mibs/MIBS/comware/HH3C-ATM-DXI-MIB

326 lines
12 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- Copyright (C) 2005 New H3C Tech. Co., Ltd. All rights reserved.
-- Description: This MIB is used for configuration of ATM-DXI.
-- include :1.ATM-DXI PVC
-- 2.ATM-DXI MAP
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2005/04/14 created by Liguanmin
-- ============================================================================
HH3C-ATM-DXI-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cCommon
FROM HH3C-OID-MIB
ifIndex
FROM RFC1213-MIB
OBJECT-GROUP,MODULE-COMPLIANCE
FROM SNMPv2-CONF
Integer32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
InetAddressType,InetAddress
FROM INET-ADDRESS-MIB
RowStatus
FROM SNMPv2-TC;
hh3cAtmDxi MODULE-IDENTITY
LAST-UPDATED "200504141518Z" -- 14 April, 2005 at 15:18 GMT
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"This MIB contains objects to manage configuration of ATM-DXI.
There are no constraints on this MIB."
REVISION "200504141518Z" -- 14 April, 2005 at 15:18 GMT
DESCRIPTION
"The initial revision of this MIB module."
::= { hh3cCommon 49 }
--
-- Node definitions
--
hh3cAtmDxiScalarGroup OBJECT IDENTIFIER ::= { hh3cAtmDxi 1 }
hh3cAtmDxiConfMode OBJECT-TYPE
SYNTAX INTEGER
{
mode1a(1),
mode1b(2),
mode2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This node identifies the ATM-DXI mode being
used at the ATM-DXI port."
::= { hh3cAtmDxiScalarGroup 1 }
hh3cAtmDxiIfObjects OBJECT IDENTIFIER ::= { hh3cAtmDxi 2 }
hh3cAtmDxiPvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cAtmDxiPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes information of PVC in ATM-DXI interface."
::= { hh3cAtmDxiIfObjects 1 }
hh3cAtmDxiPvcEntry OBJECT-TYPE
SYNTAX Hh3cAtmDxiPvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of hh3cAtmDxiPvcTable."
INDEX { ifIndex, hh3cAtmDxiPvcVpi, hh3cAtmDxiPvcVci }
::= { hh3cAtmDxiPvcTable 1 }
Hh3cAtmDxiPvcEntry ::=
SEQUENCE {
hh3cAtmDxiPvcVpi
Integer32,
hh3cAtmDxiPvcVci
Integer32,
hh3cAtmDxiPvcDFA
Integer32,
hh3cAtmDxiPvcEncType
INTEGER,
hh3cAtmDxiPvcMapCount
Integer32,
hh3cAtmDxiPvcRowStatus
RowStatus
}
hh3cAtmDxiPvcVpi OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of VPI. It can't be 0 if hh3cAtmDxiPvcVci is 0."
::= { hh3cAtmDxiPvcEntry 1 }
hh3cAtmDxiPvcVci OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of VCI. It can't be 0 if hh3cAtmDxiPvcVpi is 0."
::= { hh3cAtmDxiPvcEntry 2 }
hh3cAtmDxiPvcDFA OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of PVC. It is equal with vci and VPI. And this node value
is correlate with hh3cAtmDxiPvcVpi and hh3cAtmDxiPvcVci. "
::= { hh3cAtmDxiPvcEntry 3 }
hh3cAtmDxiPvcEncType OBJECT-TYPE
SYNTAX INTEGER
{
snap(1),
nlpid(2),
mux(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Encapsulation type of the frame."
DEFVAL { snap }
::= { hh3cAtmDxiPvcEntry 4 }
hh3cAtmDxiPvcMapCount OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of map. One map can only associate with one PVC, but
one PVC can associate with 32 maps. This node is the map count
which one PVC associated with."
::= { hh3cAtmDxiPvcEntry 5 }
hh3cAtmDxiPvcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Only support 'destroy' 'createAndGo' and 'active'."
::= { hh3cAtmDxiPvcEntry 6 }
hh3cAtmDxiMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cAtmDxiMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes PVC map information."
