mibs/MIBS/dell/FORCE10-TRAP-EVENT-MIB

-- *****************************************************************
-- FORCE10-TRAP-ALRM-MIB
--
--
-- Copyright (c) 2003-2005 by Force10 Networks, Inc.
-- All rights reserved.
-- *****************************************************************
--

FORCE10-TRAP-EVENT-MIB DEFINITIONS ::= BEGIN

IMPORTS

        MODULE-IDENTITY, OBJECT-TYPE,
        Integer32,IpAddress, TimeTicks, NOTIFICATION-TYPE
            FROM SNMPv2-SMI
        TEXTUAL-CONVENTION,
		RowStatus,DateAndTime,
        DisplayString,RowPointer
            FROM SNMPv2-TC
        MODULE-COMPLIANCE,
        OBJECT-GROUP
            FROM SNMPv2-CONF
        f10Mgmt
            FROM FORCE10-SMI
        ;
 
f10TrapEventMib   MODULE-IDENTITY
        LAST-UPDATED    "200510050000Z"
        ORGANIZATION    "Force10 Networks, Inc."
        CONTACT-INFO
            "Force10 Networks, Inc
            1440 McCarthy Blvd
            Milpitas, CA 95035
            (408) 571-3500
            support@force10networks.com
            http://www.force10networks.com"
        DESCRIPTION
            "Force10 Trap Alarm MIB.
            Force10 Trap Event MIB allows users to track or to view 
            the trap events logged by the system.  There are two types
            of trap event tables, hostory trap event table and active
            trap event table.

            All the traps sent by the system are logged to history trap
            event table. The trap that need action will logged to active
            trap event table; 'Card down' trap event will go to the active
            trap event table, and the trap will be cleared as soon as
            'Card Up' event is issued. 
            "
        ::= { f10Mgmt 6 }   


f10TrapEventObjects  OBJECT IDENTIFIER ::= { f10TrapEventMib 1 }
f10HistoryTrapEvent  OBJECT IDENTIFIER ::= { f10TrapEventObjects 1 } 
f10ActiveTrapEvent   OBJECT IDENTIFIER ::= { f10TrapEventObjects 2 } 
f10TrapVarbindEvent  OBJECT IDENTIFIER ::= { f10TrapEventObjects 3 } 

-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr


f10ChassisTrapEventId OBJECT-TYPE
    SYNTAX        DateAndTime
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The f10ChassisTrapEventId used the timestamp as the ID
         to uniquely identify the current trap event table.
          
         Each time a NMS connect to F10 Chassis, it should verify
         its f10ChassisTrapEventId.  If the ID is different, it should
         refresh its history and active tables. 

         But, if the f10ChassisTrapEventId is the same, then it should
         query the f10LastTrapEventSeqId and update its history and active
         tables  from its own f10LastTrapEventSeqId to the chassis
         f10LastTrapEventSeqId.
        "
    ::= { f10HistoryTrapEvent 1 }

f10LastTrapEventSeqId OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "
         f10LastTrapEventSeqId is a sequential ID indicated the number of 
         traps sent by the syatem since chassis is loaded.  The same id can
         also be used as the index to the history and active tables.
            
         Anytime, if an NMS dropped its connection with F10 Chassis, it should
         sync up its history tables from its own f10LastTrapEventSeqId to
         the chassis f10LastTrapEventSeqId.
        "
    ::= { f10HistoryTrapEvent 2 }

f10MaxHistoryTableSize OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "
         f10MaxHistoryTableSize is the maximum rows in history table.
		This also limits the active/varbind tables.
		Whenever there is a chance of overflow, the oldest entry 
		will be deleted form the history table.
		Respective entry from active table also will be deleted 
		and the corresponding varbind entries will be deleted 
		from varbind table.
        "
    ::= { f10HistoryTrapEvent 3 }

f10HistoryTrapEventTable OBJECT-TYPE
    SYNTAX SEQUENCE OF F10HistoryTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of history trap event table."
    ::= { f10HistoryTrapEvent 4 }

f10HistoryTrapEventEntry OBJECT-TYPE
    SYNTAX F10HistoryTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of history trap event table.
	"

    INDEX { historyTrapEventSeqId }
    ::= { f10HistoryTrapEventTable 1 }


F10HistoryTrapEventEntry ::= SEQUENCE {
    historyTrapEventSeqId 	Integer32,
    historyTrapEventSeverity 	Integer32,
    historyTrapEventType 	Integer32,
    historyTrapEventMsg 	DisplayString,
    historyTrapEventOid 	RowPointer,
    historyTrapEventSlotPort 	Integer32,
    historyTrapEventTimeStamp 	TimeTicks

