mibs/MIBS/comware/HH3C-LI-MIB

-- ============================================================================
-- Copyright (c) 2004-2010 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: Lawful Interception MIB
-- Reference:
-- Version: V1.0
-- History:
--   V1.0 2009-08-25 Initial version Created by Lixin Xu
-- ============================================================================
HH3C-LI-MIB DEFINITIONS ::= BEGIN

IMPORTS
    hh3cCommon
        FROM HH3C-OID-MIB
    Counter64, Counter32, Integer32, Unsigned32,
    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    RowStatus, TruthValue, MacAddress, DateAndTime
        FROM SNMPv2-TC
    InetAddress, InetAddressType, InetAddressPrefixLength, InetPortNumber
        FROM INET-ADDRESS-MIB
    InterfaceIndexOrZero
        FROM IF-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB;

hh3cLI MODULE-IDENTITY
    LAST-UPDATED "200908251000Z"
    ORGANIZATION
        "New H3C Tech. Co., Ltd."
    CONTACT-INFO
        "Platform Team New H3C Tech. Co., Ltd.
         Hai-Dian District Beijing P.R. China
         http://www.h3c.com
         Zip:100085"
    DESCRIPTION
        "Lawful Interception MIB"
    REVISION
        "200908251000Z"
    DESCRIPTION
        "Initial version."
    ::= { hh3cCommon 111 }

--
-- Node definitions
--

hh3cLICommon OBJECT IDENTIFIER ::= { hh3cLI 1 }

hh3cLITrapBindObjects OBJECT IDENTIFIER ::= { hh3cLICommon 1 }

hh3cLIBoardInformation OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "It is a slot number."
    ::= { hh3cLITrapBindObjects 1 }

hh3cLINotifications OBJECT IDENTIFIER ::= { hh3cLICommon 2 }

hh3cLINotificationsPrefix OBJECT IDENTIFIER ::= { hh3cLINotifications 0 }

hh3cLIActive NOTIFICATION-TYPE
    OBJECTS {
              hh3cLIStreamtype
            }
    STATUS current
    DESCRIPTION
        "This Notification is sent when a type of intercepting configuration
        is changed from inactive to active.
        The value of the hh3cLIStreamtype which identify the actual intercept
        stream is included in this notification."
    ::= { hh3cLINotificationsPrefix 1 }

hh3cLITimeOut NOTIFICATION-TYPE
    OBJECTS { hh3cLIMediationRowStatus }
    STATUS current
    DESCRIPTION
        "When the time specified in hh3cLIMediationTimeout arrives,
        the device notifies the manager corresponding intercept is removed."
    ::= { hh3cLINotificationsPrefix 2 }

hh3cLIFailureInformation NOTIFICATION-TYPE
    OBJECTS {
                hh3cLIStreamtype,
                hh3cLIBoardInformation
            }
    STATUS current
    DESCRIPTION
        "When interception is configured on distributed device,
        the configuration perhaps failed on some board.
        If this happened, this notification will occur."
    ::= { hh3cLINotificationsPrefix 3 }

hh3cLIObjects OBJECT IDENTIFIER ::= { hh3cLICommon 3 }

hh3cLINewIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object will be used as an index value for a new
        hh3cLIMediationEntry.  Whenever read, the agent will
        give a non-used value.  This is to reduce the probability
        of conflict during creation of new hh3cLIMediationTable entries."
    ::= { hh3cLIObjects 1 }
--
-- hh3cLIMediationTable definition
--
hh3cLIMediationTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cLIMediationEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table describes interception gateway information with which
        interception device communicates."
    ::= { hh3cLIObjects 2 }

hh3cLIMediationEntry OBJECT-TYPE
    SYNTAX Hh3cLIMediationEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry of configuring mediation device."
    INDEX { hh3cLIMediationIndex }
    ::= { hh3cLIMediationTable 1 }

