mibs/MIBS/dasan/SLE-NETWORK-MIB

5083 lines
132 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- sle-network-mib.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
-- Monday, April 18, 2016 at 15:57:25
--
SLE-NETWORK-MIB DEFINITIONS ::= BEGIN
IMPORTS
sleMgmt
FROM DASAN-SMI
IANAtunnelType
FROM IANAifType-MIB
InterfaceIndex
FROM IF-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
SleControlStatusType, SleControlRequestResultType
FROM SLE-TC-MIB
OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TimeTicks, IpAddress, Integer32, Unsigned32, Gauge32,
Counter64, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MacAddress
FROM SNMPv2-TC;
sleNetwork MODULE-IDENTITY
LAST-UPDATED "200412291441Z" -- December 29, 2004 at 14:41 GMT
ORGANIZATION
"HANASOFT"
CONTACT-INFO
" "
DESCRIPTION
"This MIB contains all needed informations about DHCP and
all supported sle DHCP features."
REVISION "200412101632Z" -- December 10, 2004 at 16:32 GMT
DESCRIPTION
"Description"
::= { sleMgmt 11 }
--
-- Node definitions
--
sleNetInterface OBJECT IDENTIFIER ::= { sleNetwork 1 }
sleNetIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleNetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleNetInterface 1 }
sleNetIfEntry OBJECT-TYPE
SYNTAX SleNetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex }
::= { sleNetIfTable 1 }
SleNetIfEntry ::=
SEQUENCE {
sleNetIfIndex
Integer32,
sleNetIfName
OCTET STRING,
sleNetIfDescription
OCTET STRING,
sleNetIfTableIndex
InterfaceIndex,
sleNetIfRegState
INTEGER,
sleNetIfAdminState
INTEGER,
sleNetIfOperState
INTEGER,
sleNetIfMulticast
INTEGER,
sleNetIfMtu
INTEGER,
sleNetIfIpSetMode
INTEGER,
sleNetIfIpMartianFilter
INTEGER,
sleNetIfUpCnt
Integer32,
sleNetIfDownCnt
Integer32,
sleNetIfLinkUpTime
Counter64,
sleNetIfElapsedTimeAfterClearStats
Counter64,
sleNetIfBindingVRFName
OCTET STRING,
sleNetIfOnFailUseVRF
INTEGER,
sleNetIfIpUnreachability
INTEGER,
sleNetIfipRedirects
INTEGER,
sleNetIfIpForwarding
INTEGER,
sleNetIfAlias
OCTET STRING,
sleNetIfIpArpAlias
INTEGER,
sleNetIfIpArpAliasMac
MacAddress,
sleNetIfArpMCProbeCount
Integer32,
sleNetIfArpUCProbeCount
Integer32,
sleNetIfArpRetransTime
Integer32,
sleNetIfIpProxyArp
INTEGER,
sleNetIfIpRPFilter
INTEGER,
sleNetIfRPFilter
INTEGER,
sleNetIfRouteMap
OCTET STRING
}
sleNetIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..11023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Network interface index
0 : any(all)
1..4094 : VLAN
4095 : management
4096 : loopback
4097 : NULL device
10000..11023: Tunnel interface index
"
::= { sleNetIfEntry 1 }
sleNetIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Name of this Interface."
::= { sleNetIfEntry 2 }
sleNetIfDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of this interface."
::= { sleNetIfEntry 3 }
sleNetIfTableIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Same as ifIndex (for appropriated ifTable entries)."
::= { sleNetIfEntry 4 }
sleNetIfRegState OBJECT-TYPE
SYNTAX INTEGER
{
unregistered(0),
registered(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Registered state of Network device."
::= { sleNetIfEntry 5 }
sleNetIfAdminState OBJECT-TYPE
SYNTAX INTEGER
{
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administrative state.
down - shutdown
up - noshutdown"
::= { sleNetIfEntry 6 }
sleNetIfOperState OBJECT-TYPE
SYNTAX INTEGER
{
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state.
down - shutdown or not running
up - running"
::= { sleNetIfEntry 7 }
sleNetIfMulticast OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast enable/disable state."
::= { sleNetIfEntry 8 }
sleNetIfMtu OBJECT-TYPE
SYNTAX INTEGER (64..17940)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Transmission Unit."
::= { sleNetIfEntry 9 }
sleNetIfIpSetMode OBJECT-TYPE
SYNTAX INTEGER
{
static(0),
dynamic(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address setting mode.
0 : static
1 : dynamic (by DHCP client)
"
::= { sleNetIfEntry 10 }
sleNetIfIpMartianFilter OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfEntry 11 }
sleNetIfUpCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of link-up event."
::= { sleNetIfEntry 12 }
sleNetIfDownCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of link-down event."
::= { sleNetIfEntry 13 }
sleNetIfLinkUpTime OBJECT-TYPE
SYNTAX Counter64
UNITS "1 sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time after link is up."
::= { sleNetIfEntry 14 }
sleNetIfElapsedTimeAfterClearStats OBJECT-TYPE
SYNTAX Counter64
UNITS "1 sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time after clearing status."
::= { sleNetIfEntry 15 }
sleNetIfBindingVRFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRF name that this tunnel interface is binding."
::= { sleNetIfEntry 16 }
sleNetIfOnFailUseVRF OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lookup into a global routing table when the VRF routing table lookup was failed."
::= { sleNetIfEntry 17 }
sleNetIfIpUnreachability OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP unreachability ON/OFF
"
DEFVAL { 1 }
::= { sleNetIfEntry 18 }
sleNetIfipRedirects OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfEntry 19 }
sleNetIfIpForwarding OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP forwarding status"
::= { sleNetIfEntry 20 }
sleNetIfAlias OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"lias Name for the Interface"
::= { sleNetIfEntry 21 }
sleNetIfIpArpAlias OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Arp Alias state"
::= { sleNetIfEntry 22 }
sleNetIfIpArpAliasMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Arp Alias MAC"
::= { sleNetIfEntry 23 }
sleNetIfArpMCProbeCount OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ARP request Multicast probe count"
::= { sleNetIfEntry 24 }
sleNetIfArpUCProbeCount OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ARP request Unicast probe count"
::= { sleNetIfEntry 25 }
sleNetIfArpRetransTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retrans time of ARP request (unit: 1s)"
::= { sleNetIfEntry 26 }
sleNetIfIpProxyArp OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Proxy Arp state"
::= { sleNetIfEntry 27 }
sleNetIfIpRPFilter OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
loose(1),
strict(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Reverse Path Filtering of CPU"
::= { sleNetIfEntry 28 }
sleNetIfRPFilter OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
loose(1),
strict(2),
looseAllow(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reverse Path Filtering of CHIP (default : looseAllow)"
::= { sleNetIfEntry 29 }
sleNetIfRouteMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Policy route-map name"
::= { sleNetIfEntry 30 }
sleNetIfControl OBJECT IDENTIFIER ::= { sleNetInterface 2 }
sleNetIfControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setNetIfRegState(1),
setNetIfProfile(2),
setNetIfIpMartianFilter(3),
setNetIfBindingVRF(4),
unsetNetIfBindingVRF(5),
setNetIfOnFailUseVRF(6),
setNetIfIpUnreachability(7),
setNetIfIpRedirects(8),
setNetIfIpForwarding(9),
setAlias(10),
setIpArpAlias(11),
setArpMCProbeCount(12),
setArpUCProbeCount(13),
setArpRetransTime(14),
setIpProxyArp(15),
setIpRPFilter(16),
setRPFilter(17),
setRouteMap(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
DEFVAL { setNetIfProfile }
::= { sleNetIfControl 1 }
sleNetIfControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleNetIfControl 2 }
sleNetIfControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
DEFVAL { 0 }
::= { sleNetIfControl 3 }
sleNetIfControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleNetIfControl 4 }
sleNetIfControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleNetIfControl 5 }
sleNetIfControlIndex OBJECT-TYPE
SYNTAX Integer32 (0..11023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network interface index
0 : any(all)
1..4094 : VLAN
4095 : management
4096 : loopback
4097 : NULL device
10000..11023: Tunnel interface index"
::= { sleNetIfControl 6 }
sleNetIfControlDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description of this interface."
DEFVAL { "" }
::= { sleNetIfControl 7 }
sleNetIfControlRegState OBJECT-TYPE
SYNTAX INTEGER
{
unregister(0),
register(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfControl 8 }
sleNetIfControlAdminState OBJECT-TYPE
SYNTAX INTEGER
{
down(0),
up(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state."
DEFVAL { up }
::= { sleNetIfControl 9 }
sleNetIfControlMulticast OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast enable/disable state."
DEFVAL { enable }
::= { sleNetIfControl 10 }
sleNetIfControlMtu OBJECT-TYPE
SYNTAX INTEGER (64..17940)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Transmission Unit."
DEFVAL { 1500 }
::= { sleNetIfControl 11 }
sleNetIfControlIpMartianFilter OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfControl 12 }
sleNetIfControlBindingVRFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VRF name that this tunnel interface is binding."
::= { sleNetIfControl 13 }
sleNetIfControlOnFailUseVRF OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lookup into a global routing table when the VRF routing table lookup was failed."
::= { sleNetIfControl 14 }
sleNetIfControlIpUnreachability OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP unreachability ON/OFF"
DEFVAL { 1 }
::= { sleNetIfControl 15 }
sleNetIfControlIpRedirects OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfControl 16 }
sleNetIfControlIpForwarding OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP forwarding status"
::= { sleNetIfControl 17 }
sleNetIfControlAlias OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Alias Name for the Interface"
::= { sleNetIfControl 18 }
sleNetIfControlIpArpAlias OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Arp Alias state"
::= { sleNetIfControl 19 }
sleNetIfControlIpArpAliasMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Arp Alias MAC"
::= { sleNetIfControl 20 }
sleNetIfControlArpMCProbeCount OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ARP request Multicast probe count"
::= { sleNetIfControl 21 }
sleNetIfControlArpUCProbeCount OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ARP request Unicast probe count"
::= { sleNetIfControl 22 }
sleNetIfControlArpRetransTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retrans time of ARP request (unit: 1s)"
::= { sleNetIfControl 23 }
sleNetIfControlIpProxyArp OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Proxy Arp state"
::= { sleNetIfControl 24 }
sleNetIfControlIpRPFilter OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
loose(1),
strict(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Reverse Path Filtering of CPU"
::= { sleNetIfControl 25 }
sleNetIfControlRPFilter OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
loose(1),
strict(2),
looseAllow(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reverse Path Filtering of CHIP (default : looseAllow)"
::= { sleNetIfControl 26 }
sleNetIfControlRouteMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Policy route-map name"
::= { sleNetIfControl 27 }
sleNetIfNotification OBJECT IDENTIFIER ::= { sleNetInterface 3 }
sleNetIfRegStateChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfRegState }
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfNotification 1 }
sleNetIfProfileChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfDescription, sleNetIfAdminState,
sleNetIfMulticast, sleNetIfMtu }
STATUS current
DESCRIPTION
"setNetIfProfile."
::= { sleNetIfNotification 2 }
sleNetIfIpMartianFilterChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlIndex, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIpMartianFilter
}
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfNotification 3 }
sleNetIfBindingVRFSet NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlBindingVRFName
}
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfNotification 4 }
sleNetIfBindingVRFUnset NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlBindingVRFName
}
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfNotification 5 }
sleNetIfIpOnFailUseVRFChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlOnFailUseVRF
}
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfNotification 6 }
sleNetIfIpUnreachabilityChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpUnreachability
}
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfNotification 7 }
sleNetIfIpRedirectsChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIpRedirects }
STATUS current
DESCRIPTION
"Description."
