mibs/MIBS/comware/HH3C-DHCPRELAY-MIB

675 lines
26 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- =====================================================================
-- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: DHCP Relay MIB.
-- Reference:
-- Version: V1.1
-- History:
-- V1.0 2005-4-11 created by wumingyu
-- V1.1 2006-01-10 modified by xuyufei
-- Add hh3cDHCPRConfigOption82IfTable
-- =====================================================================
HH3C-DHCPRELAY-MIB DEFINITIONS ::= BEGIN
IMPORTS
TruthValue, RowStatus, MacAddress
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32
FROM SNMPv2-SMI
ifIndex
FROM RFC1213-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
hh3cCommon
FROM HH3C-OID-MIB;
-- ==================================================================
--
-- module identity part
--
-- ==================================================================
hh3cDhcpRelay MODULE-IDENTITY
LAST-UPDATED
"200506080000Z"
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION "DHCPR MIB"
REVISION
"200506080000Z"
DESCRIPTION
"The initial version of this MIB module."
::= { hh3cCommon 58 }
-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
hh3cDHCPRMibObject OBJECT IDENTIFIER ::= { hh3cDhcpRelay 1 }
--hh3cDHCPRIfSelectTable--
hh3cDHCPRIfSelectTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDHCPRIfSelectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for configuring relay mode
for interfaces.
"
::= { hh3cDHCPRMibObject 1 }
hh3cDHCPRIfSelectEntry OBJECT-TYPE
SYNTAX Hh3cDHCPRIfSelectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry for configuring relay mode for an
interface.
"
INDEX
{
ifIndex
}
::= { hh3cDHCPRIfSelectTable 1 }
Hh3cDHCPRIfSelectEntry ::=
SEQUENCE
{
hh3cDHCPRIfSelectRelayMode INTEGER
}
hh3cDHCPRIfSelectRelayMode OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If the value is on, the DHCP relay function
would be enabled on this interface.
"
DEFVAL { off }
::= { hh3cDHCPRIfSelectEntry 1 }
--hh3cDHCPRIpToGroupTable--
hh3cDHCPRIpToGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDHCPRIpToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for configuring ip addresses for DHCP
server groups.
"
::= { hh3cDHCPRMibObject 2 }
hh3cDHCPRIpToGroupEntry OBJECT-TYPE
SYNTAX Hh3cDHCPRIpToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry for configuring ip addresses for a DHCP
server group.
"
INDEX
{
hh3cDHCPRIpToGroupGroupId,
hh3cDHCPRIpToGroupServerIpType,
hh3cDHCPRIpToGroupServerIp
}
::= { hh3cDHCPRIpToGroupTable 1 }
Hh3cDHCPRIpToGroupEntry ::=
SEQUENCE
{
hh3cDHCPRIpToGroupGroupId Integer32,
hh3cDHCPRIpToGroupServerIpType InetAddressType,
hh3cDHCPRIpToGroupServerIp InetAddress,
hh3cDHCPRIpToGroupRowStatus RowStatus
}
hh3cDHCPRIpToGroupGroupId OBJECT-TYPE
SYNTAX Integer32 (0..19)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Group identifier of DHCP server group. "
::= { hh3cDHCPRIpToGroupEntry 1 }
hh3cDHCPRIpToGroupServerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ip address type of DHCP server. "
::= { hh3cDHCPRIpToGroupEntry 2 }
hh3cDHCPRIpToGroupServerIp OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ip address of DHCP server. "
::= { hh3cDHCPRIpToGroupEntry 3 }
hh3cDHCPRIpToGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy.
"
::= { hh3cDHCPRIpToGroupEntry 4 }
--hh3cDHCPRIfToGroupTable--
hh3cDHCPRIfToGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDHCPRIfToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for configuring DHCP server groups
for interfaces.
"
::= { hh3cDHCPRMibObject 3 }
hh3cDHCPRIfToGroupEntry OBJECT-TYPE
SYNTAX Hh3cDHCPRIfToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry for configuring DHCP server group for
an interface.
