mibs/MIBS/comware/HH3C-RBAC-MIB

-- =================================================================
-- Copyright (c) 2004-2014 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: This MIB is to provide the definition of the RBAC
--              (Role Based Access Control) system.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2014-08-08 Initial version, created by Xu Yang
-- =================================================================

HH3C-RBAC-MIB DEFINITIONS ::= BEGIN

IMPORTS
    hh3cCommon
        FROM HH3C-OID-MIB
    Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI
    TruthValue, RowStatus, StorageType, TEXTUAL-CONVENTION
        FROM SNMPv2-TC;

hh3cRbac MODULE-IDENTITY
    LAST-UPDATED "201408081547Z"
    ORGANIZATION
        "New H3C Tech. Co., Ltd."
    CONTACT-INFO
        "Platform Team New H3C Tech. Co., Ltd.
         Hai-Dian District Beijing P.R. China
         http://www.h3c.com
         Zip:100085"
    DESCRIPTION
        "This MIB is to provide the definition of the RBAC
        (Role Based Access Control) system."
    REVISION "201408081547Z"
    DESCRIPTION
        "The initial revision of this MIB module."
    ::= { hh3cCommon 158 }

-- Top-level structure of MIB
hh3cRbacNotifications  OBJECT IDENTIFIER ::= { hh3cRbac 0 }
hh3cRbacObjects  OBJECT IDENTIFIER ::= { hh3cRbac 1 }

hh3cRbacInfo  OBJECT IDENTIFIER
    ::= { hh3cRbacObjects 1 }

hh3cRbacConfig  OBJECT IDENTIFIER
    ::= { hh3cRbacObjects 2 }


-- definition of textual conventions

Hh3cResourceType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "A User can be restricted from accessing resources by RBAC resource
        access policies.  There are four types of resource access policies as
        below:
        vlan(0)
                Bit value of 0 indicates that the user has access
                to no VLANs.
                Bit value of 1 indicates that the user has access
                to all VLANs.
                A user can be selectively assigned access to VLANs
                by configuring entries in the 'hh3cRbacPolicyTable'.
        interface(1)
                Bit value of 0 indicates that the user has access
                to no interfaces.
                Bit value of 1 indicates that the user has access
                to all interfaces.
                A user can be selectively assigned access to interfaces
                by configuring entries in the 'hh3cRbacPolicyTable'.
        vrf(2)
                Bit value of 0 indicates that the user has access
                to no VRFs.
                Bit value of 1 indicates that the user has access
                to all VRFs.
                A user can be selectively assigned access to VRFs
                by configuring entries in the 'hh3cRbacPolicyTable'.
        seczone(3)
                Bit value of 0 indicates that the user has access
                to no security zones.
                Bit value of 1 indicates that the user has access
                to all security zones.
                A user can be selectively assigned access to security zones
                by configuring entries in the 'hh3cRbacPolicyTable'."
    SYNTAX BITS
        {
            vlan(0),
            interface(1),
            vrf(2),
            seczone(3)
        }

Hh3cRuleType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "There are two types of rules.  List as below:
        system: pre-defined by system and isn't editable.
        user: defined by user and is editable.
        "
    SYNTAX INTEGER
        {
            system(1),
            user(2)
        }

Hh3cRuleOperation ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Privileges of a rule.
        exec  - execute operation
        read  - Read operation
        write - Write operation
        Note that if an operation is not supported by an entity,
        the operation does not apply to the entity."
    SYNTAX BITS
        {
            exec(0),
            read(1),
            write(2)
        }

Hh3cRuleAction ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "This indicates the action of a rule that defines the access privileges.
        permit  - permit the privileges
        deny    - deny the privileges
        "
    SYNTAX INTEGER
        {
            permit(1),
            deny(2)
        }

Hh3cEntityType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "This indicates the type of the entity in a rule."
    SYNTAX INTEGER
        {
            unknown(1),
            command(2),
            feature(3),
            featuregroup(4),
            webmenu(5),
            xmlelement(6),
            oid(7)
        }


