david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/dell/DELLEMC-OS10-BGP4V2-MIB

1616 lines
56 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- extracted from draft-ietf-idr-bgp4-mibv2-15.txt
-- at Wed Jul 4 11:46:02 2018
-- Renumbered to sit underneath Dell's enterprise.
-- *****************************************************************
-- DELLEMC-OS10-BGP4V2-MIB
--
--
-- Copyright (c) 2018 by Dell Inc.
-- All rights reserved.
-- *****************************************************************
DELLEMC-OS10-BGP4V2-MIB DEFINITIONS ::= BEGIN
-- This module provides authoritative definitions for Dell EMC Networking OS10
-- BGP4V2 MIB.
--
-- This module will be extended, as needed.
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Gauge32, Unsigned32
FROM SNMPv2-SMI
os10Experiment
FROM DELLEMC-OS10-SMI-MIB
InetAddressType, InetAddress, InetPortNumber,
InetAutonomousSystemNumber, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
TruthValue, RowPointer, TimeStamp, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
os10Bgp4V2Mib MODULE-IDENTITY
LAST-UPDATED "202002251200Z"
ORGANIZATION "Dell EMC"
CONTACT-INFO "http://www.dell.com/support"
DESCRIPTION
"The MIB module for the BGP-4 protocol."
REVISION "202002251200Z"
DESCRIPTION
"Changed the MAX-ACCESS of bgp4V2AdjRibsOutIndex to not-accessible."
REVISION "201807041200Z"
DESCRIPTION
"Dell EMC Networking OS10 Experiment object IDs added."
REVISION "201401240000Z"
DESCRIPTION
"This MIB updates and replaces the BGP MIB defined in
RFC 4273."
::= { os10Experiment 1 }
Os10Bgp4V2IdentifierTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d."
STATUS current
DESCRIPTION
"The representation of a BGP Identifier. BGP Identifiers
are presented in the received network byte order.
The BGP Identifier is displayed as if it is an IP address,
even if it would be an illegal one."
REFERENCE
"RFC 4273, Section 4.2"
SYNTAX OCTET STRING(SIZE (4))
Os10Bgp4V2AddressFamilyIdentifierTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The representation of a BGP AFI. The value of this object
should be restricted to be between the values of 0 and
65535."
REFERENCE
"RFC 4760, Section 3"
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
Os10Bgp4V2SubsequentAddressFamilyIdentifierTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The representation of a BGP SAFI"
REFERENCE
"RFC 4760, Section 3. The value of this object should be
restricted to be between the values of 0 and 255."
SYNTAX INTEGER {
unicast(1),
multicast(2),
mpls(4)
}
-- Top level components of this MIB module
-- Notifications
os10bgp4V2Notifications OBJECT IDENTIFIER ::= { os10Bgp4V2Mib 0 }
-- Objects
os10bgp4V2Objects OBJECT IDENTIFIER ::= { os10Bgp4V2Mib 1 }
-- Conformance
os10bgp4V2Conformance OBJECT IDENTIFIER ::= { os10Bgp4V2Mib 2 }
--
-- Per-instance BGP discontinuities
--
os10bgp4V2DiscontinuityTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2DiscontinuityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of BGP-4 discontinuities. Discontinuities that have
external visibility occur on a per-BGP instance basis.
Transitions by a given BGP peer will result in a consistent
BGP view within that instance and thus do not represent a
discontinuity from a protocol standpoint."
::= { os10bgp4V2Objects 1 }
os10bgp4V2DiscontinuityEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2DiscontinuityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry repsenting information about a discontinuity event
for a given BGP instance."
INDEX {
os10bgp4V2PeerInstance
}
::= { os10bgp4V2DiscontinuityTable 1 }
Os10Bgp4V2DiscontinuityEntry ::= SEQUENCE {
os10bgp4V2DiscontinuityTime
TimeStamp
}
os10bgp4V2DiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the most recent occasion at which
this BGP management instance has suffered a discontinuity."
::= { os10bgp4V2DiscontinuityEntry 1 }
--
-- Per-peer session management information.
--
os10bgp4V2PeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table. This table contains, one entry per BGP
peer, information about the connections with BGP peers."
::= { os10bgp4V2Objects 2 }
os10bgp4V2PeerEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the connection with
a remote BGP peer."
