mibs/MIBS/comware/HH3C-STORM-CONSTRAIN-MIB

-- ==================================================================
-- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd.  All rights reserved.
--
-- Description: Storm-Constrain MIB
-- Reference:
-- Version: V1.2
-- History:
-- V1.0 2005-11-19 Created by XueCong
-- V1.1 2008-06-06 Modified the description of Hh3cStormConstrainUnit
--                 Added hh3cStormCtrlPortMode by jinyi
-- V1.2 2015-06-17 Modified the description of Hh3cStormConstrainUnit
--                 Added knownUnicast to hh3cStormTrapType by yangyiquan
-- ==================================================================
HH3C-STORM-CONSTRAIN-MIB DEFINITIONS ::= BEGIN

IMPORTS

    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
    NOTIFICATION-TYPE
        FROM SNMPv2-SMI

    RowStatus, TEXTUAL-CONVENTION
        FROM SNMPv2-TC

    ifIndex
        FROM IF-MIB

    hh3cCommon
        FROM HH3C-OID-MIB;

hh3cStormConstrain MODULE-IDENTITY
    LAST-UPDATED "201506170000Z"
    ORGANIZATION
        "New H3C Tech. Co., Ltd."
    CONTACT-INFO
        "Platform Team New H3C Tech. Co., Ltd.
         Hai-Dian District Beijing P.R. China
         http://www.h3c.com
         Zip:100085"
    DESCRIPTION
        "The Storm-Constrain function is used to avoid the
         packet-storm on a port.  Three types of flux can be
         set observed respectively: broadcast, multicast and
         unicast.  If an observed flux exceeds its upper limit,
         this kind of flux will be recognized as over-upper-flux.
         This kind of flux will be considered as normal-flux
         until it falls below its lower limit.  If any type of
         observed flux is over-upper-flux, the port will change
         its status to controlled-status, that is to stop packet
         forwarding to avoid storm.  Only when all the observed
         fluxes are not over-upper-flux, will the port return to
         normal(forwarding) status."
    REVISION        "201506170000Z"
    DESCRIPTION
        "To add knownUnicast to hh3cStormTrapType."
    ::= { hh3cCommon  66 }

Hh3cStormConstrainUnit ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The unit of the flux.
         none: not define.
         packetsPerSecond: packets per second.
         ratio: unit is 1%.  For example, if the value is 40, it means 40%.
         bytesPerSecond: bytes per second.
         kbitsPerSecond: kilobits per second."
    SYNTAX INTEGER
        {
        none(1),
        packetsPerSecond(2),
        ratio(3),
        bytesPerSecond(4),
        kbitsPerSecond(5)
        }

-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================

hh3cStormScalarGroup OBJECT IDENTIFIER ::= {  hh3cStormConstrain 1  }

hh3cStormTrapType OBJECT-TYPE
    SYNTAX INTEGER
        {
        broadcast(1),
        multicast(2),
        unicast(3),
        knownUnicast(4)
        }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This value is used to identify the type of trap.
         broadcast: Trap message generated when broadcast traffic exceeds
                    the upper limit or falls below the lower limit on a port.
         multicast: Trap message generated when multicast traffic exceeds
                    the upper limit or falls below the lower limit on a port.
         unicast  : Trap message generated when unknown unicast traffic exceeds
                    the upper limit or falls below the lower limit on a port.
         knownUnicast: Trap message generated when known unicast traffic exceeds
                    the upper limit or falls below the lower limit on a port."
    ::= { hh3cStormScalarGroup 1 }

hh3cStormTrapThreshold OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This value is used to figure the threshold of flux in
         trap message.
         For example, when the trap is generated for broadcast
         flux exceeds upper limit on a port, this value is
         equal to upper limit value configured.  And when the
         trap is generated for broadcast flux fell under lower
         limit, this value is equal to lower limit value configured."
    ::= { hh3cStormScalarGroup 2 }

hh3cStormTableGroup OBJECT IDENTIFIER ::= {  hh3cStormConstrain 2  }

hh3cStormCtrlTable  OBJECT-TYPE
    SYNTAX          SEQUENCE OF Hh3cStormCtrlEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table containing configurations of storm-constrain."
    ::= { hh3cStormTableGroup  1 }

hh3cStormCtrlEntry  OBJECT-TYPE
    SYNTAX          Hh3cStormCtrlEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Detailed information of storm-constrain configurations."
    INDEX { ifIndex }
    ::= { hh3cStormCtrlTable 1 }

