david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/comware/HH3C-DOT3-EFM-EPON-MIB

1269 lines
50 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--===========================================================
-- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved.
-- Description: This MIB is excerpted from the draft-ietf-hubmib-efm-epon-mib-02 directly
--- only changed the object name,added the hh3c as prefix.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 created by liyue.
-- Define MODULE-IDENTITY for hh3cDot3EfmeponMIB
--=================================================================
HH3C-DOT3-EFM-EPON-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cEpon
FROM HH3C-OID-MIB
MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
Integer32, OBJECT-IDENTITY
FROM SNMPv2-SMI
TruthValue, MacAddress
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
hh3cDot3EfmeponMIB MODULE-IDENTITY
LAST-UPDATED "200409210000Z" -- September 21, 2004
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"The objects in this MIB module are used to manage the
Ethernet in the First Mile (EFM) Multi Point Control
Protocol (MPCP) Interfaces as defined in IEEE Draft
P802.3ah/D3.0 clause 64,65.
The following reference is used throughout this MIB module:
[802.3ah] refers to:
IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements -
Part 3: Carrier sense multiple access with collision
detection (CSMA/CD) access method and physical layer
specifications - Media Access Control Parameters,
Physical Layers and Management Parameters for
subscriber access networks', 22 April 2004.
Of particular interest are Clause 64(MPCP) 65(P2MP RS) and
60 (PON PMDs). Clause 30, 'Management', and Clause 45,
'Management Data Input/Output (MDIO) Interface'.
Copyright (C) The Internet Society (2004). This version
of this MIB module is part of XXXX see the RFC itself for
full legal notices."
-- Editor's Note: Replace XXXX with the actual RFC number
-- assigned by RFC Editor and remove this note
REVISION "200409210000Z" -- September 21, 2004
DESCRIPTION "Initial version, published as RFC XXXX."
::= { hh3cEpon 2 }
-- Editor's Note: Replace XXX with a real OID once it is
-- assigned by IANA and remove this note.
-- Editor-s note: MPCP MIB modules definitions ([802.3ah]
--- clause 30.3.5)
-- Editor-s note: Description in attributes with References should be
-- minimized in later versions
hh3cDot3MpcpMIB OBJECT IDENTIFIER ::= { hh3cDot3EfmeponMIB 1 }
hh3cDot3MpcpObjects OBJECT IDENTIFIER ::= { hh3cDot3MpcpMIB 1 }
hh3cDot3MpcpConformance OBJECT IDENTIFIER ::= { hh3cDot3MpcpMIB 2 }
hh3cDot3MpcpTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot3MpcpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 Multi-Point Control Protocol (MPCP)
MIB modules."
::= { hh3cDot3MpcpObjects 1 }
hh3cDot3MpcpEntry OBJECT-TYPE
SYNTAX Hh3cDot3MpcpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 MPCP MIB modules table."
INDEX { ifIndex }
::= { hh3cDot3MpcpTable 1 }
Hh3cDot3MpcpEntry ::=
SEQUENCE {
hh3cDot3MpcpID Integer32,
hh3cDot3MpcpOperStatus TruthValue,
hh3cDot3MpcpMode INTEGER,
hh3cDot3MpcpLinkID Integer32,
hh3cDot3MpcpRemoteMACAddress MacAddress,
hh3cDot3MpcpRegistrationState INTEGER,
hh3cDot3MpcpTransmitElapsed Integer32,
hh3cDot3MpcpReceiveElapsed Integer32,
hh3cDot3MpcpRoundTripTime Integer32,
hh3cDot3MpcpMaximumPendingGrants Integer32,
hh3cDot3MpcpAdminState TruthValue,
hh3cDot3MpcpOnTime Integer32,
hh3cDot3MpcpOffTime Integer32,
hh3cDot3MpcpSyncTime Integer32
}
hh3cDot3MpcpID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is assigned so as to uniquely identify the
Multi-Point MAC Control (MPCP) entity, as defined in
[802.3ah] clause 64, among the subordinate managed
objects of the containing object.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.1."
::= { hh3cDot3MpcpEntry 1 }
hh3cDot3MpcpOperStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable can be used to define the operational
state of the Multi-Point MAC Control sublayer as
defined in [802.3ah] clause 64. Selecting admin for an
interface with Multi-Point MAC Control sublayer. When
the attribute is True the the interface will act as if
Multi-point control protocol is enabled. When the
attribute is False the interface will act as if it does
not have the Multi-point control protocol. The
operational state can be changed using the
hh3cDot3MpcpAdminState attribute.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.2."
