david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/comware/HH3C-EPON-DEVICE-MIB

1511 lines
63 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--===========================================================
-- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved.
-- Description: This MIB is excerpted from the draft-ietf-hubmib-efm-epon-mib-02 directly
--- only changed the object name,added the hh3c as prefix.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 created by liyue.
-- Define MODULE-IDENTITY for hh3cEponDeviceMIB
--=================================================================
HH3C-EPON-DEVICE-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cEpon
FROM HH3C-OID-MIB
MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
Unsigned32, Integer32, zeroDotZero
FROM SNMPv2-SMI
TruthValue, DateAndTime, RowStatus, MacAddress
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
hh3cEponDeviceMIB MODULE-IDENTITY
LAST-UPDATED "200409210000Z" -- September 21, 2004
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"The objects in this MIB module are used to manage
Ethernet Passive Optical Network (EPON) devices which
are based on the Ethernet in the First Mile (EFM) PON
as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65.
This MIB is excerpted from the draft files directly,only
changed the object name,added the hh3c as prefix.
The following reference is used throughout this MIB
module:
[802.3ah] refers to:
IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements -
Part 3: Carrier sense multiple access with collision
detection (CSMA/CD) access method and physical layer
specifications - Media Access Control Parameters,
Physical Layers and Management Parameters for subscriber
access networks', 22 April 2004.
Of particular interest are Clause 64(MPCP) 65(P2mP RS)
and 60 (PON PMDs). Clause 30, 'Management', and Clause
45,'Management Data Input/Output (MDIO) Interface'.
Copyright (C) The Internet Society (2004). This version
of this MIB module is part of XXXX see the RFC itself
for full legal notices."
-- Editor's Note: Replace XXXX with the actual RFC number
-- assigned by RFC Editor and remove this note
REVISION "200409210000Z" -- September 21, 2004
DESCRIPTION "Initial version, published as RFC XXXX."
::= { hh3cEpon 4 }
-- Editor's Note: Replace XXX with a real OID once it is
-- assigned by IANA and remove this note.
hh3cEponDeviceObjectMIB OBJECT IDENTIFIER ::= { hh3cEponDeviceMIB 1 }
hh3cEponDeviceObjects OBJECT IDENTIFIER ::= { hh3cEponDeviceObjectMIB 1 }
hh3cEponDeviceConformance OBJECT IDENTIFIER ::= { hh3cEponDeviceObjectMIB 2 }
hh3cEponDeviceControlObjects OBJECT IDENTIFIER ::= { hh3cEponDeviceObjects 1 }
hh3cEponDeviceStatObjects OBJECT IDENTIFIER ::= { hh3cEponDeviceObjects 2 }
hh3cEponDeviceEventObjects OBJECT IDENTIFIER ::= { hh3cEponDeviceObjects 3 }
hh3cEponDeviceControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cEponDeviceControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for EPON device MIB modules."
::= { hh3cEponDeviceControlObjects 1 }
hh3cEponDeviceControlEntry OBJECT-TYPE
SYNTAX Hh3cEponDeviceControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the EPON device Control table."
INDEX { ifIndex }
::= { hh3cEponDeviceControlTable 1 }
Hh3cEponDeviceControlEntry ::=
SEQUENCE {
hh3cEponDeviceObjectReset INTEGER,
hh3cEponDeviceObjectModes INTEGER,
hh3cEponDeviceObjectFecEnabled INTEGER,
hh3cEponDeviceObjectOamMode INTEGER,
hh3cEponDeviceObjectDeviceReadyMode INTEGER,
hh3cEponDeviceObjectPowerDown TruthValue,
hh3cEponDeviceObjectNumberOfLLIDs Integer32,
hh3cEponDeviceObjectReportThreshold Integer32,
hh3cEponDeviceRemoteMACAddressLLIDControl INTEGER
}
hh3cEponDeviceObjectReset OBJECT-TYPE
SYNTAX INTEGER {
running(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to reset the EPON device. The
interface may be unavailable while the reset occurs and
data may be lost. During reading operation it returns
the state of the EPON device. running(1) indicates and
operates normal operation, reset(2) indicates and
operates reset mode. Writing can be done all the time."
DEFVAL { 1 }
::= { hh3cEponDeviceControlEntry 1 }
hh3cEponDeviceObjectModes OBJECT-TYPE
SYNTAX INTEGER {
olt(1),
onu(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable defines the mode of the EPON device. When
an olt(1) it is an Optical Line Terminal device (server)
and when an onu(2) and Optical Network Unit device
(client)"
::= { hh3cEponDeviceControlEntry 2 }
hh3cEponDeviceObjectFecEnabled OBJECT-TYPE
SYNTAX INTEGER {
noFecEnabled (1),
fecTxEnabled (2),
fecRxEnabled (3),
fecTxRxEnabled (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines and provides information whether the
EPON device uses FEC as defined in the [802.3ah] clause
65.2 for EPON. When noFECEnabled(1) the device does not
support FEC mode When fecTxEnabled(2) the device supports
the FEC transmission mode. When fecRxEnabled(3) the device
supports the FEC Receive mode. When fecTxRxEnabled(4) the
device supports the FEC transmission and receive mode.