::= { sleNetIfNotification 8 }
sleNetIfIpForwardingChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpForwarding
}
STATUS current
DESCRIPTION
"setNetIfIpForwarding"
::= { sleNetIfNotification 9 }
sleNetIfAliasChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlAlias
}
STATUS current
DESCRIPTION
"setAlias"
::= { sleNetIfNotification 10 }
sleNetIfIpArpAliasChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpArpAlias,
sleNetIfControlIpArpAliasMac }
STATUS current
DESCRIPTION
"setIpArpAlias"
::= { sleNetIfNotification 11 }
sleNetIfArpMCProbeCountChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlArpMCProbeCount
}
STATUS current
DESCRIPTION
"setArpMCProbeCount"
::= { sleNetIfNotification 12 }
sleNetIfArpUCProbeCountChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlArpUCProbeCount
}
STATUS current
DESCRIPTION
"setArpUCProbeCount"
::= { sleNetIfNotification 13 }
sleNetIfArpRetransTimeChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlArpRetransTime
}
STATUS current
DESCRIPTION
"setArpRetransTime"
::= { sleNetIfNotification 14 }
sleNetIfIpProxyArpChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpProxyArp
}
STATUS current
DESCRIPTION
"setIpProxyArp"
::= { sleNetIfNotification 15 }
sleNetIfIpRPFilterChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpRPFilter
}
STATUS current
DESCRIPTION
"setIpRPFilter"
::= { sleNetIfNotification 16 }
sleNetIfRPFilterChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlRPFilter
}
STATUS current
DESCRIPTION
"setRPFilter"
::= { sleNetIfNotification 17 }
sleNetIfRouteMapChanged NOTIFICATION-TYPE
OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlRouteMap
}
STATUS current
DESCRIPTION
"setRouteMap"
::= { sleNetIfNotification 18 }
sleIpAddress OBJECT IDENTIFIER ::= { sleNetwork 2 }
sleIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleIpAddress 1 }
sleIpAddrEntry OBJECT-TYPE
SYNTAX SleIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex, sleIpAddrValue }
::= { sleIpAddrTable 1 }
SleIpAddrEntry ::=
SEQUENCE {
sleIpAddrValue
IpAddress,
sleIpAddrMask
Integer32,
sleIpAddrBcast
IpAddress,
sleIpAddrFlag
BITS,
sleIpAddrScope
INTEGER,
sleIpAddrIpIndex
INTEGER,
sleIpAddrUnnumUsedIp
INTEGER
}
sleIpAddrValue OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing information pertains."
::= { sleIpAddrEntry 1 }
sleIpAddrMask OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this entry.
The value of the mask is an IP address with all the network
bits set to 1 and all the hosts bits set to 0."
::= { sleIpAddrEntry 2 }
sleIpAddrBcast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the least-significant bit in the IP broadcast
address used for sending datagrams on the (logical)
interface associated with the IP address of this entry.
For example, when the Internet standard all-ones broadcast
address is used, the value will be 1. This value applies
to both the subnet and network broadcasts addresses used
by the entity on this (logical) interface."
::= { sleIpAddrEntry 3 }
sleIpAddrFlag OBJECT-TYPE
SYNTAX BITS
{
permanent(0),
tentative(1),
deprecated(2),
reserved3(3),
reserved4(4),
reserved5(5),
reserved6(6),
secondary(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleIpAddrEntry 4 }
sleIpAddrScope OBJECT-TYPE
SYNTAX INTEGER
{
global(0),
site(200),
link(253),
host(254),
nowhere(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleIpAddrEntry 5 }
sleIpAddrIpIndex OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ip index for Interface Unnumbered feature enhanced.
If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
Interface unnumbered default setting - it get primary ip address.
Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
(cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
::= { sleIpAddrEntry 6 }
sleIpAddrUnnumUsedIp OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
used(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Check a specific IP address for using interface unnumbered feature."
::= { sleIpAddrEntry 7 }
sleIpAddrControl OBJECT IDENTIFIER ::= { sleIpAddress 2 }
sleIpAddrControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createIpAddress(1),
destroyIpAddress(2),
addIpIndex(3),
delIpIndex(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleIpAddrControl 1 }
sleIpAddrControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleIpAddrControl 2 }
sleIpAddrControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
DEFVAL { 0 }
::= { sleIpAddrControl 3 }
sleIpAddrControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleIpAddrControl 4 }
sleIpAddrControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleIpAddrControl 5 }
sleIpAddrControlNetIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094 | 10000..11023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network interface index
1..4094 : VLAN
10000..11023: Tunnel interface index
"
DEFVAL { 1 }
::= { sleIpAddrControl 6 }
sleIpAddrControlValue OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing information pertains."
DEFVAL { 'ac106464'h }
::= { sleIpAddrControl 7 }
sleIpAddrControlMask OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this entry. "
DEFVAL { 24 }
::= { sleIpAddrControl 8 }
sleIpAddrControlFlag OBJECT-TYPE
SYNTAX INTEGER
{
primary(0),
secondary(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { primary }
::= { sleIpAddrControl 9 }
sleIpAddrControlScope OBJECT-TYPE
SYNTAX INTEGER
{
global(0),
link(253),
host(254)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { global }
::= { sleIpAddrControl 10 }
sleIpAddrControlIpIndex OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ip index for Interface Unnumbered feature enhanced.
If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
Interface unnumbered default setting - it get primary ip address.
Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
(cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
::= { sleIpAddrControl 11 }
sleIpAddrNotification OBJECT IDENTIFIER ::= { sleIpAddress 3 }
sleIpAddressCreated NOTIFICATION-TYPE
OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrMask, sleIpAddrFlag,
sleIpAddrScope }
STATUS current
DESCRIPTION
"createIpAddress."
::= { sleIpAddrNotification 1 }
sleIpAddressDestroyed NOTIFICATION-TYPE
OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrMask }
STATUS current
DESCRIPTION
"destroyIpAddress."
::= { sleIpAddrNotification 2 }
sleIpAddressIpIndexAdded NOTIFICATION-TYPE
OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrControlNetIfIndex, sleIpAddrControlValue,
sleIpAddrControlMask, sleIpAddrControlIpIndex }
STATUS current
DESCRIPTION
"addIpIndex"
::= { sleIpAddrNotification 3 }
sleIpAddressIpIndexDeleted NOTIFICATION-TYPE
OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrControlNetIfIndex, sleIpAddrControlIpIndex
}
STATUS current
DESCRIPTION
"delIpIndex"
::= { sleIpAddrNotification 4 }
sleArp OBJECT IDENTIFIER ::= { sleNetwork 3 }
sleArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleArp 1 }
sleArpEntry OBJECT-TYPE
SYNTAX SleArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex, sleArpIpAddress }
::= { sleArpTable 1 }
SleArpEntry ::=
SEQUENCE {
sleArpIpAddress
IpAddress,
sleArpPhyAddress
MacAddress,
sleArpPortIndex
Integer32,
sleArpState
INTEGER,
sleArpHwType
INTEGER,
sleArpHwUsed
INTEGER,
sleArpUsedTime
INTEGER
}
sleArpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NetworkAddress (e.g., the IP address) corresponding
to the media-dependent `physical' address."
::= { sleArpEntry 1 }
sleArpPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The media-dependent `physical' address."
::= { sleArpEntry 2 }
sleArpPortIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on which this entry's equivalence is effective.
0: for any ports."
::= { sleArpEntry 3 }
sleArpState OBJECT-TYPE
SYNTAX INTEGER
{
static(0),
dynamic(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Arp entry's currently status."
::= { sleArpEntry 4 }
sleArpHwType OBJECT-TYPE
SYNTAX INTEGER { ethernet(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware Type of media."
::= { sleArpEntry 5 }
sleArpHwUsed OBJECT-TYPE
SYNTAX INTEGER
{
nonused(0),
used(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Arp entry's currently chip usage state."
::= { sleArpEntry 6 }
sleArpUsedTime OBJECT-TYPE
SYNTAX INTEGER (1..10000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Arp entry's chip used time.(if sleArpState is 0, always 0 and if sleArpHwUsed is 0, always 0.)"
::= { sleArpEntry 7 }
sleArpControl OBJECT IDENTIFIER ::= { sleArp 2 }
sleArpControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createArpEntry(1),
destroyArpEntry(2),
clearArpTable(3),
clearArpTableByAddr(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleArpControl 1 }
sleArpControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleArpControl 2 }
sleArpControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
::= { sleArpControl 3 }
sleArpControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleArpControl 4 }
sleArpControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleArpControl 5 }
sleArpControlNetIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network interface index."
::= { sleArpControl 6 }
sleArpControlIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NetworkAddress (e.g., the IP address) corresponding
to the media-dependent `physical' address."
::= { sleArpControl 7 }
sleArpControlPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The media-dependent `physical' address."
::= { sleArpControl 8 }
sleArpControlState OBJECT-TYPE
SYNTAX INTEGER
{
static(0),
dynamic(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Arp entry's currently status."
::= { sleArpControl 9 }
sleArpControlMask OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleArpControl 10 }
sleArpNotification OBJECT IDENTIFIER ::= { sleArp 3 }
sleArpEntryCreated NOTIFICATION-TYPE
OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpPhyAddress }
STATUS current
DESCRIPTION
"createArpEntry."
::= { sleArpNotification 1 }
sleArpEntryDestroyed NOTIFICATION-TYPE
OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpPhyAddress }
STATUS current
DESCRIPTION
"destroyArpEntry."
::= { sleArpNotification 2 }
sleArpTableCleared NOTIFICATION-TYPE
OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpState }
STATUS current
DESCRIPTION
"clearArpTable.
In this notification PDU, key of sleArpState
is ifindex.0.0.0.0."
::= { sleArpNotification 3 }
sleArpTableClearedByAddr NOTIFICATION-TYPE
OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpControlIpAddress, sleArpControlMask,
sleArpControlState }
STATUS current
DESCRIPTION
"clearArpTableByAddr"
::= { sleArpNotification 4 }
sleRoute OBJECT IDENTIFIER ::= { sleNetwork 4 }
sleRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleRoute 1 }
sleRouteEntry OBJECT-TYPE
SYNTAX SleRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleRouteDstAddress, sleRouteDstMask, sleRouteGateway, sleRouteInterface, sleRouteVRFIndex
}
::= { sleRouteTable 1 }
SleRouteEntry ::=
SEQUENCE {
sleRouteDstAddress
IpAddress,
sleRouteDstMask
INTEGER,
sleRouteGateway
IpAddress,
sleRouteInterface
INTEGER,
sleRouteType
INTEGER,
sleRouteProto
INTEGER,
sleRouteMetric
INTEGER,
sleRouteActive
INTEGER,
sleRouteBindingSrcAddr
IpAddress,
sleRouteDistance
INTEGER,
sleRouteSubtype
INTEGER,
sleRouteNexthopStatus
BITS,
sleRouteRibStatus
BITS,
sleRouteVRFIndex
Integer32
}
sleRouteDstAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route.
An entry with a value of 0.0.0.0 is considered a default route.
Multiple routes to a single destination can appear in the table,
but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use."
::= { sleRouteEntry 1 }
sleRouteDstMask OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the destination address
before being compared to the value in the sleRouteDstAddress field.
For those systems that do not support arbitrary subnet masks,
an agent constructs the value of the sleRouteDstMask
by determining whether the value of the correspondent sleRouteDstAddress field
belong to a class-A, B, or C network.
If the value of the sleRouteDstAddress is 0.0.0.0 (a default route),
then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism."
::= { sleRouteEntry 2 }
sleRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Gateway IP Address.
