david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/dasan/SLE-MLSQOS-MIB

5232 lines
144 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- sle-mlsqos-mib.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
-- Monday, May 16, 2016 at 14:59:46
--
SLE-MLSQOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
sleMgmt
FROM DASAN-SMI
SleControlStatusType, SleControlRequestResultType
FROM SLE-TC-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
OBJECT-GROUP
FROM SNMPv2-CONF
TimeTicks, Integer32, Unsigned32, Gauge32, Counter64,
OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
sleMlsQos MODULE-IDENTITY
LAST-UPDATED "201310040903Z" -- October 04, 2013 at 09:03 GMT
ORGANIZATION
" "
CONTACT-INFO
" "
DESCRIPTION
"This MIB contains all informations about ML QOS supported features."
REVISION "201308040903Z" -- August 04, 2013 at 09:03 GMT
DESCRIPTION
" "
::= { sleMgmt 28 }
--
-- Textual conventions
--
MlsQosStatusType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enable(1) : enabled in the system.
Disable(0) : Disable in system."
SYNTAX INTEGER
{
enable(1),
disable(0)
}
MlsQosMappingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"CosToCos(1) :
CosToQueue(2) :
DscpToDscp(3) :
DscpToQueue(4) :
ExpToExp(5) :
ExpToQueue(6) : "
SYNTAX INTEGER
{
cosToCos(1),
cosToQueue(2),
dscpToDscp(3),
dscpToQueue(4),
expToExp(5),
expToQueue(6),
expToClass(7)
}
ACLMatchType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" ACL Match Types
mac (1),
EthType (2)
L3Proto(3)"
SYNTAX INTEGER
{
mac(1),
ethType(2),
l3Proto(3)
}
ACLMatchActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"deny(0) deny the packets
permit(1) permit.
remark(2) mark the packets "
SYNTAX INTEGER
{
deny(0),
permit(1),
remark(2)
}
ACLEtherType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" WORD Ethertype value - (0x600-0xffff)
ip4 IPv4 Ethertype - 0x0800
ip6 IPv6 Ethertype - 0x86dd
mpls MPLS Ethertype - 0x8847"
SYNTAX OCTET STRING
AclTcpUdpPortActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
eq(1) Equals to
neq(2) Not equals to
lt(3) Lower Than
gt(4) Greather Than"
SYNTAX INTEGER
{
eq(1),
neq(2),
lt(3),
gt(4)
}
ClassMapMatchType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"cos (1) ,
innerCos(2),
ipDscp (3),
ipPrecedence (4),
ip6Dscp (5),
ip6Precedence (6),
tcpSrcPort (7),
tcpDstPort (8),
udpSrcPort (9),
udpDstPort (10),
VlanId (11),
innerVlanId (12),
layer4SrcPort (13)
layer4DstPort (14)"
SYNTAX INTEGER
{
cos(1),
innerCos(2),
ipDscp(3),
ipPrecedence(4),
ip6Dscp(5),
ip6Precedence(6),
tcpSrcPort(7),
tcpDstPort(8),
udpSrcPort(9),
udpDstPort(10),
vlanId(11),
innerVlanId(12),
layer4SrcPort(13),
layer4DstPort(14)
}
ClassMapMatchRangeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"tcpSrcPort (1),
tcpDstPort (2),
udpSrcPort (3),
udpDstPort (4),
VlanId (5),
layer4SrcPort (6),
layer4DstPort (7)"
SYNTAX INTEGER
{
tcpSrcPort(1),
tcpDstPort(2),
udpSrcPort(3),
udpDstPort(4),
vlanId(5),
layer4SrcPort(6),
layer4DstPort(7)
}
PmapPriorityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" low(0)
medium(1)
high(2)
highest(3)"
SYNTAX INTEGER
{
low(0),
medium(1),
high(2),
highest(3)
}
PmapPoliceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" srtcm(1)
trtcm(2)"
SYNTAX INTEGER
{
srtcm(1),
trtcm(2)
}
PmapExceedActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" none (0)
drop (1)
set-dscp-transmit (2)
set-tos-transmit (3)
set-cos-transmit (4)
transmit (7)"
SYNTAX INTEGER
{
none(0),
drop(1),
setDscpTransmit(2),
setTosTransmit(3),
setCosTransmit(4),
transmit(7)
}
PmapViolateActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" none(0)
drop(1)
set-dscp-transmit(2)
set-cos-transmit(3)
set-tos-transmit(4)
transmit (5)"
SYNTAX INTEGER
{
none(0),
drop(1),
dscpTx(2),
cosTx(3),
tosTx(4),
transmit(5)
}
PmapSetActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" cos (1),
cpu-cos (2),
ip-dscp (3),
ip-precedence (4),
redirect-to-port (5),
mirror-to-port (6),
vlan (7),
ip6-dscp (8),
ip6-precedence (9),
cpu-copy (10),
deny (11),
qos-group(12),
none(13),
queue(14),
vlan-cos(15)"
SYNTAX INTEGER
{
cos(1),
cpuCos(2),
ipDscp(3),
ipPrecedence(4),
redirectToPort(5),
mirrorToPort(6),
vlan(7),
ip6Dscp(8),
ip6Precedence(9),
cpuCopy(10),
deny(11),
qosGroup(12),
none(13),
queue(14),
vlanCos(15)
}
MlsQosIntfTrustState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"cos (1)
dscp (2)"
SYNTAX INTEGER
{
cos(1),
dscp(2)
}
MlsQosInterfaceMapingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
cos (1) Configure interface default CoS values
cos-cos (2) Specify cos-cos
cos-queue (3) Specify cos-queue map
dscp (4) Set the default DSCP vlaue
dscp-dscp(5) Specify dscp-dscp
dscp-queue (6) DSCP-to-QUEUE
exp-exp(7) Specify exp-exp
trust (8) Configure port trust state
trust-passthrough (9) COnfigure port trust pass-through state
cosToClass (10) configure cos to class
dscpToClass (11) configure dscp to class"
SYNTAX INTEGER
{
cos(1),
cosToCos(2),
cosToQueue(3),
dscp(4),
dscpToDscp(5),
dscpToQueue(6),
expToExp(7),
trust(8),
trustPassThrough(9),
cosToClass(10),
dscpToClass(11)
}
MlsQosIntfQueProfilingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"shaping (1),
wrrQWt (2),
wrrRandomDetect (3),
tailDrop (4),
strictQ (5)"
SYNTAX INTEGER
{
shaping(1),
wrrQWt(2),
wrrRandomDetect(3),
tailDrop(4),
strictQ(5),
reservedBandwidth(6)
}
ACLMacType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
src(1) Src Mac
dst(2) Dst Mac
srcWildcard(3) Src Wildcard bits
dstWildcard(4) Dst Wildcard Bits "
SYNTAX INTEGER
{
src(1),
dst(2),
srcWildcard(3),
dstWildcard(4)
}
ACLIpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
src(1) Src Mac
dst(2) Dst Mac
srcWildcard(3) Src Wildcard bits
dstWildcard(4) Dst Wildcard Bits
host(5)
any(6)"
SYNTAX INTEGER
{
src(1),
dst(2),
srcWildcard(3),
dstWildcard(4)
}
PolMapClassMatchPrioType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"high(1) :
highest(2) :
low(3) :
medium(4) : "
SYNTAX INTEGER
{
high(1),
highest(2),
low(3),
medium(4)
}
PoliceExceedActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"drop(1) :
set-cos-transmit(2) :
set-dscp-transmit(3) :
set-tos-transmit(4) :
transmit (5)"
SYNTAX INTEGER
{
drop(1),
setCosTransmit(2),
setDscpTransmit(3),
setTosTransmit(4),
transmit(5)
}
--
-- Node definitions
--
sleMlsQosGlobal OBJECT IDENTIFIER ::= { sleMlsQos 1 }
sleMlsQosGlobalInfo OBJECT IDENTIFIER ::= { sleMlsQosGlobal 1 }
sleMlsQosStatus OBJECT-TYPE
SYNTAX MlsQosStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Enable / Disable MlQos
enable (1)
disable (0) "
::= { sleMlsQosGlobalInfo 1 }
sleMlsQosMapCosToCos OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global incoming Cos to outgoing Cos mapping."
::= { sleMlsQosGlobalInfo 2 }
sleMlsQosMapCosToQueue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global incoming Cos to outgoing queue mapping."
::= { sleMlsQosGlobalInfo 3 }
sleMlsQosMapDscpToDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global incoming dscp to outgoing dscp mapping."
::= { sleMlsQosGlobalInfo 4 }
sleMlsQosMapDscpToQueue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global incoming dscp to outgoing queue mapping."
::= { sleMlsQosGlobalInfo 5 }
sleMlsQosMapExpToExp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global incoming exp to outgoing exp mapping."
::= { sleMlsQosGlobalInfo 6 }
sleMlsQosMapExpToQueue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global incoming exp to outgoing queue mapping."
::= { sleMlsQosGlobalInfo 7 }
sleMlsQosMapStrictQueueId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queues with Strict scheduling"
::= { sleMlsQosGlobalInfo 8 }
sleMlsQosMapWrrQueueWeight OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queue weight for Weighted round robin scheduling.
If the queue wt is given 0, then the queue becomes strict queue"
::= { sleMlsQosGlobalInfo 9 }
sleMlsQosMapCpuMaxPpsRate OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate limiting for CPU. Defines Max packets per second to CPU"
::= { sleMlsQosGlobalInfo 10 }
sleMlsQosMapCpuQueueWeight OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"weight for Cpu Queues"
::= { sleMlsQosGlobalInfo 11 }
sleMlsQosMapNodeCpuMaxPpsRate OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"node Rate limiting for CPU. Defines Max packets per second to CPU"
::= { sleMlsQosGlobalInfo 12 }
sleMlsQosMapNodeCpuQueueWeight OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"node weight for Cpu Queues"
::= { sleMlsQosGlobalInfo 13 }
sleMlsQosMapExpToClass OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Exp - to - class mapping"
::= { sleMlsQosGlobalInfo 14 }
sleHQosStatistics OBJECT-TYPE
SYNTAX MlsQosStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hqos has feature to disable or enable
statistics so this object is only applicable
when hqos is enabled"
::= { sleMlsQosGlobalInfo 15 }
sleQosPhbPriorityColor OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"qos phb-priority-color
Ex: PHB Name | Priority Color
-------------------------------------------
be | 0 red
cs0 | 0 green
cs1 | 1 green
af11 | 1 yellow
af12 | 1 red
af13 | 0 green
cs2 | 2 green
af21 | 2 green
af22 | 2 yellow
af23 | 2 red
cs3 | 3 green
af31 | 4 red
af32 | 3 green
af33 | 3 yellow
cs4 | 4 green
af41 | 5 yellow
af42 | 5 red
af43 | 4 green
cs5 | 5 green
ef | 6 red
cs6 | 6 yellow
cs7 | 7 green"
::= { sleMlsQosGlobalInfo 16 }
sleHQosDefaultClassToDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default Class to DSCP
Ex: QoS PHB map to DSCP:
PHB Name | dscp
-------------------------------------------
be | 0
be | 0
cs1 | 9
af11 | 10
af12 | 12
af13 | 14
cs2 | 16
af21 | 18
af22 | 20
af23 | 22
cs3 | 24
af31 | 26
af32 | 28
af33 | 30
cs4 | 32
af41 | 34
af42 | 35
af43 | 38
cs5 | 40
ef | 46
cs6 | 48
cs7 | 56"
::= { sleMlsQosGlobalInfo 17 }
sleQosDefaultCosToClassTrust OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"qos default cos to class trust
Ex:QoS Cos+Cfi/DEI to CLASS:
COS CFI/DEI | CLASS
-------------------------------------------
0 0 | cs0
0 1 | cs0
1 0 | cs1
1 1 | cs1
2 0 | cs2
2 1 | cs2
3 0 | cs3
3 1 | cs3
4 0 | cs4
4 1 | cs4
5 0 | cs5
5 1 | cs5
6 0 | cs6
6 1 | cs6
7 0 | cs7
7 1 | cs7"
::= { sleMlsQosGlobalInfo 18 }
sleQosDefaultCosToClassNoTrust OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"qos Default cos to class no trust
Ex:
QoS Cos+Cfi/DEI to CLASS:
COS CFI/DEI | CLASS
-------------------------------------------
0 0 | be
0 1 | be
1 0 | be
1 1 | be
2 0 | be
2 1 | be
3 0 | be
3 1 | be
4 0 | be
4 1 | be
5 0 | be
5 1 | be
6 0 | be
6 1 | be
7 0 | be
7 1 | be"
::= { sleMlsQosGlobalInfo 19 }
sleQosDefaultDscpToClassTrust OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"qos default dscp to class trust
Ex: QoS Dscp to CLASS:
DSCP | CLASS
-------------------------------------------
0 | be
1 | be
2 | be
3 | be
4 | be
5 | be
6 | be
7 | be
8 | cs1
9 | be
10 | af11
11 | be
12 | af12
13 | be
14 | af13
15 | be
16 | cs2
17 | be
18 | af21
19 | be
20 | af22
21 | be
22 | af23
23 | be
24 | cs3
25 | be
26 | af31
27 | be
28 | af32
29 | be
30 | af33
31 | be
32 | cs4
33 | be
34 | af41
35 | be
36 | af42
37 | be
38 | af43
39 | be
40 | cs5
41 | be
42 | be
43 | be
44 | be
45 | be
46 | ef
47 | be
48 | cs6
49 | be
50 | be
51 | be
52 | be
53 | be
54 | be
55 | be
56 | cs7
57 | be
58 | be
59 | be
60 | be
61 | be
62 | be
63 | be
"
::= { sleMlsQosGlobalInfo 20 }
sleQosDefaultDscpToClassNoTrust OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"qos defualt dscp to class no trust
Ex:
QoS Dscp to CLASS:
DSCP | CLASS
-------------------------------------------
0 | be
1 | be
2 | be
3 | be
4 | be
5 | be
6 | be
7 | be
8 | be
9 | be
10 | be
11 | be
12 | be
13 | be
14 | be
15 | be
16 | be
17 | be
18 | be
19 | be
20 | be
21 | be
22 | be
23 | be
24 | be
25 | be
26 | be
27 | be
28 | be
29 | be
30 | be
31 | be
32 | be
33 | be
34 | be
35 | be
36 | be
37 | be
38 | be
39 | be
40 | be
41 | be
42 | be
43 | be
44 | be
45 | be
46 | be
47 | be
48 | be
49 | be
50 | be
51 | be
52 | be
53 | be
54 | be
55 | be
56 | be
57 | be
58 | be
59 | be
60 | be
61 | be
62 | be
63 | be"
::= { sleMlsQosGlobalInfo 21 }
sleMlsQosGlobalControl OBJECT IDENTIFIER ::= { sleMlsQosGlobal 2 }
sleMlsQosGlobalControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setMlQosStatus(1),
setMlsQosMapping(2),
unSetMlsQosMapping(3),
setMlsQosStrictQueue(4),
unSetMlsQosStrictQueue(5),
setMlsQosWrr(6),
unSetMlsQosWrr(7),
setMlsQosCpuRate(8),
setMlsQosCpuQueueWt(9),
setMlsQosNodeCpuRate(10),
setMlsQosNodeCpuQueueWt(11),
setHQosStatistics(12),
unsetHQosStatistics(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration commands, and user can configure
functions via setting this entry as proper value."