Hh3cLIMediationEntry ::=
    SEQUENCE {
        hh3cLIMediationIndex                 Integer32,
        hh3cLIMediationDestAddrType          InetAddressType,
        hh3cLIMediationDestAddr              InetAddress,
        hh3cLIMediationDestPort              InetPortNumber,
        hh3cLIMediationSrcInterface          InterfaceIndexOrZero,
        hh3cLIMediationDscp                  Integer32,
        hh3cLIMediationTimeOut               DateAndTime,
        hh3cLIMediationTransport             INTEGER,
        hh3cLIMediationNotificationEnable    TruthValue,
        hh3cLIMediationRowStatus             RowStatus
     }

hh3cLIMediationIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "hh3cLIMediationIndex is a entry identifier.  The Mediation Device
            should be responsible for making sure these are unique.
            Before creating a new entry, a value for this variable may be
            obtained by reading hh3cLINewIndex to reduce the probability
            of a value collision."
    ::= { hh3cLIMediationEntry 1 }

hh3cLIMediationDestAddrType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The type of hh3cLIMediationDestAddr."
    ::= { hh3cLIMediationEntry 2 }

hh3cLIMediationDestAddr OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The IP Address of the Mediation Device to receive intercepted traffic."
    ::= { hh3cLIMediationEntry 3 }

hh3cLIMediationDestPort OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The L4-port number on the Mediation Device
         to receive intercepted traffic."
    ::= { hh3cLIMediationEntry 4 }

hh3cLIMediationSrcInterface OBJECT-TYPE
    SYNTAX InterfaceIndexOrZero
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The interface on the intercepting device from which to
        transmit intercepted data.
        If zero, intercepting device will select an outbound
        interface according to hh3cLIMediationDestAddr."
    ::= { hh3cLIMediationEntry 5 }

hh3cLIMediationDscp OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The Differentiated Services Code Point the intercepting
        device applies to the IP packets encapsulating the intercepted traffic."
    DEFVAL { 34 }
    ::= { hh3cLIMediationEntry 6 }

hh3cLIMediationTimeOut OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The time at which this row and all related Stream Table rows
        should be automatically removed, and the intercept function expire."
    ::= { hh3cLIMediationEntry 7 }

hh3cLIMediationTransport OBJECT-TYPE
    SYNTAX INTEGER
        {
            udp(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The protocol used in transferring intercepted data to the
        Mediation Device."
    ::= { hh3cLIMediationEntry 8 }

hh3cLIMediationNotificationEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This variable controls the generation of any notifications or
        informs by the MIB agent for this table entry."
    DEFVAL { true }
    ::= { hh3cLIMediationEntry 9 }

hh3cLIMediationRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Operation status of this table entry."
    ::= { hh3cLIMediationEntry 10 }

--
-- hh3cLIStreamTable definition
--
hh3cLIStreamTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cLIStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table lists the traffic stream's type to be intercepted.
         The specified filter is defined in hh3cLIIPStreamTable,
         hh3cLIMACStreamTable or hh3cLIUserStreamTable, according to
         hh3cLIStreamtype.  Also it contains counters for packets to
         be intercepted and dropped by attached type of filter."
    ::= { hh3cLIObjects 3 }

hh3cLIStreamEntry OBJECT-TYPE
    SYNTAX Hh3cLIStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A single type of data stream to be intercepted."
    INDEX { hh3cLIMediationIndex, hh3cLIStreamIndex }
    ::= { hh3cLIStreamTable 1 }

