mibs/MIBS/comware/HH3C-LPBKDT-MIB

230 lines
8.3 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ==================================================================
-- Copyright (C) 2008-2015 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: Loopback detection MIB
-- Reference:
-- Version: V1.2
-- History:
-- V1.0 2008-09-27 Created by LuoXuefang
-- V1.1 2009-03-30 Added hh3cLpbkdtTrapPerVlanLoopbacked,
-- hh3cLpbkdtTrapPerVlanRecovered and
-- hh3cLpbkdtObjects by TongWei.
-- V1.2 2014-07-26 Added hh3cLpbkdtVlanEnable, hh3cLpbkdtAction,
-- hh3cLpbkdtIntervalTime, hh3cLpbkdtPortTable,
-- hh3cLpbkdtPortEntry, hh3cLpbkdtPortIfIndex,
-- hh3cLpbkdtPortVlanEnable, hh3cLpbkdtPortAction and
-- hh3cLpbkdtPortLoopbacked by ZhangWei.
-- ==================================================================
HH3C-LPBKDT-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cCommon
FROM HH3C-OID-MIB
ifIndex, ifDescr
FROM IF-MIB
VlanId
FROM Q-BRIDGE-MIB
TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32
FROM SNMPv2-SMI
InterfaceIndex
FROM IF-MIB;
hh3cLpbkdt MODULE-IDENTITY
LAST-UPDATED "201407261518Z" -- July 26, 2014 at 15:18 GMT
ORGANIZATION "New H3C Technologies Co., Ltd."
CONTACT-INFO
"Comware Team New H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085"
DESCRIPTION
"Loops may cause broadcast storms. The purpose of loopback detection
is to detect loops on the device and to protect the network."
REVISION "201407261518Z"
DESCRIPTION
"Added new nodes to configure the loop detection."
REVISION "200903301741Z"
DESCRIPTION
"To fix bugs in the MIB file."
REVISION "200809271504Z"
DESCRIPTION
"The initial revision of this MIB module."
::= { hh3cCommon 95 }
-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
Hh3cLpbkdtActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Loopback detection action on the port on which a loop is detected.
When a loop is detected on a port, the device generates a log. The
enumeration 'none(1)' means that the device performs no action on the
port. The enumeration 'block(2)' means that the device disables MAC
address learning and blocks traffic on the port. The enumeration
'nolearning(3)' means that the device disables MAC address learning on
the port. The enumeration 'shutdown(4)' means that the device shuts
down the port. The device automatically sets the port to the forwarding
state after the time interval configured."
SYNTAX INTEGER {
none(1),
block(2),
nolearning(3),
shutdown(4)
}
hh3cLpbkdtNotifications OBJECT IDENTIFIER ::= { hh3cLpbkdt 1 }
hh3cLpbkdtObjects OBJECT IDENTIFIER ::= { hh3cLpbkdt 2 }
hh3cLpbkdtTrapPrefix OBJECT IDENTIFIER ::= { hh3cLpbkdtNotifications 0 }
hh3cLpbkdtTrapLoopbacked NOTIFICATION-TYPE
OBJECTS { ifIndex, ifDescr }
STATUS current
DESCRIPTION
"Trap message is generated when the interface is looped."
::= { hh3cLpbkdtTrapPrefix 1 }
hh3cLpbkdtTrapRecovered NOTIFICATION-TYPE
OBJECTS { ifIndex, ifDescr }
STATUS current
DESCRIPTION
"Trap message is generated when the loops on the interface
are eliminated."
::= { hh3cLpbkdtTrapPrefix 2 }
hh3cLpbkdtTrapPerVlanLoopbacked NOTIFICATION-TYPE
OBJECTS { ifIndex, ifDescr, hh3cLpbkdtVlanID }
STATUS current
DESCRIPTION
"Trap message is generated when the interface is looped in the VLAN."
::= { hh3cLpbkdtTrapPrefix 3 }
hh3cLpbkdtTrapPerVlanRecovered NOTIFICATION-TYPE
OBJECTS { ifIndex, ifDescr, hh3cLpbkdtVlanID }
STATUS current
DESCRIPTION
"Trap message is generated when the loop on the interface
is eliminated in the VLAN."
::= { hh3cLpbkdtTrapPrefix 4 }
hh3cLpbkdtVlanID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The ID of VLAN."
::= { hh3cLpbkdtObjects 1 }
hh3cLpbkdtVlanEnable OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the loop detection is enabled globally for the VLANs. Each
octet within this value specifies a set of eight VLANs, with the first
octet specifying VLANs 1 through 8, the second octet specifying VLANs 9
through 16, etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit represents the
lowest numbered VLAN. Thus, each VLAN is represented by a single bit
within the value of this object. A bit with a value of '1' indicates
that the loop detection is enabled globally for the VLAN; the loop
detection is disabled globally for the VLAN if its bit has a value of
'0'. The 4095th and 4096th bits must be have a value of '0'."
::= { hh3cLpbkdtObjects 2 }
hh3cLpbkdtAction OBJECT-TYPE
SYNTAX Hh3cLpbkdtActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global loopback detection action on the port on which a loop is
detected. The global action applies to all ports. The per-port action
takes precedence over the global action."
DEFVAL { none }
::= { hh3cLpbkdtObjects 3 }
hh3cLpbkdtIntervalTime OBJECT-TYPE
SYNTAX Integer32(1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval at which loop detection frames are transmitted."
DEFVAL { 30 }
::= { hh3cLpbkdtObjects 4 }
hh3cLpbkdtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cLpbkdtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about the loop detection configurations
and status for individual ports."
::= { hh3cLpbkdtObjects 5 }
hh3cLpbkdtPortEntry OBJECT-TYPE
SYNTAX Hh3cLpbkdtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information of a specified port."
INDEX { hh3cLpbkdtPortIfIndex }
::= { hh3cLpbkdtPortTable 1 }
Hh3cLpbkdtPortEntry ::= SEQUENCE
{
hh3cLpbkdtPortIfIndex InterfaceIndex,
hh3cLpbkdtPortVlanEnable OCTET STRING,
hh3cLpbkdtPortAction Hh3cLpbkdtActionType,
hh3cLpbkdtPortLoopbacked TruthValue
}
hh3cLpbkdtPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port."
::={ hh3cLpbkdtPortEntry 1 }
hh3cLpbkdtPortVlanEnable OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the loop detection is enabled on the port for the VLANs. Each
octet within this value specifies a set of eight VLANs, with the first
octet specifying VLANs 1 through 8, the second octet specifying VLANs 9
through 16, etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit represents the
lowest numbered VLAN. Thus, each VLAN is represented by a single bit
within the value of this object. A bit with a value of '1' indicates
that the loop detection is enabled on the port for the VLAN; the loop
detection is disabled on the port for the VLAN if its bit has a value of
'0'. The 4095th and 4096th bits must be have a value of '0'."
::={ hh3cLpbkdtPortEntry 2 }
hh3cLpbkdtPortAction OBJECT-TYPE
SYNTAX Hh3cLpbkdtActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback detection action on the port on which a loop is detected. The
per-port action takes precedence over the global action."
::={ hh3cLpbkdtPortEntry 3 }
hh3cLpbkdtPortLoopbacked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the port is looped."
::={ hh3cLpbkdtPortEntry 4 }
END