david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/dlink/DLINKSW-AAA-SERVER-MIB

993 lines
35 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-AAA-SERVER-MIB: D-Link AAA Server MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-AAA-SERVER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndex
FROM IF-MIB
dAaaMIBObjects
FROM DLINKSW-AAA-COMMON-MIB;
dlinkSwAAAServerMIB MODULE-IDENTITY
LAST-UPDATED "201307180000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
"D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB provides configuration and statistics reflecting the state
of AAA Server operation within the device and AAA communications
with external servers.
AAA stands for authentication, authorization, and accounting
The AAA Server MIB provides the following information:
1) A Table for configuring AAA servers
2) Identities of external AAA servers
3) Distinct statistics for each AAA function
4) Status of servers providing AAA functions
A server is defined as a logical entity which provides any of the
three AAA functions. A TACACS+ server consists of all three
functions with a single IP address and single TCP port.
A RADIUS server consists of the authentication/accounting pair
with a single IP address but distinct UDP ports, or it may be
just one of authentication or accounting. It is possible to have
two distinct RADIUS servers at the same IP address, one providing
authentication only, the other accounting only.
Note: Regarding RADIUS server statistics please refer to
RADIUS-AUTH-CLIENT-MIB (RFC2618) and RADIUS-ACCT-CLIENT-MIB (RFC2620)
"
REVISION "201307180000Z"
DESCRIPTION
"This is the first version of the MIB file.
"
::= { dAaaMIBObjects 2 }
DlinkAAAProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Protocol used with this server.
none(0) - No protocol specified, this value is read-only.
tacacsplus(1) - TACACS+
radius(2) - RADIUS
"
REFERENCE
"
RFC 2865 Remote Authentication Dial In User Service
(RADIUS)
RFC 2866 RADIUS Accounting
The TACACS+ Protocol Version 1.78, Internet Draft
"
SYNTAX INTEGER {
none(0),
tacacsplus(1),
radius(2)
}
DlinkAAAGroupName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "32a"
STATUS current
DESCRIPTION
"Represents group name.
The following name are reserved and cannot be created by user:
enable, none, local, tacacs, xtacacs, tacacs+, radius
"
SYNTAX OCTET STRING (SIZE(0..32))
VrfName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents VRF name.
"
SYNTAX OCTET STRING (SIZE(1..32))
-- -----------------------------------------------------------------------------
dAaaSrvMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwAAAServerMIB 0 }
dAaaSrvMIBObjects OBJECT IDENTIFIER ::= { dlinkSwAAAServerMIB 1 }
dAaaSrvMIBConformance OBJECT IDENTIFIER ::= { dlinkSwAAAServerMIB 2 }
-- -----------------------------------------------------------------------------
dasConfig OBJECT IDENTIFIER ::= { dAaaSrvMIBObjects 1 }
-- -----------------------------------------------------------------------------
dasServerConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DasServerConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of configurations for each
AAA server. An entry is created/removed when a new server
is created/removed.
The following table describes examples of AAA servers.
Protocol Index AddressType IPv6Address AuthenPort AcctPort Key Priority
---------- ----- ----------- ------------- ---------- -------- ------ --------
tacacsplus 1 ipv6 2000::2 49 0 1
tacacsplus 2 ipv4 10.0.0.1 49 0 3
tacacsplus 3 ipv4 192.168.1.254 49 0 2
radius 1 ipv4 192.168.1.254 1812 1813 1
radius 2 ipv4 20.0.0.12 1812 1813 2
"
::= { dasConfig 1 }
dasServerConfigEntry OBJECT-TYPE
SYNTAX DasServerConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consists of an AAA server configuration.
An entry is created/removed when a server is defined
or undefined with configuration commands via CLI
or by issuing appropriate SNMP sets.
A management station wishing to create an entry should
first generate a random number to be used as the index
to this sparse table. The station should then create the
associated instance of the row status and row index objects.
dasServerPriority is automatically assigned once the entry is
made active and reflects the relative priority of the
defined server with respect to already configured servers.
Newly-created servers will be assigned the lowest priority.
To reassign server priorities to existing server entries,
it may be necessary to destroy and recreate entries in order
of priority.
Upon reload, dasServerIndex values may be changed, but the
priorities that were saved before reload will be retained,
with lowest priority number corresponding to the higher
priority servers.
