mibs/MIBS/dell/DELL-NETWORKING-IF-EXTENSION-MIB

924 lines
34 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
DELL-NETWORKING-IF-EXTENSION-MIB DEFINITIONS ::= BEGIN
-- This module provides authoritative definitions for
-- Dell Networking OS extenstion to the IF MIB.
--
-- This module will be extended, as needed.
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter64, Unsigned32
FROM SNMPv2-SMI
TimeStamp, DisplayString, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
Integer32
FROM SNMPv2-SMI
dellNetMgmt
FROM DELL-NETWORKING-SMI;
dellNetIfExtensionMib MODULE-IDENTITY
LAST-UPDATED "201203061200Z" -- Mar 6, 2012 12:00:00 GMT
ORGANIZATION
"Dell Inc"
CONTACT-INFO
"http://www.dell.com/support"
DESCRIPTION
"Dell Networking OS IF Extenstion MIB. "
REVISION "201408121200Z"
DESCRIPTION
"Added dellNetIfPortListBitPos.Removed dellNetIfDhcpAdminStatus and dellNetIfDhcpOperStatus."
REVISION "201203061200Z"
DESCRIPTION
"Added DHCP Client attributes."
REVISION "201008111200Z"
DESCRIPTION
"Add dellNetIfOutThrottles."
REVISION "201008101200Z"
DESCRIPTION
"Initial version of this mib module."
::= { dellNetMgmt 11 }
-- ### Groups ###
dellNetIfExtensionMibObject OBJECT IDENTIFIER ::={ dellNetIfExtensionMib 1 }
dellNetIfExtensionParams OBJECT IDENTIFIER ::={ dellNetIfExtensionMibObject 1 }
dellNetIfExtensionStats OBJECT IDENTIFIER ::={ dellNetIfExtensionMibObject 2 }
dellNetIfTransceiverData OBJECT IDENTIFIER ::={ dellNetIfExtensionMibObject 3 }
dellNetIfAlarmObjects OBJECT IDENTIFIER ::={ dellNetIfExtensionMibObject 4 }
-- ### Dell Networking OS IF Extenstion Tables
--
-- Interface Table
--
dellNetIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DellNetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Dell Networking OS Extension ifTable contains
generic interface parameters."
::= { dellNetIfExtensionParams 1 }
dellNetIfEntry OBJECT-TYPE
SYNTAX DellNetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A row defintion of Dell Networking OS Interface
Extension parameters."
INDEX { ifIndex }
::= { dellNetIfTable 1 }
DellNetIfEntry ::=
SEQUENCE {
dellNetIfIpMtu Unsigned32,
dellNetIfDuplexMode INTEGER,
dellNetIfQueueingStrategy DisplayString,
dellNetIfRxFlowCtrl TruthValue,
dellNetIfTxFlowCtrl TruthValue,
dellNetIfDescr OCTET STRING,
dellNetIfAdminStatus INTEGER,
dellNetIfRateInterval Unsigned32,
dellNetIfSpeed INTEGER,
dellNetIfPortListBitPos Integer32
}
dellNetIfIpMtu OBJECT-TYPE
SYNTAX Unsigned32 (594..9252)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP (Internet Protocol), Maximum
Transmission Unit value."
::= { dellNetIfEntry 1 }
dellNetIfDuplexMode OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duplex mode of the interface.
This will be read-write only for s60"
::= { dellNetIfEntry 2 }
dellNetIfQueueingStrategy OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queueing strategy used for packets."
::= { dellNetIfEntry 3 }
dellNetIfRxFlowCtrl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flow control receive. This will be read-write only for s60"
::= { dellNetIfEntry 4 }
dellNetIfTxFlowCtrl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flow Control transmit.This will be read-only only for s60"
::= { dellNetIfEntry 5 }
dellNetIfDescr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string containing information about the interface.
This will be read-write only for s60"
::= { dellNetIfEntry 6 }
dellNetIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
up (1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A admin status of any interface.
