mibs/MIBS/dasan/SLE-MPLS-TP-VPLS-MIB

1576 lines
40 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- sle-mpls-tp-vpls-mib.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
-- Friday, February 05, 2016 at 10:50:22
--
SLE-MPLS-TP-VPLS-MIB DEFINITIONS ::= BEGIN
IMPORTS
sleMgmt
FROM DASAN-SMI
IANAPwTypeTC
FROM IANA-PWE3-MIB
InterfaceIndexOrZero
FROM IF-MIB
MplsCcId, MplsIccId
FROM MPLS-TC-EXT-STD-MIB
MplsLabel
FROM MPLS-TC-STD-MIB
VlanIdOrAnyOrNone
FROM Q-BRIDGE-MIB
SleControlStatusType, SleControlRequestResultType
FROM SLE-TC-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
transmission, TimeTicks, IpAddress, Unsigned32, Gauge32,
Counter64, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY
FROM SNMPv2-SMI;
sleMplsTpVpls MODULE-IDENTITY
LAST-UPDATED "201511030000Z" -- November 03, 2015 at 00:00 GMT
ORGANIZATION
"Dasan Networks"
CONTACT-INFO
"Gyerok Kwon
Dasan Networks
Email: grkwon@dasannetworks.com
Kantharaj B M
Dasan Networks
Email: kanth@dasannetworks.com
DongChel Shin (Chris)
Dasan Networks
Email: dchshin@dasannetworks.com
Comments about this document should be emailed
directly to the Dasan support email ID at
support@dasannetworks.com."
DESCRIPTION
"This MIB module containg the managed object definition for
MPLS-TP Virtual Private LAN Service(VPLS) operation.
copyright (c) 2015 Dasan Networks and the persons identified
as authors of the code. All rights reserved."
REVISION "201511030000Z" -- November 03, 2015 at 00:00 GMT
DESCRIPTION
"Initial version."
::= { sleMpls 16 }
--
-- Node definitions
--
sleMpls OBJECT-IDENTITY
STATUS current
DESCRIPTION
"SLE MPLS."
::= { sleMgmt 16 }
sleMplsTpVplsCfg OBJECT IDENTIFIER ::= { sleMplsTpVpls 1 }
sleMplsTpVplsCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMplsTpVplsCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for configuring and
status monitoring that is common to all service types
and PSN types of VPLS."
::= { sleMplsTpVplsCfg 1 }
sleMplsTpVplsCfgInfoEntry OBJECT-TYPE
SYNTAX SleMplsTpVplsCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table is indexed by
sleMplsTpPwCfgNameInfo."
INDEX { sleMplsTpVplsCfgInfoId }
::= { sleMplsTpVplsCfgInfoTable 1 }
SleMplsTpVplsCfgInfoEntry ::=
SEQUENCE {
sleMplsTpVplsCfgInfoId
Unsigned32,
sleMplsTpVplsCfgInfoName
OCTET STRING,
sleMplsTpVplsCfgInfoMacLearning
INTEGER,
sleMplsTpVplsCfgInfoMacLearningLimit
INTEGER,
sleMplsTpVplsCfgInfoServiceType
IANAPwTypeTC,
sleMplsTpVplsCfgInfoSignallingProto
INTEGER,
sleMplsTpVplsCfgInfoGroupId
Unsigned32,
sleMplsTpVplsCfgInfoDescription
SnmpAdminString,
sleMplsTpVplsCfgInfoMtu
INTEGER
}
sleMplsTpVplsCfgInfoId OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPLS Id. It identifies an entry
on this table."
::= { sleMplsTpVplsCfgInfoEntry 1 }
sleMplsTpVplsCfgInfoName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Name. It identifies an entry
on this table."
::= { sleMplsTpVplsCfgInfoEntry 2 }
sleMplsTpVplsCfgInfoMacLearning OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Use to indentify the MAC Learning status."
::= { sleMplsTpVplsCfgInfoEntry 3 }
sleMplsTpVplsCfgInfoMacLearningLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Learning Limit of the VPLS.
32767 is default mac learning limit."
::= { sleMplsTpVplsCfgInfoEntry 4 }
sleMplsTpVplsCfgInfoServiceType OBJECT-TYPE
SYNTAX IANAPwTypeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service type of VPLS."
DEFVAL { ethernet }
::= { sleMplsTpVplsCfgInfoEntry 5 }
sleMplsTpVplsCfgInfoSignallingProto OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
static(1),
bgp(2),
ldp(3),
bgpAdLdp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signalling proto id of VPLS."