INDEX {
os10bgp4V2PeerInstance,
os10bgp4V2PeerRemoteAddrType,
os10bgp4V2PeerRemoteAddr
}
::= { os10bgp4V2PeerTable 1 }
Os10Bgp4V2PeerEntry ::= SEQUENCE {
-- INDEX information
os10bgp4V2PeerInstance
Unsigned32,
os10bgp4V2PeerLocalAddrType
InetAddressType,
os10bgp4V2PeerLocalAddr
InetAddress,
os10bgp4V2PeerRemoteAddrType
InetAddressType,
os10bgp4V2PeerRemoteAddr
InetAddress,
-- Local
os10bgp4V2PeerLocalPort
InetPortNumber,
os10bgp4V2PeerLocalAs
InetAutonomousSystemNumber,
os10bgp4V2PeerLocalIdentifier
Os10Bgp4V2IdentifierTC,
-- Remote
os10bgp4V2PeerRemotePort
InetPortNumber,
os10bgp4V2PeerRemoteAs
InetAutonomousSystemNumber,
os10bgp4V2PeerRemoteIdentifier
Os10Bgp4V2IdentifierTC,
-- Session status
os10bgp4V2PeerAdminStatus
INTEGER,
os10bgp4V2PeerState
INTEGER,
os10bgp4V2PeerDescription
SnmpAdminString
}
os10bgp4V2PeerInstance OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing instance index.
Some BGP implementations permit the creation of
multiple instances of a BGP routing process. An
example includes routers running BGP/MPLS IP Virtual
Private Networks.
Implementations that do not support multiple
routing instances should return 1 for this object."
::= { os10bgp4V2PeerEntry 1 }
os10bgp4V2PeerLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the local end of the peering
session."
::= { os10bgp4V2PeerEntry 2 }
os10bgp4V2PeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address of this entry's BGP connection.
An implementation is required to support IPv4 peering
sessions in which case the length of this object is 4.
An implementation MAY support IPv6 peering
sessions in which case the length of this object is 16.
IPv6 link-local peering sessions MAY be supported by
this MIB. In this case the length of this object is 20."
::= { os10bgp4V2PeerEntry 3 }
os10bgp4V2PeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family of the remote end of the peering
session.
An implementation is required to support IPv4 peering
sessions in which case the length of this object is 4.
An implementation MAY support IPv6 peering
sessions in which case the length of this object is 16.
IPv6 link-local peering sessions MAY be supported by
this MIB. In this case the length of this object is 20."
::= { os10bgp4V2PeerEntry 4 }
os10bgp4V2PeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote IP address of this entry's BGP peer."
::= { os10bgp4V2PeerEntry 5 }
os10bgp4V2PeerLocalPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the BGP
peers."
::= { os10bgp4V2PeerEntry 6 }
os10bgp4V2PeerLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Some implementations of BGP can represent themselves
as multiple ASes. This is the AS that this peering
session is representing itself as to the remote peer."
::= { os10bgp4V2PeerEntry 7 }
os10bgp4V2PeerLocalIdentifier OBJECT-TYPE
SYNTAX Os10Bgp4V2IdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of the local system for this peering
session. It is REQUIRED that all os10bgp4V2PeerLocalIdentifier
values for the same os10bgp4V2PeerInstance be identical."
REFERENCE
"RFC 4271, Section 4.2, 'BGP Identifier'."
::= { os10bgp4V2PeerEntry 8 }
os10bgp4V2PeerRemotePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the BGP
peers.
Note that the objects os10bgp4V2PeerLocalAddr,
os10bgp4V2PeerLocalPort, os10bgp4V2PeerRemoteAddr and
os10bgp4V2PeerRemotePort provide the appropriate reference to
the standard MIB TCP connection table, or even the ipv6
TCP MIB as in RFC 4022."
REFERENCE
"RFC 2012 - SNMPv2 Management Information Base for the
Transmission Control Protocol using SMIv2.
RFC 4022 - IP Version 6 Management Information Base
for the Transmission Control Protocol."
::= { os10bgp4V2PeerEntry 9 }
os10bgp4V2PeerRemoteAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote autonomous system number received in the BGP
OPEN message."
REFERENCE
"RFC 4271, Section 4.2."
::= { os10bgp4V2PeerEntry 10 }
os10bgp4V2PeerRemoteIdentifier OBJECT-TYPE
SYNTAX Os10Bgp4V2IdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of this entry's remote BGP peer.
This entry should be 0.0.0.0 unless the
os10bgp4V2PeerState is in the openconfirm or the
established state."
REFERENCE
"RFC 4271, Section 4.2, 'BGP Identifier'."
::= { os10bgp4V2PeerEntry 11 }
os10bgp4V2PeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
halted(1),
running(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the BGP FSM for this remote peer is
halted or running. The BGP FSM for a remote peer is
halted after processing a Stop event. Likewise, it is
in the running state after a Start event.
The os10bgp4V2PeerState will generally be in the idle state
when the FSM is halted, although some extensions such
as Graceful Restart will leave the peer in the Idle
state but with the FSM running."
REFERENCE
"RFC 4271, Section 8.1.2."
::= { os10bgp4V2PeerEntry 12 }
os10bgp4V2PeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP peer connection state."
REFERENCE
"RFC 4271, Section 8.2.2."
::= { os10bgp4V2PeerEntry 13 }
os10bgp4V2PeerDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A user configured description identifying this peer. When
this object is not the empty string, this object SHOULD
contain a description that is unique within a given BGP
instance for this peer."
::= { os10bgp4V2PeerEntry 14 }
--
-- Per-peer error management information.