::= { hh3cDot3MpcpEntry 2 }
hh3cDot3MpcpMode OBJECT-TYPE
SYNTAX INTEGER {
olt(1),
onu(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable can be used to identify the operational
state of the Multi-Point MAC Control sublayer as
defined in [802.3ah] clause 64. Selecting olt(1) for an
OLT (server) mode and onu(2) for an ONU (client) mode.
Writing can be done during only during initialization,
when hh3cDot3MpcpOperStatus indicates Flase.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.3."
DEFVAL { 1 }
::= { hh3cDot3MpcpEntry 3 }
hh3cDot3MpcpLinkID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the Logical Link
identity (LLID) associated with the MAC port as
specified in [802.3ah] clause 65.1.3.2.2.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.4."
::= { hh3cDot3MpcpEntry 4 }
hh3cDot3MpcpRemoteMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the source_address
parameter of the last MPCPDUs passed to the MAC Control.
This value is updated on reception of a valid frame with
(1) a destination Field equal to the reserved multicast
address for MAC Control specified in [802.3ah] Annex
31A, (2) lengthOrType field value equal to the reserved
Type for MAC Control as specified in [802.3ah] Annex
31A. (3) an MPCP subtype value equal to the subtype
reserved for MPCP as specified in [802.3ah] Annex 31A.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.5."
::= { hh3cDot3MpcpEntry 5 }
hh3cDot3MpcpRegistrationState OBJECT-TYPE
SYNTAX INTEGER {
unregistered(1),
registering(2),
registered(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that identifies the operational state
of the Multi-Point MAC Control sublayer as defined in
[802.3ah] clause 64. When this attribute has the
enumeration unregistered(1) the interface may be used
for registering a link partner. When this attribute has
the enumeration registering(2) the interface is in the
process of registering a link-partner. When this
attribute has the enumeration registered(3) the
interface has an established link-partner.
This attribute is relevant for an OLT and an ONU. For
the OLT it provides an indication per LLID."
REFERENCE "[802.3ah], 30.3.5.1.6."
::= { hh3cDot3MpcpEntry 6 }
hh3cDot3MpcpTransmitElapsed OBJECT-TYPE
SYNTAX Integer32
UNITS "TQ (16nsec)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that reports the interval from last
MPCP frame transmission in increments of Time Quanta
(TQ) 16ns. The value returned shall be (interval from
last MPCP frame transmission in ns)/16. If this value
exceeds (2^32-1) the value (2^32-1) shall be returned.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.19."
::= { hh3cDot3MpcpEntry 7 }
hh3cDot3MpcpReceiveElapsed OBJECT-TYPE
SYNTAX Integer32
UNITS "TQ (16nsec)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that reports the interval from last
MPCP frame reception in increments of Time Quanta (TQ)
16ns. The value returned shall be (interval from last
MPCP last MPCP frame reception in ns)/16. If this value
exceeds (2^32-1) the value (2^32-1) shall be returned.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.20."
::= { hh3cDot3MpcpEntry 8 }
hh3cDot3MpcpRoundTripTime OBJECT-TYPE
SYNTAX Integer32
UNITS "TQ (16nsec)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that reports the MPCP round trip time
in increments of Time Quanta (TQ) 16ns. The value
returned shall be (round trip time in ns)/16. If this
value exceeds (2^16-1) the value (2^16-1) shall be
returned. This attribute is relevant for an OLT and an
ONU. For the OLT there is a value per LLID"
REFERENCE "[802.3ah], 30.3.5.1.21."
::= { hh3cDot3MpcpEntry 9 }
hh3cDot3MpcpMaximumPendingGrants OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that indicates the maximum number of
grants an ONU can store. The maximum number of grants an
ONU can store has a range of 0 to 255.
This attribute is relevant for an OLT and an ONU. For
the OLT there is a value per LLID"
REFERENCE "[802.3ah], 30.3.5.1.24."
::= { hh3cDot3MpcpEntry 10 }
hh3cDot3MpcpAdminState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable can be used to define the operational
state of the Multi-Point MAC Control sublayer as defined
in [802.3ah] clause 64. Selecting admin for an interface
with Multi-Point MAC Control sublayer. When selecting
the value as True the interface Multi-Point control
protocol is enabled. When selecting the value as False
the interface acts as if the Multi-point Control
protocol does not exist. Reading reflects the state of
the attribute and the operation of the Multi-point
control protocol mode of the interface.
Writing can be done all the time.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.2.1."
DEFVAL { false }
::= { hh3cDot3MpcpEntry 11 }
hh3cDot3MpcpOnTime OBJECT-TYPE
SYNTAX Integer32
UNITS "TQ (16nsec)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that reports the -on time- for a grant
burst in increments of Time Quanta (TQ) 16ns as defined
in [802.3ah] 60,64. The value returned shall be (on time
ns)/16. If this value exceeds (2^32-1) the value
(2^32-1) shall be returned.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 64.3.5.1."
