
|
|
rateLimitingEgressRate Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
rateLimitingPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port number."
|
||
|
|
::= { rateLimitingEntry 1 }
|
||
|
|
|
||
|
|
rateLimitingIngressLimitType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
all(1),
|
||
|
|
broadcastMulticastFloodedUnicast(2),
|
||
|
|
broadcastMulticast(3),
|
||
|
|
broadcastOnly(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The type of ingress packets to be filtered."
|
||
|
|
::= { rateLimitingEntry 2 }
|
||
|
|
|
||
|
|
rateLimitingIngressRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ingress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps
|
||
|
|
and zero means no limit."
|
||
|
|
::= { rateLimitingEntry 3 }
|
||
|
|
|
||
|
|
rateLimitingEgressRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Egress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps
|
||
|
|
and zero means no limit. Egress rate limiting has effect on
|
||
|
|
all types of packets, including unicast, multicast and
|
||
|
|
broadcast packets."
|
||
|
|
::= { rateLimitingEntry 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portTrunk
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
aggregatorSetting OBJECT IDENTIFIER ::= { portTrunk 1 }
|
||
|
|
aggregatorStatus OBJECT IDENTIFIER ::= { portTrunk 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portTrunkAggregatorSettingTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
portTrunkAggregatorSettingTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortTrunkAggregatorSettingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
of each trunk group in this system.
|
||
|
|
|
||
|
|
Link aggregation, or IEEE 802.3ad, is a method of combining
|
||
|
|
physical network links into a single logical link for
|
||
|
|
increased bandwidth. With Link aggregation we are able to
|
||
|
|
increase the capacity and availability of the communications
|
||
|
|
channel between devices (both switches and end stations)
|
||
|
|
using existing Fast Ethernet and Gigabit Ethernet technology.
|
||
|
|
Two or more Gigabit Ethernet connections are combined in
|
||
|
|
order to increase the bandwidth capability and to create
|
||
|
|
resilient and redundant links. A set of multiple parallel
|
||
|
|
physical links between two devices is grouped together to
|
||
|
|
form a single logical link.
|
||
|
|
|
||
|
|
Link Aggregation also provides load balancing where the
|
||
|
|
processing and communications activity is distributed across
|
||
|
|
the links in a trunk so that no single link is overwhelmed."
|
||
|
|
::= { aggregatorSetting 1 }
|
||
|
|
|
||
|
|
portTrunkAggregatorSettingEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortTrunkAggregatorSettingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling aggregator configuration."
|
||
|
|
INDEX { portTrunkPortIndex }
|
||
|
|
::= { portTrunkAggregatorSettingTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
PortTrunkAggregatorSettingEntry ::= SEQUENCE {
|
||
|
|
portTrunkPortIndex INTEGER,
|
||
|
|
portTrunkAggregatorGroupId INTEGER,
|
||
|
|
portTrunkAggregatorType INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
portTrunkPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port number."
|
||
|
|
::= { portTrunkAggregatorSettingEntry 1 }
|
||
|
|
|
||
|
|
portTrunkAggregatorGroupId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
trunkGroup1(1),
|
||
|
|
trunkGroup2(2),
|
||
|
|
trunkGroup3(3),
|
||
|
|
trunkGroup4(4),
|
||
|
|
trunkGroup5(5),
|
||
|
|
none(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Trunk group Id. Upto 8 ports can be aggregated into
|
||
|
|
a group and 5 groups can be configured in the device."
|
||
|
|
::= { portTrunkAggregatorSettingEntry 2 }
|
||
|
|
|
||
|
|
portTrunkAggregatorType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
static(1),
|
||
|
|
lacp(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Aggregator type. You can assign the aggregator staticly
|
||
|
|
by setting to static(1), or setting to lacp(2) to enable the
|
||
|
|
LACP protocol.
|
||
|
|
|
||
|
|
The Link Aggregation Control Protocol (LACP) is required for
|
||
|
|
dynamically exchanging configuration information between the
|
||
|
|
peer devices in order to automatically configure and maintain
|
||
|
|
link aggregation groups. The protocol is able to automatically
|
||
|
|
detect the presence and capabilities of other aggregation
|
||
|
|
capable devices, i.e. with LACP it is possible to specify which
|
||
|
|
links in a system can be aggregated.
|
||
|
|
|
||
|
|
This column has no effect if Group Id is set to none."
|
||
|
|
::= { portTrunkAggregatorSettingEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
portTrunkAggregatorSettingApply OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1), -- state, read-write
|
||
|
|
notactive(2) -- state, read-only
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "set active(1) to apply the configuration"
|
||
|
|
::= { aggregatorSetting 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portTrunkAggregatorStatusTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
portTrunkAggregatorStatusTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortTrunkAggregatorStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information about trunk groups in
|
||
|
|
the device."
|
||
|
|
::= { aggregatorStatus 1 }
|
||
|
|
|
||
|
|
portTrunkAggregatorStatusEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortTrunkAggregatorStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing information about current configuration
|
||
|
|
of trunk groups."
|
||
|
|
INDEX { portTrunkAggregatorGroupIndex }
|
||
|
|
::= { portTrunkAggregatorStatusTable 1 }
|
||
|
|
|
||
|
|
PortTrunkAggregatorStatusEntry ::= SEQUENCE {
|
||
|
|
portTrunkAggregatorGroupIndex INTEGER,
|
||
|
|
portTrunkAggregatorGroupType INTEGER,
|
||
|
|
portTrunkAggregatorGroupMember PortList,
|
||
|
|
portTrunkAggregatorIndividual PortList,
|
||
|
|
portTrunkAggregatorLinkDown PortList
|
||
|
|
}
|
||
|
|
|
||
|
|
portTrunkAggregatorGroupIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The trunk group identifier."
|
||
|
|
::= { portTrunkAggregatorStatusEntry 1 }
|
||
|
|
|
||
|
|
portTrunkAggregatorGroupType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
static(1),
|
||
|
|
lacp(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Aggregator type.
|
||
|
|
(1) The trunk group is LACP disabled and configured staticly
|
||
|
|
by administrator.
|
||
|
|
(2) The trunk group is LACP enabled. "
|
||
|
|
::= { portTrunkAggregatorStatusEntry 2 }
|
||
|
|
|
||
|
|
portTrunkAggregatorGroupMember OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The ports are aggregated with other ports."
|
||
|
|
::= { portTrunkAggregatorStatusEntry 3 }
|
||
|
|
|
||
|
|
portTrunkAggregatorIndividual OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A port is LACP enabled but not aggregated with other ports."
|
||
|
|
::= { portTrunkAggregatorStatusEntry 4 }
|
||
|
|
|
||
|
|
portTrunkAggregatorLinkDown OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The ports which are linked down."
|
||
|
|
::= { portTrunkAggregatorStatusEntry 5 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- networkRedundancy
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
-- superRing OBJECT IDENTIFIER ::= { networkRedundancy 1 }
|
||
|
|
-- rstp OBJECT IDENTIFIER ::= { networkRedundancy 2 }
|
||
|
|
-- bridgeInformation OBJECT IDENTIFIER ::= { networkRedundancy 3 }
|
||
|
|
redundantRing OBJECT IDENTIFIER ::= { networkRedundancy 4 }
|
||
|
|
stp OBJECT IDENTIFIER ::= { networkRedundancy 5 }
|
||
|
|
stpBridgeInformation OBJECT IDENTIFIER ::= { networkRedundancy 6 }
|
||
|
|
mstp OBJECT IDENTIFIER ::= { networkRedundancy 7 }
|
||
|
|
mstpBridgeInformation OBJECT IDENTIFIER ::= { networkRedundancy 8 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- superRing
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- redundantRingConfigTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
redundantRingConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF RedundantRingConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of configuration about redundancy protocol in the device."
|
||
|
|
::= { redundantRing 1 }
|
||
|
|
|
||
|
|
redundantRingConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX RedundantRingConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing information about current configuration
|
||
|
|
of rings."
|
||
|
|
INDEX { superRingConfigId }
|
||
|
|
::= { redundantRingConfigTable 1 }
|
||
|
|
|
||
|
|
RedundantRingConfigEntry ::= SEQUENCE {
|
||
|
|
superRingConfigId INTEGER,
|
||
|
|
superRingStatus RowStatus,
|
||
|
|
superRingName DisplayString,
|
||
|
|
superRingConfigVersion INTEGER,
|
||
|
|
superRingDevicePriority INTEGER,
|
||
|
|
superRingRingPort1 INTEGER,
|
||
|
|
superRingRingPort2 INTEGER,
|
||
|
|
superRingRingPort1PathCost INTEGER,
|
||
|
|
superRingRingPort2PathCost INTEGER,
|
||
|
|
superRingRapidDualHomingStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
superRingConfigId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(0..15)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ring Id."
|
||
|
|
::= { redundantRingConfigEntry 1 }
|
||
|
|
|
||
|
|
superRingName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Super Ring name."
|
||
|
|
::= { redundantRingConfigEntry 2 }
|
||
|
|
|
||
|
|
superRingConfigVersion OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
superRing(1),
|
||
|
|
rapidSuperRing(2),
|
||
|
|
anyRing(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Super Ring funtion version selection.
|
||
|
|
Super Ring: Backward compatible with legacy super ring mechanism.
|
||
|
|
Note: This model supports v1 non-Redundancy Management mode only.
|
||
|
|
Rapid Super Ring: New mechanism. The recovery time is less than 30ms.
|
||
|
|
Any Ring:
|
||
|
|
"
|
||
|
|
--DEFVAL { rapidSuperRing }
|
||
|
|
::= { redundantRingConfigEntry 3 }
|
||
|
|
|
||
|
|
superRingDevicePriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Super Ring device priority setting."
|
||
|
|
--DEFVAL { 128 }
|
||
|
|
::= { redundantRingConfigEntry 4 }
|
||
|
|
|
||
|
|
superRingRingPort1 OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "RingPort1 should not equal to RingRort2."
|
||
|
|
::= { redundantRingConfigEntry 5 }
|
||
|
|
|
||
|
|
superRingRingPort2 OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "RingPort2 should not equal to RingRort1."
|
||
|
|
::= { redundantRingConfigEntry 6 }
|
||
|
|
|
||
|
|
superRingRingPort1PathCost OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
--DEFVAL { 128 }
|
||
|
|
::= {redundantRingConfigEntry 7 }
|
||
|
|
|
||
|
|
superRingRingPort2PathCost OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
--DEFVAL { 128 }
|
||
|
|
::= { redundantRingConfigEntry 8 }
|
||
|
|
|
||
|
|
superRingRapidDualHomingStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Rapid Dual Homing funtion status.
|
||
|
|
Rapid Dual Homing is a redundancy protocol,
|
||
|
|
which is compatible with RSTP.
|
||
|
|
(1) Rapid Dual Homing function is enabled.
|
||
|
|
(2) Rapid Dual Homing function is disabled."
|
||
|
|
--DEFVAL { disable }
|
||
|
|
::= { redundantRingConfigEntry 9 }
|
||
|
|
|
||
|
|
superRingStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status of this ring."
|
||
|
|
::= { redundantRingConfigEntry 10 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- redundantRingStatusTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
redundantRingStatusTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF RedundantRingStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of status information about redundancy protocol in
|
||
|
|
the device."
|
||
|
|
::= { redundantRing 2 }
|
||
|
|
|
||
|
|
redundantRingStatusEntry OBJECT-TYPE
|
||
|
|
SYNTAX RedundantRingStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing information about current status
|
||
|
|
of rings."
|
||
|
|
INDEX { superRingStatusId }
|
||
|
|
::= { redundantRingStatusTable 1 }
|
||
|
|
|
||
|
|
RedundantRingStatusEntry ::= SEQUENCE {
|
||
|
|
superRingStatusId INTEGER,
|
||
|
|
superRingVersion INTEGER,
|
||
|
|
superRingDeviceRole INTEGER,
|
||
|
|
superRingRingPortList1 PortList,
|
||
|
|
superRingRingPortList2 PortList,
|
||
|
|
superRingRingStatus INTEGER,
|
||
|
|
superRingRmMac MacAddress,
|
||
|
|
superRingBlockedPort PortList,
|
||
|
|
superRingRoleTransitionCount Integer32,
|
||
|
|
superRingRingStateTransitionCount Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
superRingStatusId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(0..15)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Ring Id."
|
||
|
|
::= { redundantRingStatusEntry 1 }
|
||
|
|
|
||
|
|
superRingVersion OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
superRing(1),
|
||
|
|
rapidSuperRing(2),
|
||
|
|
anyRing(3),
|
||
|
|
notSupported(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Super Ring funtion version selection.
|
||
|
|
Super Ring: Backward compatible with legacy super ring mechanism.
|
||
|
|
Note: This model supports v1 non-Redundancy Management mode only.
|
||
|
|
Rapid Super Ring: New mechanism. The recovery time is less than 30ms.
|
||
|
|
Any Ring:
|
||
|
|
Not Supported:"
|
||
|
|
::= { redundantRingStatusEntry 2 }
|
||
|
|
|
||
|
|
superRingDeviceRole OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled(1),
|
||
|
|
rm(2),
|
||
|
|
non-RM(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Super Ring role status.
|
||
|
|
(1) disabled.
|
||
|
|
(2) Redundancy manager.
|
||
|
|
(3) Non redundancy manager."
|
||
|
|
::= { redundantRingStatusEntry 3 }
|
||
|
|
|
||
|
|
superRingRingPortList1 OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Port list for ring port1."
|
||
|
|
::= { redundantRingStatusEntry 4 }
|
||
|
|
|
||
|
|
superRingRingPortList2 OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Port list for ring port2."
|
||
|
|
::= { redundantRingStatusEntry 5 }
|
||
|
|
|
||
|
|
superRingRingStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled(1),
|
||
|
|
normal(2),
|
||
|
|
abnormal(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Super Ring ring status.
|
||
|
|
(1) Disabled - The ring on this device is disabled.
|
||
|
|
(1) Normal - Ring is complete.
|
||
|
|
(2) Abnormal - Ring is not complete."
|
||
|
|
::= { redundantRingStatusEntry 6 }
|
||
|
|
|
||
|
|
superRingRmMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "RM mac address."
|
||
|
|
::= { redundantRingStatusEntry 7 }
|
||
|
|
|
||
|
|
superRingBlockedPort OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The blocked ports in ring Normal state."
|
||
|
|
::= { redundantRingStatusEntry 8 }
|
||
|
|
|
||
|
|
superRingRoleTransitionCount OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { redundantRingStatusEntry 9 }
|
||
|
|
|
||
|
|
superRingRingStateTransitionCount OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { redundantRingStatusEntry 10 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- rstp
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- bridgeInformation
|
||
|
|
-- rstpRootBridgeInformationTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- stp
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
stpModeStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
stp(1),
|
||
|
|
rstp(2),
|
||
|
|
mstp(3),
|
||
|
|
disabled(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enable Spanning Tree protocol, Rapid Spanning Tree protocol,
|
||
|
|
or disable .
|
||
|
|
|
||
|
|
Rapid Spanning Tree Algorithm and Protocol (RSTP) provides a
|
||
|
|
loop free topology for any LAN or bridged network. RSTP is an
|
||
|
|
evolution of the Spanning Tree Protocol (STP), and was
|
||
|
|
introduced in the extension IEEE 802.1w, and provides for
|
||
|
|
faster spanning tree convergence after a topology change."
|
||
|
|
::= { stp 1 }
|
||
|
|
|
||
|
|
stpBridgeAddress OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Bridge Address."
|
||
|
|
::= { stp 2 }
|
||
|
|
|
||
|
|
stpBridgePriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 {
|
||
|
|
priority0(0),
|
||
|
|
priority4096(4096),
|
||
|
|
priority8192(8192),
|
||
|
|
priority12288(12288),
|
||
|
|
priority16384(16384),
|
||
|
|
priority20480(20480),
|
||
|
|
priority24576(24576),
|
||
|
|
priority28672(28672),
|
||
|
|
priority32768(32768),
|
||
|
|
priority36864(36864),
|
||
|
|
priority40960(40960),
|
||
|
|
priority45056(45056),
|
||
|
|
priority49152(49152),
|
||
|
|
priority53248(53248),
|
||
|
|
priority57344(57344),
|
||
|
|
priority61440(61440)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A value used to identify the root bridge. The bridge with
|
||
|
|
the lowest value has the highest priority and is selected
|
||
|
|
as the root. Enter a number 0 through 61440 in steps of
|
||
|
|
4096. If you change the value, you must restart RSTP.
|
||
|
|
This item can't be modified, if stpStatus was disabled."
|
||
|
|
::= { stp 3 }
|
||
|
|
|
||
|
|
stpMaxAge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The number of seconds a bridge waits without receiving
|
||
|
|
Spanning-Tree Protocol configuration messages before
|
||
|
|
attempting a reconfiguration. Enter a number 6 through 40.
|
||
|
|
Note: 2*(Forward Delay Time-1) should be greater than or
|
||
|
|
equal to the Max Age. The Max Age should be greater than
|
||
|
|
or equal to 2*(Hello Time + 1).
|
||
|
|
This item can't be modified, if stpStatus was disabled."
|
||
|
|
::= { stp 4 }
|
||
|
|
|
||
|
|
stpHelloTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The number of seconds between the transmission of
|
||
|
|
Spanning-Tree Protocol configuration messages.
|
||
|
|
Enter a number 1 through 10
|
||
|
|
Note: 2*(Forward Delay Time-1) should be greater than or
|
||
|
|
equal to the Max Age. The Max Age should be greater
|
||
|
|
than or equal to 2*(Hello Time + 1).
|
||
|
|
This item can't be modified, if stpStatus was disabled."
|
||
|
|
::= { stp 5 }
|
||
|
|
|
||
|
|
stpForwardDelayTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The number of seconds a port waits before changing
|
||
|
|
from its Spanning-Tree Protocol learning and listening
|
||
|
|
states to the forwarding state. Enter a number 4 through 30.
|
||
|
|
Note:2*(Forward Delay Time-1) should be greater than or
|
||
|
|
equal to the Max Age. The Max Age should be greater than
|
||
|
|
or equal to 2*(Hello Time + 1).
|
||
|
|
This item can't be modified, if stpStatus was disabled."
|
||
|
|
::= { stp 6 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- stpPerPortCfgTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
stpPerPortCfgTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF StpPerPortCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
STP on each port."
|
||
|
|
::= { stp 7 }
|
||
|
|
|
||
|
|
stpPerPortCfgEntry OBJECT-TYPE
|
||
|
|
SYNTAX StpPerPortCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information configuring STP on a port."
