mibs/MIBS/comware/HH3C-DOT11-CFGEXT-MIB

286 lines
9.5 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- =============================================================================
-- Copyright (c) 2004-2016 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:
-- The file defines a MIB to provide WLAN configuration extended.
-- Reference:
-- Version: V1.3
-- History:
-- V1.0 2007-04-25 Initial version, created by shiyang (Richard)
-- V1.1 2008-07-17 Changed by chenwei
-- Add hh3cDot11LoadBalanceTrafficGap and
-- hh3cDot11LoadBalanceSessionGap to hh3cDot11LBGlobalGroup.
-- V1.2 2010-02-22 Changed by Wang Chunsheng
-- Add new table of hh3cDot11LBRadioGroupTable for hh3cDot11LoadBalance.
-- 2010-06-02 Changed by Yin Junjie
-- Add new node hh3cDot11LBTrafficThresKbps and
-- hh3cDot11LBTrafficGapKbps to hh3cDot11LBGlobalGroup.
-- V1.3 2016-03-11 add by yubo 04460
-- Add hh3cDot11LoadBalanceEnable to hh3cDot11LBGlobalGroup
-- =============================================================================
HH3C-DOT11-CFGEXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
TruthValue,
RowStatus
FROM SNMPv2-TC
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32
FROM SNMPv2-SMI
hh3cDot11
FROM HH3C-DOT11-REF-MIB;
hh3cDot11CFGEXT MODULE-IDENTITY
LAST-UPDATED "201603111800Z" -- Mar 11, 2016 at 18:00 GMT
ORGANIZATION
"New H3C Technologies Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R. China
Http://www.h3c.com
Zip:100085"
DESCRIPTION
"This MIB provides information for WLAN configuration extended.
The HH3C-DOT11-CFG-MIB define MIB objects for WLAN basic configuration,
while this MIB will define MIB objects for load balance these kinds
feature.
GLOSSARY
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
Access point (AP)
Transmitter/receiver (transceiver) device
that commonly connects and transports data
between a wireless network and a wired network.
Access control (AC)
To control and manage multi-APs, it will bridge
wireless and wired network.
Fat AP
Applied in the home, SOHO and so on, and it could
work independently without help from AC.
Fit AP
Applied in the enterprise environment, it will work
under the control and management from AC.
Control And Provisioning of Wireless Access Points Protocol
The short name of protocol is CAPWAP. AC will control
and manage AP by CAPWAP tunnel protocol defined by IETF.
Also, a data tunnel will be set up between AC and AP.
BSS
IEEE 802.11 Basic Service Set (Radio Cell). The
BSS of an AP comprises of the stations directly
associating with the AP.
Radio
The chip set to receive and send wireless signal.
Association
The service used to establish access point
or station mapping and enable station invocation
of the distribution system services.
(Wireless clients attempt to connect to
access points.)
Basic Rate
A data rate that is mandatory for client
devices to support in order for them to achieve
successful association.
MSDU
MAC Service Data Unit, it is frame format defined by
802.11.
TU
It is 1,024 microseconds (ms), which is about 1
millisecond.
AKM
The authentication and key management method defined by
802.11i, and which includes 802.1x and pre-shared key."
REVISION "201603111800Z" -- Mar 11, 2016 at 18:00 GMT
DESCRIPTION
"Modified to add new nodes."
REVISION "201006021400Z" -- Jun 02, 2010 at 14:00 GMT
DESCRIPTION
"Modified to add new nodes."
REVISION "200704252000Z" -- Apr. 25, 2007 at 20:00 GMT
DESCRIPTION
"The initial revision of this MIB module."
::= { hh3cDot11 6 }
-- *****************************************************************************
-- * Major sections
-- *****************************************************************************
-- Load Balancing Group
-- DEFINED AS "The group to provide the configuration information
-- for load balancing feature.
hh3cDot11LoadBalance OBJECT IDENTIFIER ::= { hh3cDot11CFGEXT 1 }
hh3cDot11LBGlobalGroup OBJECT IDENTIFIER ::= { hh3cDot11LoadBalance 1 }
-- *****************************************************************************
-- * hh3cDot11LBGlobalGroup Definition
-- *****************************************************************************
hh3cDot11LoadBalanceTrafficEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents whether enable load balancing according to station
traffic."
::= { hh3cDot11LBGlobalGroup 1 }
hh3cDot11LoadBalanceTrafficThres OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the threshold value for Traffic based load balancing."
::= { hh3cDot11LBGlobalGroup 2 }
hh3cDot11LoadBalanceSessionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents whether enable load balancing according to station
session number."
::= { hh3cDot11LBGlobalGroup 3 }
hh3cDot11LoadBalanceSessionThres OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the threshold value for session number based
load balancing."
::= { hh3cDot11LBGlobalGroup 4 }
hh3cDot11LoadBalanceTrafficGap OBJECT-TYPE
SYNTAX Integer32 (10..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Traffic gap threshold. Load balancing is carried out for a radio
when the traffic threshold and session gap are exceeded."
DEFVAL { 20 }
::= { hh3cDot11LBGlobalGroup 5 }
hh3cDot11LoadBalanceSessionGap OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Session gap threshold. Load balancing is carried out for a radio
when the session threshold and session gap are exceeded."
DEFVAL { 4 }
::= { hh3cDot11LBGlobalGroup 6 }
hh3cDot11LBTrafficThresKbps OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the threshold value for Traffic based load balancing."
::= { hh3cDot11LBGlobalGroup 7 }
hh3cDot11LBTrafficGapKbps OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Traffic gap threshold. Load balancing is carried out for a radio
when the traffic threshold gap are exceeded."
::= { hh3cDot11LBGlobalGroup 8 }
hh3cDot11LoadBalanceEnable OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
trafficBased(1),
userBased(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents whether to enable load balancing.
0 - none
1 - enable load balancing according to station traffic
2 - enable load balancing according to station session number."
DEFVAL { none }
::= { hh3cDot11LBGlobalGroup 9 }
-- *****************************************************************************
-- * End of hh3cDot11LBGlobalGroup Definition
-- *****************************************************************************
-- *****************************************************************************
-- * hh3cDot11LBRadioGroup Definition
-- *****************************************************************************
hh3cDot11LBRadioGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11LBRadioGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines load balance radio group."
::= { hh3cDot11LoadBalance 2 }
hh3cDot11LBRadioGroupEntry OBJECT-TYPE
SYNTAX Hh3cDot11LBRadioGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of one load balance radio group."
INDEX
{
hh3cDot11LBRadioGroupId
}
::= { hh3cDot11LBRadioGroupTable 1 }
Hh3cDot11LBRadioGroupEntry ::= SEQUENCE
{
hh3cDot11LBRadioGroupId Unsigned32,
hh3cDot11LBRadioGroupDesc OCTET STRING,
hh3cDot11LBRadioGroupRowStatus RowStatus
}
hh3cDot11LBRadioGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents load balance radio group ID."
::= { hh3cDot11LBRadioGroupEntry 1 }
hh3cDot11LBRadioGroupDesc OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the description of load balance radio group."
::= { hh3cDot11LBRadioGroupEntry 2 }
hh3cDot11LBRadioGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of this table entry."
::= { hh3cDot11LBRadioGroupEntry 3 }
-- *****************************************************************************
-- * End of hh3cDot11LBRadioGroup Definition
-- *****************************************************************************
END