    }

historyTrapEventSeqId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         historyTrapEventSeqId is a sequential ID and the index to
         history trap table.
        "
    ::= { f10HistoryTrapEventEntry 1 }

historyTrapEventSeverity OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap severity level. 
        "
    ::= { f10HistoryTrapEventEntry 2 }

historyTrapEventType OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap category type.  
        "
    ::= { f10HistoryTrapEventEntry 3 }

historyTrapEventMsg OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The message or the description of the trap.
        "
    ::= { f10HistoryTrapEventEntry 4 }

historyTrapEventOid OBJECT-TYPE
    SYNTAX RowPointer
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The OID of this trap.
        "
    ::= { f10HistoryTrapEventEntry 5 }

historyTrapEventSlotPort OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The slot or port number that relate to this trap.
         for example if card is down, this field will have the
         card slot number.
        "
    ::= { f10HistoryTrapEventEntry 6 }

historyTrapEventTimeStamp OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The timestamp when the trap is sent.
        "
    ::= { f10HistoryTrapEventEntry 7 }

-- End of historyTrapEventTable


-- Active Trap Event table.

f10ActiveTrapEventTable OBJECT-TYPE
    SYNTAX SEQUENCE OF F10ActiveTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of active trap event table."
    ::= { f10ActiveTrapEvent 1 }

f10ActiveTrapEventEntry OBJECT-TYPE
    SYNTAX F10ActiveTrapEventEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of active trap event table.
	"

    INDEX { activeTrapEventSeqId }
    ::= { f10ActiveTrapEventTable 1 }


F10ActiveTrapEventEntry ::= SEQUENCE {
    activeTrapEventSeqId 	Integer32,
    activeTrapEventSeverity 	Integer32,
    activeTrapEventType 	Integer32,
    activeTrapEventMsg 		DisplayString,
    activeTrapEventOid 		RowPointer,
    activeTrapEventSlotPort 	Integer32,
    activeTrapEventTimeStamp 	TimeTicks

    }

activeTrapEventSeqId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         activeTrapEventSeqId is a sequential ID and the index to
         active trap table.
        "
    ::= { f10ActiveTrapEventEntry 1 }

activeTrapEventSeverity OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap severity level.
        "
    ::= { f10ActiveTrapEventEntry 2 }

activeTrapEventType OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap category type.
        "
    ::= { f10ActiveTrapEventEntry 3 }

activeTrapEventMsg OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The message or the description of the trap.
        "
    ::= { f10ActiveTrapEventEntry 4 }

activeTrapEventOid OBJECT-TYPE
    SYNTAX RowPointer
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The OID of this trap.
        "
    ::= { f10ActiveTrapEventEntry 5 }

activeTrapEventSlotPort OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The numeric iof slot or port that relate to this trap.
         for example if card is down, this field will have the
         card slot number.
        "
    ::= { f10ActiveTrapEventEntry 6 }

activeTrapEventTimeStamp OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The timestamp when the trap is sent.
        "
    ::= { f10ActiveTrapEventEntry 7 }

-- End of ActiveTrapEventTable

-- Trap Event varbind table.

f10TrapEventVarbindTable OBJECT-TYPE
    SYNTAX SEQUENCE OF F10TrapEventVarbindEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of trap event varbind table."
    ::= { f10TrapVarbindEvent 1 }

f10TrapEventVarbindEntry OBJECT-TYPE
    SYNTAX F10TrapEventVarbindEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of trap event varbind table.
	"
    INDEX { trapEventVarbindSeqId, trapEventVarbindId }
    ::= { f10TrapEventVarbindTable 1 }


F10TrapEventVarbindEntry ::= SEQUENCE {
    trapEventVarbindSeqId 	Integer32,
    trapEventVarbindId 		Integer32,
    trapEventVarbindOid		OBJECT IDENTIFIER,
    trapEventVarbindType 	Integer32,
    trapEventVarbindValue 	DisplayString
    }

trapEventVarbindSeqId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         trapEventVarbindSeqId is a sequential ID and the index to
         varbind trap table.
        "
    ::= { f10TrapEventVarbindEntry 1 }

trapEventVarbindId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "
         trapEventVarbindId is the ID and the index to
         history trap table.
        "
    ::= { f10TrapEventVarbindEntry 2 }

trapEventVarbindOid OBJECT-TYPE
    SYNTAX OBJECT IDENTIFIER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The OID of this trap.
        "
    ::= { f10TrapEventVarbindEntry 3 }

trapEventVarbindType OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         The trap category type.
        "
    ::= { f10TrapEventVarbindEntry 4 }

trapEventVarbindValue OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "
         This is the result or data in this trap.
        "
    ::= { f10TrapEventVarbindEntry 5 }

END