0.0.0.0/0 : indicate default gateway or invalid"
::= { sleRouteEntry 3 }
sleRouteInterface OBJECT-TYPE
SYNTAX INTEGER (0..11023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value which uniquely identifies
the local interface through
which the next hop of this route
should be reached.
The interface identified by a particular
value of this index is the same interface
as identified by the same value of
sleNetIfIndex.
Network interface index
0: invalid
1..4094: VLAN
4095: management
4096: loopback
4097: NULL device
10000..11023: Tunnel interface index"
::= { sleRouteEntry 4 }
sleRouteType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
invalid(2),
direct(3),
indirect(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of route.
Note that the values direct and indirect refer to the notion of direct
and indirect routing in the IP architecture.
Setting this object to the value invalid has the effect of invalidating the corresponding entry
in the sleRouteTable object.
That is, it effectively dissasociates the destination identified
with said entry from the route identified with said entry.
It is an implementation-specific matter as to whether the agent removes an invalidated entry
from the table. Accordingly,
management stations must be prepared to receive tabular information
from agents that corresponds to entries not currently in use.
Proper interpretation of such entries requires examination of the relevant sleRouteType object."
::= { sleRouteEntry 5 }
sleRouteProto OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
localDirect(2),
netmgmtStatic(3),
icmp(4),
egp(5),
ggp(6),
hello(7),
rip(8),
isIs(9),
esIs(10),
ciscoIgrp(11),
bbnSpfIgp(12),
ospf(13),
bgp(14),
idpr(15),
ciscoEigrp(16),
dhcp(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this route was learned.
Inclusion of values for gateway routing protocols is not intended to imply
that hosts should support those protocols."
::= { sleRouteEntry 6 }
sleRouteMetric OBJECT-TYPE
SYNTAX INTEGER (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary routing metric for this route.
The semantics of this metric are determined
by the routing-protocol specified
in the route's sleRouteProto value.
If this metric is not used,
its value should be set to -1."
::= { sleRouteEntry 7 }
sleRouteActive OBJECT-TYPE
SYNTAX INTEGER
{
inactive(0),
active(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active status for this routing entry."
::= { sleRouteEntry 8 }
sleRouteBindingSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binding source IP Address for this route."
::= { sleRouteEntry 9 }
sleRouteDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Distance value for this route."
::= { sleRouteEntry 10 }
sleRouteSubtype OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
ospfIa(1),
ospfNssa1(2),
ospfNssa2(3),
ospfExternal1(4),
ospfExternal2(5),
isisL1(8),
isisL2(9),
isisIa(10),
bgpMpls(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subtype of this route."
::= { sleRouteEntry 11 }
sleRouteNexthopStatus OBJECT-TYPE
SYNTAX BITS
{
active(0),
fib(1),
recursive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nexthop status of this route."
::= { sleRouteEntry 12 }
sleRouteRibStatus OBJECT-TYPE
SYNTAX BITS
{
internal(0),
selfroute(1),
blackhole(2),
nonfib(3),
selected(4),
changed(5),
static(6),
stale(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rib status for this route."
::= { sleRouteEntry 13 }
sleRouteVRFIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRF index in sleIpVRFTable."
::= { sleRouteEntry 14 }
sleRouteControl OBJECT IDENTIFIER ::= { sleRoute 2 }
sleRouteControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createStaticRoute(1),
destroyStaticRoute(2),
setStaticRouteProfile(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleRouteControl 1 }
sleRouteControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleRouteControl 2 }
sleRouteControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
::= { sleRouteControl 3 }
sleRouteControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleRouteControl 4 }
sleRouteControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleRouteControl 5 }
sleRouteControlDstAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address of this route.
An entry with a value of 0.0.0.0 is considered a default route.
Multiple routes to a single destination can appear in the table,
but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use."
::= { sleRouteControl 6 }
sleRouteControlDstMask OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the destination address
before being compared to the value in the sleRouteDstAddress field.
For those systems that do not support arbitrary subnet masks,
an agent constructs the value of the sleRouteDstMask
by determining whether the value of the correspondent sleRouteDstAddress field
belong to a class-A, B, or C network.
If the value of the sleRouteDstAddress is 0.0.0.0 (a default route),
then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism."
::= { sleRouteControl 7 }
sleRouteControlGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Gateway IP Address.
0.0.0.0/0 : indicate default gateway or invalid"
::= { sleRouteControl 8 }
sleRouteControlInterface OBJECT-TYPE
SYNTAX INTEGER (0..11023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network interface index
0: invalid
1..4094: VLAN
4095: management
4096: loopback
4097: NULL device
10000..11023: Tunnel interface index
To config interface, sleRouteControlGateway have to be removed."
::= { sleRouteControl 9 }
sleRouteControlBindingSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The binding source IP Address for this route."
::= { sleRouteControl 10 }
sleRouteControlDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Distance value for this route."
DEFVAL { 1 }
::= { sleRouteControl 11 }
sleRouteControlVRFIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VRF index in sleIpVRFTable."
::= { sleRouteControl 12 }
sleRouteNotification OBJECT IDENTIFIER ::= { sleRoute 3 }
sleRouteStaticCreated NOTIFICATION-TYPE
OBJECTS { sleRouteControlRequest, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
sleRouteControlGateway, sleRouteControlInterface, sleRouteControlBindingSrcAddr, sleRouteControlDistance, sleRouteControlVRFIndex
}
STATUS current
DESCRIPTION
"createStaticRoute"
::= { sleRouteNotification 1 }
sleRouteStaticDestroyed NOTIFICATION-TYPE
OBJECTS { sleRouteControlRequest, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
sleRouteControlGateway, sleRouteControlInterface, sleRouteControlVRFIndex }
STATUS current
DESCRIPTION
"destroyStaticRoute"
::= { sleRouteNotification 2 }
sleRouteStaticProfileChanged NOTIFICATION-TYPE
OBJECTS { sleRouteControlRequest, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
sleRouteControlGateway, sleRouteControlInterface, sleRouteControlBindingSrcAddr, sleRouteControlDistance, sleRouteControlVRFIndex
}
STATUS current
DESCRIPTION
"setStaticRouteProfile"
::= { sleRouteNotification 3 }
sleDhcpClient OBJECT IDENTIFIER ::= { sleNetwork 5 }
sleDhcpClTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleDhcpClEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleDhcpClient 1 }
sleDhcpClEntry OBJECT-TYPE
SYNTAX SleDhcpClEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex }
::= { sleDhcpClTable 1 }
SleDhcpClEntry ::=
SEQUENCE {
sleDhcpClMode
INTEGER,
sleDhcpClIpAddr
IpAddress,
sleDhcpClNetmask
IpAddress,
sleDhcpClGateway
IpAddress,
sleDhcpClDnsServer
IpAddress,
sleDhcpClServer
IpAddress,
sleDhcpClClientId
OCTET STRING,
sleDhcpClClientIdStyle
INTEGER,
sleDhcpClClassId
OCTET STRING,
sleDhcpClClassIdStyle
INTEGER,
sleDhcpClLeasetime
Integer32,
sleDhcpClState
INTEGER
}
sleDhcpClMode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Client activity state in this interface."
DEFVAL { disable }
::= { sleDhcpClEntry 1 }
sleDhcpClIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address acquired by DHCP Client active in this interface."
::= { sleDhcpClEntry 2 }
sleDhcpClNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address acquired by DHCP Client.
The value of the mask is an IP address with all the network
bits set to 1 and all the hosts bits set to 0."
::= { sleDhcpClEntry 3 }
sleDhcpClGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Gateway's IP address acquired by DHCP Client active in this interface."
::= { sleDhcpClEntry 4 }
sleDhcpClDnsServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS server's IP address acquired by DHCP Client active in this interface."
::= { sleDhcpClEntry 5 }
sleDhcpClServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Server's IP address."
::= { sleDhcpClEntry 6 }
sleDhcpClClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Client-identifier value.
This is used by DHCP clients to specify their unique identifier.
DHCP servers use this value to index their database of address bindings.
This value is expected to be unique for all clients in an administrative domain."
::= { sleDhcpClEntry 7 }
sleDhcpClClientIdStyle OBJECT-TYPE
SYNTAX INTEGER
{
ascii(0),
hex(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Client-identifier input style.
0 : ascii string format
1 : hexadecimal format"
DEFVAL { ascii }
::= { sleDhcpClEntry 8 }
sleDhcpClClassId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Class identifier value.
This is used by DHCP clients to optionally identify the vendor
type and configuration of a DHCP client.
The information is a string of n octets, interpreted by servers.
Vendors may choose to define specific vendor class identifiers
to convey particular configuration or other identification
information about a client.
For example, the identifier may encode the client's hardware configuration."
::= { sleDhcpClEntry 9 }
sleDhcpClClassIdStyle OBJECT-TYPE
SYNTAX INTEGER
{
ascii(0),
hex(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Class identifier input style.
0 : ascii string format
1 : hexadecimal format"
DEFVAL { ascii }
::= { sleDhcpClEntry 10 }
sleDhcpClLeasetime OBJECT-TYPE
SYNTAX Integer32 (120..2147483637)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The leased time for IP address acquired by DHCP Client.
Default lease-time: 3600s"
DEFVAL { 3600 }
::= { sleDhcpClEntry 11 }
sleDhcpClState OBJECT-TYPE
SYNTAX INTEGER
{
halt(0),
init(1),
request(3),
bound(4),
renew(5),
rebind(6),
nonactive(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating status of DHCP Client."
DEFVAL { non-active }
::= { sleDhcpClEntry 12 }
sleDhcpClControl OBJECT IDENTIFIER ::= { sleDhcpClient 2 }
sleDhcpClControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setDhcpClMode(1),
setDhcpClProfile(2),
changeDhcpClState(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleDhcpClControl 1 }
sleDhcpClControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleDhcpClControl 2 }
sleDhcpClControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
::= { sleDhcpClControl 3 }
sleDhcpClControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleDhcpClControl 4 }
sleDhcpClControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleDhcpClControl 5 }
sleDhcpClControlNetIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network Interface Index."
DEFVAL { 1 }
::= { sleDhcpClControl 6 }
sleDhcpClControlMode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Client activity state in this interface."
DEFVAL { disable }
::= { sleDhcpClControl 7 }
sleDhcpClControlClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Client-identifier value.
This is used by DHCP clients to specify their unique identifier.
DHCP servers use this value to index their database of address bindings.
This value is expected to be unique for all clients in an administrative domain."
::= { sleDhcpClControl 8 }
sleDhcpClControlClientIdStyle OBJECT-TYPE
SYNTAX INTEGER
{
ascii(0),
hex(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Client-identifier input style.
0 : ascii string format
1 : hexadecimal format"
DEFVAL { ascii }
::= { sleDhcpClControl 9 }
sleDhcpClControlClassId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Class identifier value.
This is used by DHCP clients to optionally identify the vendor
type and configuration of a DHCP client.
The information is a string of n octets, interpreted by servers.
Vendors may choose to define specific vendor class identifiers
to convey particular configuration or other identification
information about a client.
For example, the identifier may encode the client's hardware configuration."
::= { sleDhcpClControl 10 }
sleDhcpClControlClassIdStyle OBJECT-TYPE
SYNTAX INTEGER
{
ascii(0),
hex(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Class identifier input style.
0 : ascii string format
1 : hexadecimal format"
DEFVAL { ascii }
::= { sleDhcpClControl 11 }
sleDhcpClControlLeasetime OBJECT-TYPE
SYNTAX Integer32 (120..2147483637)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The leased time for IP address acquired by DHCP Client.
Default lease-time: 3600s"
DEFVAL { 3600 }
::= { sleDhcpClControl 12 }
sleDhcpClControlUpdateIP OBJECT-TYPE
SYNTAX INTEGER
{
remain(0),
renew(1),
release(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Update DHCP client operating status.