--
os10bgp4V2PeerErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On a per-peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session."
::= { os10bgp4V2Objects 3 }
os10bgp4V2PeerErrorsEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about errors sent
and received for a particular BGP peer."
AUGMENTS {
os10bgp4V2PeerEntry
}
::= { os10bgp4V2PeerErrorsTable 1 }
Os10Bgp4V2PeerErrorsEntry ::= SEQUENCE {
os10bgp4V2PeerLastErrorCodeReceived
Unsigned32,
os10bgp4V2PeerLastErrorSubCodeReceived
Unsigned32,
os10bgp4V2PeerLastErrorReceivedTime
TimeStamp,
os10bgp4V2PeerLastErrorReceivedText
SnmpAdminString,
os10bgp4V2PeerLastErrorReceivedData
OCTET STRING,
os10bgp4V2PeerLastErrorCodeSent
Unsigned32,
os10bgp4V2PeerLastErrorSubCodeSent
Unsigned32,
os10bgp4V2PeerLastErrorSentTime
TimeStamp,
os10bgp4V2PeerLastErrorSentText
SnmpAdminString,
os10bgp4V2PeerLastErrorSentData
OCTET STRING
}
os10bgp4V2PeerLastErrorCodeReceived OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code received from this peer via
NOTIFICATION message on this connection. If no error has
occurred, this field is zero."
REFERENCE
"RFC 4271, Section 4.5.
RFC 4486 optionally supported.
RFC 3362, Section 5 optionally supported."
::= { os10bgp4V2PeerErrorsEntry 1 }
os10bgp4V2PeerLastErrorSubCodeReceived OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last subcode received from this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero."
REFERENCE
"RFC 4271, Section 4.5.
RFC 4486 optionally supported.
RFC 3362, Section 5 optionally supported."
::= { os10bgp4V2PeerErrorsEntry 2 }
os10bgp4V2PeerLastErrorReceivedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was received from
this peer."
REFERENCE
"RFC 4271, Section 4.5."
::= { os10bgp4V2PeerErrorsEntry 3 }
os10bgp4V2PeerLastErrorReceivedText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that was reported."
::= { os10bgp4V2PeerErrorsEntry 4 }
os10bgp4V2PeerLastErrorReceivedData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data seen by this peer.
Per RFC 2578, some implementations may have limitations
dealing with OCTET STRINGS larger than 255. Thus, this
data may be truncated."
REFERENCE
"RFC 4271, Section 4.5,
RFC 2578, Section 7.1.2,
RFC 4486 optionally supported.
RFC 3362, Section 5 optionally supported."
::= { os10bgp4V2PeerErrorsEntry 5 }
os10bgp4V2PeerLastErrorCodeSent OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code sent to this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero."
REFERENCE
"RFC 4271, Section 4.5.
RFC 4486 optionally supported.
RFC 3362, Section 5 optionally supported."
::= { os10bgp4V2PeerErrorsEntry 6 }
os10bgp4V2PeerLastErrorSubCodeSent OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last subcode sent to this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero."
REFERENCE
"RFC 4271, Section 4.5.
RFC 4486 optionally supported.
RFC 3362, Section 5 optionally supported."
::= { os10bgp4V2PeerErrorsEntry 7 }
os10bgp4V2PeerLastErrorSentTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was sent to
this peer."
REFERENCE
"RFC 4271, Section 4.5."
::= { os10bgp4V2PeerErrorsEntry 8 }
os10bgp4V2PeerLastErrorSentText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that is being reported."
::= { os10bgp4V2PeerErrorsEntry 9 }
os10bgp4V2PeerLastErrorSentData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data sent to this peer.
Per RFC 2578, some implementations may have limitations
dealing with OCTET STRINGS larger than 255. Thus, this
data may be truncated."
REFERENCE
"RFC 4271, Section 4.5,
RFC 2578, Section 7.1.2
RFC 4486 optionally supported.
RFC 3362, Section 5 optionally supported."
::= { os10bgp4V2PeerErrorsEntry 10 }
--
-- Per-peer Event Times
--
os10bgp4V2PeerEventTimesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the established state."
::= { os10bgp4V2Objects 4 }
os10bgp4V2PeerEventTimesEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a set of statistics about time
spent and events encountered in the peer session
established state."
AUGMENTS {
os10bgp4V2PeerEntry
}
::= { os10bgp4V2PeerEventTimesTable 1 }
Os10Bgp4V2PeerEventTimesEntry ::= SEQUENCE {
os10bgp4V2PeerFsmEstablishedTime
Gauge32,
os10bgp4V2PeerInUpdatesElapsedTime
Gauge32
}
os10bgp4V2PeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timer indicates how long (in seconds) this peer
has been in the established state or how long since this
peer was last in the established state. It is set to
zero when a new peer is configured or when the router is
booted. If the peer has never reached the established
state, the value remains zero."
REFERENCE
"RFC 4271, Section 8."