::= { sleMlsQosGlobalControl 1 }
sleMlsQosGlobalControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosGlobalControl 2 }
sleMlsQosGlobalCtrlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosGlobalControl 3 }
sleMlsQosGlobalControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosGlobalControl 4 }
sleMlsQosGlobalControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosGlobalControl 5 }
sleMlsQosCtrlGlobalStatus OBJECT-TYPE
SYNTAX MlsQosStatusType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable / Disable MlQos
enable (1)
disable (0) "
::= { sleMlsQosGlobalControl 6 }
sleMlsQosGlobalControlMappingType OBJECT-TYPE
SYNTAX MlsQosMappingType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Below Mapping Types can be configured
cosToCos(1),
cosToQueue(2),
dscpToDscp(3),
dscpToQueue(4),
expToExp(5),
expToQueue(6)
expToClass(7)"
::= { sleMlsQosGlobalControl 7 }
sleMlsQosGlobalControlMappingIngValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ingress or incoming mapping values.
Based on sleMlsQosGlobalControlMappingType, this value has to be set.
Ex.
If sleMlsQosGlobalControlMappingType = cosToCos, then
sleMlsQosGlobalControlMappingIngValue = Incoming or ingress COS value"
::= { sleMlsQosGlobalControl 8 }
sleMlsQosGlobalControlMappingEgrValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress or outgoing mapping values.
Based on sleMlsQosGlobalControlMappingType, this value has to be set.
Ex.
If sleMlsQosGlobalControlMappingType = cosToCos, then
sleMlsQosGlobalControlMappingEgrValue = outgoing or egress COS value"
::= { sleMlsQosGlobalControl 9 }
sleMlsQosGlobalControlQueueId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue Id"
::= { sleMlsQosGlobalControl 10 }
sleMlsQosGlobalControlWrrQueueWeight OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue weight for weighted round robin scheduling.
This value is set for the Queue Id configured via sleMlsQosGlobalControlQueueId"
::= { sleMlsQosGlobalControl 11 }
sleMlsQosGlobalControlCpuMaxPpsRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limiting for CPU. Defines Max packets per second to CPU
This value is set for the Queue Id configured via sleMlsQosGlobalControlQueueId"
::= { sleMlsQosGlobalControl 12 }
sleMlsQosGlobalControlCpuQueueWt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Weight for CPU Queue.
This value is set for the Queue Id configured via sleMlsQosGlobalControlQueueId"
::= { sleMlsQosGlobalControl 13 }
sleMlsQosGlobalControlNodeId OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Node Id"
::= { sleMlsQosGlobalControl 14 }
sleMlsQosGlobalControlMappingEgrClassValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress or outgoing mapping value is only for exp to class
Diffserv class alias, eg: be, ef, af11 etc.
If sleMlsQosGlobalControlMappingType is exp-to-class, this value has to be set.
Ex.
If sleMlsQosGlobalControlMappingType = exp-to-class, then
sleMlsQosGlobalControlMappingEgrValue = outgoing or egress class value"
::= { sleMlsQosGlobalControl 15 }
sleMlsQosAggPolice OBJECT IDENTIFIER ::= { sleMlsQos 2 }
sleMlsQosAggPoliceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMlsQosAggPoliceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aggrgegate Policy Table"
::= { sleMlsQosAggPolice 1 }
sleMlsQosAggPoliceEntry OBJECT-TYPE
SYNTAX SleMlsQosAggPoliceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { sleMlsQosAggPoliceIndex }
::= { sleMlsQosAggPoliceTable 1 }
SleMlsQosAggPoliceEntry ::=
SEQUENCE {
sleMlsQosAggPoliceIndex
Integer32,
sleMlsQosAggPoliceName
OCTET STRING,
sleMlsQosAggPoliceTrafficRate
Integer32,
sleMlsQosAggPoliceBurstSize
Integer32
}
sleMlsQosAggPoliceIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Police index"
::= { sleMlsQosAggPoliceEntry 1 }
sleMlsQosAggPoliceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Police Name"
::= { sleMlsQosAggPoliceEntry 2 }
sleMlsQosAggPoliceTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Traffic Rate configured for the Aggregate police profile"
::= { sleMlsQosAggPoliceEntry 3 }
sleMlsQosAggPoliceBurstSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Burst Size configured for the Aggregate police profile"
::= { sleMlsQosAggPoliceEntry 4 }
sleMlsQosAggPoliceControl OBJECT IDENTIFIER ::= { sleMlsQosAggPolice 2 }
sleMlsQosAggPoliceCtrlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createAggrPolice(1),
deleteAggrPolice(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure functions via setting this entry as proper value."
::= { sleMlsQosAggPoliceControl 1 }
sleMlsQosAggPoliceCtrlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosAggPoliceControl 2 }
sleMlsQosAggPoliceConfigCtrlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosAggPoliceControl 3 }
sleMlsQosAggPoliceCtrlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosAggPoliceControl 4 }
sleMlsQosAggPoliceCtrlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosAggPoliceControl 5 }
sleMlsQosAggPoliceCtrlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aggregator Police Name"
::= { sleMlsQosAggPoliceControl 6 }
sleMlsQosAggPoliceCtrlTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Traffic Rate configured for the Aggrgegate Police profile"
::= { sleMlsQosAggPoliceControl 7 }
sleMlsQosAggPoliceCtrlBurstSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Traffic Rate configured for the Aggrgegate Police profile"
::= { sleMlsQosAggPoliceControl 8 }
sleMlsQosACL OBJECT IDENTIFIER ::= { sleMlsQos 3 }
sleMlsQosACLTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMlsQosACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { sleMlsQosACL 1 }
sleMlsQosACLEntry OBJECT-TYPE
SYNTAX SleMlsQosACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { sleMlsQosACLIndex, sleMlsQosACLFilterIndex }
::= { sleMlsQosACLTable 1 }
SleMlsQosACLEntry ::=
SEQUENCE {
sleMlsQosACLIndex
Integer32,
sleMlsQosACLFilterIndex
Integer32,
sleMlsQosACLName
OCTET STRING,
sleMlsQosACLMatchType
ACLMatchType,
sleMlsQosACLMatchAction
ACLMatchActionType,
sleMlsQosACLEtherType
ACLEtherType,
sleMlsQosACLL3Protocol
Integer32,
sleMlsQosACLSrcIpAddress
OCTET STRING,
sleMlsQosACLDstIpAddress
OCTET STRING,
sleMlsQosACLSrcIpAddrMask
OCTET STRING,
sleMlsQosACLDstIpAddrMask
OCTET STRING,
sleMlsQosACLSrcMacAddress
OCTET STRING,
sleMlsQosACLDstMacAddress
OCTET STRING,
sleMlsQosACLSrcMacAddrMask
OCTET STRING,
sleMlsQosACLDstMacAddrMask
OCTET STRING,
sleMlsQosACLTcpUdpSrcPortAction
AclTcpUdpPortActionType,
sleMlsQosACLTcpUdpDstPortAction
AclTcpUdpPortActionType,
sleMlsQosACLTcpUdpSrcPort
Integer32,
sleMlsQosACLTcpUdpDstPort
Integer32,
sleMlsQosACLNameSrcIpExactMatch
Integer32,
sleMlsQosACLActionRemarkDesc
OCTET STRING,
sleMlsQosACLIcmpType
Integer32,
sleMlsQosACLIcmpCode
Integer32,
sleMlsQosACLTcpUdpSrcPortEnd
Integer32,
sleMlsQosACLTcpUdpDstPortEnd
Integer32
}
sleMlsQosACLIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the table.
This is a running index number, which will be generated internally"
::= { sleMlsQosACLEntry 1 }
sleMlsQosACLFilterIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filter Index for the table.
This is a running index number, which will be generated internally"
::= { sleMlsQosACLEntry 2 }
sleMlsQosACLName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Access Control List Num.
<1-99> standard access list
<100-199> extended access list
<1300-1999> standard access list (expanded range)
<2000-2699> extended access list (expanded range)
<WORD> Name of the access list"
::= { sleMlsQosACLEntry 3 }
sleMlsQosACLMatchType OBJECT-TYPE
SYNTAX ACLMatchType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ACL MATCH Type
mac (1),
EthType(2),
l3Proto (3)"
::= { sleMlsQosACLEntry 4 }
sleMlsQosACLMatchAction OBJECT-TYPE
SYNTAX ACLMatchActionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ACL Actions
deny(0) deny the packets
permit(1) permit.
remark(2) mark the packets"
::= { sleMlsQosACLEntry 5 }
sleMlsQosACLEtherType OBJECT-TYPE
SYNTAX ACLEtherType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ACL ethertype to be matched.
ip4(0) ipv4 packets
ip6(1) ipv6 packets.
mpls(3) mpls packets "
::= { sleMlsQosACLEntry 6 }
sleMlsQosACLL3Protocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ACL protocols to be matched.
0-255 : IANA protocol numbers
256 - any
Some important protocol Numbers
GRE - 47
IGMP -2
IPV4 - 4
IPComp - 108
OSPF - 89
RSVP - 46
PIM - 103
VRRP - 112"
::= { sleMlsQosACLEntry 7 }
sleMlsQosACLSrcIpAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Src Ip Address "
::= { sleMlsQosACLEntry 8 }
sleMlsQosACLDstIpAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" DST Address"
::= { sleMlsQosACLEntry 9 }
sleMlsQosACLSrcIpAddrMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" SRC Address Mask"
::= { sleMlsQosACLEntry 10 }
sleMlsQosACLDstIpAddrMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" DST Address Mask"
::= { sleMlsQosACLEntry 11 }
sleMlsQosACLSrcMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Src MAC Address "
::= { sleMlsQosACLEntry 12 }
sleMlsQosACLDstMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" DST MAC Address"
::= { sleMlsQosACLEntry 13 }
sleMlsQosACLSrcMacAddrMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" SRC Address Mask"
::= { sleMlsQosACLEntry 14 }
sleMlsQosACLDstMacAddrMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" DST Address Mask"
::= { sleMlsQosACLEntry 15 }
sleMlsQosACLTcpUdpSrcPortAction OBJECT-TYPE
SYNTAX AclTcpUdpPortActionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" TCP/UDP Src port action
0 - no-action
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range"
::= { sleMlsQosACLEntry 16 }
sleMlsQosACLTcpUdpDstPortAction OBJECT-TYPE
SYNTAX AclTcpUdpPortActionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" TCP/UDP Dst port action
0 - no-action
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range"
::= { sleMlsQosACLEntry 17 }
sleMlsQosACLTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" TCP/UDP Src port ."
::= { sleMlsQosACLEntry 18 }
sleMlsQosACLTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" TCP/UDP Dst port ."
::= { sleMlsQosACLEntry 19 }
sleMlsQosACLNameSrcIpExactMatch OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Exact Match"
::= { sleMlsQosACLEntry 20 }
sleMlsQosACLActionRemarkDesc OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Remark Description"
::= { sleMlsQosACLEntry 21 }
sleMlsQosACLIcmpType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The object is used to display the ICMP type of control message
Description Type Code
echo-reply 0 0
net-unreachable 3 0
host-unreachable 3 1
protocol-unreachable 3 2
port-unreachable 3 3
packet-too-big 3 4
source-route-failed 3 5
network-unknown 3 6
host-unknown 3 7
host-isolated 3 8
dod-net-prohibited 3 9
dod-host-prohibited 3 10
net-tos-unreachable 3 11
host-tos-unreachable 3 12
administratively-prohibited 3 13
host-precedence-unreachable 3 14
precedence-unreachable 3 15
source-quench 4 0
net-redirect 5 0
host-redirect 5 1
net-tos-redirect 5 2
host-tos-redirect 5 3
alternate-address 6 -1
echo 8 0
router-advertisement 9 0
router-solicitation 10 0
time-exceeded 11 -1
ttl-exceeded 11 0
reassembly-timeout 11 1
parameter-problem 12 -1
no-room-for-option 12 0
option-missing 12 1
timestamp-request 13 0
timestamp-reply 14 0
information-request 15 0
information-reply 16 0
mask-request 17 0
mask-reply 18 0
traceroute 30 -1
conversion-error 31 -1
mobile-redirect 32 -1
"
::= { sleMlsQosACLEntry 22 }
sleMlsQosACLIcmpCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The object is used to display the ICMP code of control message
Description Type Code
echo-reply 0 0
net-unreachable 3 0
host-unreachable 3 1
protocol-unreachable 3 2
port-unreachable 3 3
packet-too-big 3 4
source-route-failed 3 5
network-unknown 3 6
host-unknown 3 7
host-isolated 3 8
dod-net-prohibited 3 9
dod-host-prohibited 3 10
net-tos-unreachable 3 11
host-tos-unreachable 3 12
administratively-prohibited 3 13
host-precedence-unreachable 3 14
precedence-unreachable 3 15
source-quench 4 0
net-redirect 5 0
host-redirect 5 1
net-tos-redirect 5 2
host-tos-redirect 5 3
alternate-address 6 -1
echo 8 0
router-advertisement 9 0
router-solicitation 10 0
time-exceeded 11 -1
ttl-exceeded 11 0
reassembly-timeout 11 1
parameter-problem 12 -1
no-room-for-option 12 0
option-missing 12 1
timestamp-request 13 0
timestamp-reply 14 0
information-request 15 0
information-reply 16 0
mask-request 17 0
mask-reply 18 0
traceroute 30 -1
conversion-error 31 -1
mobile-redirect 32 -1
"
::= { sleMlsQosACLEntry 23 }
sleMlsQosACLTcpUdpSrcPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" End port for TCP/UDP source port range."