::= { sleMplsTpVplsCfgInfoEntry 6 }
sleMplsTpVplsCfgInfoGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Group Id of VPLS."
::= { sleMplsTpVplsCfgInfoEntry 7 }
sleMplsTpVplsCfgInfoDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of VPLS."
::= { sleMplsTpVplsCfgInfoEntry 8 }
sleMplsTpVplsCfgInfoMtu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mtu of VPLS."
DEFVAL { 1500 }
::= { sleMplsTpVplsCfgInfoEntry 9 }
sleMplsTpVplsCfgControl OBJECT IDENTIFIER ::= { sleMplsTpVplsCfg 2 }
sleMplsTpVplsCfgControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createVpls(1),
deleteVpls(2),
setVplsMACLearningDisable(3),
setVplsMACLearningLimit(4),
setVplsACGroup(5),
setVplsDescription(6),
setVplsMtu(7),
setVplsServiceType(8),
unsetVplsMACLearningDisable(9),
unsetVplsMACLearningLimit(10),
unsetVplsACGroup(11),
unsetVplsDesc(12),
unsetVplsMtu(13),
unsetVplsServiceType(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"his object holds the possible read-write columns that can be modified
in the sleMplsTpVplsCfg table. For each read-write column of
sleMplsTpVplsCfg table, a Set Operation control value is added in this
object."
::= { sleMplsTpVplsCfgControl 1 }
sleMplsTpVplsCfgControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the status of the configuration done."
::= { sleMplsTpVplsCfgControl 2 }
sleMplsTpVplsCfgControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is based on the SLE style where a timer is configured for every control table."
::= { sleMplsTpVplsCfgControl 3 }
sleMplsTpVplsCfgControlTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time at which the configuration is done."
::= { sleMplsTpVplsCfgControl 4 }
sleMplsTpVplsCfgControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard result of the SET operation is stored here."
::= { sleMplsTpVplsCfgControl 5 }
sleMplsTpVplsCfgControlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Id. It identifies an entry
on this table."
::= { sleMplsTpVplsCfgControl 6 }
sleMplsTpVplsCfgControlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Name. It identifies an entry
on this table."
::= { sleMplsTpVplsCfgControl 7 }
sleMplsTpVplsCfgControlMacLearningLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC Learning Limit of the VPLS."
::= { sleMplsTpVplsCfgControl 8 }
sleMplsTpVplsCfgControlServiceType OBJECT-TYPE
SYNTAX IANAPwTypeTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of VPLS."
DEFVAL { ethernet }
::= { sleMplsTpVplsCfgControl 9 }
sleMplsTpVplsCfgControlGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Group Id of VPLS."
::= { sleMplsTpVplsCfgControl 10 }
sleMplsTpVplsCfgControlDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description of VPLS."
::= { sleMplsTpVplsCfgControl 11 }
sleMplsTpVplsCfgControlMtu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mtu of VPLS."
DEFVAL { 1500 }
::= { sleMplsTpVplsCfgControl 12 }
sleMplsTpVplsIfCfg OBJECT IDENTIFIER ::= { sleMplsTpVpls 2 }
sleMplsTpVplsIfCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMplsTpVplsIfCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for binding the VPLS on
the MPLS-TP service provider interface."
::= { sleMplsTpVplsIfCfg 1 }
sleMplsTpVplsIfCfgInfoEntry OBJECT-TYPE
SYNTAX SleMplsTpVplsIfCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table is indexed by
sleMplsTpVplsIfCfgInfoIndex."
INDEX { sleMplsTpVplsIfCfgInfoName, sleMplsTpVplsIfCfgInfoIfIndex }
::= { sleMplsTpVplsIfCfgInfoTable 1 }
SleMplsTpVplsIfCfgInfoEntry ::=
SEQUENCE {
sleMplsTpVplsIfCfgInfoIfIndex
InterfaceIndexOrZero,
sleMplsTpVplsIfCfgInfoName
OCTET STRING,
sleMplsTpVplsIfCfgInfoServiceType
IANAPwTypeTC,
sleMplsTpVplsIfCfgInfoVlanId
VlanIdOrAnyOrNone,
sleMplsTpVplsIfCfgInfoInnerVlanId
VlanIdOrAnyOrNone,
sleMplsTpVplsIfCfgInfoAction
INTEGER
}
sleMplsTpVplsIfCfgInfoIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Customer-facing/service-provider Interface Index."
