david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/comware/HH3C-SPLAT-INF-MIB

1909 lines
71 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ==================================================================
-- Copyright (c) 2004-2019 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: Interface Management MIB
-- Reference:
-- Version: V4.1
-- History:
-- V1.0 (1) Created by Zhangshilin, 2001.06.29
-- (2) Revised by Qizhenglin, 2002.01.08
-- V1.1 2004/7/20 Add PortList and VlanIndex define
-- V1.2 2004/8/05 Add hh3cifEthernetIsolate and hh3cIsolateGroupMax
-- by Chenshixing
-- V1.3 2004/9/08 add fabric value to hh3cifVLANType object and
-- change the DESCRIPTION by chenshixing
-- 2004/9/08 1.change the DESCRIPTION and the range of
-- SYNTAX INTEGER from (5..100) to (1..100)
-- in hh3cifMcastControl object by wangyingxia
-- 2.add the hh3cifPpsMcastControl object
-- by wangyingxia
-- 3.change the status in hh3cLswVlanMngObject
-- to current by gaolong
-- V1.4 2004-10-12 updated by gaolong
-- Import TEXTUAL-CONVENTION, OBJECT-IDENTITY, Unsigned32.
-- Relocate hh3cLswL2InfMib MODULE-IDENTITY clause.
-- Change SYNTAX clause type of VlanIndex from INTEGER to Unsigned32.
-- Change MAX-ACCESS clause vlaue of hh3cifClearStat and hh3cifEthernetTest
-- from write-only to read-write.
-- Change value of hh3cifAggregateModel, hh3cdot1qVlanType, hh3cVlanInterfaceFrameType
-- and hh3cifEthernetMdi from underscores to hyphens.
-- Change value of hh3cifMacAddrLearnMode, beginning with lowercase.
-- V1.5 2004-11-15
-- Add the object hh3cdot1qVlanBcastSuppressionPPS by lihaijun
-- Adjust the format of the description of hh3cdot1qVlanBroadcastSuppression
-- V1.6 2004-12-2
-- Add the object hh3cGlobalBroadcastMaxPps by zhanggang
-- Add the object hh3cGlobalBroadcastMaxRatio by zhanggang
-- Add hh3cifVlanVPNStatus and hh3cBpduTunnelStatus by caiqiang
-- Add hh3cVlanInterfaceIpMethod by wangchao
-- V1.7 2005-01-22
-- Remove the content of hh3cLswVlan from this MIB to HH3C-LswVLAN-MIB
-- Remove SnmpAdminString
-- V1.8 2005-2-2
-- Add the object hh3cifPpsBcastDisValControl by zhangjianwei
-- V1.9 2005-03-08
-- Add hh3cifUniSuppressionStep, hh3cifPpsUniSuppressionMax, hh3cifMulSuppressionStep,
-- hh3cifPpsMulSuppressionMax, hh3cifUniSuppression, hh3cifPpsUniSuppression,
-- hh3cifMulSuppression, hh3cifPpsMulSuppression by wanghaisheng
-- V2.0 2005-06-14
-- Add the object hh3cifComboActivePort by majun and adjust format
-- V2.1 2005-06-30
-- Add the object hh3cifVlanVPNUplinkStatus, hh3cifVlanVPNTPID,
-- hh3cVlanVPNTPIDMode and hh3cVlanVPNTPID by hejunwei
-- Add hh3cifUnknownPacketDropMul, hh3cifUnknownPacketDropUni by wangyupeng
-- Add hh3cifBMbpsMulSuppressionMax, hh3cifBMbpsMulSuppression,
-- hh3cifBKbpsMulSuppressionMax, hh3cifBKbpsMulSuppressionStep
-- and hh3cifBKbpsMulSuppression by lichunyan
-- Update decription of MIB objects by gaolong
-- V2.2 2005-09-05
-- Add the object hh3cifIsolateGroupID, hh3cifisUplinkPort,
-- hh3cPortIsolateGroupTable, hh3cPortIsolateGroupEntry,
-- hh3cPortIsolateGroupIndex, hh3cPortIsolateUplinkIfIndex,
-- hh3cPortIsolateGroupRowStatus by huzinan
-- V2.3 2005-10-13
-- Add the object hh3cPortIsolateGroupDescription by hejunwei
-- V2.4 2005-11-15
-- Add the value 24000M to hh3cifEthernetSpeed by wanglirong
-- V2.5 2006-01-16
-- Add hh3cMaxMacLearnRange by zhangyinfei
-- Change the DESCRIPTION and the range of hh3cMaxMacLearn by zhangyinfei
-- V2.6 2006-01-03
-- Remove the value range from the definition of hh3cifXXBasePortIndex
-- by wangzhaoyan
-- V2.7 2006-02-11
-- Modify description of hh3cifXXBasePortIndex and hh3cifXXDevPortIndex
-- Modify description of hh3cifHybridTaggedVlanListLow, hh3cifHybridTaggedVlanListHigh,
-- hh3cifHybridUnTaggedVlanListLow and hh3cifHybridUnTaggedVlanListHigh
-- Modify some wrong format of the description
-- V2.8 2006-03-14
-- Add hh3cifEthernetAutoSpeedMask, hh3cifEthernetAutoSpeed in
-- hh3cethernetTable and SpeedModeFlag definition by Jin Yongfeng.
-- V2.9 2006-04-24
-- Remove value range of hh3cifEthernetMTU by Chenxi.
-- V3.0 2006-04-30
-- Add hh3cifBMbpsUniSuppressionMax, hh3cifBMbpsUniSuppression,
-- hh3cifBKbpsUniSuppressionMax, hh3cifBKbpsUniSuppressionStep
-- and hh3cifBKbpsUniSuppression by lichunyan.
-- V3.1 2006-09-27
-- hh3cifComboActivePort is obsoleted in hh3cifXXTable.
-- hh3cifComboPortTable is added for combo interface.
-- hh3cifComboActivePort is replaced with hh3cifComboPortCurActive.