Writing can be done all the time.
This attribute is relevant for an OLT and an ONU."
DEFVAL { 1 }
::= { hh3cEponDeviceControlEntry 4 }
hh3cEponDeviceObjectOamMode OBJECT-TYPE
SYNTAX INTEGER {
noOam (1),
oamServer (2),
oamclient (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines and provides information on the
Operation Administration and Maintenance (OAM) mode of
an EPON device as defined by the [802.3ah] clause 57.
When noOam(1) the device does not supports the OAM mode.
When oamServer(2) the device supports the OAM mode as a
server unit. When oamClient(3) the device supports the
OAM mode as a client unit.
Writing can be done during initialization,
hh3cEponDeviceObjectDeviceReadyMode is in notReady(1) or
inProcess(2).
This attribute is relevant for an OLT and an ONU."
DEFVAL { 1 }
::= { hh3cEponDeviceControlEntry 5 }
hh3cEponDeviceObjectDeviceReadyMode OBJECT-TYPE
SYNTAX INTEGER {
notReady (1),
inProcess (2),
ready (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines the mode of an EPON device and
provides information on the mode in initialization -
ready for registration as defined by the [802.3ah]
clause 64.
When notReady(1) the device is not ready for operation.
When inProcess(2) the device is in initialization
process.
When ready(3) the device is ready for registration.
Writing can be done all the time.
This attribute is relevant for an OLT and an ONU."
DEFVAL { 1 }
::= { hh3cEponDeviceControlEntry 6 }
hh3cEponDeviceObjectPowerDown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this variable to True(1) will cause Device to be
entered into Power down mode where no registration is
allowed and only receiving data from the link.
Writing can be done all the time.
This attribute is relevant for an OLT and an ONU."
DEFVAL { false }
::= { hh3cEponDeviceControlEntry 7 }
hh3cEponDeviceObjectNumberOfLLIDs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read only variable which defines the number of
registered LLIDs (as defined by the [802.3ah] clause 65)
in a EPON network for an OLT and an ONU. Initialization
value is 0.
This attribute is relevant for an OLT and an ONU."
::= { hh3cEponDeviceControlEntry 8 }
hh3cEponDeviceObjectReportThreshold OBJECT-TYPE
SYNTAX Integer32
UNITS "TQ (16nsec)"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of 8 integers, for each LLID, that defines the
threshold reporting for each Queue in the REPORT
message, as defined in [802.3ah] 64. First Queue set
reporting will provide information on the queue
occupancy of frames below this Threshold. The value
returned shall be in Time quanta (TQ) which is 16nsec or
2 octets increments.
Writing can be done all the time.
This attribute is relevant for an OLT and an ONU."
DEFVAL { 0 }
::= { hh3cEponDeviceControlEntry 9 }
hh3cEponDeviceRemoteMACAddressLLIDControl OBJECT-TYPE
SYNTAX INTEGER {
none(1),
resetLog(2),
useDefaultReporting(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates and controls the resetting of the LLID MAC
address log. Setting this object to none(1) has no
action resetLog(2) empties the LLID MAC address log. All
data is deleted. Setting it to useDefaultReporting(3)
returns all entries priorities to their factory-default
reporting. Reading this object always returns
useDefaultReporting(3)."
DEFVAL { 3 }
::= { hh3cEponDeviceControlEntry 10 }
hh3cEponDeviceRemoteMACAddressLLIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cEponDeviceRemoteMACAddressLLIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of read-only value that identifies the
source_address and LLIDs parameter of the remote devices
in the network. This MacAddress value, as defined in
[802.3ah], 30.3.5.1.5, is updated on reception of a
valid frame with a unicast destination Field or
(1) a destination Field equal to the reserved multicast
address for MAC Control specified in [802.3ah] Annex
31A, (2) lengthOrType field value equal to the reserved
Type for MAC Control as specified in [802.3ah] Annex
31A. (3)an MPCP subtype value equal to the subtype
reserved for MPCP as specified in [802.3ah] Annex 31A,
and an LLID as allocated by the OLT. The table is
defined as Remote MAC address - LLID (RMadL)
The table is relevant only for an OLT device, and is
equivalent from a bridge emulation to the bridge
port-MAC address table where the LLIDs are equivalent to
virtual bridge ports."
::= { hh3cEponDeviceControlObjects 2 }
hh3cEponDeviceRemoteMACAddressLLIDEntry OBJECT-TYPE
SYNTAX Hh3cEponDeviceRemoteMACAddressLLIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A group of entries. Applications create and delete
entries using hh3cEponDeviceRMadlEntryStatus.
When adding objects to an LLID they are added in the
persistent order of their index in this table."