Hh3cLIStreamEntry ::=
    SEQUENCE {
        hh3cLIStreamIndex        Integer32,
        hh3cLIStreamtype         INTEGER,
        hh3cLIStreamEnable       TruthValue,
        hh3cLIStreamPackets      Counter32,
        hh3cLIStreamDrops        Counter32,
        hh3cLIStreamHPackets     Counter64,
        hh3cLIStreamHDrops       Counter64,
        hh3cLIStreamRowStatus    RowStatus
     }

hh3cLIStreamIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of the stream entry."
    ::= { hh3cLIStreamEntry 1 }

hh3cLIStreamtype OBJECT-TYPE
    SYNTAX INTEGER
        {
            ip(1),
            mac(2),
            userConnection(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Identifies the type of stream, and according to it uses filter table.
        It can not be changed after a filter table is attached to it.
        The following types of streams are supported:
         ip:             IP filter.  The exact definition is a row in
                         hh3cLIIPStreamTable.
         mac:            MAC filter.  The exact definition is a row in
                         hh3cLIMACStreamTable.
         userConnecton:  User connection filter.  The exact definition
                         is a row in hh3cLIUserStreamTable."
    ::= { hh3cLIStreamEntry 2 }

hh3cLIStreamEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "If 'true', the interception is active.  And it is set to 'true'
         only after an additional filter specification has been attached
         to this stream."
    DEFVAL { false }
    ::= { hh3cLIStreamEntry 3 }

hh3cLIStreamPackets OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The numbers of packets that have been intercepted."
    ::= { hh3cLIStreamEntry 4 }

hh3cLIStreamDrops OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The numbers of packets were dropped in the lawful intercept process."
    ::= { hh3cLIStreamEntry 5 }

hh3cLIStreamHPackets OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The numbers of packets have been intercepted.
        This object is a 64-bit version of hh3cLIStreamPackets."
    ::= { hh3cLIStreamEntry 6 }

hh3cLIStreamHDrops OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The numbers of packets were dropped in the lawful intercept process.
        This object is a 64-bit version of hh3cLIStreamDrops."
    ::= { hh3cLIStreamEntry 7 }

hh3cLIStreamRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Operation status of this table entry."
    ::= { hh3cLIStreamEntry 8 }

--
-- hh3cLIIPStreamTable definition
--
hh3cLIIPStream OBJECT IDENTIFIER ::= { hh3cLI 2 }

hh3cLIIPStreamObjects OBJECT IDENTIFIER ::= { hh3cLIIPStream 1 }

hh3cLIIPStreamTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cLIIPStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table lists the IPv4 and IPv6 streams to be intercepted.
        It is associated with hh3cLIMediationTable and hh3cLIStreamTable."
    ::= { hh3cLIIPStreamObjects 1 }

hh3cLIIPStreamEntry OBJECT-TYPE
    SYNTAX Hh3cLIIPStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A single stream to be intercepted.
        The first index indicates the Mediation Device.
        The second index is that of the stream's counter entry
        in the hh3cLIStreamTable.  The second index permits multiple
        classifiers to be used together, such as having an IP address
        as source or destination."
    INDEX { hh3cLIMediationIndex, hh3cLIStreamIndex }
    ::= { hh3cLIIPStreamTable 1 }

Hh3cLIIPStreamEntry ::=
    SEQUENCE {
        hh3cLIIPStreamInterface          InterfaceIndexOrZero,
        hh3cLIIPStreamAddrType           InetAddressType,
        hh3cLIIPStreamDestAddr           InetAddress,
        hh3cLIIPStreamDestAddrLength     InetAddressPrefixLength,
        hh3cLIIPStreamSrcAddr            InetAddress,
        hh3cLIIPStreamSrcAddrLength      InetAddressPrefixLength,
        hh3cLIIPStreamTosByte            Integer32,
        hh3cLIIPStreamTosByteMask        Integer32,
        hh3cLIIPStreamFlowId             Integer32,
        hh3cLIIPStreamProtocol           Integer32,
        hh3cLIIPStreamDestL4PortMin      InetPortNumber,
        hh3cLIIPStreamDestL4PortMax      InetPortNumber,
        hh3cLIIPStreamSrcL4PortMin       InetPortNumber,
        hh3cLIIPStreamSrcL4PortMax       InetPortNumber,
        hh3cLIIPStreamVRF                SnmpAdminString,
        hh3cLIIPStreamRowStatus          RowStatus
     }

hh3cLIIPStreamInterface OBJECT-TYPE
    SYNTAX InterfaceIndexOrZero
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Traffic received or transmitted over this interface
         will be intercepted.