|
||
|
|
INDEX { stpPerPortCfgPortNum }
|
||
|
|
::= { stpPerPortCfgTable 1 }
|
||
|
|
|
||
|
|
StpPerPortCfgEntry ::= SEQUENCE {
|
||
|
|
stpPerPortCfgPortNum Integer32,
|
||
|
|
stpPerPortCfgStpState INTEGER,
|
||
|
|
stpPerPortCfgPathCost Integer32,
|
||
|
|
stpPerPortCfgPriority Integer32,
|
||
|
|
stpPerPortCfgLinkType INTEGER,
|
||
|
|
stpPerPortCfgEdgePort INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
stpPerPortCfgPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port number."
|
||
|
|
::= { stpPerPortCfgEntry 1 }
|
||
|
|
|
||
|
|
stpPerPortCfgStpState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enable/Disable STP/RSTP/MSTP at this port. Disable STP state
|
||
|
|
when connecting a device in order to avoid STP waiting periods."
|
||
|
|
::= { stpPerPortCfgEntry 2 }
|
||
|
|
|
||
|
|
stpPerPortCfgPathCost OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The cost of the path to the other bridge from this
|
||
|
|
transmitting bridge at the specified port. Enter a number from
|
||
|
|
1 through 200000000.
|
||
|
|
(0 will auto set path cost to standard recommended value)"
|
||
|
|
::= { stpPerPortCfgEntry 3 }
|
||
|
|
|
||
|
|
stpPerPortCfgPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 {
|
||
|
|
priority0(0),
|
||
|
|
priority16(16),
|
||
|
|
priority32(32),
|
||
|
|
priority48(48),
|
||
|
|
priority64(64),
|
||
|
|
priority80(80),
|
||
|
|
priority96(96),
|
||
|
|
priority112(112),
|
||
|
|
priority128(128),
|
||
|
|
priority144(144),
|
||
|
|
priority160(160),
|
||
|
|
priority176(176),
|
||
|
|
priority192(192),
|
||
|
|
priority208(208),
|
||
|
|
priority224(224),
|
||
|
|
priority240(240)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Decide which port should be blocked by priority in LAN. Enter
|
||
|
|
a number from 0 through 240 in steps of 16."
|
||
|
|
::= { stpPerPortCfgEntry 4 }
|
||
|
|
|
||
|
|
stpPerPortCfgLinkType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
point2Point(2),
|
||
|
|
shared(3),
|
||
|
|
notSupport(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
||
|
|
possible within RSTP are dependent upon whether
|
||
|
|
the Port concerned can only be connected to
|
||
|
|
exactly one other Bridge(ie., it is served by a
|
||
|
|
point-to-point LAN segment), or can be connected
|
||
|
|
to two or more Bridges(i.e., it is served by a
|
||
|
|
shared medium LAN segment).
|
||
|
|
The adminPointToPointMAC allow the p2p status
|
||
|
|
of the link to be manipulated adminitratively."
|
||
|
|
::= { stpPerPortCfgEntry 5 }
|
||
|
|
|
||
|
|
stpPerPortCfgEdgePort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true(1),
|
||
|
|
false(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Present in implementations that support the
|
||
|
|
identification of edge ports. All ports
|
||
|
|
directly connected to end stations cannot
|
||
|
|
create bridging loops in the network and can
|
||
|
|
thus directly transition to forwarding,
|
||
|
|
skipping the listening and learning stages."
|
||
|
|
::= { stpPerPortCfgEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- stpBridgeInformation
|
||
|
|
-- stpRootInformationTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
stpRootInformationTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF StpRootInformationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information about root bridge
|
||
|
|
of rapid spanning tree in this system."
|
||
|
|
::= { stpBridgeInformation 1 }
|
||
|
|
|
||
|
|
stpRootInformationEntry OBJECT-TYPE
|
||
|
|
SYNTAX StpRootInformationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing information
|
||
|
|
about root bridge information of the STP."
|
||
|
|
INDEX { stpRootInformationIndex }
|
||
|
|
::= { stpRootInformationTable 1 }
|
||
|
|
|
||
|
|
StpRootInformationEntry ::= SEQUENCE {
|
||
|
|
stpRootInformationIndex Integer32,
|
||
|
|
stpRootInformationRootAddress DisplayString,
|
||
|
|
stpRootInformationRootPriority Integer32,
|
||
|
|
stpRootInformationRootPort DisplayString,
|
||
|
|
stpRootInformationRootPathCost Integer32,
|
||
|
|
stpRootInformationMaxAge Integer32,
|
||
|
|
stpRootInformationHelloTime Integer32,
|
||
|
|
stpRootInformationForwardDelay Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
stpRootInformationIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of root bridge information table."
|
||
|
|
::= { stpRootInformationEntry 1 }
|
||
|
|
|
||
|
|
stpRootInformationRootAddress OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..255))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Address."
|
||
|
|
::= { stpRootInformationEntry 2 }
|
||
|
|
|
||
|
|
stpRootInformationRootPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Priority."
|
||
|
|
::= { stpRootInformationEntry 3 }
|
||
|
|
|
||
|
|
stpRootInformationRootPort OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..80))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Port."
|
||
|
|
::= { stpRootInformationEntry 4 }
|
||
|
|
|
||
|
|
stpRootInformationRootPathCost OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Path Cost."
|
||
|
|
::= { stpRootInformationEntry 5 }
|
||
|
|
|
||
|
|
stpRootInformationMaxAge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Max Age."
|
||
|
|
::= { stpRootInformationEntry 6 }
|
||
|
|
|
||
|
|
stpRootInformationHelloTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Hello Time."
|
||
|
|
::= { stpRootInformationEntry 7 }
|
||
|
|
|
||
|
|
stpRootInformationForwardDelay OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Forward Delay Time."
|
||
|
|
::= { stpRootInformationEntry 8 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- stpPerPortInfoTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
stpPerPortInfoTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF StpPerPortInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
rapid spanning tree (Per port)."
|
||
|
|
::= { stpBridgeInformation 2 }
|
||
|
|
|
||
|
|
stpPerPortInfoEntry OBJECT-TYPE
|
||
|
|
SYNTAX StpPerPortInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing inforamtion
|
||
|
|
about STP (Per port)."
|
||
|
|
INDEX { stpPerPortInfoPortNum }
|
||
|
|
::= { stpPerPortInfoTable 1 }
|
||
|
|
|
||
|
|
StpPerPortInfoEntry ::= SEQUENCE {
|
||
|
|
stpPerPortInfoPortNum Integer32,
|
||
|
|
stpPerPortInfoRole INTEGER,
|
||
|
|
stpPerPortInfoState INTEGER,
|
||
|
|
stpPerPortInfoPathCost Integer32,
|
||
|
|
stpPerPortInfoPriority Integer32,
|
||
|
|
stpPerPortInfoLinkType INTEGER,
|
||
|
|
stpPerPortInfoEdgePort INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
stpPerPortInfoPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Port number."
|
||
|
|
::= { stpPerPortInfoEntry 1 }
|
||
|
|
|
||
|
|
stpPerPortInfoRole OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
root(1),
|
||
|
|
alternated(2),
|
||
|
|
designated(3),
|
||
|
|
backup(4),
|
||
|
|
disabled(5),
|
||
|
|
nonStp(6),
|
||
|
|
unknown(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Descriptive information about RSTP switch port roles:
|
||
|
|
root(1) A forwarding port that has been elected for
|
||
|
|
the spanning-tree topology.
|
||
|
|
alternate(2) An alternate path to the root bridge. This
|
||
|
|
path is different than using the root port.
|
||
|
|
designated(3) A forwarding port for every LAN segment.
|
||
|
|
backup(4) A backup/redundant path to a segment where
|
||
|
|
another switch port already connects.
|
||
|
|
disabled(5) RSTP is disabled on this port."
|
||
|
|
|
||
|
|
::= { stpPerPortInfoEntry 2 }
|
||
|
|
|
||
|
|
stpPerPortInfoState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled(1),
|
||
|
|
learning(2),
|
||
|
|
forwarding(3),
|
||
|
|
blocking(4),
|
||
|
|
unknown(5),
|
||
|
|
nonStp(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION " "
|
||
|
|
::= { stpPerPortInfoEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
stpPerPortInfoPathCost OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The cost of the path to the other bridge from
|
||
|
|
this transmitting bridge at the specified port.
|
||
|
|
Enter a number 1 through 200000000."
|
||
|
|
::= { stpPerPortInfoEntry 4 }
|
||
|
|
|
||
|
|
stpPerPortInfoPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Decide which port should be blocked by priority
|
||
|
|
in LAN. Enter a number 0 through 240 in steps of
|
||
|
|
16."
|
||
|
|
::= { stpPerPortInfoEntry 5 }
|
||
|
|
|
||
|
|
stpPerPortInfoLinkType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
point2Point(2),
|
||
|
|
shared(3),
|
||
|
|
notSupport(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
||
|
|
possible within RSTP are dependent upon whether
|
||
|
|
the Port concerned can only be connected to
|
||
|
|
exactly one other Bridge(ie., it is served by a
|
||
|
|
point-to-point LAN segment), or can be connected
|
||
|
|
to two or more Bridges(i.e., it is served by a
|
||
|
|
shared medium LAN segment).
|
||
|
|
|
||
|
|
The adminPointToPointMAC allow the p2p status
|
||
|
|
of the link to be manipulated adminitratively.
|
||
|
|
|
||
|
|
STP does not support this function."
|
||
|
|
::= { stpPerPortInfoEntry 6 }
|
||
|
|
|
||
|
|
stpPerPortInfoEdgePort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true(1),
|
||
|
|
false(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Present in implementations that support the
|
||
|
|
identification of edge ports. All ports
|
||
|
|
directly connected to end stations cannot
|
||
|
|
create bridging loops in the network and can
|
||
|
|
thus directly transition to forwarding,
|
||
|
|
skipping the listening and learning stages."
|
||
|
|
::= { stpPerPortInfoEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
-- mstp
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
mstpRegionName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MSTP region name."
|
||
|
|
::= { mstp 1 }
|
||
|
|
|
||
|
|
mstpRegionRevision OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MSTP region revision."
|
||
|
|
::= { mstp 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- mstpPerInstCfgTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
mstpPerInstCfgTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MstpPerInstCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
STP on each port."
|
||
|
|
::= { mstp 3 }
|
||
|
|
|
||
|
|
mstpPerInstCfgEntry OBJECT-TYPE
|
||
|
|
SYNTAX MstpPerInstCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information configuring MSTP on a instance."
|
||
|
|
INDEX { mstpPerInstCfgInstanceID }
|
||
|
|
::= { mstpPerInstCfgTable 1 }
|
||
|
|
|
||
|
|
MstpPerInstCfgEntry ::= SEQUENCE {
|
||
|
|
mstpPerInstCfgInstanceID Integer32,
|
||
|
|
mstpPerInstCfgVlanGroup DisplayString,
|
||
|
|
mstpPerInstCfgInstancePriority Integer32,
|
||
|
|
mstpPerInstCfgStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
mstpPerInstCfgInstanceID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The instance ID."
|
||
|
|
::= { mstpPerInstCfgEntry 1 }
|
||
|
|
|
||
|
|
mstpPerInstCfgVlanGroup OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "VLAN group of instance."
|
||
|
|
::= { mstpPerInstCfgEntry 2 }
|
||
|
|
|
||
|
|
mstpPerInstCfgInstancePriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 {
|
||
|
|
priority0(0),
|
||
|
|
priority4096(4096),
|
||
|
|
priority8192(8192),
|
||
|
|
priority12288(12288),
|
||
|
|
priority16384(16384),
|
||
|
|
priority20480(20480),
|
||
|
|
priority24576(24576),
|
||
|
|
priority28672(28672),
|
||
|
|
priority32768(32768),
|
||
|
|
priority36864(36864),
|
||
|
|
priority40960(40960),
|
||
|
|
priority45056(45056),
|
||
|
|
priority49152(49152),
|
||
|
|
priority53248(53248),
|
||
|
|
priority57344(57344),
|
||
|
|
priority61440(61440)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A value used to identify the instance root. The instance with
|
||
|
|
the lowest value has the highest priority and is selected
|
||
|
|
as the root. Enter a number 0 through 61440 in steps of
|
||
|
|
4096."
|
||
|
|
::= { mstpPerInstCfgEntry 3 }
|
||
|
|
|
||
|
|
mstpPerInstCfgStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Status of this Instance."
|
||
|
|
::= { mstpPerInstCfgEntry 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- mstpPerPortCfgTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
mstpPerPortCfgTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MstpPerPortCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
MSTP on each port."
|
||
|
|
::= { mstp 4 }
|
||
|
|
|
||
|
|
mstpPerPortCfgEntry OBJECT-TYPE
|
||
|
|
SYNTAX MstpPerPortCfgEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information configuring MSTP on a port."
|
||
|
|
INDEX { mstpPerPortCfgIndex }
|
||
|
|
::= { mstpPerPortCfgTable 1 }
|
||
|
|
|
||
|
|
MstpPerPortCfgEntry ::= SEQUENCE {
|
||
|
|
mstpPerPortCfgIndex Integer32,
|
||
|
|
mstpPerPortCfgInstanceID Integer32,
|
||
|
|
mstpPerPortCfgPortNum Integer32,
|
||
|
|
mstpPerPortCfgPathCost Integer32,
|
||
|
|
mstpPerPortCfgPriority Integer32,
|
||
|
|
mstpPerPortCfgLinkType INTEGER,
|
||
|
|
mstpPerPortCfgEdgePort INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
mstpPerPortCfgIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The index of MstpPerPortCfgEntry."
|
||
|
|
::= { mstpPerPortCfgEntry 1 }
|
||
|
|
|
||
|
|
mstpPerPortCfgInstanceID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The instance ID."
|
||
|
|
::= { mstpPerPortCfgEntry 2 }
|
||
|
|
|
||
|
|
mstpPerPortCfgPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port number."
|
||
|
|
::= { mstpPerPortCfgEntry 3 }
|
||
|
|
|
||
|
|
mstpPerPortCfgPathCost OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The cost of the path to the other bridge from this
|
||
|
|
transmitting bridge at the specified port. Enter a number from
|
||
|
|
1 through 200000000.
|
||
|
|
(0 will auto set path cost to standard recommended value)"
|
||
|
|
::= { mstpPerPortCfgEntry 4 }
|
||
|
|
|
||
|
|
mstpPerPortCfgPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 {
|
||
|
|
priority0(0),
|
||
|
|
priority16(16),
|
||
|
|
priority32(32),
|
||
|
|
priority48(48),
|
||
|
|
priority64(64),
|
||
|
|
priority80(80),
|
||
|
|
priority96(96),
|
||
|
|
priority112(112),
|
||
|
|
priority128(128),
|
||
|
|
priority144(144),
|
||
|
|
priority160(160),
|
||
|
|
priority176(176),
|
||
|
|
priority192(192),
|
||
|
|
priority208(208),
|
||
|
|
priority224(224),
|
||
|
|
priority240(240)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Decide which port should be blocked by priority in LAN. Enter
|
||
|
|
a number from 0 through 240 in steps of 16."
|
||
|
|
::= { mstpPerPortCfgEntry 5 }
|
||
|
|
|
||
|
|
mstpPerPortCfgLinkType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
point2Point(2),
|
||
|
|
shared(3),
|
||
|
|
notSupport(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
||
|
|
possible within RSTP are dependent upon whether
|
||
|
|
the Port concerned can only be connected to
|
||
|
|
exactly one other Bridge(ie., it is served by a
|
||
|
|
point-to-point LAN segment), or can be connected
|
||
|
|
to two or more Bridges(i.e., it is served by a
|
||
|
|
shared medium LAN segment).
|
||
|
|
The adminPointToPointMAC allow the p2p status
|
||
|
|
of the link to be manipulated adminitratively."
|
||
|
|
::= { mstpPerPortCfgEntry 6 }
|
||
|
|
|
||
|
|
mstpPerPortCfgEdgePort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true(1),
|
||
|
|
false(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Present in implementations that support the
|
||
|
|
identification of edge ports. All ports
|
||
|
|
directly connected to end stations cannot
|
||
|
|
create bridging loops in the network and can
|
||
|
|
thus directly transition to forwarding,
|
||
|
|
skipping the listening and learning stages."
|
||
|
|
::= { mstpPerPortCfgEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- mstpBridgeInformation
|
||
|
|
-- mstpRootInformationTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
mstpRootInformationTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MstpRootInformationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information about root bridge
|
||
|
|
of rapid spanning tree in this system."
|
||
|
|
::= { mstpBridgeInformation 1 }
|
||
|
|
|
||
|
|
mstpRootInformationEntry OBJECT-TYPE
|
||
|
|
SYNTAX MstpRootInformationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing information
|
||
|
|
about root bridge information of the MSTP."
|
||
|
|
INDEX { mstpRootInformationInstanceID }
|
||
|
|
::= { mstpRootInformationTable 1 }
|
||
|
|
|
||
|
|
MstpRootInformationEntry ::= SEQUENCE {
|
||
|
|
-- mstpRootInformationIndex Integer32,
|
||
|
|
mstpRootInformationInstanceID Integer32,
|
||
|
|
mstpRootInformationRootAddress DisplayString,
|
||
|
|
mstpRootInformationRootPriority Integer32,
|
||
|
|
mstpRootInformationRootPort DisplayString,
|
||
|
|
mstpRootInformationRootPathCost Integer32,
|
||
|
|
mstpRootInformationMaxAge Integer32,
|
||
|
|
mstpRootInformationHelloTime Integer32,
|
||
|
|
mstpRootInformationForwardDelay Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
--mstpRootInformationIndex OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Index of root bridge information table."
|
||
|
|
-- ::= { mstpRootInformationEntry 1 }
|
||
|
|
|
||
|
|
mstpRootInformationInstanceID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The instance ID."
|
||
|
|
::= { mstpRootInformationEntry 1 }
|
||
|
|
|
||
|
|
mstpRootInformationRootAddress OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..255))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Address."
|
||
|
|
::= { mstpRootInformationEntry 2 }
|
||
|
|
|
||
|
|
mstpRootInformationRootPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Priority."
|
||
|
|
::= { mstpRootInformationEntry 3 }
|
||
|
|
|
||
|
|
mstpRootInformationRootPort OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..80))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Port."
|
||
|
|
::= { mstpRootInformationEntry 4 }
|
||
|
|
|
||
|
|
mstpRootInformationRootPathCost OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Root Path Cost."
|
||
|
|
::= { mstpRootInformationEntry 5 }
|
||
|
|
|
||
|
|
mstpRootInformationMaxAge OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Max Age."
|
||
|
|
::= { mstpRootInformationEntry 6 }
|
||
|
|
|
||
|
|
mstpRootInformationHelloTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Hello Time."