INDEX {ifIndex }
::= { hh3cEponDeviceRemoteMACAddressLLIDTable 1 }
Hh3cEponDeviceRemoteMACAddressLLIDEntry ::=
SEQUENCE {
hh3cEponDeviceRemoteMACAddressLLIDName SnmpAdminString,
hh3cEponDeviceRMadlLLID Unsigned32,
hh3cEponDeviceRMadlLogID OBJECT IDENTIFIER,
hh3cEponDeviceRMadlRemoteAddress MacAddress,
hh3cEponDeviceRMadlType INTEGER,
hh3cEponDeviceRMadlAction INTEGER,
hh3cEponDeviceRMadlEntryStatus RowStatus
}
hh3cEponDeviceRemoteMACAddressLLIDName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A locally-unique, administratively assigned name for a
group of entries."
::= { hh3cEponDeviceRemoteMACAddressLLIDEntry 1 }
hh3cEponDeviceRMadlLLID OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An arbitrary integer for the purpose of identifying the
LLID. Writing can be done all the time."
DEFVAL { 1 }
::= { hh3cEponDeviceRemoteMACAddressLLIDEntry 2 }
hh3cEponDeviceRMadlLogID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifier of a MIB module object to add to
an entry, indicating the entry ID in the table. Writing
can be done all the time."
DEFVAL { zeroDotZero }
::= { hh3cEponDeviceRemoteMACAddressLLIDEntry 3 }
hh3cEponDeviceRMadlRemoteAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote MAC address of the LLID.
Writing can be done all the time."
::= { hh3cEponDeviceRemoteMACAddressLLIDEntry 4 }
hh3cEponDeviceRMadlType OBJECT-TYPE
SYNTAX INTEGER {
notRegister (1),
registered (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A list of types for entries - LLIDs. Indicates and
defines the state of registration. notRegister(1) marks
a non registered LID, registered(2) marks a registered
LLID. Writing can be done all the time."
DEFVAL { 1 }
::= { hh3cEponDeviceRemoteMACAddressLLIDEntry 5 }
hh3cEponDeviceRMadlAction OBJECT-TYPE
SYNTAX INTEGER {
none (1),
register (2),
deregister (3),
reregister (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A list of actions for an entry - LLID. Indicates and
defines the state of registration for the remote device.
none(1) marks no action, register(2) marks to register
an LLID, deregister(3) marks to deregister an LLID,
reregister(4) marks reregistered LLID.
Writing can be done all the time."
DEFVAL { 1 }
::= { hh3cEponDeviceRemoteMACAddressLLIDEntry 6 }
hh3cEponDeviceRMadlEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows creation and deletion of
entries. Once made active an entry MAY not be modified
except to delete it."
::= { hh3cEponDeviceRemoteMACAddressLLIDEntry 7 }
--Statistics tables
hh3cEponDeviceStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cEponDeviceStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the list of statistics counters of
EPON devices. The attributes are relevant for an OLT and
an ONU."
::= { hh3cEponDeviceStatObjects 1 }
hh3cEponDeviceStatEntry OBJECT-TYPE
SYNTAX Hh3cEponDeviceStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entries for Table of statistics counters of EPON
devices."
INDEX { ifIndex }
::= { hh3cEponDeviceStatTable 1 }
Hh3cEponDeviceStatEntry ::=
SEQUENCE {
hh3cEponDeviceStatTxFramesQueue0 Counter32,
hh3cEponDeviceStatTxFramesQueue1 Counter32,
hh3cEponDeviceStatTxFramesQueue2 Counter32,
hh3cEponDeviceStatTxFramesQueue3 Counter32,
hh3cEponDeviceStatTxFramesQueue4 Counter32,
hh3cEponDeviceStatTxFramesQueue5 Counter32,
hh3cEponDeviceStatTxFramesQueue6 Counter32,
hh3cEponDeviceStatTxFramesQueue7 Counter32,
hh3cEponDeviceStatRxFramesQueue0 Counter32,
hh3cEponDeviceStatRxFramesQueue1 Counter32,
hh3cEponDeviceStatRxFramesQueue2 Counter32,
hh3cEponDeviceStatRxFramesQueue3 Counter32,
hh3cEponDeviceStatRxFramesQueue4 Counter32,
hh3cEponDeviceStatRxFramesQueue5 Counter32,
hh3cEponDeviceStatRxFramesQueue6 Counter32,
hh3cEponDeviceStatRxFramesQueue7 Counter32,
hh3cEponDeviceStatDroppedFramesQueue0 Counter32,
hh3cEponDeviceStatDroppedFramesQueue1 Counter32,
hh3cEponDeviceStatDroppedFramesQueue2 Counter32,
hh3cEponDeviceStatDroppedFramesQueue3 Counter32,
hh3cEponDeviceStatDroppedFramesQueue4 Counter32,
hh3cEponDeviceStatDroppedFramesQueue5 Counter32,
hh3cEponDeviceStatDroppedFramesQueue6 Counter32,
hh3cEponDeviceStatDroppedFramesQueue7 Counter32
}
hh3cEponDeviceStatTxFramesQueue0 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-0- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-0-.
