mibs/MIBS/comware/HH3C-WLAN-FLEXAPP-CFG-MIB

-- =============================================================================
-- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:
--   The file defines a MIB that provides WLAN application configuration information.
-- Reference:
-- Version: V1.0
-- History:
--   V1.0 2015-05-26 Initial version, created by lifei (Richard)
-- =============================================================================
HH3C-WLAN-FLEXAPP-CFG-MIB DEFINITIONS ::= BEGIN

IMPORTS
        TruthValue,
        MacAddress
    FROM SNMPv2-TC
        MODULE-IDENTITY,
        NOTIFICATION-TYPE,
        OBJECT-TYPE,
        Integer32,
        IpAddress
    FROM SNMPv2-SMI
        hh3cDot11
    FROM HH3C-DOT11-REF-MIB;

hh3cWlanFlexAppCFG MODULE-IDENTITY
    LAST-UPDATED "201505261800Z"        -- May 26, 2015 at 18:00 GMT
    ORGANIZATION
        "New H3C Technologies Co., Ltd."
    CONTACT-INFO
        "Platform Team New H3C Technologies Co., Ltd.
         Hai-Dian District Beijing P.R. China
         http://www.h3c.com
         Zip: 100085"
    DESCRIPTION
        "This MIB provides information about WLAN application configuration."
    REVISION "201505261800Z"        -- May 26, 2015 at 18:00 GMT
    DESCRIPTION
        "Added new nodes."
    ::= { hh3cDot11 19 }
--
-- Node definitions
--

hh3cWlanModuleConfigGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 1 }
--  Module Group has the following children:
--  hh3cWlanModuleConfigTable          ::= { hh3cWlanModuleConfigGroup 1 }
--  hh3cWlanModuleInfoTable            ::= { hh3cWlanModuleConfigGroup 2 }

hh3cWlanIOTConfigGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 2 }
--  IOT Configure Group has the following children:
--  hh3cWlanIOTConfigTable             ::= { hh3cWlanIOTConfigGroup 1 }

hh3cWlanModuleNotifyGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 3 }
--  Module Notify Group has the following children:
--  hh3cWlanModuleTraps ::= { hh3cWlanModuleNotifyGroup 0 }
--  hh3cWlanModuleTrapVarObjects ::= { hh3cWlanModuleNotifyGroup 1 }

hh3cWlanBLEConfigGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 4 }
--  BLE Configure Group has the following children:
--  hh3cWlanBLEConfigTable             ::= { hh3cWlanBLEConfigGroup 1 }
--  hh3cWlanBLEModuleConfigTable       ::= { hh3cWlanBLEConfigGroup 2 }

hh3cWlanAEConfigGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 5 }
--  AE Configure Group has the following children:
--  hh3cWlanAEConfigTable               ::= { hh3cWlanAEConfigGroup 1 }
--  hh3cWlanAERadioConfigTable          ::= { hh3cWlanAEConfigGroup 2 }

hh3cWlanCommonConfigGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 6 }
--  common Configure Group has the following children:
--  hh3cWlanCommonConfigTable             ::= { hh3cWlanCommonConfigGroup 1 }

hh3cWlanCUPIDConfigGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 7 }
--  CUPID Configure Group has the following children:
--  hh3cWlanCUPIDConfigTable             ::= { hh3cWlanCUPIDConfigGroup 1 }

hh3cWlanFPConfigGroup OBJECT IDENTIFIER ::= { hh3cWlanFlexAppCFG 8 }
--  fingerprint Configure Group has the following children:
--  hh3cWlanFPConfigTable             ::= { hh3cWlanFPConfigGroup 1 }

-- *****************************************************************************
-- *  hh3cWlanModuleConfigTable Definition
-- *****************************************************************************
hh3cWlanModuleConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanModuleConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure module parameters for a module to operate."
    ::= { hh3cWlanModuleConfigGroup 1 }

hh3cWlanModuleConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanModuleConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains module configuration information."
    INDEX
        {
            hh3cWlanAPSerialID,
            hh3cWlanModuleID
        }
    ::= { hh3cWlanModuleConfigTable 1 }