::= { hh3cAtmDxiIfObjects 2 }
hh3cAtmDxiMapEntry OBJECT-TYPE
SYNTAX Hh3cAtmDxiMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of hh3cAtmDxiMapTable."
INDEX { ifIndex,
hh3cAtmDxiMapPeerIpType,
hh3cAtmDxiMapPeerIp,
hh3cAtmDxiMapPvcVpi,
hh3cAtmDxiMapPvcVci,
hh3cAtmDxiMapType
}
::= { hh3cAtmDxiMapTable 1 }
Hh3cAtmDxiMapEntry ::=
SEQUENCE {
hh3cAtmDxiMapPeerIpType
InetAddressType,
hh3cAtmDxiMapPeerIp
InetAddress,
hh3cAtmDxiMapPvcVpi
Integer32,
hh3cAtmDxiMapPvcVci
Integer32,
hh3cAtmDxiMapType
INTEGER,
hh3cAtmDxiMapInarpTime
Integer32,
hh3cAtmDxiMapBroEnable
INTEGER,
hh3cAtmDxiMapRowStatus
RowStatus
}
hh3cAtmDxiMapPeerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of ip address: IPv4 or IPv6."
::= { hh3cAtmDxiMapEntry 1 }
hh3cAtmDxiMapPeerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The peer ip address. This ip address is the peer ip
address which the frame will arrive."
::= { hh3cAtmDxiMapEntry 2 }
hh3cAtmDxiMapPvcVpi OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VPI of PVC. It can't be 0 if hh3cAtmDxiMapPvcVci is 0."
::= { hh3cAtmDxiMapEntry 3 }
hh3cAtmDxiMapPvcVci OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VCI of PVC. It can't be 0 if hh3cAtmDxiMapPvcVpi is 0."
::= { hh3cAtmDxiMapEntry 4 }
hh3cAtmDxiMapType OBJECT-TYPE
SYNTAX INTEGER
{
address(1),
inarp(2),
default(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Pvc map type."
::= { hh3cAtmDxiMapEntry 5 }
hh3cAtmDxiMapInarpTime OBJECT-TYPE
SYNTAX Integer32 (0 | 5..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval time of inarp request. This node describes
the interval time inarp request frame sent. If the hh3cAtmDxiMapType
isn't inarp, this value is 0. Its unit is minute."
DEFVAL { 10 }
::= { hh3cAtmDxiMapEntry 6 }
hh3cAtmDxiMapBroEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether ATM-DXI map enable broadcast or not."
DEFVAL { 2 }
::= { hh3cAtmDxiMapEntry 7 }
hh3cAtmDxiMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Only support 'destroy', 'createAndGo' and 'active'."
::= { hh3cAtmDxiMapEntry 8 }
hh3cAtmDxiConformance OBJECT IDENTIFIER ::= { hh3cAtmDxi 3 }
hh3cAtmDxiCompliances OBJECT IDENTIFIER ::= { hh3cAtmDxiConformance 1 }
hh3cAtmDxiCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement."
MODULE
MANDATORY-GROUPS { hh3cPVCMAPGroup }
GROUP hh3cAtmDxiGeneralGroup
DESCRIPTION
"If ATM-DXI protocol supports other ATM-DXI modes,
this group must be supported."
::= { hh3cAtmDxiCompliances 1 }
hh3cAtmDxiGroup OBJECT IDENTIFIER ::= { hh3cAtmDxiConformance 2 }
hh3cPVCMAPGroup OBJECT-GROUP
OBJECTS { hh3cAtmDxiPvcDFA, hh3cAtmDxiPvcEncType, hh3cAtmDxiPvcMapCount,
hh3cAtmDxiPvcRowStatus, hh3cAtmDxiMapBroEnable, hh3cAtmDxiMapInarpTime,
hh3cAtmDxiMapRowStatus }
STATUS current
DESCRIPTION
"This group includes nodes which are associated with interface."
::= { hh3cAtmDxiGroup 1 }
hh3cAtmDxiGeneralGroup OBJECT-GROUP
OBJECTS { hh3cAtmDxiConfMode }
STATUS current
DESCRIPTION
"This group includes the general nodes about ATM-DXI."
::= { hh3cAtmDxiGroup 2 }
END