The -Queue-0- marking matched the REPORT MPCP message
Queue-0 field, as defined in [802.3ah] clause 64. This
counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 1 }
hh3cEponDeviceStatTxFramesQueue1 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-1- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-1-.
The -Queue-1- marking matched the REPORT MPCP message
Queue-1 field, as defined in [802.3ah] clause 64. This
counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 2 }
hh3cEponDeviceStatTxFramesQueue2 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-2- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-2-.
The -Queue-2- marking matched the REPORT MPCP message
Queue-2 field, as defined in [802.3ah] clause 64. This
counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 3 }
hh3cEponDeviceStatTxFramesQueue3 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-3- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-3-.
The -Queue-3- marking matched the REPORT MPCP message
Queue-3 field, as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 4 }
hh3cEponDeviceStatTxFramesQueue4 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-4- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-4-.
The -Queue-4- marking matched the REPORT MPCP message
Queue-4 field, as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 5 }
hh3cEponDeviceStatTxFramesQueue5 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-5- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-5-.
The -Queue-5- marking matched the REPORT MPCP message
Queue-5 field, as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 6 }
hh3cEponDeviceStatTxFramesQueue6 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-6- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-6-.
The -Queue-6- marking matched the REPORT MPCP message
Queue-6 field, as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 7 }
hh3cEponDeviceStatTxFramesQueue7 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-7- frames
transmission occurs. Increment the counter by one for
each frame transmitted which is an output of -Queue-7-.
The -Queue-7- marking matched the REPORT MPCP message
Queue-7 field, as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 8 }
hh3cEponDeviceStatRxFramesQueue0 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-0- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-0-. The -Queue-0-
marking matched the REPORT MPCP message Queue-0 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 9 }
hh3cEponDeviceStatRxFramesQueue1 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-1- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-1-. The -Queue-1-
marking matched the REPORT MPCP message Queue-1 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 10 }
hh3cEponDeviceStatRxFramesQueue2 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-2- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-2-. The -Queue-2-
marking matched the REPORT MPCP message Queue-2 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 11 }
hh3cEponDeviceStatRxFramesQueue3 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-3- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-3-. The -Queue-3-
marking matched the REPORT MPCP message Queue-3 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 12 }
hh3cEponDeviceStatRxFramesQueue4 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-4- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-4-. The -Queue-4-
marking matched the REPORT MPCP message Queue-4 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 13 }
hh3cEponDeviceStatRxFramesQueue5 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-5- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-5-. The -Queue-5-
marking matched the REPORT MPCP message Queue-5 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 14 }
hh3cEponDeviceStatRxFramesQueue6 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-6- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-6-. The -Queue-6-
marking matched the REPORT MPCP message Queue-6 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 15 }
hh3cEponDeviceStatRxFramesQueue7 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-7- frames
reception occurs. A single counter at the ONU and a set
of counters, one for each LLID, at the OLT. Increment
the counter by one for each frame received for each
LLID, which is an output of -Queue-7-. The -Queue-7-
marking matched the REPORT MPCP message Queue-7 field,
as defined in [802.3ah] clause 64.
This counter is mandatory for an ONU and an OLT."
::= { hh3cEponDeviceStatEntry 16 }
hh3cEponDeviceStatDroppedFramesQueue0 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-0- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-0-. The -Queue-0- marking matched
the REPORT MPCP message Queue-0 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 17 }
hh3cEponDeviceStatDroppedFramesQueue1 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-1- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-1-. The -Queue-1- marking matched
the REPORT MPCP message Queue-1 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 18 }
hh3cEponDeviceStatDroppedFramesQueue2 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-2- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-2-. The -Queue-2- marking matched
the REPORT MPCP message Queue-2 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 19 }
hh3cEponDeviceStatDroppedFramesQueue3 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-3- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-3-. The -Queue-3- marking matched
the REPORT MPCP message Queue-3 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 20}
hh3cEponDeviceStatDroppedFramesQueue4 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-4- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-4-. The -Queue-4- marking matched
the REPORT MPCP message Queue-4 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 21 }
hh3cEponDeviceStatDroppedFramesQueue5 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-5- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-5-. The -Queue-5- marking matched
the REPORT MPCP message Queue-5 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 22 }
hh3cEponDeviceStatDroppedFramesQueue6 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-6- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-6-. The -Queue-6- marking matched
the REPORT MPCP message Queue-6 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 23 }
hh3cEponDeviceStatDroppedFramesQueue7 OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times a -Queue-7- frames drops
occurs. Increment the counter by one for each frame
dropped from -Queue-7-. The -Queue-7- marking matched
the REPORT MPCP message Queue-7 field, as defined in
[802.3ah] clause 64.
This counter is mandatory for an ONU."
::= { hh3cEponDeviceStatEntry 24 }
--Editor's Note use reference to event MIB modules [RFC2981] and
--docsis MIB modules [RFC2669]
hh3cEponDeviceEventObjectTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cEponDeviceEventObjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the Event Objects for EPON devices.
The attributes are relevant for an OLT and an ONU."