0 : default
1 : renew
2 : release
"
DEFVAL { remain }
::= { sleDhcpClControl 13 }
sleDhcpClNotification OBJECT IDENTIFIER ::= { sleDhcpClient 3 }
sleDhcpClModeChanged NOTIFICATION-TYPE
OBJECTS { sleDhcpClControlRequest, sleDhcpClControlTimeStamp, sleDhcpClControlReqResult, sleDhcpClMode }
STATUS current
DESCRIPTION
"setDhcpClMode."
::= { sleDhcpClNotification 1 }
sleDhcpClProfileChanged NOTIFICATION-TYPE
OBJECTS { sleDhcpClControlRequest, sleDhcpClControlTimeStamp, sleDhcpClControlReqResult, sleDhcpClClientId, sleDhcpClClientIdStyle,
sleDhcpClClassId, sleDhcpClClassIdStyle, sleDhcpClLeasetime }
STATUS current
DESCRIPTION
"setDhcpClProfile."
::= { sleDhcpClNotification 2 }
sleDhcpClStateChanged NOTIFICATION-TYPE
OBJECTS { sleDhcpClControlRequest, sleDhcpClControlTimeStamp, sleDhcpClControlReqResult, sleDhcpClState }
STATUS current
DESCRIPTION
"ChangeDhcpClState."
::= { sleDhcpClNotification 3 }
sleV2DhcpClient OBJECT IDENTIFIER ::= { sleNetwork 6 }
sleNetworkBase OBJECT IDENTIFIER ::= { sleNetwork 7 }
sleNetworkBaseInfo OBJECT IDENTIFIER ::= { sleNetworkBase 1 }
sleNetworkArpAgingTime OBJECT-TYPE
SYNTAX INTEGER (10..2147483637)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System Arp Aging Time"
::= { sleNetworkBaseInfo 1 }
sleNetworkBaseVrfDynamicForwardBinding OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
vrrp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseInfo 2 }
sleNetworkBaseControl OBJECT IDENTIFIER ::= { sleNetworkBase 2 }
sleNetworkControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setArpProfile(1),
setVrfForwdDynamicStatus(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseControl 1 }
sleNetworkControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseControl 2 }
sleNetworkControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseControl 3 }
sleNetworkControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseControl 4 }
sleNetworkControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseControl 5 }
sleNetworkControlArpAgingTime OBJECT-TYPE
SYNTAX INTEGER (10..2147483637)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseControl 6 }
sleNetworkControlVrfDynamicForwardBinding OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
vrrp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseControl 7 }
sleNetworkBaseNotification OBJECT IDENTIFIER ::= { sleNetworkBase 3 }
sleNetworkArpProfileChanged NOTIFICATION-TYPE
OBJECTS { sleNetworkControlRequest, sleNetworkControlReqResult, sleNetworkControlTimeStamp, sleNetworkArpAgingTime }
STATUS current
DESCRIPTION
"Description."
::= { sleNetworkBaseNotification 1 }
sleTunnel OBJECT IDENTIFIER ::= { sleNetwork 8 }
sleTunnelIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleTunnelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleTunnel 1 }
sleTunnelIfEntry OBJECT-TYPE
SYNTAX SleTunnelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleTunnelIfIndex }
::= { sleTunnelIfTable 1 }
SleTunnelIfEntry ::=
SEQUENCE {
sleTunnelIfIndex
Integer32,
sleTunnelIfLocalAddress
IpAddress,
sleTunnelIfRemoteAddress
IpAddress,
sleTunnelIfMode
IANAtunnelType,
sleTunnelIfTTL
Integer32,
sleTunnelIfDscpMode
INTEGER,
sleTunnelIfDscp
Integer32,
sleTunnelIfKeepaliveInterval
Integer32,
sleTunnelIfKeepaliveRetry
Integer32,
sleTunnelIfPathMtuDiscovery
INTEGER,
sleTunnelIfVRFName
OCTET STRING,
sleTunnelIfBindingPorts
OCTET STRING,
sleTunnelIfLocalAddress6
InetAddress,
sleTunnelIfRemoteAddress6
InetAddress,
sleTunnelIfChecksum
INTEGER,
sleTunnelIfDmac
MacAddress,
sleTunnelIfTos
INTEGER
}
sleTunnelIfIndex OBJECT-TYPE
SYNTAX Integer32 (10000..11023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tunnel interface index"
::= { sleTunnelIfEntry 1 }
sleTunnelIfLocalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown."
::= { sleTunnelIfEntry 2 }
sleTunnelIfRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown."
::= { sleTunnelIfEntry 3 }
sleTunnelIfMode OBJECT-TYPE
SYNTAX IANAtunnelType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation method used by the tunnel.
other(1) - none of the following
direct(2) - intermediate header
gre(3) - GRE encapsulation
minimal(4) - Minimal encapsulation
l2tp(5) - L2TP encapsulation
pptp(6) - PPTP encapsulation
l2f(7) - L2F encapsulation
udp(8) - UDP encapsulation
atmp(9) - ATMP encapsulation
msdp(10) - MSDP encapsulation
sixToFour(11) - 6to4 encapsulation
sixOverFour(12) - 6over4 encapsulation
isatap(13) - ISATAP encapsulation
teredo(14) - Teredo encapsulation
"
::= { sleTunnelIfEntry 4 }
sleTunnelIfTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTL to use in the outer IP header."
::= { sleTunnelIfEntry 5 }
sleTunnelIfDscpMode OBJECT-TYPE
SYNTAX INTEGER
{
dscpAssign(1),
dscpCopyFromPacket(2),
dscpMapFromPacket(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DiffServ field mode to use in the outer IP header.
A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
"
::= { sleTunnelIfEntry 6 }
sleTunnelIfDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The static DiffServ field value to use in the outer IP header."
::= { sleTunnelIfEntry 7 }
sleTunnelIfKeepaliveInterval OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)"
::= { sleTunnelIfEntry 8 }
sleTunnelIfKeepaliveRetry OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)"
::= { sleTunnelIfEntry 9 }
sleTunnelIfPathMtuDiscovery OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path mtu discovery on tunnel."
::= { sleTunnelIfEntry 10 }
sleTunnelIfVRFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPN Routing/Forwarding instance name."
::= { sleTunnelIfEntry 11 }
sleTunnelIfBindingPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tunnel binding ports map."
::= { sleTunnelIfEntry 12 }
sleTunnelIfLocalAddress6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel for IPv6"
::= { sleTunnelIfEntry 13 }
sleTunnelIfRemoteAddress6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel for IPv6"
::= { sleTunnelIfEntry 14 }
sleTunnelIfChecksum OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A checksum feature for the tunnel."
::= { sleTunnelIfEntry 15 }
sleTunnelIfDmac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)"
::= { sleTunnelIfEntry 16 }
sleTunnelIfTos OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header."
::= { sleTunnelIfEntry 17 }
sleTunnelIfControl OBJECT IDENTIFIER ::= { sleTunnel 2 }
sleTunnelIfControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createTunnelInterface(1),
deleteTunnelInterface(2),
setTunnelIfLocalAddress(3),
setTunnelIfRemoteAddress(4),
setTunnelIfMode(5),
setTunnelIfTTL(6),
setTunnelIfDscp(7),
setTunnelIfKeepalive(8),
setTunnelIfPathMtuDiscovery(9),
setTunnelIfVRFName(10),
unsetTunnelIfVRFName(11),
setTunnelLocalAddr6(12),
setTunnelRemoteAddr6(13),
setTunnelChecksum(14),
setTunnelDmac(15),
setTunnelTos(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleTunnelIfControl 1 }
sleTunnelIfControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleTunnelIfControl 2 }
sleTunnelIfControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
::= { sleTunnelIfControl 3 }
sleTunnelIfControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleTunnelIfControl 4 }
sleTunnelIfControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleTunnelIfControl 5 }
sleTunnelIfControlIndex OBJECT-TYPE
SYNTAX Integer32 (10000..11023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tunnel interface index"
::= { sleTunnelIfControl 6 }
sleTunnelIfControlLocalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown."
::= { sleTunnelIfControl 7 }
sleTunnelIfControlRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown."
::= { sleTunnelIfControl 8 }
sleTunnelIfControlMode OBJECT-TYPE
SYNTAX IANAtunnelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation method used by the tunnel.
other(1) - none of the following
direct(2) - intermediate header
gre(3) - GRE encapsulation
minimal(4) - Minimal encapsulation
l2tp(5) - L2TP encapsulation
pptp(6) - PPTP encapsulation
l2f(7) - L2F encapsulation
udp(8) - UDP encapsulation
atmp(9) - ATMP encapsulation
msdp(10) - MSDP encapsulation
sixToFour(11) - 6to4 encapsulation
sixOverFour(12) - 6over4 encapsulation
isatap(13) - ISATAP encapsulation
teredo(14) - Teredo encapsulation
"
::= { sleTunnelIfControl 9 }
sleTunnelIfControlTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TTL to use in the outer IP header."
::= { sleTunnelIfControl 10 }
sleTunneIflControlDscpMode OBJECT-TYPE
SYNTAX INTEGER
{
dscpAssign(1),
dscpCopyFromPacket(2),
dscpMapFromPacket(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DiffServ field mode to use in the outer IP header.
A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
"
DEFVAL { dscpCopyFromPacket }
::= { sleTunnelIfControl 11 }
sleTunneIflControlDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The static DiffServ field value to use in the outer IP header."
::= { sleTunnelIfControl 12 }
sleTunnelIfControlKeepaliveInterval OBJECT-TYPE
SYNTAX Integer32 (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)"
DEFVAL { 100 }
::= { sleTunnelIfControl 13 }
sleTunneIflControlKeepaliveRetry OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)"
DEFVAL { 3 }
::= { sleTunnelIfControl 14 }
sleTunnelIfControlPathMtuDiscovery OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Path mtu discovery on tunnel."
::= { sleTunnelIfControl 15 }
sleTunnelIfControlVRFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPN Routing/Forwarding instance name."
::= { sleTunnelIfControl 16 }
sleTunnelIfControlLocalAddress6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel for IPv6"
::= { sleTunnelIfControl 17 }
sleTunnelIfControlRemoteAddress6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel for IPv6"
::= { sleTunnelIfControl 18 }
sleTunnelIfControlChecksum OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A checksum feature for the tunnel."
::= { sleTunnelIfControl 19 }
sleTunnelIfControlDmac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)"
::= { sleTunnelIfControl 20 }
sleTunnelIfControlTos OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header."
::= { sleTunnelIfControl 21 }
sleTunnelIfNotification OBJECT IDENTIFIER ::= { sleTunnel 3 }
sleTunnelIfCreated NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex }
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 1 }
sleTunnelIfDeleted NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex }
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 2 }
sleTunnelIfLocalAddressChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlLocalAddress
}
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 3 }
sleTunnelIfRemoteAddressChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlRemoteAddress
}
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 4 }
sleTunnelIfModeChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlMode
}
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 5 }
sleTunnelIfTTLChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlTTL
}
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 6 }
sleTunnelIfDscpChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunneIflControlDscpMode,
sleTunneIflControlDscp }
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 7 }
sleTunnelIfKeepaliveChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlKeepaliveInterval,
sleTunneIflControlKeepaliveRetry }
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 8 }
sleTunnelIfPathMtuDiscoveryChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlPathMtuDiscovery
}
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 9 }
sleTunnelIfVRFNameSet NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlVRFName
}
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 10 }
sleTunnelIfVRFNameUnset NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex }
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelIfNotification 11 }
sleTunnelIfLocalAddress6Changed NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlLocalAddress6
}
STATUS current
DESCRIPTION
"setTunnelLocalAddr6"
::= { sleTunnelIfNotification 12 }
sleTunnelIfRemoteAddress6Changed NOTIFICATION-TYPE
OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlRemoteAddress6
}
STATUS current
DESCRIPTION
"setTunnelRemoteAddr6"
::= { sleTunnelIfNotification 13 }
sleTunnelAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleTunnelAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleTunnel 4 }
sleTunnelAddressEntry OBJECT-TYPE
SYNTAX SleTunnelAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleTunnelIfIndex, sleTunnelAddressValue }
::= { sleTunnelAddressTable 1 }
SleTunnelAddressEntry ::=
SEQUENCE {
sleTunnelAddressValue
IpAddress,
sleTunnelAddressMask
Integer32,
sleTunnelIpAddrBcast
IpAddress,
sleTunnelAddressFlag
BITS,
sleTunnelAddressScope
Integer32,
sleTunnelAddressUnnumIfIndex
INTEGER,
sleTunnelAddressUnnumIpIndex
INTEGER
}
sleTunnelAddressValue OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing information pertains."