-- V3.2 2009-04-11
-- Add hh3cifOutPayloadOctets, hh3cifInPayloadOctets, hh3cifInErrorPktsRate,
-- hh3cifInPkts, hh3cifInNormalPkts, hh3cifOutPkts by lisong.
-- V3.3 2011-11-08
-- Add the value s40000M and s100000M to SpeedModeFlag and
-- hh3cifEthernetSpeed by xiedong.
-- V3.4 2012-09-29
-- Modify description of hh3cifClearStat by xiedong.
-- 2012-11-03
-- Add hh3cifPktBufTable, hh3cifPktBufEntry, hh3cifPktBufFree,
-- hh3cifPktBufInit, hh3cifPktBufMin, hh3cifPktBufMiss by chenkaiping
-- V3.5 2013-08-17
-- Add hh3cifPortProtocolStatTable by yangxiaoren.
-- V3.6 2014-02-08
-- Modify description of hh3cifUniSuppression, hh3cifMulSuppression and
-- hh3cifMcastControl, modify value list of hh3cifMcastControl by huhonghui,
-- for supporting value 0.
-- V3.7 2015-10-14
-- Add hh3cifMulSuppressionFlag by chenzhouhui.
-- Modify description of hh3cifMulSuppression and hh3cifPpsMulSuppression by chenzhouhui.
-- Add hh3cifPktBufInDrop and hh3cifPktBufEgDrop to hh3cifPktBufTable,
-- add hh3cifQueuePktBufTable by zhangji.
-- V3.8 2016-07-02
-- Add the values s2500M, s5000M, s20000M, s25000M and s50000M to SpeedModeFlag
-- and hh3cifEthernetSpeed by yuhaiyan.
-- V3.9 2018-10-09
-- Modify description of hh3cifComboPortCurActive,
-- modify value list of hh3cifComboPortCurActive by jinyiting,
-- for supporting value 4.
-- V4.0 2019-06-13
-- Add hh3cifQueueBufUsageIn5Seconds, hh3cifQueueBufUsageIn1Minute, hh3cifQueueBufUsageIn5Minutes
-- to hh3cifQueuePktBufTable by mazhixing.
-- V4.1 2019-08-03
-- Add the values s200000M, s400000M to SpeedModeFlag
-- and hh3cifEthernetSpeed by mazhixing.
-- ==================================================================
--
-- Variables and types be imported
--
-- ==================================================================
HH3C-LswINF-MIB DEFINITIONS ::= BEGIN
IMPORTS
RowStatus, DisplayString, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64, Unsigned32, Counter32
FROM SNMPv2-SMI
ifIndex, InterfaceIndex
FROM IF-MIB
hh3clswCommon
FROM HH3C-OID-MIB;
hh3cLswL2InfMib MODULE-IDENTITY
LAST-UPDATED "201908030000Z"
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
""
REVISION "201908030000Z"
DESCRIPTION
"Add the values s200000M and s400000M to SpeedModeFlag and hh3cifEthernetSpeed"
REVISION "201906130000Z"
DESCRIPTION
"Add hh3cifQueueBufUsageIn5Seconds, hh3cifQueueBufUsageIn1Minute, hh3cifQueueBufUsageIn5Minutes to hh3cifQueuePktBufTable"
REVISION "201607020000Z"
DESCRIPTION
"Add the values s2500M, s5000M, s20000M, s25000M and s50000M to SpeedModeFlag and hh3cifEthernetSpeed"
REVISION "201510140000Z"
DESCRIPTION
"Add hh3cifPktBufInDrop and hh3cifPktBufEgDrop to hh3cifPktBufTable,
hh3cifMulSuppressionFlag, and hh3cifQueuePktBufTable, modify description of hh3cifMulSuppression and hh3cifPpsMulSuppression"
REVISION "200106290000Z"
DESCRIPTION
"Initial version."
::= { hh3clswCommon 5 }
-- =============================================================
-- Textual Conventions
-- =============================================================
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32 (0..4294967295)
DropDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Representing the direction of dropping packets, if applicable."
SYNTAX INTEGER {
disable (1),
enableInbound (2),
enableOutbound (3),
enableBoth (4)
}
SpeedModeFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of Negotiable Speed mode."
SYNTAX BITS
{
s10M(0), -- 10M speed
s100M(1), -- 100M speed
s1000M(2), -- 1000M speed
s10000M(3), -- 10000M speed
s24000M(4), -- 24000M speed
s40000M(5), -- 40000M speed
s100000M(6), -- 100000M speed
s2500M(7), -- 2500M speed
s5000M(8), -- 5000M speed
s20000M(9), -- 20000M speed
s25000M(10), -- 25000M speed
s50000M(11), -- 50000M speed
s200000M(12), -- 200000M speed
s400000M(13) -- 400000M speed
}
-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
hh3cLswExtInterface OBJECT IDENTIFIER ::= { hh3clswCommon 1 }
hh3cifXXTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIfXXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Extended interface information table."
::= { hh3cLswExtInterface 1 }
hh3cifXXEntry OBJECT-TYPE
SYNTAX Hh3cIfXXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of extended interface information table."