This will be read-write only for s60"
::= { dellNetIfEntry 7 }
dellNetIfRateInterval OBJECT-TYPE
SYNTAX Unsigned32 (30..299)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate info interval for the interface.
This will be read-write only for s60"
::= { dellNetIfEntry 8 }
dellNetIfSpeed OBJECT-TYPE
SYNTAX INTEGER{
auto (1),
tenMbps (10),
hundredMbps (100),
thousandMbps (1000)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface's current bandwidth in bits per second.
This will be read-write only for s60"
::= { dellNetIfEntry 9 }
dellNetIfPortListBitPos OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used for identifying the bit position in PortList Object for a given interface."
::= { dellNetIfEntry 10 }
--
-- Interface Statistics Table
--
dellNetIfStaticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DellNetIfStaticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistcs information of the interfaces for performance monitoring."
::= { dellNetIfExtensionStats 1 }
dellNetIfStaticsEntry OBJECT-TYPE
SYNTAX DellNetIfStaticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row defintion of Dell Networking OS Extension
interface statistics."
INDEX { ifIndex }
::= { dellNetIfStaticsTable 1 }
DellNetIfStaticsEntry ::=
SEQUENCE {
dellNetIfInVlanPkts Counter64,
dellNetIfIn64BytePkts Counter64,
dellNetIfIn65To127BytePkts Counter64,
dellNetIfIn128To255BytePkts Counter64,
dellNetIfIn256To511BytePkts Counter64,
dellNetIfIn512To1023BytePkts Counter64,
dellNetIfInOver1023BytePkts Counter64,
dellNetIfInThrottles Counter64,
dellNetIfInRunts Counter64,
dellNetIfInGiants Counter64,
dellNetIfInCRC Counter64,
dellNetIfInOverruns Counter64,
dellNetIfOutVlanPkts Counter64,
dellNetIfOutUnderruns Counter64,
dellNetIfOutUnicasts Counter64,
dellNetIfOutCollisions Counter64,
dellNetIfOutWredDrops Counter64,
dellNetIfOut64BytePkts Counter64,
dellNetIfOut65To127BytePkts Counter64,
dellNetIfOut128To255BytePkts Counter64,
dellNetIfOut256To511BytePkts Counter64,
dellNetIfOut512To1023BytePkts Counter64,
dellNetIfOutOver1023BytePkts Counter64,
dellNetIfOutThrottles Counter64,
dellNetIfLastDiscontinuityTime TimeStamp,
dellNetIfInCentRate Integer32,
dellNetIfOutCentRate Integer32
}
dellNetIfInVlanPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of valid VLAN Tagged
frames received."
::= { dellNetIfStaticsEntry 1 }
dellNetIfIn64BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were 64 octets in length
(excluding framing bits but in-cluding FCS octets)."
::= { dellNetIfStaticsEntry 2 }
dellNetIfIn65To127BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 65 and 127
octets in length inclusive (ex-cluding framing
bits but including FCS octets)."
::= { dellNetIfStaticsEntry 3 }
dellNetIfIn128To255BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 128 and 255
octets in length inclusive (excluding framing
bits but including FCS octets)."
::= { dellNetIfStaticsEntry 4 }
dellNetIfIn256To511BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 256 and 511
octets in length inclusive (excluding framing
bits but including FCS octets)."
::= { dellNetIfStaticsEntry 5 }
dellNetIfIn512To1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 512 and 1023
octets in length inclusive (excluding framing
bits but including FCS octets)."
::= { dellNetIfStaticsEntry 6 }
dellNetIfInOver1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that
were longer than 1023 (1025 Bytes in case of
VLAN Tag) octets (excluding framing bits, but
including FCS octets) and were otherwise
well formed. This counter is not incremented
for too long frames."
::= { dellNetIfStaticsEntry 7 }
dellNetIfInThrottles OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is re-ceived."
::= { dellNetIfStaticsEntry 8 }
dellNetIfInRunts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise
well formed."