Hh3cWlanModuleConfigEntry ::= SEQUENCE
    {
        hh3cWlanAPSerialID               OCTET STRING,
        hh3cWlanModuleID                 Integer32,
        hh3cWlanModuleType               INTEGER,
        hh3cWlanModuleStatus             TruthValue,
        hh3cWlanModuleReset              INTEGER,
        hh3cWlanModuleRstFac             INTEGER,
        hh3cWlanModuleUpWareStatus       TruthValue,
        hh3cWlanModuleTxPower            Integer32,
        hh3cWlanModuleManualUpdate          OCTET STRING
    }

hh3cWlanAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanModuleConfigEntry 1 }

hh3cWlanModuleID OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the module ID of a module."
    ::= { hh3cWlanModuleConfigEntry 2 }

hh3cWlanModuleType OBJECT-TYPE
    SYNTAX      INTEGER
        {
          none(0),
          ble(1),
          iot(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the type of a module."
    ::= { hh3cWlanModuleConfigEntry 3 }

hh3cWlanModuleStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of a module."
    ::= { hh3cWlanModuleConfigEntry 4 }

hh3cWlanModuleReset OBJECT-TYPE
    SYNTAX      INTEGER
    {
      none(0),
      reboot(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When read the value from the node
         none: Represents the module has been rebooted and the status of the module is normal.
         When write the value to the node
         reboot: Represents module rebooting.  Other values are not supported."
    ::= { hh3cWlanModuleConfigEntry 5 }

hh3cWlanModuleRstFac OBJECT-TYPE
    SYNTAX      INTEGER
    {
      none(0),
      restore(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When read the value from the node
         none: Represents the module has been restored and the status of the module is normal.
         When write the value to the node
         restore: Represents module restoring.  Other values are not supported."
    ::= { hh3cWlanModuleConfigEntry 6 }

hh3cWlanModuleUpWareStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of module auto update."
    ::= { hh3cWlanModuleConfigEntry 7 }

hh3cWlanModuleTxPower OBJECT-TYPE
    SYNTAX      Integer32(1..4)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the packet transmit power."
    ::= { hh3cWlanModuleConfigEntry 8 }

hh3cWlanModuleManualUpdate OBJECT-TYPE
    SYNTAX       OCTET STRING
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object represents the file path for module firmware updating."
    ::= { hh3cWlanModuleConfigEntry 9 }

-- *****************************************************************************
-- * End of hh3cWlanModuleConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanModuleInfoTable Definition
-- *****************************************************************************
hh3cWlanModuleInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanModuleInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table contains information about each module of an AP."
    ::= { hh3cWlanModuleConfigGroup 2 }

hh3cWlanModuleInfoEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanModuleInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains IOT module information."
    INDEX
        {
            hh3cDot11IOTAPSerialID,
            hh3cDot11IOTModuleID
        }
    ::= { hh3cWlanModuleInfoTable 1 }

Hh3cWlanModuleInfoEntry ::= SEQUENCE
    {
        hh3cDot11IOTAPSerialID          OCTET STRING,
        hh3cDot11IOTModuleID            Integer32,
        hh3cDot11IOTModuleType          INTEGER,
        hh3cDot11IOTModuleModel         OCTET STRING,
        hh3cDot11IOTModuleHwVersion     OCTET STRING,
        hh3cDot11IOTModuleSwVersion     OCTET STRING,
        hh3cDot11IOTModuleSerialId      OCTET STRING
    }

hh3cDot11IOTAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanModuleInfoEntry 1 }

hh3cDot11IOTModuleID OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents a module."
    ::= { hh3cWlanModuleInfoEntry 2 }

hh3cDot11IOTModuleType OBJECT-TYPE
    SYNTAX      INTEGER
        {
          none(0),
          h3c(1),
          iot(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the type of a module."
    ::= { hh3cWlanModuleInfoEntry 3 }

hh3cDot11IOTModuleModel OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the model of a module."
    ::= { hh3cWlanModuleInfoEntry 4 }

hh3cDot11IOTModuleHwVersion OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the hardware version of a module."
    ::= { hh3cWlanModuleInfoEntry 5 }

hh3cDot11IOTModuleSwVersion OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the software version of a module."
    ::= { hh3cWlanModuleInfoEntry 6 }

hh3cDot11IOTModuleSerialId OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents the sequence ID of a module."
    ::= { hh3cWlanModuleInfoEntry 7 }