|
||
|
|
::= { mstpRootInformationEntry 7 }
|
||
|
|
|
||
|
|
mstpRootInformationForwardDelay OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Forward Delay Time."
|
||
|
|
::= { mstpRootInformationEntry 8 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- mstpPerPortInfoTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
mstpPerPortInfoTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MstpPerPortInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
rapid spanning tree (Per port)."
|
||
|
|
::= { mstpBridgeInformation 2 }
|
||
|
|
|
||
|
|
mstpPerPortInfoEntry OBJECT-TYPE
|
||
|
|
SYNTAX MstpPerPortInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing information
|
||
|
|
about MSTP (Per port)."
|
||
|
|
INDEX { mstpPerPortInfoIndex }
|
||
|
|
::= { mstpPerPortInfoTable 1 }
|
||
|
|
|
||
|
|
MstpPerPortInfoEntry ::= SEQUENCE {
|
||
|
|
mstpPerPortInfoIndex Integer32,
|
||
|
|
mstpPerPortInfoInstanceID Integer32,
|
||
|
|
mstpPerPortInfoPortNum Integer32,
|
||
|
|
mstpPerPortInfoRole INTEGER,
|
||
|
|
mstpPerPortInfoState INTEGER,
|
||
|
|
mstpPerPortInfoPathCost Integer32,
|
||
|
|
mstpPerPortInfoPriority Integer32,
|
||
|
|
mstpPerPortInfoLinkType INTEGER,
|
||
|
|
mstpPerPortInfoEdgePort INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
mstpPerPortInfoIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The index of MstpPerPortInfoEntry."
|
||
|
|
::= { mstpPerPortInfoEntry 1 }
|
||
|
|
|
||
|
|
mstpPerPortInfoInstanceID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The instance ID."
|
||
|
|
::= { mstpPerPortInfoEntry 2 }
|
||
|
|
|
||
|
|
mstpPerPortInfoPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Port number."
|
||
|
|
::= { mstpPerPortInfoEntry 3 }
|
||
|
|
|
||
|
|
mstpPerPortInfoRole OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
root(1),
|
||
|
|
alternate(2),
|
||
|
|
designated(3),
|
||
|
|
backup(4),
|
||
|
|
master(5),
|
||
|
|
disabled(6),
|
||
|
|
boundary(7),
|
||
|
|
unknown(8)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Descriptive information about MSTP switch port roles:
|
||
|
|
disabled(1) MSTP is disabled on this port.
|
||
|
|
root(2) A forwarding port that has been elected for
|
||
|
|
the spanning-tree topology.
|
||
|
|
designated(3) A forwarding port for every LAN segment.
|
||
|
|
alternate(4) An alternate path to the root bridge. This
|
||
|
|
path is different than using the root port.
|
||
|
|
backup(5) A backup/redundant path to a segment where
|
||
|
|
another switch port already connects."
|
||
|
|
::= { mstpPerPortInfoEntry 4 }
|
||
|
|
|
||
|
|
mstpPerPortInfoState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled(1),
|
||
|
|
listening(2),
|
||
|
|
learning(3),
|
||
|
|
forwarding(4),
|
||
|
|
blocking(5),
|
||
|
|
unknown(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION " "
|
||
|
|
::= { mstpPerPortInfoEntry 5 }
|
||
|
|
|
||
|
|
mstpPerPortInfoPathCost OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The cost of the path to the other bridge from
|
||
|
|
this transmitting bridge at the specified port.
|
||
|
|
Enter a number 1 through 200000000."
|
||
|
|
::= { mstpPerPortInfoEntry 6 }
|
||
|
|
|
||
|
|
mstpPerPortInfoPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Decide which port should be blocked by priority
|
||
|
|
in LAN. Enter a number 0 through 240 in steps of
|
||
|
|
16."
|
||
|
|
::= { mstpPerPortInfoEntry 7 }
|
||
|
|
|
||
|
|
mstpPerPortInfoLinkType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
p2p-bound-stp(1),
|
||
|
|
p2p-bound-rstp(2),
|
||
|
|
p2p-bound-mstp(3),
|
||
|
|
p2p-internal-mstp(4),
|
||
|
|
shared-bound-stp(5),
|
||
|
|
shared-bound-rstp(6),
|
||
|
|
shared-bound-mstp(7),
|
||
|
|
shared-internal-mstp(8)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Some of the rapid state transactions that are
|
||
|
|
possible within MSTP are dependent upon whether
|
||
|
|
the Port concerned can only be connected to
|
||
|
|
exactly one other Bridge(ie., it is served by a
|
||
|
|
point-to-point LAN segment), or can be connected
|
||
|
|
to two or more Bridges(i.e., it is served by a
|
||
|
|
shared medium LAN segment).
|
||
|
|
|
||
|
|
The adminPointToPointMAC allow the p2p status
|
||
|
|
of the link to be manipulated adminitratively."
|
||
|
|
::= { mstpPerPortInfoEntry 8 }
|
||
|
|
|
||
|
|
mstpPerPortInfoEdgePort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true(1),
|
||
|
|
false(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Present in implementations that support the
|
||
|
|
identification of edge ports. All ports
|
||
|
|
directly connected to end stations cannot
|
||
|
|
create bridging loops in the network and can
|
||
|
|
thus directly transition to forwarding,
|
||
|
|
skipping the listening and learning stages."
|
||
|
|
::= { mstpPerPortInfoEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
-- vlan
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
vlanManagementVlan OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The VLAN from which managemnet traffic can access the device.
|
||
|
|
By default, VLAN 1 is management VLAN."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { vlan 1 }
|
||
|
|
|
||
|
|
-- vlanStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- disabled(1),
|
||
|
|
-- ieee8021qVlan(2),
|
||
|
|
-- portBasedVlan(3)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION ""
|
||
|
|
-- ::= { vlan 2 }
|
||
|
|
|
||
|
|
ieee8021qVlan OBJECT IDENTIFIER ::= { vlan 2 }
|
||
|
|
-- portBasedVlan OBJECT IDENTIFIER ::= { vlan 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Vlan Port Configuration
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dot1qPortVlanTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1qPortVlanEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing per port control and status information
|
||
|
|
for IEEE802.1Q VLAN configuration in the device."
|
||
|
|
::= { ieee8021qVlan 1 }
|
||
|
|
|
||
|
|
dot1qPortVlanEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1qPortVlanEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling IEEE802.1Q VLAN configuration for
|
||
|
|
a port on the device."
|
||
|
|
INDEX { dot1qPortIndex }
|
||
|
|
::= { dot1qPortVlanTable 1 }
|
||
|
|
|
||
|
|
Dot1qPortVlanEntry ::= SEQUENCE {
|
||
|
|
dot1qPortIndex INTEGER,
|
||
|
|
dot1qPvid INTEGER,
|
||
|
|
dot1qPortAcceptableFrameTypes INTEGER,
|
||
|
|
dot1qPortIngressFiltering INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1qPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..10)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port identifier."
|
||
|
|
::= { dot1qPortVlanEntry 1 }
|
||
|
|
|
||
|
|
dot1qPvid OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..4094)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The default Port VID, the VLAN ID assigned to an untagged
|
||
|
|
frame or a Priority-Tagged frame received on the port."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1"
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { dot1qPortVlanEntry 2 }
|
||
|
|
|
||
|
|
dot1qPortAcceptableFrameTypes OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
admitAll(1),
|
||
|
|
admitOnlyVlanTagged(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When admitOnlyVlanTagged(2) the device will discard untagged
|
||
|
|
frames or Priority-Tagged only frames received on this port.
|
||
|
|
When admitAll(1), untagged frames or Priority-Tagged only
|
||
|
|
frames received on this port will be accepted and assigned
|
||
|
|
the PVID for this frame. This control does not affect
|
||
|
|
VLAN independent BPDU frames, such as SuperRing, STP, GVRP
|
||
|
|
and LACP. It does affect VLAN dependent BPDU frames, such
|
||
|
|
as GMRP."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.3"
|
||
|
|
DEFVAL { admitAll }
|
||
|
|
::= { dot1qPortVlanEntry 3 }
|
||
|
|
|
||
|
|
dot1qPortIngressFiltering OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
true(1),
|
||
|
|
false(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "When true(1) the device will discard incoming frames whose
|
||
|
|
VLAN classification do not include this port in its Member set.
|
||
|
|
When false(2), the port will accept all incoming frames
|
||
|
|
regardless its VLAN classification.
|
||
|
|
This control does not affect VLAN independent BPDU frames,
|
||
|
|
such as SuperRing, STP, GVRP and LACP. It does affect VLAN
|
||
|
|
dependent BPDU frames, such as GMRP."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.4"
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { dot1qPortVlanEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Static VLAN Database
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dot1qVlanStaticTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1qVlanStaticEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing configuration information for each VLAN
|
||
|
|
configured into the device by management. All entries are
|
||
|
|
permanent and will be restored after the device is reset.
|
||
|
|
Upto 64 VLANs can be configured in this device.
|
||
|
|
|
||
|
|
IEEE 802.1Q Virtual LANs (VLANs) allow a single physical LAN
|
||
|
|
to be partitioned into several smaller logical LANs. VLANs
|
||
|
|
limit the broadcast domain, improve security and performance
|
||
|
|
and are ideal for separating systems or departments from each
|
||
|
|
other."
|
||
|
|
-- The maximun number of VLAN supported by this device is 64."
|
||
|
|
::= { ieee8021qVlan 2 }
|
||
|
|
|
||
|
|
dot1qVlanStaticEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1qVlanStaticEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Static information of a VLAN configured into the device by
|
||
|
|
management."
|
||
|
|
INDEX { dot1qVlanIndex }
|
||
|
|
::= { dot1qVlanStaticTable 1 }
|
||
|
|
|
||
|
|
Dot1qVlanStaticEntry ::= SEQUENCE {
|
||
|
|
dot1qVlanIndex INTEGER,
|
||
|
|
dot1qVlanStaticName DisplayString,
|
||
|
|
dot1qVlanStaticEgressPorts PortList,
|
||
|
|
dot1qVlanStaticUntaggedPorts PortList,
|
||
|
|
dot1qVlanStaticTaggedPorts PortList,
|
||
|
|
dot1qVlanStaticRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1qVlanIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..4094)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The VLAN Identifier (VID) refering to this VLAN. The valid
|
||
|
|
range is from 1 to 4094."
|
||
|
|
::= { dot1qVlanStaticEntry 1 }
|
||
|
|
|
||
|
|
dot1qVlanStaticName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..12))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An administratively assigned string, which is used to identify
|
||
|
|
the VLAN."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
||
|
|
::= { dot1qVlanStaticEntry 2 }
|
||
|
|
|
||
|
|
dot1qVlanStaticEgressPorts OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The set of ports which are permanently configured to
|
||
|
|
transmitting traffic for this VLAN as either tagged or
|
||
|
|
untagged frames.
|
||
|
|
|
||
|
|
Each octet within this value specifies a set of eight
|
||
|
|
ports, with the first octet specifying ports 1 through
|
||
|
|
8, the second octet specifying ports 9 through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents
|
||
|
|
the lowest numbered port, and the least significant bit
|
||
|
|
represents the highest numbered port. Thus, each port
|
||
|
|
of the bridge is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1'
|
||
|
|
then that port is included in the set of ports; the port
|
||
|
|
is not included if its bit has a value of '0'.
|
||
|
|
|
||
|
|
Changes to this object affect the per-port per-VLAN
|
||
|
|
Registrar control for Registration Fixed for the
|
||
|
|
relevant GVRP state machine on each port.
|
||
|
|
|
||
|
|
A port may not be added in this set if it is already a
|
||
|
|
member of the set of ports in dot1qVlanForbiddenEgressPorts.
|
||
|
|
|
||
|
|
The default value of this object is a string of zeros,
|
||
|
|
indicating not fixed."
|
||
|
|
::= { dot1qVlanStaticEntry 3 }
|
||
|
|
|
||
|
|
dot1qVlanStaticUntaggedPorts OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The set of ports which are permanently configured to
|
||
|
|
transmitting traffic for this VLAN as untagged frames.
|
||
|
|
|
||
|
|
Each octet within this value specifies a set of eight
|
||
|
|
ports, with the first octet specifying ports 1 through
|
||
|
|
8, the second octet specifying ports 9 through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents
|
||
|
|
the lowest numbered port, and the least significant bit
|
||
|
|
represents the highest numbered port. Thus, each port
|
||
|
|
of the bridge is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1'
|
||
|
|
then that port is included in the set of ports; the port
|
||
|
|
is not included if its bit has a value of '0'.
|
||
|
|
|
||
|
|
Changes to this object affect the per-port per-VLAN
|
||
|
|
Registrar control for Registration Fixed for the
|
||
|
|
relevant GVRP state machine on each port.
|
||
|
|
|
||
|
|
The default value of this object for the default VLAN is a
|
||
|
|
portlist including all ports. There is no specified default
|
||
|
|
for other VLANs."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
||
|
|
::= { dot1qVlanStaticEntry 4 }
|
||
|
|
|
||
|
|
dot1qVlanStaticTaggedPorts OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The set of ports which are permanently configured to
|
||
|
|
transmitting traffic for this VLAN as tagged frames.
|
||
|
|
|
||
|
|
Each octet within this value specifies a set of eight
|
||
|
|
ports, with the first octet specifying ports 1 through
|
||
|
|
8, the second octet specifying ports 9 through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents
|
||
|
|
the lowest numbered port, and the least significant bit
|
||
|
|
represents the highest numbered port. Thus, each port
|
||
|
|
of the bridge is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1'
|
||
|
|
then that port is included in the set of ports; the port
|
||
|
|
is not included if its bit has a value of '0'.
|
||
|
|
|
||
|
|
Changes to this object affect the per-port per-VLAN
|
||
|
|
Registrar control for Registration Fixed for the
|
||
|
|
relevant GVRP state machine on each port.
|
||
|
|
|
||
|
|
The default value of this object for the default VLAN is a
|
||
|
|
portlist including all ports. There is no specified default
|
||
|
|
for other VLANs."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
||
|
|
::= { dot1qVlanStaticEntry 5 }
|
||
|
|
|
||
|
|
dot1qVlanStaticRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object is used to manage to creation and deletion of
|
||
|
|
a VLAN, and is used to indicate the status of this entry.
|
||
|
|
|
||
|
|
To Creating and activate a VLAN, first select a unused VID for
|
||
|
|
dot1qVlanIndex and then set its dot1qVlanStaticRowStatus to
|
||
|
|
'createAndGo'. The VLAN will be created in the device without
|
||
|
|
tagged or untagged ports. A default VLAN name is assigned and
|
||
|
|
the status is set to 'active'.
|
||
|
|
|
||
|
|
To configure tagged and untagged port members of the VLAN,
|
||
|
|
assign appropriate of dot1qVlanStaticTaggedPorts and
|
||
|
|
dot1qVlanStaticUntaggedPorts. A set operation takes effect
|
||
|
|
on the device immediately.
|
||
|
|
|
||
|
|
To delete a VLAN, select the VID for dot1qVlanIndex and set
|
||
|
|
dot1qVlanStaticRowStatus to 'destory'. The row and the
|
||
|
|
corresponding VLAN configurarion will be removed from the
|
||
|
|
device. VLAN 1 is the default VLAN and can never be deleted.
|
||
|
|
All untagged traffic falls into this VLAN by default.
|
||
|
|
|
||
|
|
'createAndWait', 'notInService', 'notReady' have no effects."
|
||
|
|
::= { dot1qVlanStaticEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
--dot1qVlanForbiddenEgressPorts OBJECT-TYPE
|
||
|
|
-- SYNTAX PortList
|
||
|
|
-- MAX-ACCESS read-create
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The set of ports which are prohibited by management
|
||
|
|
-- from being included in the egress list for this VLAN.
|
||
|
|
-- Changes to this object that cause a port to be included
|
||
|
|
-- or excluded affect the per-port per-VLAN Registrar
|
||
|
|
-- control for Registration Forbidden for the relevant
|
||
|
|
-- GVRP state machine on each port. A port may not be
|
||
|
|
-- added in this set if it is already a member of the set
|
||
|
|
-- of ports in dot1qVlanStaticEgressPorts. The default
|
||
|
|
-- value of this object is a string of zeros of appropriate
|
||
|
|
-- length, excluding all ports from the forbidden set."
|
||
|
|
-- REFERENCE
|
||
|
|
-- "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
|
||
|
|
-- ::= { dot1qVlanStaticEntry 5 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- GVRP configration
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dot1qGvrp OBJECT IDENTIFIER ::= { ieee8021qVlan 3 }
|
||
|
|
|
||
|
|
dot1qGvrpStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enable GVRP Protocol. "
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { dot1qGvrp 1 }
|
||
|
|
|
||
|
|
|
||
|
|
dot1qPortGvrpTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1qPortGvrpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing per port control and status information
|
||
|
|
for GVRP configuration in the device."
|
||
|
|
::= { dot1qGvrp 2 }
|
||
|
|
|
||
|
|
dot1qPortGvrpEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1qPortGvrpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling GVRP configuration for a port on the
|
||
|
|
device."
|
||
|
|
INDEX { dot1qPortGvrpIndex }
|
||
|
|
::= { dot1qPortGvrpTable 1 }
|
||
|
|
|
||
|
|
Dot1qPortGvrpEntry ::= SEQUENCE {
|
||
|
|
dot1qPortGvrpIndex INTEGER,
|
||
|
|
dot1qPortGvrpStatus INTEGER,
|
||
|
|
-- dot1qPortGvrpRegistrationMode INTEGER,
|
||
|
|
dot1qPortGarpJoinTimer TimeInterval,
|
||
|
|
dot1qPortGarpLeaveTimer TimeInterval,
|
||
|
|
dot1qPortGarpLeaveAllTimer TimeInterval
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1qPortGvrpIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port identifier."
|
||
|
|
::= { dot1qPortGvrpEntry 1 }
|
||
|
|
|
||
|
|
dot1qPortGvrpStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The state of GVRP operation on this port. The value enabled(1)
|
||
|
|
indicates that GVRP is enabled on this port, as long as
|
||
|
|
dot1qGvrpStatus is also enabled for this device. When disabled(2)
|
||
|
|
but dot1qGvrpStatus is still enabled for the device, GVRP is
|
||
|
|
disabled on this port: any GVRP packets received will be
|
||
|
|
silently discarded and no GVRP registrations will be propagated
|
||
|
|
from other ports. This object affects all GVRP Applicant and
|
||
|
|
Registrar state machines on this port. A transition from
|
||
|
|
disabled(2) to enabled(1) will cause a reset of all GVRP state
|
||
|
|
machines on this port."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { dot1qPortGvrpEntry 2 }
|
||
|
|
|
||
|
|
-- dot1qPortGvrpRegistrationMode OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- registrationFixed(1),
|
||
|
|
-- registrationForbidden(2),
|
||
|
|
-- registrationNormal(3)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Administrative controls"
|
||
|
|
-- ::= { dot1qPortGvrpEntry 3 }
|
||
|
|
|
||
|
|
dot1qPortGarpJoinTimer OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The GARP Join timer, in centiseconds."