::= { sleTunnelAddressEntry 1 }
sleTunnelAddressMask OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
::= { sleTunnelAddressEntry 2 }
sleTunnelIpAddrBcast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelAddressEntry 3 }
sleTunnelAddressFlag OBJECT-TYPE
SYNTAX BITS
{
permanent(0),
tentative(1),
deprecated(2),
anycast(3),
reserved1(4),
reserved2(5),
reserved3(6),
secondary(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dynamic: ~ permanent
primary : ~ secondary
anycast: this bit is available for ipv6 only.
The others are available for ipv4 only.
"
::= { sleTunnelAddressEntry 4 }
sleTunnelAddressScope OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"default : global
In linux, 200 - site
0 - global
1..252 - scopeNUM
253 - link
254 - host
255 - nowhere
"
::= { sleTunnelAddressEntry 5 }
sleTunnelAddressUnnumIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.)
(ex. br100 -> 100, br200 -> 200)"
::= { sleTunnelAddressEntry 6 }
sleTunnelAddressUnnumIpIndex OBJECT-TYPE
SYNTAX INTEGER (0 | 2..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ip index for Interface Unnumbered feature enhanced.
If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
Interface unnumbered default setting - it get primary ip address.
Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
(cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
::= { sleTunnelAddressEntry 7 }
sleTunnelAddressControl OBJECT IDENTIFIER ::= { sleTunnel 5 }
sleTunnelAddressControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createTunnelIpAddress(1),
destroyTunnelIpAddress(2),
setIfUnnumbered(3),
delIfUnnumbered(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleTunnelAddressControl 1 }
sleTunnelAddressControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleTunnelAddressControl 2 }
sleTunnelAddressControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
::= { sleTunnelAddressControl 3 }
sleTunnelAddressControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleTunnelAddressControl 4 }
sleTunnelAddressControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleTunnelAddressControl 5 }
sleTunnelAddressControlTunnelIfIndex OBJECT-TYPE
SYNTAX Integer32 (10000..11023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tunnel interface index"
::= { sleTunnelAddressControl 6 }
sleTunnelAddressControlValue OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing information pertains."
::= { sleTunnelAddressControl 7 }
sleTunnelAddressControlMask OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
::= { sleTunnelAddressControl 8 }
sleTunnelAddressControlFlag OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2),
anycast(3),
unicast(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default : primary"
DEFVAL { primary }
::= { sleTunnelAddressControl 9 }
sleTunnelAddressControlScope OBJECT-TYPE
SYNTAX INTEGER
{
global(0),
link(253),
host(254)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"default : global
not applicable : nowhere"
DEFVAL { global }
::= { sleTunnelAddressControl 10 }
sleTunnelAddressControlUnnumIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.)
(ex. br100 -> 100, br200 -> 200)"
::= { sleTunnelAddressControl 11 }
sleTunnelAddressControlUnnumIpIndex OBJECT-TYPE
SYNTAX INTEGER (0 | 2..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ip index for Interface Unnumbered feature enhanced.
If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
Interface unnumbered default setting - it get primary ip address.
Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
(cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
::= { sleTunnelAddressControl 12 }
sleTunnelAddressNotification OBJECT IDENTIFIER ::= { sleTunnel 6 }
sleTunnelAddressCreated NOTIFICATION-TYPE
OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlTunnelIfIndex, sleTunnelAddressControlValue,
sleTunnelAddressControlMask, sleTunnelAddressControlFlag, sleTunnelAddressControlScope }
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelAddressNotification 1 }
sleTunnelAddressDeleted NOTIFICATION-TYPE
OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlTunnelIfIndex, sleTunnelAddressControlValue,
sleTunnelAddressControlMask, sleTunnelAddressControlFlag }
STATUS current
DESCRIPTION
"Description."
::= { sleTunnelAddressNotification 2 }
sleTunnelAddressUnnumChanged NOTIFICATION-TYPE
OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlUnnumIfIndex, sleTunnelAddressControlUnnumIpIndex
}
STATUS current
DESCRIPTION
"setIfUnnumbered"
::= { sleTunnelAddressNotification 3 }
sleTunnelAddressUnnumDeleted NOTIFICATION-TYPE
OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlTunnelIfIndex }
STATUS current
DESCRIPTION
"delIfUnnumbered"
::= { sleTunnelAddressNotification 4 }
sleIpVRF OBJECT IDENTIFIER ::= { sleNetwork 9 }
sleIpVRFTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleIpVRFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRF 1 }
sleIpVRFEntry OBJECT-TYPE
SYNTAX SleIpVRFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleIpVRFIndex }
::= { sleIpVRFTable 1 }
SleIpVRFEntry ::=
SEQUENCE {
sleIpVRFIndex
Integer32,
sleIpVRFName
OCTET STRING,
sleIpVRFDesignatedPorts
OCTET STRING,
sleIpVRFRouterId
IpAddress,
sleIpVRFDescription
OCTET STRING
}
sleIpVRFIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRF index."
::= { sleIpVRFEntry 1 }
sleIpVRFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRF name."
::= { sleIpVRFEntry 2 }
sleIpVRFDesignatedPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port map of VRF designated-port."
::= { sleIpVRFEntry 3 }
sleIpVRFRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Router-Identifier
"
::= { sleIpVRFEntry 4 }
sleIpVRFDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of VRF.
"
::= { sleIpVRFEntry 5 }
sleIpVRFControl OBJECT IDENTIFIER ::= { sleIpVRF 2 }
sleIpVRFControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
createIpVRF(1),
deleteIpVRF(2),
setIpVRFDesignatedPorts(3),
unsetIpVRFDesignatedPorts(4),
setVRFRouterId(5),
setVRFDescription(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleIpVRFControl 1 }
sleIpVRFControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleIpVRFControl 2 }
sleIpVRFControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
::= { sleIpVRFControl 3 }
sleIpVRFControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleIpVRFControl 4 }
sleIpVRFControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleIpVRFControl 5 }
sleIpVRFControlName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VRF name"
::= { sleIpVRFControl 6 }
sleIpVRFControlDesignatedPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port map of VRF designated-port."
::= { sleIpVRFControl 7 }
sleIpVRFControlRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Router-Identifier
"
::= { sleIpVRFControl 8 }
sleIpVRFControlDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The description of VRF."
::= { sleIpVRFControl 9 }
sleIpVRFNotification OBJECT IDENTIFIER ::= { sleIpVRF 3 }
sleIpVRFCreated NOTIFICATION-TYPE
OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlName, sleIpVRFControlReqResult }
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFNotification 1 }
sleIpVRFDeleted NOTIFICATION-TYPE
OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName }
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFNotification 2 }
sleIpVRFDesignatedPortsSet NOTIFICATION-TYPE
OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlDesignatedPorts
}
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFNotification 3 }
sleIpVRFDesignatedPortsUnset NOTIFICATION-TYPE
OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlDesignatedPorts
}
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFNotification 4 }
sleIpVRFRouterIdChanged NOTIFICATION-TYPE
OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlRouterId
}
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFNotification 5 }
sleIpVRFDescriptionChanged NOTIFICATION-TYPE
OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlDescription
}
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFNotification 6 }
sleIpVRFSelectionSourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleIpVRFSelectionSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRF 4 }
sleIpVRFSelectionSourceEntry OBJECT-TYPE
SYNTAX SleIpVRFSelectionSourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleIpVRFSelectionSrcIndex }
::= { sleIpVRFSelectionSourceTable 1 }
SleIpVRFSelectionSourceEntry ::=
SEQUENCE {
sleIpVRFSelectionSrcIndex
INTEGER,
sleIpVRFSelectionSrcAddr
IpAddress,
sleIpVRFSelectionSrcMask
Integer32,
sleIpVRFSelectionSrcVRFName
OCTET STRING
}
sleIpVRFSelectionSrcIndex OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRF selection source index."
::= { sleIpVRFSelectionSourceEntry 1 }
sleIpVRFSelectionSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRF selection by source IP address."
::= { sleIpVRFSelectionSourceEntry 2 }
sleIpVRFSelectionSrcMask OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
::= { sleIpVRFSelectionSourceEntry 3 }
sleIpVRFSelectionSrcVRFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPN Routing/Forwarding instance name."
::= { sleIpVRFSelectionSourceEntry 4 }
sleIpVRFSelectionSourceControl OBJECT IDENTIFIER ::= { sleIpVRF 5 }
sleIpVRFSelectionSrcControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
setVRFSelectionSource(1),
unsetVRFSelectionSource(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command."
::= { sleIpVRFSelectionSourceControl 1 }
sleIpVRFSelectionSrcControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a user command."
::= { sleIpVRFSelectionSourceControl 2 }
sleIpVRFSelectionSrcControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum wait time for the manager for a long running user command."
::= { sleIpVRFSelectionSourceControl 3 }
sleIpVRFSelectionSrcControlTimeStamp OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleIpVRFSelectionSourceControl 4 }
sleIpVRFSelectionSrcControlReqResult OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command (end of command)."
::= { sleIpVRFSelectionSourceControl 5 }
sleIpVRFSelectionSrcControlAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VRF selection by source IP address."
::= { sleIpVRFSelectionSourceControl 6 }
sleIpVRFSelectionSrcControlMask OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
::= { sleIpVRFSelectionSourceControl 7 }
sleIpVRFSelectionSrcControlVRFName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPN Routing/Forwarding instance name."
::= { sleIpVRFSelectionSourceControl 8 }
sleIpVRFSelectionSourceNotification OBJECT IDENTIFIER ::= { sleIpVRF 6 }
sleIpVRFSelectionSrcSet NOTIFICATION-TYPE
OBJECTS { sleIpVRFSelectionSrcControlRequest, sleIpVRFSelectionSrcControlTimeStamp, sleIpVRFSelectionSrcControlReqResult, sleIpVRFSelectionSrcControlAddr, sleIpVRFSelectionSrcControlMask,
sleIpVRFSelectionSrcControlVRFName }
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFSelectionSourceNotification 1 }
sleIpVRFSelectionSrcUnset NOTIFICATION-TYPE
OBJECTS { sleIpVRFSelectionSrcControlRequest, sleIpVRFSelectionSrcControlTimeStamp, sleIpVRFSelectionSrcControlReqResult, sleIpVRFSelectionSrcControlAddr, sleIpVRFSelectionSrcControlMask,
sleIpVRFSelectionSrcControlVRFName }
STATUS current
DESCRIPTION
"Description."
::= { sleIpVRFSelectionSourceNotification 2 }
sleBFD OBJECT IDENTIFIER ::= { sleNetwork 10 }
sleBFDBase OBJECT IDENTIFIER ::= { sleBFD 1 }
sleBFDBaseInfo OBJECT IDENTIFIER ::= { sleBFDBase 1 }
sleBFDEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BFD fast-detect is enabled or disabled."