INDEX { ifIndex }
::= { hh3cifXXTable 1}
Hh3cIfXXEntry ::=
SEQUENCE {
hh3cifUnBoundPort TruthValue ,
hh3cifISPhyPort TruthValue ,
hh3cifAggregatePort TruthValue ,
hh3cifMirrorPort TruthValue ,
hh3cifVLANType INTEGER ,
hh3cifMcastControl INTEGER ,
hh3cifFlowControl TruthValue ,
hh3cifSrcMacControl TruthValue ,
hh3cifClearStat INTEGER,
hh3cifXXBasePortIndex INTEGER,
hh3cifXXDevPortIndex INTEGER,
hh3cifPpsMcastControl Integer32,
hh3cifPpsBcastDisValControl INTEGER,
hh3cifUniSuppressionStep Integer32,
hh3cifPpsUniSuppressionMax Integer32,
hh3cifMulSuppressionStep Integer32,
hh3cifPpsMulSuppressionMax Integer32,
hh3cifUniSuppression Integer32,
hh3cifPpsUniSuppression Integer32,
hh3cifMulSuppression Integer32,
hh3cifPpsMulSuppression Integer32,
hh3cifComboActivePort INTEGER,
hh3cifBMbpsMulSuppressionMax Integer32,
hh3cifBMbpsMulSuppression Integer32,
hh3cifBKbpsMulSuppressionMax Integer32,
hh3cifBKbpsMulSuppressionStep Integer32,
hh3cifBKbpsMulSuppression Integer32,
hh3cifUnknownPacketDropMul DropDirection,
hh3cifUnknownPacketDropUni DropDirection,
hh3cifBMbpsUniSuppressionMax Integer32,
hh3cifBMbpsUniSuppression Integer32,
hh3cifBKbpsUniSuppressionMax Integer32,
hh3cifBKbpsUniSuppressionStep Integer32,
hh3cifBKbpsUniSuppression Integer32,
hh3cifOutPayloadOctets Counter64,
hh3cifInPayloadOctets Counter64,
hh3cifInErrorPktsRate Integer32,
hh3cifInPkts Counter64,
hh3cifInNormalPkts Counter64,
hh3cifOutPkts Counter64,
hh3cifMulSuppressionFlag INTEGER
}
hh3cifUnBoundPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether it is the unbound port. (true indicates that the port is
the main port of the aggregation or the port does not participate
in the aggregation.)"
::= { hh3cifXXEntry 1 }
hh3cifISPhyPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether it is a physical interface."
::= { hh3cifXXEntry 2 }
hh3cifAggregatePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether it is the aggregated port. (if the port participates
in the aggregation, this value is true.)"
::= { hh3cifXXEntry 3 }
hh3cifMirrorPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether it is a mirror port."
::= { hh3cifXXEntry 4 }
hh3cifVLANType OBJECT-TYPE
SYNTAX INTEGER
{
vLANTrunk (1),
access (2),
hybrid (3),
fabric (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port."
::= { hh3cifXXEntry 5 }
hh3cifMcastControl OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast storm suppression with the step length of 1,
ranging from 0 to 100 percent.
In some products the step is 5, ranging from 0 to 100."
::= { hh3cifXXEntry 6 }
hh3cifFlowControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flow control status."
::= { hh3cifXXEntry 7 }
hh3cifSrcMacControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether to filter by source MAC address."
::= { hh3cifXXEntry 8 }
hh3cifClearStat OBJECT-TYPE
SYNTAX INTEGER
{
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear specify port statistics. Operation read is not supported."
::= { hh3cifXXEntry 9 }
hh3cifXXBasePortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index number of the port and the first port index of the
device is 1."
::= { hh3cifXXEntry 10 }
hh3cifXXDevPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device index of the port."
::= { hh3cifXXEntry 11 }
hh3cifPpsMcastControl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The broadcast suppression with pps(packet per second) type.
The max value is determined by the port type and product."
::= { hh3cifXXEntry 12 }
hh3cifPpsBcastDisValControl OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control the port's pps(packet per second) broadcast suppression.
When the port is enabled, its pps broadcast suppression value is the
global disperse value, and when disabled, it doesn't suppress broadcast."
::= { hh3cifXXEntry 13 }
hh3cifUniSuppressionStep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The step of unicast suppression in ratio mode."
::= { hh3cifXXEntry 14 }
hh3cifPpsUniSuppressionMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The max pps(packet per second) value of unicast suppression
in pps mode."
::= { hh3cifXXEntry 15 }
hh3cifMulSuppressionStep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The step of multicast suppression in ratio mode."
::= { hh3cifXXEntry 16 }
hh3cifPpsMulSuppressionMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The max pps(packet per second) value of multicast suppression
in pps mode."
::= { hh3cifXXEntry 17 }
hh3cifUniSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The unicast suppression with the ranging from 0 to 100 percent
in ratio mode.
The step is determined by hh3cifUniSuppressionStep."
::= { hh3cifXXEntry 18 }
hh3cifPpsUniSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The unicast suppression in pps(packet per second) mode.
The max value is determined by hh3cifPpsUniSuppressionMax."
::= { hh3cifXXEntry 19 }
hh3cifMulSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast suppression with ranging from 0 to 100 percent
in ratio mode.
The step is determined by hh3cifMulSuppressionStep.
If hh3cifMulSuppressionFlag is 2 it means only unknown
traffic suppression."
::= { hh3cifXXEntry 20 }
hh3cifPpsMulSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast suppression in pps(packet per second) mode.
The max pps value is determined by hh3cifPpsMulSuppressionMax.
If hh3cifMulSuppressionFlag is 2 it means only unknown
traffic suppression."
::= { hh3cifXXEntry 21 }
hh3cifComboActivePort OBJECT-TYPE
SYNTAX INTEGER
{
fiber (1), -- Optical port
copper (2), -- Electrical port
na (3) -- Not applicable
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION "Active port on combo interface."
::= { hh3cifXXEntry 22 }
hh3cifBMbpsMulSuppressionMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the multicast suppression with bandwidth-based(Mbps)
that a port can be configured."
::= { hh3cifXXEntry 23 }
hh3cifBMbpsMulSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"With bandwidth-based multicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the multicast suppession with bandwidth-based(Mbps)
is the value of hh3cifBMbpsMulSuppressionMax in the entry.
The default value of hh3cifBMbpsMulSuppression is the value of
hh3cifBMbpsMulSuppressionMax."
::= { hh3cifXXEntry 24 }
hh3cifBKbpsMulSuppressionMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the multicast suppression with bandwidth-based(Kbps)
that a port can be configured."
::= { hh3cifXXEntry 25 }
hh3cifBKbpsMulSuppressionStep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The step of multicast suppression with bandwidth-based(Kbps)."