"
INDEX
{
ifIndex
}
::= { hh3cDHCPRIfToGroupTable 1 }
Hh3cDHCPRIfToGroupEntry ::=
SEQUENCE
{
hh3cDHCPRIfToGroupGroupId Integer32,
hh3cDHCPRIfToGroupRowStatus RowStatus
}
hh3cDHCPRIfToGroupGroupId OBJECT-TYPE
SYNTAX Integer32 (0..19)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DHCP server group for this interface. "
::= { hh3cDHCPRIfToGroupEntry 1 }
hh3cDHCPRIfToGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy"
::= { hh3cDHCPRIfToGroupEntry 2 }
--hh3cDHCPRAddrCheckTable--
hh3cDHCPRAddrCheckTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDHCPRAddrCheckEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the states of dhcp security address
check switchs for interfaces.
"
::= { hh3cDHCPRMibObject 4 }
hh3cDHCPRAddrCheckEntry OBJECT-TYPE
SYNTAX Hh3cDHCPRAddrCheckEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the state of dhcp security address
check switch for an interface.
"
INDEX
{
ifIndex
}
::= { hh3cDHCPRAddrCheckTable 1 }
Hh3cDHCPRAddrCheckEntry ::=
SEQUENCE
{
hh3cDHCPRAddrCheckSwitch INTEGER
}
hh3cDHCPRAddrCheckSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of dhcp security address check switch for
this interface.
It has two defined values: enabled and disabled.
If the value is enabled, the address check function
would be enabled. The default value is disabled.
"
DEFVAL { disabled }
::= { hh3cDHCPRAddrCheckEntry 1 }
--hh3cDHCPRSecurityTable--
hh3cDHCPRSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDHCPRSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing the information of
DHCP security.
"
::= { hh3cDHCPRMibObject 5 }
hh3cDHCPRSecurityEntry OBJECT-TYPE
SYNTAX Hh3cDHCPRSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing the information of
DHCP security.
"
INDEX
{
hh3cDHCPRSecurityClientIpAddrType,
hh3cDHCPRSecurityClientIpAddr
}
::= { hh3cDHCPRSecurityTable 1 }
Hh3cDHCPRSecurityEntry ::=
SEQUENCE
{
hh3cDHCPRSecurityClientIpAddrType InetAddressType,
hh3cDHCPRSecurityClientIpAddr InetAddress,
hh3cDHCPRSecurityClientMacAddr MacAddress,
hh3cDHCPRSecurityClientProperty INTEGER,
hh3cDHCPRSecurityClientRowStatus RowStatus
}
hh3cDHCPRSecurityClientIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DHCP client's net ip address type"
::= { hh3cDHCPRSecurityEntry 1 }
hh3cDHCPRSecurityClientIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DHCP client's net ip address"
::= { hh3cDHCPRSecurityEntry 2 }
hh3cDHCPRSecurityClientMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "DHCP client's mac address"
::= { hh3cDHCPRSecurityEntry 3 }
hh3cDHCPRSecurityClientProperty OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Property of client address"
::= { hh3cDHCPRSecurityEntry 4 }
hh3cDHCPRSecurityClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy"
::= { hh3cDHCPRSecurityEntry 5 }
--hh3cDHCPRStatisticsGroup--
hh3cDHCPRStatisticsGroup OBJECT IDENTIFIER ::= { hh3cDHCPRMibObject 6 }
hh3cDHCPRRxClientPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the packets received from DHCP
clients by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 1 }
hh3cDHCPRTxClientPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the brodcast packets transmitted
to DHCP clients by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 2 }
hh3cDHCPRRxServerPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the packets received from
DHCP Servers by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 3 }
hh3cDHCPRTxServerPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the packets transmitted to
DHCP Servers by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 4 }
hh3cDHCPRDiscoverPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Discover packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 5 }
hh3cDHCPRRequestPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Request packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 6 }
hh3cDHCPRDeclinePktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Decline packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 7 }
hh3cDHCPRReleasePktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Release packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 8 }
hh3cDHCPRInformPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Inform packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 9 }
hh3cDHCPROfferPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Offer packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 10 }
hh3cDHCPRAckPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Ack packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 11 }
hh3cDHCPRNakPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Nak packets handled
by DHCP relay.
"
::= { hh3cDHCPRStatisticsGroup 12 }
hh3cDHCPRStatisticsReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the packet
statistics.
"
::= { hh3cDHCPRStatisticsGroup 13 }
--hh3cDHCPRCycleGroup--
hh3cDHCPRCycleGroup OBJECT IDENTIFIER ::= { hh3cDHCPRMibObject 7 }
hh3cDHCPRCycleStatus OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If the value is on, the cycle function
would be enabled.