-- *****************************************************************************
-- * End of hh3cDot11APModuleInfoTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanIOTConfigTable Definition
-- *****************************************************************************
hh3cWlanIOTConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanIOTConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure IOT parameters."
    ::= { hh3cWlanIOTConfigGroup 1 }

hh3cWlanIOTConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanIOTConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains module configuration information."
    INDEX
        {
            hh3cWlanIOTAPSerialID
        }
    ::= { hh3cWlanIOTConfigTable 1 }

Hh3cWlanIOTConfigEntry ::= SEQUENCE
    {
        hh3cWlanIOTAPSerialID            OCTET STRING,
        hh3cWlanIOTEngineAdd             IpAddress,
        hh3cWlanIOTEnginePort            Integer32
    }

hh3cWlanIOTAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanIOTConfigEntry 1 }

hh3cWlanIOTEngineAdd OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the IPv4 address of the location server."
    ::= { hh3cWlanIOTConfigEntry 2 }

hh3cWlanIOTEnginePort OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port to listen for IOT messages from the server."
    ::= { hh3cWlanIOTConfigEntry 3 }

-- *****************************************************************************
-- * End of hh3cWlanIOTConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanModuleTraps Definition
-- *****************************************************************************
-- AP Management Notification

hh3cWlanModuleTraps OBJECT IDENTIFIER
    ::= { hh3cWlanModuleNotifyGroup 0 }

hh3cWlanModuleInsertTrap NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cWlanTrapAPMacAddress,
            hh3cWlanTrapModuleID,
            hh3cWlanTrapModulePhyType,
            hh3cWlanTrapModuleModel,
            hh3cWlanTrapModuleHwVersion,
            hh3cWlanTrapModuleSwVersion,
            hh3cWlanTrapModuleSequenceId
        }
    STATUS current
    DESCRIPTION
        "This notification will be generated when an IOT module is inserted."
    ::= { hh3cWlanModuleTraps 1 }

hh3cWlanModuleRomveTrap NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cWlanTrapAPMacAddress,
            hh3cWlanTrapModuleID,
            hh3cWlanTrapModulePhyType,
            hh3cWlanTrapModuleModel,
            hh3cWlanTrapModuleHwVersion,
            hh3cWlanTrapModuleSwVersion,
            hh3cWlanTrapModuleSequenceId
        }
    STATUS current
    DESCRIPTION
        "This notification will be generated when an IOT module is removed."
    ::= { hh3cWlanModuleTraps 2 }

hh3cWlanModuleMissMatch NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cWlanTrapAPMacAddress,
            hh3cWlanTrapModuleID,
            hh3cWlanTrapModuleCfgType,
            hh3cWlanTrapModulePhyType,
            hh3cWlanTrapModuleModel
        }
    STATUS current
    DESCRIPTION
        "This notification will be generated when the configured
         type doesn't match the module type."
    ::= { hh3cWlanModuleTraps 3 }

-- AP Management Notification variable object

hh3cWlanModuleTrapVarObjects OBJECT IDENTIFIER
    ::= { hh3cWlanModuleNotifyGroup 1 }

hh3cWlanTrapAPMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the MAC address of an AP."
    ::= {hh3cWlanModuleTrapVarObjects 1 }

hh3cWlanTrapModuleID OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the ID of a module."
    ::= { hh3cWlanModuleTrapVarObjects 2 }

hh3cWlanTrapModuleCfgType OBJECT-TYPE
    SYNTAX      INTEGER
        {
          none(0),
          h3c(1),
          iot(2)
        }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the configuration type of a module."
    ::= { hh3cWlanModuleTrapVarObjects 3 }

hh3cWlanTrapModulePhyType OBJECT-TYPE
    SYNTAX      INTEGER
        {
          none(0),
          h3c(1),
          iot(2)
        }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the physical type of a module."
    ::= { hh3cWlanModuleTrapVarObjects 4 }

hh3cWlanTrapModuleModel OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the model of a module."
    ::= { hh3cWlanModuleTrapVarObjects 5 }

hh3cWlanTrapModuleHwVersion OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the hardware version of a module."
    ::= { hh3cWlanModuleTrapVarObjects 6 }

hh3cWlanTrapModuleSwVersion OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the software version of a module."
    ::= { hh3cWlanModuleTrapVarObjects 7 }

hh3cWlanTrapModuleSequenceId OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object represents the sequence ID of a module."
    ::= { hh3cWlanModuleTrapVarObjects 8 }