--
-- nodes defined
--

hh3cRbacRoleDefaultEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object controls if an authenticated user can access the system
        when he or she isn't authorized any user roles.
        The default value is false."
    DEFVAL { false }
    ::= { hh3cRbacConfig 1 }

hh3cRbacRoleDefaultRoleName OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (1..63))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "If hh3cRbacRoleDefaultEnable is true, this object specifies
        the user role applied to the user when he or she accesses
        the system without any authorized user roles.
        If this object is not configured, the default user role
        applied is listed as below:
        network-operator - When login to the default MDC or default Context.
        mdc-operator     - When login to the non-default MDC.
        context-operator - When login to a non-default Context.
        "
    ::= { hh3cRbacConfig 2 }

--
-- definition of hh3cRbacRoleTable
--

hh3cRbacRoleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cRbacRoleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table shows the basic configuration information
        about all user roles."
    ::= { hh3cRbacConfig 3 }

hh3cRbacRoleEntry OBJECT-TYPE
    SYNTAX Hh3cRbacRoleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the hh3cRbacRoleTable.
        One entry per role defined on the device."
    INDEX { hh3cRbacRoleName }
    ::= { hh3cRbacRoleTable 1 }

Hh3cRbacRoleEntry ::=
    SEQUENCE {
        hh3cRbacRoleName            OCTET STRING,
        hh3cRbacRoleDescription     OCTET STRING,
        hh3cRbacRoleResourceAccess  Hh3cResourceType,
        hh3cRbacRoleStorageType     StorageType,
        hh3cRbacRoleRowStatus       RowStatus
    }

hh3cRbacRoleName OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (1..63))
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The name of a role."
    ::= { hh3cRbacRoleEntry 1 }

hh3cRbacRoleDescription OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Description of the role."
    ::= { hh3cRbacRoleEntry 2 }

hh3cRbacRoleResourceAccess OBJECT-TYPE
    SYNTAX Hh3cResourceType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Defines the default access to the resources to which access can be
        controlled.  For example a role which has access to all VLANs,
        all Interfaces, no VRF and no security zone will be 0011."
    ::= { hh3cRbacRoleEntry 3 }

hh3cRbacRoleStorageType OBJECT-TYPE
    SYNTAX          StorageType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Storage type of this row."
    ::= { hh3cRbacRoleEntry 4 }

hh3cRbacRoleRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Status of this row."
    ::= { hh3cRbacRoleEntry 5 }

--
-- definition of hh3cRbacRuleTable
--

hh3cRbacRuleTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cRbacRuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table shows the configuration information about rules
        in all user roles."
    ::= { hh3cRbacConfig 4 }


hh3cRbacRuleEntry OBJECT-TYPE
    SYNTAX Hh3cRbacRuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the hh3cRbacRuleTable.
        One entry indicates one rule in a role."
    INDEX {
        hh3cRbacRoleName,
        hh3cRbacRuleType,
        hh3cRbacRuleNumber
    }
    ::= { hh3cRbacRuleTable 1 }

Hh3cRbacRuleEntry ::=
    SEQUENCE {
        hh3cRbacRuleType            Hh3cRuleType,
        hh3cRbacRuleNumber          Unsigned32,
        hh3cRbacRuleAction          Hh3cRuleAction,
        hh3cRbacRuleOperation       Hh3cRuleOperation,
        hh3cRbacRuleEntityType      Hh3cEntityType,
        hh3cRbacRuleEntity          OCTET STRING,
        hh3cRbacRuleRowStatus       RowStatus
    }


hh3cRbacRuleType OBJECT-TYPE
    SYNTAX Hh3cRuleType
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The type of a rule."
    ::= { hh3cRbacRuleEntry 1 }