::= { os10bgp4V2PeerEventTimesEntry 1 }
os10bgp4V2PeerInUpdatesElapsedTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time (in seconds) since the last BGP UPDATE
message was received from the peer. Each time
bgpPeerInUpdates is incremented, the value of this
object is set to zero (0)."
REFERENCE
"RFC 4271, Section 4.3.
RFC 4271, Section 8.2.2, Established state."
::= { os10bgp4V2PeerEventTimesEntry 2 }
--
-- Per-Peer Configured Timers
--
os10bgp4V2PeerConfiguredTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per peer management data on BGP session timers."
::= { os10bgp4V2Objects 5 }
os10bgp4V2PeerConfiguredTimersEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to the current state of
BGP timers on a given peering session."
AUGMENTS {
os10bgp4V2PeerEntry
}
::= { os10bgp4V2PeerConfiguredTimersTable 1 }
Os10Bgp4V2PeerConfiguredTimersEntry ::= SEQUENCE {
os10bgp4V2PeerConnectRetryInterval
Unsigned32,
os10bgp4V2PeerHoldTimeConfigured
Unsigned32,
os10bgp4V2PeerKeepAliveConfigured
Unsigned32,
os10bgp4V2PeerMinASOrigInterval
Unsigned32,
os10bgp4V2PeerMinRouteAdverInterval
Unsigned32
}
os10bgp4V2PeerConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval (in seconds) for the ConnectRetry timer.
The suggested value for this timer is 120 seconds."
REFERENCE
"RFC 4271, Section 8.2.2. This is the value used
to initialize the 'ConnectRetryTimer'."
::= { os10bgp4V2PeerConfiguredTimersEntry 1 }
os10bgp4V2PeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval (in seconds) for the Hold Timer
established with the peer. The value of this object is
calculated by this BGP speaker, using the smaller of the
values in bgpPeerHoldTimeConfigured and the Hold Time
received in the OPEN message.
This value must be at least three seconds if it is not
zero (0).
If the Hold Timer has not been established with the
peer this object MUST have a value of zero (0).
If the bgpPeerHoldTimeConfigured object has a value of
(0), then this object MUST have a value of (0)."
REFERENCE
"RFC 4271, Section 4.2."
::= { os10bgp4V2PeerConfiguredTimersEntry 2 }
os10bgp4V2PeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval (in seconds) for the KeepAlive timer
configured for this BGP speaker with this peer. The
value of this object will only determine the KEEPALIVE
messages' frequency relative to the value specified in
bgpPeerHoldTimeConfigured; the actual time interval for
the KEEPALIVE messages is indicated by bgpPeerKeepAlive.
A reasonable maximum value for this timer would be one
third of that of bgpPeerHoldTimeConfigured.
If the value of this object is zero (0), no periodic
KEEPALIVE messages are sent to the peer after the BGP
connection has been established. The suggested value
for this timer is 30 seconds."
REFERENCE
"RFC 4271, Section 4.4.
RFC 4271, Section 10."
::= { os10bgp4V2PeerConfiguredTimersEntry 3 }
os10bgp4V2PeerMinASOrigInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval (in seconds) for the
MinASOriginationInterval timer.
The suggested value for this timer is 15 seconds."
REFERENCE
"RFC 4271, Section 9.2.1.2.
RFC 4271, Section 10."
::= { os10bgp4V2PeerConfiguredTimersEntry 4 }
os10bgp4V2PeerMinRouteAdverInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval (in seconds) for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30 seconds for
EBGP connections and 5 seconds for IBGP connections."
REFERENCE
"RFC 4271, Section 9.2.1.1.
RFC 4271, Section 10."
::= { os10bgp4V2PeerConfiguredTimersEntry 5 }
--
-- Per-Peer Negotiated Timers
--
os10bgp4V2PeerNegotiatedTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configured values of per-peer timers are seen
in the os10bgp4V2PeerConfiguredTimersTable.
Values in this table reflect the current
operational values, after negotiation from values
derived from initial configuration."
::= { os10bgp4V2Objects 6 }
os10bgp4V2PeerNegotiatedTimersEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry reflects a value of the currently
operational, negotiated timer as reflected in the
Os10Bgp4V2PeerNegotiatedTimersEntry."
AUGMENTS {
os10bgp4V2PeerEntry
}
::= { os10bgp4V2PeerNegotiatedTimersTable 1 }
Os10Bgp4V2PeerNegotiatedTimersEntry ::= SEQUENCE {
os10bgp4V2PeerHoldTime
Unsigned32,
os10bgp4V2PeerKeepAlive
Unsigned32
}
os10bgp4V2PeerHoldTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is calculated by this BGP
Speaker as being;
zero (0) - if this was the value sent by the peer and
this value is permitted by this BGP Speaker. In this
case, no keepalive messages are sent and the Hold Timer
is not set.
At least three (3). This value is the smaller of
the value sent by this peer in the OPEN message and
os10bgp4V2PeerHoldTimeConfigured for this peer.