::= { sleMlsQosACLEntry 24 }
sleMlsQosACLTcpUdpDstPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" End port for TCP/UDP destination port range."
::= { sleMlsQosACLEntry 25 }
sleMlsQosACLControl OBJECT IDENTIFIER ::= { sleMlsQosACL 2 }
sleMlsQosACLControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setStandAclMatchSrcIp(1),
unSetStandAclMatchSrcIp(2),
setExtenAclMatchMac(3),
unSetExtenAclMatchMac(4),
setExtenAclMatchEthType(5),
unSetExtenAclMatchEthType(6),
setExtenAclMatchL3Proto(7),
unSetExtenAclMatchL3Proto(8),
setExtenAclMatchTcpUdp(9),
unSetExtenAclMatchTcpUdp(10),
setAclNameSrcIp(11),
unSetAclNameSrcIp(12),
setAclWithActionRemark(13),
unSetAclWithActionRemark(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure functions via setting this entry as proper value."
::= { sleMlsQosACLControl 1 }
sleMlsQosACLControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosACLControl 2 }
sleMlsQosACLConfigControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosACLControl 3 }
sleMlsQosACLControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosACLControl 4 }
sleMlsQosACLControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosACLControl 5 }
sleMlsQosACLCtrlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Access Control List Name.
<1-99> standard access list
<100-199> extended access list
<1300-1999> standard access list (expanded range)
<2000-2699> extended access list (expanded range)
<word> Name for the access list"
::= { sleMlsQosACLControl 6 }
sleMlsQosACLCtrlMatchType OBJECT-TYPE
SYNTAX ACLMatchType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL Match Types
mac (1),
EthType(2),
l3Proto (3)"
::= { sleMlsQosACLControl 7 }
sleMlsQosACLCtrlMatchAction OBJECT-TYPE
SYNTAX ACLMatchActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL Actions
deny(0) deny the packets
permit(1) Permit packets
remark(2) mark the packets"
::= { sleMlsQosACLControl 8 }
sleMlsQosACLCtrlEtherType OBJECT-TYPE
SYNTAX ACLEtherType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL MAC ethertype to be matched.
WORD Ethertype value - (0x600-0xffff)
ip4 IPv4 Ethertype - 0x0800
ip6 IPv6 Ethertype - 0x86dd
mpls MPLS Ethertype - 0x8847"
::= { sleMlsQosACLControl 9 }
sleMlsQosACLCtrlL3Protocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL protocols to be matched.
0-255 : IANA protocol numbers
256 - any
Some important protocol Numbers
GRE - 47
IGMP -2
IPV4 - 4
IPComp - 108
OSPF - 89
RSVP - 46
PIM - 103
VRRP - 112"
::= { sleMlsQosACLControl 10 }
sleMlsQosACLCtrlSrcAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL SrcAddress.
1. MAC address
2. IP Address
3. Any"
::= { sleMlsQosACLControl 11 }
sleMlsQosACLCtrlDstAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL SrcAddress.
1. MAC address
2. IP Address
3. Any"
::= { sleMlsQosACLControl 12 }
sleMlsQosACLCtrlSrcAddrMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL Src Addr Mask.
1. MAC address
2. IP Address"
::= { sleMlsQosACLControl 13 }
sleMlsQosACLCtrlDstAddrMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ACL dst Addr Mask.
1. MAC address
2. IP Address"
::= { sleMlsQosACLControl 14 }
sleMlsQosACLCtrlTcpUdpSrcPortAction OBJECT-TYPE
SYNTAX AclTcpUdpPortActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" TCP/UDP Port Action to be matched.
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range"
::= { sleMlsQosACLControl 15 }
sleMlsQosACLCtrlTcpUdpDstPortAction OBJECT-TYPE
SYNTAX AclTcpUdpPortActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" TCP/UDP Port Action to be matched.
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range"
::= { sleMlsQosACLControl 16 }
sleMlsQosACLCtrlTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" TCP/UDP Src port to be matched."
::= { sleMlsQosACLControl 17 }
sleMlsQosACLCtrlTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" TCP/UDP Dst port to be matched."
::= { sleMlsQosACLControl 18 }
sleMlsQosACLCtrlAclNameExactMatch OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure Exact Match for Name"
::= { sleMlsQosACLControl 19 }
sleMlsQosACLCtrlActionRemarkDesc OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure remark description"
::= { sleMlsQosACLControl 20 }
sleMlsQosACLCtrlIcmpType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to set the ICMP type of control message
Description Type Code
echo-reply 0 0
net-unreachable 3 0
host-unreachable 3 1
protocol-unreachable 3 2
port-unreachable 3 3
packet-too-big 3 4
source-route-failed 3 5
network-unknown 3 6
host-unknown 3 7
host-isolated 3 8
dod-net-prohibited 3 9
dod-host-prohibited 3 10
net-tos-unreachable 3 11
host-tos-unreachable 3 12
administratively-prohibited 3 13
host-precedence-unreachable 3 14
precedence-unreachable 3 15
source-quench 4 0
net-redirect 5 0
host-redirect 5 1
net-tos-redirect 5 2
host-tos-redirect 5 3
alternate-address 6 -1
echo 8 0
router-advertisement 9 0
router-solicitation 10 0
time-exceeded 11 -1
ttl-exceeded 11 0
reassembly-timeout 11 1
parameter-problem 12 -1
no-room-for-option 12 0
option-missing 12 1
timestamp-request 13 0
timestamp-reply 14 0
information-request 15 0
information-reply 16 0
mask-request 17 0
mask-reply 18 0
traceroute 30 -1
conversion-error 31 -1
mobile-redirect 32 -1
"
::= { sleMlsQosACLControl 21 }
sleMlsQosACLCtrlIcmpCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to set the ICMP code of control message
Description Type Code
echo-reply 0 0
net-unreachable 3 0
host-unreachable 3 1
protocol-unreachable 3 2
port-unreachable 3 3
packet-too-big 3 4
source-route-failed 3 5
network-unknown 3 6
host-unknown 3 7
host-isolated 3 8
dod-net-prohibited 3 9
dod-host-prohibited 3 10
net-tos-unreachable 3 11
host-tos-unreachable 3 12
administratively-prohibited 3 13
host-precedence-unreachable 3 14
precedence-unreachable 3 15
source-quench 4 0
net-redirect 5 0
host-redirect 5 1
net-tos-redirect 5 2
host-tos-redirect 5 3
alternate-address 6 -1
echo 8 0
router-advertisement 9 0
router-solicitation 10 0
time-exceeded 11 -1
ttl-exceeded 11 0
reassembly-timeout 11 1
parameter-problem 12 -1
no-room-for-option 12 0
option-missing 12 1
timestamp-request 13 0
timestamp-reply 14 0
information-request 15 0
information-reply 16 0
mask-request 17 0
mask-reply 18 0
traceroute 30 -1
conversion-error 31 -1
mobile-redirect 32 -1
"
::= { sleMlsQosACLControl 22 }
sleMlsQosACLCtrlTcpUdpSrcPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" End port for TCP/UDP Src port range to be matched."
::= { sleMlsQosACLControl 23 }
sleMlsQosACLCtrlTcpUdpDstPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" End port for TCP/UDP Dst port range to be matched."
::= { sleMlsQosACLControl 24 }
sleMlsQosACLNotification OBJECT IDENTIFIER ::= { sleMlsQosACL 3 }
sleMlsQosClassMap OBJECT IDENTIFIER ::= { sleMlsQos 4 }
sleMlsQosClassMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMlsQosClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { sleMlsQosClassMap 1 }
sleMlsQosClassMapEntry OBJECT-TYPE
SYNTAX SleMlsQosClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { sleMlsQosClassMapName }
::= { sleMlsQosClassMapTable 1 }
SleMlsQosClassMapEntry ::=
SEQUENCE {
sleMlsQosClassMapName
OCTET STRING,
sleMlsQosClassMapMatchCosValue
Integer32,
sleMlsQosClassMapMatchInnerCosValue
Integer32,
sleMlsQosClassMapMatchEgressInterface
OCTET STRING,
sleMlsQosClassMapMatchEtherType
OCTET STRING,
sleMlsQosClassMapMatchSrcIpAddr
OCTET STRING,
sleMlsQosClassMapMatchDstIpAddr
OCTET STRING,
sleMlsQosClassMapMatchSrcIpMaskLen
Integer32,
sleMlsQosClassMapMatchDstIpMaskLen
Integer32,
sleMlsQosClassMapMatchSrcIpV6Addr
OCTET STRING,
sleMlsQosClassMapMatchDstIpV6Addr
OCTET STRING,
sleMlsQosClassMapMatchSrcIpV6MaskLen
Integer32,
sleMlsQosClassMapMatchDstIpV6MaskLen
Integer32,
sleMlsQosClassMapMatchIpDscp
Integer32,
sleMlsQosClassMapMatchIpPrecedence
Integer32,
sleMlsQosClassMapMatchIp6Dscp
Integer32,
sleMlsQosClassMapMatchIp6Precedence
Integer32,
sleMlsQosClassMapMatchTcpSrcPort
OCTET STRING,
sleMlsQosClassMapMatchTcpDstPort
OCTET STRING,
sleMlsQosClassMapMatchTcpSrcPortRange
OCTET STRING,
sleMlsQosClassMapMatchTcpDstPortRange
OCTET STRING,
sleMlsQosClassMapMatchUdpSrcPort
OCTET STRING,
sleMlsQosClassMapMatchUdpDstPort
OCTET STRING,
sleMlsQosClassMapMatchUdpSrcPortRange
OCTET STRING,
sleMlsQosClassMapMatchUdpDstPortRange
OCTET STRING,
sleMlsQosClassMapMatchSrcMacAddr
OCTET STRING,
sleMlsQosClassMapMatchSrcMacMask
OCTET STRING,
sleMlsQosClassMapMatchDstMacAddr
OCTET STRING,
sleMlsQosClassMapMatchDstMacMask
OCTET STRING,
sleMlsQosClassMapMatchVlanId
OCTET STRING,
sleMlsQosClassMapMatchVlanIdRange
OCTET STRING,
sleMlsQosClassMapMatchInnerVlanId
Integer32,
sleMlsQosClassMapMatchVlanTpid
OCTET STRING,
sleMlsQosClassMapMatchAccessGroup
OCTET STRING,
sleMlsQosClassMapMatchLayer4SrcPort
OCTET STRING,
sleMlsQosClassMapMatchLayer4DstPort
OCTET STRING,
sleMlsQosClassMapMatchLayer4SrcPortRange
OCTET STRING,
sleMlsQosClassMapMatchLayer4DstPortRange
OCTET STRING,
sleMplsQosClassMapMatchCriteria
INTEGER
}
sleMlsQosClassMapName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the table. Class Map name"
::= { sleMlsQosClassMapEntry 1 }
sleMlsQosClassMapMatchCosValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Cos value"
::= { sleMlsQosClassMapEntry 2 }
sleMlsQosClassMapMatchInnerCosValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Inner Cos value"
::= { sleMlsQosClassMapEntry 3 }
sleMlsQosClassMapMatchEgressInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Engress Interface"
::= { sleMlsQosClassMapEntry 4 }
sleMlsQosClassMapMatchEtherType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Eth Type"
::= { sleMlsQosClassMapEntry 5 }
sleMlsQosClassMapMatchSrcIpAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Src Ip Address"
::= { sleMlsQosClassMapEntry 6 }
sleMlsQosClassMapMatchDstIpAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : dst Ip Address"
::= { sleMlsQosClassMapEntry 7 }
sleMlsQosClassMapMatchSrcIpMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Src Ip Mask Length"
::= { sleMlsQosClassMapEntry 8 }
sleMlsQosClassMapMatchDstIpMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Dst Ip Mask Length"
::= { sleMlsQosClassMapEntry 9 }
sleMlsQosClassMapMatchSrcIpV6Addr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Src Ip Address"
::= { sleMlsQosClassMapEntry 10 }
sleMlsQosClassMapMatchDstIpV6Addr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : dst Ip Address"
::= { sleMlsQosClassMapEntry 11 }
sleMlsQosClassMapMatchSrcIpV6MaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Src Ip Mask Length"
::= { sleMlsQosClassMapEntry 12 }
sleMlsQosClassMapMatchDstIpV6MaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Dst Ip Mask Length"
::= { sleMlsQosClassMapEntry 13 }
sleMlsQosClassMapMatchIpDscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : DSCP value"
::= { sleMlsQosClassMapEntry 14 }
sleMlsQosClassMapMatchIpPrecedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Ip Precedence"
::= { sleMlsQosClassMapEntry 15 }
sleMlsQosClassMapMatchIp6Dscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Ip6 DSCP value"
::= { sleMlsQosClassMapEntry 16 }
sleMlsQosClassMapMatchIp6Precedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : ip6 Precedence value"
::= { sleMlsQosClassMapEntry 17 }
sleMlsQosClassMapMatchTcpSrcPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : TCP src Port"
::= { sleMlsQosClassMapEntry 18 }
sleMlsQosClassMapMatchTcpDstPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : TCP Dst Port"
::= { sleMlsQosClassMapEntry 19 }
sleMlsQosClassMapMatchTcpSrcPortRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : TCP src Port Range"
::= { sleMlsQosClassMapEntry 20 }
sleMlsQosClassMapMatchTcpDstPortRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : TCP Dst Port Range"
::= { sleMlsQosClassMapEntry 21 }
sleMlsQosClassMapMatchUdpSrcPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : UDP src Port"
::= { sleMlsQosClassMapEntry 22 }
sleMlsQosClassMapMatchUdpDstPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : UDP Dst Port"
::= { sleMlsQosClassMapEntry 23 }
sleMlsQosClassMapMatchUdpSrcPortRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : UDP src Port"
::= { sleMlsQosClassMapEntry 24 }
sleMlsQosClassMapMatchUdpDstPortRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : UDP Dst Port"
::= { sleMlsQosClassMapEntry 25 }
sleMlsQosClassMapMatchSrcMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Src MAC Addr "
::= { sleMlsQosClassMapEntry 26 }
sleMlsQosClassMapMatchSrcMacMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Src MAC Addr Mask"
::= { sleMlsQosClassMapEntry 27 }
sleMlsQosClassMapMatchDstMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Dst MAC Addr "
::= { sleMlsQosClassMapEntry 28 }
sleMlsQosClassMapMatchDstMacMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Dst MAC Addr Mask"
::= { sleMlsQosClassMapEntry 29 }
sleMlsQosClassMapMatchVlanId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Vlan Id"
::= { sleMlsQosClassMapEntry 30 }
sleMlsQosClassMapMatchVlanIdRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Vlan Id Range"
::= { sleMlsQosClassMapEntry 31 }
sleMlsQosClassMapMatchInnerVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Inner Vlan Id "
::= { sleMlsQosClassMapEntry 32 }
sleMlsQosClassMapMatchVlanTpid OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Vlan TPID"
::= { sleMlsQosClassMapEntry 33 }
sleMlsQosClassMapMatchAccessGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Acl Name"
::= { sleMlsQosClassMapEntry 34 }
sleMlsQosClassMapMatchLayer4SrcPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Layer4 Any Src Port"
::= { sleMlsQosClassMapEntry 35 }
sleMlsQosClassMapMatchLayer4DstPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Layer4 Any Dst Port"
::= { sleMlsQosClassMapEntry 36 }
sleMlsQosClassMapMatchLayer4SrcPortRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Layer4 Any src Port range"
::= { sleMlsQosClassMapEntry 37 }
sleMlsQosClassMapMatchLayer4DstPortRange OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Match criteria : Layer4 Any Dst Port range"
::= { sleMlsQosClassMapEntry 38 }
sleMplsQosClassMapMatchCriteria OBJECT-TYPE
SYNTAX INTEGER
{
noMatch(0),
matchAll(1),
matchAny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the
Class map match criteria, to map the matchAll or MatchAny
for HQS."
