mibs/MIBS/dell/F10-IF-EXTENSION-MIB

508 lines
17 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
F10-IF-EXTENSION-MIB DEFINITIONS ::= BEGIN
-- Force10 Networks, Inc.
-- 390 Holger Way
-- San Jose, CA 95134
-- This module provides authoritative definitions for
-- Force10 extenstion to the IF MIB.
--
-- This module will be extended, as needed.
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter64, Unsigned32
FROM SNMPv2-SMI
TimeStamp, DisplayString, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
f10Mgmt
FROM FORCE10-SMI;
f10IfExtensionMib MODULE-IDENTITY
LAST-UPDATED "200804071200Z" -- Apr 7, 2008 12:00:00 GMT
ORGANIZATION
"Force10 Networks, Inc."
CONTACT-INFO
"Force10 Networks, Inc.
350 Holger Way
San Jose, CA 95134 USA
Phone: +1 (408) 571 3500
Fax: +1 (408) 571 3550
Email: support@force10networks.com"
DESCRIPTION
"Force10 Enterprise IF Extenstion MIB. "
REVISION "200804071200Z"
DESCRIPTION
"Add f10IfOutThrottles."
REVISION "200710031200Z"
DESCRIPTION
"Initial version of this mib module."
::= { f10Mgmt 11 }
-- ### Groups ###
f10IfExtensionMibObject OBJECT IDENTIFIER ::={ f10IfExtensionMib 1 }
f10IfExtensionParams OBJECT IDENTIFIER ::={ f10IfExtensionMibObject 1 }
f10IfExtensionStats OBJECT IDENTIFIER ::={ f10IfExtensionMibObject 2 }
-- ### Force10 IF Extenstion Tables
--
-- Interface Table
--
f10IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Force10 Extension ifTable contains
generic interface parameters."
::= { f10IfExtensionParams 1 }
f10IfEntry OBJECT-TYPE
SYNTAX F10IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A row defintion of Force10 Interface
Extension parameters."
INDEX { ifIndex }
::= { f10IfTable 1 }
F10IfEntry ::=
SEQUENCE {
f10IfIpMtu Unsigned32,
f10IfDuplexMode INTEGER,
f10IfQueueingStrategy DisplayString,
f10IfRxFlowCtrl TruthValue,
f10IfTxFlowCtrl TruthValue
}
f10IfIpMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP (Internet Protocol), Maximum
Transmission Unit value."
::= { f10IfEntry 1 }
f10IfDuplexMode OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2),
auto(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplex mode of the interface."
::= { f10IfEntry 2 }
f10IfQueueingStrategy OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queueing strategy used for packets."
::= { f10IfEntry 3 }
f10IfRxFlowCtrl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flow control receive."
::= { f10IfEntry 4 }
f10IfTxFlowCtrl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flow Control transmit."
::= { f10IfEntry 5 }
--
-- Interface Statistics Table
--
f10IfStaticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF F10IfStaticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistcs information of the
interfaces for performance monitoring."
::= { f10IfExtensionStats 1 }
f10IfStaticsEntry OBJECT-TYPE
SYNTAX F10IfStaticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row defintion of Force10 Extension
interface statistics."
INDEX { ifIndex }
::= { f10IfStaticsTable 1 }
F10IfStaticsEntry ::=
SEQUENCE {
f10IfInVlanPkts Counter64,
f10IfIn64BytePkts Counter64,
f10ifIn65To127BytePkts Counter64,
f10IfIn128To255BytePkts Counter64,
f10IfIn256To511BytePkts Counter64,
f10IfIn512To1023BytePkts Counter64,
f10IfInOver1023BytePkts Counter64,
f10IfInThrottles Counter64,
f10IfInRunts Counter64,
f10IfInGiants Counter64,
f10IfInCRC Counter64,
f10IfInOverruns Counter64,
f10IfOutVlanPkts Counter64,
f10IfOutUnderruns Counter64,
f10IfOutUnicasts Counter64,
f10IfOutCollisions Counter64,
f10IfOutWredDrops Counter64,
f10IfOut64BytePkts Counter64,
f10IfOut65To127BytePkts Counter64,
f10IfOut128To255BytePkts Counter64,
f10IfOut256To511BytePkts Counter64,
f10IfOut512To1023BytePkts Counter64,
f10IfOutOver1023BytePkts Counter64,
f10IfOutThrottles Counter64,
f10IfLastDiscontinuityTime TimeStamp
}
f10IfInVlanPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of valid VLAN Tagged
frames received."
::= { f10IfStaticsEntry 1 }
f10IfIn64BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were 64 octets in length
(excluding framing bits but in-cluding FCS octets)."
::= { f10IfStaticsEntry 2 }
f10ifIn65To127BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 65 and 127
octets in length inclusive (ex-cluding framing
bits but including FCS octets)."
::= { f10IfStaticsEntry 3 }
f10IfIn128To255BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 128 and 255
octets in length inclusive (excluding framing
bits but including FCS octets)."
::= { f10IfStaticsEntry 4 }
f10IfIn256To511BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 256 and 511
octets in length inclusive (excluding framing
bits but including FCS octets)."