         This value must be set when creating a stream entry,
         either zero, or a valid interface index.

         If the value is zero, interception accepts any interface.
         Then at least one additional parameter must be selected,
         and not be default value."
    ::= { hh3cLIIPStreamEntry 1 }

hh3cLIIPStreamAddrType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The type of address, used in packet selection."
    DEFVAL { ipv4 }
    ::= { hh3cLIIPStreamEntry 2 }

hh3cLIIPStreamDestAddr OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The Destination address  used in packet selection.
        This address will be consistent with the type specified in
        hh3cLIIPStreamAddrType."
    DEFVAL  { '00000000'H }
    ::= { hh3cLIIPStreamEntry 3 }

hh3cLIIPStreamDestAddrLength OBJECT-TYPE
    SYNTAX InetAddressPrefixLength
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The length of the Destination Prefix.  A value of zero means
        all addresses to match.  This prefix length will be consistent
        with the type specified in hh3cLIIPStreamAddrType."
    DEFVAL { 0 }
    ::= { hh3cLIIPStreamEntry 4 }

hh3cLIIPStreamSrcAddr OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The Source Address used in packet selection.  This address will
        be consistent with the type specified in hh3cLIIPStreamAddrType."
    DEFVAL  { '00000000'H }
    ::= { hh3cLIIPStreamEntry 5 }

hh3cLIIPStreamSrcAddrLength OBJECT-TYPE
    SYNTAX InetAddressPrefixLength
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The length of the Source Prefix.  A value of zero means all
        addresses to match.  This prefix length will be consistent with
        the type specified in hh3cLIIPStreamAddrType."
    DEFVAL { 0 }
    ::= { hh3cLIIPStreamEntry 6 }

hh3cLIIPStreamTosByte OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The value of the TOS byte.
        If hh3cLIIPStreamTosByte&(~hh3cLIIPStreamTosByteMask)!=0,
        configuration is rejected."
    DEFVAL { 0 }
    ::= { hh3cLIIPStreamEntry 7 }

hh3cLIIPStreamTosByteMask OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This value is ANDed with the value of the TOS byte in a packet
         and compared with hh3cLIIPStreamTosByte.  If the values are equal,
         the comparison is equal.
         If both the mask and the TosByte value are zero,
         the result is to always accept."
    DEFVAL { 0 }
    ::= { hh3cLIIPStreamEntry 8 }

hh3cLIIPStreamFlowId OBJECT-TYPE
    SYNTAX Integer32 (-1 | 0..1048575)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The flow identifier in an IPv6 header.  -1 indicates that the
        Flow Id is unused."
    DEFVAL { -1 } -- any flow identifier value
    ::= { hh3cLIIPStreamEntry 9 }

hh3cLIIPStreamProtocol OBJECT-TYPE
    SYNTAX Integer32 (-1 | 0..255)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The IP protocol to match against the IPv4 protocol number or
        the IPv6 Next- Header number in the packet."
    DEFVAL { -1 } -- any IP protocol
    ::= { hh3cLIIPStreamEntry 10 }

hh3cLIIPStreamDestL4PortMin OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The minimum value that the layer-4 destination port number in
         the packet must have in order to match.  This value must be
         equal to or less than the value specified for this entry in
         hh3cLIIPStreamDestL4PortMax.