::= { hh3cDot3MpcpEntry 12 }
hh3cDot3MpcpOffTime OBJECT-TYPE
SYNTAX Integer32
UNITS "TQ (16nsec)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that reports the -off time- for a
grant burst in increments of Time Quanta (TQ) 16ns as
defined in [802.3ah] 60,64. The value returned shall be
(off time ns)/16. If this value exceeds (2^32-1) the
value (2^32-1) shall be returned.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 64.3.5.1."
::= { hh3cDot3MpcpEntry 13 }
hh3cDot3MpcpSyncTime OBJECT-TYPE
SYNTAX Integer32
UNITS "TQ (16nsec)"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that reports the -sync lock time- for
an OLT receiver in increments of Time Quanta (TQ) 16ns
as defined in [802.3ah] 60,64,65. The value returned
shall be (sync lock time ns)/16. If this value exceeds
(2^32-1) the value (2^32-1) shall be returned.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 64.3.3.2."
::= { hh3cDot3MpcpEntry 14 }
hh3cDot3MpcpStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot3MpcpStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the list of statistics counters of
[802.3ah] clause 64 MPCP interface."
::= { hh3cDot3MpcpObjects 2 }
hh3cDot3MpcpStatEntry OBJECT-TYPE
SYNTAX Hh3cDot3MpcpStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entries for table of statistics counters of
[802.3ah] clause 64 MPCP interface."
INDEX { ifIndex }
::= { hh3cDot3MpcpStatTable 1 }
Hh3cDot3MpcpStatEntry ::=
SEQUENCE {
hh3cDot3MpcpMACCtrlFramesTransmitted Counter32,
hh3cDot3MpcpMACCtrlFramesReceived Counter32,
hh3cDot3MpcpDiscoveryWindowsSent Counter32,
hh3cDot3MpcpDiscoveryTimeout Counter32,
hh3cDot3MpcpTxRegRequest Counter32,
hh3cDot3MpcpRxRegRequest Counter32,
hh3cDot3MpcpTxRegAck Counter32,
hh3cDot3MpcpRxRegAck Counter32,
hh3cDot3MpcpTxReport Counter32,
hh3cDot3MpcpRxReport Counter32,
hh3cDot3MpcpTxGate Counter32,
hh3cDot3MpcpRxGate Counter32,
hh3cDot3MpcpTxRegister Counter32,
hh3cDot3MpcpRxRegister Counter32,
hh3cDot3MpcpRxNotSupportedMPCP Counter32
}
hh3cDot3MpcpMACCtrlFramesTransmitted OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of MPCP frames passed to the MAC sublayer for
transmission. This counter is incremented when a
MA_CONTROL.request service primitive is generated within
the MAC control sublayer with an opcode indicating a
MPCP frame.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.7."
::= { hh3cDot3MpcpStatEntry 1 }
hh3cDot3MpcpMACCtrlFramesReceived OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of MPCP frames passed by the MAC sublayer to the
MAC Control sublayer. This counter is incremented when a
ReceiveFrame function call returns a valid frame with:
(1) a lengthOrType field value equal to the reserved
Type for 802.3_MAC_Control as specified in 31.4.1.3, and
(2) an opcode indicating a MPCP frame.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.8."
::= { hh3cDot3MpcpStatEntry 2 }
hh3cDot3MpcpDiscoveryWindowsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of discovery windows generated. The counter is
incremented by one for each generated discovery window.
This attribute is relevant for an OLT and an ONU. At the
ONU value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.22."
::= { hh3cDot3MpcpStatEntry 3 }
hh3cDot3MpcpDiscoveryTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a discovery timeout
occurs. Increment the counter by one for each discovery
processing state-machine reset resulting from timeout
waiting for message arrival.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.5.1.23."
::= { hh3cDot3MpcpStatEntry 4 }
hh3cDot3MpcpTxRegRequest OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REGISTER_REQ MPCP
frames transmission occurs. Increment the counter by one
for each REGISTER_REQ MPCP frame transmitted as defined
in [802.3ah] clause 64. This counter is mandatory for an
ONU. This attribute is relevant for an OLT and an ONU.
At the OLT value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.12."
::= { hh3cDot3MpcpStatEntry 5 }
hh3cDot3MpcpRxRegRequest OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REGISTER_REQ MPCP
frames reception occurs. A single counter at the ONU and
a set of counters, one for each LLID, at the OLT.