::= { hh3cifXXEntry 26 }
hh3cifBKbpsMulSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"With bandwidth-based multicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the multicast suppession with bandwidth-based(Kbps)
is the value of hh3cifBKbpsMulSuppressionMax in the entry.
The value of hh3cifBKbpsMulSuppression must be multiple of the
value of hh3cifBKbpsMulSuppressionStep.
The default value of hh3cifBKbpsMulSuppression is the value of
hh3cifBKbpsMulSuppressionMax."
::= { hh3cifXXEntry 27 }
hh3cifUnknownPacketDropMul OBJECT-TYPE
SYNTAX DropDirection
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control the port's unknown-multicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-multicast packets in inbound direction. When
outbound direction is enabled on this port, the port will
drop unknown-multicast packets in outbound direction. When
both directions are enabled on this port, the port will
drop unknown-multicast packets in both inbound and outbound
directions."
DEFVAL { disable }
::= { hh3cifXXEntry 28 }
hh3cifUnknownPacketDropUni OBJECT-TYPE
SYNTAX DropDirection
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Control the port's unknown-unicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-unicast packets in inbound direction. When
outbound direction is enabled on this port, the port will
drop unknown-unicast packets in outbound direction. When
both directions are enabled on this port, the port will
drop unknown-unicast packets in both inbound and outbound
directions."
DEFVAL { disable }
::= { hh3cifXXEntry 29 }
hh3cifBMbpsUniSuppressionMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum value of the unicast suppression with bandwidth-based
(Mbps) that a port can be configured."
::= { hh3cifXXEntry 30 }
hh3cifBMbpsUniSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
With bandwidth-based Unicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the unicast suppession with bandwidth-based(Mbps)
is the value of hh3cifBMbpsUniSuppressionMax in the entry.
The default value of hh3cifBMbpsUniSuppression is the value of
hh3cifBMbpsUniSuppressionMax."
::= { hh3cifXXEntry 31 }
hh3cifBKbpsUniSuppressionMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum value of the unicast suppression with bandwidth-based
(Kbps) that a port can be configured."
::= { hh3cifXXEntry 32 }
hh3cifBKbpsUniSuppressionStep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The step of unicast suppression with bandwidth-based(Kbps)."
::= { hh3cifXXEntry 33 }
hh3cifBKbpsUniSuppression OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
With bandwidth-based unicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the unicast suppession with bandwidth-based(Kbps)
is the value of hh3cifBKbpsUniSuppressionMax in the entry.
The value of hh3cifBKbpsUniSuppression must be multiple of the
value of hh3cifBKbpsUniSuppressionStep.
The default value of hh3cifBKbpsUniSuppression is the value of
hh3cifBKbpsUniSuppressionMax."
::= { hh3cifXXEntry 34 }
hh3cifOutPayloadOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The actual output octets of the interface."
::= { hh3cifXXEntry 35 }
hh3cifInPayloadOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The actual input octets of the interface."
::= { hh3cifXXEntry 36 }
hh3cifInErrorPktsRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The rate of inbound error packets on the interface."
::= { hh3cifXXEntry 37 }
hh3cifInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The number of packets received on the interface."
::= { hh3cifXXEntry 38 }
hh3cifInNormalPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The number of normal packets received on the interface."
::= { hh3cifXXEntry 39 }
hh3cifOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The number of packets sent on the interface."
::= { hh3cifXXEntry 40 }
hh3cifMulSuppressionFlag OBJECT-TYPE
SYNTAX INTEGER
{
all (1), -- known and unknown traffic
unknown (2) -- only unknown traffic
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
The multicast suppression flag. If only unknown multicast
traffic is suppressed, the value is unknown(2), and all(1) for suppression of all traffic (unknown and known)."
::= { hh3cifXXEntry 41 }
hh3cifAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIfAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port aggregation information table."
::= { hh3cLswExtInterface 2 }
hh3cifAggregateEntry OBJECT-TYPE
SYNTAX Hh3cIfAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Port aggregation information table."
INDEX { hh3cifAggregatePortIndex }
::= { hh3cifAggregateTable 1}
Hh3cIfAggregateEntry ::=
SEQUENCE {
hh3cifAggregatePortIndex InterfaceIndex,
hh3cifAggregatePortName OCTET STRING,
hh3cifAggregatePortListPorts PortList,
hh3cifAggregateModel INTEGER,
hh3cifAggregateOperStatus RowStatus
}
hh3cifAggregatePortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index number of the main aggregated port."
::= { hh3cifAggregateEntry 1 }
hh3cifAggregatePortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Aggregation group name."
::= { hh3cifAggregateEntry 2 }
hh3cifAggregatePortListPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Portlist of a aggregating."
::= { hh3cifAggregateEntry 3 }
hh3cifAggregateModel OBJECT-TYPE
SYNTAX INTEGER
{
ingress (1),
both (2),
round-robin (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Load sharing mode for the port aggregation."
::= { hh3cifAggregateEntry 4 }
hh3cifAggregateOperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Current operation status of the row."
::= { hh3cifAggregateEntry 5 }
-- ==================================================================
hh3cifHybridPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cifHybridPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Hybrid-port configuration table."
::= { hh3cLswExtInterface 3 }
hh3cifHybridPortEntry OBJECT-TYPE
SYNTAX Hh3cifHybridPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Hybrid-port configuration table."
INDEX { hh3cifHybridPortIndex }
::= { hh3cifHybridPortTable 1}
Hh3cifHybridPortEntry ::=
SEQUENCE {
hh3cifHybridPortIndex INTEGER,
hh3cifHybridTaggedVlanListLow OCTET STRING,
hh3cifHybridTaggedVlanListHigh OCTET STRING,
hh3cifHybridUnTaggedVlanListLow OCTET STRING,
hh3cifHybridUnTaggedVlanListHigh OCTET STRING
}
hh3cifHybridPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index number of Hybrid-port."