|
||
|
|
DEFVAL { 20 }
|
||
|
|
::= { dot1qPortGvrpEntry 3 }
|
||
|
|
|
||
|
|
dot1qPortGarpLeaveTimer OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The GARP Leave time, in centiseconds."
|
||
|
|
DEFVAL { 60 }
|
||
|
|
::= { dot1qPortGvrpEntry 4 }
|
||
|
|
|
||
|
|
dot1qPortGarpLeaveAllTimer OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The GARP LeaveAll time, in centiseconds."
|
||
|
|
DEFVAL { 1000 }
|
||
|
|
::= { dot1qPortGvrpEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Vlan Current Configuration Table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dot1qVlanCurrentTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1qVlanCurrentEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing information about currently configured
|
||
|
|
VLANs, either by (local or network) management, or dynamically
|
||
|
|
created as a result of GVRP requests received."
|
||
|
|
::= { ieee8021qVlan 4 }
|
||
|
|
|
||
|
|
dot1qVlanCurrentEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1qVlanCurrentEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information for a VLAN configured into the device by
|
||
|
|
(local or network) management, or dynamically created
|
||
|
|
as a result of GVRP requests received."
|
||
|
|
INDEX { dot1qVlanCurrentIndex }
|
||
|
|
::= { dot1qVlanCurrentTable 1 }
|
||
|
|
|
||
|
|
Dot1qVlanCurrentEntry ::= SEQUENCE {
|
||
|
|
dot1qVlanCurrentIndex INTEGER,
|
||
|
|
dot1qVlanCurrentEgressPorts PortList,
|
||
|
|
dot1qVlanCurrentUntaggedPorts PortList,
|
||
|
|
dot1qVlanStatus INTEGER
|
||
|
|
-- dot1qVlanPortFa1 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortFa2 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortFa3 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortFa4 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortFa5 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortFa6 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortFa7 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortGi8 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortGi9 VlanEgressMode,
|
||
|
|
-- dot1qVlanPortGi10 VlanEgressMode
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1qVlanCurrentIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The VLAN Identifier (VID) refering to this VLAN."
|
||
|
|
::= { dot1qVlanCurrentEntry 1 }
|
||
|
|
|
||
|
|
dot1qVlanCurrentEgressPorts OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The set of ports which are transmitting traffic for
|
||
|
|
this VLAN as either tagged or untagged frames."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
||
|
|
::= { dot1qVlanCurrentEntry 2 }
|
||
|
|
|
||
|
|
dot1qVlanCurrentUntaggedPorts OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The set of ports which are transmitting traffic for
|
||
|
|
this VLAN as untagged frames."
|
||
|
|
REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1"
|
||
|
|
::= { dot1qVlanCurrentEntry 3 }
|
||
|
|
|
||
|
|
dot1qVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
permanent(2),
|
||
|
|
dynamicGvrp(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object indicates the status of this entry.
|
||
|
|
other(1) - this entry is currently in use but the
|
||
|
|
conditions under which it will remain so differ
|
||
|
|
from the following values.
|
||
|
|
permanent(2) - this entry, corresponding to an entry
|
||
|
|
in dot1qVlanStaticTable, is currently in use and
|
||
|
|
will remain so after the next reset of the
|
||
|
|
device. The port lists for this entry include
|
||
|
|
ports from the equivalent dot1qVlanStaticTable
|
||
|
|
entry and ports learnt dynamically.
|
||
|
|
dynamicGvrp(3) - this entry is currently in use
|
||
|
|
and will remain so until removed by GVRP. There
|
||
|
|
is no static entry for this VLAN and it will be
|
||
|
|
removed when the last port leaves the VLAN."
|
||
|
|
::= { dot1qVlanCurrentEntry 4 }
|
||
|
|
|
||
|
|
-- dot1qVlanPortFa1 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Fa1."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 5 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortFa2 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Fa2."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 6 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortFa3 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Fa3."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 7 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortFa4 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Fa4."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 8 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortFa5 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Fa5."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 9 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortFa6 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Fa6."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 10 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortFa7 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Fa7."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 11 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortGi8 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Gi8."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 12 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortGi9 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Gi9."
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 13 }
|
||
|
|
--
|
||
|
|
-- dot1qVlanPortGi10 OBJECT-TYPE
|
||
|
|
-- SYNTAX VlanEgressMode
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The vlan egress mode of port Gi10"
|
||
|
|
-- ::= { dot1qVlanCurrentEntry 14 }
|
||
|
|
--
|
||
|
|
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
-- dot1qTunnel/Q-in-Q
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
dot1qTunnel OBJECT IDENTIFIER ::= { ieee8021qVlan 5 }
|
||
|
|
dot1qTunnelEtherType OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING(SIZE (2))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "ethertype/TPID"
|
||
|
|
DEFVAL { '8100'H }
|
||
|
|
::= { dot1qTunnel 1 }
|
||
|
|
|
||
|
|
dot1qTunnelPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1qTunnelPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing per tunnel access or uplink port information in the device."
|
||
|
|
::= { dot1qTunnel 2 }
|
||
|
|
|
||
|
|
dot1qTunnelPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1qTunnelPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling tunnel configuration for a port on the device."
|
||
|
|
INDEX { dot1qTunnelPortIndex }
|
||
|
|
::= { dot1qTunnelPortTable 1 }
|
||
|
|
|
||
|
|
Dot1qTunnelPortEntry ::= SEQUENCE {
|
||
|
|
dot1qTunnelPortIndex INTEGER,
|
||
|
|
dot1qTunnelPortMode INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1qTunnelPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port identifier."
|
||
|
|
::= { dot1qTunnelPortEntry 1 }
|
||
|
|
|
||
|
|
dot1qTunnelPortMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
normal(1),
|
||
|
|
access(2),
|
||
|
|
uplink(3),
|
||
|
|
uplink-add-pvid(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Tunnel mode controls"
|
||
|
|
::= { dot1qTunnelPortEntry 2 }
|
||
|
|
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
-- Private VLAN
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
privateVlan OBJECT IDENTIFIER ::= { vlan 3 }
|
||
|
|
|
||
|
|
privateVlanIdTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrivateVlanIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing per Private VLAN ID information in the device."
|
||
|
|
::= { privateVlan 1 }
|
||
|
|
|
||
|
|
privateVlanIdEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrivateVlanIdEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling Private VLAN ID configuration on the device."
|
||
|
|
INDEX { privateVlanId }
|
||
|
|
::= { privateVlanIdTable 1 }
|
||
|
|
|
||
|
|
PrivateVlanIdEntry ::= SEQUENCE {
|
||
|
|
privateVlanId INTEGER,
|
||
|
|
privateVlanIdType INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
privateVlanId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Private VLAN ID."
|
||
|
|
::= { privateVlanIdEntry 1 }
|
||
|
|
|
||
|
|
privateVlanIdType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
normal(1),
|
||
|
|
community(2),
|
||
|
|
isolated(3),
|
||
|
|
primary(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Private VLAN ID type controls"
|
||
|
|
::= { privateVlanIdEntry 2 }
|
||
|
|
|
||
|
|
privateVlanPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrivateVlanPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing per Private VLAN Port information in the device."
|
||
|
|
::= { privateVlan 2 }
|
||
|
|
|
||
|
|
privateVlanPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrivateVlanPortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling Private VLAN Port configuration on the device."
|
||
|
|
INDEX { privateVlanPortIndex }
|
||
|
|
::= { privateVlanPortTable 1 }
|
||
|
|
|
||
|
|
PrivateVlanPortEntry ::= SEQUENCE {
|
||
|
|
privateVlanPortIndex INTEGER,
|
||
|
|
privateVlanPortMode INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
privateVlanPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Private Port Index."
|
||
|
|
::= { privateVlanPortEntry 1 }
|
||
|
|
|
||
|
|
privateVlanPortMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
normal(1),
|
||
|
|
host(2),
|
||
|
|
promiscuous(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Private VLAN Port mode controls"
|
||
|
|
::= { privateVlanPortEntry 2 }
|
||
|
|
|
||
|
|
privateVlanHostAssociationTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrivateVlanHostAssociationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing per Private VLAN host port association information in the device."
|
||
|
|
::= { privateVlan 3 }
|
||
|
|
|
||
|
|
privateVlanHostAssociationEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrivateVlanHostAssociationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling Private VLAN host port association configuration on the device."
|
||
|
|
INDEX { privateVlanHostAssociationPortIndex }
|
||
|
|
::= { privateVlanHostAssociationTable 1 }
|
||
|
|
|
||
|
|
PrivateVlanHostAssociationEntry ::= SEQUENCE {
|
||
|
|
privateVlanHostAssociationPortIndex INTEGER,
|
||
|
|
privateVlanHostAssociationPrimaryVid INTEGER,
|
||
|
|
privateVlanHostAssociationSecondaryVid INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
privateVlanHostAssociationPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..10)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Private Host Port Index."
|
||
|
|
::= { privateVlanHostAssociationEntry 1 }
|
||
|
|
|
||
|
|
privateVlanHostAssociationPrimaryVid OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Private VLAN host Port association primary VLAN ID. If enter 0 then clear setting."
|
||
|
|
::= { privateVlanHostAssociationEntry 2 }
|
||
|
|
|
||
|
|
privateVlanHostAssociationSecondaryVid OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Private VLAN host Port association secondary VLAN ID(isolated/community). If enter 0 then clear setting."
|
||
|
|
::= { privateVlanHostAssociationEntry 3 }
|
||
|
|
|
||
|
|
privateVlanMappingTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PrivateVlanMappingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing per Private VLAN promiscuous port mapping information in the device."
|
||
|
|
::= { privateVlan 4 }
|
||
|
|
|
||
|
|
privateVlanMappingEntry OBJECT-TYPE
|
||
|
|
SYNTAX PrivateVlanMappingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information controlling Private VLAN promiscuous port mapping configuration on the device."
|
||
|
|
INDEX { privateVlanMappingPromiscuousPortIndex }
|
||
|
|
::= { privateVlanMappingTable 1 }
|
||
|
|
|
||
|
|
PrivateVlanMappingEntry ::= SEQUENCE {
|
||
|
|
privateVlanMappingPromiscuousPortIndex INTEGER,
|
||
|
|
privateVlanMappingPrimaryVid INTEGER,
|
||
|
|
privateVlanMappingSecondaryVidList DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
privateVlanMappingPromiscuousPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..10)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Private Promiscuous Port Index."
|
||
|
|
::= { privateVlanMappingEntry 1 }
|
||
|
|
|
||
|
|
privateVlanMappingPrimaryVid OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Private VLAN promiscuous Port mapping primary VLAN ID. If enter 0 then clear setting."
|
||
|
|
::= { privateVlanMappingEntry 2 }
|
||
|
|
|
||
|
|
privateVlanMappingSecondaryVidList OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..64))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Private VLAN promiscuous Port mapping secondary VLAN ID list. If enter zero-length string then clear setting."
|
||
|
|
::= { privateVlanMappingEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
-- Port-based vlan
|
||
|
|
---------------------------------------------------------------------------
|
||
|
|
--portBasedVlanTable OBJECT-TYPE
|
||
|
|
-- SYNTAX SEQUENCE OF PortBasedVlanEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "A table containing per port control and status information
|
||
|
|
-- for port-based VLAN configuration in the device."
|
||
|
|
-- ::= { portBasedVlan 1 }
|
||
|
|
--
|
||
|
|
--portBasedVlanEntry OBJECT-TYPE
|
||
|
|
-- SYNTAX PortBasedVlanEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Information controlling port-based VLAN configuration for
|
||
|
|
-- a port on the device."
|
||
|
|
-- INDEX { portIndex }
|
||
|
|
-- ::= { portBasedVlanTable 1 }
|
||
|
|
--
|
||
|
|
--PortBasedVlanEntry ::= SEQUENCE {
|
||
|
|
-- portIndex INTEGER,
|
||
|
|
-- portPvid INTEGER,
|
||
|
|
-- portEgressPortList PortList,
|
||
|
|
-- portEgressMode INTEGER
|
||
|
|
--}
|
||
|
|
--
|
||
|
|
--portIndex OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The port identifier."
|
||
|
|
-- ::= { portBasedVlanEntry 1 }
|
||
|
|
--
|
||
|
|
--portPvid OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER(1..4094)
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The default Port VID, the VLAN ID assigned to an untagged
|
||
|
|
-- frame or a Priority-Tagged frame received on the port."
|
||
|
|
-- REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1"
|
||
|
|
-- DEFVAL { 1 }
|
||
|
|
-- ::= { portBasedVlanEntry 2 }
|
||
|
|
--
|
||
|
|
--portEgressPortList OBJECT-TYPE
|
||
|
|
-- SYNTAX PortList
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The ports to which a frame can egress from this port."
|
||
|
|
-- ::= { portBasedVlanEntry 3 }
|
||
|
|
--
|
||
|
|
--portEgressMode OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- untagged(1),
|
||
|
|
-- tagged(2),
|
||
|
|
-- unmodified(3)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "To configure if the frames egress from this port will be
|
||
|
|
-- add a 802.1Q vlan tag or not."
|
||
|
|
-- DEFVAL { untagged }
|
||
|
|
-- ::= { portBasedVlanEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- trafficPrioritization
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
qosPolicy OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
weighteRoundRobin-8-4-2-1(1),
|
||
|
|
strictPriority(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "(1)8,4,2,1 weight round robin scheme: the switch will follow
|
||
|
|
8:4:2:1 rate to process priority queue from Hi to lowest queue.
|
||
|
|
This approach prevents the lower priotiry packets from being
|
||
|
|
starved out with only a slight delay to the higher priority
|
||
|
|
packets.
|
||
|
|
|
||
|
|
(2)Use the strict priority scheme: Queue with higher priority
|
||
|
|
will always be process first, while queue with lower priority
|
||
|
|
will only be processed when the higher priority queue is empty.
|
||
|
|
This approach can cause the lower priorities the be startved
|
||
|
|
out preventing them from transmitting any packets, but it
|
||
|
|
ensures that all high priority packets serviced as soon as
|
||
|
|
possible."
|
||
|
|
::= { trafficPrioritization 1 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- port default cos table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
qosPortDefaultCosTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QosPortDefaultCosEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
port default cos value."
|
||
|
|
::= { trafficPrioritization 2 }
|
||
|
|
|
||
|
|
qosPortDefaultCosEntry OBJECT-TYPE
|
||
|
|
SYNTAX QosPortDefaultCosEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing inforamtion
|
||
|
|
about port default cos value."
|
||
|
|
INDEX { qosPortNum }
|
||
|
|
::= { qosPortDefaultCosTable 1 }
|
||
|
|
|
||
|
|
QosPortDefaultCosEntry ::= SEQUENCE {
|
||
|
|
qosPortNum Integer32,
|
||
|
|
qosPortTrust Integer32,
|
||
|
|
qosPortDefaultCos Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
qosPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Port number."
|
||
|
|
::= { qosPortDefaultCosEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
qosPortTrust OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 {
|
||
|
|
cos-only(1),
|
||
|
|
dscp-only(2),
|
||
|
|
cos-first(3),
|
||
|
|
dscp-first(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Two kinds of priority information are token into
|
||
|
|
consideration when a packet is processed. One is COS,
|
||
|
|
the IEEE 802.3ac tag containing IEEE 802.1p priority
|
||
|
|
information, and the other is DSCP, the IPv4 Type of
|
||
|
|
Service/DiffServ field.
|
||
|
|
(1)COS only: the port priority will only follow the
|
||
|
|
COS priority that you have assigned.
|
||
|
|
(2)DSCP only: the port priority will only follow the
|
||
|
|
DSCP priority that you have assigned.
|
||
|
|
(3)COS first: the port priority will follow the COS
|
||
|
|
priority first, and then other priority rule.
|
||
|
|
(4)DSCP first: the port priority will follow the DSCP
|
||
|
|
priority first, and the other priority rule."
|
||
|
|
DEFVAL { cos-first }
|
||
|
|
::= { qosPortDefaultCosEntry 2 }
|
||
|
|
|
||
|
|
qosPortDefaultCos OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..7)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port priority will follow the default port priority"
|
||
|
|
::= { qosPortDefaultCosEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- COS mapping table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
qosCOSTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QosCOSEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
COS QOS."
|
||
|
|
::= { trafficPrioritization 3 }
|
||
|
|
|
||
|
|
qosCOSEntry OBJECT-TYPE
|
||
|
|
SYNTAX QosCOSEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing inforamtion about COS QOS."
|
||
|
|
INDEX { qosCOSPriority }
|
||
|
|
::= { qosCOSTable 1 }
|
||
|
|
|
||
|
|
QosCOSEntry ::= SEQUENCE {
|
||
|
|
qosCOSPriority Integer32,
|
||
|
|
qosCOS INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
qosCOSPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..7)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "COS priority."
|
||
|
|
::= { qosCOSEntry 1 }
|
||
|
|
|
||
|
|
qosCOS OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
low(0),
|
||
|
|
middle(1),
|
||
|
|
high(2),
|
||
|
|
highest(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port priority will follow the COS priority
|
||
|
|
that you have assigned (0)low, (1)middle, (2)high,
|
||
|
|
or (3)highest."
|
||
|
|
::= { qosCOSEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- DSCP mapping table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
qosDscpTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF QosDscpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
DSCP QOS."
|
||
|
|
::= { trafficPrioritization 4 }
|
||
|
|
|
||
|
|
qosDscpEntry OBJECT-TYPE
|
||
|
|
SYNTAX QosDscpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing inforamtion
|
||
|
|
about DSCP QOS."
|
||
|
|
INDEX { qosDscpPriority }
|
||
|
|
::= { qosDscpTable 1 }
|
||
|
|
|
||
|
|
QosDscpEntry ::= SEQUENCE {
|
||
|
|
qosDscpPriority Integer32,
|
||
|
|
qosDscp INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
qosDscpPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..63)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Dscp priority."
|
||
|
|
::= { qosDscpEntry 1 }
|
||
|
|
|
||
|
|
qosDscp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
low(0),
|
||
|
|
middle(1),
|
||
|
|
high(2),
|
||
|
|
highest(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port priority will follow the Dscp priority
|
||
|
|
that you have assigned
|
||
|
|
(0)low (1)middle, (2)high, (3)highest."
|
||
|
|
::= { qosDscpEntry 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- multicastFiltering
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
igmpQuery OBJECT IDENTIFIER ::= { multicastFiltering 1 }
|
||
|
|
igmpSnooping OBJECT IDENTIFIER ::= { multicastFiltering 2 }
|
||
|
|
unknownMulticast OBJECT IDENTIFIER ::= { multicastFiltering 3 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- IGMP Query
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
igmpQueryVersion OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
version1(1),
|
||
|
|
version2(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "(1)IGMP Query version 1.
|
||
|
|
(2)IGMP Query version 2."
|
||
|
|
::= { igmpQuery 1 }
|
||
|
|
|
||
|
|
igmpQueryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "(1)enable IGMP Query on management vlan.
|
||
|
|
(2)disable IGMP Query."
|
||
|
|
::= { igmpQuery 2 }
|
||
|
|
|
||
|
|
igmpQueryInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The interval between General Queries sent
|
||
|
|
by this Querier in seconds."
|
||
|
|
DEFVAL { 125 }
|
||
|
|
::= { igmpQuery 3 }
|
||
|
|
|
||
|
|
igmpQueryMaxResponseTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..25)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Max Respocse Time is meaningful only in
|
||
|
|
Membership Query messages, and specifies
|
||
|
|
the maximum allowed time before sending
|
||
|
|
a responding report in seconds."