::= { sleMlsQosClassMapEntry 39 }
sleMlsQosClassMapControl OBJECT IDENTIFIER ::= { sleMlsQosClassMap 2 }
sleMlsQosClassMapControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createClassMap(1),
deleteClassMap(2),
setClassMapMatch(3),
unSetClassMapMatch(4),
setClassMapMatchRange(5),
unSetClassMapMatchRange(6),
setClassMapMatchEtherType(7),
unSetClassMapMatchEtherType(8),
setClassMapMatchIpAddr(9),
unSetClassMapMatchIpAddr(10),
setClassMapMatchMac(11),
unSetClassMapMatchMac(12),
setClassMapMatchVlanTpid(13),
unSetClassMapMatchVlanTpid(14),
setClassMapMatchAccessGroup(15),
unSetClassMapMatchAccessGroup(16),
setClassMapMatchEgressIntf(17),
unSetClassMapMatchEgressIntf(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure functions via setting this entry as proper value."
::= { sleMlsQosClassMapControl 1 }
sleMlsQosClassMapControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosClassMapControl 2 }
sleMlsQosClassMapControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosClassMapControl 3 }
sleMlsQosClassMapontrolTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosClassMapControl 4 }
sleMlsQosClassMapControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosClassMapControl 5 }
sleMlsQosClassMapCtrlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class Map name"
::= { sleMlsQosClassMapControl 6 }
sleMlsQosClassMapCtrlMatchType OBJECT-TYPE
SYNTAX ClassMapMatchType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class Map Type
cos (1) ,
innerCos(2),
ipDscp (3),
ipPrecedence (4),
ip6Dscp (5),
ip6Precedence (6),
tcpSrcPort (7),
tcpDstPort (8),
udpSrcPort (9),
udpDstPort (10),
VlanId (11),
innerVlanId (12),
layer4SrcPort (13),
layer4DstPort (14)"
::= { sleMlsQosClassMapControl 7 }
sleMlsQosClassMapCtrlMatchVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class Map match Value"
::= { sleMlsQosClassMapControl 8 }
sleMlsQosClassMapCtrlMatchRangeType OBJECT-TYPE
SYNTAX ClassMapMatchRangeType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class Map Type
tcpSrcPort (1),
tcpDstPort (2),
udpSrcPort (3),
udpDstPort (4),
VlanId (5),
layer4SrcPort (6),
layer4DstPort (7)"
::= { sleMlsQosClassMapControl 9 }
sleMlsQosClassMapCtrlMatchRangeLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class Map match Value: Low"
::= { sleMlsQosClassMapControl 10 }
sleMlsQosClassMapCtrlMatchRangeHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class Map match Value : High"
::= { sleMlsQosClassMapControl 11 }
sleMlsQosClassMapCtrlMatchEtherType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : Eth Type"
::= { sleMlsQosClassMapControl 12 }
sleMlsQosClassMapCtrlMatchSrcType OBJECT-TYPE
SYNTAX INTEGER
{
ipv4(1),
ipv6(2),
mac(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class Map Src Type
1. IPv4
2. IPv6
3. Mac"
::= { sleMlsQosClassMapControl 13 }
sleMlsQosClassMapCtrlMatchSrcAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : Src Address.
It can be IPV4 / IPV6 / MAC"
::= { sleMlsQosClassMapControl 14 }
sleMlsQosClassMapCtrlMatchDstAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : dst Ip Address
it can be IPV4 / IPV6 / MAC"
::= { sleMlsQosClassMapControl 15 }
sleMlsQosClassMapCtrlMatchSrcIpMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : Src Ip Mask Length"
::= { sleMlsQosClassMapControl 16 }
sleMlsQosClassMapCtrlMatchDstIpMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : Dst Ip Mask Length"
::= { sleMlsQosClassMapControl 17 }
sleMlsQosClassMapCtrlMatchSrcMacMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : Src MAC Addr Mask"
::= { sleMlsQosClassMapControl 18 }
sleMlsQosClassMapCtrlMatchDstMacMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : Dst MAC Addr Mask"
::= { sleMlsQosClassMapControl 19 }
sleMlsQosClassMapCtrlMatchAcessGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : ACL Group List"
::= { sleMlsQosClassMapControl 20 }
sleMlsQosClassMapCtrlMatchVlanTpid OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : vlan TDID"
::= { sleMlsQosClassMapControl 21 }
sleMlsQosClassMapCtrlMatchEgressInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Match criteria : egress interface.
This can be CPU, interface Name, Vlan Interface"
::= { sleMlsQosClassMapControl 22 }
sleMplsQosClassMapCtrlMatchCriteria OBJECT-TYPE
SYNTAX INTEGER
{
matchAll(1),
matchAny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the
Class map match criteria, to map the matchAll or MatchAny
for HQS."
::= { sleMlsQosClassMapControl 23 }
sleMlsQosClassMapNotification OBJECT IDENTIFIER ::= { sleMlsQosClassMap 3 }
sleMlsQosPolicyMap OBJECT IDENTIFIER ::= { sleMlsQos 5 }
sleMlsQosPolicyMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMlsQosPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { sleMlsQosPolicyMap 1 }
sleMlsQosPolicyMapEntry OBJECT-TYPE
SYNTAX SleMlsQosPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { sleMlsQosPmapName, sleMlsQosPmapClassName }
::= { sleMlsQosPolicyMapTable 1 }
SleMlsQosPolicyMapEntry ::=
SEQUENCE {
sleMlsQosPmapName
OCTET STRING,
sleMlsQosPmapClassName
OCTET STRING,
sleMlsQosPmapClassMatchPriority
PmapPriorityType,
sleMlsQosPmapClassOperMode
INTEGER,
sleMlsQosPmapClassPoliceType
PmapPoliceType,
sleMlsQosPmapClassPoliceCIR
Integer32,
sleMlsQosPmapClassPolicePIR
Integer32,
sleMlsQosPmapClassPoliceCBS
Integer32,
sleMlsQosPmapClassPoliceEBS
Integer32,
sleMlsQosPmapClassPoliceExdAction
PmapExceedActionType,
sleMlsQosPmapClassPoliceExdActionCos
Integer32,
sleMlsQosPmapClassPoliceExdActionDscp
Integer32,
sleMlsQosPmapClassPoliceExdActionTos
Integer32,
sleMlsQosPmapClassPoliceExdActionViolateAction
PmapViolateActionType,
sleMlsQosPmapClassPoliceExdActionViolateValue
Integer32,
sleMlsQosPmapClassPoliceAggregateName
OCTET STRING,
sleMlsQosPmapClassSetActionDeny
Integer32,
sleMlsQosPmapClassSetActionCos
Integer32,
sleMlsQosPmapClassSetActionCpuCos
Integer32,
sleMlsQosPmapClassSetActionIpDscp
Integer32,
sleMlsQosPmapClassSetActionIp6Dscp
Integer32,
sleMlsQosPmapClassSetActionIpPrecedence
Integer32,
sleMlsQosPmapClassSetActionIp6Precedence
Integer32,
sleMlsQosPmapClassSetActionMirrorToPortVal
OCTET STRING,
sleMlsQosPmapClassSetActionRedirectToPortVal
OCTET STRING,
sleMlsQosPmapClassSetActionVlanId
Integer32,
sleMlsQosPmapClassSetActionVlanCos
Integer32,
sleMlsQosPmapClassSetActionQosGroup
INTEGER,
sleMplsQosPmapClassSetActionQueue
INTEGER,
sleMplsQosPmapClassSetActionCopyCpu
INTEGER
}
sleMlsQosPmapName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Policy Map name"
::= { sleMlsQosPolicyMapEntry 1 }
sleMlsQosPmapClassName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class map Name"
::= { sleMlsQosPolicyMapEntry 2 }
sleMlsQosPmapClassMatchPriority OBJECT-TYPE
SYNTAX PmapPriorityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Priority
low(0)
medium(1)
high(2)
highest(3)"
::= { sleMlsQosPolicyMapEntry 3 }
sleMlsQosPmapClassOperMode OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
allow(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Operation Mode"
::= { sleMlsQosPolicyMapEntry 4 }
sleMlsQosPmapClassPoliceType OBJECT-TYPE
SYNTAX PmapPoliceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Police Type
srtcm(1)
trtcm(2)"
::= { sleMlsQosPolicyMapEntry 5 }
sleMlsQosPmapClassPoliceCIR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Police CIR (committed ingress rate) value"
::= { sleMlsQosPolicyMapEntry 6 }
sleMlsQosPmapClassPolicePIR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Police PIR (peak ingress rate) value"
::= { sleMlsQosPolicyMapEntry 7 }
sleMlsQosPmapClassPoliceCBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Police CBS (committed burst size) value"
::= { sleMlsQosPolicyMapEntry 8 }
sleMlsQosPmapClassPoliceEBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Police EBS (Excess burst size) value"
::= { sleMlsQosPolicyMapEntry 9 }
sleMlsQosPmapClassPoliceExdAction OBJECT-TYPE
SYNTAX PmapExceedActionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Exceed Action Type
none (0)
drop (1)
set-dscp-transmit (2)
set-tos-transmit (3)
set-cos-transmit (4)
transmit (7)"
::= { sleMlsQosPolicyMapEntry 10 }
sleMlsQosPmapClassPoliceExdActionCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Exceed Action COS"
::= { sleMlsQosPolicyMapEntry 11 }
sleMlsQosPmapClassPoliceExdActionDscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Exceed Action DSCP"
::= { sleMlsQosPolicyMapEntry 12 }
sleMlsQosPmapClassPoliceExdActionTos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Exceed Action TOS"
::= { sleMlsQosPolicyMapEntry 13 }
sleMlsQosPmapClassPoliceExdActionViolateAction OBJECT-TYPE
SYNTAX PmapViolateActionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Violate Action Type
none(0)
drop(1)
set-dscp-transmit(2)
set-cos-transmit(3)
set-tos-transmit(4)
transmit(5)"
::= { sleMlsQosPolicyMapEntry 14 }
sleMlsQosPmapClassPoliceExdActionViolateValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Violate Action Value"
::= { sleMlsQosPolicyMapEntry 15 }
sleMlsQosPmapClassPoliceAggregateName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Agrregate Police name: "
::= { sleMlsQosPolicyMapEntry 16 }
sleMlsQosPmapClassSetActionDeny OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Action Type: deny"
::= { sleMlsQosPolicyMapEntry 17 }
sleMlsQosPmapClassSetActionCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Cos value "
::= { sleMlsQosPolicyMapEntry 18 }
sleMlsQosPmapClassSetActionCpuCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" cpy Cos value. "
::= { sleMlsQosPolicyMapEntry 19 }
sleMlsQosPmapClassSetActionIpDscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Ip DSCP value ."
::= { sleMlsQosPolicyMapEntry 20 }
sleMlsQosPmapClassSetActionIp6Dscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Ip6 DSCP value to be set."
::= { sleMlsQosPolicyMapEntry 21 }
sleMlsQosPmapClassSetActionIpPrecedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Ip precedence value to be set."
::= { sleMlsQosPolicyMapEntry 22 }
sleMlsQosPmapClassSetActionIp6Precedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Ip6 precedence value to be set."
::= { sleMlsQosPolicyMapEntry 23 }
sleMlsQosPmapClassSetActionMirrorToPortVal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Mirror to Port value."
::= { sleMlsQosPolicyMapEntry 24 }
sleMlsQosPmapClassSetActionRedirectToPortVal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" redirect to Port value."
::= { sleMlsQosPolicyMapEntry 25 }
sleMlsQosPmapClassSetActionVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Vlan Id value."
::= { sleMlsQosPolicyMapEntry 26 }
sleMlsQosPmapClassSetActionVlanCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Vlan COS value"
::= { sleMlsQosPolicyMapEntry 27 }
sleMlsQosPmapClassSetActionQosGroup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Heirarchical qos policy-map qos-group.
Max range is 1 to 2000."
::= { sleMlsQosPolicyMapEntry 28 }
sleMplsQosPmapClassSetActionQueue OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal Queue Priority."
::= { sleMlsQosPolicyMapEntry 29 }
sleMplsQosPmapClassSetActionCopyCpu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Copy to CPU."
::= { sleMlsQosPolicyMapEntry 30 }
sleMlsQosPolicyMapControl OBJECT IDENTIFIER ::= { sleMlsQosPolicyMap 2 }
sleMlsQosPolicyMapControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createPolicyMapClass(1),
deletePolicyMapClass(2),
setPolicyMapClassMatchPriority(3),
setPolicyMapClassOperMode(4),
unSetPolicyMapClassOperMode(5),
setPolicyMapClassPolicer(6),
unSetPolicyMapClassPolicer(7),
setPolicyMapClassPolicerAggregate(8),
unSetPolicyMapClassPolicerAggregate(9),
setPolicyMapClassSet(10),
unSetPolicyMapClassSet(11),
deletePolicyMap(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure functions via setting this entry as proper value."
