mibs/MIBS/comware/HH3C-DOT11-WLANEXT-MIB

326 lines
11 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- =============================================================================
-- Copyright (C) 2006-2007 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:
-- The file defines a MIB to provide more information for WLAN network.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2007-06-08 Initial version, created by wanghao (Kumar)
-- =============================================================================
HH3C-DOT11-WLANEXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32
FROM SNMPv2-SMI
hh3cDot11,
Hh3cDot11ObjectIDType,
Hh3cDot11RadioScopeType,
Hh3cDot11QosAcType
FROM HH3C-DOT11-REF-MIB;
hh3cDot11WLANEXT MODULE-IDENTITY
LAST-UPDATED "200706082000Z" -- Jun. 08, 2007 at 20:00 GMT
ORGANIZATION
"New H3C Technologies Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip: 100085"
DESCRIPTION
"This MIB provides more information for WLAN network.
GLOSSARY
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
IEEE 802.11e
Standard to define the MAC procedures to support
LAN applications with Quality of Service (QoS) requirements,
including the transport of voice, audio and video over
IEEE 802.11 wireless LANs.
Access point (AP)
Transmitter/receiver (transceiver) device
that commonly connects and transports data
between a wireless network and a wired network.
Access control (AC)
To control and manage multi-APs, it will bridge
wireless and wired network.
Radio
The chip set to receive and send wireless signal.
Fat AP
Applied in the home, SOHO and so on, and it could
independently work without help from AC.
Fit AP
Applied in the enterprise environment, it will work
under the control and management from AC.
Control And Provisioning of Wireless Access Points Protocol
The short name of protocol is CAPWAP. AC will control
and manage AP by CAPWAP tunnel protocol defined by IETF.
Also, a data tunnel will be set up between AC and AP.
Basic Service Set
The IEEE 802.11 BSS of an AP comprises of the
stations directly associating with the AP. It will
be identified by BSSID."
REVISION "200706082000Z" -- Jun 08, 2007 at 20:00 GMT
DESCRIPTION
"The initial revision of this MIB module."
::= { hh3cDot11 7 }
-- *****************************************************************************
-- * Major sections
-- *****************************************************************************
-- RF Management Group
-- DEFINED AS "The group to provide the statistic information
-- for RF management feature.
hh3cDot11RFGroup OBJECT IDENTIFIER ::= { hh3cDot11WLANEXT 1 }
-- The RF Management Group has the following children:
-- hh3cDot11RFSignalStatisTable ::= { hh3cDot11RFGroup 1 }
-- Qos Group
-- DEFINED AS "The group to provide the statistic information
-- for Qos feature."
hh3cDot11QosGroup OBJECT IDENTIFIER ::= { hh3cDot11WLANEXT 2 }
-- The Qos Group has the following children:
-- hh3cDot11QosStatisTable ::= { hh3cDot11QosGroup 1 }
-- hh3cDot11QosAcStatisTable ::= { hh3cDot11QosGroup 2 }
-- *****************************************************************************
-- * hh3cDot11RFSignalStatisticTable Definition
-- *****************************************************************************
hh3cDot11RFSignalStatisTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RFSignalStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table will describe statistic information of signal strength
for AP radio."
::= { hh3cDot11RFGroup 1 }
hh3cDot11RFSignalStatisEntry OBJECT-TYPE
SYNTAX Hh3cDot11RFSignalStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the signal of each signal strength information of
a specific AP."
INDEX
{
hh3cDot11RFAPID,
hh3cDot11RFRadioID
}
::= { hh3cDot11RFSignalStatisTable 1 }
Hh3cDot11RFSignalStatisEntry ::= SEQUENCE
{
hh3cDot11RFAPID Hh3cDot11ObjectIDType,
hh3cDot11RFRadioID Hh3cDot11RadioScopeType,
hh3cDot11RFSignalStatisInterv Integer32,
hh3cDot11RFAverageSignalStrength Integer32,
hh3cDot11RFMaxSignalStrength Integer32,
hh3cDot11RFMinSignalStrength Integer32
}
hh3cDot11RFAPID OBJECT-TYPE
SYNTAX Hh3cDot11ObjectIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"To identify each AP, and AP is running status."