Hh3cStormCtrlEntry  ::=
    SEQUENCE {
        hh3cStormCtrlPortStatus                      INTEGER,
        hh3cStormCtrlBroadcastUnit                   Hh3cStormConstrainUnit,
        hh3cStormCtrlBroadcastUpper                  Integer32,
        hh3cStormCtrlBroadcastLower                  Integer32,
        hh3cStormCtrlMulticastUnit                   Hh3cStormConstrainUnit,
        hh3cStormCtrlMulticastUpper                  Integer32,
        hh3cStormCtrlMulticastLower                  Integer32,
        hh3cStormCtrlUnicastUnit                     Hh3cStormConstrainUnit,
        hh3cStormCtrlUnicastUpper                    Integer32,
        hh3cStormCtrlUnicastLower                    Integer32,
        hh3cStormCtrlRowStatus                       RowStatus,
        hh3cStormCtrlPortMode                        INTEGER
             }

hh3cStormCtrlPortStatus OBJECT-TYPE
    SYNTAX          INTEGER{ controlled(1), normal(2)}
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Status of the port:
         controlled: indicate that the port is in controlled status.
                     Port which is in this status will not forward some type
                     of packet.
         normal    : indicate that the port is in normal status."
    ::= { hh3cStormCtrlEntry 1 }

hh3cStormCtrlBroadcastUnit OBJECT-TYPE
    SYNTAX          Hh3cStormConstrainUnit
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The unit of the broadcast flux.
         This value must be set together with hh3cStormCtrlBroadcastUpper
         and hh3cStormCtrlBroadcastLower."
    ::= { hh3cStormCtrlEntry 2 }

hh3cStormCtrlBroadcastUpper  OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The upper-limit of incoming broadcast taffic at a port
         within 1 second interval.
         Its unit depends on hh3cStormCtrlBroadcastUnit value."
    ::= { hh3cStormCtrlEntry 3 }

hh3cStormCtrlBroadcastLower  OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The lower-limit of incoming broadcast taffic at a port
         within 1 second interval.
         This value must be lower than hh3cStormCtrlBroadcastUpper value.
         Its unit depends on hh3cStormCtrlBroadcastUnit value."
    ::= { hh3cStormCtrlEntry 4 }

hh3cStormCtrlMulticastUnit  OBJECT-TYPE
    SYNTAX          Hh3cStormConstrainUnit
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The unit of the multicast flux.
         This value must be set together with hh3cStormCtrlMulticastUpper
         and hh3cStormCtrlMulticastLower."
    ::= { hh3cStormCtrlEntry 5 }

hh3cStormCtrlMulticastUpper  OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The upper-limit of incoming multicast taffic at a port
         within 1 second interval.
         Its unit depends on hh3cStormCtrlMulticastUnit value."
    ::= { hh3cStormCtrlEntry 6 }

hh3cStormCtrlMulticastLower  OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The lower-limit of incoming multicast taffic at a port
         within 1 second interval.
         This value must be lower than hh3cStormCtrlMulticastUpper value.
         Its unit depends on hh3cStormCtrlMulticastUnit value."
    ::= { hh3cStormCtrlEntry 7 }

hh3cStormCtrlUnicastUnit  OBJECT-TYPE
    SYNTAX          Hh3cStormConstrainUnit
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The unit of the unicast flux.
         This value must be set together with hh3cStormCtrlUnicastUpper
         and hh3cStormCtrlUnicastLower."
    ::= { hh3cStormCtrlEntry 8 }

hh3cStormCtrlUnicastUpper  OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The upper-limit of incoming unicast taffic at a port
         within 1 second interval.
         Its unit depends on hh3cStormCtrlUnicastUnit value."
    ::= { hh3cStormCtrlEntry 9 }

hh3cStormCtrlUnicastLower  OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The lower-limit of incoming unicast taffic at a port
         within 1 second interval.
         This value must be lower than hh3cStormCtrlUnicastUpper value.
         Its unit depends on hh3cStormCtrlUnicastUnit value."
    ::= { hh3cStormCtrlEntry 10 }

hh3cStormCtrlRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object is responsible for managing the creation,
         deletion and modification of rows, which supports active
         status and CreatAndGo, destroy operation."
    ::= { hh3cStormCtrlEntry 11 }

hh3cStormCtrlPortMode OBJECT-TYPE
    SYNTAX          INTEGER{ none(1), block(2), shutdown(3) }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The storm control mode of the port."
    ::= { hh3cStormCtrlEntry 12 }

hh3cStormNotifications OBJECT IDENTIFIER ::= {  hh3cStormConstrain 3  }

hh3cStormRising NOTIFICATION-TYPE
    OBJECTS  { ifIndex, hh3cStormTrapType, hh3cStormTrapThreshold, hh3cStormCtrlPortStatus }
    STATUS          current
    DESCRIPTION
        "This trap message is generated when any type of the
         flux exceeds its upper limit on a port."
    ::= { hh3cStormNotifications 1 }

hh3cStormFalling NOTIFICATION-TYPE
    OBJECTS  { ifIndex, hh3cStormTrapType, hh3cStormTrapThreshold, hh3cStormCtrlPortStatus }
    STATUS          current
    DESCRIPTION
        "This trap message is generated when a flux which used
         to overflow its upper limit, falls below its lower
         limit on a port."
    ::= { hh3cStormNotifications 2 }

END