::= { sleMlsQosPolicyMapControl 1 }
sleMlsQosPolicyMapControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosPolicyMapControl 2 }
sleMlsQosPolicyMapControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosPolicyMapControl 3 }
sleMlsQosPolicyMapontrolTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosPolicyMapControl 4 }
sleMlsQosPolicyMapControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosPolicyMapControl 5 }
sleMlsQosPolicyMapCtrlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index for the table. Class Map name"
::= { sleMlsQosPolicyMapControl 6 }
sleMlsQosPolicyMapCtrlClassName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Name"
::= { sleMlsQosPolicyMapControl 7 }
sleMlsQosPolicyMapCtrlClassMatchPriority OBJECT-TYPE
SYNTAX PmapPriorityType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Priority
low(0)
medium(1)
high(2)
highest(3)"
::= { sleMlsQosPolicyMapControl 8 }
sleMlsQosPolicyMapCtrlClassOperMode OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
allow(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Operation Mode"
::= { sleMlsQosPolicyMapControl 9 }
sleMlsQosPolicyMapCtrlClassPoliceType OBJECT-TYPE
SYNTAX PmapPoliceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Police Type
srtcm(1)
trtcm(2)"
::= { sleMlsQosPolicyMapControl 10 }
sleMlsQosPolicyMapCtrlClassPoliceCIR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Police CIR (committed ingress rate) value"
::= { sleMlsQosPolicyMapControl 11 }
sleMlsQosPolicyMapCtrlClassPolicePIR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Police PIR (Peak ingress rate) value"
::= { sleMlsQosPolicyMapControl 12 }
sleMlsQosPolicyMapCtrlClassPoliceCBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Police CBS (Committed Burst size) value"
::= { sleMlsQosPolicyMapControl 13 }
sleMlsQosPolicyMapCtrlClassPoliceEBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Police EBS (Excess Burst size) value"
::= { sleMlsQosPolicyMapControl 14 }
sleMlsQosPolicyMapCtrlClassPoliceExdAction OBJECT-TYPE
SYNTAX PmapExceedActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Exceed Action Type
none (0)
drop (1)
set-dscp-transmit (2)
set-tos-transmit (3)
set-cos-transmit (4)
transmit (7)"
::= { sleMlsQosPolicyMapControl 15 }
sleMlsQosPolicyMapCtrlClassPoliceExdActionCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exceed Action COS"
::= { sleMlsQosPolicyMapControl 16 }
sleMlsQosPolicyMapCtrlClassPoliceExdActionDscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exceed Action DSCP"
::= { sleMlsQosPolicyMapControl 17 }
sleMlsQosPolicyMapCtrlClassPoliceExdActionTos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exceed Action TOS"
::= { sleMlsQosPolicyMapControl 18 }
sleMlsQosPolicyMapCtrlClassPoliceExdActionViolateAction OBJECT-TYPE
SYNTAX PmapViolateActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exceed Action Violate
none(0)
drop(1)
set-dscp-transmit(2)
set-cos-transmit(3)
set-tos-transmit(4)
transmit(5)"
::= { sleMlsQosPolicyMapControl 19 }
sleMlsQosPolicyMapCtrlClassPoliceExdActionViolateValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exceed Action Violate Value"
::= { sleMlsQosPolicyMapControl 20 }
sleMlsQosPolicyMapCtrlClassPoliceAggregateName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aggregate Policy name: this is configured via sleMlsQosAggPoliceTable"
::= { sleMlsQosPolicyMapControl 21 }
sleMlsQosPolicyMapCtrlClassSetAction OBJECT-TYPE
SYNTAX PmapSetActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Action Types:
cos (1),
cpu-cos (2),
ip-dscp (3),
ip-precedence (4),
redirect-to-port (5),
mirror-to-port (6),
vlan (7),
ip6-dscp (8),
ip6-precedence (9),
cpu-copy (10),
deny (11),
qos-group(12),
none(13),
queue(14),
vlan-cos(15)"
::= { sleMlsQosPolicyMapControl 22 }
sleMlsQosPolicyMapCtrlClassSetActionCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Cos value to be set.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To set this value, sleMlsQosPolicyMapCtrlClassSetAction should be set as cos"
::= { sleMlsQosPolicyMapControl 23 }
sleMlsQosPolicyMapCtrlClassSetActionCpuCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" cpy Cos value to be set.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To set this value, sleMlsQosPolicyMapCtrlClassSetAction should be set as cpu-cos"
::= { sleMlsQosPolicyMapControl 24 }
sleMlsQosPolicyMapCtrlClassSetActionIpDscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Ip DSCP value to be set.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To set this value, sleMlsQosPolicyMapCtrlClassSetAction should be set as ip-dscp"
::= { sleMlsQosPolicyMapControl 25 }
sleMlsQosPolicyMapCtrlClassSetActionIp6Dscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ip6 DSCP value to be set.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To set this value, sleMlsQosPolicyMapCtrlClassSetAction should be set as ip6-dscp"
::= { sleMlsQosPolicyMapControl 26 }
sleMlsQosPolicyMapCtrlClassSetActionIpPrecedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Ip precedence value to be set.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To set this value, sleMlsQosPolicyMapCtrlClassSetAction should be set as ip-precedence"
::= { sleMlsQosPolicyMapControl 27 }
sleMlsQosPolicyMapCtrlClassSetActionIp6Precedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ip6 precedence value to be set.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To set this value, sleMlsQosPolicyMapCtrlClassSetAction should be set as ip6-precedence"
::= { sleMlsQosPolicyMapControl 28 }
sleMlsQosPolicyMapCtrlClassSetActionMirrorToPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Mirror to Port value.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To setthis value, sleMlsQosPolicyMapCtrlClassSetAction should be set as mirror-to-port"
::= { sleMlsQosPolicyMapControl 29 }
sleMlsQosPolicyMapCtrlClassSetActionRedirectToPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" redirect to Port value.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To setthis value, sleMlsQosPolicyMapCtrlClassSetAction should be set as redirect-to-port"
::= { sleMlsQosPolicyMapControl 30 }
sleMlsQosPolicyMapCtrlClassSetActionVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Vlan Id value.
This object is dependent on sleMlsQosPolicyMapCtrlClassSetAction.
To set this value, sleMlsQosPolicyMapCtrlClassSetAction should be set as vlan"
::= { sleMlsQosPolicyMapControl 31 }
sleMlsQosPolicyMapCtrlClassSetActionVlanCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Vlan COS value"
::= { sleMlsQosPolicyMapControl 32 }
sleMlsQosPolicyMapCtrlClassSetActionQosGroup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Heirarchical qos policy-map qos-group.
Max range is 1 to 2000."
::= { sleMlsQosPolicyMapControl 33 }
sleMlsQosPolicyMapCtrlClassSetActionQueue OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Internal Queue Priority."
::= { sleMlsQosPolicyMapControl 34 }
sleMlsQosInterface OBJECT IDENTIFIER ::= { sleMlsQos 6 }
sleMlsQosInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMlsQosInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface table"
::= { sleMlsQosInterface 1 }
sleMlsQosInterfaceEntry OBJECT-TYPE
SYNTAX SleMlsQosInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { sleMlsQosInterfaceIndex }
::= { sleMlsQosInterfaceTable 1 }
SleMlsQosInterfaceEntry ::=
SEQUENCE {
sleMlsQosInterfaceIndex
Integer32,
sleMlsQosInterfaceName
OCTET STRING,
sleMlsQosInterfaceTrustState
MlsQosIntfTrustState,
sleMlsQosInterfaceCos
Integer32,
sleMlsQosInterfaceCosOverride
Integer32,
sleMlsQosInterfaceCosToCos
OCTET STRING,
sleMlsQosInterfaceCosToQueue
OCTET STRING,
sleMlsQosInterfaceDscp
Integer32,
sleMlsQosInterfaceDscpToDscp
OCTET STRING,
sleMlsQosInterfaceDscpToQueue
OCTET STRING,
sleMlsQosInterfaceExpToExp
OCTET STRING,
sleMlsQosInterfaceTrafficShapeRate
Integer32,
sleMlsQosInterfaceTrafficShapeBurst
Integer32,
sleMlsQosInterfaceInputPolicyMap
OCTET STRING,
sleMlsQosInterfaceOutputPolicyMap
OCTET STRING,
sleMlsQosInterfaceTrustPassthroughCos
Integer32,
sleMlsQosInterfaceTrustPassthroughDscp
Integer32,
sleHQosInterfaceCosToClass
OCTET STRING,
sleHQosInterfaceDscpToClass
OCTET STRING,
sleHQosInterfaceReplace
INTEGER,
sleMlsQosInterfaceTrafficIfgExclude
Integer32,
sleMlsQosInterfaceTrafficPolicingRate
Integer32,
sleMlsQosInterfaceTrafficPolicingBurst
Integer32
}
sleMlsQosInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Index is based on Max entries i.e. 64 (dscp)"
::= { sleMlsQosInterfaceEntry 1 }
sleMlsQosInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for the table. Interface Name"
::= { sleMlsQosInterfaceEntry 2 }
sleMlsQosInterfaceTrustState OBJECT-TYPE
SYNTAX MlsQosIntfTrustState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Interface trust state
none (0)
cos (1)
dscp (2)"
::= { sleMlsQosInterfaceEntry 3 }
sleMlsQosInterfaceCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Cos value"
::= { sleMlsQosInterfaceEntry 4 }
sleMlsQosInterfaceCosOverride OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Cos override value"
::= { sleMlsQosInterfaceEntry 5 }
sleMlsQosInterfaceCosToCos OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Cos to cos mapping"
::= { sleMlsQosInterfaceEntry 6 }
sleMlsQosInterfaceCosToQueue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Cos to queue mapping"
::= { sleMlsQosInterfaceEntry 7 }
sleMlsQosInterfaceDscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface DSCP values"
::= { sleMlsQosInterfaceEntry 8 }
sleMlsQosInterfaceDscpToDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface dscp to dscp mapping"
::= { sleMlsQosInterfaceEntry 9 }
sleMlsQosInterfaceDscpToQueue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface dscp to queue mapping"
::= { sleMlsQosInterfaceEntry 10 }
sleMlsQosInterfaceExpToExp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface exp to exp mapping"
::= { sleMlsQosInterfaceEntry 11 }
sleMlsQosInterfaceTrafficShapeRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Traffic Shaping rate"
::= { sleMlsQosInterfaceEntry 12 }
sleMlsQosInterfaceTrafficShapeBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface traffic shaping burst"
::= { sleMlsQosInterfaceEntry 13 }
sleMlsQosInterfaceInputPolicyMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface policy map mapping"
::= { sleMlsQosInterfaceEntry 14 }
sleMlsQosInterfaceOutputPolicyMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { sleMlsQosInterfaceEntry 15 }
sleMlsQosInterfaceTrustPassthroughCos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface trust pass-through COS enabled"
::= { sleMlsQosInterfaceEntry 16 }
sleMlsQosInterfaceTrustPassthroughDscp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface trust pass-through DSCP enabled"
::= { sleMlsQosInterfaceEntry 17 }
sleHQosInterfaceCosToClass OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface cos to class mapping in no truct mode
It represnet COS <VALUE> - CNG <VALUE> - CLASS <VALUE>"
::= { sleMlsQosInterfaceEntry 18 }
sleHQosInterfaceDscpToClass OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface dscp to class mapping in no truct mode
It represnet DSCP <VALUE> - CLASS <VALUE>"
::= { sleMlsQosInterfaceEntry 19 }
sleHQosInterfaceReplace OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
cos(1),
dscp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To rewite the dscp/cos at egress in uniform mode."
::= { sleMlsQosInterfaceEntry 20 }
sleMlsQosInterfaceTrafficIfgExclude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface traffic IFG exclude
0 - No
1 - Yes"
::= { sleMlsQosInterfaceEntry 21 }
sleMlsQosInterfaceTrafficPolicingRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface traffic policing rate
<8-1000000> in kbps "
::= { sleMlsQosInterfaceEntry 22 }
sleMlsQosInterfaceTrafficPolicingBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface traffic policing burst
<2-2000> "
::= { sleMlsQosInterfaceEntry 23 }
sleMlsQosInterfaceControl OBJECT IDENTIFIER ::= { sleMlsQosInterface 2 }
sleMlsQosInterfaceControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setInterfaceQosMapping(1),
unSetInterfaceQosMapping(2),
setInterfaceTrafficShaping(3),
unSetInterfaceTrafficShaping(4),
setInterfaceInputPolicyMap(5),
unSetInterfaceInputPolicyMap(6),
setInterfaceOutputPolicyMap(7),
unSetInterfaceOutputPolicyMap(8),
setInterfaceOveride(9),
unsetInterfaceOveride(10),
setInterfaceReplace(11),
unsetInterfaceReplace(12),
setInterfaceTrafficIfgExclude(13),
unsetInterfaceTrafficIfgExclude(14),
setInterfaceTrafficPolicingDot3x(15),
unsetInterfaceTrafficPolicingDot3x(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure functions via setting this entry as proper value."
::= { sleMlsQosInterfaceControl 1 }
sleMlsQosInterfaceControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosInterfaceControl 2 }
sleMlsQosInterfaceControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosInterfaceControl 3 }
sleMlsQosInterfaceontrolTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosInterfaceControl 4 }
sleMlsQosInterfaceControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosInterfaceControl 5 }
sleMlsQosInterfaceCtrlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Name"
::= { sleMlsQosInterfaceControl 6 }
sleMlsQosInterfaceCtrlMapingType OBJECT-TYPE
SYNTAX MlsQosInterfaceMapingType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Mapping Type:
cos (1) Configure interface default CoS values
cos-cos (2) Specify cos-cos
cos-queue (3) Specify cos-queue map
dscp (4) Set the default DSCP vlaue
dscp-dscp(5) Specify dscp-dscp
dscp-queue (6) DSCP-to-QUEUE
exp-exp(7) Specify exp-exp
trust (8) Configure port trust state
trust-passthrough (9) COnfigure port trust pass-through state
cosToClass (10) configure cos to class
dscpToClass (11) configure dscp to class
"
::= { sleMlsQosInterfaceControl 7 }
sleMlsQosInterfaceCtrlMapingIngVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ingress or incoming mapping values.