Increment the counter by one for each REGISTER_REQ MPCP
frame received for each LLID as defined in [802.3ah]
clause 64. This counter is mandatory for an ONU and for
an OLT. At the ONU value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.17."
::= { hh3cDot3MpcpStatEntry 6 }
hh3cDot3MpcpTxRegAck OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REGISTER_ACK MPCP
frames transmission occurs. Increment the counter by one
for each REGISTER_ACK MPCP frame transmitted as defined
in [802.3ah] clause 64. This counter is mandatory for an
ONU. This attribute is relevant for an OLT and an ONU.
At the OLT the value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.10."
::= { hh3cDot3MpcpStatEntry 7 }
hh3cDot3MpcpRxRegAck OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REGISTER_ACK MPCP
frames reception occurs. A single counter at the ONU and
a set of counters, one for each LLID, at the OLT.
Increment the counter by one for each REGISTER_ACK MPCP
frame received for each LLID, as defined in [802.3ah]
clause 64. This counter is mandatory for an ONU and for
an OLT. At the ONU the value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.15."
::= { hh3cDot3MpcpStatEntry 8 }
hh3cDot3MpcpTxReport OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REPORT MPCP frames
transmission occurs. Increment the counter by one for
each REPORT MPCP frame transmitted as defined in
[802.3ah] clause 64. This counter is mandatory for an
ONU. This attribute is relevant for an OLT and an ONU.
At the OLT value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.13."
::= { hh3cDot3MpcpStatEntry 9 }
hh3cDot3MpcpRxReport OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REPORT MPCP frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each REPORT MPCP frame received
for each LLID, as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and for an OLT.
At the ONU value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.18."
::= { hh3cDot3MpcpStatEntry 10 }
hh3cDot3MpcpTxGate OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a GATE MPCP frames
transmission occurs. A set of counters, one for each
LLID, at the OLT. Increment the counter by one for each
GATE MPCP frame transmitted, for each LLID, as defined
in [802.3ah] clause 64. This counter is mandatory for an
OLT. This attribute is relevant for an OLT and an ONU.
At the ONU the value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.9."
::= { hh3cDot3MpcpStatEntry 11 }
hh3cDot3MpcpRxGate OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a GATE MPCP frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID ,at the OLT. Increment
the counter by one for each GATE MPCP frame received,
for each LLID, as defined in [802.3ah] clause 64. This
counter is mandatory for an ONU and for an OLT. At the
OLT the value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.14."
::= { hh3cDot3MpcpStatEntry 12 }
hh3cDot3MpcpTxRegister OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REGISTER MPCP frames
transmission occurs. A set of counters, one for each
LLID, at the OLT. Increment the counter by one for each
REGISTER MPCP frame transmitted, for each LLID, as
defined in [802.3ah] clause 64. This counter is
mandatory for an OLT. This attribute is relevant for an
OLT and an ONU. At the ONU the value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.11."
::= { hh3cDot3MpcpStatEntry 13 }
hh3cDot3MpcpRxRegister OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a REGISTER MPCP frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each REGISTER MPCP frame
received, for each LLID, as defined in [802.3ah] clause
64. This counter is mandatory for an ONU and for an OLT.
at the OLT the value should be zero."
REFERENCE "[802.3ah], 30.3.5.1.16."
::= { hh3cDot3MpcpStatEntry 14 }
hh3cDot3MpcpRxNotSupportedMPCP OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a non-supported MPCP
frames reception occurs. A single counter at the ONU and
a set of counters, one for each LLID, at the OLT.
Increment the counter by one for each non-supported MPCP
frame received, for each LLID, as defined in [802.3ah]
clause 64. This counter is mandatory for an ONU and for
an OLT."
::= { hh3cDot3MpcpStatEntry 15 }
-- Conformance Statements
-- Conformance Groups
hh3cDot3MpcpGroups OBJECT IDENTIFIER ::= { hh3cDot3MpcpConformance 1 }
hh3cDot3MpcpGroupBase OBJECT-GROUP
OBJECTS {
hh3cDot3MpcpID,
hh3cDot3MpcpOperStatus,
hh3cDot3MpcpMode,
hh3cDot3MpcpLinkID,
hh3cDot3MpcpRemoteMACAddress,
hh3cDot3MpcpRegistrationState,
hh3cDot3MpcpMaximumPendingGrants,
hh3cDot3MpcpAdminState
}
STATUS current
DESCRIPTION
"A collection of objects of dot3 Mpcp Basic entity state
definition."