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { igmpQuery 4 }
|
||
|
|
|
||
|
|
--igmpQueryStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- auto(1),
|
||
|
|
-- enabled(2),
|
||
|
|
-- disabled(3)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "(1)Detect querier automatically.
|
||
|
|
-- (2)Force to be a querier.
|
||
|
|
-- (3)Be a silence snooper.
|
||
|
|
-- The mode of querier."
|
||
|
|
-- ::= { igmpQuery 1 }
|
||
|
|
|
||
|
|
--igmpQueryTable OBJECT-TYPE
|
||
|
|
-- SYNTAX SEQUENCE OF IgmpQueryEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Table of descriptive information about IGMP query."
|
||
|
|
-- ::= { igmpQuery 2 }
|
||
|
|
|
||
|
|
--igmpQueryEntry OBJECT-TYPE
|
||
|
|
-- SYNTAX IgmpQueryEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "An entry in the table, containing inforamtion
|
||
|
|
-- about IGMP query."
|
||
|
|
-- INDEX { igmpQueryEntryVID }
|
||
|
|
-- ::= { igmpQueryTable 1 }
|
||
|
|
|
||
|
|
--IgmpQueryEntry ::= SEQUENCE {
|
||
|
|
-- igmpQueryEntryVID INTEGER,
|
||
|
|
-- igmpQueryEntryStatus INTEGER
|
||
|
|
-- }
|
||
|
|
|
||
|
|
--igmpQueryEntryVID OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The vlan id where igmp snooping to be configured"
|
||
|
|
-- ::= { igmpQueryEntry 1 }
|
||
|
|
|
||
|
|
--igmpQueryEntryStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- auto(1),
|
||
|
|
-- enabled(2),
|
||
|
|
-- disabled(3)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The state of igmp Query operation on the vlan
|
||
|
|
-- (1)Detect querier automatically.
|
||
|
|
-- (2)Force to be a querier.
|
||
|
|
-- (3)Be a silence snooper.
|
||
|
|
-- (1) and (2) indicates that igmp Query is enabled on this
|
||
|
|
-- vlan, as long as igmpQueryStatus is also enabled for this
|
||
|
|
-- device. When disabled(3) but igmpQueryStatus is still
|
||
|
|
-- enabled for the device, igmp Query is disabled on this vlan."
|
||
|
|
-- DEFVAL { 1 }
|
||
|
|
-- ::= { igmpQueryEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- IGMP Snooping
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
igmpSnoopingStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
|
||
|
|
When enabled, the device will examine IGMP packets and set
|
||
|
|
up filters for multicast traffic.
|
||
|
|
|
||
|
|
The Internet Group Management Protocol (IGMP) is an internal
|
||
|
|
protocol of the Internet Protocol (IP) suite. IP manages
|
||
|
|
multicast traffic by using switches, routers, and hosts that
|
||
|
|
support IGMP. Enabling IGMP makes the device to gather
|
||
|
|
multicast group membership information by snooping IGMP
|
||
|
|
packets, which helps the device switch IP multicast traffic
|
||
|
|
to the ports where group members exist instead of flooding the
|
||
|
|
traffic to every ports.
|
||
|
|
|
||
|
|
IGMP have three fundamental types of message as follows:
|
||
|
|
|
||
|
|
Message Description
|
||
|
|
--------------------------------------------------------------
|
||
|
|
Query A message sent from the querier (IGMP router or switch)
|
||
|
|
asking for responses from each host belonging to a
|
||
|
|
multicast group.
|
||
|
|
|
||
|
|
Report A message sent by a host to the querier to indicate
|
||
|
|
that the host wants to be or is a member of a given
|
||
|
|
group indicated in the report message.
|
||
|
|
|
||
|
|
Leave A message sent by a host to the querier to indicate
|
||
|
|
that the host has quit to be a member for a specific
|
||
|
|
multicast group.
|
||
|
|
|
||
|
|
The IGMP snooping functionality is configured on a vlan basis.
|
||
|
|
To enable or disable IGMP snooping on vlans:
|
||
|
|
1. set igmpSnoopingStatus to enable(1) or disable(2).
|
||
|
|
2. specify on which vlan IGMP snooping works by configuring
|
||
|
|
each entries in the igmpSnoopingTable.
|
||
|
|
|
||
|
|
As a result, you can turn on or off IGMP snooping functionality
|
||
|
|
by setting igmpSnoopingStatus while keeping the configuration
|
||
|
|
for each vlan. Or you can turn on or off IGMP snooping for a
|
||
|
|
specific vlan in igmpSnoopingTable with the statuses on other
|
||
|
|
vlan untouched."
|
||
|
|
::= { igmpSnooping 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- igmpSnoopingTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
igmpSnoopingTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IgmpSnoopingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information about on which vlan is IGMP
|
||
|
|
snooping enabled."
|
||
|
|
::= { igmpSnooping 2 }
|
||
|
|
|
||
|
|
igmpSnoopingEntry OBJECT-TYPE
|
||
|
|
SYNTAX IgmpSnoopingEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Inforamtion enabling or disabling IGMP snooping on a vlan."
|
||
|
|
INDEX { igmpSnoopingEntryVID }
|
||
|
|
::= { igmpSnoopingTable 1 }
|
||
|
|
|
||
|
|
IgmpSnoopingEntry ::= SEQUENCE {
|
||
|
|
igmpSnoopingEntryVID INTEGER,
|
||
|
|
igmpSnoopingEntryStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
igmpSnoopingEntryVID OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The vlan id."
|
||
|
|
::= { igmpSnoopingEntry 1 }
|
||
|
|
|
||
|
|
igmpSnoopingEntryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The state of igmp snooping functionality on a vlan.
|
||
|
|
Set to enabled(1) indicates that igmp snooping is enabled on
|
||
|
|
the vlan. When igmpSnoopingStatus is also turned on, each IGMP
|
||
|
|
packets on the vlan will be processed.
|
||
|
|
When disabled(2) with igmpSnoopingStatus enabled, igmp packets
|
||
|
|
will not be processed and be propagated to other member ports
|
||
|
|
of the vlan.
|
||
|
|
A transition from disabled(2) to enabled(1) will cause a reset
|
||
|
|
of all igmp snooping information on this vlan."
|
||
|
|
DEFVAL { 2 }
|
||
|
|
::= { igmpSnoopingEntry 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- igmpSnoopingGroupTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
igmpSnoopingGroupTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IgmpSnoopingGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information about IGMP snooped multicast
|
||
|
|
groups."
|
||
|
|
::= { igmpSnooping 3 }
|
||
|
|
|
||
|
|
igmpSnoopingGroupEntry OBJECT-TYPE
|
||
|
|
SYNTAX IgmpSnoopingGroupEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information containing a multicast group and its member ports."
|
||
|
|
INDEX { igmpSnoopingGroupEntryVID, igmpSnoopingGroupEntryIPAddr }
|
||
|
|
::= { igmpSnoopingGroupTable 1 }
|
||
|
|
|
||
|
|
IgmpSnoopingGroupEntry ::= SEQUENCE {
|
||
|
|
igmpSnoopingGroupEntryVID INTEGER,
|
||
|
|
igmpSnoopingGroupEntryIPAddr IpAddress,
|
||
|
|
igmpSnoopingGroupEntryMembers PortList
|
||
|
|
}
|
||
|
|
|
||
|
|
igmpSnoopingGroupEntryVID OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The VLAN ID of an IGMP entry."
|
||
|
|
::= { igmpSnoopingGroupEntry 1 }
|
||
|
|
|
||
|
|
igmpSnoopingGroupEntryIPAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The multicast group IP address."
|
||
|
|
::= { igmpSnoopingGroupEntry 2 }
|
||
|
|
|
||
|
|
igmpSnoopingGroupEntryMembers OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The member ports of the group."
|
||
|
|
::= { igmpSnoopingGroupEntry 3 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- unknownMulticast
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
unknownMulticastStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
source-only-learning(1),
|
||
|
|
discard(2),
|
||
|
|
flood(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select IGMP Unknown Multicast policy.
|
||
|
|
(1) Send to Query Ports: The device sends the packets with
|
||
|
|
an unknown MAC/IP Multicast address to query ports
|
||
|
|
(2) Discard: The device discards all packets with an unknown
|
||
|
|
MAC/IP Multicast address.
|
||
|
|
(3) Send to All Ports: The device sends the packets with
|
||
|
|
an unknown MAC/IP Multicast address to all ports. "
|
||
|
|
DEFVAL { 3 }
|
||
|
|
::= { unknownMulticast 1 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- snmp
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
-- To be available in pharse II
|
||
|
|
--snmpAgentMode OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- v1v2Conly(1),
|
||
|
|
-- v3(2),
|
||
|
|
-- v1v2Cv3(3)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The Agent mode of snmp agent.
|
||
|
|
-- (1) SNMPV1/V2C Only.
|
||
|
|
-- (2) SNMPV3.
|
||
|
|
-- (3) SNMPV1/V2C/V3"
|
||
|
|
-- ::= { snmp 1 }
|
||
|
|
|
||
|
|
--snmpSystemName OBJECT-TYPE
|
||
|
|
-- SYNTAX DisplayString (SIZE(0..64))
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The system name."
|
||
|
|
-- ::= { snmp 2 }
|
||
|
|
|
||
|
|
--snmpSystemLocation OBJECT-TYPE
|
||
|
|
-- SYNTAX DisplayString (SIZE(0..64))
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The system location."
|
||
|
|
-- ::= { snmp 3 }
|
||
|
|
|
||
|
|
--snmpSystemContact OBJECT-TYPE
|
||
|
|
-- SYNTAX DisplayString (SIZE(0..64))
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The contact information of system."
|
||
|
|
-- ::= { snmp 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- snmpCommunityStringTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
snmpCommunityStringTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnmpCommunityStringEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of information configuring community strings of
|
||
|
|
SNMP agent.
|
||
|
|
|
||
|
|
An SNMP community string is a text string that acts as
|
||
|
|
a password. It is used to authenticate messages that
|
||
|
|
are sent between the management station (the SNMP manager)
|
||
|
|
and the device (the SNMP agent). The community string is
|
||
|
|
included in every packet that is transmitted between the
|
||
|
|
SNMP manager and the SNMP agent.
|
||
|
|
|
||
|
|
After receiving an SNMP request, the SNMP agent compares
|
||
|
|
the community string in the request to the community
|
||
|
|
strings that are configured for the agent. The requests
|
||
|
|
are valid under these circumstances:
|
||
|
|
|
||
|
|
- Only SNMP Get and Get-next requests are valid if the
|
||
|
|
community string in the request matches the read-only
|
||
|
|
community.
|
||
|
|
|
||
|
|
- SNMP Get, Get-next, and Set requests are valid if the
|
||
|
|
community string in the request matches the agent's
|
||
|
|
read-write community.
|
||
|
|
|
||
|
|
By default, 'public' is the read-only community and
|
||
|
|
'private' is the read-write community. Total 4 community
|
||
|
|
strings are allowed to configure in the device."
|
||
|
|
::= { snmp 1 }
|
||
|
|
|
||
|
|
snmpCommunityStringEntry OBJECT-TYPE
|
||
|
|
SYNTAX SnmpCommunityStringEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Inforamtion configuring an community string."
|
||
|
|
INDEX { snmpCommunityStringIndex }
|
||
|
|
::= { snmpCommunityStringTable 1 }
|
||
|
|
|
||
|
|
SnmpCommunityStringEntry ::= SEQUENCE {
|
||
|
|
snmpCommunityStringIndex Integer32,
|
||
|
|
snmpCommunityStringName DisplayString,
|
||
|
|
snmpCommunityStringPrivilege INTEGER,
|
||
|
|
snmpCommunityStringStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
snmpCommunityStringIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of community string."
|
||
|
|
::= { snmpCommunityStringEntry 1 }
|
||
|
|
|
||
|
|
snmpCommunityStringName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..32))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A community string with maximum 32 characters."
|
||
|
|
::= { snmpCommunityStringEntry 2 }
|
||
|
|
|
||
|
|
snmpCommunityStringPrivilege OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ro(1),
|
||
|
|
rw(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The access privilege of the community string."
|
||
|
|
::= { snmpCommunityStringEntry 3 }
|
||
|
|
|
||
|
|
snmpCommunityStringStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of this entry. Set to (5)createAndWait
|
||
|
|
to create a new entry. A new entry or an active
|
||
|
|
entry can be edited. Once an entry is modified,
|
||
|
|
its status becomes (3)notReady. Set to (1)active
|
||
|
|
to apply the modification to the switch. An entry
|
||
|
|
can be removed by setting to (6)destory."
|
||
|
|
::= { snmpCommunityStringEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- snmpV3UserTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
snmpV3UserTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnmpV3UserEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive and information about trap servers.
|
||
|
|
A trap server is the recipient of an SNMP trap. The device
|
||
|
|
does not send a trap unless it knows to which station it
|
||
|
|
should send a trap."
|
||
|
|
::= { snmp 2 }
|
||
|
|
|
||
|
|
snmpV3UserEntry OBJECT-TYPE
|
||
|
|
SYNTAX SnmpV3UserEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing inforamtion about a
|
||
|
|
trap server of SNMP agent."
|
||
|
|
INDEX { snmpTrapServerIndex }
|
||
|
|
::= { snmpV3UserTable 1 }
|
||
|
|
|
||
|
|
SnmpV3UserEntry ::= SEQUENCE {
|
||
|
|
snmpV3UserIndex Integer32,
|
||
|
|
snmpV3UserName DisplayString,
|
||
|
|
snmpV3UserSecurityLevel INTEGER,
|
||
|
|
snmpV3UserAuthProtocol INTEGER,
|
||
|
|
snmpV3UserAuthPassword DisplayString,
|
||
|
|
snmpV3UserDesPassword DisplayString,
|
||
|
|
snmpV3UserStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
snmpV3UserIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of snmp v3 user."
|
||
|
|
::= { snmpV3UserEntry 1 }
|
||
|
|
|
||
|
|
snmpV3UserName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { snmpV3UserEntry 2 }
|
||
|
|
|
||
|
|
snmpV3UserSecurityLevel OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noauth(1),
|
||
|
|
auth(2),
|
||
|
|
priv(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Specifiy the authentication and privacy level
|
||
|
|
- noauth(1) no authentication and no privacy.
|
||
|
|
- auth(2) enables MD5 or SHA packet authentication.
|
||
|
|
- priv(3) enables MD5 or SHA packet authentication
|
||
|
|
and DES packet encryption."
|
||
|
|
::= { snmpV3UserEntry 3 }
|
||
|
|
|
||
|
|
snmpV3UserAuthProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
md5(2),
|
||
|
|
sha(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MD5(Message Digest 5) or SHA (Secure Hash Algorithm)"
|
||
|
|
::= { snmpV3UserEntry 4 }
|
||
|
|
|
||
|
|
snmpV3UserAuthPassword OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { snmpV3UserEntry 5 }
|
||
|
|
|
||
|
|
snmpV3UserDesPassword OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { snmpV3UserEntry 6 }
|
||
|
|
|
||
|
|
snmpV3UserStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { snmpV3UserEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- snmpTrapServerTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
snmpTrapServerEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "To enable, disable snmp trap functionality.
|
||
|
|
|
||
|
|
SNMPv1 traps are defined in RFC 1157, and SNMPv2c trap is
|
||
|
|
defined as NOTIFICATION. SNMP traps enable this device to
|
||
|
|
notify the management station of significant events by way
|
||
|
|
of an unsolicited SNMP message. After the manager receives
|
||
|
|
the event, the manager displays it and can choose to take
|
||
|
|
an action based on the event. For instance, the manager can
|
||
|
|
poll the agent directly, or poll other associated device
|
||
|
|
agents to get a better understanding of the event."
|
||
|
|
::= { snmp 3 }
|
||
|
|
|
||
|
|
|
||
|
|
snmpTrapServerTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnmpTrapServerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive and information about trap servers.
|
||
|
|
A trap server is the recipient of an SNMP trap. The device
|
||
|
|
does not send a trap unless it knows to which station it
|
||
|
|
should send a trap."
|
||
|
|
::= { snmp 4 }
|
||
|
|
|
||
|
|
snmpTrapServerEntry OBJECT-TYPE
|
||
|
|
SYNTAX SnmpTrapServerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table, containing inforamtion about a
|
||
|
|
trap server of SNMP agent."
|
||
|
|
INDEX { snmpTrapServerIndex }
|
||
|
|
::= { snmpTrapServerTable 1 }
|
||
|
|
|
||
|
|
SnmpTrapServerEntry ::= SEQUENCE {
|
||
|
|
snmpTrapServerIndex Integer32,
|
||
|
|
snmpTrapServerIPAddr IpAddress,
|
||
|
|
snmpTrapServerTrapComm DisplayString,
|
||
|
|
snmpTrapServerTrapVer INTEGER,
|
||
|
|
snmpTrapServerStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
snmpTrapServerIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of trap server."
|
||
|
|
::= { snmpTrapServerEntry 1 }
|
||
|
|
|
||
|
|
snmpTrapServerIPAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Trap Server IP Address."
|
||
|
|
::= { snmpTrapServerEntry 2 }
|
||
|
|
|
||
|
|
snmpTrapServerTrapComm OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..32))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The community string of trap server. The password-like string
|
||
|
|
will be sent with the notification operation."
