mibs/MIBS/comware/HH3C-FLOWTEMPLATE-MIB

415 lines
14 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- Copyright (C) 2004 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: Flowtemplate Management Information Base.
-- Reference:
-- Version: 1.0
-- History:
-- V1.0 created by tangshun.
-- ============================================================================
HH3C-FLOWTEMPLATE-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cCommon
FROM HH3C-OID-MIB
ifIndex
FROM RFC1213-MIB
Integer32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
RowStatus, MacAddress
FROM SNMPv2-TC;
--
-- Nodes definitions
--
hh3cFlowTemplate MODULE-IDENTITY
LAST-UPDATED "200511241320Z" -- Nov 24, 2005 at 13:20 GMT
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"Flow template management information base."
::= { hh3cCommon 64 }
hh3cFlowTemplateMibObject OBJECT IDENTIFIER ::= { hh3cFlowTemplate 1 }
hh3cFTConfigGroup OBJECT IDENTIFIER ::= { hh3cFlowTemplateMibObject 1 }
hh3cFTGroupNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for hh3cFTGroupIndex
when creating rows in the hh3cFTGroupTable. If it is 2147483647,
it denotes that hh3cFTGroupTable can't create any instance.
"
::= { hh3cFTConfigGroup 1 }
hh3cFTGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFTGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of flow template group.
A flow template group, which is applied to interface,
must use hh3cFTGroupTable to create a instance
and hh3cFTBasicGroupTable or hh3cFTExtendGroupTable
to configure flow template's need item.
A basic flow template must use hh3cFTBasicGroupTable
to configure some basic flow template's need item,
such as: address, protocol, priority.
A extend flow template must use hh3cFTExtendGroupTable
to configure packet's type and offset and length.
"
::= { hh3cFTConfigGroup 2 }
hh3cFTGroupEntry OBJECT-TYPE
SYNTAX Hh3cFTGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Flow template group information."
INDEX { hh3cFTGroupIndex }
::= { hh3cFTGroupTable 1 }
Hh3cFTGroupEntry ::=
SEQUENCE
{
hh3cFTGroupIndex
Integer32,
hh3cFTGroupName
OCTET STRING,
hh3cFTGroupType
INTEGER,
hh3cFTGroupRowStatus
RowStatus
}
hh3cFTGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Flow template group index."
::= { hh3cFTGroupEntry 1 }
hh3cFTGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow template group name."
::= { hh3cFTGroupEntry 2 }
hh3cFTGroupType OBJECT-TYPE
SYNTAX INTEGER
{
basic(1),
extend(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of flow template."
::= { hh3cFTGroupEntry 3 }
hh3cFTGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus."
::= { hh3cFTGroupEntry 4 }
--
--nodes of hh3cFTBasicGroupTable
--
hh3cFTBasicGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFTBasicGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of basic flow template group."
::= { hh3cFTConfigGroup 3 }
hh3cFTBasicGroupEntry OBJECT-TYPE
SYNTAX Hh3cFTBasicGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Basic flow template group information."
INDEX { hh3cFTGroupIndex }
::= { hh3cFTBasicGroupTable 1 }
Hh3cFTBasicGroupEntry ::=
SEQUENCE
{
hh3cFTBasicGroupAddressType
BITS,
hh3cFTBasicGroupPriorityType
BITS,
hh3cFTBasicGroupProtocolType
BITS,
hh3cFTBasicGroupSMacWildCard
MacAddress,
hh3cFTBasicGroupDMacWildCard
MacAddress,
hh3cFTBasicGroupRowStatus
RowStatus
}
hh3cFTBasicGroupAddressType OBJECT-TYPE
SYNTAX BITS
{
sourceIpv4Address(0),
destIPv4Address(1),
sourceIPv6Address(2),
destIPv6Address(3),
sourceMacAddress(4),
destMacAddress(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of MAC and IP address.
This is a bit-map of possible conditions.
The various bit positions are:
sourceIpv4Address source IPv4's address
destIPv4Address destination IPv4's address
sourceIPv6Address source IPv6 address
destIPv6Address destination IPv6 address
sourceMacAddress source MAC address
destMacAddress destination MAC address
"
::= { hh3cFTBasicGroupEntry 1 }
hh3cFTBasicGroupPriorityType OBJECT-TYPE
SYNTAX BITS
{
vlanID(0),
cos(1),
topVlanID(2),
topCos(3),
fragment(4),
tcpFlag(5),
tos(6),
dscp(7),
ipprecedence(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of priority.
This is a bit-map of possible conditions.