::= { hh3cDot3MpcpGroups 1 }
hh3cDot3MpcpGroupParam OBJECT-GROUP
OBJECTS {
hh3cDot3MpcpTransmitElapsed,
hh3cDot3MpcpReceiveElapsed,
hh3cDot3MpcpRoundTripTime,
hh3cDot3MpcpOnTime,
hh3cDot3MpcpOffTime,
hh3cDot3MpcpSyncTime
}
STATUS current
DESCRIPTION
"A collection of objects of dot3 Mpcp for P2MP
parameters."
::= { hh3cDot3MpcpGroups 2 }
hh3cDot3MpcpGroupStat OBJECT-GROUP
OBJECTS {
hh3cDot3MpcpMACCtrlFramesTransmitted,
hh3cDot3MpcpMACCtrlFramesReceived,
hh3cDot3MpcpDiscoveryWindowsSent,
hh3cDot3MpcpDiscoveryTimeout ,
hh3cDot3MpcpTxRegRequest,
hh3cDot3MpcpRxRegRequest,
hh3cDot3MpcpTxRegAck,
hh3cDot3MpcpRxRegAck,
hh3cDot3MpcpTxReport,
hh3cDot3MpcpRxReport,
hh3cDot3MpcpTxGate,
hh3cDot3MpcpRxGate,
hh3cDot3MpcpTxRegister,
hh3cDot3MpcpRxRegister,
hh3cDot3MpcpRxNotSupportedMPCP
}
STATUS current
DESCRIPTION
"A collection of objects of dot3 Mpcp Statistics"
::= { hh3cDot3MpcpGroups 3 }
-- Compliance
hh3cDot3MpcpCompliances OBJECT IDENTIFIER ::= { hh3cDot3MpcpConformance 2 }
hh3cDot3MpcpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for Multi-point
control protocol interfaces."
MODULE -- this module
MANDATORY-GROUPS { hh3cDot3MpcpGroupBase }
GROUP hh3cDot3MpcpGroupParam
DESCRIPTION "This group is mandatory for all MPCP supporting
interfaces for configuration of the Multipoint
Parameters."
GROUP hh3cDot3MpcpGroupStat
DESCRIPTION "This group is mandatory for all MPCP supporting
interfaces for Statistics collection."
::= { hh3cDot3MpcpCompliances 1 }
-- Editor-s note: OMPEmulation managed object definitions
hh3cDot3OmpEmulationMIB OBJECT IDENTIFIER ::= { hh3cDot3EfmeponMIB 2 }
hh3cDot3OmpEmulationObjects OBJECT IDENTIFIER ::= { hh3cDot3OmpEmulationMIB 1 }
hh3cDot3OmpeConformance OBJECT IDENTIFIER ::= { hh3cDot3OmpEmulationMIB 2 }
hh3cDot3OmpEmulationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot3OmpEmulationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 OmpEmulation MIB modules."
::= { hh3cDot3OmpEmulationObjects 1 }
hh3cDot3OmpEmulationEntry OBJECT-TYPE
SYNTAX Hh3cDot3OmpEmulationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 OmpEmulation MIB modules table."
INDEX { ifIndex }
::= { hh3cDot3OmpEmulationTable 1 }
Hh3cDot3OmpEmulationEntry ::=
SEQUENCE {
hh3cDot3OmpEmulationID Integer32,
hh3cDot3OmpEmulationType INTEGER
}
hh3cDot3OmpEmulationID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of hh3cDot3OmpEmulationID is assigned so as to
uniquely identify a OMPEmulation entity among the
subordinate managed objects of the containing object.
The value is mandated for an ONU."
REFERENCE "[802.3ah], 30.3.7.1.1."
::= { hh3cDot3OmpEmulationEntry 1 }
hh3cDot3OmpEmulationType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
olt(2),
onu(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that indicates that mode of operation
of the Reconciliation Sublayer for Point to Point
Emulation (see [802.3ah] clause 65.1). unknown(1) value
is assigned in initializing, true state or type not yet
known. olt(2) value is assigned when Sublayer operating
in OLT mode. onu(3) value is assigned when Sublayer
operating in ONU mode."
REFERENCE "[802.3ah], 30.3.7.1.2."
::= { hh3cDot3OmpEmulationEntry 2 }
hh3cDot3OmpEmulationStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot3OmpEmulationStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the list of statistics counters of
[802.3ah] clause 65 OMP interface."
::= { hh3cDot3OmpEmulationObjects 2 }
hh3cDot3OmpEmulationStatEntry OBJECT-TYPE
SYNTAX Hh3cDot3OmpEmulationStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entries for Table of statistics counters of
[802.3ah] clause 65 OMP interface."