|
||
|
|
::= { snmpTrapServerEntry 3 }
|
||
|
|
|
||
|
|
snmpTrapServerTrapVer OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
v1(1),
|
||
|
|
v2c(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The trap version."
|
||
|
|
::= { snmpTrapServerEntry 4 }
|
||
|
|
|
||
|
|
snmpTrapServerStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of this entry. Set to (5)createAndWait
|
||
|
|
to create a new entry. A new entry or an active
|
||
|
|
entry can be edited. Once an entry is modified,
|
||
|
|
its status becomes (3)notReady. Set to (1)active
|
||
|
|
to apply the modification to the device. An entry
|
||
|
|
can be removed by setting to (6)destory."
|
||
|
|
::= { snmpTrapServerEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- security
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
portSecurity OBJECT IDENTIFIER ::= { security 1 }
|
||
|
|
ipSecurity OBJECT IDENTIFIER ::= { security 2 }
|
||
|
|
dot1x OBJECT IDENTIFIER ::= { security 3 }
|
||
|
|
--macFiltering OBJECT IDENTIFIER ::= { security 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portSecurityStatusTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
portSecurityStatusTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortSecurityStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing information about port security status on
|
||
|
|
each port.
|
||
|
|
|
||
|
|
Port security prevents a port from address learning. Only
|
||
|
|
those MAC addresses that are configured by management are
|
||
|
|
allowed to access the switch or transmit/receive through the
|
||
|
|
port. Upto 10 MAC addresses can assigned to each port by adding
|
||
|
|
address entries to portSecurityMacTable or macAddrTable.
|
||
|
|
|
||
|
|
If the port security functionality is enabled but without any
|
||
|
|
MAC address configured on a port, no traffic can access the
|
||
|
|
switch or transmit/receive from the port."
|
||
|
|
::= { portSecurity 1 }
|
||
|
|
|
||
|
|
portSecurityStatusEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortSecurityStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry configuring port security for a port."
|
||
|
|
INDEX { portSecurityPortIndex }
|
||
|
|
::= { portSecurityStatusTable 1 }
|
||
|
|
|
||
|
|
PortSecurityStatusEntry ::= SEQUENCE {
|
||
|
|
portSecurityPortIndex Integer32,
|
||
|
|
portSecurityPortStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
portSecurityPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port id."
|
||
|
|
::= { portSecurityStatusEntry 1 }
|
||
|
|
|
||
|
|
portSecurityPortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "(1)enable port security on this port.
|
||
|
|
(2)disable port security on this port."
|
||
|
|
::= { portSecurityStatusEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portSecurityMacTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
portSecurityMacTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortSecurityMacEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table configuring static unicast MAC address for each port.
|
||
|
|
|
||
|
|
When you add a static MAC address, it remains in the switch's
|
||
|
|
address table, regardless of whether the device is physically
|
||
|
|
connected to the switch.
|
||
|
|
|
||
|
|
With enabling port security in portSecurityStatusTable, only
|
||
|
|
those MAC addresses configured in portSecurityMacTable are
|
||
|
|
allowed to access the switch or transmit/receive through the
|
||
|
|
port."
|
||
|
|
::= { portSecurity 2 }
|
||
|
|
|
||
|
|
portSecurityMacEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortSecurityMacEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry configuring a static unicast MAC addresses on a port."
|
||
|
|
INDEX { portSecurityMacIndex }
|
||
|
|
::= { portSecurityMacTable 1 }
|
||
|
|
|
||
|
|
PortSecurityMacEntry ::= SEQUENCE {
|
||
|
|
portSecurityMacIndex Integer32,
|
||
|
|
portSecurityPort Integer32,
|
||
|
|
portSecurityVlanIndex Integer32,
|
||
|
|
portSecurityMac MacAddress,
|
||
|
|
portSecurityMacStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
portSecurityMacIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of MAC."
|
||
|
|
::= { portSecurityMacEntry 1 }
|
||
|
|
|
||
|
|
portSecurityPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port id."
|
||
|
|
::= { portSecurityMacEntry 2 }
|
||
|
|
|
||
|
|
portSecurityVlanIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The vlan id where the MAC address belongs to."
|
||
|
|
::= { portSecurityMacEntry 3 }
|
||
|
|
|
||
|
|
portSecurityMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MAC address of the entry."
|
||
|
|
::= { portSecurityMacEntry 4 }
|
||
|
|
|
||
|
|
portSecurityMacStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The status of this entry. Set to (5)createAndWait
|
||
|
|
to create a new entry. A new entry or an active
|
||
|
|
entry can be edited. Once an entry is modified,
|
||
|
|
its status becomes (3)notReady. Set to (1)active
|
||
|
|
to apply the modification to the device. An entry
|
||
|
|
can be removed by setting to (6)destory."
|
||
|
|
::= { portSecurityMacEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- ipSecurity
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
ipSecurityStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Enable or disable IP security functionality.
|
||
|
|
|
||
|
|
IP security allows you to assign specific IP addresses that
|
||
|
|
are permitted to access the device for securing switch
|
||
|
|
management. Set to (1) to enable IP Security. set to (2) to
|
||
|
|
disable IP Security.
|
||
|
|
|
||
|
|
Enabling IP Security without any entries configured in the
|
||
|
|
ipSecurityTable has no effect on the access traffic."
|
||
|
|
::= { ipSecurity 1 }
|
||
|
|
|
||
|
|
ipSecurityTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF IpSecurityEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table configuring IP addresses that can access and manage the
|
||
|
|
device through network, such as telnet, web or SNMP.
|
||
|
|
|
||
|
|
Please note that enabling IP security function but without
|
||
|
|
adding the IP address of your current management station will
|
||
|
|
break current management connection."
|
||
|
|
::= { ipSecurity 2 }
|
||
|
|
|
||
|
|
ipSecurityEntry OBJECT-TYPE
|
||
|
|
SYNTAX IpSecurityEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry configuring an security IP address."
|
||
|
|
INDEX { ipSecurityIndex }
|
||
|
|
::= { ipSecurityTable 1 }
|
||
|
|
|
||
|
|
IpSecurityEntry ::= SEQUENCE {
|
||
|
|
ipSecurityIndex Integer32,
|
||
|
|
ipSecurityIP IpAddress,
|
||
|
|
ipSecurityRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
ipSecurityIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..10)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of IP address entry."
|
||
|
|
::= { ipSecurityEntry 1 }
|
||
|
|
|
||
|
|
ipSecurityIP OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An IP address that can access and manage the device."
|
||
|
|
::= { ipSecurityEntry 2 }
|
||
|
|
|
||
|
|
ipSecurityRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object is used to manage to creation and deletion of
|
||
|
|
a authorized IP address, and is used to indicate the status
|
||
|
|
of this entry. A empty entry or an active entry can be edited.
|
||
|
|
Once an entry is modified, its status becomes (3)notReady.
|
||
|
|
Set to (1)active to apply the modification to the device. An
|
||
|
|
entry can be removed by setting to (6)destory."
|
||
|
|
::= { ipSecurityEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
--ipSecurityIP1 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 2 }
|
||
|
|
|
||
|
|
--ipSecurityIP2 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 3 }
|
||
|
|
|
||
|
|
--ipSecurityIP3 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 4 }
|
||
|
|
|
||
|
|
--ipSecurityIP4 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 5 }
|
||
|
|
|
||
|
|
--ipSecurityIP5 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 6 }
|
||
|
|
|
||
|
|
--ipSecurityIP6 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 7 }
|
||
|
|
|
||
|
|
--ipSecurityIP7 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 8 }
|
||
|
|
|
||
|
|
--ipSecurityIP8 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 9 }
|
||
|
|
|
||
|
|
--ipSecurityIP9 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 10 }
|
||
|
|
|
||
|
|
--ipSecurityIP10 OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "This IP address can access and manage the device."
|
||
|
|
-- ::= { ipSecurity 11 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- macFilteringTable, NOT SUPPORT
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
--macFilteringTable OBJECT-TYPE
|
||
|
|
-- SYNTAX SEQUENCE OF MACFilteringEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Table of descriptive information about
|
||
|
|
-- MAC filter configuration.
|
||
|
|
-- MAC address filtering allows the switch to drop
|
||
|
|
-- unwanted traffic. Traffic is filtered based on
|
||
|
|
-- the destination addresses. For example, if your
|
||
|
|
-- network is congested because of high utilization
|
||
|
|
-- from one MAC address, you can filter all traffic
|
||
|
|
-- transmitted to that MAC address, restoring network
|
||
|
|
-- flow while you troubleshoot the problem."
|
||
|
|
-- ::= { macFiltering 1}
|
||
|
|
--
|
||
|
|
--macFilteringEntry OBJECT-TYPE
|
||
|
|
-- SYNTAX MACFilteringEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "An entry in the table, containing inforamtion
|
||
|
|
-- about MAC filter configuration."
|
||
|
|
-- INDEX { macFilteringIndex }
|
||
|
|
-- ::= { macFilteringTable 1 }
|
||
|
|
--
|
||
|
|
--MACFilteringEntry ::= SEQUENCE
|
||
|
|
--{
|
||
|
|
-- macFilteringIndex Integer32,
|
||
|
|
-- macFilteringAddr MacAddress,
|
||
|
|
-- macFilteringStatus INTEGER
|
||
|
|
--}
|
||
|
|
--
|
||
|
|
--macFilteringIndex OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Index of MAC."
|
||
|
|
-- ::= { macFilteringEntry 1 }
|
||
|
|
--
|
||
|
|
--macFilteringAddr OBJECT-TYPE
|
||
|
|
-- SYNTAX MacAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "MAC address of the entry."
|
||
|
|
-- ::= { macFilteringEntry 2 }
|
||
|
|
--
|
||
|
|
--macFilteringStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER
|
||
|
|
-- {
|
||
|
|
-- valid(1),
|
||
|
|
-- creatrequest(2),
|
||
|
|
-- undercreation(3),
|
||
|
|
-- invalid(4)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-create
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The status of this entry. If this object is not equal to valid(1), all associated
|
||
|
|
-- MAC entries shall be deleted by the agent."
|
||
|
|
-- ::= { macFilteringEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- dot1x
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dot1xStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IEEE802.1x protocol function status.
|
||
|
|
(1) IEEE802.1x protocol function is enabled.
|
||
|
|
(2) IEEE802.1x protocol function is disabled.
|
||
|
|
802.1x makes use of the physical access characteristics
|
||
|
|
of IEEE802 LAN infrastructures in order to provide a
|
||
|
|
means of authenticating and authorizing devices attached
|
||
|
|
to a LAN port that has point-to-point connection
|
||
|
|
characteristics, and of preventing access to that port
|
||
|
|
in cases in which the authentication and authorization
|
||
|
|
process fails."
|
||
|
|
::= { dot1x 1 }
|
||
|
|
|
||
|
|
dot1xAuthentication OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
local(1),
|
||
|
|
radius(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1x 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- radiusServerTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
radiusServerTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF RadiusServerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1x 3 }
|
||
|
|
|
||
|
|
radiusServerEntry OBJECT-TYPE
|
||
|
|
SYNTAX RadiusServerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
INDEX { radiusServerIndex }
|
||
|
|
::= { radiusServerTable 1 }
|
||
|
|
|
||
|
|
RadiusServerEntry ::= SEQUENCE {
|
||
|
|
radiusServerIndex Integer32,
|
||
|
|
radiusServerIp IpAddress,
|
||
|
|
radiusServerServerPort Integer32,
|
||
|
|
radiusServerAccountingPort Integer32,
|
||
|
|
radiusServerSharedKey DisplayString
|
||
|
|
-- radiusServerStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
radiusServerIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of Radius server configuration."
|
||
|
|
::= { radiusServerEntry 1 }
|
||
|
|
|
||
|
|
radiusServerIp OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "IP address of this radius server."
|
||
|
|
::= { radiusServerEntry 2 }
|
||
|
|
|
||
|
|
radiusServerServerPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The UDP port number used by the authentication server
|
||
|
|
to authenticate."
|
||
|
|
::= { radiusServerEntry 3 }
|
||
|
|
|
||
|
|
radiusServerAccountingPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Accounting Port: The UDP port number used by the authentication
|
||
|
|
server to retrieve accounting information."
|
||
|
|
::= { radiusServerEntry 4 }
|
||
|
|
|
||
|
|
radiusServerSharedKey OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A key shared between this switch and authentication server."
|
||
|
|
::= { radiusServerEntry 5 }
|
||
|
|
|
||
|
|
--radiusServerStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX RowStatus
|
||
|
|
-- MAX-ACCESS read-create
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "."
|
||
|
|
-- ::= { radiusServerEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- dot1xLocalUserTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dot1xLocalUserTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1xLocalUserEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1x 4 }
|
||
|
|
|
||
|
|
dot1xLocalUserEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1xLocalUserEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
INDEX { dot1xLocalUserIndex }
|
||
|
|
::= { dot1xLocalUserTable 1 }
|
||
|
|
|
||
|
|
Dot1xLocalUserEntry ::= SEQUENCE {
|
||
|
|
dot1xLocalUserIndex Integer32,
|
||
|
|
dot1xLocalUserName DisplayString,
|
||
|
|
dot1xLocalUserPassword DisplayString,
|
||
|
|
dot1xLocalUserVid Integer32
|
||
|
|
--dot1xLocalUserStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1xLocalUserIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xLocalUserEntry 1 }
|
||
|
|
|
||
|
|
dot1xLocalUserName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "set this field to empty to remove this user config."
|
||
|
|
::= { dot1xLocalUserEntry 2 }
|
||
|
|
|
||
|
|
dot1xLocalUserPassword OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xLocalUserEntry 3 }
|
||
|
|
|
||
|
|
dot1xLocalUserVid OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xLocalUserEntry 4 }
|
||
|
|
|
||
|
|
--dot1xLocalUserStatus OBJECT-TYPE
|
||
|
|
--SYNTAX RowStatus
|
||
|
|
--MAX-ACCESS read-create
|
||
|
|
--STATUS current
|
||
|
|
--DESCRIPTION "."
|
||
|
|
--::= { dot1xLocalUserEntry 5 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- dot1xPortConfigTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dot1xPortConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1xPortConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1x 5 }
|
||
|
|
|
||
|
|
dot1xPortConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1xPortConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
INDEX { dot1xPortConfigIndex }
|
||
|
|
::= { dot1xPortConfigTable 1 }
|
||
|
|
|
||
|
|
Dot1xPortConfigEntry ::= SEQUENCE {
|
||
|
|
dot1xPortConfigIndex Integer32,
|
||
|
|
dot1xPortAuthControl INTEGER,
|
||
|
|
dot1xPortReauthentication INTEGER,
|
||
|
|
dot1xPortMaxRequest INTEGER,
|
||
|
|
dot1xPortGuestVlan INTEGER,
|
||
|
|
dot1xPortHostMode INTEGER,
|
||
|
|
dot1xPortAdminDirection INTEGER,
|
||
|
|
dot1xPortConfigSetDefault INTEGER,
|
||
|
|
dot1xPortReinitialize INTEGER,
|
||
|
|
dot1xPortClientReauth INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1xPortConfigIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 1 }
|
||
|
|
|
||
|
|
dot1xPortAuthControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
forceAuthorized(2),
|
||
|
|
forceUnauthorized(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 2 }
|
||
|
|
|
||
|
|
dot1xPortReauthentication OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 3 }
|
||
|
|
|
||
|
|
dot1xPortMaxRequest OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 4 }
|
||
|
|
|
||
|
|
dot1xPortGuestVlan OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 5 }
|
||
|
|
|
||
|
|
dot1xPortHostMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
single(1),
|
||
|
|
multiple(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 6 }
|
||
|
|
|
||
|
|
dot1xPortAdminDirection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
both(1),
|
||
|
|
in(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 7 }
|
||
|
|
|
||
|
|
dot1xPortConfigSetDefault OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
apply(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 8 }
|
||
|
|
|
||
|
|
dot1xPortReinitialize OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
apply(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 9 }
|
||
|
|
|
||
|
|
dot1xPortClientReauth OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
apply(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS write-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortConfigEntry 10 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- dot1xPortTimeoutConfigTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dot1xPortTimeoutConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1xPortTimeoutConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1x 6 }
|
||
|
|
|
||
|
|
dot1xPortTimeoutConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1xPortTimeoutConfigEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
INDEX { dot1xPortTimeoutIndex }
|
||
|
|
::= { dot1xPortTimeoutConfigTable 1 }
|
||
|
|
|
||
|
|
Dot1xPortTimeoutConfigEntry ::= SEQUENCE {
|
||
|
|
dot1xPortTimeoutIndex Integer32,
|
||
|
|
dot1xPortReauthPeriod Integer32,
|
||
|
|
dot1xPortQuietPeriod Integer32,
|
||
|
|
dot1xPortTxPeriod Integer32,
|
||
|
|
dot1xPortSupplicantTimeout Integer32,
|
||
|
|
dot1xPortServerTimeout Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1xPortTimeoutIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortTimeoutConfigEntry 1 }
|
||
|
|
|
||
|
|
dot1xPortReauthPeriod OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortTimeoutConfigEntry 2 }
|
||
|
|
|
||
|
|
dot1xPortQuietPeriod OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortTimeoutConfigEntry 3 }
|
||
|
|
|
||
|
|
dot1xPortTxPeriod OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortTimeoutConfigEntry 4 }
|
||
|
|
|
||
|
|
dot1xPortSupplicantTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortTimeoutConfigEntry 5 }
|
||
|
|
|
||
|
|
dot1xPortServerTimeout OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortTimeoutConfigEntry 6 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- dot1xPortStatusTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dot1xPortStatusTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Dot1xPortStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1x 7 }
|
||
|
|
|
||
|
|
dot1xPortStatusEntry OBJECT-TYPE
|
||
|
|
SYNTAX Dot1xPortStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
INDEX { dot1xPortStatusIndex }
|
||
|
|
::= { dot1xPortStatusTable 1 }
|
||
|
|
|
||
|
|
Dot1xPortStatusEntry ::= SEQUENCE {
|
||
|
|
dot1xPortStatusIndex Integer32,
|
||
|
|
dot1xPortCtrl INTEGER,
|
||
|
|
dot1xPortAuthStatus INTEGER,
|
||
|
|
dot1xPortAuthSupplicant MacAddress,
|
||
|
|
dot1xPortOperDirection INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
dot1xPortStatusIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortStatusEntry 1 }
|
||
|
|
|
||
|
|
dot1xPortCtrl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
forceAuthorized(2),
|
||
|
|
forceUnauthorized(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortStatusEntry 2 }
|
||
|
|
|
||
|
|
dot1xPortAuthStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
authorized(1),
|
||
|
|
unauthorized(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortStatusEntry 3 }
|
||
|
|
|
||
|
|
dot1xPortAuthSupplicant OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortStatusEntry 4 }
|
||
|
|
|
||
|
|
dot1xPortOperDirection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
both(1),
|
||
|
|
in(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "."