"
DEFVAL { off }
::= { hh3cDHCPRCycleGroup 1 }
--hh3cDHCPRConfigOption82Group--
hh3cDHCPRConfigOption82Group OBJECT IDENTIFIER ::= { hh3cDHCPRMibObject 8 }
hh3cDHCPROption82Switch OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If the value is enabled,
DHCP relay supporting option 82 function
would be enabled.
"
DEFVAL { disabled }
::= { hh3cDHCPRConfigOption82Group 1 }
hh3cDHCPROption82HandleStrategy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The strategies of DHCP relay handling option 82.
'drop' indicates DHCP relay discarding the request
packet including option 82.
'keep' indicates DHCP relay accepting the request
packet without any change of the option 82.
'replace' indicates DHCP relay accepting the
request packet on condition that it generates a new
option 82 to replace the original one.
"
DEFVAL { replace }
::= { hh3cDHCPRConfigOption82Group 2 }
hh3cDHCPRConfigOption82IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDHCPRConfigOption82IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing the information of DHCP
option 82.
This table depends on hh3cDHCPRIfToGroupTable.
An entry of this table will be created when
an entry of hh3cDHCPRIfToGroupTable is created.
"
::= { hh3cDHCPRConfigOption82Group 3 }
hh3cDHCPRConfigOption82IfEntry OBJECT-TYPE
SYNTAX Hh3cDHCPRConfigOption82IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing the information of
DHCP option 82.
"
INDEX
{
ifIndex
}
::= { hh3cDHCPRConfigOption82IfTable 1 }
Hh3cDHCPRConfigOption82IfEntry ::=
SEQUENCE
{
hh3cDHCPROption82IfSwitch INTEGER,
hh3cDHCPROption82IfStrategy INTEGER,
hh3cDHCPROption82IfFormat INTEGER,
hh3cDHCPROption82IfNodeType INTEGER,
hh3cDHCPROption82IfUsrDefString OCTET STRING
}
hh3cDHCPROption82IfSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If DHCP relay supports option 82 functions, the
value is 'enabled'.
If DHCP relay does not support option 82 functions,
the value is 'disabled'.
"
DEFVAL { disabled }
::= { hh3cDHCPRConfigOption82IfEntry 1 }
hh3cDHCPROption82IfStrategy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The strategies of DHCP relay handling option 82.
'drop' indicates DHCP relay discarding the request
packet including option 82.
'keep' indicates DHCP relay accepting the request
packet without any change of the option 82.
'replace' indicates DHCP relay accepting the
request packet on condition that it generates a new
option 82 to replace the original one.
"
DEFVAL { replace }
::= { hh3cDHCPRConfigOption82IfEntry 2 }
hh3cDHCPROption82IfFormat OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
verbose(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The format of DHCP relay option 82.
'normal' is the standard format.
'verbose' is the detailed format.
"
DEFVAL { normal }
::= { hh3cDHCPRConfigOption82IfEntry 3 }
hh3cDHCPROption82IfNodeType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
mac(2),
sysname(3),
userdefine(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Property of DHCP relay option 82 verbose format.
The value can be set by user only when the value
of hh3cDHCPROption82IfFormat is set with 'verbose'.
If the value of hh3cDHCPROption82IfFormat is
'normal', the value is automatically set with
'invalid'. the value can not be set with 'invalid'
by user.
'mac' indicates the option 82 verbose format is
filled in with the mac of DHCP relay input
interface. If the value of hh3cDHCPROption82IfFormat
is set with 'verbose', the value is automatically
set with 'mac'.
'sysname' indicates the option 82 verbose format
is filled in with the name of the DHCP relay.
'userdefine' indicates the option 82 verbose format
is filled in with the string defined by user.
If the value is set with 'userdefine', the value of
hh3cDHCPROption82IfUsrDefString must be set
simultaneously.
"
DEFVAL { invalid }
::= { hh3cDHCPRConfigOption82IfEntry 4 }
hh3cDHCPROption82IfUsrDefString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The string defined by user to fill in the
option 82 verbose format. If the value of
hh3cDHCPROption82IfFormat is 'normal', or the
value of hh3cDHCPROption82IfNodeType is 'mac'
or 'sysname', it is set with a null string
automatically and can not be modified by user.
It must be set with a non-zero length string
when the value of hh3cDHCPROption82IfNodeType
is set with 'userdefine'.
"
::= { hh3cDHCPRConfigOption82IfEntry 5 }
END