-- *****************************************************************************
-- * End of hh3cWlanModuleTraps Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanBLEConfigTable Definition
-- *****************************************************************************
hh3cWlanBLEConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanBLEConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure Bluetooth Low Energy (BLE) parameters."
    ::= { hh3cWlanBLEConfigGroup 1 }

hh3cWlanBLEConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanBLEConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains BLE location configuration information."
    INDEX
        {
            hh3cWlanBLEAPSerialID
        }
    ::= { hh3cWlanBLEConfigTable 1 }

Hh3cWlanBLEConfigEntry ::= SEQUENCE
    {
        hh3cWlanBLEAPSerialID            OCTET STRING,
        hh3cWlanBLEStatus                TruthValue,
        hh3cWlanBLEEngineAdd             IpAddress,
        hh3cWlanBLEEnginePort            Integer32,
        hh3cWlanBLEVendorPort            Integer32,
        hh3cWlanBLERssiStatus            TruthValue,
        hh3cWlanBLERssiThreshold         Integer32,
        hh3cWlanBLEConnectPassword       OCTET STRING,
        hh3cWlanBLECommandPassword       OCTET STRING,
        hh3cWlanBLEReportStatus          TruthValue,
        hh3cWlanBLEReportInterval        Integer32,
        hh3cWlanBLEAgingTime             Integer32,
        hh3cWlanBLERealTimeReportStatus  TruthValue,
        hh3cWlanBLERealTimePrefix        OCTET STRING
    }

hh3cWlanBLEAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanBLEConfigEntry 1 }

hh3cWlanBLEStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of BLE location."
    ::= { hh3cWlanBLEConfigEntry 2 }

hh3cWlanBLEEngineAdd OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the server's IPv4 address to which BLE messages are sent."
    ::= { hh3cWlanBLEConfigEntry 3 }

hh3cWlanBLEEnginePort OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port of the location server."
    ::= { hh3cWlanBLEConfigEntry 4 }

hh3cWlanBLEVendorPort OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port to listen for BLE messages from the server."
    ::= { hh3cWlanBLEConfigEntry 5 }

hh3cWlanBLERssiStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of BLE RSSI-based packet filtering."
    ::= { hh3cWlanBLEConfigEntry 6 }

hh3cWlanBLERssiThreshold OBJECT-TYPE
    SYNTAX      Integer32(5..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the max RSSI value of clients' packets."
    ::= { hh3cWlanBLEConfigEntry 7 }

hh3cWlanBLEConnectPassword OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0|4))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the BLE module connection password."
    ::= { hh3cWlanBLEConfigEntry 8 }

hh3cWlanBLECommandPassword OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0|12))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the BLE module command password."
    ::= { hh3cWlanBLEConfigEntry 9 }

hh3cWlanBLEReportStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of BLE location reporting."
    ::= { hh3cWlanBLEConfigEntry 10 }

hh3cWlanBLEReportInterval OBJECT-TYPE
    SYNTAX      Integer32(1..86400)
    UNITS       "Second"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the interval at which an AP sends BLE messages to the server."
    ::= { hh3cWlanBLEConfigEntry 11 }

hh3cWlanBLEAgingTime OBJECT-TYPE
    SYNTAX      Integer32(60..3600)
    UNITS       "Second"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the aging time for iBeacon devices."
    ::= { hh3cWlanBLEConfigEntry 12 }

hh3cWlanBLERealTimeReportStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of BLE realtime reporting."
    ::= { hh3cWlanBLEConfigEntry 13 }

hh3cWlanBLERealTimePrefix OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0|8..18))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the manufacturer prefix of BLE devices to
         be located.  The prefix must be an even number."
    ::= { hh3cWlanBLEConfigEntry 14 }

