mibs/MIBS/comware/HH3C-LAG-MIB

373 lines
12 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- =====================================================================
-- Copyright (c) 2004-2012 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: LACP extend MIB
-- Reference:
-- Version: V1.7
-- History:
-- V1.0 Initial version
-- V1.1 2004-10-12 updated by gaolong
-- Remove OID comments.
-- Change MAX-ACCESS clause value of hh3cAggLinkNumber to accessible-for-notify
-- because this index object is used when sending notification.
-- Fix a default value error of hh3cAggResourceAllocationValue.
-- V1.2 2004-10-25 updated by fuzhenyu
-- Change the range of hh3cAggLinkNumber from (1..256) to (1..728)
-- Change the size of hh3cAggPortNotAttachedString from (1..50) to (1..255)
-- V1.3 2006-03-05 updated by zhangjian
-- Edit the description of hh3cAggPortNotAttachedReason.
-- Change value range of hh3cAggLinkNumber.
-- V1.4 2006-11-15 updated by zhangjian
-- Change MAX-ACCESS clause of hh3cAggPortIndex to accessible-for-notify.
-- Add hh3cAggPortInactiveNotification2 and hh3cAggPortActiveNotification.
-- V1.5 2009-10-09 updated by songjianyong
-- Change value range of hh3cAggPortNotAttachedReason.
-- V1.6 2010-03-26 updated by songjianyong
-- Change value range of hh3cAggPortNotAttachedReason.
-- V1.7 2011-10-12 updated by liyugang
-- Change some descriptions.
-- =====================================================================
HH3C-LAG-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, RowStatus,TruthValue,TEXTUAL-CONVENTION
FROM SNMPv2-TC
hh3cRhw
FROM HH3C-OID-MIB
PortList
FROM Q-BRIDGE-MIB;
hh3cLAG MODULE-IDENTITY
LAST-UPDATED "200310091942Z" -- October 09, 2003 at 19:42 GMT
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"LACP extend MIB."
::= { hh3cRhw 25 }
--
-- Node definitions
--
hh3cLAGMibObjects OBJECT IDENTIFIER ::= { hh3cLAG 1 }
hh3cAggLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cAggLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of aggregate link objects."
::= { hh3cLAGMibObjects 1 }
hh3cAggLinkEntry OBJECT-TYPE
SYNTAX Hh3cAggLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of table."
INDEX { hh3cAggLinkNumber }
::= { hh3cAggLinkTable 1 }
Hh3cAggLinkEntry ::=
SEQUENCE {
hh3cAggLinkNumber
Integer32,
hh3cAggLinkName
DisplayString,
hh3cAggLinkMode
INTEGER,
hh3cAggLinkPortList
PortList,
hh3cAggLinkState
RowStatus,
hh3cAggPortListSelectedPorts
PortList,
hh3cAggPortListSamePartnerPorts
PortList
}
hh3cAggLinkNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The serial number of aggregation group."
::= { hh3cAggLinkEntry 1 }
hh3cAggLinkName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggregation name."
::= { hh3cAggLinkEntry 2 }
hh3cAggLinkMode OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
static(2),
dynamic(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of aggregation.
manual: Manual aggregation, no LACP.
static: Membership specified by user, LACP is
used to validate.
dynamic: Completely dynamic aggregation detected
by LACP."
::= { hh3cAggLinkEntry 3 }
hh3cAggLinkPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"List of ports in this link aggregation group, by bridge port
number. If the mode of the link aggregation group is manual
or static, you can update this list to your
hearts content. However, if the link aggregation group is
dynamic, the system will maintain it. You are not
permitted to set the value of this to
all zeroes."
::= { hh3cAggLinkEntry 4 }
hh3cAggLinkState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus, now support three states:
createAndGo, active, destroy."
::= { hh3cAggLinkEntry 5 }
hh3cAggPortListSelectedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A PortList of physical ports that have been
selected but not attached to this aggregator.
When the bit is set to 1,it means the
corresponding port is in the portlist."
::= { hh3cAggLinkEntry 6 }
hh3cAggPortListSamePartnerPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PortList of physical ports that have the
same Actor SystemID and partner systemID as
this aggregator, but have different actor
and partner keys of aggregator."
::= { hh3cAggLinkEntry 7 }
hh3cAggPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of aggregate port objects."
::= { hh3cLAGMibObjects 2 }
hh3cAggPortEntry OBJECT-TYPE
SYNTAX Hh3cAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of table."