::= { hh3cEponDeviceEventObjects 1 }
hh3cEponDeviceEventObjectEntry OBJECT-TYPE
SYNTAX Hh3cEponDeviceEventObjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entries for Table of Event objects for EPON
devices."
INDEX { ifIndex }
::= { hh3cEponDeviceEventObjectTable 1 }
Hh3cEponDeviceEventObjectEntry ::=
SEQUENCE {
hh3cEponDeviceSampleMinimum Integer32,
hh3cEponDeviceDyingGaspAlarmState TruthValue,
hh3cEponDeviceDyingGaspAlarmEnabled TruthValue,
hh3cEponDeviceCriticalEventState TruthValue,
hh3cEponDeviceCriticalEventEnabled TruthValue,
hh3cEponDeviceLocalLinkFaultAlarmState TruthValue,
hh3cEponDeviceLocalLinkFaultAlarmEnabled TruthValue,
hh3cEponDeviceTemperatureEventIndicationState TruthValue,
hh3cEponDeviceTemperatureEventIndicationEnabled TruthValue,
hh3cEponDevicePowerVoltageEventIndicationState TruthValue,
hh3cEponDevicePowerVoltageEventIndicationEnabled TruthValue,
hh3cEponDeviceGlobalEventState TruthValue,
hh3cEponDeviceGlobalEventEnabled TruthValue,
hh3cEponDeviceErroredSymbolPeriodEventState TruthValue,
hh3cEponDeviceErroredSymbolPeriodEventEnabled TruthValue,
hh3cEponDeviceErroredFrameEventState TruthValue,
hh3cEponDeviceErroredFrameEventEnabled TruthValue,
hh3cEponDeviceErroredFramePeriodEventState TruthValue,
hh3cEponDeviceErroredFramePeriodEventEnabled TruthValue,
hh3cEponDeviceErroredFrameSecondsSummaryEventState TruthValue,
hh3cEponDeviceErroredFrameSecondsSummaryEventEnabled TruthValue,
hh3cEponDeviceOrganizationSpecificEventState TruthValue,
hh3cEponDeviceOrganizationSpecificEventEnabled TruthValue,
hh3cEponDeviceEventControl INTEGER
}
hh3cEponDeviceSampleMinimum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum Frequency of events this system will accept.
A system may use the larger values of this minimum to
lessen the impact of constant sampling. For larger
sampling intervals the system samples less often and
suffers less overhead.
Unless explicitly resource limited, a system's value for
this object SHOULD be 1, allowing as small as a 1 second
interval for ongoing trigger sampling.
Writing of the value can be done all the time."
DEFVAL { 1 }
::= { hh3cEponDeviceEventObjectEntry 1 }
hh3cEponDeviceDyingGaspAlarmState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Dying Gasp indication of the OAM alarm indications as
described in the [802.3ah] clause 57. When true the
device has a dying gasp alarm asserted. When false the
dying gasp alarm is reset "
::= { hh3cEponDeviceEventObjectEntry 2 }
hh3cEponDeviceDyingGaspAlarmEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow DyingGaspAlarm event to be used.
When the value is true the event is sampled. When the
value is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 3 }
hh3cEponDeviceCriticalEventState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Critical Event indication of the OAM alarm indications
as described in the [802.3ah] clause 57. When true the
device has a Critical Event asserted. When false the
Critical Event is reset."
::= { hh3cEponDeviceEventObjectEntry 4 }
hh3cEponDeviceCriticalEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow CriticalEvent event to be used. When
the value is true the event is sampled. When the value
is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 5 }
hh3cEponDeviceLocalLinkFaultAlarmState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Local Link Fault indication of the OAM alarm indications
as described in the [802.3ah] clause 57. When true the
device has a Local Link Fault alarm asserted. When
false the Local Link Fault alarm is reset."
::= { hh3cEponDeviceEventObjectEntry 6 }
hh3cEponDeviceLocalLinkFaultAlarmEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow LocalLinkFaultAlarm event to be used.
When the value is true the event is sampled. When the
value is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 7 }
hh3cEponDeviceTemperatureEventIndicationState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Temperature Event indication of an EPON device. When
condition of box temperature is above the threshold
defined the alarm is asserted. When the condition is
below that threshold the alarm is de-asserted. When true
the device has a Temperature Event Indication asserted.
When false the Temperature Event Indication is reset."
::= { hh3cEponDeviceEventObjectEntry 8 }
hh3cEponDeviceTemperatureEventIndicationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow TemperatureEventIndication event to
be used. When the value is true the event is sampled.
When the value is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 9 }
hh3cEponDevicePowerVoltageEventIndicationState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Power/Voltage Event Indication of an EPON device. When
condition of box Power/voltage is above the threshold
defined the alarm is asserted. When the condition is
below that threshold the alarm is de-asserted. When true
the device has a Power/Voltage Event Indication
asserted. When false the Power/Voltage Event Indication
is reset. "
::= { hh3cEponDeviceEventObjectEntry 10 }
hh3cEponDevicePowerVoltageEventIndicationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow PowerVoltageEventIndication event to
be used. When the value is true the event is sampled.