If the peer is not in the established state, the value
of this object is zero (0)."
REFERENCE
"RFC 4271, Section 4.2."
::= { os10bgp4V2PeerNegotiatedTimersEntry 1 }
os10bgp4V2PeerKeepAlive OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
established with the peer. The value of this object
is calculated by this BGP speaker such that, when
compared with os10bgp4V2PeerHoldTime, it has the same
proportion as what os10bgp4V2PeerKeepAliveConfigured has
when compared with os10bgp4V2PeerHoldTimeConfigured. If
the value of this object is zero (0), it indicates
that the KeepAlive timer has not been established
with the peer, or, the value of
os10bgp4V2PeerKeepAliveConfigured is zero (0).
If the peer is not in the established state, the value
of this object is zero (0)."
REFERENCE
"RFC 4271, Section 4.4."
::= { os10bgp4V2PeerNegotiatedTimersEntry 2 }
--
-- Per-peer counters
--
os10bgp4V2PeerCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2PeerCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The counters associated with a BGP Peer."
::= { os10bgp4V2Objects 7 }
os10bgp4V2PeerCountersEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2PeerCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session."
AUGMENTS {
os10bgp4V2PeerEntry
}
::= { os10bgp4V2PeerCountersTable 1 }
Os10Bgp4V2PeerCountersEntry ::= SEQUENCE {
os10bgp4V2PeerInUpdates
Counter32,
os10bgp4V2PeerOutUpdates
Counter32,
os10bgp4V2PeerInTotalMessages
Counter32,
os10bgp4V2PeerOutTotalMessages
Counter32,
os10bgp4V2PeerFsmEstablishedTransitions
Counter32
}
os10bgp4V2PeerInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages received on this
connection."
::= { os10bgp4V2PeerCountersEntry 1 }
os10bgp4V2PeerOutUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages transmitted on this
connection."
::= { os10bgp4V2PeerCountersEntry 2 }
os10bgp4V2PeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received from the remote
peer on this connection."
::= { os10bgp4V2PeerCountersEntry 3 }
os10bgp4V2PeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages transmitted to the remote
peer on this connection."
::= { os10bgp4V2PeerCountersEntry 4 }
os10bgp4V2PeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the BGP FSM transitioned into
the established state for this peer."
::= { os10bgp4V2PeerCountersEntry 5 }
--
-- Per-Peer Prefix Gauges
--
os10bgp4V2PrefixGaugesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2PrefixGaugesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional per-peer, per AFI-SAFI counters for
prefixes"
::= { os10bgp4V2Objects 8 }
os10bgp4V2PrefixGaugesEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2PrefixGaugesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a bgp-peers prefix
counters."
INDEX {
os10bgp4V2PeerInstance,
os10bgp4V2PeerRemoteAddrType,
os10bgp4V2PeerRemoteAddr,
os10bgp4V2PrefixGaugesAfi,
os10bgp4V2PrefixGaugesSafi
}
::= { os10bgp4V2PrefixGaugesTable 1 }
Os10Bgp4V2PrefixGaugesEntry ::= SEQUENCE {
os10bgp4V2PrefixGaugesAfi
Os10Bgp4V2AddressFamilyIdentifierTC,
os10bgp4V2PrefixGaugesSafi
Os10Bgp4V2SubsequentAddressFamilyIdentifierTC,
os10bgp4V2PrefixInPrefixes
Gauge32,
os10bgp4V2PrefixInPrefixesAccepted
Gauge32,
os10bgp4V2PrefixOutPrefixes
Gauge32
}
os10bgp4V2PrefixGaugesAfi OBJECT-TYPE
SYNTAX Os10Bgp4V2AddressFamilyIdentifierTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AFI index of the per-peer, per prefix counters"
::= { os10bgp4V2PrefixGaugesEntry 1 }
os10bgp4V2PrefixGaugesSafi OBJECT-TYPE
SYNTAX Os10Bgp4V2SubsequentAddressFamilyIdentifierTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SAFI index of the per-peer, per prefix counters"
::= { os10bgp4V2PrefixGaugesEntry 2 }
os10bgp4V2PrefixInPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes received from a peer and are
stored in the Adj-Ribs-In for that peer.
Note that this number does not reflect prefixes that
have been discarded due to policy."
REFERENCE
"RFC 4271, Sections 3.2 and 9."
::= { os10bgp4V2PrefixGaugesEntry 3 }
os10bgp4V2PrefixInPrefixesAccepted OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are eligible to become active
in the Loc-Rib."
REFERENCE
"RFC 4271, Sections 3.2 and 9."
::= { os10bgp4V2PrefixGaugesEntry 4 }
os10bgp4V2PrefixOutPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in that peer's Adj-Ribs-Out."
REFERENCE
"RFC 4271, Sections 3.2 and 9."
::= { os10bgp4V2PrefixGaugesEntry 5 }
--
-- BGP NLRI
--
os10bgp4V2NlriTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
os10bgp4V2NlriBest is true represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In."