::= { dellNetIfStaticsEntry 9 }
dellNetIfInGiants OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that were
longer than 1518 (1522 Bytes in case of VLAN Tag)
octets (excluding framing bits, but including FCS
octets) and were otherwise well formed. This counter
is not incremented for too long frames."
::= { dellNetIfStaticsEntry 10 }
dellNetIfInCRC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that had
a length (ex-cluding framing bits, but including
FCS octets) of between 64 and 1518 octets,
inclusive, but had a bad CRC."
::= { dellNetIfStaticsEntry 11 }
dellNetIfInOverruns OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames dropped because
of buffer issue."
::= { dellNetIfStaticsEntry 12 }
dellNetIfOutVlanPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good VLAN Tagged Frames sent
successfully."
::= { dellNetIfStaticsEntry 13 }
dellNetIfOutUnderruns OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames dropped because
of buffer underrun."
::= { dellNetIfStaticsEntry 14 }
dellNetIfOutUnicasts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Unicast Frames sent successfully."
::= { dellNetIfStaticsEntry 15 }
dellNetIfOutCollisions OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the frames that due to excessive
or late collisions are not transmitted successfully."
::= { dellNetIfStaticsEntry 16 }
dellNetIfOutWredDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the frames that are dropped using
WRED policy because of to excessive traffic."
::= { dellNetIfStaticsEntry 17 }
dellNetIfOut64BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was 64 Bytes."
::= { dellNetIfStaticsEntry 18 }
dellNetIfOut65To127BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 65 to 127 Bytes."
::= { dellNetIfStaticsEntry 19 }
dellNetIfOut128To255BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 128 to 255 Bytes."
::= { dellNetIfStaticsEntry 20 }
dellNetIfOut256To511BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 256 to 511 Bytes."
::= { dellNetIfStaticsEntry 21 }
dellNetIfOut512To1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 512 to 1023 Bytes."
::= { dellNetIfStaticsEntry 22 }
dellNetIfOutOver1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was greater than 1023 Bytes."
::= { dellNetIfStaticsEntry 23 }
dellNetIfOutThrottles OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is sent."
::= { dellNetIfStaticsEntry 24 }
dellNetIfLastDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion
at which this interface's counters suffered a
discontinuity via a reset. If no such discontinuities
have occurred since the last reinitialization of
the local management subsystem, then this object
contains a zero value."
::= { dellNetIfStaticsEntry 25 }
dellNetIfInCentRate OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ingress rate in percentage.
This is an integer value which can go from 0 to 100."
::= { dellNetIfStaticsEntry 26 }
dellNetIfOutCentRate OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the egress rate in percentage.
This is an integer value which can go from 0 to 100."
::= { dellNetIfStaticsEntry 27 }
dellNetIfTransceiverDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF DellNetIfTransceiverDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information to monitor transceiver data."
::= { dellNetIfTransceiverData 1 }
dellNetIfTransceiverDataEntry OBJECT-TYPE
SYNTAX DellNetIfTransceiverDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row defintion of Dell Networking OS Extension
transceiver data."
INDEX { ifIndex }
::= { dellNetIfTransceiverDataTable 1 }
DellNetIfTransceiverDataEntry::=
SEQUENCE {
dellNetIfTransDeviceName OCTET STRING,
dellNetIfTransPort OCTET STRING,
dellNetIfTransOpticsPresent TruthValue,
dellNetIfTransOpticsType OCTET STRING,
dellNetIfTransVendorName OCTET STRING,
dellNetIfTransPartNumber OCTET STRING,
dellNetIfTransSerialNumber OCTET STRING,
dellNetIfTransTransmitPowerLane1 OCTET STRING,
dellNetIfTransTransmitPowerLane2 OCTET STRING,
dellNetIfTransTransmitPowerLane3 OCTET STRING,
dellNetIfTransTransmitPowerLane4 OCTET STRING,
dellNetIfTransReceivePowerLane1 OCTET STRING,
dellNetIfTransReceivePowerLane2 OCTET STRING,
dellNetIfTransReceivePowerLane3 OCTET STRING,
dellNetIfTransReceivePowerLane4 OCTET STRING,
dellNetIfTransTemperature OCTET STRING,
dellNetIfTransVoltage OCTET STRING,
dellNetIfTransTransmitBiasCurrentLane1 OCTET STRING,
dellNetIfTransTransmitBiasCurrentLane2 OCTET STRING,
dellNetIfTransTransmitBiasCurrentLane3 OCTET STRING,
dellNetIfTransTransmitBiasCurrentLane4 OCTET STRING
}
dellNetIfTransDeviceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - DeviceName"
::= { dellNetIfTransceiverDataEntry 1 }
dellNetIfTransPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Port"
::= { dellNetIfTransceiverDataEntry 2 }
dellNetIfTransOpticsPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - OpticsPresent shows the presence of optic.