When the value is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 11 }
hh3cEponDeviceGlobalEventState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Global Event indication of an EPON device. When the
indication of the event input occurs the event is
asserted. When the input is removed that event is
de-asserted. When true the device has a Global Event
asserted. When false the Global Event Indication is
reset."
::= { hh3cEponDeviceEventObjectEntry 12 }
hh3cEponDeviceGlobalEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow GlobalEvent event to be used. When
the value is true the event is sampled. When the value
is false the event is not sampled. Writing can be done
all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 13 }
hh3cEponDeviceErroredSymbolPeriodEventState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Errored Symbol Period Event indication of the OAM alarm
TLV indications as described in the [802.3ah]
clause 57.5.3. When true the device has an Errored
Symbol Period Event asserted. When false the Errored
Symbol Period Event is reset."
::= { hh3cEponDeviceEventObjectEntry 14 }
hh3cEponDeviceErroredSymbolPeriodEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow ErroredSymbolPeriodEvent event to be
used. When the value is true the event is sampled. When
the value is false the event is not sampled. Writing can
be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 15 }
hh3cEponDeviceErroredFrameEventState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Errored Frame Event indication of the OAM alarm TLV
indications as described in the [802.3ah] clause 57.5.3.
When true the device has an Errored Frame Event
asserted. When false the Errored Frame Event is reset."
::= { hh3cEponDeviceEventObjectEntry 16 }
hh3cEponDeviceErroredFrameEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow ErroredFrameEvent event to be used.
When the value is true the event is sampled. When the
value is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 17 }
hh3cEponDeviceErroredFramePeriodEventState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Errored Frame Period Event indication of the OAM alarm
TLV indications as described in the [802.3ah] clause
57.5.3. When true the device has an Errored Frame Period
Event asserted. When false the Errored Frame Period
Event is reset."
::= { hh3cEponDeviceEventObjectEntry 18 }
hh3cEponDeviceErroredFramePeriodEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow ErroredFramePeriodEvent event to be
used. When the value is true the event is sampled. When
the value is false the event is not sampled. Writing can
be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 19 }
hh3cEponDeviceErroredFrameSecondsSummaryEventState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Errored Frame Seconds Summary Event indication of the
OAM alarm TLV indications as described in the [802.3ah]
clause 57.5.3. When true the device has an Errored Frame
Seconds Summary Event asserted. When false the Errored
Frame Seconds Summary Event is reset."
::= { hh3cEponDeviceEventObjectEntry 20 }
hh3cEponDeviceErroredFrameSecondsSummaryEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow ErroredFrameSecondsSummaryEvent event
to be used. When the value is true the event is sampled.
When the value is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 21 }
hh3cEponDeviceOrganizationSpecificEventState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only variable, which defines the state of the
Organization Specific Event indication of the OAM alarm
TLV indications as described in the [802.3ah] clause
57.5.3. When true the device has an Organization
Specific Event asserted. When false the Organization
Specific Event is reset."
::= { hh3cEponDeviceEventObjectEntry 22 }
hh3cEponDeviceOrganizationSpecificEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control to allow OrganizationSpecificEvent event to be
used. When the value is true the event is sampled. When
the value is false the event is not sampled.
Writing can be done all the time."
DEFVAL { false }
::= { hh3cEponDeviceEventObjectEntry 23 }
hh3cEponDeviceEventControl OBJECT-TYPE
SYNTAX INTEGER {
none(1),
resetLog(2),
useDefaultReporting(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates and controls the resetting of the Event log.
Setting this object to none(1) has no action resetLog(2)
empties the event log. All data is deleted. Setting it
to useDefaultReporting(3) returns all event priorities
to their factory-default reporting. Reading this object
always returns useDefaultReporting(3)."
DEFVAL { 3 }
::= { hh3cEponDeviceEventObjectEntry 24 }
-- Events Log Table
hh3cEponDeviceEventsLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cEponDeviceEventsLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects provides a log of notification based
on the event as pointed to by entries in those tables.
The intent is a MAC level event log (set of events to
when they happened).
This attribute is relevant for an OLT and an ONU."
::= { hh3cEponDeviceEventObjects 2 }
hh3cEponDeviceEventsLogEntry OBJECT-TYPE
SYNTAX Hh3cEponDeviceEventsLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A group of Events. Applications create and delete
entries using hh3cEponDeviceEventsEntryStatus. When adding
objects to a notification they are added in the lexical
order of their index in this table."
INDEX { hh3cEponDeviceEventsLogName, hh3cEponDeviceEventsLogIndex }
::= { hh3cEponDeviceEventsLogTable 1 }
Hh3cEponDeviceEventsLogEntry ::=
SEQUENCE {
hh3cEponDeviceEventsLogName SnmpAdminString,
hh3cEponDeviceEventsLogIndex Unsigned32,
hh3cEponDeviceEventsLogID OBJECT IDENTIFIER,
hh3cEponDeviceEventsLogFirstTime DateAndTime,
hh3cEponDeviceEventsLogLastTime DateAndTime,
hh3cEponDeviceEventsLogCounts Counter32,
hh3cEponDeviceEventsLogType INTEGER,
hh3cEponDeviceEventsLogEntryStatus RowStatus
}
hh3cEponDeviceEventsLogName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally-unique, administratively assigned name for a
group of Events."