::= { sleMplsTpVplsIfCfgInfoEntry 1 }
sleMplsTpVplsIfCfgInfoName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPLS Name which bind on interface."
::= { sleMplsTpVplsIfCfgInfoEntry 2 }
sleMplsTpVplsIfCfgInfoServiceType OBJECT-TYPE
SYNTAX IANAPwTypeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service Type of VPLS bind on interface."
::= { sleMplsTpVplsIfCfgInfoEntry 3 }
sleMplsTpVplsIfCfgInfoVlanId OBJECT-TYPE
SYNTAX VlanIdOrAnyOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN Id of bind VPLS. It should have valid value when
sleMplsTpPwIfCfgServiceType is ethernetTagged."
::= { sleMplsTpVplsIfCfgInfoEntry 4 }
sleMplsTpVplsIfCfgInfoInnerVlanId OBJECT-TYPE
SYNTAX VlanIdOrAnyOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inner VLAN Id of bind VPLS. It should have valid value when
sleMplsTpPwIfCfgServiceType is ethernetTagged."
::= { sleMplsTpVplsIfCfgInfoEntry 5 }
sleMplsTpVplsIfCfgInfoAction OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
noOperation(1),
add(2),
remove(3),
replace(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS operation.When pkt come with vlan-id, it says
the operation towards what should do at egress.It is
applicable at egress."
::= { sleMplsTpVplsIfCfgInfoEntry 6 }
sleMplsTpVplsIfCfgControl OBJECT IDENTIFIER ::= { sleMplsTpVplsIfCfg 2 }
sleMplsTpVplsIfCfgControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setBindVplsUntaggedMode(1),
setBindVplsSvlan(2),
setBindVplsTaggedMode(3),
setBindVplsQinQ(4),
setBindVplsQinQWithAction(5),
unsetbindvplsUnTaggedMode(6),
unsetBindVplsTaggedMode(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object holds the possible read-write columns that can be modified
in the sleMplsTpVplsIfCfg table. For each read-write column of
sleMplsTpVplsIfCfg table, a Set Operation control value is
added in this object."
::= { sleMplsTpVplsIfCfgControl 1 }
sleMplsTpVplsIfCfgControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the status of the configuration done."
::= { sleMplsTpVplsIfCfgControl 2 }
sleMplsTpVplsIfCfgControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is based on the SLE style where a timer is configured for every control table."
::= { sleMplsTpVplsIfCfgControl 3 }
sleMplsTpVplsIfCfgControlTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time at which the configuration is done."
::= { sleMplsTpVplsIfCfgControl 4 }
sleMplsTpVplsIfCfgControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard result of the SET operation is stored here."
::= { sleMplsTpVplsIfCfgControl 5 }
sleMplsTpVplsIfCfgControlIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Customer-facing/service-provider Interface Index."
::= { sleMplsTpVplsIfCfgControl 6 }
sleMplsTpVplsIfCfgControlName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Name which bind on interface."
::= { sleMplsTpVplsIfCfgControl 7 }
sleMplsTpVplsIfCfgControlServiceType OBJECT-TYPE
SYNTAX IANAPwTypeTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service Type of VPLS bind on interface."
::= { sleMplsTpVplsIfCfgControl 8 }
sleMplsTpVplsIfCfgControlVlanId OBJECT-TYPE
SYNTAX VlanIdOrAnyOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Id of bind VPLS. It should have valid value when
sleMplsTpPwIfCfgServiceType is ethernetTagged."
::= { sleMplsTpVplsIfCfgControl 9 }
sleMplsTpVplsIfCfgControlInnerVlanId OBJECT-TYPE
SYNTAX VlanIdOrAnyOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inner VLAN Id of bind VPLS. It should have valid value when
sleMplsTpPwIfCfgServiceType is ethernetTagged."
::= { sleMplsTpVplsIfCfgControl 10 }
sleMplsTpVplsIfCfgControlAction OBJECT-TYPE
SYNTAX INTEGER
{
noOperation(1),
add(2),
remove(3),
replace(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS operation.When pkt come with vlan-id, it says
the operation towards what should do at egress.It is
applicable at egress."
::= { sleMplsTpVplsIfCfgControl 11 }
sleMplsTpVplsMeshCfg OBJECT IDENTIFIER ::= { sleMplsTpVpls 3 }
sleMplsTpVplsMeshCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMplsTpVplsMeshCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for VPLS Mesh peer's."