REFERENCE
"RFC 4271, Sections 3.2 and 9."
::= { os10bgp4V2Objects 9 }
os10bgp4V2NlriEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network."
INDEX {
os10bgp4V2PeerInstance,
os10bgp4V2NlriAfi,
os10bgp4V2NlriSafi,
os10bgp4V2NlriPrefixType,
os10bgp4V2NlriPrefix,
os10bgp4V2NlriPrefixLen,
os10bgp4V2PeerRemoteAddrType,
os10bgp4V2PeerRemoteAddr,
os10bgp4V2NlriIndex
}
::= { os10bgp4V2NlriTable 1 }
Os10Bgp4V2NlriEntry ::= SEQUENCE {
os10bgp4V2NlriIndex
Unsigned32,
os10bgp4V2NlriAfi
Os10Bgp4V2AddressFamilyIdentifierTC,
os10bgp4V2NlriSafi
Os10Bgp4V2SubsequentAddressFamilyIdentifierTC,
os10bgp4V2NlriPrefixType
InetAddressType,
os10bgp4V2NlriPrefix
InetAddress,
os10bgp4V2NlriPrefixLen
InetAddressPrefixLength,
os10bgp4V2NlriBest
TruthValue,
os10bgp4V2NlriCalcLocalPref
Unsigned32,
os10bgp4V2NlriOrigin
INTEGER,
os10bgp4V2NlriNextHopAddrType
InetAddressType,
os10bgp4V2NlriNextHopAddr
InetAddress,
os10bgp4V2NlriLinkLocalNextHopAddrType
InetAddressType,
os10bgp4V2NlriLinkLocalNextHopAddr
InetAddress,
os10bgp4V2NlriLocalPrefPresent
TruthValue,
os10bgp4V2NlriLocalPref
Unsigned32,
os10bgp4V2NlriMedPresent
TruthValue,
os10bgp4V2NlriMed
Unsigned32,
os10bgp4V2NlriAtomicAggregate
TruthValue,
os10bgp4V2NlriAggregatorPresent
TruthValue,
os10bgp4V2NlriAggregatorAS
InetAutonomousSystemNumber,
os10bgp4V2NlriAggregatorAddr
Os10Bgp4V2IdentifierTC,
os10bgp4V2NlriAsPathCalcLength
Unsigned32,
os10bgp4V2NlriAsPathString
SnmpAdminString,
os10bgp4V2NlriAsPath
OCTET STRING,
os10bgp4V2NlriPathAttrUnknown
OCTET STRING
}
os10bgp4V2NlriIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index allows for multiple instances of a base
prefix for a certain AFI-SAFI from a given peer.
This is currently useful for two things:
1. Allowing for a peer in future implementations to
send more than a single route instance.
2. Allow for extensions which extend the NLRI field
to send the same prefix while utilizing other
extension specific information. An example of
this is RFC 3107 - Carrying MPLS labels in BGP."
REFERENCE
"RFC 3107 - Carrying Label Information in BGP-4."
::= { os10bgp4V2NlriEntry 1 }
os10bgp4V2NlriAfi OBJECT-TYPE
SYNTAX Os10Bgp4V2AddressFamilyIdentifierTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family of the prefix for this NLRI.
Note that the AFI is not necessarily equivalent to
the an InetAddressType."
REFERENCE
"RFC 4760 - Multiprotocol Extensions for BGP-4"
::= { os10bgp4V2NlriEntry 2 }
os10bgp4V2NlriSafi OBJECT-TYPE
SYNTAX Os10Bgp4V2SubsequentAddressFamilyIdentifierTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subsequent address family of the prefix for
this NLRI"
REFERENCE
"RFC 4760 - Multiprotocol Extensions for BGP-4"
::= { os10bgp4V2NlriEntry 3 }
os10bgp4V2NlriPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the IP address prefix in the
Network Layer Reachability Information field.
The value of this object is derived from the
appropriate value from the os10bgp4V2NlriAfi field.
Where an appropriate InetAddressType is not
available, the value of the object must be
unknown(0)."
::= { os10bgp4V2NlriEntry 4 }
os10bgp4V2NlriPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by os10bgp4V2NlriPrefixLen.
Any bits beyond the length specified by
os10bgp4V2NlriPrefixLen are zeroed.
An implementation is required to support IPv4
prefixes. In this case, the object length
is (0..4).
An implementation MAY support IPv6 prefixes.
In this case, the object length is (0..16)"
REFERENCE
"RFC 4271, Section 4.3."
::= { os10bgp4V2NlriEntry 5 }
os10bgp4V2NlriPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length in bits of the address prefix in
the Network Layer Reachability Information field."
::= { os10bgp4V2NlriEntry 6 }
os10bgp4V2NlriBest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route
was chosen as the best BGP4 route for this
destination."
REFERENCE
"RFC 4271, Section 9.1.2."
::= { os10bgp4V2NlriEntry 7 }
os10bgp4V2NlriCalcLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route.