::= { hh3cEponDeviceEventsLogEntry 1 }
hh3cEponDeviceEventsLogIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer for the purpose of identifying
individual Events within a hh3cEponDeviceEventsLogName
group. Events within a group are placed in the
notification in the numerical order of this index."
::= { hh3cEponDeviceEventsLogEntry 2 }
hh3cEponDeviceEventsLogID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifier of a MIB module object to add to a
Notification that results from the event.
Writing can be done all the time."
DEFVAL { zeroDotZero }
::= { hh3cEponDeviceEventsLogEntry 3 }
hh3cEponDeviceEventsLogFirstTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that an entry was created."
::= { hh3cEponDeviceEventsLogEntry 4 }
hh3cEponDeviceEventsLogLastTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If multiple events are reported via the same entry, the
time that the last event for this entry occurred,
otherwise this should have the same value as
hh3cEponDeviceEventsLogFirstTime."
::= { hh3cEponDeviceEventsLogEntry 5 }
hh3cEponDeviceEventsLogCounts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of consecutive event instances reported by
this entry. This starts at 1 with the creation of this
row and increments by 1 for each subsequent duplicate
event."
::= { hh3cEponDeviceEventsLogEntry 6 }
hh3cEponDeviceEventsLogType OBJECT-TYPE
SYNTAX INTEGER {
hh3cEponDeviceDyingGaspAlarmState (1),
hh3cEponDeviceCriticalEventState (2),
hh3cEponDeviceLocalLinkFaultAlarmState (3),
hh3cEponDeviceTemperatureEventIndicationState (4),
hh3cEponDevicePowerVoltageEventIndicationState (5),
hh3cEponDeviceGlobalEventState (6),
hh3cEponDeviceErroredSymbolPeriodEventState (7),
hh3cEponDeviceErroredFrameEventState (8),
hh3cEponDeviceErroredFramePeriodEventState (9),
hh3cEponDeviceErroredFrameSecondsSummaryEventState (10),
hh3cEponDeviceOrganizationSpecificEventState (11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of types for Events. Events are ordered according
to their significance where 1 is the highest severity.
hh3cEponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp
Alarm State,
hh3cEponDeviceCriticalEventState(2) indicates a Critical
Event State,
hh3cEponDeviceLocalLinkFaultAlarmState(3) indicates a Local
Link Fault Alarm State,
hh3cEponDeviceTemperatureEventIndicationState(4) indicates a
Temperature Event Indication State,
hh3cEponDevicePowerVoltageEventIndicationState(5) indicates
a Power Voltage Event Indication State,
hh3cEponDeviceGlobalEventState(6) indicates a Global Event
State,
hh3cEponDeviceErroredSymbolPeriodEventState(7) indicates an
Errored Symbol Period Event State,
hh3cEponDeviceErroredFrameEventState(8) indicates an Errored
Frame Event State,
hh3cEponDeviceErroredFramePeriodEventState(9) indicates an
Errored Frame Period Event State,
hh3cEponDeviceErroredFrameSecondsSummaryEventState(10)
indicates an Errored Frame Seconds Summary Event State,
hh3cEponDeviceOrganizationSpecificEventState(11) indicates
an Organization Specific Event State. "
::= { hh3cEponDeviceEventsLogEntry 7 }
hh3cEponDeviceEventsLogEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows creation and deletion of
entries. Once made active an entry MAY not be modified
except to delete it."
::= { hh3cEponDeviceEventsLogEntry 8 }
-- Conformance Statements
-- Conformance Groups
hh3cEponDeviceGroups OBJECT IDENTIFIER ::= { hh3cEponDeviceConformance 1 }
hh3cEponDeviceGroupControl OBJECT-GROUP
OBJECTS {
hh3cEponDeviceObjectReset,
hh3cEponDeviceObjectModes,
hh3cEponDeviceObjectFecEnabled,
hh3cEponDeviceObjectOamMode,
hh3cEponDeviceObjectDeviceReadyMode,
hh3cEponDeviceObjectPowerDown,
hh3cEponDeviceObjectNumberOfLLIDs,
hh3cEponDeviceObjectReportThreshold,
hh3cEponDeviceRemoteMACAddressLLIDControl
}
STATUS current
DESCRIPTION
"A collection of objects of hh3cEponDevice control
definition."
::= { hh3cEponDeviceGroups 1 }
hh3cEponDeviceGroupRMadLTable OBJECT-GROUP
OBJECTS {
hh3cEponDeviceRMadlLLID,
hh3cEponDeviceRMadlLogID,
hh3cEponDeviceRMadlRemoteAddress,
hh3cEponDeviceRMadlType,
hh3cEponDeviceRMadlAction,
hh3cEponDeviceRMadlEntryStatus
}
STATUS current
DESCRIPTION
"A collection of objects of hh3cEponDevice remote Mac address
to LLID table."