         If both hh3cLIIPStreamDestL4PortMin and hh3cLIIPStreamDestL4PortMax
         are at their default values, the port number is effectively unused.
         If hh3cLIIPStreamDestL4PortMin is equal to
         hh3cLIIPStreamDestL4PortMax, only one port number to be intercepted."
    DEFVAL { 0 }
    ::= { hh3cLIIPStreamEntry 11 }

hh3cLIIPStreamDestL4PortMax OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The maximum value that the layer-4 destination port number in
         the packet must have in order to match this classifier entry.
         This value must be equal to or greater than the value specified
         for this entry in hh3cLIIPStreamDestL4PortMin.
         If both hh3cLIIPStreamDestL4PortMin and hh3cLIIPStreamDestL4PortMax
         are at their default values, the port number is effectively unused.
         If hh3cLIIPStreamDestL4PortMin is equal to hh3cLIIPStreamDestL4PortMax,
         only one port number to be intercepted."
    DEFVAL { 65535 }
    ::= { hh3cLIIPStreamEntry 12 }

hh3cLIIPStreamSrcL4PortMin OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The minimum value that the layer-4 destination port number in
         the packet must have in order to match.  This value must be
         equal to or less than the value specified for this entry in
         hh3cLIIPStreamSrcL4PortMax.
         If both hh3cLIIPStreamSrcL4PortMin and hh3cLIIPStreamSrcL4PortMax
         are at their default values, the port number is effectively unused.
         If hh3cLIIPStreamSrcL4PortMin is equal to
         hh3cLIIPStreamSrcL4PortMax, only one port number to be intercepted."
    DEFVAL { 0 }
    ::= { hh3cLIIPStreamEntry 13 }

hh3cLIIPStreamSrcL4PortMax OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The maximum value that the layer-4 destination port number in
         the packet must have in order to match this classifier entry.
         This value must be equal to or greater than the value specified
         for this entry in hh3cLIIPStreamSrcL4PortMin.
         If both hh3cLIIPStreamSrcL4PortMin and hh3cLIIPStreamSrcL4PortMax
         are at their default values, the port number is effectively unused.
         If hh3cLIIPStreamSrcL4PortMin is equal to hh3cLIIPStreamSrcL4PortMax,
         only one port number to be intercepted."
    DEFVAL { 65535 }
    ::= { hh3cLIIPStreamEntry 14 }

hh3cLIIPStreamVRF OBJECT-TYPE
    SYNTAX SnmpAdminString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "It is the name of a Virtual Routing and Forwarding (VRF) of a VPN."
    DEFVAL { "" }
    ::= { hh3cLIIPStreamEntry 15 }

hh3cLIIPStreamRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Operation status of this table entry."
    ::= { hh3cLIIPStreamEntry 18 }

--
-- hh3cLIMACStreamTable definition
--
hh3cLIMACStream OBJECT IDENTIFIER ::= { hh3cLI 3 }

hh3cLIMACStreamObjects OBJECT IDENTIFIER ::= { hh3cLIMACStream 1 }

hh3cLIMACStreamTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cLIMACStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table lists the IEEE 802 streams to be intercepted.
        It is associated with hh3cLIMediationTable and hh3cLIStreamTable."
    ::= { hh3cLIMACStreamObjects 1 }

hh3cLIMACStreamEntry OBJECT-TYPE
    SYNTAX Hh3cLIMACStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A single stream to be intercepted.
        The first index indicates the Mediation Device.
        The second index is that of the stream's counter entry
        in the hh3cLIStreamTable.  The second index permits multiple
        classifiers to be used together, such as having an MAC address
        as source or destination."
    INDEX { hh3cLIMediationIndex, hh3cLIStreamIndex }
    ::= { hh3cLIMACStreamTable 1 }