::= { hh3cifHybridPortEntry 1 }
hh3cifHybridTaggedVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each tagged VLAN
of the hybrid port is represented by a single bit within
the value of this object. If that bit has a value of '1'
then that VLAN is tagged in the set of VLANs; the VLAN
is not tagged if its bit has a value of '0'."
::= { hh3cifHybridPortEntry 2 }
hh3cifHybridTaggedVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each tagged VLAN
of the hybrid port is represented by a single bit within
the value of this object. If that bit has a value of '1'
then that VLAN is tagged in the set of VLANs; the VLAN
is not tagged if its bit has a value of '0'."
::= { hh3cifHybridPortEntry 3 }
hh3cifHybridUnTaggedVlanListLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each untagged
VLAN of the hybrid port is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is untagged in the set of VLANs; the
VLAN is not untagged if its bit has a value of '0'."
::= { hh3cifHybridPortEntry 4 }
hh3cifHybridUnTaggedVlanListHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each untagged
VLAN of the hybrid port is represented by a single bit
within the value of this object. If that bit has a value of
'1' then that VLAN is untagged in the set of VLANs; the VLAN
is not untagged if its bit has a value of '0'."
::= { hh3cifHybridPortEntry 5 }
-- ==================== Combo port table ============================
hh3cifComboPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cifComboPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Combo-port table."
::= { hh3cLswExtInterface 4 }
hh3cifComboPortEntry OBJECT-TYPE
SYNTAX Hh3cifComboPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hh3cifComboPortTable."
INDEX { hh3cifComboPortIndex }
::= { hh3cifComboPortTable 1}
Hh3cifComboPortEntry ::=
SEQUENCE {
hh3cifComboPortIndex InterfaceIndex,
hh3cifComboPortCurActive INTEGER
}
hh3cifComboPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combo-port interface index. Its value is the same as the value
of ifIndex in ifTable, but only includes indexes of the combo-port
interfaces."
::= { hh3cifComboPortEntry 1 }
hh3cifComboPortCurActive OBJECT-TYPE
SYNTAX INTEGER
{
fiber (1), -- Optical port
copper (2), -- Electrical port
na (3), -- Not applicable
auto (4) -- Identifing the optical/electrical port automatic
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current active interface of combo interfaces. The value 'fiber'
means the interface with fiber connector of the pair of combo-port
interfaces is active. The value 'copper' means the interface with
copper connector of the pair is active. The value 'na' means not
supported. The value 'auto' means the interface identified
the copper or fiber port automatic."
::= { hh3cifComboPortEntry 2 }
-- ======================pkt buf table===============================
hh3cifPktBufTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cifPktBufEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Packet buffer table."
::= { hh3cLswExtInterface 5 }
hh3cifPktBufEntry OBJECT-TYPE
SYNTAX Hh3cifPktBufEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hh3cifPktBufTable."
INDEX { ifIndex }
::= { hh3cifPktBufTable 1}
Hh3cifPktBufEntry ::=
SEQUENCE {
hh3cifPktBufFree Integer32,
hh3cifPktBufInit Integer32,
hh3cifPktBufMin Integer32,
hh3cifPktBufMiss Counter64,
hh3cifPktBufInDrop Counter64,
hh3cifPktBufEgDrop Counter64
}
hh3cifPktBufFree OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packet buffers available for the interface."
::= { hh3cifPktBufEntry 1 }
hh3cifPktBufInit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packet buffers allocated when the interface was created."
::= { hh3cifPktBufEntry 2 }
hh3cifPktBufMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The smallest number of packet buffers available for the interface."
::= { hh3cifPktBufEntry 3 }
hh3cifPktBufMiss OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the interface failed to obtain a packet
buffer. Failure to obtain a buffer indicates that buffers were busy."
::= { hh3cifPktBufEntry 4 }
hh3cifPktBufInDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ingress packets dropped by the interface
because of insufficient data buffer."
::= { hh3cifPktBufEntry 5 }
hh3cifPktBufEgDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of egress packets dropped by the interface
because of insufficient data buffer."
::= { hh3cifPktBufEntry 6 }
-- ======================if queue pkt buf table===============================
hh3cifQueuePktBufTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cifQueuePktBufEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "802.1p queue of the interface packet buffer table."
::= { hh3cLswExtInterface 6 }
hh3cifQueuePktBufEntry OBJECT-TYPE
SYNTAX Hh3cifQueuePktBufEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hh3cifQueuePktBufTable."
INDEX
{
ifIndex,
hh3cifQueueId
}
::= { hh3cifQueuePktBufTable 1}
Hh3cifQueuePktBufEntry ::=
SEQUENCE {
hh3cifQueueId Integer32,
hh3cifQueuePktBufTotal Unsigned32,
hh3cifQueueBufUsed Unsigned32,
hh3cifQueueBufThreCount Counter32,
hh3cifQueueBufUsageIn5Seconds Integer32,
hh3cifQueueBufUsageIn1Minute Integer32,
hh3cifQueueBufUsageIn5Minutes Integer32
}
hh3cifQueueId OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p queue ID of the interface. This value is
used to specify the queue ID of the interface
when the user wants to read one queue of the interface.
The index number 1-8 correspond with 802.1p queue ID 0-7."
::= { hh3cifQueuePktBufEntry 1 }
hh3cifQueuePktBufTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packet buffers available for the interface,
including fixed buffer and shared buffer."
::= { hh3cifQueuePktBufEntry 2 }
hh3cifQueueBufUsed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packet buffers that have been used for each
802.1p queue of the interface."
::= { hh3cifQueuePktBufEntry 3 }
hh3cifQueueBufThreCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that each 802.1p queue of the interface has
exceeded the buffer threshold. The threshold is configurated by user."
::= { hh3cifQueuePktBufEntry 4 }
hh3cifQueueBufUsageIn5Seconds OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer usage in the last 5 seconds for each 802.1p queue of the interface."