-- *****************************************************************************
-- * End of hh3cWlanBLEConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanBLEModuleConfigTable Definition
-- *****************************************************************************
hh3cWlanBLEModuleConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanBLEModuleConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure BLE module parameters."
    ::= { hh3cWlanBLEConfigGroup 2 }

hh3cWlanBLEModuleConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanBLEModuleConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains BLE module configuration information."
    INDEX
        {
            hh3cWlanBLEModuleAPSerialID,
            hh3cWlanBLEModuleID
        }
    ::= { hh3cWlanBLEModuleConfigTable 1 }

Hh3cWlanBLEModuleConfigEntry ::= SEQUENCE
    {
        hh3cWlanBLEModuleAPSerialID   OCTET STRING,
        hh3cWlanBLEModuleID           Integer32,
        hh3cWlanBLEAdvReportStatus    TruthValue,
        hh3cWlanBLEAdvReportInterval  Integer32,
        hh3cWlanBLEAdvUUID            OCTET STRING,
        hh3cWlanBLEAdvMajorID         Integer32,
        hh3cWlanBLEAdvMinorID         Integer32
    }

hh3cWlanBLEModuleAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanBLEModuleConfigEntry 1 }

hh3cWlanBLEModuleID OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the ID of a module."
    ::= { hh3cWlanBLEModuleConfigEntry 2 }

hh3cWlanBLEAdvReportStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of BLE advertisement reporting."
    ::= { hh3cWlanBLEModuleConfigEntry 3 }

hh3cWlanBLEAdvReportInterval OBJECT-TYPE
    SYNTAX      Integer32(50..1000)
    UNITS       "Second"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the interval at which a BLE module sends advertisement packets."
    ::= { hh3cWlanBLEModuleConfigEntry 4 }

hh3cWlanBLEAdvUUID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0|32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UUID of BLE advertisement packets."
    ::= { hh3cWlanBLEModuleConfigEntry 5 }

hh3cWlanBLEAdvMajorID OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the major ID of BLE advertisement packets."
    ::= { hh3cWlanBLEModuleConfigEntry 6 }

hh3cWlanBLEAdvMinorID OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the minor ID of BLE advertisement packets."
    ::= { hh3cWlanBLEModuleConfigEntry 7 }

-- *****************************************************************************
-- * End of hh3cWlanBLEModuleConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanAEConfigTable Definition
-- *****************************************************************************
hh3cWlanAEConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanAEConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure AeroScout (AE) parameters."
    ::= { hh3cWlanAEConfigGroup 1 }

hh3cWlanAEConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanAEConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains AE location configuration information."
    INDEX
        {
            hh3cWlanAEAPSerialID
        }
    ::= { hh3cWlanAEConfigTable 1 }

Hh3cWlanAEConfigEntry ::= SEQUENCE
    {
        hh3cWlanAEAPSerialID          OCTET STRING,
        hh3cWlanAEStatus              TruthValue,
        hh3cWlanAEEngineAddr          IpAddress,
        hh3cWlanAEEnginePort          Integer32,
        hh3cWlanAEVendorPort          Integer32,
        hh3cWlanAETimeStamp           INTEGER,
        hh3cWlanAEVersion             INTEGER,
        hh3cWlanAETagMultiAddr        MacAddress,
        hh3cWlanAEEngineDetection     INTEGER,
        hh3cWlanAEReportMode          INTEGER
    }

hh3cWlanAEAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanAEConfigEntry 1 }

hh3cWlanAEStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of AE location."
    ::= { hh3cWlanAEConfigEntry 2 }

hh3cWlanAEEngineAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the server's IPv4 address to which AE messages are sent."
    ::= { hh3cWlanAEConfigEntry 3 }

hh3cWlanAEEnginePort OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port of the location server."
    ::= { hh3cWlanAEConfigEntry 4 }

hh3cWlanAEVendorPort OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port to listen for AE messages from the server."
    ::= { hh3cWlanAEConfigEntry 5 }