::= { sleMplsTpVplsMeshCfg 1 }
sleMplsTpVplsMeshCfgInfoEntry OBJECT-TYPE
SYNTAX SleMplsTpVplsMeshCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table is indexed by
sleMplsTpVplsCfgInfoId and sleMplsTpVplsMeshInfoNodeId."
INDEX { sleMplsTpVplsCfgInfoId, sleMplsTpVplsMeshCfgInfoPeerNodeId }
::= { sleMplsTpVplsMeshCfgInfoTable 1 }
SleMplsTpVplsMeshCfgInfoEntry ::=
SEQUENCE {
sleMplsTpVplsMeshCfgInfoPeerNodeId
IpAddress,
sleMplsTpVplsMeshCfgInfoPeerNodeType
INTEGER,
sleMplsTpVplsMeshCfgInfoPeerGlobalId
Unsigned32,
sleMplsTpVplsMeshCfgInfoPeerCc
MplsCcId,
sleMplsTpVplsMeshCfgInfoPeerIcc
MplsIccId,
sleMplsTpVplsMeshCfgInfoTunnelId
INTEGER,
sleMplsTpVplsMeshCfgInfoTunnelName
OCTET STRING,
sleMplsTpVplsMeshCfgInfoOwner
INTEGER,
sleMplsTpVplsMeshCfgInfoTunnelPath
INTEGER,
sleMplsTpVplsMeshCfgInfoInLabel
MplsLabel,
sleMplsTpVplsMeshCfgInfoOutLabel
MplsLabel,
sleMplsTpVplsMeshCfgInfoOutInterface
InterfaceIndexOrZero,
sleMplsTpVplsMeshCfgInfoTunnelLabel
MplsLabel,
sleMplsTpVplsMeshCfgInfoState
INTEGER,
sleMplsTpVplsMeshCfgInfoQosServicePolicy
OCTET STRING
}
sleMplsTpVplsMeshCfgInfoPeerNodeId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPLS Mesh Peer Node Id."
::= { sleMplsTpVplsMeshCfgInfoEntry 1 }
sleMplsTpVplsMeshCfgInfoPeerNodeType OBJECT-TYPE
SYNTAX INTEGER
{
ietf(1),
itut(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Node Type."
::= { sleMplsTpVplsMeshCfgInfoEntry 2 }
sleMplsTpVplsMeshCfgInfoPeerGlobalId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Global Id."
::= { sleMplsTpVplsMeshCfgInfoEntry 3 }
sleMplsTpVplsMeshCfgInfoPeerCc OBJECT-TYPE
SYNTAX MplsCcId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Country Code(CC) Name."
::= { sleMplsTpVplsMeshCfgInfoEntry 4 }
sleMplsTpVplsMeshCfgInfoPeerIcc OBJECT-TYPE
SYNTAX MplsIccId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Icc Name."
::= { sleMplsTpVplsMeshCfgInfoEntry 5 }
sleMplsTpVplsMeshCfgInfoTunnelId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-id."
::= { sleMplsTpVplsMeshCfgInfoEntry 6 }
sleMplsTpVplsMeshCfgInfoTunnelName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-Name."
::= { sleMplsTpVplsMeshCfgInfoEntry 7 }
sleMplsTpVplsMeshCfgInfoOwner OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
pwIdFecSignaling(2),
genFecSignaling(3),
l2tpControlProtocol(4),
other(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-Name."
::= { sleMplsTpVplsMeshCfgInfoEntry 8 }
sleMplsTpVplsMeshCfgInfoTunnelPath OBJECT-TYPE
SYNTAX INTEGER
{
forward(0),
reverse(1),
none(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-Path."
DEFVAL { forward }
::= { sleMplsTpVplsMeshCfgInfoEntry 9 }
sleMplsTpVplsMeshCfgInfoInLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Fib entry In-label."
::= { sleMplsTpVplsMeshCfgInfoEntry 10 }
sleMplsTpVplsMeshCfgInfoOutLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Fib entry Out-label."
::= { sleMplsTpVplsMeshCfgInfoEntry 11 }
sleMplsTpVplsMeshCfgInfoOutInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Fib entry Out-Interface."
::= { sleMplsTpVplsMeshCfgInfoEntry 12 }
sleMplsTpVplsMeshCfgInfoTunnelLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel out label."