::= { hh3cEponDeviceGroups 2 }
hh3cEponDeviceGroupStat OBJECT-GROUP
OBJECTS {
hh3cEponDeviceStatTxFramesQueue0,
hh3cEponDeviceStatTxFramesQueue1,
hh3cEponDeviceStatTxFramesQueue2,
hh3cEponDeviceStatTxFramesQueue3,
hh3cEponDeviceStatTxFramesQueue4,
hh3cEponDeviceStatTxFramesQueue5,
hh3cEponDeviceStatTxFramesQueue6,
hh3cEponDeviceStatTxFramesQueue7,
hh3cEponDeviceStatRxFramesQueue0,
hh3cEponDeviceStatRxFramesQueue1,
hh3cEponDeviceStatRxFramesQueue2,
hh3cEponDeviceStatRxFramesQueue3,
hh3cEponDeviceStatRxFramesQueue4,
hh3cEponDeviceStatRxFramesQueue5,
hh3cEponDeviceStatRxFramesQueue6,
hh3cEponDeviceStatRxFramesQueue7,
hh3cEponDeviceStatDroppedFramesQueue0,
hh3cEponDeviceStatDroppedFramesQueue1,
hh3cEponDeviceStatDroppedFramesQueue2,
hh3cEponDeviceStatDroppedFramesQueue3,
hh3cEponDeviceStatDroppedFramesQueue4,
hh3cEponDeviceStatDroppedFramesQueue5,
hh3cEponDeviceStatDroppedFramesQueue6,
hh3cEponDeviceStatDroppedFramesQueue7
}
STATUS current
DESCRIPTION
"A collection of objects of EPON device Statistics"
::= { hh3cEponDeviceGroups 3 }
hh3cEponDeviceGroupEvent OBJECT-GROUP
OBJECTS {
hh3cEponDeviceSampleMinimum,
hh3cEponDeviceDyingGaspAlarmState,
hh3cEponDeviceDyingGaspAlarmEnabled,
hh3cEponDeviceCriticalEventState,
hh3cEponDeviceCriticalEventEnabled,
hh3cEponDeviceLocalLinkFaultAlarmState,
hh3cEponDeviceLocalLinkFaultAlarmEnabled,
hh3cEponDeviceTemperatureEventIndicationState,
hh3cEponDeviceTemperatureEventIndicationEnabled,
hh3cEponDevicePowerVoltageEventIndicationState,
hh3cEponDevicePowerVoltageEventIndicationEnabled,
hh3cEponDeviceGlobalEventState,
hh3cEponDeviceGlobalEventEnabled,
hh3cEponDeviceErroredSymbolPeriodEventState,
hh3cEponDeviceErroredSymbolPeriodEventEnabled,
hh3cEponDeviceErroredFrameEventState,
hh3cEponDeviceErroredFrameEventEnabled,
hh3cEponDeviceErroredFramePeriodEventState ,
hh3cEponDeviceErroredFramePeriodEventEnabled ,
hh3cEponDeviceErroredFrameSecondsSummaryEventState ,
hh3cEponDeviceErroredFrameSecondsSummaryEventEnabled,
hh3cEponDeviceOrganizationSpecificEventState ,
hh3cEponDeviceOrganizationSpecificEventEnabled,
hh3cEponDeviceEventControl
}
STATUS current
DESCRIPTION
"A collection of objects for EPON device Events"
::= { hh3cEponDeviceGroups 4 }
hh3cEponDeviceGroupEventLog OBJECT-GROUP
OBJECTS {
hh3cEponDeviceEventsLogID,
hh3cEponDeviceEventsLogFirstTime,
hh3cEponDeviceEventsLogLastTime,
hh3cEponDeviceEventsLogCounts,
hh3cEponDeviceEventsLogType,
hh3cEponDeviceEventsLogEntryStatus
}
STATUS current
DESCRIPTION
"A collection of objects for EPON device Events log"
::= { hh3cEponDeviceGroups 5 }
-- Compliance
hh3cEponDeviceCompliances OBJECT IDENTIFIER ::= { hh3cEponDeviceConformance 2 }
hh3cEponDeviceCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for EPON Devices."
MODULE -- this module
MANDATORY-GROUPS { hh3cEponDeviceGroupControl }
GROUP hh3cEponDeviceGroupRMadLTable
DESCRIPTION " This group is mandatory for all
OLT EPON devices supporting LLID-MAC
address table."
GROUP hh3cEponDeviceGroupStat
DESCRIPTION "This group is mandatory for all EPON devices
supporting interfaces for Statistics collection."
GROUP hh3cEponDeviceGroupEvent
DESCRIPTION "This group is mandatory for all EPON devices
supporting interfaces for event collection."
GROUP hh3cEponDeviceGroupEventLog
DESCRIPTION "This group is mandatory for all EPON devices
supporting interfaces for event log collection."
::= { hh3cEponDeviceCompliances 1 }
END
Reference in New Issue Copy Permalink