The possible values are 1 when the optic is inserted and 2 when the optic is not inserted."
::= { dellNetIfTransceiverDataEntry 3 }
dellNetIfTransOpticsType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Type"
::= { dellNetIfTransceiverDataEntry 4 }
dellNetIfTransVendorName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Name"
::= { dellNetIfTransceiverDataEntry 5 }
dellNetIfTransPartNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - PartNumber"
::= { dellNetIfTransceiverDataEntry 6 }
dellNetIfTransSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - SerialNumber"
::= { dellNetIfTransceiverDataEntry 7 }
dellNetIfTransTransmitPowerLane1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Power in Lane 1 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 8 }
dellNetIfTransTransmitPowerLane2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Power in Lane 2 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 9 }
dellNetIfTransTransmitPowerLane3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Power in Lane 3 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 10 }
dellNetIfTransTransmitPowerLane4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Power in Lane 4 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 11 }
dellNetIfTransReceivePowerLane1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Receive Power in Lane 1 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 12 }
dellNetIfTransReceivePowerLane2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Receive Power in Lane 2 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 13 }
dellNetIfTransReceivePowerLane3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Receive Power in Lane 3 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 14 }
dellNetIfTransReceivePowerLane4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Receive Power in Lane 4 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 15 }
dellNetIfTransTemperature OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "degree Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Temperature in unit degree Celsius.
For optics supporting temperature, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 16 }
dellNetIfTransVoltage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Voltage in unit volts.
For optics supporting voltage, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 17 }
dellNetIfTransTransmitBiasCurrentLane1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Bias Current in Lane 1 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 18 }
dellNetIfTransTransmitBiasCurrentLane2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Bias Current in Lane 2 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 19 }
dellNetIfTransTransmitBiasCurrentLane3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Bias Current in Lane 3 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 20 }
dellNetIfTransTransmitBiasCurrentLane4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..241))
UNITS "mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TransceiverData - Transmit Bias Current in Lane 4 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed."
::= { dellNetIfTransceiverDataEntry 21 }
dellNetIfAlarmMibNotifications OBJECT IDENTIFIER ::= { dellNetIfAlarmObjects 1 }
-- ## Traps
dellNetIfAlarmHighBer NOTIFICATION-TYPE
OBJECTS { ifIndex
}
STATUS current
DESCRIPTION
"The driver/agent generate this trap when the
Bit error rate is high on an interface."
::= { dellNetIfAlarmMibNotifications 1 }
dellNetIfAlarmHighBerClr NOTIFICATION-TYPE
OBJECTS { ifIndex
}
STATUS current
DESCRIPTION
"The driver/agent generate this trap when the
high Bit error rate alarm on an interface is cleared."
::= { dellNetIfAlarmMibNotifications 2 }
dellNetIfAlarmFastRetrain NOTIFICATION-TYPE
OBJECTS { ifIndex
}
STATUS current
DESCRIPTION
"The driver/agent generate this trap when the
retrain event is observed on an interface."
::= { dellNetIfAlarmMibNotifications 3 }
-- ### conformance information ###
dellNetIfExtensionMibConformance OBJECT IDENTIFIER ::= { dellNetIfExtensionMib 2 }
dellNetIfExtensionMibCompliances OBJECT IDENTIFIER ::= { dellNetIfExtensionMibConformance 1 }
dellNetIfExtensionMibGroups OBJECT IDENTIFIER ::= { dellNetIfExtensionMibConformance 2 }
-- ## compliance statements
dellNetIfExtensionMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Dell Networking OS
IF Extension MIB."