|
||
|
|
::= { dot1xPortStatusEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
--radiusServerSetting OBJECT IDENTIFIER ::= { ieee8021x 1 }
|
||
|
|
--portAuthConfiguration OBJECT IDENTIFIER ::= { ieee8021x 2 }
|
||
|
|
|
||
|
|
--radius8021xProtocolStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER
|
||
|
|
-- {
|
||
|
|
-- enabled(1),
|
||
|
|
-- disabled(2)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "IEEE802.1x protocol function status.
|
||
|
|
-- (1) IEEE802.1x protocol function is enabled.
|
||
|
|
-- (2) IEEE802.1x protocol function is disabled.
|
||
|
|
-- 802.1x makes use of the physical access characteristics
|
||
|
|
-- of IEEE802 LAN infrastructures in order to provide a
|
||
|
|
-- means of authenticating and authorizing devices attached
|
||
|
|
-- to a LAN port that has point-to-point connection
|
||
|
|
-- characteristics, and of preventing access to that port
|
||
|
|
-- in cases in which the authentication and authorization
|
||
|
|
-- process fails."
|
||
|
|
-- ::= { radiusServerSetting 1 }
|
||
|
|
|
||
|
|
--radiusServerIP OBJECT-TYPE
|
||
|
|
-- SYNTAX IpAddress
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Radius Server IP Address: the ip address of the authentication server."
|
||
|
|
-- ::= { radiusServerSetting 2 }
|
||
|
|
|
||
|
|
--radiusServerPort OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Server Port: The UDP port number used by the authentication server to authenticate."
|
||
|
|
-- ::= { radiusServerSetting 3 }
|
||
|
|
--
|
||
|
|
--radiusAccountingPort OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Accounting Port: The UDP port number used by the authentication server to retrieve
|
||
|
|
-- accounting information. "
|
||
|
|
-- ::= { radiusServerSetting 4 }
|
||
|
|
--
|
||
|
|
--radiusSharedKey OBJECT-TYPE
|
||
|
|
-- SYNTAX DisplayString (SIZE(0..30))
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Shared Key: A key shared between this switch and authentication server."
|
||
|
|
-- ::= { radiusServerSetting 5 }
|
||
|
|
--
|
||
|
|
--radiusNASIdentifier OBJECT-TYPE
|
||
|
|
-- SYNTAX DisplayString (SIZE(0..30))
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "NAS Identifier: A string used to identify this switch."
|
||
|
|
-- ::= { radiusServerSetting 6 }
|
||
|
|
--
|
||
|
|
--radiusMiscQuietPeriod OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Quiet Period: used to define periods of time during
|
||
|
|
-- which it will not attempt to acquire a supplicant
|
||
|
|
-- (Default time is 60 seconds)."
|
||
|
|
-- ::= { radiusServerSetting 7 }
|
||
|
|
--
|
||
|
|
--radiusMiscTxPeriod OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Tx Period: used to determine when an EAPOL PDU is to
|
||
|
|
-- be transmitted(Default value is 30 seconds)."
|
||
|
|
-- ::= { radiusServerSetting 8 }
|
||
|
|
--
|
||
|
|
--radiusMiscSupplicantTimeout OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Supplicant Timeout: used to determine timeout conditions
|
||
|
|
-- in the exchanges between the supplicant and
|
||
|
|
-- authentication server(Default value is 30 seconds)."
|
||
|
|
-- ::= { radiusServerSetting 9 }
|
||
|
|
--
|
||
|
|
--radiusMiscServerTimeout OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Server Timeout: used to determine timeout conditions
|
||
|
|
-- in the exchanges between the authenticator and
|
||
|
|
-- authentication server(Default value is 30 seconds)."
|
||
|
|
-- ::= { radiusServerSetting 10}
|
||
|
|
--
|
||
|
|
--radiusMiscReAuthMax OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "ReAuthMax: used to determine the number of
|
||
|
|
-- reauthentication attempts that are permitted
|
||
|
|
-- before the specific port becomes unauthorized
|
||
|
|
-- (Default value is 2 times)."
|
||
|
|
-- ::= { radiusServerSetting 11}
|
||
|
|
--
|
||
|
|
--radiusMiscReauthPeriod OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Reauth Period: used to determine a nonzero number
|
||
|
|
-- of seconds between periodic reauthentication of
|
||
|
|
-- the supplications(Default value is 3600 seconds)."
|
||
|
|
-- ::= { radiusServerSetting 12}
|
||
|
|
--
|
||
|
|
--radiusPerPortCfgTable OBJECT-TYPE
|
||
|
|
-- SYNTAX SEQUENCE OF RadiusPerPortCfgEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Table of descriptive information and configuration about
|
||
|
|
-- Radius per port configuration."
|
||
|
|
-- ::= { portAuthConfiguration 1}
|
||
|
|
--
|
||
|
|
--radiusPerPortCfgEntry OBJECT-TYPE
|
||
|
|
-- SYNTAX RadiusPerPortCfgEntry
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "An entry in the table, containing inforamtion
|
||
|
|
-- about Radius per port configuration."
|
||
|
|
-- INDEX { radiusPerPortCfgIndex }
|
||
|
|
-- ::= { radiusPerPortCfgTable 1 }
|
||
|
|
--
|
||
|
|
--RadiusPerPortCfgEntry ::= SEQUENCE
|
||
|
|
--{
|
||
|
|
-- radiusPerPortCfgIndex Integer32,
|
||
|
|
-- radiusPerPortCfgPortName DisplayString,
|
||
|
|
-- radiusPerPortCfgState INTEGER
|
||
|
|
--}
|
||
|
|
--
|
||
|
|
--radiusPerPortCfgIndex OBJECT-TYPE
|
||
|
|
-- SYNTAX Integer32
|
||
|
|
-- MAX-ACCESS not-accessible
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "Index of port."
|
||
|
|
-- ::= { radiusPerPortCfgEntry 1 }
|
||
|
|
--
|
||
|
|
--radiusPerPortCfgPortName OBJECT-TYPE
|
||
|
|
-- SYNTAX DisplayString (SIZE(0..16))
|
||
|
|
-- MAX-ACCESS read-only
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "The name of port."
|
||
|
|
-- ::= { radiusPerPortCfgEntry 2 }
|
||
|
|
--
|
||
|
|
--radiusPerPortCfgState OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER
|
||
|
|
-- {
|
||
|
|
-- reject(1),
|
||
|
|
-- accept(2),
|
||
|
|
-- authorize(3),
|
||
|
|
-- disabled(4)
|
||
|
|
-- }
|
||
|
|
-- MAX-ACCESS read-write
|
||
|
|
-- STATUS current
|
||
|
|
-- DESCRIPTION "You can select the specific port and configure the
|
||
|
|
-- authorization state. Each port can select four kinds
|
||
|
|
-- of authorization state :
|
||
|
|
-- Reject: force the specific port to be unauthorized.
|
||
|
|
-- Accept: force the specific port to be authorized.
|
||
|
|
-- Authorize: the state of the specific port was determinied by
|
||
|
|
-- the outcome of the authentication.
|
||
|
|
-- Disable: the specific port didn't support 802.1x function."
|
||
|
|
-- ::= { radiusPerPortCfgEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Warning
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
faultRelay OBJECT IDENTIFIER ::= { warning 1 }
|
||
|
|
eventAndEmailWarning OBJECT IDENTIFIER ::= { warning 2 }
|
||
|
|
hardwareStatus OBJECT IDENTIFIER ::= { warning 3 }
|
||
|
|
|
||
|
|
eventSelection OBJECT IDENTIFIER ::= { eventAndEmailWarning 1 }
|
||
|
|
sysLogConfiguration OBJECT IDENTIFIER ::= { eventAndEmailWarning 2 }
|
||
|
|
smtpConfiguration OBJECT IDENTIFIER ::= { eventAndEmailWarning 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Fault Relay
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
faultRelayTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FaultRelayEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of configuration about fault relay.
|
||
|
|
|
||
|
|
A fault relay is able to control an output circuit which is
|
||
|
|
triggered by management defined fault events. There are two
|
||
|
|
fault relays in the device, each is controlled by an
|
||
|
|
faultRelayEntry in this table.
|
||
|
|
|
||
|
|
To configure a fault relay, first select the type of fault
|
||
|
|
event which will trigger the relay in faultSelection, and
|
||
|
|
then configure the related column.
|
||
|
|
|
||
|
|
Set faultRelayEntryStatus to active(1) to set the configuration
|
||
|
|
to the device."
|
||
|
|
::= { faultRelay 1 }
|
||
|
|
|
||
|
|
faultRelayEntry OBJECT-TYPE
|
||
|
|
SYNTAX FaultRelayEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A entry controlling a fault relay configuration."
|
||
|
|
INDEX { faultRelayId }
|
||
|
|
::= { faultRelayTable 1 }
|
||
|
|
|
||
|
|
FaultRelayEntry ::= SEQUENCE {
|
||
|
|
faultRelayId INTEGER,
|
||
|
|
faultSelection INTEGER,
|
||
|
|
diConfig INTEGER,
|
||
|
|
dryOutputOnPeriodConfig INTEGER,
|
||
|
|
dryOutputOffPeriodConfig INTEGER,
|
||
|
|
powerFailureConfig INTEGER,
|
||
|
|
linkFailureConfig PortList,
|
||
|
|
pingFailureIP IpAddress,
|
||
|
|
pingResetTime INTEGER,
|
||
|
|
pingHoldTime INTEGER,
|
||
|
|
faultRelayEntryStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
faultRelayId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
relay1(1),
|
||
|
|
relay2(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of fault relay."
|
||
|
|
::= { faultRelayEntry 1 }
|
||
|
|
|
||
|
|
faultSelection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
diState(1),
|
||
|
|
dryOutput(2),
|
||
|
|
powerFailure(3),
|
||
|
|
linkFailure(4),
|
||
|
|
pingFailure(5),
|
||
|
|
superRingFailure(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select the type of fault event that triggers the relay.
|
||
|
|
To config a fault relay, first select the founction this
|
||
|
|
relay serves for, then configure the condition that
|
||
|
|
triggers the relay in detail. At last, set the
|
||
|
|
faultRelayEntryStatus to active(1) or nonActive(3) to
|
||
|
|
enable or disable the setting on the relay."
|
||
|
|
::= { faultRelayEntry 2 }
|
||
|
|
|
||
|
|
diConfig OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
di1Low(1),
|
||
|
|
di1High(2),
|
||
|
|
di2Low(3),
|
||
|
|
di2High(4),
|
||
|
|
disable(5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The fault relay will be triggered if digital input is low
|
||
|
|
or high."
|
||
|
|
::= { faultRelayEntry 3 }
|
||
|
|
|
||
|
|
dryOutputOnPeriodConfig OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..1000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The fault relay will be closed after a period (in seconds).
|
||
|
|
Together with dryOutputOffPeriodConfig, the fault relay can
|
||
|
|
be configured to continue on and off."
|
||
|
|
::= { faultRelayEntry 4 }
|
||
|
|
|
||
|
|
dryOutputOffPeriodConfig OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(1..1000)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The fault relay will be opened after a period (in seconds).
|
||
|
|
Together with dryOutputOnPeriodConfig, the fault relay can
|
||
|
|
be configured to continue on and off."
|
||
|
|
::= { faultRelayEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
powerFailureConfig OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
power1(1),
|
||
|
|
power2(2),
|
||
|
|
any(255),
|
||
|
|
disable(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The fault relay will be triggered if the configured
|
||
|
|
power fails. Any means either power 1 or power2 fails"
|
||
|
|
::= { faultRelayEntry 6 }
|
||
|
|
|
||
|
|
linkFailureConfig OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The fault relay will be trigger if any of the configured
|
||
|
|
links fails."
|
||
|
|
::= { faultRelayEntry 7 }
|
||
|
|
|
||
|
|
pingFailureIP OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The fault relay will be trigger if fail to ping the assigned
|
||
|
|
IP address."
|
||
|
|
::= { faultRelayEntry 8 }
|
||
|
|
|
||
|
|
pingResetTime OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Reset the ping process after pingResetTime, and then wait
|
||
|
|
pingHoldTime to ping again. (optional)"
|
||
|
|
::= { faultRelayEntry 9 }
|
||
|
|
|
||
|
|
pingHoldTime OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Reset the ping process after pingResetTime, and then wait
|
||
|
|
pingHoldTime to ping again. (optional)"
|
||
|
|
::= { faultRelayEntry 10 }
|
||
|
|
|
||
|
|
faultRelayEntryStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
configuring(2),
|
||
|
|
notActive(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Setting this object to active(1) to save the configuration
|
||
|
|
to the device. Setting this object to notActive(3) disable
|
||
|
|
the configuration.
|
||
|
|
|
||
|
|
The system returns active(1) or notActive when the settings
|
||
|
|
of the entry is enabled or disabled on the relay. And the
|
||
|
|
status becomes configuring(2) when the settings of the entry
|
||
|
|
are modified and not set to active(1) yet."
|
||
|
|
::= { faultRelayEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- System Event Table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
systemEventTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SystemEventEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and controls the reactions
|
||
|
|
to system events.
|
||
|
|
|
||
|
|
Three types of reactions will be triggered: (1)logging in the
|
||
|
|
switch or send logs to remote syslog servers, (2)sending an
|
||
|
|
email, or (3)send an snmp trap. Each type of alert is configured
|
||
|
|
in sysLogConfiguration, smtpConfiguration, snmpTrapServerEnable
|
||
|
|
and snmpTrapServerTable."
|
||
|
|
::= { eventSelection 1 }
|
||
|
|
|
||
|
|
systemEventEntry OBJECT-TYPE
|
||
|
|
SYNTAX SystemEventEntry
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing type of system events."
|
||
|
|
INDEX { eventSystemEventIndex }
|
||
|
|
::= { systemEventTable 1 }
|
||
|
|
|
||
|
|
SystemEventEntry ::= SEQUENCE {
|
||
|
|
eventSystemEventIndex Integer32,
|
||
|
|
eventDeviceColdStartEvent AlertType,
|
||
|
|
eventDeviceWarmStartEvent AlertType,
|
||
|
|
eventAuthenticationFailureEvent AlertType,
|
||
|
|
eventRingEvent AlertType,
|
||
|
|
eventPower1FailureEvent AlertType,
|
||
|
|
eventPower2FailureEvent AlertType,
|
||
|
|
eventFaultRelayEvent AlertType,
|
||
|
|
eventTimeSynchronizeEvent AlertType,
|
||
|
|
eventSFPEvent AlertType,
|
||
|
|
eventDI1ChangeEvent AlertType,
|
||
|
|
eventDI2ChangeEvent AlertType,
|
||
|
|
eventLoopDetectionEvent AlertType,
|
||
|
|
}
|
||
|
|
|
||
|
|
eventSystemEventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of events."
|
||
|
|
::= { systemEventEntry 1 }
|
||
|
|
|
||
|
|
eventDeviceColdStartEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when the device
|
||
|
|
cold starts."
|
||
|
|
-- DESCRIPTION "Parameter to indicate the event should be logged or should be
|
||
|
|
-- sent as an Email alert.
|
||
|
|
-- The value can't be log(1) or logandsmtp(3), if syslogStatus
|
||
|
|
-- is disabled. The value can't be smtp(2) or logandsmtp(3), if
|
||
|
|
-- eventEmailAlertStatus is disabled."
|
||
|
|
::= { systemEventEntry 2 }
|
||
|
|
|
||
|
|
eventDeviceWarmStartEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when the device
|
||
|
|
warm starts."
|
||
|
|
::= { systemEventEntry 3 }
|
||
|
|
|
||
|
|
eventAuthenticationFailureEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when
|
||
|
|
authentication failure."
|
||
|
|
::= { systemEventEntry 4 }
|
||
|
|
|
||
|
|
eventRingEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when ring
|
||
|
|
event occured."
|
||
|
|
::= { systemEventEntry 5 }
|
||
|
|
|
||
|
|
eventPower1FailureEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when power1
|
||
|
|
failure."
|
||
|
|
::= { systemEventEntry 6 }
|
||
|
|
|
||
|
|
eventPower2FailureEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when power2
|
||
|
|
failure."
|
||
|
|
::= { systemEventEntry 7 }
|
||
|
|
|
||
|
|
eventFaultRelayEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when a fault
|
||
|
|
relay is triggered."
|
||
|
|
::= { systemEventEntry 8 }
|
||
|
|
|
||
|
|
eventTimeSynchronizeEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when time
|
||
|
|
synchronizatonn failed."
|
||
|
|
::= { systemEventEntry 9 }
|
||
|
|
|
||
|
|
eventSFPEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when SFP
|
||
|
|
event occured."
|
||
|
|
::= { systemEventEntry 10 }
|
||
|
|
|
||
|
|
eventDI1ChangeEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when DI1
|
||
|
|
changed ."
|
||
|
|
::= { systemEventEntry 11 }
|
||
|
|
|
||
|
|
eventDI2ChangeEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when DI2
|
||
|
|
changed ."
|
||
|
|
::= { systemEventEntry 12 }
|
||
|
|
|
||
|
|
eventLoopDetectionEvent OBJECT-TYPE
|
||
|
|
SYNTAX AlertType
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select which warning machanism to take place when loop detection
|
||
|
|
event occured."
|
||
|
|
::= { systemEventEntry 13 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Port Event Table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
portEventTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortEventEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and controls the reactions
|
||
|
|
to port link up, link down, or both link up and down.
|
||
|
|
|
||
|
|
Three types of reactions will be triggered: (1)logging in the
|
||
|
|
switch or send logs to remote syslog servers, (2)sending an
|
||
|
|
email, or (3)send an snmp trap. Each type of alert is configured
|
||
|
|
in sysLogConfiguration, smtpConfiguration, snmpTrapServerEnable
|
||
|
|
and snmpTrapServerTable."
|
||
|
|
::= { eventSelection 2 }
|
||
|
|
|
||
|
|
portEventEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortEventEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry controlling the type of port events."
|
||
|
|
INDEX { eventPortNumber }
|
||
|
|
::= { portEventTable 1 }
|
||
|
|
|
||
|
|
PortEventEntry ::= SEQUENCE {
|
||
|
|
eventPortNumber Integer32,
|
||
|
|
eventPortEvent INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
eventPortNumber OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Port number."