hh3cWlanAETimeStamp OBJECT-TYPE
    SYNTAX      INTEGER
        {
          absolute(1),
          relative(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of timestamp."
    ::= { hh3cWlanAEConfigEntry 6 }

hh3cWlanAEVersion OBJECT-TYPE
    SYNTAX      INTEGER
        {
          v2(2),
          v3(3)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the version of the AE protocol."
    ::= { hh3cWlanAEConfigEntry 7 }

hh3cWlanAETagMultiAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents Tag's multicast MAC address."
    ::= { hh3cWlanAEConfigEntry 8 }
hh3cWlanAEEngineDetection OBJECT-TYPE
    SYNTAX      INTEGER
        {
          static(1),
          dynamic(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the location mode."
    ::= { hh3cWlanAEConfigEntry 9 }
hh3cWlanAEReportMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
          local(1),
          central(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the report mode."
    ::= { hh3cWlanAEConfigEntry 10 }

-- *****************************************************************************
-- * End of hh3cWlanAEConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanAERadioConfigTable Definition
-- *****************************************************************************
hh3cWlanAERadioConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanAERadioConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure AE parameters."
    ::= { hh3cWlanAEConfigGroup 2 }

hh3cWlanAERadioConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanAERadioConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains AE location configuration information."
    INDEX
        {
            hh3cWlanAERadioAPSerialID,
            hh3cWlanAEAPRadioID
        }
    ::= { hh3cWlanAERadioConfigTable 1 }

Hh3cWlanAERadioConfigEntry ::= SEQUENCE
    {
        hh3cWlanAERadioAPSerialID     OCTET STRING,
        hh3cWlanAEAPRadioID           Integer32,
        hh3cWlanAERadioStatus         TruthValue,
        hh3cWlanAEMUStatus            TruthValue,
        hh3cWlanAETagStatus           TruthValue
    }

hh3cWlanAERadioAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanAERadioConfigEntry 1 }

hh3cWlanAEAPRadioID OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the ID of a radio."
    ::= { hh3cWlanAERadioConfigEntry 2 }

hh3cWlanAERadioStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of radio-based location."
    ::= { hh3cWlanAERadioConfigEntry 3 }

hh3cWlanAEMUStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of MU message reporting."
    ::= { hh3cWlanAERadioConfigEntry 4 }

hh3cWlanAETagStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of Tag message reporting."
    ::= { hh3cWlanAERadioConfigEntry 5 }

-- *****************************************************************************
-- * End of hh3cWlanAERadioConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanCommonConfigTable Definition
-- *****************************************************************************
hh3cWlanCommonConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanCommonConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure common parameters."
    ::= { hh3cWlanCommonConfigGroup 1 }

hh3cWlanCommonConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanCommonConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains common configuration information."
    INDEX
        {
            hh3cWlanCommonAPSerialID
        }
    ::= { hh3cWlanCommonConfigTable 1 }

Hh3cWlanCommonConfigEntry ::= SEQUENCE
    {
        hh3cWlanCommonAPSerialID                 OCTET STRING,
        hh3cWlanDilutionStatus                   TruthValue,
        hh3cWlanDilutionFactor                   Integer32,
        hh3cWlanDilutionTimeout                  Integer32,
        hh3cWlanIgnoreBeacon                     TruthValue,
        hh3cWlanRateLimitStatus                  TruthValue,
        hh3cWlanRateLimitCir                     Integer32,
        hh3cWlanRateLimitCbs                     Integer32,
        hh3cWlanClientRateLimitStatus            TruthValue,
        hh3cWlanClientRateLimitCir               Integer32,
        hh3cWlanClientRateLimitCbs               Integer32,
        hh3cWlanRssiStatus                       TruthValue,
        hh3cWlanRssiThreshold                    Integer32,
        hh3cWlanIgnoreApFrame                    TruthValue
    }

hh3cWlanCommonAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanCommonConfigEntry 1 }

hh3cWlanDilutionStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of packet dilution."
    ::= { hh3cWlanCommonConfigEntry 2 }