::= { sleBFDBaseInfo 1 }
sleBFDEchoEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BFD Echo function is enabled or disabled."
::= { sleBFDBaseInfo 2 }
sleBFDSlowTimer OBJECT-TYPE
SYNTAX INTEGER (1000..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BFD Slow Timer in unit of milliseconds
default: 1000(ms)"
::= { sleBFDBaseInfo 3 }
sleBFDBaseControl OBJECT IDENTIFIER ::= { sleBFDBase 2 }
sleBFDControlRequest OBJECT-TYPE
SYNTAX INTEGER { setBFDBaseProfile(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command"
::= { sleBFDBaseControl 1 }
sleBFDControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of user command."
::= { sleBFDBaseControl 2 }
sleBFDControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time for the manager for a long running user command."
::= { sleBFDBaseControl 3 }
sleBFDControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command(end of command)."
::= { sleBFDBaseControl 4 }
sleBFDControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleBFDBaseControl 5 }
sleBFDControlEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BFD fast-detect is enabled or disabled."
::= { sleBFDBaseControl 6 }
sleBFDControlEchoEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BFD Echo function is enabled or disabled."
::= { sleBFDBaseControl 7 }
sleBFDControlSlowTimer OBJECT-TYPE
SYNTAX INTEGER (1000..30000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BFD Slow Timer in unit of milliseconds
default: 1000(ms)"
::= { sleBFDBaseControl 8 }
sleBFDBaseNotification OBJECT IDENTIFIER ::= { sleBFDBase 3 }
sleBFDBaseProfileChanged NOTIFICATION-TYPE
OBJECTS { sleBFDControlRequest, sleBFDControlReqResult, sleBFDControlTimeStamp, sleBFDEnable, sleBFDEchoEnable,
sleBFDSlowTimer }
STATUS current
DESCRIPTION
"Description."
::= { sleBFDBaseNotification 1 }
sleBFDInterface OBJECT IDENTIFIER ::= { sleBFD 2 }
sleBFDInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleBFDInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleBFDInterface 1 }
sleBFDInterfaceEntry OBJECT-TYPE
SYNTAX SleBFDInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex }
::= { sleBFDInterfaceTable 1 }
SleBFDInterfaceEntry ::=
SEQUENCE {
sleBFDIfRxInterval
INTEGER,
sleBFDIfTxInterval
INTEGER,
sleBFDIfDetectMulti
INTEGER,
sleBFDIfRxIntervalIPv6
Integer32,
sleBFDIfTxIntervalIJPv6
Integer32,
sleBFDIfDetectMultiIPv6
Integer32
}
sleBFDIfRxInterval OBJECT-TYPE
SYNTAX INTEGER (50..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Required Min Rx Interval of BFD control packet in this interface.
default: 50(ms)"
::= { sleBFDInterfaceEntry 1 }
sleBFDIfTxInterval OBJECT-TYPE
SYNTAX INTEGER (50..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Required Min Tx Interval of BFD control packet in this interface.
default: 50(ms)"
::= { sleBFDInterfaceEntry 2 }
sleBFDIfDetectMulti OBJECT-TYPE
SYNTAX INTEGER (3..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detect Multi value of BFD control packet in this interface.
default: 3"
::= { sleBFDInterfaceEntry 3 }
sleBFDIfRxIntervalIPv6 OBJECT-TYPE
SYNTAX Integer32 (50..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Required Min Rx Interval of IPv6 BFD control packet in this interface.
default: 50(ms)
"
::= { sleBFDInterfaceEntry 4 }
sleBFDIfTxIntervalIJPv6 OBJECT-TYPE
SYNTAX Integer32 (50..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Required Min Tx Interval of IPv6 BFD control packet in this interface.
default: 50(ms)
"
::= { sleBFDInterfaceEntry 5 }
sleBFDIfDetectMultiIPv6 OBJECT-TYPE
SYNTAX Integer32 (3..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detect Multi value of IPv6 BFD control packet in this interface.
default: 3
"
::= { sleBFDInterfaceEntry 6 }
sleBFDInterfaceControl OBJECT IDENTIFIER ::= { sleBFDInterface 2 }
sleBFDIfControlRequest OBJECT-TYPE
SYNTAX INTEGER { setBFDIfProfile(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The request of a user command"
::= { sleBFDInterfaceControl 1 }
sleBFDIfControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of user command."
::= { sleBFDInterfaceControl 2 }
sleBFDIfControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time for the manager for a long running user command."
::= { sleBFDInterfaceControl 3 }
sleBFDIfControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last command(end of command)."
::= { sleBFDInterfaceControl 4 }
sleBFDIfControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last user command."
::= { sleBFDInterfaceControl 5 }
sleBFDIfControlNetIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..4097)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BFD Interface Index."
::= { sleBFDInterfaceControl 6 }
sleBFDIfControlRxInterval OBJECT-TYPE
SYNTAX INTEGER (50..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Required Min Rx Interval of BFD control packet in this interface.
default: 50(ms)"
::= { sleBFDInterfaceControl 7 }
sleBFDIfControlTxInterval OBJECT-TYPE
SYNTAX INTEGER (50..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Required Min Tx Interval of BFD control packet in this interface.
default: 50(ms)"
::= { sleBFDInterfaceControl 8 }
sleBFDIfControlDetectMulti OBJECT-TYPE
SYNTAX INTEGER (3..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Detect Multi value of BFD control packet in this interface.
default: 3"
::= { sleBFDInterfaceControl 9 }
sleBFDIfControlRxIntervalIPv6 OBJECT-TYPE
SYNTAX Integer32 (50..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Required Min Rx Interval of IPv6 BFD control packet in this interface.
default: 50(ms)
"
::= { sleBFDInterfaceControl 10 }
sleBFDIfControlTxIntervalIPv6 OBJECT-TYPE
SYNTAX Integer32 (50..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Required Min Tx Interval of IPv6 BFD control packet in this interface.
default: 50(ms)
"
::= { sleBFDInterfaceControl 11 }
sleBFDIfControlDetectMultiIPv6 OBJECT-TYPE
SYNTAX Integer32 (3..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Detect Multi value of IPv6 BFD control packet in this interface.
default: 3
"
::= { sleBFDInterfaceControl 12 }
sleBFDInterfaceNotification OBJECT IDENTIFIER ::= { sleBFDInterface 3 }
sleBFDIfProfileChanged NOTIFICATION-TYPE
OBJECTS { sleBFDIfControlRequest, sleBFDIfControlTimeStamp, sleBFDIfControlRxIntervalIPv6, sleBFDIfControlTxIntervalIPv6, sleBFDIfControlDetectMultiIPv6,
sleBFDIfControlReqResult, sleBFDIfRxInterval, sleBFDIfTxInterval, sleBFDIfDetectMulti }
STATUS current
DESCRIPTION
"Description."
::= { sleBFDInterfaceNotification 1 }
sleBFDSession OBJECT IDENTIFIER ::= { sleBFD 3 }
sleBFDSessionInfo OBJECT IDENTIFIER ::= { sleBFDSession 1 }
sleBFDSessionInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleBFDSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleBFDSessionInfo 1 }
sleBFDSessionInfoEntry OBJECT-TYPE
SYNTAX SleBFDSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
::= { sleBFDSessionInfoTable 1 }
SleBFDSessionInfoEntry ::=
SEQUENCE {
sleBFDSessionNeighAddrType
InetAddressType,
sleBFDSessionNeighAddrValue
InetAddress,
sleBFDSessionRegProtocols
BITS,
sleBFDSessionLocalDiscr
Unsigned32,
sleBFDSessionRemoteDiscr
Unsigned32,
sleBFDSessionDetecMultiplier
INTEGER,
sleBFDSessionStatus
INTEGER,
sleBFDSessionEchoUsage
INTEGER,
sleBFDSessionUptime
TimeTicks
}
sleBFDSessionNeighAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Neighbor Address referred to this session"
::= { sleBFDSessionInfoEntry 1 }
sleBFDSessionNeighAddrValue OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of Neighbor Address referred to this session."
::= { sleBFDSessionInfoEntry 2 }
sleBFDSessionRegProtocols OBJECT-TYPE
SYNTAX BITS
{
ospfv2(0),
ospfv3(1),
vrrp4(2),
vrrp6(3),
staticroute4(4),
staticroute6(5),
bgp(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of Neighbor Address referred to this session."
::= { sleBFDSessionInfoEntry 3 }
sleBFDSessionLocalDiscr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discriminator of this session."
::= { sleBFDSessionInfoEntry 4 }
sleBFDSessionRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discriminator of remote session neighboring this session."
::= { sleBFDSessionInfoEntry 5 }
sleBFDSessionDetecMultiplier OBJECT-TYPE
SYNTAX INTEGER (1..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detect Multiplier value which this session used.
default: 3"
::= { sleBFDSessionInfoEntry 6 }
sleBFDSessionStatus OBJECT-TYPE
SYNTAX INTEGER
{
adminDown(0),
down(1),
init(2),
up(3),
disabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of this session.
AdminDown(0) is same as disabled(4)."
::= { sleBFDSessionInfoEntry 7 }
sleBFDSessionEchoUsage OBJECT-TYPE
SYNTAX INTEGER
{
notUsing(0),
using(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Determine whether this session use or not echo function."
::= { sleBFDSessionInfoEntry 8 }
sleBFDSessionUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this session<6F><6E>s status changed into <20><>Up<55><70>."
::= { sleBFDSessionInfoEntry 9 }
sleBFDSessionStats OBJECT IDENTIFIER ::= { sleBFDSession 2 }
sleBFDSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleBFDSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleBFDSessionStats 1 }
sleBFDSessionStatsEntry OBJECT-TYPE
SYNTAX SleBFDSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
::= { sleBFDSessionStatsTable 1 }
SleBFDSessionStatsEntry ::=
SEQUENCE {
sleBFDSessionStatsHolddownTime
Unsigned32,
sleBFDSessionStatsHolddownExpires
Unsigned32,
sleBFDSessionStatsHolddownHitCount
Unsigned32,
sleBFDSessionStatsHelloTime
Unsigned32,
sleBFDSessionStatsHelloHitCount
Unsigned32,
sleBFDSessionStatsRxCount
Unsigned32,
sleBFDSessionStatsRxAvgInterval
Unsigned32,
sleBFDSessionStatsRxMinInterval
Unsigned32,
sleBFDSessionStatsRxMaxInterval
Unsigned32,
sleBFDSessionStatsTxCount
Unsigned32,
sleBFDSessionStatsTxAvgInterval
Unsigned32,
sleBFDSessionStatsTxMinInterval
Unsigned32,
sleBFDSessionStatsTxMaxInterval
Unsigned32,
sleBFDSessionStatsEchoRxCount
Unsigned32,
sleBFDSessionStatsEchoRxAvgInterval
Unsigned32,
sleBFDSessionStatsEchoRxMinInterval
Unsigned32,
sleBFDSessionStatsEchoRxMaxInterval
Unsigned32,
sleBFDSessionStatsEchoTxCount
Unsigned32,
sleBFDSessionStatsEchoTxAvgInterval
Unsigned32,
sleBFDSessionStatsEchoTxMinInterva
Unsigned32,
sleBFDSessionStatsEchoTxMaxInterval
Unsigned32
}
sleBFDSessionStatsHolddownTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Neighbor Address referred to this session."
::= { sleBFDSessionStatsEntry 1 }
sleBFDSessionStatsHolddownExpires OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before this entry change into down status without receiving hello in unit of milliseconds."
::= { sleBFDSessionStatsEntry 2 }
sleBFDSessionStatsHolddownHitCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hit Count whose this session status chang into down."