::= { hh3cDot11RFSignalStatisEntry 1 }
hh3cDot11RFRadioID OBJECT-TYPE
SYNTAX Hh3cDot11RadioScopeType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents each radio."
::= { hh3cDot11RFSignalStatisEntry 2 }
hh3cDot11RFSignalStatisInterv OBJECT-TYPE
SYNTAX Integer32
UNITS "second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the interval of statistic."
::= { hh3cDot11RFSignalStatisEntry 3 }
hh3cDot11RFAverageSignalStrength OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the average value of signal strength
for stations on a specific radio."
::= { hh3cDot11RFSignalStatisEntry 4 }
hh3cDot11RFMaxSignalStrength OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the maximum value of signal strength
for stations on a specific radio."
::= { hh3cDot11RFSignalStatisEntry 5 }
hh3cDot11RFMinSignalStrength OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the minimum value of signal strength
for stations on a specific radio."
::= { hh3cDot11RFSignalStatisEntry 6 }
-- *****************************************************************************
-- * End of hh3cDot11RFSignalStatisTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- * hh3cDot11QosStatisTable Definition
-- *****************************************************************************
hh3cDot11QosStatisTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11QosStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table defines the attributes for the Qos feature of radio."
::= { hh3cDot11QosGroup 1 }
hh3cDot11QosStatisEntry OBJECT-TYPE
SYNTAX Hh3cDot11QosStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of the Qos attribute of each radio."
INDEX
{
hh3cDot11QosAPID,
hh3cDot11QosRadioID
}
::= { hh3cDot11QosStatisTable 1 }
Hh3cDot11QosStatisEntry ::= SEQUENCE
{
hh3cDot11QosAPID Hh3cDot11ObjectIDType,
hh3cDot11QosRadioID Hh3cDot11RadioScopeType,
hh3cDot11QosAverageQueLen Integer32,
hh3cDot11QosDropFrameRatio Integer32,
hh3cDot11QosAverageDataRate Integer32
}
hh3cDot11QosAPID OBJECT-TYPE
SYNTAX Hh3cDot11ObjectIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"To uniquely identify a AP in running status."
::= { hh3cDot11QosStatisEntry 1 }
hh3cDot11QosRadioID OBJECT-TYPE
SYNTAX Hh3cDot11RadioScopeType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents each radio."
::= { hh3cDot11QosStatisEntry 2 }
hh3cDot11QosAverageQueLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average frame numbers to be sent out in the queue."
::= { hh3cDot11QosStatisEntry 3 }
hh3cDot11QosDropFrameRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of dropped frames in a minute because of full queue."
::= { hh3cDot11QosStatisEntry 4 }
hh3cDot11QosAverageDataRate OBJECT-TYPE
SYNTAX Integer32
UNITS "Kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average transmit data rate of radio."
::= { hh3cDot11QosStatisEntry 5 }
-- *****************************************************************************
-- * End of hh3cDot11QosStatisTable Definition
-- *****************************************************************************
-- *****************************************************************************
-- * hh3cDot11QosAcAttributeTable Definition
-- *****************************************************************************
hh3cDot11QosAcStatisTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11QosAcStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table defines the parameters for Qos access category."
::= { hh3cDot11QosGroup 2 }
hh3cDot11QosAcStatisEntry OBJECT-TYPE
SYNTAX Hh3cDot11QosAcStatisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of each Qos access category."
INDEX
{
hh3cDot11QosAPID,
hh3cDot11QosRadioID,
hh3cDot11QosAcType
}
::= { hh3cDot11QosAcStatisTable 1 }
Hh3cDot11QosAcStatisEntry ::= SEQUENCE
{
hh3cDot11QosAcType Hh3cDot11QosAcType,
hh3cDot11AcDropFrameCnt Counter32
}
hh3cDot11QosAcType OBJECT-TYPE
SYNTAX Hh3cDot11QosAcType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The access category type."
::= { hh3cDot11QosAcStatisEntry 1 }
hh3cDot11AcDropFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames in a minute for one specific access
category because of full queue."
::= { hh3cDot11QosAcStatisEntry 2 }
-- *****************************************************************************
-- * End of hh3cDot11AcAttributeTable Definition
-- *****************************************************************************
END