hh3cWlanDilutionFactor OBJECT-TYPE
    SYNTAX      Integer32(0..10000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the packet dilution factor."
    ::= { hh3cWlanCommonConfigEntry 3 }

hh3cWlanDilutionTimeout OBJECT-TYPE
    SYNTAX      Integer32(0..60)
    UNITS       "Second"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the packet dilution timeout."
    ::= { hh3cWlanCommonConfigEntry 4 }

hh3cWlanIgnoreBeacon OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of beacon ignoring."
    ::= { hh3cWlanCommonConfigEntry 5 }

hh3cWlanRateLimitStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of location packet rate limiting."
    ::= { hh3cWlanCommonConfigEntry 6 }

hh3cWlanRateLimitCir OBJECT-TYPE
    SYNTAX      Integer32(0|8..1300000)
    UNITS       "Kbps"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the CIR for sending location packets."
    ::= { hh3cWlanCommonConfigEntry 7 }

hh3cWlanRateLimitCbs OBJECT-TYPE
    SYNTAX      Integer32(0|500..130000000)
    UNITS       "Bytes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the CBS for sending location packets."
    ::= { hh3cWlanCommonConfigEntry 8 }

hh3cWlanClientRateLimitStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of client packet rate limiting."
    ::= { hh3cWlanCommonConfigEntry 9 }

hh3cWlanClientRateLimitCir OBJECT-TYPE
    SYNTAX      Integer32(0..1300000)
    UNITS       "Kbps"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the CIR for receiving client packets."
    ::= { hh3cWlanCommonConfigEntry 10 }

hh3cWlanClientRateLimitCbs OBJECT-TYPE
    SYNTAX      Integer32(0|80..130000000)
    UNITS       "Bytes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the CBS for receiving client packets."
    ::= { hh3cWlanCommonConfigEntry 11 }

hh3cWlanRssiStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of RSSI-based packet filtering."
    ::= { hh3cWlanCommonConfigEntry 12 }

hh3cWlanRssiThreshold OBJECT-TYPE
    SYNTAX      Integer32(5..100)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the max RSSI value of clients' packets."
    ::= { hh3cWlanCommonConfigEntry 13 }

hh3cWlanIgnoreApFrame OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of AP packet ignoring."
    ::= { hh3cWlanCommonConfigEntry 14 }

-- *****************************************************************************
-- * End of hh3cWlanCommonConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanCUPIDConfigTable Definition
-- *****************************************************************************
hh3cWlanCUPIDConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanCUPIDConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure CUPID parameters."
    ::= { hh3cWlanCUPIDConfigGroup 1 }

hh3cWlanCUPIDConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanCUPIDConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains CUPID location configuration information."
    INDEX
        {
            hh3cWlanCupidAPSerialID
        }
    ::= { hh3cWlanCUPIDConfigTable 1 }

Hh3cWlanCUPIDConfigEntry ::= SEQUENCE
    {
        hh3cWlanCupidAPSerialID             OCTET STRING,
        hh3cWlanCupidStatus                 TruthValue,
        hh3cWlanCupidEngineAddr             IpAddress,
        hh3cWlanCupidEnginePort             Integer32,
        hh3cWlanCupidVendorPort             Integer32,
        hh3cWlanCupidReportStatus           TruthValue,
        hh3cWlanCupidReportInterval         Integer32,
        hh3cWlanCupidUnassSta               TruthValue,
        hh3cWlanCupidUnassMeasureSta        TruthValue,
        hh3cWlanCupidReportMode             INTEGER,
        hh3cWlanCUPIDReportFormat           INTEGER
    }

hh3cWlanCupidAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanCUPIDConfigEntry 1 }

hh3cWlanCupidStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of CUPID location."
    ::= { hh3cWlanCUPIDConfigEntry 2 }

hh3cWlanCupidEngineAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the IPv4 address of the CUPID location server."
    ::= { hh3cWlanCUPIDConfigEntry 3 }

hh3cWlanCupidEnginePort OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port of the CUPID location server."
    ::= { hh3cWlanCUPIDConfigEntry 4 }

hh3cWlanCupidVendorPort OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port to listen for CUPID messages from the server."
    ::= { hh3cWlanCUPIDConfigEntry 5 }