Based on sleMlsQosInterfaceCtrlMapingType, this value has to be set.
Ex.
If sleMlsQosInterfaceCtrlMapingType = cosToCos, then
sleMlsQosInterfaceCtrlMapingIngVal = Incoming or ingress COS value"
::= { sleMlsQosInterfaceControl 8 }
sleMlsQosInterfaceCtrlMapingEgrVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress or outgoing mapping values.
Based on sleMlsQosInterfaceCtrlMapingType, this value has to be set.
Ex.
If sleMlsQosInterfaceCtrlMapingType = cosToCos, then
sleMlsQosInterfaceCtrlMapingIngVal = Egress COS value"
::= { sleMlsQosInterfaceControl 9 }
sleMlsQosInterfaceCtrlMapingCosOverride OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface COS override value"
::= { sleMlsQosInterfaceControl 10 }
sleMlsQosInterfaceCtrlMapingTrustState OBJECT-TYPE
SYNTAX MlsQosIntfTrustState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Interface trust state
Trust:
cos (1)
dscp (2)
Trust pass-through:
pass-through cos (1)
pass-through dscp (2)"
::= { sleMlsQosInterfaceControl 11 }
sleMlsQosInterfaceCtrlTrafficShapeRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Traffic shape rate"
::= { sleMlsQosInterfaceControl 12 }
sleMlsQosInterfaceCtrlTrafficShapeBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Traffic shape burst"
::= { sleMlsQosInterfaceControl 13 }
sleMlsQosInterfaceCtrlInputPolicyMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Policy Map mapping"
::= { sleMlsQosInterfaceControl 14 }
sleMlsQosInterfaceCtrlOutputPolicyMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { sleMlsQosInterfaceControl 15 }
sleMlsQosInterfaceCtrlMapingCNGValue OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify CNG value <0-1>"
::= { sleMlsQosInterfaceControl 16 }
sleMlsQosInterfaceCtrlMapingEgrClassVal OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { sleMlsQosInterfaceControl 17 }
sleMlsQosInterfaceCtrlReplace OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
cos(1),
dscp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"rewite the dscp/cos at egress in uniform mode."
::= { sleMlsQosInterfaceControl 18 }
sleMlsQosIntfQue OBJECT IDENTIFIER ::= { sleMlsQos 7 }
sleMlsQosIntfQueTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMlsQosIntfQueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { sleMlsQosIntfQue 1 }
sleMlsQosIntfQueEntry OBJECT-TYPE
SYNTAX SleMlsQosIntfQueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { sleMlsQosIntfQueIntfIndex, sleMlsQosIntfQueId }
::= { sleMlsQosIntfQueTable 1 }
SleMlsQosIntfQueEntry ::=
SEQUENCE {
sleMlsQosIntfQueIntfIndex
Integer32,
sleMlsQosIntfQueId
Integer32,
sleMlsQosIntfQueShapeQueueRate
Integer32,
sleMlsQosIntfQueWrrQueueWeight
Integer32,
sleMlsQosIntfQueWrrRandomDetectMinThr
Integer32,
sleMlsQosIntfQueWrrRandomDetectMaxThr
Integer32,
sleMlsQosIntfQueWrrRandomDetectExpWt
Integer32,
sleMlsQosIntfQueTailDropThr
Integer32,
sleMlsQosIntfQueStrictQueue
Integer32,
sleMlsQosIntfQueRandomDetectDropStart
Integer32,
sleMlsQosIntfQueRandomDetectDropSlope
Integer32,
sleMlsQosIntfQueRandomDetectColor
INTEGER,
sleMlsQosIntfQueReservedBandwidth
Integer32
}
sleMlsQosIntfQueIntfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Index is based on no of Queues"
::= { sleMlsQosIntfQueEntry 1 }
sleMlsQosIntfQueId OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Index is based on no of Queues"
::= { sleMlsQosIntfQueEntry 2 }
sleMlsQosIntfQueShapeQueueRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Queue Shape rate"
::= { sleMlsQosIntfQueEntry 3 }
sleMlsQosIntfQueWrrQueueWeight OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Queue WRR queue weight"
::= { sleMlsQosIntfQueEntry 4 }
sleMlsQosIntfQueWrrRandomDetectMinThr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Queue WRR random detect min threshold"
::= { sleMlsQosIntfQueEntry 5 }
sleMlsQosIntfQueWrrRandomDetectMaxThr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Queue WRR random detect max threshold"
::= { sleMlsQosIntfQueEntry 6 }
sleMlsQosIntfQueWrrRandomDetectExpWt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Queue WRR random detect exp weight"
::= { sleMlsQosIntfQueEntry 7 }
sleMlsQosIntfQueTailDropThr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Queue TailDrop threshold"
::= { sleMlsQosIntfQueEntry 8 }
sleMlsQosIntfQueStrictQueue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Strict Queue Config"
::= { sleMlsQosIntfQueEntry 9 }
sleMlsQosIntfQueRandomDetectDropStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WRR Random Detect Drop Start"
::= { sleMlsQosIntfQueEntry 10 }
sleMlsQosIntfQueRandomDetectDropSlope OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WRR Random Detect Drop Slope"
::= { sleMlsQosIntfQueEntry 11 }
sleMlsQosIntfQueRandomDetectColor OBJECT-TYPE
SYNTAX INTEGER
{
yellow(1),
red(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WRR Random Detect Color"
::= { sleMlsQosIntfQueEntry 12 }
sleMlsQosIntfQueReservedBandwidth OBJECT-TYPE
SYNTAX Integer32 (8..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Queue Shape rate (minimum)"
::= { sleMlsQosIntfQueEntry 13 }
sleMlsQosIntfQueControl OBJECT IDENTIFIER ::= { sleMlsQosIntfQue 2 }
sleMlsQosIntfQueControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setQueueProfile(1),
unSetQueueProfile(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure functions via setting this entry as proper value."
::= { sleMlsQosIntfQueControl 1 }
sleMlsQosIntfQueControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosIntfQueControl 2 }
sleMlsQosIntfQueControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosIntfQueControl 3 }
sleMlsQosIntfQueontrolTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosIntfQueControl 4 }
sleMlsQosIntfQueControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosIntfQueControl 5 }
sleMlsQosIntfQueCtrlInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue Id"
::= { sleMlsQosIntfQueControl 6 }
sleMlsQosIntfQueCtrlQueueId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue Id"
::= { sleMlsQosIntfQueControl 7 }
sleMlsQosIntfQueCtrlProfileType OBJECT-TYPE
SYNTAX MlsQosIntfQueProfilingType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { sleMlsQosIntfQueControl 8 }
sleMlsQosIntfQueCtrlShapeQueueRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue Rate"
::= { sleMlsQosIntfQueControl 9 }
sleMlsQosIntfQueCtrlWrrQueueWeight OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue WRR Queue weight"
::= { sleMlsQosIntfQueControl 10 }
sleMlsQosIntfQueCtrlWrrRandomDetectMinThr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue WRR random detect Min Threshold"
::= { sleMlsQosIntfQueControl 11 }
sleMlsQosIntfQueCtrlWrrRandomDetectMaxThr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue WRR random detect Max Threshold"
::= { sleMlsQosIntfQueControl 12 }
sleMlsQosIntfQueCtrlWrrRandomDetectExpWt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue WRR random detect exp weight"
::= { sleMlsQosIntfQueControl 13 }
sleMlsQosIntfQueCtrlTailDropThr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue Taildrop Threshold"
::= { sleMlsQosIntfQueControl 14 }
sleMlsQosIntfQueCtrlRandomDetectDropStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue WRR Random Detect Drop Start"
::= { sleMlsQosIntfQueControl 15 }
sleMlsQosIntfQueCtrlRandomDetectDropSlope OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue WRR Random Detect Drop Slope"
::= { sleMlsQosIntfQueControl 16 }
sleMlsQosIntfQueCtrlRandomDetectColor OBJECT-TYPE
SYNTAX INTEGER
{
yellow(1),
red(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue WRR Random Detect Color"
::= { sleMlsQosIntfQueControl 17 }
sleMlsQosIntfQueCtrlReservedBandwidth OBJECT-TYPE
SYNTAX Integer32 (8..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Queue Rate(minimum)"
::= { sleMlsQosIntfQueControl 18 }
sleMlsQosQStats OBJECT IDENTIFIER ::= { sleMlsQos 8 }
sleMlsQosQStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMlsQosQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { sleMlsQosQStats 1 }
sleMlsQosQStatsEntry OBJECT-TYPE
SYNTAX SleMlsQosQStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { sleMlsQosQstatsIfIndex, sleMlsQosQId }
::= { sleMlsQosQStatsTable 1 }
SleMlsQosQStatsEntry ::=
SEQUENCE {
sleMlsQosQstatsIfIndex
Integer32,
sleMlsQosQId
Integer32,
sleMlsQosWredGreenDropPkts
Counter64,
sleMlsQosWredYellowDropPkts
Counter64,
sleMlsQosWredRedDropPkts
Counter64,
sleMlsQosTailDropPkts
Counter64,
sleMlsQosTailDropBytes
Counter64,
sleMlsQosQStatsOutPkts
Counter64,
sleMlsQosQStatsOutBytes
Counter64,
sleMlsQosQStatsMcastOutPkts
Counter64,
sleMlsQosQStatsMcastOutBytes
Counter64,
sleMlsQosQStatsDropPkts
Counter64,
sleMlsQosQStatsDropBytes
Counter64,
sleMlsQosQStatsMcastDropPkts
Counter64,
sleMlsQosQStatsMcastDropBytes
Counter64,
sleMlsQosQStatsEnqueuedPkts
Counter64,
sleMlsQosQStatsEnqueuedBytes
Counter64
}
sleMlsQosQstatsIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the table. QStats Name"
::= { sleMlsQosQStatsEntry 1 }
sleMlsQosQId OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Index is based on Max entries i.e. 64 (dscp)"
::= { sleMlsQosQStatsEntry 2 }
sleMlsQosWredGreenDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wred Green drop packet counter"
::= { sleMlsQosQStatsEntry 3 }
sleMlsQosWredYellowDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wred yellow drop packet counter"
::= { sleMlsQosQStatsEntry 4 }
sleMlsQosWredRedDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wred red drop packet counter"
::= { sleMlsQosQStatsEntry 5 }
sleMlsQosTailDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Taildrop drop packet counter"
::= { sleMlsQosQStatsEntry 6 }
sleMlsQosTailDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Taildrop drop bytes counter"
::= { sleMlsQosQStatsEntry 7 }
sleMlsQosQStatsOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total out packets in the Queue"
::= { sleMlsQosQStatsEntry 8 }
sleMlsQosQStatsOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total out bytes in the Queue"
::= { sleMlsQosQStatsEntry 9 }
sleMlsQosQStatsMcastOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total mcast out packets in the Queue"
::= { sleMlsQosQStatsEntry 10 }
sleMlsQosQStatsMcastOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total mcast out bytes in the Queue"
::= { sleMlsQosQStatsEntry 11 }
sleMlsQosQStatsDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total drop packets in the Queue"
::= { sleMlsQosQStatsEntry 12 }
sleMlsQosQStatsDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total drop bytes in the Queue"
::= { sleMlsQosQStatsEntry 13 }
sleMlsQosQStatsMcastDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total mcast drop packets in the Queue"
::= { sleMlsQosQStatsEntry 14 }
sleMlsQosQStatsMcastDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total mcast drop bytes in the Queue"
::= { sleMlsQosQStatsEntry 15 }
sleMlsQosQStatsEnqueuedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Enqueued packets in the Queue"
::= { sleMlsQosQStatsEntry 16 }
sleMlsQosQStatsEnqueuedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Enqueued bytes in the Queue"
::= { sleMlsQosQStatsEntry 17 }
sleMlsQosQStatsControl OBJECT IDENTIFIER ::= { sleMlsQosQStats 2 }
sleMlsQosQStatsControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
clearWredStats(1),
clearTailDropStats(2),
clearQueueStats(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure functions via setting this entry as proper value."
::= { sleMlsQosQStatsControl 1 }
sleMlsQosQStatsControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosQStatsControl 2 }
sleMlsQosQStatsControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosQStatsControl 3 }
sleMlsQosQStatsontrolTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosQStatsControl 4 }
sleMlsQosQStatsControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosQStatsControl 5 }
sleMlsQosQstatsCtrlIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index for the table. Class Map name"
::= { sleMlsQosQStatsControl 6 }
sleMlsQosQstatsCtrlQId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Class map Name"
::= { sleMlsQosQStatsControl 7 }
sleHqosClassMapQueue OBJECT IDENTIFIER ::= { sleMlsQos 9 }
sleHqosClassMapQueueInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleHqosClassMapQueueInfoEntry
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Table is used to show the information for Class Map queueing Table"
::= { sleHqosClassMapQueue 1 }
sleHqosClassMapQueueInfoEntry OBJECT-TYPE
SYNTAX SleHqosClassMapQueueInfoEntry
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Table is used to show the information for Class Map queueing Table"
INDEX { sleHqosClassMapQueueInfoName }
::= { sleHqosClassMapQueueInfoTable 1 }
SleHqosClassMapQueueInfoEntry ::=
SEQUENCE {
sleHqosClassMapQueueInfoName
OCTET STRING,
sleHqosClassMapQueueInfoMatchGroup
INTEGER
}
sleHqosClassMapQueueInfoName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Class Map queue name.
An unique object identify an entry of this table."
::= { sleHqosClassMapQueueInfoEntry 1 }
sleHqosClassMapQueueInfoMatchGroup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the match group of the class map
queueing."
::= { sleHqosClassMapQueueInfoEntry 2 }
sleHqosClassMapQueueControl OBJECT IDENTIFIER ::= { sleHqosClassMapQueue 2 }
sleHqosClassMapQueueControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createSleHqosClassMapQueueControlEntry(1),
deleteSleHqosClassMapQueueControlEntry(2),
setSleHqosClassMapQueueControlMatchGroup(3),
unsetSleHqosClassMapQueueControlMatchGroup(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure
functions via setting this entry as proper value."
::= { sleHqosClassMapQueueControl 1 }
sleHqosClassMapQueueControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as
.busy. or .idle. before do setRequest."
::= { sleHqosClassMapQueueControl 2 }
sleHqosClassMapQueueControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end.