hh3cRbacRuleNumber OBJECT-TYPE
    SYNTAX Unsigned32 (1..256)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The index of rules in one role.  There are two kinds of rules in a role.
        One is system defined, the other is user defined.  The total numbers
        of user defined rules is 1024.
        In one role, the user defined rules will be applied first and then
        the system defined rules.
        For the rules of same type, the following guidelines will be applied:
        Non-OID: If two rules of the same entity type conflict,
        the rule with the higher index takes effect.
        OID: If the MIB node specified in a rule is a child node of
        the MIB nodes specified in other rules, only this rule takes effect.
        If the same OID is specified in multiple rules, the rule with
        the higher index takes effect."
    ::= { hh3cRbacRuleEntry 2 }

hh3cRbacRuleAction OBJECT-TYPE
    SYNTAX Hh3cRuleAction
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The action of a rule."
    ::= { hh3cRbacRuleEntry 3 }

hh3cRbacRuleOperation OBJECT-TYPE
    SYNTAX Hh3cRuleOperation
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Privileges of a rule."
    ::= { hh3cRbacRuleEntry 4 }

hh3cRbacRuleEntityType OBJECT-TYPE
    SYNTAX Hh3cEntityType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This indicates the type of the entity in a rule.
        There are seven types of entity as below:
        unknown: invalid.
        command: a command or a set of commands that match a regular expression.
        feature: a feature which contains a set of commands.
        featuregroup: a group of features.
        webmenu: web menus.
        xmlelement: XML elements.
        oid: the specified MIB node and its child nodes."
    ::= { hh3cRbacRuleEntry 5 }

hh3cRbacRuleEntity OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This indicates the entity that the privileges of rule apply to.
        It is may be a regular expression of commands, feature name,
        feature group name, web menu, xml element or oid.
        If the type of entity is feature or webmenu or xmlelement and the
        entity is a zero length string, then this rules applies to all
        the features or web menus or xml elements."
    ::= { hh3cRbacRuleEntry 6 }

hh3cRbacRuleRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Status of this rule."
    ::= { hh3cRbacRuleEntry 7 }

--
-- definition of hh3cRbacPolicyTable
--

hh3cRbacPolicyTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cRbacPolicyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table shows the configuration information about resource
        access policies in all user roles.  A role may be restricted
        from accessing various resources of a device.  This table
        lists the resources that a role can access."
    ::= { hh3cRbacConfig 5 }


hh3cRbacPolicyEntry OBJECT-TYPE
    SYNTAX Hh3cRbacPolicyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the hh3cRbacPolicyTable.
        One entry indicates an accessible resource.
        If a role named 'R' can access VLAN1 to VLAN10,
        then there will be 10 entries in this table.
        There are two objects to specify the resource
        in this table.
        If the value of 'hh3cRbacPolicyType' is 'vlan' or
        'interface', the column 'hh3cRbacPolicyValue' is a
        four octets value which means vlan ID or IfIndex.
        If the value of 'hh3cRbacPolicyType' is 'vrf' or 'seczone',
        the column 'hh3cRbacPolicyValue' is a string indicating
        the name of the VRF or security zone."
    INDEX {
        hh3cRbacRoleName,
        hh3cRbacPolicyType,
        hh3cRbacPolicyValue
    }
    ::= { hh3cRbacPolicyTable 1 }

Hh3cRbacPolicyEntry ::=
    SEQUENCE {
        hh3cRbacPolicyType            INTEGER,
        hh3cRbacPolicyValue           OCTET STRING,
        hh3cRbacPolicyRowStatus       RowStatus
    }

hh3cRbacPolicyType OBJECT-TYPE
    SYNTAX INTEGER
        {
            vlan(1),
            interface(2),
            vrf(3),
            seczone(4)
        }
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the type of the resource
        access policy of this entry."
    ::= { hh3cRbacPolicyEntry 1 }

hh3cRbacPolicyValue OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE(1..64))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object identifies the resource this role can access.
        If the value of 'hh3cRbacPolicyType' is 'vlan' or
        'interface', the column 'hh3cRbacPolicyValue' is a
        four-octet-value which means vlan ID or IfIndex.
        If the value of 'hh3cRbacPolicyType' is 'vrf' or 'seczone',
        the column 'hh3cRbacPolicyValue' is a string indicating
        the name of the VRF or security zone."
    ::= { hh3cRbacPolicyEntry 2 }

hh3cRbacPolicyRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Status of this row."
    ::= { hh3cRbacPolicyEntry 3 }