Hh3cLIMACStreamEntry ::=
    SEQUENCE {
        hh3cLIMACStreamFields        BITS,
        hh3cLIMACStreamInterface     InterfaceIndexOrZero,
        hh3cLIMACStreamDestAddr      MacAddress,
        hh3cLIMACStreamSrcAddr       MacAddress,
        hh3cLIMACStreamEthPid        Unsigned32,
        hh3cLIMACStreamDSap          Unsigned32,
        hh3cLIMACStreamSSap          Unsigned32,
        hh3cLIMACStreamRowStatus     RowStatus
     }

hh3cLIMACStreamFields OBJECT-TYPE
    SYNTAX BITS {
                    interface(0),
                    dstMacAddress(1),
                    srcMacAddress(2),
                    ethernetPid(3),
                    dSap(4),
                    sSap(5)
                }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object displays what attributes will be compared to
         identify traffic.
         interface:     indicates that traffic on the stated
                                interface is to be intercepted
         dstMacAddress: indicates that traffic destined to a
                                given address should be intercepted
         srcMacAddress: indicates that traffic sourced from a
                                given address should be intercepted
         ethernetPid:   indicates that traffic with a stated
                                Ethernet Protocol Identifier should
                                be intercepted
         dSap:          indicates that traffic with an certain
                                802.2 LLC Destination SAP should be
                                intercepted
         sSap:          indicates that traffic with an certain
                                802.2 LLC Source SAP should be intercepted

         At least one of the bits has to be set in order to activate an
         entry.  If multiple bits are set, traffic to be intercepted must
         be satisfied with all set attributes."
    ::= { hh3cLIMACStreamEntry 1 }

hh3cLIMACStreamInterface OBJECT-TYPE
    SYNTAX InterfaceIndexOrZero
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Traffic received or transmitted over this interface
         will be intercepted.
         This value must be set when creating a stream entry,
         either zero, or a valid interface index.
         If the value is zero, interception accepts any interface.
         Additional parameter must be selected together."
    ::= { hh3cLIMACStreamEntry 2 }

hh3cLIMACStreamDestAddr OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The Destination address used in packet selection."
    ::= { hh3cLIMACStreamEntry 3 }

hh3cLIMACStreamSrcAddr OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The Source Address used in packet selection."
    ::= { hh3cLIMACStreamEntry 4 }

hh3cLIMACStreamEthPid OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The value of the Ethernet Protocol Identifier in the
        Ethernet traffic or IEEE 802.2 SNAP traffic."
    ::= { hh3cLIMACStreamEntry 5 }

hh3cLIMACStreamDSap OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The value of the IEEE 802.2 Destination SAP."
    ::= { hh3cLIMACStreamEntry 6 }

hh3cLIMACStreamSSap OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The value of the IEEE 802.2 Source SAP."
    ::= { hh3cLIMACStreamEntry 7 }

hh3cLIMACStreamRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Operation status of this table entry."
    ::= { hh3cLIMACStreamEntry 8 }

--
-- hh3cLIUserStreamTable definition
--
hh3cLIUserStream OBJECT IDENTIFIER ::= { hh3cLI 4 }

hh3cLIUserStreamObjects OBJECT IDENTIFIER ::= { hh3cLIUserStream 1 }

hh3cLIUserStreamTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cLIUserStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table lists the user connection streams to be intercepted.
        It is associated with hh3cLIMediationTable and hh3cLIStreamTable."
    ::= { hh3cLIUserStreamObjects 1 }

hh3cLIUserStreamEntry OBJECT-TYPE
    SYNTAX Hh3cLIUserStreamEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A single stream to be intercepted.
        The first index indicates the Mediation Device.
        The second index is that of the stream's counter entry
        in the hh3cLIStreamTable.  This permits multiple classifiers
        to be used together."
    INDEX { hh3cLIMediationIndex, hh3cLIStreamIndex }
    ::= { hh3cLIUserStreamTable 1 }

Hh3cLIUserStreamEntry ::=
    SEQUENCE {
        hh3cLIUserStreamAcctSessID       OCTET STRING,
        hh3cLIUserStreamRowStatus        RowStatus
     }

hh3cLIUserStreamAcctSessID OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..253))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This is the RADIUS attribute 44 acct-session-ID.
         The string must be set, and the length not be zero."
    ::= { hh3cLIUserStreamEntry 1 }

hh3cLIUserStreamRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Operation status of this table entry."
    ::= { hh3cLIUserStreamEntry 2 }

END