::= { sleMplsTpVplsMeshCfgInfoEntry 13 }
sleMplsTpVplsMeshCfgInfoState OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer State."
::= { sleMplsTpVplsMeshCfgInfoEntry 14 }
sleMplsTpVplsMeshCfgInfoQosServicePolicy OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Mesh Peer qos input service policy."
::= { sleMplsTpVplsMeshCfgInfoEntry 15 }
sleMplsTpVplsMeshCfgControl OBJECT IDENTIFIER ::= { sleMplsTpVplsMeshCfg 2 }
sleMplsTpVplsMeshCfgControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createMplsTpVplsPeer(1),
createMplsTpVplsPeerWithTunnelPath(2),
deleteVplsPeer(3),
setVplsPeerFibEntry(4),
unsetVplsPeerFibEntry(5),
setVplsPeerQosServicePolicy(6),
unsetVplsPeerQosServicePolicy(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object holds the possible read-write columns that can be modified
in the sleMplsTpVplsMeshCfg table. For each read-write column of
sleMplsTpVplsMeshCfg table, a Set Operation control value is
added in this object."
::= { sleMplsTpVplsMeshCfgControl 1 }
sleMplsTpVplsMeshCfgControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the status of the configuration done."
::= { sleMplsTpVplsMeshCfgControl 2 }
sleMplsTpVplsMeshCfgControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is based on the SLE style where a timer is configured for every control table."
::= { sleMplsTpVplsMeshCfgControl 3 }
sleMplsTpVplsMeshCfgControlTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time at which the configuration is done."
::= { sleMplsTpVplsMeshCfgControl 4 }
sleMplsTpVplsMeshCfgControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard result of the SET operation is stored here."
::= { sleMplsTpVplsMeshCfgControl 5 }
sleMplsTpVplsMeshCfgControlVplsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS ID which this peer should configure."
::= { sleMplsTpVplsMeshCfgControl 6 }
sleMplsTpVplsMeshCfgControlPeerNodeId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Node Id."
::= { sleMplsTpVplsMeshCfgControl 7 }
sleMplsTpVplsMeshCfgControlPeerNodeType OBJECT-TYPE
SYNTAX INTEGER
{
ietf(1),
itut(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Node Type."
::= { sleMplsTpVplsMeshCfgControl 8 }
sleMplsTpVplsMeshCfgControlPeerGlobalId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Global Id."
::= { sleMplsTpVplsMeshCfgControl 9 }
sleMplsTpVplsMeshCfgControlPeerCc OBJECT-TYPE
SYNTAX MplsCcId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Country Code(CC) Name."
::= { sleMplsTpVplsMeshCfgControl 10 }
sleMplsTpVplsMeshCfgControlPeerIcc OBJECT-TYPE
SYNTAX MplsIccId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Icc Name."
::= { sleMplsTpVplsMeshCfgControl 11 }
sleMplsTpVplsMeshCfgControlTunnelId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-id."
::= { sleMplsTpVplsMeshCfgControl 12 }
sleMplsTpVplsMeshCfgControlTunnelName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-Name."
::= { sleMplsTpVplsMeshCfgControl 13 }
sleMplsTpVplsMeshCfgControlOwner OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
pwIdFecSignaling(2),
genFecSignaling(3),
l2tpControlProtocol(4),
other(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-Name."
::= { sleMplsTpVplsMeshCfgControl 14 }
sleMplsTpVplsMeshCfgControlTunnelPath OBJECT-TYPE
SYNTAX INTEGER
{
forward(0),
reverse(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Tunnel-Path."
DEFVAL { forward }
::= { sleMplsTpVplsMeshCfgControl 15 }
sleMplsTpVplsMeshCfgControlInLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Fib entry In-label."
::= { sleMplsTpVplsMeshCfgControl 16 }
sleMplsTpVplsMeshCfgControlOutLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer Fib entry Out-label."
::= { sleMplsTpVplsMeshCfgControl 17 }
sleMplsTpVplsMeshCfgControlQosServicePolicy OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Mesh Peer qos input service policy."
::= { sleMplsTpVplsMeshCfgControl 18 }
sleMplsTpVplsSpokeCfg OBJECT IDENTIFIER ::= { sleMplsTpVpls 4 }
sleMplsTpVplsSpokeCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMplsTpVplsSpokeCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for VPLS Spoke vc."