In the case where this prefix is ineligible, the
value of this object will be zero (0)."
REFERENCE
"RFC 4271, Section 9.1.1"
::= { os10bgp4V2NlriEntry 8 }
os10bgp4V2NlriOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned via the EGP protocol
incomplete(3) -- networks that
-- are learned by some other
-- means
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ultimate origin of the path information."
REFERENCE
"RFC 4271, Section 4.3.
RFC 4271, Section 5.1.1."
::= { os10bgp4V2NlriEntry 9 }
os10bgp4V2NlriNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the address for
the border router that should be used
to access the destination network."
::= { os10bgp4V2NlriEntry 10 }
os10bgp4V2NlriNextHopAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the border router that
should be used to access the destination
network. This address is the nexthop
address received in the UPDATE packet associated with
this prefix.
Note that for RFC2545 style double nexthops,
this object will always contain the global scope
nexthop. bgpPathAttrLinkLocalNextHop will contain
the linklocal scope nexthop, if it is present.
In the case a mechanism is developed to use only a link
local nexthop, os10bgp4V2NlriNextHopAddr will contain the
link local nexthop."
REFERENCE
"RFC 4271, Section 4.3,
RFC 4271, Section 5.1.3,
RFC 2545, Section 3."
::= { os10bgp4V2NlriEntry 11 }
os10bgp4V2NlriLinkLocalNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type for IPv6 link local addresses.
This is present only when receiving RFC 2545
style double nexthops.
This object is optionally present in BGP
implementations that do not support IPv6.
When no IPv6 link local nexthop is present, the value of
this object should be unknown(0)."
REFERENCE
"RFC 2545, Section 3."
::= { os10bgp4V2NlriEntry 12 }
os10bgp4V2NlriLinkLocalNextHopAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains an IPv6 link local address
and is present only when receiving RFC 2545 style
double nexthops.
This object is optionally present in BGP
implementations that do not support IPv6.
When no IPv6 link local nexthop is present, the length of
this object should be zero."
REFERENCE
"RFC 2545, Section 3."
::= { os10bgp4V2NlriEntry 13 }
os10bgp4V2NlriLocalPrefPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is true when the LOCAL_PREF value was sent in
the UPDATE message."
::= { os10bgp4V2NlriEntry 14 }
os10bgp4V2NlriLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speakers degree of preference for an
advertised route."
REFERENCE
"RFC 4271, Section 4.3.
RFC 4271, Section 5.1.5."
::= { os10bgp4V2NlriEntry 15 }
os10bgp4V2NlriMedPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is true when the MED value was sent in
the UPDATE message."
::= { os10bgp4V2NlriEntry 16 }
os10bgp4V2NlriMed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate between multiple
exit points to an adjacent autonomous system. When the MED
value is absent but has a calculated default value, this
object will contain the calculated value."
REFERENCE
"RFC 4271, Section 4.3.
RFC 4271, Section 5.1.4."
::= { os10bgp4V2NlriEntry 17 }
os10bgp4V2NlriAtomicAggregate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is true when the ATOMIC_AGGREGATE Path Attribute
is present and indicates that the NLRI MUST NOT be made
more specific."
REFERENCE
"RFC 4271, Sections 5.1.6 and 9.1.4."
::= { os10bgp4V2NlriEntry 18 }
os10bgp4V2NlriAggregatorPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is true when the AGGREGATOR path attribute
was sent in the UPDATE message."
::= { os10bgp4V2NlriEntry 19 }
os10bgp4V2NlriAggregatorAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that performed route
aggregation. When os10bgp4V2NlriAggregatorPresent is
false, the value of this object should be zero (0)."
REFERENCE
"RFC 4271, Section 5.1.7.
RFC 4271, Section 9.2.2.2."
::= { os10bgp4V2NlriEntry 20 }
os10bgp4V2NlriAggregatorAddr OBJECT-TYPE
SYNTAX Os10Bgp4V2IdentifierTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last BGP4 speaker that performed
route aggregation. When os10bgp4V2NlriAggregatorPresent is
false, the value of this object should be 0.0.0.0"
REFERENCE
"RFC 4271, Section 5.1.7.
RFC 4271, Section 9.2.2.2."
::= { os10bgp4V2NlriEntry 21 }
os10bgp4V2NlriAsPathCalcLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the calculated length of the
AS Path according to the rules of the BGP
specification. This value is used in route selection."
REFERENCE
"RFC 4271, Section 9.1.2.2.a"
::= { os10bgp4V2NlriEntry 22 }
os10bgp4V2NlriAsPathString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability.
Note that SnmpAdminString is only capable of representing a
maximum of 255 characters. This may lead to the string
being truncated in the presence of a large AS Path. It is
RECOMMENDED that when this object's contents will be
truncated that the final 3 octets be reserved for the
ellipses string, '...'. os10bgp4V2NlriAsPath may give access
to the full AS Path."