In case of short-time command, this value is 0"
::= { sleHqosClassMapQueueControl 3 }
sleHqosClassMapQueueControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleHqosClassMapQueueControl 4 }
sleHqosClassMapQueueControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleHqosClassMapQueueControl 5 }
sleHqosClassMapQueueControlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object is used to the set the control name for the
Class map queue Table"
::= { sleHqosClassMapQueueControl 6 }
sleHqosClassMapQueueControlMatchGroup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the match group of the class map queueing"
::= { sleHqosClassMapQueueControl 7 }
sleHqosPolicyMapQueue OBJECT IDENTIFIER ::= { sleMlsQos 10 }
sleHqosPolicyMapQueueInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleHqosPolicyMapQueueInfoEntry
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This table is used to show the Policy mapping queue information
of the policy map queueing"
::= { sleHqosPolicyMapQueue 1 }
sleHqosPolicyMapQueueInfoEntry OBJECT-TYPE
SYNTAX SleHqosPolicyMapQueueInfoEntry
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This table is used to show the Policy mapping queue information of
the policy map queueing"
INDEX { sleHqosPolicyMapQueueInfoName, sleHqosClassMapQueueInfoName }
::= { sleHqosPolicyMapQueueInfoTable 1 }
SleHqosPolicyMapQueueInfoEntry ::=
SEQUENCE {
sleHqosPolicyMapQueueInfoName
OCTET STRING,
sleHqosPolicyMapQueueInfoShape
SnmpAdminString,
sleHqosPolicyMapQueueInfoBandwidth
SnmpAdminString,
sleHqosPolicyMapQueueInfoBandwidthRemainingPercent
INTEGER,
sleHqosPolicyMapQueueInfoQueueLimit
SnmpAdminString,
sleHqosPolicyMapQueueInfoServicePolicyName
SnmpAdminString,
sleHqosPolicyMapQueueInfoPriority
INTEGER,
sleHqosPolicyMapQueueInfoRDMinThreshold
SnmpAdminString,
sleHqosPolicyMapQueueInfoRDMaxThreshold
SnmpAdminString
}
sleHqosPolicyMapQueueInfoName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identify an entry in this table."
::= { sleHqosPolicyMapQueueInfoEntry 1 }
sleHqosPolicyMapQueueInfoShape OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object is used to show the shape for the policy map queue
Types:
1)average 1-1000000000(bps|kbps|mbps|gbps)
2)percent 1-100
"
::= { sleHqosPolicyMapQueueInfoEntry 2 }
sleHqosPolicyMapQueueInfoBandwidth OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the bandwidth for the policy map queue
average 1-1000000000(bps|kbps|mbps|gbps)
percent 1-100
"
::= { sleHqosPolicyMapQueueInfoEntry 3 }
sleHqosPolicyMapQueueInfoBandwidthRemainingPercent OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the remained bandwidth for the policy map queue"
::= { sleHqosPolicyMapQueueInfoEntry 4 }
sleHqosPolicyMapQueueInfoQueueLimit OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the queue limit for the policy map queue"
::= { sleHqosPolicyMapQueueInfoEntry 5 }
sleHqosPolicyMapQueueInfoServicePolicyName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the service name for the policy map queue"
::= { sleHqosPolicyMapQueueInfoEntry 6 }
sleHqosPolicyMapQueueInfoPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the priority for the policy map queue
Always value is 1"
::= { sleHqosPolicyMapQueueInfoEntry 7 }
sleHqosPolicyMapQueueInfoRDMinThreshold OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the random detuct minimum threshold for the
policy map queue"
::= { sleHqosPolicyMapQueueInfoEntry 8 }
sleHqosPolicyMapQueueInfoRDMaxThreshold OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to show the random detuct maximum threshold for the
policy map queue"
::= { sleHqosPolicyMapQueueInfoEntry 9 }
sleHqosPolicyMapQueueControl OBJECT IDENTIFIER ::= { sleHqosPolicyMapQueue 2 }
sleHqosPolicyMapQueueControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createPolicyMapQueueEntry(1),
deletePolicyMapQueueEntry(2),
setPolicyMapQueueParameters(3),
unsetPolicyMapQueueParameters(4),
setPolicyMapQueueServicePolicy(5),
unsetPolicyMapQueueServicePolicy(6),
setPolicyMapQueueRandomDetect(7),
unsetPolicyMapQueueRandomDetect(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the configuration commands, and user can configure
functions via setting this entry as proper value."
::= { sleHqosPolicyMapQueueControl 1 }
sleHqosPolicyMapQueueControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle.
before do setRequest."
::= { sleHqosPolicyMapQueueControl 2 }
sleHqosPolicyMapQueueControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command,
this value is 0"
::= { sleHqosPolicyMapQueueControl 3 }
sleHqosPolicyMapQueueControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleHqosPolicyMapQueueControl 4 }
sleHqosPolicyMapQueueControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleHqosPolicyMapQueueControl 5 }
sleHqosPolicyMapQueueControlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the name for the policy map queue"
::= { sleHqosPolicyMapQueueControl 6 }
sleHqosPolicyMapQueueControlClassMapQueueName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the name for the policy map queue"
::= { sleHqosPolicyMapQueueControl 7 }
sleHqosPolicyMapQueueControlParams OBJECT-TYPE
SYNTAX INTEGER
{
shape(1),
queueLimit(2),
bandwidth(3),
bandwidthRemain(4),
priority(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to set
1)shape: the shape for the policy map queue is to configure shaping on an egress
queue to impose a maximum rate on it
2)queue-limit: the Queue Limit is to configure tail drop by setting queue limits
on both ingress and egress queues
3)bandwidth: To allocate a minimum percentage of the interface bandwidth to a queue
4)bandwidth-Remain: To configures the bandwidth remaining on the interface in a queue
5)Priority: To configure a single output queuing class as the priority queue
average 1-1000000000(bps|kbps|mbps|gbps)
limit 1-131072 (packets | bytes | kbytes)
percent 1-100
"
::= { sleHqosPolicyMapQueueControl 8 }
sleHqosPolicyMapQueueControlParamsValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to set
1)shape: the shape for the policy map queue is to configure shaping on an egress
queue to impose a maximum rate on it
2)queue-limit: the Queue Limit is to configure tail drop by setting queue limits
on both ingress and egress queues
3)bandwidth: To allocate a minimum percentage of the interface bandwidth to a queue
4)bandwidth-Remain: To configures the bandwidth remaining on the interface in a queue
5)Priority: To configure a single output queuing class as the priority queue
average 1-1000000000(bps|kbps|mbps|gbps)
limit 1-131072 (packets | bytes | kbytes)
percent 1-100
"
::= { sleHqosPolicyMapQueueControl 9 }
sleHqosPolicyMapQueueControlUnits OBJECT-TYPE
SYNTAX INTEGER
{
bps(1),
kbps(2),
mbps(3),
gbps(4),
packets(5),
bytes(6),
kbytes(7),
average(8),
percent(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the units for the specified objects "
::= { sleHqosPolicyMapQueueControl 10 }
sleHqosPolicyMapQueueControlRDMiniThreshold OBJECT-TYPE
SYNTAX INTEGER (1..131072)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"his object is used to set the Minimum random threashold"
::= { sleHqosPolicyMapQueueControl 11 }
sleHqosPolicyMapQueueControlRDMaxThreshold OBJECT-TYPE
SYNTAX INTEGER (1..131072)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the Maximum random threashold "
::= { sleHqosPolicyMapQueueControl 12 }
sleHqosPolicyMapQueueControlRDMinimumUnits OBJECT-TYPE
SYNTAX INTEGER
{
bytes(1),
kbytes(2),
packets(3),
percent(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the units for Random Minimum "
::= { sleHqosPolicyMapQueueControl 13 }
sleHqosPolicyMapQueueControlRDMaximumUnits OBJECT-TYPE
SYNTAX INTEGER
{
bytes(1),
kbytes(2),
packets(3),
percent(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the units for Random Maximum"
::= { sleHqosPolicyMapQueueControl 14 }
sleHqosPolicyMapQueueControlServicePolicyName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the service name,
to attach a child policy onto a parent policy
"
::= { sleHqosPolicyMapQueueControl 15 }
sleMlsQosAclGlobal OBJECT IDENTIFIER ::= { sleMlsQos 11 }
sleMlsQosAclGlobalInfo OBJECT IDENTIFIER ::= { sleMlsQosAclGlobal 1 }
sleMlsQosAclGlobalInfoMaxAccessList OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max accessList suported"
::= { sleMlsQosAclGlobalInfo 1 }
sleMlsQosAclGlobalControl OBJECT IDENTIFIER ::= { sleMlsQosAclGlobal 2 }
sleMlsQosAclGlobalControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setMaxAccessList(1),
unsetMaxAccessList(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration commands, and user can configure
functions via setting this entry as proper value."
::= { sleMlsQosAclGlobalControl 1 }
sleMlsQosAclGlobalControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of user command. User have to check this value as .busy. or .idle. before do setRequest."
::= { sleMlsQosAclGlobalControl 2 }
sleMlsQosAclGlobalControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wait-time until setRequest end. In case of short-time command, this value is 0"
::= { sleMlsQosAclGlobalControl 3 }
sleMlsQosAclGlobalControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the time stamp of the last command. (don.t care)"
::= { sleMlsQosAclGlobalControl 4 }
sleMlsQosAclGlobalControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Result of the last command."
::= { sleMlsQosAclGlobalControl 5 }
sleMlsQosAclGlobalControlMaxAccessList OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Max accessList suported"
::= { sleMlsQosAclGlobalControl 6 }
sleMlsQosGroup OBJECT-GROUP
OBJECTS { sleMlsQosStatus, sleMlsQosMapCosToCos, sleMlsQosMapCosToQueue, sleMlsQosMapDscpToDscp, sleMlsQosMapDscpToQueue,
sleMlsQosMapExpToExp, sleMlsQosMapExpToQueue, sleMlsQosMapStrictQueueId, sleMlsQosMapWrrQueueWeight, sleMlsQosMapCpuMaxPpsRate,
sleMlsQosMapCpuQueueWeight, sleMlsQosMapNodeCpuMaxPpsRate, sleMlsQosMapNodeCpuQueueWeight, sleMlsQosMapExpToClass, sleHQosStatistics,
sleQosPhbPriorityColor, sleHQosDefaultClassToDscp, sleQosDefaultCosToClassTrust, sleQosDefaultCosToClassNoTrust, sleQosDefaultDscpToClassTrust,
sleQosDefaultDscpToClassNoTrust, sleMlsQosGlobalControlRequest, sleMlsQosGlobalControlStatus, sleMlsQosGlobalCtrlTimer, sleMlsQosGlobalControlTimeStamp,
sleMlsQosGlobalControlReqResult, sleMlsQosCtrlGlobalStatus, sleMlsQosGlobalControlMappingType, sleMlsQosGlobalControlMappingIngValue, sleMlsQosGlobalControlMappingEgrValue,
sleMlsQosGlobalControlQueueId, sleMlsQosGlobalControlWrrQueueWeight, sleMlsQosGlobalControlCpuMaxPpsRate, sleMlsQosGlobalControlCpuQueueWt, sleMlsQosGlobalControlNodeId,
sleMlsQosGlobalControlMappingEgrClassValue, sleMlsQosAggPoliceIndex, sleMlsQosAggPoliceName, sleMlsQosAggPoliceTrafficRate, sleMlsQosAggPoliceBurstSize,
sleMlsQosAggPoliceCtrlRequest, sleMlsQosAggPoliceCtrlStatus, sleMlsQosAggPoliceConfigCtrlTimer, sleMlsQosAggPoliceCtrlTimeStamp, sleMlsQosAggPoliceCtrlReqResult,