hh3cWlanCupidReportStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of CUPID location reporting."
    ::= { hh3cWlanCUPIDConfigEntry 6 }

hh3cWlanCupidReportInterval OBJECT-TYPE
    SYNTAX      Integer32(1..10)
    UNITS       "Second"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the interval for sending CUPID location packets."
    ::= { hh3cWlanCUPIDConfigEntry 7 }

hh3cWlanCupidUnassSta OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of unassociated client information
         reporting for CUPID location."
    ::= { hh3cWlanCUPIDConfigEntry 8 }

hh3cWlanCupidUnassMeasureSta OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of CUPID location for unassociated clients."
    ::= { hh3cWlanCUPIDConfigEntry 9 }

hh3cWlanCupidReportMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
          local(1),
          central(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the report mode."
    ::= { hh3cWlanCUPIDConfigEntry 10 }

hh3cWlanCUPIDReportFormat OBJECT-TYPE
    SYNTAX      INTEGER
        {
          general(1),
          lightweight(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the report format."
    ::= { hh3cWlanCUPIDConfigEntry 11 }

-- *****************************************************************************
-- * End of hh3cWlanCUPIDConfigTable Definition
-- *****************************************************************************

-- *****************************************************************************
-- *  hh3cWlanFPConfigTable Definition
-- *****************************************************************************
hh3cWlanFPConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cWlanFPConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Administrators must configure RF fingerprinting parameters."
    ::= { hh3cWlanFPConfigGroup 1 }

hh3cWlanFPConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cWlanFPConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry contains RF fingerprinting configuration information."
    INDEX
        {
            hh3cWlanFPAPSerialID
        }
    ::= { hh3cWlanFPConfigTable 1 }

Hh3cWlanFPConfigEntry ::= SEQUENCE
    {
        hh3cWlanFPAPSerialID         OCTET STRING,
        hh3cWlanFPStatus             TruthValue,
        hh3cWlanFPEngineAddr         IpAddress,
        hh3cWlanFPEnginePort         Integer32,
        hh3cWlanFPVendorPort         Integer32,
        hh3cWlanFPRawFrameReport     TruthValue,
        hh3cWlanFPMUReport           TruthValue,
        hh3cWlanFPReportMode         INTEGER,
        hh3cWlanFPReportFormat       INTEGER,
        hh3cWlanFPTagMultiAddr       MacAddress
    }

hh3cWlanFPAPSerialID OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..127))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object represents the serial ID of an AP."
    ::= { hh3cWlanFPConfigEntry 1 }

hh3cWlanFPStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the enabled or disabled status of RF fingerprinting."
    ::= { hh3cWlanFPConfigEntry 2 }

hh3cWlanFPEngineAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the IPv4 address of the RF fingerprinting server."
    ::= { hh3cWlanFPConfigEntry 3 }

hh3cWlanFPEnginePort OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port of the RF fingerprinting server."
    ::= { hh3cWlanFPConfigEntry 4 }

hh3cWlanFPVendorPort OBJECT-TYPE
    SYNTAX      Integer32(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the UDP port to listen for RF fingerprinting
         packets from the server."
    ::= { hh3cWlanFPConfigEntry 5 }

hh3cWlanFPRawFrameReport OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of raw frame reporting for RF fingerprinting."
    ::= { hh3cWlanFPConfigEntry 6 }

hh3cWlanFPMUReport OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the status of MU information reporting for RF fingerprinting."
    ::= { hh3cWlanFPConfigEntry 7 }

hh3cWlanFPReportMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
          local(1),
          central(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the report mode."
    ::= { hh3cWlanFPConfigEntry 8 }

hh3cWlanFPReportFormat OBJECT-TYPE
    SYNTAX      INTEGER
        {
          general(1),
          lightweight(2),
          cupidhybrid(3)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents the report format."
    ::= { hh3cWlanFPConfigEntry 9 }

hh3cWlanFPTagMultiAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object represents Tag's multicast MAC address."
    ::= { hh3cWlanFPConfigEntry 10 }
-- *****************************************************************************
-- * End of hh3cWlanFPConfigTable Definition
-- *****************************************************************************

END