::= { sleMplsTpVplsSpokeCfg 1 }
sleMplsTpVplsSpokeCfgInfoEntry OBJECT-TYPE
SYNTAX SleMplsTpVplsSpokeCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table is indexed by
sleMplsTpVplsCfgInfoId and sleMplsTpVplsSpokeInfoVcName."
INDEX { sleMplsTpVplsCfgInfoId, sleMplsTpVplsSpokeCfgInfoVcName }
::= { sleMplsTpVplsSpokeCfgInfoTable 1 }
SleMplsTpVplsSpokeCfgInfoEntry ::=
SEQUENCE {
sleMplsTpVplsSpokeCfgInfoVcName
OCTET STRING,
sleMplsTpVplsSpokeCfgInfoTunnelName
OCTET STRING,
sleMplsTpVplsSpokeCfgInfoServiceType
IANAPwTypeTC,
sleMplsTpVplsSpokeCfgInfoInLabel
MplsLabel,
sleMplsTpVplsSpokeCfgInfoOutLabel
MplsLabel,
sleMplsTpVplsSpokeCfgInfoOutInterface
InterfaceIndexOrZero,
sleMplsTpVplsSpokeCfgInfoState
INTEGER,
sleMplsTpVplsSpokeCfgInfoQosServicePolicy
OCTET STRING
}
sleMplsTpVplsSpokeCfgInfoVcName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke VC Name."
::= { sleMplsTpVplsSpokeCfgInfoEntry 1 }
sleMplsTpVplsSpokeCfgInfoTunnelName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke Tunnel Name."
::= { sleMplsTpVplsSpokeCfgInfoEntry 2 }
sleMplsTpVplsSpokeCfgInfoServiceType OBJECT-TYPE
SYNTAX IANAPwTypeTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke Service Type."
::= { sleMplsTpVplsSpokeCfgInfoEntry 3 }
sleMplsTpVplsSpokeCfgInfoInLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke Fib In label."
::= { sleMplsTpVplsSpokeCfgInfoEntry 4 }
sleMplsTpVplsSpokeCfgInfoOutLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke Fib Out label."
::= { sleMplsTpVplsSpokeCfgInfoEntry 5 }
sleMplsTpVplsSpokeCfgInfoOutInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke Fib Out Interface."
::= { sleMplsTpVplsSpokeCfgInfoEntry 6 }
sleMplsTpVplsSpokeCfgInfoState OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke Admin status."
::= { sleMplsTpVplsSpokeCfgInfoEntry 7 }
sleMplsTpVplsSpokeCfgInfoQosServicePolicy OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Spoke qos input service policy."
::= { sleMplsTpVplsSpokeCfgInfoEntry 8 }
sleMplsTpVplsSpokeCfgControl OBJECT IDENTIFIER ::= { sleMplsTpVplsSpokeCfg 2 }
sleMplsTpVplsSpokeCfgControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createMplsTpVplsSpoke(1),
deleteMplsTpVplsSpoke(2),
setVplsSpokeFibEntry(3),
unsetVplsSpokeFibEntry(4),
setVplsSpokeQosServicePolicy(5),
unsetVplsSpokeQosServicePolicy(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object holds the possible read-write columns that can be modified
in the sleMplsTpVplsSpokeCfg table. For each read-write column of
sleMplsTpVplsSpokeCfg table, a Set Operation control value is
added in this object."
::= { sleMplsTpVplsSpokeCfgControl 1 }
sleMplsTpVplsSpokeCfgControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the status of the configuration done."
::= { sleMplsTpVplsSpokeCfgControl 2 }
sleMplsTpVplsSpokeCfgControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is based on the SLE style where a timer is
configured for every control table."
::= { sleMplsTpVplsSpokeCfgControl 3 }
sleMplsTpVplsSpokeCfgControlTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time at which the configuration is done."
::= { sleMplsTpVplsSpokeCfgControl 4 }
sleMplsTpVplsSpokeCfgControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard result of the SET operation is stored here."
::= { sleMplsTpVplsSpokeCfgControl 5 }
sleMplsTpVplsSpokeCfgControlVplsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Name which this peer should configure."
::= { sleMplsTpVplsSpokeCfgControl 6 }
sleMplsTpVplsSpokeCfgControlVcName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Spoke VC Name."
::= { sleMplsTpVplsSpokeCfgControl 7 }
sleMplsTpVplsSpokeCfgControlTunnelName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Spoke Tunnel Name."