The various bit positions are:
vlanID VlanID
cos 802.1p priority
topVlanID VlanID of top layer
topCos 802.1p priority of top layer
fragment fragment
tcpFlag TCP flag
tos type of service
dscp DSCP
ipprecedence IP precedence
"
::= { hh3cFTBasicGroupEntry 2 }
hh3cFTBasicGroupProtocolType OBJECT-TYPE
SYNTAX BITS
{
l2Potocol(0),
ipv4L3Protocol(1),
ipv6L3Protocol(2),
icmpProtocolType(3),
icmpProtocolCode(4),
icmpv6ProtocolType(5),
icmpv6ProtocolCode(6),
sourceL4Port(7),
destL4Port(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of protocol.
This is a bit-map of possible conditions.
The various bit positions are:
l2Potocol layer 2 protocol
ipv4L3Protocol layer 3 protocol of IPv4
ipv6L3Protocol layer 3 protocol of IPv6
icmpProtocolType Type of ICMP protocol of IPv4
icmpProtocolCode Code of ICMP protocol of IPv4
icmpv6ProtocolType Type of ICMP protocol of IPv6
icmpv6ProtocolCode Code of ICMP protocol of IPv6
sourceL4Port port of layer 4 of source
destL4Port port of layer 4 of destination
"
::= { hh3cFTBasicGroupEntry 3 }
hh3cFTBasicGroupSMacWildCard OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC address field in Ethernet packet head."
::= { hh3cFTBasicGroupEntry 4 }
hh3cFTBasicGroupDMacWildCard OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address field in Ethernet packet head."
::= { hh3cFTBasicGroupEntry 5 }
hh3cFTBasicGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus."
::= { hh3cFTBasicGroupEntry 6 }
--
--nodes of hh3cFTExtendGroupTable
--
hh3cFTExtendGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFTExtendGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of extend flow template group information."
::= { hh3cFTConfigGroup 4 }
hh3cFTExtendGroupEntry OBJECT-TYPE
SYNTAX Hh3cFTExtendGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Extend flow template group information entry."
INDEX { hh3cFTGroupIndex, hh3cFTExtendGroupOffsetType }
::= { hh3cFTExtendGroupTable 1 }
Hh3cFTExtendGroupEntry ::=
SEQUENCE
{
hh3cFTExtendGroupOffsetType
INTEGER,
hh3cFTExtendGroupOffsetMaxValue
Integer32,
hh3cFTExtendGroupLengthMaxValue
Integer32,
hh3cFTExtendGroupRowStatus
RowStatus
}
hh3cFTExtendGroupOffsetType OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
mpls(2),
l2(3),
l4(4),
l5(5),
ipv4(6),
ipv6(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Offset type of the packet.
start Offset from the start of the packet
mpls Offset from the head of MPLS
l2 Offset from the head of the L2 frame
l4 Offset from the head of L4 packet
l5 Offset from the head of the L5 packet
ipv4 Offset from the head of the IPv4 packet
ipv6 Offset from the head of the IPv6 packet
"
::= { hh3cFTExtendGroupEntry 1 }
hh3cFTExtendGroupOffsetMaxValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The max value of offset."
::= { hh3cFTExtendGroupEntry 2 }
hh3cFTExtendGroupLengthMaxValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The max value of length."
::= { hh3cFTExtendGroupEntry 3 }
hh3cFTExtendGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus."
::= { hh3cFTExtendGroupEntry 4 }
--
--nodes of hh3cFTApplyGroup
--
hh3cFTApplyGroup OBJECT IDENTIFIER ::= { hh3cFlowTemplateMibObject 2 }
hh3cFTIfApplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cFTIfApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of any interface with flowtemplate.
A flow template, which will be applied interface,
is an instance at hh3cFTGroupTable
and hh3cFTBasicGroupTable or hh3cFTExtendGroupTable.
A basic flow template is an instance at hh3cFTGroupTable
and hh3cFTBasicGroupTable, and the instance's RowStatus
must be 'active' at each table.
A extend flow template is an instance at hh3cFTGroupTable
and hh3cFTExtendGroupTable, and the instance's RowStatus
must be 'active' at each table.
"
::= { hh3cFTApplyGroup 1 }
hh3cFTIfApplyEntry OBJECT-TYPE
SYNTAX Hh3cFTIfApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Any interface with flowtemplate information."
INDEX { ifIndex, hh3cFTGroupIndex }
::= { hh3cFTIfApplyTable 1 }
Hh3cFTIfApplyEntry ::=
SEQUENCE
{
hh3cFTIfApplyGroupName
OCTET STRING,
hh3cFTIfApplyRowStatus
RowStatus
}
hh3cFTIfApplyGroupName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of flow template."
::= { hh3cFTIfApplyEntry 1 }
hh3cFTIfApplyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus."
::= { hh3cFTIfApplyEntry 2 }
END