::= { sleBFDSessionStatsEntry 3 }
sleBFDSessionStatsHelloTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time is when it expects next hello, after receiving that in unit of milliseconds."
::= { sleBFDSessionStatsEntry 4 }
sleBFDSessionStatsHelloHitCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hit Count whose this session received."
::= { sleBFDSessionStatsEntry 5 }
sleBFDSessionStatsRxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hit Count whose this session received control packet."
::= { sleBFDSessionStatsEntry 6 }
sleBFDSessionStatsRxAvgInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average interval whose this session received control packet."
::= { sleBFDSessionStatsEntry 7 }
sleBFDSessionStatsRxMinInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum interval whose this session received control packet."
::= { sleBFDSessionStatsEntry 8 }
sleBFDSessionStatsRxMaxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum interval whose this session received control packet."
::= { sleBFDSessionStatsEntry 9 }
sleBFDSessionStatsTxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hit Count whose this session send control packet."
::= { sleBFDSessionStatsEntry 10 }
sleBFDSessionStatsTxAvgInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average interval whose this session sent control packet."
::= { sleBFDSessionStatsEntry 11 }
sleBFDSessionStatsTxMinInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum interval whose this session sent control packet."
::= { sleBFDSessionStatsEntry 12 }
sleBFDSessionStatsTxMaxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum interval whose this session received control packet."
::= { sleBFDSessionStatsEntry 13 }
sleBFDSessionStatsEchoRxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hit Count whose this session received echo packet"
::= { sleBFDSessionStatsEntry 14 }
sleBFDSessionStatsEchoRxAvgInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average interval whose this session received echo packet"
::= { sleBFDSessionStatsEntry 15 }
sleBFDSessionStatsEchoRxMinInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum interval whose this session received echo packet"
::= { sleBFDSessionStatsEntry 16 }
sleBFDSessionStatsEchoRxMaxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum interval whose this session received echo packet"
::= { sleBFDSessionStatsEntry 17 }
sleBFDSessionStatsEchoTxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hit Count whose this session send echo packet
"
::= { sleBFDSessionStatsEntry 18 }
sleBFDSessionStatsEchoTxAvgInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average interval whose this session sent echo packet."
::= { sleBFDSessionStatsEntry 19 }
sleBFDSessionStatsEchoTxMinInterva OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum interval whose this session sent echo packet."
::= { sleBFDSessionStatsEntry 20 }
sleBFDSessionStatsEchoTxMaxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum interval whose this session received echo packet."
::= { sleBFDSessionStatsEntry 21 }
sleBFDSessionLocal OBJECT IDENTIFIER ::= { sleBFDSession 3 }
sleBFDSessionLocalTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleBFDSessionLocalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleBFDSessionLocal 1 }
sleBFDSessionLocalEntry OBJECT-TYPE
SYNTAX SleBFDSessionLocalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
::= { sleBFDSessionLocalTable 1 }
SleBFDSessionLocalEntry ::=
SEQUENCE {
sleBFDSessionLocalDiag
INTEGER,
sleBFDSessionLocalState
INTEGER,
sleBFDSessionLocalFlags
BITS,
sleBFDSessionLocalMultiplier
INTEGER,
sleBFDSessionLocalMinTxInterval
Unsigned32,
sleBFDSessionLocalMinRxInterval
Unsigned32,
sleBFDSessionLocalMinEchoInterval
Unsigned32
}
sleBFDSessionLocalDiag OBJECT-TYPE
SYNTAX INTEGER
{
noDiag(0),
detectExpired(1),
echoFailed(2),
neighDownAlarm(3),
fwdPlaneReset(4),
pathDown(5),
concatPathDown(6),
adminDown(7),
reverseConcatDown(8),
reserved(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of State field of this session<6F><6E>s control packet."
::= { sleBFDSessionLocalEntry 1 }
sleBFDSessionLocalState OBJECT-TYPE
SYNTAX INTEGER
{
adminDown(0),
donw(1),
init(2),
up(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of Diag field of this session<6F><6E>s control packet"
::= { sleBFDSessionLocalEntry 2 }
sleBFDSessionLocalFlags OBJECT-TYPE
SYNTAX BITS
{
poll(0),
final(1),
controlIndependent(2),
authPresent(3),
demand(4),
multipoint(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of Flags field of this session<6F><6E>s control packet."
::= { sleBFDSessionLocalEntry 3 }
sleBFDSessionLocalMultiplier OBJECT-TYPE
SYNTAX INTEGER (1..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinTxInterval field of this session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionLocalEntry 4 }
sleBFDSessionLocalMinTxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinTxInterval field of this session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionLocalEntry 5 }
sleBFDSessionLocalMinRxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinRxInterval field of this session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionLocalEntry 6 }
sleBFDSessionLocalMinEchoInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinEchoInterval field of this session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionLocalEntry 7 }
sleBFDSessionRemote OBJECT IDENTIFIER ::= { sleBFDSession 4 }
sleBFDSessionRemoteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleBFDSessionRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleBFDSessionRemote 1 }
sleBFDSessionRemoteEntry OBJECT-TYPE
SYNTAX SleBFDSessionRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
::= { sleBFDSessionRemoteTable 1 }
SleBFDSessionRemoteEntry ::=
SEQUENCE {
sleBFDSessionRemoteDiag
INTEGER,
sleBFDSessionRemoteState
INTEGER,
sleBFDSessionremoteFlags
BITS,
sleBFDSessionRemoteMultiplier
INTEGER,
sleBFDSessionRemoteMinTxInterval
Unsigned32,
sleBFDSessionRemoteMinRxInterval
Unsigned32,
sleBFDSessionRemoteMinEchoInterval
Unsigned32
}
sleBFDSessionRemoteDiag OBJECT-TYPE
SYNTAX INTEGER
{
noDiag(0),
detectExpired(1),
echoFailed(2),
neighDownAlarm(3),
fwdPlaneReset(4),
pathDown(5),
concatPathDown(6),
adminDown(7),
reverseConcatDown(8),
reserved(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of State field of remote session<6F><6E>s control packet."
::= { sleBFDSessionRemoteEntry 1 }
sleBFDSessionRemoteState OBJECT-TYPE
SYNTAX INTEGER
{
adminDown(0),
donw(1),
init(2),
up(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of Diag field of remote session<6F><6E>s control packet"
::= { sleBFDSessionRemoteEntry 2 }
sleBFDSessionremoteFlags OBJECT-TYPE
SYNTAX BITS
{
poll(0),
final(1),
controlIndependent(2),
authPresent(3),
demand(4),
multipoint(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of Flags field of remote session<6F><6E>s control packet."
::= { sleBFDSessionRemoteEntry 3 }
sleBFDSessionRemoteMultiplier OBJECT-TYPE
SYNTAX INTEGER (1..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinTxInterval field of this session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionRemoteEntry 4 }
sleBFDSessionRemoteMinTxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinTxInterval field of remote session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionRemoteEntry 5 }
sleBFDSessionRemoteMinRxInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinRxInterval field of remote session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionRemoteEntry 6 }
sleBFDSessionRemoteMinEchoInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of MinEchoInterval field of remote session<6F><6E>s control packet in unit of microseconds."
::= { sleBFDSessionRemoteEntry 7 }
sleBFDStaticGw OBJECT IDENTIFIER ::= { sleBFD 4 }
sleBFDStaticGwTable OBJECT-TYPE
SYNTAX SEQUENCE OF SleBFDStaticGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGw 1 }
sleBFDStaticGwEntry OBJECT-TYPE
SYNTAX SleBFDStaticGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { sleNetIfIndex, sleBFDStaticGwAddrType, sleBFDStaticGwAddr }
::= { sleBFDStaticGwTable 1 }
SleBFDStaticGwEntry ::=
SEQUENCE {
sleBFDStaticGwAddrType
InetAddressType,
sleBFDStaticGwAddr
InetAddress
}
sleBFDStaticGwAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BFD static Gateway address type. Only ipv4(1)."
::= { sleBFDStaticGwEntry 1 }
sleBFDStaticGwAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BFD static Gateway address. 4bytes"
::= { sleBFDStaticGwEntry 2 }
sleBFDStaticGwControl OBJECT IDENTIFIER ::= { sleBFDStaticGw 2 }
sleBFDStaticGwControlRequest OBJECT-TYPE
SYNTAX INTEGER
{
addBfdStaticGw(1),
delBfdStaticGw(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 1 }
sleBFDStaticGwControlStatus OBJECT-TYPE
SYNTAX SleControlStatusType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 2 }
sleBFDStaticGwControlTimer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 3 }
sleBFDStaticGwControlTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 4 }
sleBFDStaticGwControlReqResult OBJECT-TYPE
SYNTAX SleControlRequestResultType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 5 }
sleBFDStaticGwControlNetIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 6 }
sleBFDStaticGwControlGwAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 7 }
sleBFDStaticGwControlGwAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwControl 8 }
sleBFDStaticGwNotification OBJECT IDENTIFIER ::= { sleBFDStaticGw 3 }
sleBFDStaticGwAdded NOTIFICATION-TYPE
OBJECTS { sleBFDStaticGwControlRequest, sleBFDStaticGwControlTimer, sleBFDStaticGwControlReqResult, sleBFDStaticGwControlNetIfIndex, sleBFDStaticGwControlGwAddr,
sleBFDStaticGwControlGwAddrType }
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwNotification 1 }
sleBFDStaticGwDeleted NOTIFICATION-TYPE
OBJECTS { sleBFDStaticGwControlRequest, sleBFDStaticGwControlTimeStamp, sleBFDStaticGwControlReqResult, sleBFDStaticGwControlNetIfIndex, sleBFDStaticGwControlGwAddr,
sleBFDStaticGwControlGwAddrType }
STATUS current
DESCRIPTION
"Description."