::= { sleMplsTpVplsSpokeCfgControl 8 }
sleMplsTpVplsSpokeCfgControlServiceType OBJECT-TYPE
SYNTAX IANAPwTypeTC
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Spoke Service Type."
::= { sleMplsTpVplsSpokeCfgControl 9 }
sleMplsTpVplsSpokeCfgControlInLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Spoke Fib In label."
::= { sleMplsTpVplsSpokeCfgControl 10 }
sleMplsTpVplsSpokeCfgControlOutLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Spoke Fib Out label."
::= { sleMplsTpVplsSpokeCfgControl 11 }
sleMplsTpVplsSpokeCfgControlOutInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Spoke Fib Out Interface."
::= { sleMplsTpVplsSpokeCfgControl 12 }
sleMplsTpVplsSpokeCfgControlQosServicePolicy OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Spoke qos input service policy."
::= { sleMplsTpVplsSpokeCfgControl 13 }
sleMplsTpVplsMacLearning OBJECT IDENTIFIER ::= { sleMplsTpVpls 5 }
sleMplsTpVplsMacLearningInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMplsTpVplsMacLearningInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for VPLS Mac learned."
::= { sleMplsTpVplsMacLearning 1 }
sleMplsTpVplsMacLearningInfoEntry OBJECT-TYPE
SYNTAX SleMplsTpVplsMacLearningInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table is indexed by
sleMplsTpVplsCfgInfoId and sleMplsTpVplsMacLearningInfoMacAddress."
INDEX { sleMplsTpVplsCfgInfoId, sleMplsTpVplsMacLearningInfoMacAddress }
::= { sleMplsTpVplsMacLearningInfoTable 1 }
SleMplsTpVplsMacLearningInfoEntry ::=
SEQUENCE {
sleMplsTpVplsMacLearningInfoMacAddress
OCTET STRING,
sleMplsTpVplsMacLearningInfoInterfacIndex
InterfaceIndexOrZero,
sleMplsTpVplsMacLearningInfoMeshAddress
IpAddress
}
sleMplsTpVplsMacLearningInfoMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mac learned of VPLS service."
::= { sleMplsTpVplsMacLearningInfoEntry 1 }
sleMplsTpVplsMacLearningInfoInterfacIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the MAC Learned."
::= { sleMplsTpVplsMacLearningInfoEntry 2 }
sleMplsTpVplsMacLearningInfoMeshAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac Learned Mesh address."
::= { sleMplsTpVplsMacLearningInfoEntry 3 }
sleMplsTpVplsMacLearningControl OBJECT IDENTIFIER ::= { sleMplsTpVplsMacLearning 2 }
sleMplsTpVplsMacLearningControlRequest OBJECT-TYPE
SYNTAX INTEGER { clearVplsMacAddress(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object holds the possible read-write columns that can be modified
in the sleMplsTpVplsMacLearning table. For each read-write column of
sleMplsTpVplsMacLearning table, a Set Operation control value is
added in this object."
::= { sleMplsTpVplsMacLearningControl 1 }
sleMplsTpVplsMacLearningControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the status of the configuration done."
::= { sleMplsTpVplsMacLearningControl 2 }
sleMplsTpVplsMacLearningControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is based on the SLE style where a timer is
configured for every control table."
::= { sleMplsTpVplsMacLearningControl 3 }
sleMplsTpVplsMacLearningControlTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time at which the configuration is done."
::= { sleMplsTpVplsMacLearningControl 4 }
sleMplsTpVplsMacLearningControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard result of the SET operation is stored here."
::= { sleMplsTpVplsMacLearningControl 5 }
sleMplsTpVplsMacLearningControlVplsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Name which this peer should configure."
::= { sleMplsTpVplsMacLearningControl 6 }
sleMplsTpVplsStatistics OBJECT IDENTIFIER ::= { sleMplsTpVpls 6 }
sleMplsTpVplsAcStatistics OBJECT IDENTIFIER ::= { sleMplsTpVplsStatistics 1 }
sleMplsTpVplsAcStatisticsInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMplsTpVplsAcStatisticsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for VPLS attachement circuit
statistics."
::= { sleMplsTpVplsAcStatistics 1 }
sleMplsTpVplsAcStatisticsInfoEntry OBJECT-TYPE
SYNTAX SleMplsTpVplsAcStatisticsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table contains stats info of a VPLS instance and
bound interface."