::= { hh3cifQueuePktBufEntry 5 }
hh3cifQueueBufUsageIn1Minute OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer usage in the last 1 minute for each 802.1p queue of the interface."
::= { hh3cifQueuePktBufEntry 6 }
hh3cifQueueBufUsageIn5Minutes OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer usage in the last 5 minutes for each 802.1p queue of the interface."
::= { hh3cifQueuePktBufEntry 7 }
-- ========================l2========================================
hh3cLswL2InfMibObject OBJECT IDENTIFIER ::= { hh3cLswL2InfMib 1 }
hh3cSlotPortMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max ports of the slots."
::= { hh3cLswL2InfMibObject 1 }
hh3cSwitchPortMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max ports that this switch includes."
::= { hh3cLswL2InfMibObject 2 }
hh3cifVLANTrunkStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cIfVLANTrunkStatusEntry
MAX-ACCESS not-accessible STATUS current
DESCRIPTION "Gvrp attributes on the VlanTrunk port."
::= { hh3cLswL2InfMibObject 3 }
hh3cifVLANTrunkStatusEntry OBJECT-TYPE
SYNTAX Hh3cIfVLANTrunkStatusEntry
MAX-ACCESS not-accessible STATUS current
DESCRIPTION "Gvrp attributes on the VlanTrunk port."
INDEX { hh3cifVLANTrunkIndex }
::= { hh3cifVLANTrunkStatusTable 1}
Hh3cIfVLANTrunkStatusEntry ::=
SEQUENCE {
hh3cifVLANTrunkIndex InterfaceIndex,
hh3cifVLANTrunkGvrpRegistration INTEGER,
hh3cifVLANTrunkPassListLow OCTET STRING,
hh3cifVLANTrunkPassListHigh OCTET STRING,
hh3cifVLANTrunkAllowListLow OCTET STRING,
hh3cifVLANTrunkAllowListHigh OCTET STRING
}
hh3cifVLANTrunkIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Index number of the VLANTrunk interface."
::= { hh3cifVLANTrunkStatusEntry 1 }
hh3cifVLANTrunkGvrpRegistration OBJECT-TYPE
SYNTAX INTEGER
{
normal (1),
fixed (2),
forbidden (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"GVRP registration information
normal: This is the default configuration. Allow create, register
and unregister vlans dynamiclly at this port.
fixed: Aallow create and register vlan manually at this port.
Prevent from unregistering vlans or registering known
vlans of this port at another trunk port.
forbidden: Unregister all vlans but vlan 1, forbid to create or
register any other vlans at this port."
::= { hh3cifVLANTrunkStatusEntry 2 }
hh3cifVLANTrunkPassListLow OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each actually
passed VLAN of the trunk port is represented by a single
bit within the value of this object. If that bit has a
value of '1' then that VLAN is actually passed in the set
of VLANs; the VLAN is not actually passed if its bit has
a value of '0'."
::= { hh3cifVLANTrunkStatusEntry 4 }
hh3cifVLANTrunkPassListHigh OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each actually
passed VLAN of the trunk port is represented by a single
bit within the value of this object. If that bit has a
value of '1' then that VLAN is actually passed in the set
of VLANs; the VLAN is not actually passed if its bit has
a value of '0'."
::= { hh3cifVLANTrunkStatusEntry 5 }
hh3cifVLANTrunkAllowListLow OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each allowed
VLAN of the trunk port is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is allowed in the set of VLANs;
the VLAN is not allowed if its bit has a value of '0'."
::= { hh3cifVLANTrunkStatusEntry 6 }
hh3cifVLANTrunkAllowListHigh OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each allowed
VLAN of the trunk port is represented by a single bit within
the value of this object. If that bit has a value of '1'
then that VLAN is allowed in the set of VLANs; the VLAN is
not allowed if its bit has a value of '0'."
::= { hh3cifVLANTrunkStatusEntry 7 }
hh3cethernetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cEthernetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Ethernet port attribute table."
::= { hh3cLswL2InfMibObject 4 }
hh3cethernetEntry OBJECT-TYPE
SYNTAX Hh3cEthernetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entries of Ethernet port attribute table"
INDEX { ifIndex }
::= { hh3cethernetTable 1}
Hh3cEthernetEntry ::=
SEQUENCE {
hh3cifEthernetDuplex INTEGER,
hh3cifEthernetMTU INTEGER,
hh3cifEthernetSpeed INTEGER,
hh3cifEthernetMdi INTEGER,
hh3cMaxMacLearn INTEGER,
hh3cifMacAddressLearn INTEGER,
hh3cifEthernetTest INTEGER,
hh3cifMacAddrLearnMode INTEGER,
hh3cifEthernetFlowInterval INTEGER,
hh3cifEthernetIsolate OCTET STRING,
hh3cifVlanVPNStatus INTEGER,
hh3cifVlanVPNUplinkStatus INTEGER,
hh3cifVlanVPNTPID Integer32,
hh3cifIsolateGroupID Integer32,
hh3cifisUplinkPort INTEGER,
hh3cifEthernetAutoSpeedMask SpeedModeFlag,
hh3cifEthernetAutoSpeed SpeedModeFlag
}
hh3cifEthernetDuplex OBJECT-TYPE
SYNTAX INTEGER
{
full (1),
half (2),
auto (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ethernet interface mode."
::= { hh3cethernetEntry 3 }
hh3cifEthernetMTU OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MTU on the Ethernet interface."
::= { hh3cethernetEntry 4 }
hh3cifEthernetSpeed OBJECT-TYPE
SYNTAX INTEGER
{
auto (0),
s10M (10),
s100M (100),
s1000M (1000),
s2500M (2500),
s5000M (5000),
s10000M (10000),
s24000M (24000),
s40000M (40000),
s20000M (20000),
s25000M (25000),
s50000M (50000),
s100000M (100000),
s200000M (200000),
s400000M (400000)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ethernet interface speed."