::= { sleBFDStaticGwNotification 2 }
sleNetworkGroup OBJECT-GROUP
OBJECTS { sleNetIfIndex, sleNetIfName, sleNetIfDescription, sleNetIfTableIndex, sleNetIfAdminState,
sleNetIfOperState, sleNetIfMulticast, sleNetIfControlRequest, sleNetIfControlStatus, sleNetIfControlTimer,
sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlDescription, sleNetIfControlAdminState,
sleNetIfControlMulticast, sleIpAddrValue, sleIpAddrMask, sleIpAddrBcast, sleIpAddrControlRequest,
sleIpAddrControlStatus, sleIpAddrControlTimer, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrControlNetIfIndex,
sleIpAddrControlValue, sleIpAddrControlMask, sleArpIpAddress, sleArpPhyAddress, sleArpPortIndex,
sleArpHwType, sleArpControlRequest, sleArpControlStatus, sleArpControlTimer, sleArpControlTimeStamp,
sleArpControlReqResult, sleArpControlIpAddress, sleArpControlPhyAddress, sleRouteDstAddress, sleRouteDstMask,
sleRouteGateway, sleRouteInterface, sleRouteType, sleRouteProto, sleRouteMetric,
sleRouteActive, sleRouteBindingSrcAddr, sleRouteDistance, sleRouteControlRequest, sleRouteControlStatus,
sleRouteControlTimer, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
sleRouteControlGateway, sleRouteControlInterface, sleRouteControlBindingSrcAddr, sleRouteControlDistance, sleDhcpClIpAddr,
sleDhcpClState, sleDhcpClControlRequest, sleDhcpClControlStatus, sleDhcpClControlTimer, sleDhcpClControlTimeStamp,
sleDhcpClControlReqResult, sleDhcpClControlUpdateIP, sleNetIfRegState, sleNetIfMtu, sleNetIfIpSetMode,
sleNetIfIpMartianFilter, sleNetIfControlRegState, sleNetIfControlMtu, sleNetIfControlIpMartianFilter, sleIpAddrFlag,
sleIpAddrScope, sleIpAddrControlFlag, sleIpAddrControlScope, sleArpState, sleArpHwUsed,
sleArpUsedTime, sleArpControlNetIfIndex, sleArpControlState, sleArpControlMask, sleRouteSubtype,
sleRouteNexthopStatus, sleRouteRibStatus, sleNetworkArpAgingTime, sleNetworkControlRequest, sleNetworkControlStatus,
sleNetworkControlTimer, sleNetworkControlReqResult, sleNetworkControlTimeStamp, sleNetworkControlArpAgingTime, sleNetIfUpCnt,
sleNetIfDownCnt, sleNetIfLinkUpTime, sleNetIfElapsedTimeAfterClearStats, sleNetIfBindingVRFName, sleNetIfControlBindingVRFName,
sleRouteVRFIndex, sleRouteControlVRFIndex, sleTunnelIfIndex, sleTunnelIfLocalAddress, sleTunnelIfRemoteAddress,
sleTunnelIfMode, sleTunnelIfTTL, sleTunnelIfDscpMode, sleTunnelIfDscp, sleTunnelIfKeepaliveInterval,
sleTunnelIfKeepaliveRetry, sleTunnelIfControlRequest, sleTunnelIfControlStatus, sleTunnelIfControlTimer, sleTunnelIfControlTimeStamp,
sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlLocalAddress, sleTunnelIfControlRemoteAddress, sleTunnelIfControlMode,
sleTunnelIfControlTTL, sleTunneIflControlDscpMode, sleTunneIflControlDscp, sleTunnelIfControlKeepaliveInterval, sleTunneIflControlKeepaliveRetry,
sleTunnelAddressValue, sleTunnelAddressMask, sleTunnelIpAddrBcast, sleTunnelAddressFlag, sleTunnelAddressScope,
sleTunnelAddressControlRequest, sleTunnelAddressControlStatus, sleTunnelAddressControlTimer, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult,
sleTunnelAddressControlTunnelIfIndex, sleTunnelAddressControlValue, sleTunnelAddressControlMask, sleTunnelAddressControlFlag, sleTunnelAddressControlScope,
sleIpVRFIndex, sleIpVRFName, sleIpVRFControlRequest, sleIpVRFControlStatus, sleIpVRFControlTimer,
sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleNetIfOnFailUseVRF, sleNetIfControlOnFailUseVRF,
sleTunnelIfPathMtuDiscovery, sleTunnelIfVRFName, sleTunnelIfBindingPorts, sleTunnelIfControlPathMtuDiscovery, sleTunnelIfControlVRFName,
sleIpVRFDesignatedPorts, sleIpVRFControlDesignatedPorts, sleIpVRFSelectionSrcIndex, sleIpVRFSelectionSrcAddr, sleIpVRFSelectionSrcMask,
sleIpVRFSelectionSrcVRFName, sleIpVRFSelectionSrcControlRequest, sleIpVRFSelectionSrcControlStatus, sleIpVRFSelectionSrcControlTimer, sleIpVRFSelectionSrcControlTimeStamp,
sleIpVRFSelectionSrcControlReqResult, sleIpVRFSelectionSrcControlAddr, sleIpVRFSelectionSrcControlMask, sleIpVRFSelectionSrcControlVRFName, sleNetIfIpUnreachability,
sleNetIfControlIpUnreachability, sleIpVRFRouterId, sleIpVRFDescription, sleIpVRFControlRouterId, sleIpVRFControlDescription,
sleBFDEnable, sleBFDEchoEnable, sleBFDSlowTimer, sleBFDControlRequest, sleBFDControlStatus,
sleBFDControlTimer, sleBFDControlTimeStamp, sleBFDControlReqResult, sleBFDControlEnable, sleBFDControlEchoEnable,
sleBFDControlSlowTimer, sleBFDIfRxInterval, sleBFDIfTxInterval, sleBFDIfDetectMulti, sleBFDIfControlRequest,
sleBFDIfControlStatus, sleBFDIfControlTimer, sleBFDIfControlTimeStamp, sleBFDIfControlReqResult, sleBFDIfControlNetIfIndex,
sleBFDIfControlRxInterval, sleBFDIfControlTxInterval, sleBFDIfControlDetectMulti, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue,
sleBFDSessionRegProtocols, sleBFDSessionLocalDiscr, sleBFDSessionRemoteDiscr, sleBFDSessionDetecMultiplier, sleBFDSessionStatus,
sleBFDSessionEchoUsage, sleBFDSessionUptime, sleBFDSessionStatsHolddownTime, sleBFDSessionStatsHolddownExpires, sleBFDSessionStatsHolddownHitCount,
sleBFDSessionStatsHelloTime, sleBFDSessionStatsHelloHitCount, sleBFDSessionStatsRxCount, sleBFDSessionStatsRxAvgInterval, sleBFDSessionStatsRxMinInterval,
sleBFDSessionStatsRxMaxInterval, sleBFDSessionStatsTxCount, sleBFDSessionStatsTxAvgInterval, sleBFDSessionStatsTxMinInterval, sleBFDSessionStatsTxMaxInterval,
sleBFDSessionLocalDiag, sleBFDSessionLocalState, sleBFDSessionLocalFlags, sleBFDSessionLocalMultiplier, sleBFDSessionLocalMinTxInterval,
sleBFDSessionLocalMinRxInterval, sleBFDSessionLocalMinEchoInterval, sleBFDSessionRemoteDiag, sleBFDSessionRemoteState, sleBFDSessionremoteFlags,
sleBFDSessionRemoteMultiplier, sleBFDSessionRemoteMinTxInterval, sleBFDSessionRemoteMinRxInterval, sleBFDSessionRemoteMinEchoInterval, sleBFDStaticGwAddrType,
sleBFDStaticGwAddr, sleBFDStaticGwControlRequest, sleBFDStaticGwControlStatus, sleBFDStaticGwControlTimer, sleBFDStaticGwControlTimeStamp,
sleBFDStaticGwControlReqResult, sleBFDStaticGwControlNetIfIndex, sleBFDStaticGwControlGwAddrType, sleBFDStaticGwControlGwAddr, sleBFDSessionStatsEchoRxCount,
sleBFDSessionStatsEchoRxAvgInterval, sleBFDSessionStatsEchoRxMinInterval, sleBFDSessionStatsEchoRxMaxInterval, sleBFDSessionStatsEchoTxCount, sleBFDSessionStatsEchoTxAvgInterval,
sleBFDSessionStatsEchoTxMinInterva, sleBFDSessionStatsEchoTxMaxInterval, sleNetIfipRedirects, sleNetIfControlIpRedirects, sleIpAddrIpIndex,
sleIpAddrUnnumUsedIp, sleIpAddrControlIpIndex, sleTunnelAddressUnnumIpIndex, sleTunnelAddressControlUnnumIpIndex, sleNetIfIpForwarding,
sleNetIfControlIpForwarding, sleTunnelIfLocalAddress6, sleTunnelIfRemoteAddress6, sleTunnelIfControlLocalAddress6, sleTunnelIfControlRemoteAddress6,
sleNetIfAlias, sleNetIfIpArpAlias, sleNetIfIpArpAliasMac, sleNetIfArpMCProbeCount, sleNetIfArpUCProbeCount,
sleNetIfArpRetransTime, sleNetIfIpProxyArp, sleNetIfIpRPFilter, sleNetIfRPFilter, sleNetIfRouteMap,
sleNetIfControlAlias, sleNetIfControlIpArpAlias, sleNetIfControlIpArpAliasMac, sleNetIfControlArpMCProbeCount, sleNetIfControlArpUCProbeCount,
sleNetIfControlArpRetransTime, sleNetIfControlIpProxyArp, sleNetIfControlIpRPFilter, sleNetIfControlRPFilter, sleNetIfControlRouteMap,
sleBFDIfRxIntervalIPv6, sleBFDIfTxIntervalIJPv6, sleBFDIfDetectMultiIPv6, sleBFDIfControlRxIntervalIPv6, sleBFDIfControlTxIntervalIPv6,
sleBFDIfControlDetectMultiIPv6, sleTunnelIfControlTos, sleTunnelIfControlDmac, sleTunnelIfControlChecksum, sleTunnelIfTos,
sleTunnelIfDmac, sleTunnelIfChecksum, sleNetworkBaseVrfDynamicForwardBinding, sleNetworkControlVrfDynamicForwardBinding, sleDhcpClControlNetIfIndex,
sleDhcpClMode, sleDhcpClNetmask, sleDhcpClGateway, sleDhcpClDnsServer, sleDhcpClServer,
sleDhcpClClientId, sleDhcpClClientIdStyle, sleDhcpClClassId, sleDhcpClClassIdStyle, sleDhcpClLeasetime,
sleDhcpClControlMode, sleDhcpClControlClientId, sleDhcpClControlClientIdStyle, sleDhcpClControlClassId, sleDhcpClControlClassIdStyle,
sleDhcpClControlLeasetime, sleTunnelAddressUnnumIfIndex, sleTunnelAddressControlUnnumIfIndex }
STATUS current
DESCRIPTION
"Description."
::= { sleNetwork 14 }
sleNetworkNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { sleNetIfProfileChanged, sleIpAddressCreated, sleIpAddressDestroyed, sleArpEntryCreated, sleArpEntryDestroyed,
sleArpTableCleared, sleRouteStaticCreated, sleRouteStaticDestroyed, sleRouteStaticProfileChanged, sleDhcpClModeChanged,
sleDhcpClProfileChanged, sleTunnelIfCreated, sleTunnelIfDeleted, sleTunnelIfLocalAddressChanged, sleTunnelIfRemoteAddressChanged,
sleTunnelIfModeChanged, sleTunnelIfTTLChanged, sleTunnelIfDscpChanged, sleTunnelIfKeepaliveChanged, sleTunnelAddressCreated,
sleTunnelAddressDeleted, sleIpVRFCreated, sleIpVRFDeleted, sleDhcpClStateChanged, sleNetIfRegStateChanged,
sleNetIfIpMartianFilterChanged, sleArpTableClearedByAddr, sleNetworkArpProfileChanged, sleNetIfBindingVRFSet, sleNetIfBindingVRFUnset,
sleNetIfIpOnFailUseVRFChanged, sleTunnelIfPathMtuDiscoveryChanged, sleIpVRFDesignatedPortsSet, sleIpVRFDesignatedPortsUnset, sleIpVRFSelectionSrcSet,
sleNetIfIpUnreachabilityChanged, sleIpVRFRouterIdChanged, sleIpVRFDescriptionChanged, sleBFDBaseProfileChanged, sleBFDIfProfileChanged,
sleBFDStaticGwAdded, sleBFDStaticGwDeleted, sleNetIfIpRedirectsChanged, sleIpAddressIpIndexAdded, sleIpAddressIpIndexDeleted,
sleTunnelAddressUnnumChanged, sleTunnelAddressUnnumDeleted, sleNetIfIpForwardingChanged, sleTunnelIfLocalAddress6Changed, sleTunnelIfRemoteAddress6Changed,
sleNetIfAliasChanged, sleNetIfIpArpAliasChanged, sleNetIfArpMCProbeCountChanged, sleNetIfArpUCProbeCountChanged, sleNetIfArpRetransTimeChanged,
sleNetIfIpProxyArpChanged, sleNetIfIpRPFilterChanged, sleNetIfRPFilterChanged, sleNetIfRouteMapChanged, sleIpVRFSelectionSrcUnset,
sleTunnelIfVRFNameSet, sleTunnelIfVRFNameUnset }
STATUS current
DESCRIPTION
"Description."
::= { sleNetwork 15 }
END
--
-- sle-network-mib.mib
--