INDEX { sleMplsTpVplsIfCfgInfoName, sleMplsTpVplsIfCfgInfoIfIndex }
::= { sleMplsTpVplsAcStatisticsInfoTable 1 }
SleMplsTpVplsAcStatisticsInfoEntry ::=
SEQUENCE {
sleMplsTpVplsAcStatisticsInfoTxPackets
Counter64,
sleMplsTpVplsAcStatisticsInfoTxBytes
Counter64,
sleMplsTpVplsAcStatisticsInfoRxPackets
Counter64,
sleMplsTpVplsAcStatisticsInfoRxBytes
Counter64
}
sleMplsTpVplsAcStatisticsInfoTxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx packet count."
::= { sleMplsTpVplsAcStatisticsInfoEntry 1 }
sleMplsTpVplsAcStatisticsInfoTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx bytes count."
::= { sleMplsTpVplsAcStatisticsInfoEntry 2 }
sleMplsTpVplsAcStatisticsInfoRxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx packet count."
::= { sleMplsTpVplsAcStatisticsInfoEntry 3 }
sleMplsTpVplsAcStatisticsInfoRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx byte count."
::= { sleMplsTpVplsAcStatisticsInfoEntry 4 }
sleMplsTpVplsPeerStatistics OBJECT IDENTIFIER ::= { sleMplsTpVplsStatistics 2 }
sleMplsTpVplsPeerStatisticsInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleMplsTpVplsPeerStatisticsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for VPLS Peer
statistics."
::= { sleMplsTpVplsPeerStatistics 1 }
sleMplsTpVplsPeerStatisticsInfoEntry OBJECT-TYPE
SYNTAX SleMplsTpVplsPeerStatisticsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table is contains the managed object
for VPLS peer (Peer) stats."
INDEX { sleMplsTpVplsCfgInfoId, sleMplsTpVplsMeshCfgInfoPeerNodeId }
::= { sleMplsTpVplsPeerStatisticsInfoTable 1 }
SleMplsTpVplsPeerStatisticsInfoEntry ::=
SEQUENCE {
sleMplsTpVplsPeerStatisticsInfoTxPackets
Counter64,
sleMplsTpVplsPeerStatisticsInfoTxBytes
Counter64,
sleMplsTpVplsPeerStatisticsInfoRxPackets
Counter64,
sleMplsTpVplsPeerStatisticsInfoRxBytes
Counter64
}
sleMplsTpVplsPeerStatisticsInfoTxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx packet count."
::= { sleMplsTpVplsPeerStatisticsInfoEntry 1 }
sleMplsTpVplsPeerStatisticsInfoTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx bytes count."
::= { sleMplsTpVplsPeerStatisticsInfoEntry 2 }
sleMplsTpVplsPeerStatisticsInfoRxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx packet count."
::= { sleMplsTpVplsPeerStatisticsInfoEntry 3 }
sleMplsTpVplsPeerStatisticsInfoRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx byte count."
::= { sleMplsTpVplsPeerStatisticsInfoEntry 4 }
sleMplsTpVplsStatisticsCfgControl OBJECT IDENTIFIER ::= { sleMplsTpVplsStatistics 3 }
sleMplsTpVplsStatisticsCfgControlRequest OBJECT-TYPE
SYNTAX INTEGER { clearVplsStatistics(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object holds the possible read-write columns that can be modified
in the sleMplsTpVplsStatisticsCfg table. For each read-write column of
sleMplsTpVplsStatisticsCfg table, a Set Operation control value is
added in this object."
::= { sleMplsTpVplsStatisticsCfgControl 1 }
sleMplsTpVplsStatisticsCfgControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the status of the configuration done."
::= { sleMplsTpVplsStatisticsCfgControl 2 }
sleMplsTpVplsStatisticsCfgControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is based on the SLE style where a timer is
configured for every control table."
::= { sleMplsTpVplsStatisticsCfgControl 3 }
sleMplsTpVplsStatisticsCfgControlTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time at which the configuration is done."
::= { sleMplsTpVplsStatisticsCfgControl 4 }
sleMplsTpVplsStatisticsCfgControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard result of the SET operation is stored here."
::= { sleMplsTpVplsStatisticsCfgControl 5 }
sleMplsTpVplsStatisticsCfgControlVplsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Name which this peer should configure."
::= { sleMplsTpVplsStatisticsCfgControl 6 }
END
--
-- sle-mpls-tp-vpls-mib.mib
--