sleMlsQosAggPoliceCtrlName, sleMlsQosAggPoliceCtrlTrafficRate, sleMlsQosAggPoliceCtrlBurstSize, sleMlsQosACLIndex, sleMlsQosACLFilterIndex,
sleMlsQosACLName, sleMlsQosACLMatchType, sleMlsQosACLMatchAction, sleMlsQosACLEtherType, sleMlsQosACLL3Protocol,
sleMlsQosACLSrcIpAddress, sleMlsQosACLDstIpAddress, sleMlsQosACLSrcIpAddrMask, sleMlsQosACLDstIpAddrMask, sleMlsQosACLSrcMacAddress,
sleMlsQosACLDstMacAddress, sleMlsQosACLSrcMacAddrMask, sleMlsQosACLDstMacAddrMask, sleMlsQosACLTcpUdpSrcPortAction, sleMlsQosACLTcpUdpDstPortAction,
sleMlsQosACLTcpUdpSrcPort, sleMlsQosACLTcpUdpDstPort, sleMlsQosACLNameSrcIpExactMatch, sleMlsQosACLActionRemarkDesc, sleMlsQosACLIcmpType,
sleMlsQosACLIcmpCode, sleMlsQosACLTcpUdpSrcPortEnd, sleMlsQosACLTcpUdpDstPortEnd, sleMlsQosACLControlRequest, sleMlsQosACLControlStatus,
sleMlsQosACLConfigControlTimer, sleMlsQosACLControlTimeStamp, sleMlsQosACLControlReqResult, sleMlsQosACLCtrlName, sleMlsQosACLCtrlMatchType,
sleMlsQosACLCtrlMatchAction, sleMlsQosACLCtrlEtherType, sleMlsQosACLCtrlL3Protocol, sleMlsQosACLCtrlSrcAddress, sleMlsQosACLCtrlDstAddress,
sleMlsQosACLCtrlSrcAddrMask, sleMlsQosACLCtrlDstAddrMask, sleMlsQosACLCtrlTcpUdpSrcPortAction, sleMlsQosACLCtrlTcpUdpDstPortAction, sleMlsQosACLCtrlTcpUdpSrcPort,
sleMlsQosACLCtrlTcpUdpDstPort, sleMlsQosACLCtrlAclNameExactMatch, sleMlsQosACLCtrlActionRemarkDesc, sleMlsQosACLCtrlIcmpType, sleMlsQosACLCtrlIcmpCode,
sleMlsQosACLCtrlTcpUdpSrcPortEnd, sleMlsQosACLCtrlTcpUdpDstPortEnd, sleMlsQosClassMapName, sleMlsQosClassMapMatchCosValue, sleMlsQosClassMapMatchInnerCosValue,
sleMlsQosClassMapMatchEgressInterface, sleMlsQosClassMapMatchEtherType, sleMlsQosClassMapMatchSrcIpAddr, sleMlsQosClassMapMatchDstIpAddr, sleMlsQosClassMapMatchSrcIpMaskLen,
sleMlsQosClassMapMatchDstIpMaskLen, sleMlsQosClassMapMatchSrcIpV6Addr, sleMlsQosClassMapMatchDstIpV6Addr, sleMlsQosClassMapMatchSrcIpV6MaskLen, sleMlsQosClassMapMatchDstIpV6MaskLen,
sleMlsQosClassMapMatchIpDscp, sleMlsQosClassMapMatchIpPrecedence, sleMlsQosClassMapMatchIp6Dscp, sleMlsQosClassMapMatchIp6Precedence, sleMlsQosClassMapMatchTcpSrcPort,
sleMlsQosClassMapMatchTcpDstPort, sleMlsQosClassMapMatchTcpSrcPortRange, sleMlsQosClassMapMatchTcpDstPortRange, sleMlsQosClassMapMatchUdpSrcPort, sleMlsQosClassMapMatchUdpDstPort,
sleMlsQosClassMapMatchUdpSrcPortRange, sleMlsQosClassMapMatchUdpDstPortRange, sleMlsQosClassMapMatchSrcMacAddr, sleMlsQosClassMapMatchSrcMacMask, sleMlsQosClassMapMatchDstMacAddr,
sleMlsQosClassMapMatchDstMacMask, sleMlsQosClassMapMatchVlanId, sleMlsQosClassMapMatchVlanIdRange, sleMlsQosClassMapMatchInnerVlanId, sleMlsQosClassMapMatchVlanTpid,
sleMlsQosClassMapMatchAccessGroup, sleMlsQosClassMapMatchLayer4SrcPort, sleMlsQosClassMapMatchLayer4DstPort, sleMlsQosClassMapMatchLayer4SrcPortRange, sleMlsQosClassMapMatchLayer4DstPortRange,
sleMplsQosClassMapMatchCriteria, sleMlsQosClassMapControlRequest, sleMlsQosClassMapControlStatus, sleMlsQosClassMapControlTimer, sleMlsQosClassMapontrolTimeStamp,
sleMlsQosClassMapControlReqResult, sleMlsQosClassMapCtrlName, sleMlsQosClassMapCtrlMatchType, sleMlsQosClassMapCtrlMatchVal, sleMlsQosClassMapCtrlMatchRangeType,
sleMlsQosClassMapCtrlMatchRangeLow, sleMlsQosClassMapCtrlMatchRangeHigh, sleMlsQosClassMapCtrlMatchEtherType, sleMlsQosClassMapCtrlMatchSrcType, sleMlsQosClassMapCtrlMatchSrcAddr,
sleMlsQosClassMapCtrlMatchDstAddr, sleMlsQosClassMapCtrlMatchSrcIpMaskLen, sleMlsQosClassMapCtrlMatchDstIpMaskLen, sleMlsQosClassMapCtrlMatchSrcMacMask, sleMlsQosClassMapCtrlMatchDstMacMask,
sleMlsQosClassMapCtrlMatchAcessGroup, sleMlsQosClassMapCtrlMatchVlanTpid, sleMlsQosClassMapCtrlMatchEgressInterface, sleMplsQosClassMapCtrlMatchCriteria, sleMlsQosPmapName,
sleMlsQosPmapClassName, sleMlsQosPmapClassMatchPriority, sleMlsQosPmapClassOperMode, sleMlsQosPmapClassPoliceType, sleMlsQosPmapClassPoliceCIR,
sleMlsQosPmapClassPolicePIR, sleMlsQosPmapClassPoliceCBS, sleMlsQosPmapClassPoliceEBS, sleMlsQosPmapClassPoliceExdAction, sleMlsQosPmapClassPoliceExdActionCos,
sleMlsQosPmapClassPoliceExdActionDscp, sleMlsQosPmapClassPoliceExdActionTos, sleMlsQosPmapClassPoliceExdActionViolateAction, sleMlsQosPmapClassPoliceExdActionViolateValue, sleMlsQosPmapClassPoliceAggregateName,
sleMlsQosPmapClassSetActionDeny, sleMlsQosPmapClassSetActionCos, sleMlsQosPmapClassSetActionCpuCos, sleMlsQosPmapClassSetActionIpDscp, sleMlsQosPmapClassSetActionIp6Dscp,
sleMlsQosPmapClassSetActionIpPrecedence, sleMlsQosPmapClassSetActionIp6Precedence, sleMlsQosPmapClassSetActionMirrorToPortVal, sleMlsQosPmapClassSetActionRedirectToPortVal, sleMlsQosPmapClassSetActionVlanId,
sleMlsQosPmapClassSetActionVlanCos, sleMlsQosPmapClassSetActionQosGroup, sleMplsQosPmapClassSetActionQueue, sleMplsQosPmapClassSetActionCopyCpu, sleMlsQosPolicyMapControlRequest,
sleMlsQosPolicyMapControlStatus, sleMlsQosPolicyMapControlTimer, sleMlsQosPolicyMapontrolTimeStamp, sleMlsQosPolicyMapControlReqResult, sleMlsQosPolicyMapCtrlName,
sleMlsQosPolicyMapCtrlClassName, sleMlsQosPolicyMapCtrlClassMatchPriority, sleMlsQosPolicyMapCtrlClassOperMode, sleMlsQosPolicyMapCtrlClassPoliceType, sleMlsQosPolicyMapCtrlClassPoliceCIR,
sleMlsQosPolicyMapCtrlClassPolicePIR, sleMlsQosPolicyMapCtrlClassPoliceCBS, sleMlsQosPolicyMapCtrlClassPoliceEBS, sleMlsQosPolicyMapCtrlClassPoliceExdAction, sleMlsQosPolicyMapCtrlClassPoliceExdActionCos,
sleMlsQosPolicyMapCtrlClassPoliceExdActionDscp, sleMlsQosPolicyMapCtrlClassPoliceExdActionTos, sleMlsQosPolicyMapCtrlClassPoliceExdActionViolateAction, sleMlsQosPolicyMapCtrlClassPoliceExdActionViolateValue, sleMlsQosPolicyMapCtrlClassPoliceAggregateName,
sleMlsQosPolicyMapCtrlClassSetAction, sleMlsQosPolicyMapCtrlClassSetActionCos, sleMlsQosPolicyMapCtrlClassSetActionCpuCos, sleMlsQosPolicyMapCtrlClassSetActionIpDscp, sleMlsQosPolicyMapCtrlClassSetActionIp6Dscp,
sleMlsQosPolicyMapCtrlClassSetActionIpPrecedence, sleMlsQosPolicyMapCtrlClassSetActionIp6Precedence, sleMlsQosPolicyMapCtrlClassSetActionMirrorToPort, sleMlsQosPolicyMapCtrlClassSetActionRedirectToPort, sleMlsQosPolicyMapCtrlClassSetActionVlanId,
sleMlsQosPolicyMapCtrlClassSetActionVlanCos, sleMlsQosPolicyMapCtrlClassSetActionQosGroup, sleMlsQosPolicyMapCtrlClassSetActionQueue, sleMlsQosInterfaceIndex, sleMlsQosInterfaceName,
sleMlsQosInterfaceTrustState, sleMlsQosInterfaceCos, sleMlsQosInterfaceCosOverride, sleMlsQosInterfaceCosToCos, sleMlsQosInterfaceCosToQueue,
sleMlsQosInterfaceDscp, sleMlsQosInterfaceDscpToDscp, sleMlsQosInterfaceDscpToQueue, sleMlsQosInterfaceExpToExp, sleMlsQosInterfaceTrafficShapeRate,
sleMlsQosInterfaceTrafficShapeBurst, sleMlsQosInterfaceInputPolicyMap, sleMlsQosInterfaceOutputPolicyMap, sleMlsQosInterfaceTrustPassthroughCos, sleMlsQosInterfaceTrustPassthroughDscp,
sleHQosInterfaceCosToClass, sleHQosInterfaceDscpToClass, sleHQosInterfaceReplace, sleMlsQosInterfaceTrafficIfgExclude, sleMlsQosInterfaceTrafficPolicingRate,
sleMlsQosInterfaceTrafficPolicingBurst, sleMlsQosInterfaceControlRequest, sleMlsQosInterfaceControlStatus, sleMlsQosInterfaceControlTimer, sleMlsQosInterfaceontrolTimeStamp,
sleMlsQosInterfaceControlReqResult, sleMlsQosInterfaceCtrlIndex, sleMlsQosInterfaceCtrlMapingType, sleMlsQosInterfaceCtrlMapingIngVal, sleMlsQosInterfaceCtrlMapingEgrVal,
sleMlsQosInterfaceCtrlMapingCosOverride, sleMlsQosInterfaceCtrlMapingTrustState, sleMlsQosInterfaceCtrlTrafficShapeRate, sleMlsQosInterfaceCtrlTrafficShapeBurst, sleMlsQosInterfaceCtrlInputPolicyMap,
sleMlsQosInterfaceCtrlOutputPolicyMap, sleMlsQosInterfaceCtrlMapingCNGValue, sleMlsQosInterfaceCtrlMapingEgrClassVal, sleMlsQosInterfaceCtrlReplace, sleMlsQosIntfQueIntfIndex,
sleMlsQosIntfQueId, sleMlsQosIntfQueShapeQueueRate, sleMlsQosIntfQueWrrQueueWeight, sleMlsQosIntfQueWrrRandomDetectMinThr, sleMlsQosIntfQueWrrRandomDetectMaxThr,
sleMlsQosIntfQueWrrRandomDetectExpWt, sleMlsQosIntfQueTailDropThr, sleMlsQosIntfQueStrictQueue, sleMlsQosIntfQueRandomDetectDropStart, sleMlsQosIntfQueRandomDetectDropSlope,
sleMlsQosIntfQueRandomDetectColor, sleMlsQosIntfQueReservedBandwidth, sleMlsQosIntfQueControlRequest, sleMlsQosIntfQueControlStatus, sleMlsQosIntfQueControlTimer,
sleMlsQosIntfQueontrolTimeStamp, sleMlsQosIntfQueControlReqResult, sleMlsQosIntfQueCtrlInterfaceIndex, sleMlsQosIntfQueCtrlQueueId, sleMlsQosIntfQueCtrlProfileType,
sleMlsQosIntfQueCtrlShapeQueueRate, sleMlsQosIntfQueCtrlWrrQueueWeight, sleMlsQosIntfQueCtrlWrrRandomDetectMinThr, sleMlsQosIntfQueCtrlWrrRandomDetectMaxThr, sleMlsQosIntfQueCtrlWrrRandomDetectExpWt,
sleMlsQosIntfQueCtrlTailDropThr, sleMlsQosIntfQueCtrlRandomDetectDropStart, sleMlsQosIntfQueCtrlRandomDetectDropSlope, sleMlsQosIntfQueCtrlRandomDetectColor, sleMlsQosIntfQueCtrlReservedBandwidth,
sleMlsQosQstatsIfIndex, sleMlsQosQId, sleMlsQosWredGreenDropPkts, sleMlsQosWredYellowDropPkts, sleMlsQosWredRedDropPkts,
sleMlsQosTailDropPkts, sleMlsQosTailDropBytes, sleMlsQosQStatsOutPkts, sleMlsQosQStatsOutBytes, sleMlsQosQStatsMcastOutPkts,
sleMlsQosQStatsMcastOutBytes, sleMlsQosQStatsDropPkts, sleMlsQosQStatsDropBytes, sleMlsQosQStatsMcastDropPkts, sleMlsQosQStatsMcastDropBytes,
sleMlsQosQStatsEnqueuedPkts, sleMlsQosQStatsEnqueuedBytes, sleMlsQosQStatsControlRequest, sleMlsQosQStatsControlStatus, sleMlsQosQStatsControlTimer,
sleMlsQosQStatsontrolTimeStamp, sleMlsQosQStatsControlReqResult, sleMlsQosQstatsCtrlIfIndex, sleMlsQosQstatsCtrlQId, sleHqosClassMapQueueInfoName,
sleHqosClassMapQueueInfoMatchGroup, sleHqosClassMapQueueControlRequest, sleHqosClassMapQueueControlStatus, sleHqosClassMapQueueControlTimer, sleHqosClassMapQueueControlTimeStamp,
sleHqosClassMapQueueControlReqResult, sleHqosClassMapQueueControlName, sleHqosClassMapQueueControlMatchGroup, sleHqosPolicyMapQueueInfoName, sleHqosPolicyMapQueueInfoShape,
sleHqosPolicyMapQueueInfoBandwidth, sleHqosPolicyMapQueueInfoBandwidthRemainingPercent, sleHqosPolicyMapQueueInfoQueueLimit, sleHqosPolicyMapQueueInfoServicePolicyName, sleHqosPolicyMapQueueInfoPriority,
sleHqosPolicyMapQueueInfoRDMinThreshold, sleHqosPolicyMapQueueInfoRDMaxThreshold, sleHqosPolicyMapQueueControlRequest, sleHqosPolicyMapQueueControlStatus, sleHqosPolicyMapQueueControlTimer,
sleHqosPolicyMapQueueControlTimeStamp, sleHqosPolicyMapQueueControlReqResult, sleHqosPolicyMapQueueControlName, sleHqosPolicyMapQueueControlClassMapQueueName, sleHqosPolicyMapQueueControlParams,
sleHqosPolicyMapQueueControlParamsValue, sleHqosPolicyMapQueueControlUnits, sleHqosPolicyMapQueueControlRDMiniThreshold, sleHqosPolicyMapQueueControlRDMaxThreshold, sleHqosPolicyMapQueueControlRDMinimumUnits,
sleHqosPolicyMapQueueControlRDMaximumUnits, sleHqosPolicyMapQueueControlServicePolicyName, sleMlsQosAclGlobalInfoMaxAccessList, sleMlsQosAclGlobalControlRequest, sleMlsQosAclGlobalControlStatus,
sleMlsQosAclGlobalControlTimer, sleMlsQosAclGlobalControlTimeStamp, sleMlsQosAclGlobalControlReqResult, sleMlsQosAclGlobalControlMaxAccessList }
STATUS current
DESCRIPTION
"Description."
::= { sleMlsQos 12 }
END
--
-- sle-mlsqos-mib.mib
--
Reference in New Issue Copy Permalink