|
||
|
|
::= {portEventEntry 1 }
|
||
|
|
|
||
|
|
eventPortEvent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
linkup(1),
|
||
|
|
linkdown(2),
|
||
|
|
linkupandlinkdown(3),
|
||
|
|
disabled(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Select the port event to react to."
|
||
|
|
::= { portEventEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- System Log
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
sysLogLocalStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Parameter to configure if the log should to be kept in the
|
||
|
|
device or not."
|
||
|
|
::= { sysLogConfiguration 1 }
|
||
|
|
|
||
|
|
sysLogRemoteStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Parameter to configure the log should be sent to a syslog
|
||
|
|
server specified in sysLogServerAddr or not. When disabled
|
||
|
|
or sysLogServerAddr is 0, the device will not send out or
|
||
|
|
record any log."
|
||
|
|
::= { sysLogConfiguration 2 }
|
||
|
|
|
||
|
|
sysLogServerAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address of syslog server."
|
||
|
|
::= { sysLogConfiguration 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Email Alert
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
eventEmailAlertStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Parameter to enable the email alert feature, When enabled,
|
||
|
|
the switch will send an email to the address presented in
|
||
|
|
emailAlertRcptTable."
|
||
|
|
::= { smtpConfiguration 1 }
|
||
|
|
|
||
|
|
eventEmailAlertServer OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The IP address of SMTP server. It can't be modified when
|
||
|
|
eventEmailAlertStatus is disabled."
|
||
|
|
::= { smtpConfiguration 2 }
|
||
|
|
|
||
|
|
eventEmailAlertAccount OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..70))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The email account for SMTP server. It can't be modified when
|
||
|
|
eventEmailAlertAuthentication is disabled."
|
||
|
|
::= { smtpConfiguration 3 }
|
||
|
|
|
||
|
|
eventEmailAlertAuthentication OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to (1)enabled if it needs authentication to connect to
|
||
|
|
the SMTP server. It can't be modified when
|
||
|
|
eventEmailAlertStatus is disabled."
|
||
|
|
::= { smtpConfiguration 4 }
|
||
|
|
|
||
|
|
eventEmailAlertUser OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..70))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The email account for SMTP server. It can't be modified when
|
||
|
|
eventEmailAlertAuthentication is disabled."
|
||
|
|
::= { smtpConfiguration 5 }
|
||
|
|
|
||
|
|
eventEmailAlertPassword OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..36))
|
||
|
|
MAX-ACCESS write-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The password of email account. It can't be modified when
|
||
|
|
eventEmailAlertAuthentication is disabled."
|
||
|
|
::= { smtpConfiguration 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- emailAlertReptTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
emailAlertRcptTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EmailAlertRcptEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table configuring recipient email addresses."
|
||
|
|
::= { smtpConfiguration 7 }
|
||
|
|
|
||
|
|
emailAlertRcptEntry OBJECT-TYPE
|
||
|
|
SYNTAX EmailAlertRcptEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing recipient email address."
|
||
|
|
INDEX { eventEmailAlertRcptIndex }
|
||
|
|
::= { emailAlertRcptTable 1 }
|
||
|
|
|
||
|
|
EmailAlertRcptEntry ::= SEQUENCE {
|
||
|
|
eventEmailAlertRcptIndex Integer32,
|
||
|
|
eventEmailAlertRcptEmailAddr DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
eventEmailAlertRcptIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of recipient Email address."
|
||
|
|
::= { emailAlertRcptEntry 1 }
|
||
|
|
|
||
|
|
eventEmailAlertRcptEmailAddr OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..48))
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A recipient email address."
|
||
|
|
::= { emailAlertRcptEntry 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Hardware Status Table
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
hardwareStatusTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HardwareStatusEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatus 1 }
|
||
|
|
|
||
|
|
hardwareStatusEntry OBJECT-TYPE
|
||
|
|
SYNTAX HardwareStatusEntry
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
INDEX { ledHardwareStatusIndex }
|
||
|
|
::= { hardwareStatusTable 1 }
|
||
|
|
|
||
|
|
HardwareStatusEntry ::= SEQUENCE {
|
||
|
|
ledHardwareStatusIndex Integer32,
|
||
|
|
ledPower1Status INTEGER,
|
||
|
|
ledPower2Status INTEGER,
|
||
|
|
ledDO1Status INTEGER,
|
||
|
|
ledDO2Status INTEGER,
|
||
|
|
ledDI1Status INTEGER,
|
||
|
|
ledDI2Status INTEGER,
|
||
|
|
ledRMStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
ledHardwareStatusIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of leds."
|
||
|
|
::= { hardwareStatusEntry 1 }
|
||
|
|
|
||
|
|
ledPower1Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatusEntry 2 }
|
||
|
|
|
||
|
|
ledPower2Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatusEntry 3 }
|
||
|
|
|
||
|
|
ledDO1Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatusEntry 4 }
|
||
|
|
|
||
|
|
ledDO2Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatusEntry 5 }
|
||
|
|
|
||
|
|
ledDI1Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatusEntry 6 }
|
||
|
|
|
||
|
|
ledDI2Status OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatusEntry 7 }
|
||
|
|
|
||
|
|
ledRMStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION ""
|
||
|
|
::= { hardwareStatusEntry 8 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- Monitor and Diag
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
macAddressTable OBJECT IDENTIFIER ::= { monitorandDiag 1 }
|
||
|
|
portStatistic OBJECT IDENTIFIER ::= { monitorandDiag 2 }
|
||
|
|
portmirroring OBJECT IDENTIFIER ::= { monitorandDiag 3 }
|
||
|
|
eventLog OBJECT IDENTIFIER ::= { monitorandDiag 4 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- macAddressTable
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
macAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MACAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "A table containing information about unicast or multicast
|
||
|
|
MAC addresses that currently learned, configured by management
|
||
|
|
or IGMP snooping."
|
||
|
|
::= { macAddressTable 1 }
|
||
|
|
|
||
|
|
macAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX MACAddrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry containing inforamtion about a MAC address entry."
|
||
|
|
INDEX { macAddressAddr }
|
||
|
|
::= { macAddrTable 1 }
|
||
|
|
|
||
|
|
MACAddrEntry ::= SEQUENCE {
|
||
|
|
macAddressAddr MacAddress,
|
||
|
|
macAddressType INTEGER,
|
||
|
|
macAddressPortList PortList,
|
||
|
|
macAddressVlanId Integer32,
|
||
|
|
macAddressStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
macAddressAddr OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "MAC address of the entry."
|
||
|
|
::= { macAddrEntry 1 }
|
||
|
|
|
||
|
|
macAddressType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
dynamicUnicast(1),
|
||
|
|
staticUnicast(2),
|
||
|
|
managementUnicast(3),
|
||
|
|
dynamicMulticast(4),
|
||
|
|
staticMulticast(5),
|
||
|
|
managementMulticast(6)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The type of this entry.
|
||
|
|
dynamicUnicast(1) - unicast address that learned from source
|
||
|
|
address of ingress frames.
|
||
|
|
staticUnicast(2) - unicast address that configured by management
|
||
|
|
and will remain so after the next reset of the device. Upto
|
||
|
|
10 static unicast entries can be configured for each port.
|
||
|
|
managementUnicast(3) - unicast address that configured for
|
||
|
|
management purpose or the MAC address of the device itself.
|
||
|
|
Management unicast entries are read-only.
|
||
|
|
dynamicMulticast(4) - dynamic multicast address that configured
|
||
|
|
by IGMP snooping. These entries are read-only.
|
||
|
|
staticMulticast(5) - multicast address that configured by
|
||
|
|
management and will remain so after the next reset of the
|
||
|
|
device.
|
||
|
|
-- Upto 10 static multicast entries can be configured.
|
||
|
|
managementMulticast(6) - multicast address that configured for
|
||
|
|
management purpose, such as GVRP and so on. These entries
|
||
|
|
are read-only.
|
||
|
|
Management entries are read-only. Dynamic entries can be read
|
||
|
|
and delete. Only static entries are read-create.
|
||
|
|
"
|
||
|
|
::= { macAddrEntry 2 }
|
||
|
|
|
||
|
|
macAddressPortList OBJECT-TYPE
|
||
|
|
SYNTAX PortList
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The port list, which must be valid when creating a new entry."
|
||
|
|
::= { macAddrEntry 3 }
|
||
|
|
|
||
|
|
macAddressVlanId OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The VLAN where the mac address learned from or configured to."
|
||
|
|
::= { macAddrEntry 4 }
|
||
|
|
|
||
|
|
macAddressStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This object is used to manage to creation and deletion of
|
||
|
|
a static entry, and is used to indicate the status of an entry.
|
||
|
|
|
||
|
|
To Creating a static entry, select a unused value of
|
||
|
|
macAddressIndex and set macAddressStatus to 'createAndWait'.
|
||
|
|
A row will then be created with status set to 'notReady' and
|
||
|
|
its macAddressType, macAddressPortList and macAddressVlanId
|
||
|
|
left unspecified.
|
||
|
|
|
||
|
|
macAddressType, macAddressPortList and macAddressVlanId are
|
||
|
|
mandatory to activate an entry to the device. macAddressStatus
|
||
|
|
remains 'notReady' if any of these three objects are invalid.
|
||
|
|
macAddressStatus will be changed to 'notInService' when the
|
||
|
|
three objects are correctly configured. Set macAddressStatus
|
||
|
|
to 'active' to activate the MAC entry to the device.
|
||
|
|
|
||
|
|
Static unicast and multicast entries and dynamic unicast entries
|
||
|
|
are removable. To delete a MAC entry, select the macAddressIndex
|
||
|
|
set macAddressStatus to 'destory'. The row and the corresponding
|
||
|
|
MAC address configurarion will be removed from the device.
|
||
|
|
|
||
|
|
Set macAddressStatus to 'createAndGo', 'notInService', 'notReady'
|
||
|
|
have no effects."
|
||
|
|
::= { macAddrEntry 5 }
|
||
|
|
|
||
|
|
macAddrTableClear OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
clear(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to clear for cleaning all the dynamic MAC entries in the
|
||
|
|
MAC address table."
|
||
|
|
::= { macAddressTable 2 }
|
||
|
|
|
||
|
|
|
||
|
|
macAddrTableAgingTime OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER(0..3825)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "This value determines the interval that an automatic learned
|
||
|
|
MAC address entry remains valid in the forwarding database,
|
||
|
|
since its last access as a source address, before being purged.
|
||
|
|
The value should be times of 15 in seconds. The minimum age
|
||
|
|
time is 15 seconds. The maximum age time is 3825 seconds or
|
||
|
|
almost 64 minutes. if the value is set to 0, the aging function
|
||
|
|
is disabled and all learned address will remain in the database
|
||
|
|
forever."
|
||
|
|
DEFVAL { 300 }
|
||
|
|
::= { macAddressTable 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portStatistic
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
switchPortStatTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SwitchPortStatEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive and statistics information about each
|
||
|
|
switch ports."
|
||
|
|
::= { portStatistic 1 }
|
||
|
|
|
||
|
|
|
||
|
|
switchPortStatClear OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
clear(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS write-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Set to clear(1) to clear all information in the statistics
|
||
|
|
table."
|
||
|
|
::= { portStatistic 2 }
|
||
|
|
|
||
|
|
|
||
|
|
switchPortStatEntry OBJECT-TYPE
|
||
|
|
SYNTAX SwitchPortStatEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table containing descriptive information
|
||
|
|
and statistics of a port."
|
||
|
|
INDEX { swPortStatIndex }
|
||
|
|
::= { switchPortStatTable 1 }
|
||
|
|
|
||
|
|
SwitchPortStatEntry ::= SEQUENCE {
|
||
|
|
swPortStatIndex Integer32,
|
||
|
|
swPortStatType INTEGER,
|
||
|
|
swPortStatLink INTEGER,
|
||
|
|
swPortStatState INTEGER,
|
||
|
|
swPortStatRXGoodPkt Integer32,
|
||
|
|
swPortStatRXBadPkt Integer32,
|
||
|
|
swPortStatRXAbortPkt Integer32,
|
||
|
|
swPortStatTXGoodPkt Integer32,
|
||
|
|
swPortStatTXBadPkt Integer32,
|
||
|
|
swPortStatPacketCollision Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
swPortStatIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of port statistic table."
|
||
|
|
::= { switchPortStatEntry 1 }
|
||
|
|
|
||
|
|
swPortStatType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
hundredBaseTX(1),
|
||
|
|
thousandBaseT(2),
|
||
|
|
hundredBaseFX(3),
|
||
|
|
thousandBaseSX(4),
|
||
|
|
thousandBaseLX(5),
|
||
|
|
other(6),
|
||
|
|
notPresent(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicates the port type."
|
||
|
|
::= { switchPortStatEntry 2 }
|
||
|
|
|
||
|
|
swPortStatLink OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
up(1),
|
||
|
|
down(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicates the link state."
|
||
|
|
::= { switchPortStatEntry 3 }
|
||
|
|
|
||
|
|
swPortStatState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Indicates the port state."
|
||
|
|
::= { switchPortStatEntry 4 }
|
||
|
|
|
||
|
|
swPortStatRXGoodPkt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The count of good frames received, which is the total number
|
||
|
|
of recieved unicast, broadcast, multicast and pause frames."
|
||
|
|
::= { switchPortStatEntry 5 }
|
||
|
|
|
||
|
|
swPortStatRXBadPkt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The count of bad frames received, which is the total number of
|
||
|
|
undersize, fragment, oversize, jabber, RXErr and FCSErr frames."
|
||
|
|
::= { switchPortStatEntry 6 }
|
||
|
|
|
||
|
|
swPortStatRXAbortPkt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The count of abort frames when receive, which is the total
|
||
|
|
number of discarded and filtered frames."
|
||
|
|
::= { switchPortStatEntry 7 }
|
||
|
|
|
||
|
|
swPortStatTXGoodPkt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The count of good frames transmitted, which is the total number
|
||
|
|
of transmitted unicast, broadcast, multicast and pause frames."
|
||
|
|
::= { switchPortStatEntry 8 }
|
||
|
|
|
||
|
|
swPortStatTXBadPkt OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The count of FCSErr frames when transmit."
|
||
|
|
::= { switchPortStatEntry 9 }
|
||
|
|
|
||
|
|
swPortStatPacketCollision OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The count of collision."
|
||
|
|
::= { switchPortStatEntry 10 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- portmirroring
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
portMirrorStatus OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 {
|
||
|
|
enable(1),
|
||
|
|
disable(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "To enable or disable port mirroring.
|
||
|
|
Port mirroring is used to send a copy of inbound or outbound
|
||
|
|
network packets seen on one port to another switch port.
|
||
|
|
Administrators may utilized this mechanism to monitor network
|
||
|
|
traffic as well as the performance of a switch."
|
||
|
|
::= { portmirroring 1 }
|
||
|
|
|
||
|
|
portMirrorDestinationPortTX OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..10)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The TX destination port (sniffer port).
|
||
|
|
|
||
|
|
Destination port can be used to see all monitor port traffic.
|
||
|
|
You can connect sniffer port to a LAN analysier or netxray.
|
||
|
|
Set to 0 to clear the configuration. A destination port can
|
||
|
|
not be the same as a source port.
|
||
|
|
|
||
|
|
This object can not be modified if portMirrorStatus is
|
||
|
|
disable."
|
||
|
|
::= { portmirroring 2 }
|
||
|
|
|
||
|
|
portMirrorDestinationPortRX OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(0..10)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The RX destination port (sniffer port).
|
||
|
|
|
||
|
|
Destination port can be used to see all monitor port traffic.
|
||
|
|
You can connect sniffer port to a LAN analysier or netxray.
|
||
|
|
Set to 0 to clear the configuration. A destination port can
|
||
|
|
not be the same as a source port.
|
||
|
|
|
||
|
|
This object can not be modified if portMirrorStatus is
|
||
|
|
disable."
|
||
|
|
::= { portmirroring 3 }
|
||
|
|
|
||
|
|
portMirrorSourceTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PortMirrorSourceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information and configuration of port
|
||
|
|
mirroring in this system.
|
||
|
|
Use this table to select monitor port for this switch."
|
||
|
|
::= { portmirroring 4 }
|
||
|
|
|
||
|
|
portMirrorSourceEntry OBJECT-TYPE
|
||
|
|
SYNTAX PortMirrorSourceEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Information configuring port mirroring on each port."
|
||
|
|
INDEX { portMirrorPortNum }
|
||
|
|
::= { portMirrorSourceTable 1 }
|
||
|
|
|
||
|
|
PortMirrorSourceEntry ::= SEQUENCE {
|
||
|
|
portMirrorPortNum Integer32,
|
||
|
|
portMirrorSourcePort INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
portMirrorPortNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32(1..10)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The Port number."
|
||
|
|
::= { portMirrorSourceEntry 1 }
|
||
|
|
|
||
|
|
portMirrorSourcePort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
txOnly(1),
|
||
|
|
rxOnly(2),
|
||
|
|
rxAndTx(3),
|
||
|
|
disabled(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The mode of source port (monitor port).
|
||
|
|
(1) TX only.
|
||
|
|
(2) RX only.
|
||
|
|
(3) RX and TX.
|
||
|
|
(4) Source port is disabled.
|
||
|
|
The ports you want to monitor. All source port traffic
|
||
|
|
will be copied to destination port (sniffer port).
|
||
|
|
This object can not be modified if portMirrorStatus is
|
||
|
|
disable."
|
||
|
|
::= { portMirrorSourceEntry 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- eventLog
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
eventLogClear OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "clear all event log."
|
||
|
|
::= {eventLog 1 }
|
||
|
|
|
||
|
|
eventLogTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EventLogEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Table of descriptive information about logs."
|
||
|
|
::= { eventLog 2 }
|
||
|
|
|
||
|
|
eventLogEntry OBJECT-TYPE
|
||
|
|
SYNTAX EventLogEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An entry in the table containing a log."
|
||
|
|
INDEX { eventLogIndex }
|
||
|
|
::= { eventLogTable 1 }
|
||
|
|
|
||
|
|
EventLogEntry ::= SEQUENCE {
|
||
|
|
eventLogIndex Integer32,
|
||
|
|
eventLogDescription DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
eventLogIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Index of log."
|
||
|
|
::= {eventLogEntry 1 }
|
||
|
|
|
||
|
|
eventLogDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..100))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "The description of a log."
|
||
|
|
::= { eventLogEntry 2 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
-- save
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
|
||
|
|
saveCfgMgtAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notActive(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Setting this object to active(1) saves current configuration.
|
||
|
|
Setting this object to notActive(2) has no effect. The system
|
||
|
|
always returns the value notActive(2) when this object is read."
|
||
|
|
::= { save 1 }
|
||
|
|
|
||
|
|
END
|