::= { os10bgp4V2NlriEntry 23 }
-- Maximum size of the following is derived as
-- 4096 max message size
-- - 16 BGP message marker bytes
-- - 2 BGP message size
-- - 1 BGP message type (UPDATE with unknown attr)
-- - 2 UPDATE routes length (even assuming no routes)
-- - 2 UPDATE path attributes length
-- - 1 path attribute flag octet
-- ---------
-- 4072 bytes maximum per-message attribute value data
os10bgp4V2NlriAsPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..4072))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In order to provide a canonicalized form of the BGP-4
AS_PATH along with the human-readable
os10bgp4V2NlriAsPathString, which may be truncated, this object
contains the contents of the BGP-4 AS_PATH Path Attribute.
This object may be parsed using the rules defined for
Four-octet ASes as defined in RFC 4893. RFC 4271, Section
4.3, 'Path Attributes: b) AS_PATH' as amended by RFC 5065,
Section 3 defines the general format of the AS_PATH path
attribute and its code points.
In brief, the AS_PATH is composed of a sequence of AS
Segments. Each AS Segment is represented by a triple:
<path segment type, path segment length,
path segment value>.
The path segment type and path segment length fields are
one octet in length each.
The path segment type field may be one of:
1 - AS_SET (RFC 4721, Section 4.3)
2 - AS_SEQUENCE (RFC 4721, Section 4.3)
3 - AS_CONFED_SEQUENCE (RFC 3065, Section 5)
4 - AS_CONFED_SET (RFC 3065, Section 5)
The path segment length field contains the number of ASes
(not the number of octets) in the path segment value field.
The path segment value field contains one or more AS
numbers, each encoded as a 4-octet length field in network
byte order.
Note that since an SNMP agent may truncate this object to
less than its maximum theoretical length of 4072 octets
users of this object should be prepared to deal with a
truncated and thus malformed AS_PATH. It is RECOMMENDED
that when such truncation would occur on the boundary of an
encoded AS that the partial AS be discarded from this
object and the object's size be adjusted accordingly.
Further, it is also RECOMMENDED that when such truncation,
either alone or in conjuction with the truncation of a
partially encoded AS described previously, would yield an
empty path segment value field that the path segment type
and path segment length components of the truncated AS_PATH
also be discarded and the object's size be adjusted
accordingly."
REFERENCE
"RFC 4271, Section 4.3.
RFC 5065, Section 5.
RFC 4893."
::= { os10bgp4V2NlriEntry 24 }
os10bgp4V2NlriPathAttrUnknown OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4072))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path Attributes not understood by this implementation
SHOULD be be presented in this object. Those Path
Attributes use the type, length, value encoding documented
in RFC 4271, Section 4.3, 'Path Attributes'.
Note that since an SNMP agent may truncate this object to
less than its maximum theoretical length of 4072 octets
users of this object should be prepared to deal with a
truncated and thus malformed Path Attribute."
REFERENCE
"RFC 4271, Section 4.3."
::= { os10bgp4V2NlriEntry 25 }
--
-- Adj-Ribs-Out Table
--
os10bgp4V2AdjRibsOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF Os10Bgp4V2AdjRibsOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains on a per-peer basis one or more
routes from the os10bgp4V2NlriTable that have been
placed in this peer's Adj-Ribs-Out."
REFERENCE
"RFC 4271, Section 3.2."
::= { os10bgp4V2Objects 10 }
os10bgp4V2AdjRibsOutEntry OBJECT-TYPE
SYNTAX Os10Bgp4V2AdjRibsOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of BGP routes that have been placed into a
peer's Adj-Ribs-Out."
INDEX {
os10bgp4V2PeerInstance,
os10bgp4V2NlriAfi,
os10bgp4V2NlriSafi,
os10bgp4V2NlriPrefixType,
os10bgp4V2NlriPrefix,
os10bgp4V2NlriPrefixLen,
os10bgp4V2PeerRemoteAddrType,
os10bgp4V2PeerRemoteAddr,
os10bgp4V2AdjRibsOutIndex
}
::= { os10bgp4V2AdjRibsOutTable 1 }
Os10Bgp4V2AdjRibsOutEntry ::= SEQUENCE {
os10bgp4V2AdjRibsOutIndex
Unsigned32,
os10bgp4V2AdjRibsOutRoute
RowPointer
}
os10bgp4V2AdjRibsOutIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Certain extensions to BGP permit multiple instance of
a per afi, per safi prefix to be advertised to a peer.
This object allows the enumeration of them."
::= { os10bgp4V2AdjRibsOutEntry 1 }
os10bgp4V2AdjRibsOutRoute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object points to the route in the os10bgp4V2NlriTable
that corresponds to the entry in the peer's
Adj-Rib-Out. Outgoing route maps are not
reflected at this point as those are part of the
Update-Send process."
REFERENCE
"RFC 4271, Section 9.2."
::= { os10bgp4V2AdjRibsOutEntry 2 }
END
Reference in New Issue Copy Permalink