--
-- definition of hh3cRbacFeatureGroupTable
--

hh3cRbacFeatureGroupTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cRbacFeatureGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table shows the configuration information about
        feature groups on a device."
    ::= { hh3cRbacConfig 6 }


hh3cRbacFeatureGroupEntry OBJECT-TYPE
    SYNTAX Hh3cRbacFeatureGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the hh3cRbacFeatureGroupTable.
        One entry indicates a feature in particular group."
    INDEX {
        hh3cRbacFeatureGroupName
    }
    ::= { hh3cRbacFeatureGroupTable 1 }

Hh3cRbacFeatureGroupEntry ::=
    SEQUENCE {
        hh3cRbacFeatureGroupName            OCTET STRING,
        hh3cRbacFeatureGroupRowStatus       RowStatus
    }

hh3cRbacFeatureGroupName OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE(1..31))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the name of a feature group."
    ::= { hh3cRbacFeatureGroupEntry 1 }

hh3cRbacFeatureGroupRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Status of this row."
    ::= { hh3cRbacFeatureGroupEntry 2 }

--
-- definition of hh3cRbacFeaturesInGroupTable
--

hh3cRbacFeatureInGroupTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cRbacFeatureInGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table shows the configuration information about
        features in feature groups on a device."
    ::= { hh3cRbacConfig 7 }


hh3cRbacFeatureInGroupEntry OBJECT-TYPE
    SYNTAX Hh3cRbacFeatureInGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the hh3cRbacFeaturesInGroupTable.
        One entry indicates a feature in a particular group.
        If a newly created feature group doesn't contain any
        feature, there's no entry appearing in this table."
    INDEX {
        hh3cRbacFeatureGroupName,
        hh3cRbacFeatureNameInGroup
    }
    ::= { hh3cRbacFeatureInGroupTable 1 }

Hh3cRbacFeatureInGroupEntry ::=
    SEQUENCE {
        hh3cRbacFeatureNameInGroup            OCTET STRING,
        hh3cRbacFeatureInGroupRowStatus       RowStatus
    }

hh3cRbacFeatureNameInGroup OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE(1..15))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the name of a feature in the feature group."
    ::= { hh3cRbacFeatureInGroupEntry 1 }

hh3cRbacFeatureInGroupRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Status of this row."
    ::= { hh3cRbacFeatureInGroupEntry 2 }

--
-- definition of hh3cRbacFeatureTable
--

hh3cRbacFeatureTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cRbacFeatureEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table shows the information about features on a device."
    ::= { hh3cRbacInfo 1 }

hh3cRbacFeatureEntry OBJECT-TYPE
    SYNTAX Hh3cRbacFeatureEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the hh3cRbacFeatureTable.
        One entry indicates information about a feature on a device."
    INDEX {
        hh3cRbacFeatureName
    }
    ::= { hh3cRbacFeatureTable 1 }

Hh3cRbacFeatureEntry ::=
    SEQUENCE {
        hh3cRbacFeatureName            OCTET STRING,
        hh3cRbacFeatureDescription     OCTET STRING
    }

hh3cRbacFeatureName OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE(1..15))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the name of a feature."
    ::= { hh3cRbacFeatureEntry 1 }

hh3cRbacFeatureDescription OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE(1..63))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the introduction of the feature."
    ::= { hh3cRbacFeatureEntry 2 }

END