::= { hh3cethernetEntry 5 }
hh3cifEthernetMdi OBJECT-TYPE
SYNTAX INTEGER
{
mdi-ii (1),
mdi-x (2),
mdi-auto (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of the line connected to the port.
MDI-II (straight-through cable): 1
MDI-X (crossover cable): 2
MDI-AUTO (auto-sensing): 3"
::= { hh3cethernetEntry 7 }
hh3cMaxMacLearn OBJECT-TYPE
SYNTAX INTEGER(-1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of MAC addresses that the port can learn.
The value -1 means that the number of Mac addresses that the port
can learn is unlimited."
::= { hh3cethernetEntry 8 }
hh3cifMacAddressLearn OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the interface is allowed to learn mac address.
eanbled(1) means the interface can learn mac address, otherwise disabled(2)
can be set."
::= { hh3cethernetEntry 9 }
hh3cifEthernetTest OBJECT-TYPE
SYNTAX INTEGER
{
test(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Test this interface.
The actual testing will be different according to products.
Read operation not supported."
::= { hh3cethernetEntry 10 }
hh3cifMacAddrLearnMode OBJECT-TYPE
SYNTAX INTEGER
{
iVL(1),
sVL(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status indicates mac address learn mode of the interface.
IVL(1) means independent VLAN learning.
SVL means shared VLAN learning."
::= { hh3cethernetEntry 11 }
hh3cifEthernetFlowInterval OBJECT-TYPE
SYNTAX INTEGER (5..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set flow interval of the ethernet.
The NMS should set value to integer which is a multiple of 5."
::= { hh3cethernetEntry 12 }
hh3cifEthernetIsolate OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Isolate group means that all ports in the same isolate group can not
send and receive packets each other.
Each octet within this value specifies a set of eight isolate groups,
with the first octet specifying isolate groups 1 through 8, the second
octet specifying isolate groups 9 through 16, etc. Within each octet,
the leftmost bit is the first bit.
the first bit represents the lowest numbered isolate group, and the
last bit represents the highest numbered isolate group. one port can
belong to more than one isolate group.
Thus, each isolate group is represented by a single bit within the
value of this object.
If that bit has a value of '1', then that isolate group includes this port;
the port is not included if its bit has a value of '0'.
for example, the first octet is '10000100' means that the port is
included in the isolate group 1 and isolate group 6."
::= { hh3cethernetEntry 13 }
hh3cifVlanVPNStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Vlan VPN enable status."
::= { hh3cethernetEntry 14 }
hh3cifVlanVPNUplinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Vlan VPN uplink status."
::= { hh3cethernetEntry 15 }
hh3cifVlanVPNTPID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port based Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100.
Please refer to hh3cVlanVPNTPIDMode to get more information."
::= { hh3cethernetEntry 16 }
hh3cifIsolateGroupID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Isolate group identifier. Value zero means this interface does not
belong to any isolate group."
::= { hh3cethernetEntry 17 }
hh3cifisUplinkPort OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ethernet uplink status, default value is 2."
::= { hh3cethernetEntry 18 }
hh3cifEthernetAutoSpeedMask OBJECT-TYPE
SYNTAX SpeedModeFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies which kinds of speed mode can be negotiated.
Each bit corresponds to a kind of speed mode.
If the value of a bit is '1', it means the corresponding speed mode
is negotiable on the port. Otherwise the negotiation for that
kind of speed mode is not supported on this port. If there are
several negotiable speed modes, all bits for them are '1'.
For example, if the speed mode 's10M' and 's1000M' can be negotiable,
the value of this object is 0xA0."
::= { hh3cethernetEntry 19 }
hh3cifEthernetAutoSpeed OBJECT-TYPE
SYNTAX SpeedModeFlag
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which kinds of speed mode are negotiable
on this port.
Only when a bit of hh3cifEthernetAutoSpeedMask is '1', the corresponding
bit of this object can be set to '1', indicating the corresponding
speed mode is negotiable.
For example, if the value of hh3cifEthernetAutoSpeedMask is 0xA0,
which indicates speed mode 's10M' and 's1000M' are negotiable,
the possible value of this object should be one of the four values
(0x00, 0x20, 0x80 and 0xA0).
If the value of hh3cifEthernetSpeed is not 'auto', the value of this
object is insignificant and should be ignored. The value length of
this object should be as long as that of hh3cifEthernetAutoSpeedMask."
::= { hh3cethernetEntry 20 }
hh3cIsolateGroupMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max isolate group that this device support, the value is zero
means that the device does not support isolate group."
::= { hh3cLswL2InfMibObject 5 }
hh3cGlobalBroadcastMaxPps OBJECT-TYPE
SYNTAX INTEGER (0..14881000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global max packets per second. When it is set, the value of
BroadcastMaxPps in all ports will be changed to that setting."
::= { hh3cLswL2InfMibObject 6 }
hh3cGlobalBroadcastMaxRatio OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global max-ratio of broadcast from 0 to 100 percent.
When it is set, the value of BroadcastMaxRatio in all ports
will be changed to that setting."
::= { hh3cLswL2InfMibObject 7 }
hh3cBpduTunnelStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Bpdu tunnel enable status."
::= { hh3cLswL2InfMibObject 8 }
hh3cVlanVPNTPIDMode OBJECT-TYPE
SYNTAX INTEGER
{
port-based(1),
global(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan VPN TPID mode.
The value 'port-based' means VLAN VPN TPID value would be set based
on port via hh3cifVlanVPNTPID. In this situation, hh3cVlanVPNTPID is
meaningless and always return 0x8100.
The value 'global' means VLAN VPN TPID value should be set globally
via hh3cVlanVPNTPID. In this situation, hh3cifVlanVPNTPID in hh3cethernetTable
has the same value with hh3cVlanVPNTPID."
::= { hh3cLswL2InfMibObject 9 }
hh3cVlanVPNTPID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100."
::= { hh3cLswL2InfMibObject 10 }
hh3cPortIsolateGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cPortIsolateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Isolate Group attribute table."