INDEX { ifIndex }
::= { hh3cDot3OmpEmulationStatTable 1 }
Hh3cDot3OmpEmulationStatEntry ::=
SEQUENCE {
hh3cDot3OmpEmulationSLDErrors Counter32,
hh3cDot3OmpEmulationCRC8Errors Counter32,
hh3cDot3OmpEmulationBadLLID Counter32,
hh3cDot3OmpEmulationGoodLLID Counter32,
hh3cDot3OmpEmulationOnuPonCastLLID Counter32,
hh3cDot3OmpEmulationOltPonCastLLID Counter32,
hh3cDot3OmpEmulationBroadcastLLIDNotOnuID Counter32,
hh3cDot3OmpEmulationOnuLLIDNotBroadcast Counter32,
hh3cDot3OmpEmulationBroadcastLLIDPlusOnuId Counter32,
hh3cDot3OmpEmulationNotBroadcastLLIDNotOnuId Counter32
}
hh3cDot3OmpEmulationSLDErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that do not contain a valid
SLD field as defined in [802.3ah] clause 65.1.3.3.1.
This attribute is mandatory for an OLT and optional for
an ONU."
REFERENCE "[802.3ah], 30.3.7.1.3."
::= { hh3cDot3OmpEmulationStatEntry 1 }
hh3cDot3OmpEmulationCRC8Errors OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field, as defined in [802.3ah] clause 65.1.3.3.1, but do
not pass the CRC-8 check as defined in [802.3ah] clause
65.1.3.3.3. This attribute is mandatory for an OLT and
for an ONU."
REFERENCE "[802.3ah], 30.3.7.1.4."
::= { hh3cDot3OmpEmulationStatEntry 2 }
hh3cDot3OmpEmulationBadLLID OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field, as defined in [802.3ah] clause 65.1.3.3.1, and
pass the CRC-8 check, as defined in [802.3ah] clause
65.1.3.3.3, but are discarded due to the LLID check as
defined in [802.3ah] clause 65.1.3.3.2.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.7.1.8."
::= { hh3cDot3OmpEmulationStatEntry 3 }
hh3cDot3OmpEmulationGoodLLID OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field, as defined in [802.3ah] clause 65.1.3.3.1, and
pass the CRC-8 check, as defined in [802.3ah] clause
65.1.3.3.3.
This attribute is relevant for an OLT and an ONU."
REFERENCE "[802.3ah], 30.3.7.1.5."
::= { hh3cDot3OmpEmulationStatEntry 4 }
hh3cDot3OmpEmulationOnuPonCastLLID OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field in an ONU, as defined in [802.3ah] 65.1.3.3.1,
passes the CRC-8 check, as defined in [802.3ah]
65.1.3.3.3, and the frame meets the rule for acceptance
defined in [802.3ah] 65.1.3.3.2."
REFERENCE "[802.3ah], 30.3.7.1.6."
::= { hh3cDot3OmpEmulationStatEntry 5 }
hh3cDot3OmpEmulationOltPonCastLLID OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field in an OLT, as defined in [802.3ah] 65.1.3.3.1,
passes the CRC-8 check, as defined in [802.3ah]
65.1.3.3.3, and the frame meets the rule for acceptance
defined in [802.3ah] 65.1.3.3.2."
REFERENCE "[802.3ah], 30.3.7.1.7."
::= { hh3cDot3OmpEmulationStatEntry 6 }
hh3cDot3OmpEmulationBroadcastLLIDNotOnuID OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field in a OLT, as defined in [802.3ah] clause
65.1.3.3.1, and pass the CRC-8 check, as defined in
[802.3ah] clause 65.1.3.3.3, and contain broadcast LLID
as defined in [802.3ah] clause 65.
This attribute is mandatory for an OLT and for an ONU."
::= { hh3cDot3OmpEmulationStatEntry 7 }
hh3cDot3OmpEmulationOnuLLIDNotBroadcast OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field in a OLT, as defined in [802.3ah] clause
65.1.3.3.1, and pass the CRC-8 check, as defined in
[802.3ah] clause 65.1.3.3.3, and contain the ONU's LLID
as defined in [802.3ah] clause 65. This attribute is
mandatory for an ONU and mandatory for an OLT (a
counter per LLID)."
::= { hh3cDot3OmpEmulationStatEntry 8 }
hh3cDot3OmpEmulationBroadcastLLIDPlusOnuId OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field in a OLT, as defined in [802.3ah] clause
65.1.3.3.1, and pass the CRC-8 check, as defined in
[802.3ah] clause 65.1.3.3.3, and contain the broadcast
LLID plus ONU's LLID (frame reflected) as defined in
[802.3ah] clause 65. This attribute is mandatory for an
ONU and mandatory for an OLT (a counter per LLID)."