INDEX { hh3cAggPortIndex }
::= { hh3cAggPortTable 1 }
Hh3cAggPortEntry ::=
SEQUENCE {
hh3cAggPortIndex
Gauge32,
hh3cAggPortNotAttachedReason
Integer32,
hh3cAggPortLacpState
TruthValue,
hh3cAggPortNotAttachedString
DisplayString
}
hh3cAggPortIndex OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Port ifindex which is according to RFC1213 MIB."
::= { hh3cAggPortEntry 1 }
hh3cAggPortNotAttachedReason OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reason why this port is selected for an
aggregator but not attached,
0: The port is attached to this aggregator.
1: The current number of active ports has
reached the upper limit.
2: All aggregation resources are already in-use.
3: The port's configuration is improper
for being attached.
4: The port's partner is improper for being attached.
5: The number of current active ports
has not reached the lower limit.
6: The port's physical state (down) is
improper for being attached.
7: The port is not selected for an aggregator.
8: The port's hardware restriction is
improper for being attached.
9: The port's speed is improper for being attached.
10: The port's duplex mode is improper for being attached."
::= { hh3cAggPortEntry 2 }
hh3cAggPortLacpState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control ports' lacp enble or disable."
::= { hh3cAggPortEntry 3 }
hh3cAggPortNotAttachedString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string which interprets this
port is selected for an aggregator
but not attached."
::= { hh3cAggPortEntry 4 }
hh3cAggResourceAllocationValue OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value calculated to decide which
aggregations have first call on the load-sharing
aggregation resources in the hardware. It
depends on the aggregation type and total
speed."
DEFVAL { "0" }
::= { hh3cLAGMibObjects 3 }
hh3cLAGMibNotifications OBJECT IDENTIFIER ::= { hh3cLAG 2 }
hh3cAggSpeedChangedNotification NOTIFICATION-TYPE
OBJECTS { hh3cAggLinkNumber }
STATUS current
DESCRIPTION
"This event will be triggered whenever an
aggregation changes its speed."
::= { hh3cLAGMibNotifications 1 }
hh3cAggPortInactiveNotification NOTIFICATION-TYPE
OBJECTS { hh3cAggLinkNumber }
STATUS current
DESCRIPTION
"This event will be triggered whenever any port
in aggregator is made inactive."
::= { hh3cLAGMibNotifications 2 }
hh3cAggPortInactiveNotification2 NOTIFICATION-TYPE
OBJECTS { hh3cAggLinkNumber,
hh3cAggPortIndex }
STATUS current
DESCRIPTION
"This event will be triggered whenever the port
in aggregator is made inactive."
::= { hh3cLAGMibNotifications 3 }
hh3cAggPortActiveNotification NOTIFICATION-TYPE
OBJECTS { hh3cAggLinkNumber,
hh3cAggPortIndex }
STATUS current
DESCRIPTION
"This event will be triggered whenever the port
in aggregator is made active."
::= { hh3cLAGMibNotifications 4 }
hh3cLAGMibConformance OBJECT IDENTIFIER ::= { hh3cLAG 3 }
hh3cLAGMibCompliances OBJECT IDENTIFIER ::= { hh3cLAGMibConformance 1 }
hh3cLAGMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
which implement the Lag MIB."
MODULE -- this module
MANDATORY-GROUPS
{ hh3cLAGMibObjectGroup, hh3cLAGMibNotificationGroup }
::= { hh3cLAGMibCompliances 1 }
hh3cLAGMibGroup OBJECT IDENTIFIER ::= { hh3cLAGMibConformance 2 }
hh3cLAGMibObjectGroup OBJECT-GROUP
OBJECTS { hh3cAggLinkName, hh3cAggLinkMode, hh3cAggLinkPortList,
hh3cAggLinkState, hh3cAggPortListSelectedPorts,
hh3cAggPortListSamePartnerPorts,
hh3cAggPortNotAttachedReason, hh3cAggPortLacpState,
hh3cAggPortNotAttachedString,
hh3cAggResourceAllocationValue }
STATUS current
DESCRIPTION
"The collection of objects which are used to
represent LAG objects."
::= { hh3cLAGMibGroup 1 }
hh3cLAGMibNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hh3cAggSpeedChangedNotification,
hh3cAggPortInactiveNotification,
hh3cAggPortInactiveNotification2,
hh3cAggPortActiveNotification }
STATUS current
DESCRIPTION
"The collection of objects which are used to
represent notifications."
::= { hh3cLAGMibGroup 2 }
END