MODULE -- this module
MANDATORY-GROUPS {
dellNetIfParamsGroup,
dellNetIfStatsGroup,
dellNetIfTransceiverDataGroup,
dellNetIfNotificationGroup
}
::= { dellNetIfExtensionMibCompliances 1 }
-- ## units of conformance
dellNetIfParamsGroup OBJECT-GROUP
OBJECTS {
dellNetIfIpMtu,
dellNetIfDuplexMode,
dellNetIfQueueingStrategy,
dellNetIfRxFlowCtrl,
dellNetIfTxFlowCtrl,
dellNetIfDescr,
dellNetIfAdminStatus,
dellNetIfRateInterval,
dellNetIfSpeed,
dellNetIfPortListBitPos
}
STATUS current
DESCRIPTION
"A collection of objects providing the
Dell Networking OS IF Extenstion parameters."
::= { dellNetIfExtensionMibGroups 1 }
dellNetIfStatsGroup OBJECT-GROUP
OBJECTS {
dellNetIfInVlanPkts,
dellNetIfIn64BytePkts,
dellNetIfIn65To127BytePkts,
dellNetIfIn128To255BytePkts,
dellNetIfIn256To511BytePkts,
dellNetIfIn512To1023BytePkts,
dellNetIfInOver1023BytePkts,
dellNetIfInThrottles,
dellNetIfInRunts,
dellNetIfInGiants,
dellNetIfInCRC,
dellNetIfInOverruns,
dellNetIfOutVlanPkts,
dellNetIfOutUnderruns,
dellNetIfOutUnicasts,
dellNetIfOutCollisions,
dellNetIfOutWredDrops,
dellNetIfOut64BytePkts,
dellNetIfOut65To127BytePkts,
dellNetIfOut128To255BytePkts,
dellNetIfOut256To511BytePkts,
dellNetIfOut512To1023BytePkts,
dellNetIfOutOver1023BytePkts,
dellNetIfOutThrottles,
dellNetIfLastDiscontinuityTime,
dellNetIfInCentRate,
dellNetIfOutCentRate
}
STATUS current
DESCRIPTION
"A collection of objects providing the
interface statistics."
::= { dellNetIfExtensionMibGroups 2 }
dellNetIfTransceiverDataGroup OBJECT-GROUP
OBJECTS {
dellNetIfTransDeviceName,
dellNetIfTransPort,
dellNetIfTransOpticsPresent,
dellNetIfTransOpticsType,
dellNetIfTransVendorName,
dellNetIfTransPartNumber,
dellNetIfTransSerialNumber,
dellNetIfTransTransmitPowerLane1,
dellNetIfTransTransmitPowerLane2,
dellNetIfTransTransmitPowerLane3,
dellNetIfTransTransmitPowerLane4,
dellNetIfTransReceivePowerLane1,
dellNetIfTransReceivePowerLane2,
dellNetIfTransReceivePowerLane3,
dellNetIfTransReceivePowerLane4,
dellNetIfTransTemperature,
dellNetIfTransVoltage,
dellNetIfTransTransmitBiasCurrentLane1,
dellNetIfTransTransmitBiasCurrentLane2,
dellNetIfTransTransmitBiasCurrentLane3,
dellNetIfTransTransmitBiasCurrentLane4
}
STATUS current
DESCRIPTION
"A collection of objects providing the
Dell Networking OS Transceiver Data."
::= { dellNetIfExtensionMibGroups 3 }
dellNetIfNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
dellNetIfAlarmHighBer,
dellNetIfAlarmHighBerClr,
dellNetIfAlarmFastRetrain
}
STATUS current
DESCRIPTION
"Notifications for Dell Networking OS Interface mib"
::= { dellNetIfExtensionMibGroups 4 }
END