::= { hh3cDot3OmpEmulationStatEntry 9 }
hh3cDot3OmpEmulationNotBroadcastLLIDNotOnuId OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received that contain a valid SLD
field in a OLT, as defined in [802.3ah] clause
65.1.3.3.1, and pass the CRC-8 check, as defined in
[802.3ah] clause 65.1.3.3.3, and does not contain the
ONU's LLID as defined in [802.3ah] clause 65. This
attribute is mandatory for an ONU"
::= { hh3cDot3OmpEmulationStatEntry 10 }
-- Conformance Statements
-- Conformance Groups
hh3cDot3OmpeGroups OBJECT IDENTIFIER ::= { hh3cDot3OmpeConformance 1 }
hh3cDot3OmpeGroupID OBJECT-GROUP
OBJECTS {
hh3cDot3OmpEmulationID,
hh3cDot3OmpEmulationType
}
STATUS current
DESCRIPTION
"A collection of objects of dot3 OMP emulation ID entity
state definition."
::= { hh3cDot3OmpeGroups 1 }
hh3cDot3OmpeGroupStat OBJECT-GROUP
OBJECTS {
hh3cDot3OmpEmulationSLDErrors,
hh3cDot3OmpEmulationCRC8Errors,
hh3cDot3OmpEmulationBadLLID,
hh3cDot3OmpEmulationGoodLLID,
hh3cDot3OmpEmulationOnuPonCastLLID,
hh3cDot3OmpEmulationOltPonCastLLID,
hh3cDot3OmpEmulationBroadcastLLIDNotOnuID,
hh3cDot3OmpEmulationOnuLLIDNotBroadcast,
hh3cDot3OmpEmulationBroadcastLLIDPlusOnuId,
hh3cDot3OmpEmulationNotBroadcastLLIDNotOnuId
}
STATUS current
DESCRIPTION
"A collection of objects of dot3 OMP emulation
Statistics"
::= { hh3cDot3OmpeGroups 2 }
-- Compliance
hh3cDot3OmpeCompliances OBJECT IDENTIFIER ::= { hh3cDot3OmpeConformance 2 }
hh3cDot3OmpeCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for OMPEmulation
interfaces."
MODULE -- this module
MANDATORY-GROUPS { hh3cDot3OmpeGroupID }
GROUP hh3cDot3OmpeGroupStat
DESCRIPTION "This group is mandatory for all OMPemulation
supporting interfaces for Statistics collection."
::= { hh3cDot3OmpeCompliances 1 }
-- Editor-s note: MAU managed object definitions (30.5.1)
hh3cDot3EponMauMIB OBJECT IDENTIFIER ::= { hh3cDot3EfmeponMIB 3 }
hh3cDot3EponMauObjects OBJECT IDENTIFIER ::= { hh3cDot3EponMauMIB 1 }
hh3cDot3EponMauConformance OBJECT IDENTIFIER ::= { hh3cDot3EponMauMIB 2 }
hh3cDot3EponMauTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot3EponMauEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for dot3 MAU EPON MIB modules."
::= { hh3cDot3EponMauObjects 1 }
hh3cDot3EponMauEntry OBJECT-TYPE
SYNTAX Hh3cDot3EponMauEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot3 MAU EPON MIB modules table."
INDEX { ifIndex }
::= { hh3cDot3EponMauTable 1 }
Hh3cDot3EponMauEntry ::=
SEQUENCE {
hh3cDot3EponMauPCSCodingViolation Counter32,
hh3cDot3EponMauFecAbility INTEGER,
hh3cDot3EponMauFecMode INTEGER,
hh3cDot3EponMauFECCorrectedBlocks Counter32,
hh3cDot3EponMauFECUncorrectableBlocks Counter32,
hh3cDot3EponMauBufferHeadCodingViolation Counter32
}
hh3cDot3EponMauPCSCodingViolation OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For 100 Mb/ s operation it is a count of the number of
times an invalid code-group is received, other than the
/H/ code-group. For 1000 Mb/ s operation it is a count
of the number of times an invalid codegroup is received,
other than the /V/ code-group."
REFERENCE "[802.3ah], 30.5.1.1.12."
::= { hh3cDot3EponMauEntry 1 }
hh3cDot3EponMauFecAbility OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
nonsupported (2),
supported (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value that indicates the support of
operation of the 1000BASE-PX PHY optional FEC Sublayer
for Forward error correction see [802.3ah] clause 65.2).
unknown(1) value is assigned in initializing, for non
FEC support state or type not yet known. nonsupported(2)
value is assigned when Sublayer is not support.
supported(3) value is assigned when Sublayer is
supported."
REFERENCE "[802.3ah], 30.5.1.1.13."