::= { hh3cLswL2InfMibObject 11 }
hh3cPortIsolateGroupEntry OBJECT-TYPE
SYNTAX Hh3cPortIsolateGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hh3cPortIsolateGroupTable."
INDEX { hh3cPortIsolateGroupIndex }
::= { hh3cPortIsolateGroupTable 1 }
Hh3cPortIsolateGroupEntry ::=
SEQUENCE {
hh3cPortIsolateGroupIndex Integer32,
hh3cPortIsolateUplinkIfIndex InterfaceIndex,
hh3cPortIsolateGroupRowStatus RowStatus,
hh3cPortIsolateGroupDescription DisplayString
}
hh3cPortIsolateGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port isolate group identifier.
The index of the hh3cPortIsolateGroupTable.
The value ranges from 1 to the limit of isolate group quantity."
::= { hh3cPortIsolateGroupEntry 1 }
hh3cPortIsolateUplinkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Index number of the uplink interface."
::= { hh3cPortIsolateGroupEntry 2 }
hh3cPortIsolateGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Current operation status of the row."
::= { hh3cPortIsolateGroupEntry 3 }
hh3cPortIsolateGroupDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port isolate group description, default value is zero-length string."
::= { hh3cPortIsolateGroupEntry 4 }
hh3cMaxMacLearnRange OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of MAC address that the port supports."
::= { hh3cLswL2InfMibObject 12 }
hh3cifPortProtocolStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cifPortProtocolStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects of port statistics information based on
IPv4 and IPv6 protocols."
::= { hh3cLswL2InfMibObject 13 }
hh3cifPortProtocolStatEntry OBJECT-TYPE
SYNTAX Hh3cifPortProtocolStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of hh3cifPortProtocolStatTable."
INDEX { ifIndex }
::= { hh3cifPortProtocolStatTable 1 }
Hh3cifPortProtocolStatEntry ::=
SEQUENCE {
hh3cifIPv4InOctets Counter64,
hh3cifIPv4InUcastPkts Counter64,
hh3cifIPv4InMultiPkts Counter64,
hh3cifIPv4InBroadcastPkts Counter64,
hh3cifIPv4InDiscards Counter64,
hh3cifIPv4InErrors Counter64,
hh3cifIPv4OutOctets Counter64,
hh3cifIPv4OutUcastPkts Counter64,
hh3cifIPv4OutMultiPkts Counter64,
hh3cifIPv4OutBroadcastPkts Counter64,
hh3cifIPv4OutDiscards Counter64,
hh3cifIPv4OutErrors Counter64,
hh3cifIPv6InOctets Counter64,
hh3cifIPv6InUcastPkts Counter64,
hh3cifIPv6InMultiPkts Counter64,
hh3cifIPv6InAnycastPkts Counter64,
hh3cifIPv6InDiscards Counter64,
hh3cifIPv6InErrors Counter64,
hh3cifIPv6OutOctets Counter64,
hh3cifIPv6OutUcastPkts Counter64,
hh3cifIPv6OutMultiPkts Counter64,
hh3cifIPv6OutAnycastPkts Counter64,
hh3cifIPv6OutDiscards Counter64,
hh3cifIPv6OutErrors Counter64
}
hh3cifIPv4InOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets based on IPv4 received on the interface."
::= { hh3cifPortProtocolStatEntry 1 }
hh3cifIPv4InUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets based on IPv4 received on the interface."
::= { hh3cifPortProtocolStatEntry 2 }
hh3cifIPv4InMultiPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast packets based on IPv4 received on the interface."
::= { hh3cifPortProtocolStatEntry 3 }
hh3cifIPv4InBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast packets based on IPv4 received on the interface."
::= { hh3cifPortProtocolStatEntry 4 }
hh3cifIPv4InDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discard packets based on IPv4 received on the interface."
::= { hh3cifPortProtocolStatEntry 5 }
hh3cifIPv4InErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets based on IPv4 received on the interface."
::= { hh3cifPortProtocolStatEntry 6 }
hh3cifIPv4OutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets based on IPv4 transmitted out of the interface."
::= { hh3cifPortProtocolStatEntry 7 }
hh3cifIPv4OutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets based on IPv4 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 8 }
hh3cifIPv4OutMultiPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast packets based on IPv4 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 9 }
hh3cifIPv4OutBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast packets based on IPv4 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 10 }
hh3cifIPv4OutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discard packets based on IPv4 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 11 }
hh3cifIPv4OutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets based on IPv4 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 12 }
hh3cifIPv6InOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets based on IPv6 received on the interface."
::= { hh3cifPortProtocolStatEntry 13 }
hh3cifIPv6InUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets based on IPv6 received on the interface."
::= { hh3cifPortProtocolStatEntry 14 }
hh3cifIPv6InMultiPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast packets based on IPv6 received on the interface."
::= { hh3cifPortProtocolStatEntry 15 }
hh3cifIPv6InAnycastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of anycast packets based on IPv6 received on the interface."
::= { hh3cifPortProtocolStatEntry 16 }
hh3cifIPv6InDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discard packets based on IPv6 received on the interface."
::= { hh3cifPortProtocolStatEntry 17 }
hh3cifIPv6InErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets based on IPv6 received on the interface."
::= { hh3cifPortProtocolStatEntry 18 }
hh3cifIPv6OutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets based on IPv6 transmitted of the interface."
::= { hh3cifPortProtocolStatEntry 19 }
hh3cifIPv6OutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets based on IPv6 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 20 }
hh3cifIPv6OutMultiPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast packets based on IPv6 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 21 }
hh3cifIPv6OutAnycastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of anycast packets based on IPv6 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 22 }
hh3cifIPv6OutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discard packets based on IPv6 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 23 }
hh3cifIPv6OutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets based on IPv6 transmitted out of the
interface."
::= { hh3cifPortProtocolStatEntry 24 }
END
Reference in New Issue Copy Permalink