::= { f10IfStaticsEntry 5 }
f10IfIn512To1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames (including bad
frames) received that were between 512 and 1023
octets in length inclusive (excluding framing
bits but including FCS octets)."
::= { f10IfStaticsEntry 6 }
f10IfInOver1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that
were longer than 1023 (1025 Bytes in case of
VLAN Tag) octets (excluding framing bits, but
including FCS octets) and were otherwise
well formed. This counter is not incremented
for too long frames."
::= { f10IfStaticsEntry 7 }
f10IfInThrottles OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is re-ceived."
::= { f10IfStaticsEntry 8 }
f10IfInRunts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise
well formed."
::= { f10IfStaticsEntry 9 }
f10IfInGiants OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that were
longer than 1518 (1522 Bytes in case of VLAN Tag)
octets (excluding framing bits, but including FCS
octets) and were otherwise well formed. This counter
is not incremented for too long frames."
::= { f10IfStaticsEntry 10 }
f10IfInCRC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that had
a length (ex-cluding framing bits, but including
FCS octets) of between 64 and 1518 octets,
inclusive, but had a bad CRC."
::= { f10IfStaticsEntry 11 }
f10IfInOverruns OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames dropped because
of buffer issue."
::= { f10IfStaticsEntry 12 }
f10IfOutVlanPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good VLAN Tagged Frames sent
successfully."
::= { f10IfStaticsEntry 13 }
f10IfOutUnderruns OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames dropped because
of buffer underrun."
::= { f10IfStaticsEntry 14 }
f10IfOutUnicasts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Unicast Frames sent successfully."
::= { f10IfStaticsEntry 15 }
f10IfOutCollisions OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the frames that due to excessive
or late collisions are not transmitted successfully."
::= { f10IfStaticsEntry 16 }
f10IfOutWredDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the frames that are dropped using
WRED policy because of to excessive traffic."
::= { f10IfStaticsEntry 17 }
f10IfOut64BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was 64 Bytes."
::= { f10IfStaticsEntry 18 }
f10IfOut65To127BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 65 to 127 Bytes."
::= { f10IfStaticsEntry 19 }
f10IfOut128To255BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 128 to 255 Bytes."
::= { f10IfStaticsEntry 20 }
f10IfOut256To511BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 256 to 511 Bytes."
::= { f10IfStaticsEntry 21 }
f10IfOut512To1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was in the range of 512 to 1023 Bytes."
::= { f10IfStaticsEntry 22 }
f10IfOutOver1023BytePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of Good Frames sent successfully
whose size was greater than 1023 Bytes."
::= { f10IfStaticsEntry 23 }
f10IfOutThrottles OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is sent."
::= { f10IfStaticsEntry 24 }
f10IfLastDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion
at which this interface's counters suffered a
discontinuity via a reset. If no such discontinuities
have occurred since the last reinitialization of
the local management subsystem, then this object
contains a zero value."
::= { f10IfStaticsEntry 25 }
-- ### conformance information ###
f10IfExtensionMibConformance OBJECT IDENTIFIER ::= { f10IfExtensionMib 2 }
f10IfExtensionMibCompliances OBJECT IDENTIFIER ::= { f10IfExtensionMibConformance 1 }
f10IfExtensionMibGroups OBJECT IDENTIFIER ::= { f10IfExtensionMibConformance 2 }
-- ## compliance statements
f10IfExtensionMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Force10
IF Extension MIB."
MODULE -- this module
MANDATORY-GROUPS {
f10IfParamsGroup,
f10IfStatsGroup
}
::= { f10IfExtensionMibCompliances 1 }
-- ## units of conformance
f10IfParamsGroup OBJECT-GROUP
OBJECTS {
f10IfIpMtu,
f10IfDuplexMode,
f10IfQueueingStrategy,
f10IfRxFlowCtrl,
f10IfTxFlowCtrl
}
STATUS current
DESCRIPTION
"A collection of objects providing the
Force10 IF Extenstion parameters."
::= { f10IfExtensionMibGroups 1 }
f10IfStatsGroup OBJECT-GROUP
OBJECTS {
f10IfInVlanPkts,
f10IfIn64BytePkts,
f10ifIn65To127BytePkts,
f10IfIn128To255BytePkts,
f10IfIn256To511BytePkts,
f10IfIn512To1023BytePkts,
f10IfInOver1023BytePkts,
f10IfInThrottles,
f10IfInRunts,
f10IfInGiants,
f10IfInCRC,
f10IfInOverruns,
f10IfOutVlanPkts,
f10IfOutUnderruns,
f10IfOutUnicasts,
f10IfOutCollisions,
f10IfOutWredDrops,
f10IfOut64BytePkts,
f10IfOut65To127BytePkts,
f10IfOut128To255BytePkts,
f10IfOut256To511BytePkts,
f10IfOut512To1023BytePkts,
f10IfOutOver1023BytePkts,
f10IfOutThrottles,
f10IfLastDiscontinuityTime
}
STATUS current
DESCRIPTION
"A collection of objects providing the
interface statistics."
::= { f10IfExtensionMibGroups 2 }
END