::= { hh3cDot3EponMauEntry 2 }
hh3cDot3EponMauFecMode OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
disabled (2),
enabled (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A read-write value that indicates the mode of operation
of the 1000BASE-PX PHY optional FEC Sublayer for Forward
error correction see [802.3ah] clause 65.2).
A GET operation returns the current mode of operation
the PHY. A SET operation changes the mode of operation
of the PHY to the indicated value. unknown(1) value is
assigned in initializing, for non FEC support state or
type not yet known. disabled(2) value is assigned when
Sublayer operating in disabled mode. enabled(3) value is
assigned when Sublayer operating in FEC mode. writing
can be done all the time."
REFERENCE "[802.3ah], 30.5.1.1.14."
DEFVAL { 1 }
::= { hh3cDot3EponMauEntry 3 }
hh3cDot3EponMauFECCorrectedBlocks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count
of corrected FEC blocks. This counter will not increment
for other PHY Types. Increment the counter by one for
each received block that is corrected by the FEC
function in the PHY."
REFERENCE "[802.3ah], 30.5.1.1.15."
::= { hh3cDot3EponMauEntry 4 }
hh3cDot3EponMauFECUncorrectableBlocks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of
uncorrectable FEC blocks. This counter will not
increment for other PHY Types. Increment the counter by
one for each FEC block that is determined to be
uncorrectable by the FEC function in the PHY."
REFERENCE "[802.3ah], 30.5.1.1.16."
::= { hh3cDot3EponMauEntry 5 }
hh3cDot3EponMauBufferHeadCodingViolation OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For 1000 Mbps operation it is a counts of the number of
invalid code-group received directly from the link."
::= { hh3cDot3EponMauEntry 6 }
-- Defining EPON MAU types
-- Editor's Note: This section should be added to 802.3 MAU MIB
-- module RFC. Preference would be that the MAU MIB module
-- structure would change so that it is re-written as an
-- IANA-maintained module.
hh3cDot3EponMauType OBJECT IDENTIFIER ::= { hh3cDot3EponMauMIB 3 }
hh3cEponMauType1000BasePXOLT OBJECT-IDENTITY
STATUS current
DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65) OLT
(master), unknown PMD"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 1 }
hh3cEponMauType1000BasePXONU OBJECT-IDENTITY
STATUS current
DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65),ONU
(slave), unknown PMD"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 2 }
hh3cEponMauType1000BasePX10DOLT OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
OLT side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 3 }
hh3cEponMauType1000BasePX10DONU OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
ONU side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 4 }
hh3cEponMauType1000BasePX10UOLT OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
OLT side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 5 }
hh3cEponMauType1000BasePX10UONU OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
ONU side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 6 }
hh3cEponMauType1000BasePX20DOLT OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
OLT side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 7 }
hh3cEponMauType1000BasePX20DONU OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
ONU side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 8 }
hh3cEponMauType1000BasePX20UOLT OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
OLT side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 9 }
hh3cEponMauType1000BasePX20UONU OBJECT-IDENTITY
STATUS current
DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
ONU side"
REFERENCE "[802.3ah], 30.5.1.1.2."
::= { hh3cDot3EponMauType 10 }
-- Conformance Statements
-- Conformance Groups
hh3cDot3EponMauGroups OBJECT IDENTIFIER ::= { hh3cDot3EponMauConformance 1 }
hh3cDot3EponMauGroupAll OBJECT-GROUP
OBJECTS {
hh3cDot3EponMauPCSCodingViolation
}
STATUS current
DESCRIPTION
"A collection of objects of dot3 MAU definition."
::= { hh3cDot3EponMauGroups 1 }
hh3cDot3EponMauGroupFEC OBJECT-GROUP
OBJECTS {
hh3cDot3EponMauFecAbility,
hh3cDot3EponMauFecMode,
hh3cDot3EponMauFECCorrectedBlocks,
hh3cDot3EponMauFECUncorrectableBlocks,
hh3cDot3EponMauBufferHeadCodingViolation
}
STATUS current
DESCRIPTION
"A collection of objects of FEC group definition."
::= { hh3cDot3EponMauGroups 2 }
-- Compliance
hh3cDot3EponMauCompliances OBJECT IDENTIFIER ::= { hh3cDot3EponMauConformance 2 }
hh3cDot3EponMauCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for MAU EPON interfaces."
MODULE -- this module
MANDATORY-GROUPS { hh3cDot3EponMauGroupAll }
GROUP hh3cDot3EponMauGroupFEC
DESCRIPTION "This group is mandatory for all EPON MAU devices
Supporting FEC functionality as for Definitions and
BER Statistics collection."
::= { hh3cDot3EponMauCompliances 1 }
END
Reference in New Issue Copy Permalink