"
INDEX {
dasServerProtocol,
dasServerIndex
}
::= { dasServerConfigTable 1}
DasServerConfigEntry ::= SEQUENCE {
dasServerProtocol DlinkAAAProtocol,
dasServerIndex Unsigned32,
dasServerAddrType InetAddressType,
dasServerAddress InetAddress,
dasServerAuthenPort Unsigned32,
dasServerAcctPort Unsigned32,
dasServerKey DisplayString,
dasServerTimeout Unsigned32,
dasServerRetransmit Unsigned32,
dasServerPriority Unsigned32,
dasServerRowStatus RowStatus
}
dasServerProtocol OBJECT-TYPE
SYNTAX DlinkAAAProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The variable indicates the protocol of the corresponding AAA server.
"
::= { dasServerConfigEntry 1 }
dasServerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A management station wishing to initiate a new AAA server
configuration should use a random value for this object
when creating an instance of dasServerConfigEntry.
"
::= { dasServerConfigEntry 2 }
dasServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the address type of the AAA server.
"
::= { dasServerConfigEntry 3 }
dasServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the server.
"
::= { dasServerConfigEntry 4 }
dasServerAuthenPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"UDP/TCP port used for authentication in the configuration
For TACACS+, this object should be explicitly set.
Default value is 1812 for RADIUS.
"
DEFVAL { 1812 }
::= { dasServerConfigEntry 5 }
dasServerAcctPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"UDP/TCP port used for accounting service in the configuration
For TACACS+, the value of dasServerAcctPort is ignored.
dasServerAuthenPort will be used instead.
Default value is 1813 for RADIUS.
"
DEFVAL { 1813 }
::= { dasServerConfigEntry 6 }
dasServerKey OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..254))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The server key to be used with this server.
The maximum length for RADIUS is 32 characters.
The maximum length for TACACS+ is 254 characters.
When read, a zero length string will be returned for security reasons.
"
DEFVAL { "" }
::= { dasServerConfigEntry 7 }
dasServerTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time in seconds for waiting server reply.
Default value is 5 seconds.
"
DEFVAL { 5 }
::= { dasServerConfigEntry 8 }
dasServerRetransmit OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The retransmit times of requests to the server
when no response is received.
For TACACS+, the value of dasServerRetransmit is ignored.
Default value is 2 for RADIUS.
"
DEFVAL { 2 }
::= { dasServerConfigEntry 9}
dasServerPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number that indicates the priority of the server in
this entry. Lower numbers indicate higher priority.
"
::= { dasServerConfigEntry 10 }
dasServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry.
"
::= { dasServerConfigEntry 99 }
-- -----------------------------------------------------------------------------
dasRadiusServerDeadTime OBJECT-TYPE
SYNTAX Unsigned32 (0..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the default duration
of time to skip the unresponsive server.
The valid range is 0 to 1440 (24 hours).
When setting to 0, the unresponsive server
will not be marked as dead.
The default value is 0.
"
DEFVAL { 0 }
::= { dasConfig 2 }
-- -----------------------------------------------------------------------------
dasStatistics OBJECT IDENTIFIER ::= { dAaaSrvMIBObjects 2 }
dasTacplusStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DasTacplusStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of statistics for each TACACS+ server.
The following table describes examples of TACACS+ servers statistics.
Protocol Index SocketOpens SocketCloses TotalPktSend TotalPktRecv ReferenceCount
---------- ----- ----------- ------------ ------------ ------------ --------------
tacacsplus 1 1 1 0 0 0
tacacsplus 2 5 5 20 20 5
tacacsplus 3 10 10 25 25 10
"
::= { dasStatistics 1 }
dasTacplusStatisticsEntry OBJECT-TYPE
SYNTAX DasTacplusStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consists of statistical information about a particular server.
Objects in this table are read-only and appear automatically whenever a
TACACS+ server in the dasServerConfigTable is made active.
"
AUGMENTS { dasServerConfigEntry }
::= { dasTacplusStatisticsTable 1 }
DasTacplusStatisticsEntry::= SEQUENCE {
dasTacplusSocketOpens Counter32,
dasTacplusSocketCloses Counter32,
dasTacplusTotalPktSent Counter32,
dasTacplusTotalPktRecv Counter32,
dasTacplusReferenceCount Counter32
}
dasTacplusSocketOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful TCP socket connections to the TACACS+ server.
"
::= { dasTacplusStatisticsEntry 1 }
dasTacplusSocketCloses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully closed TCP socket attempts.
"
::= { dasTacplusStatisticsEntry 2 }
dasTacplusTotalPktSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent to the TACACS+ server
"
::= { dasTacplusStatisticsEntry 3 }
dasTacplusTotalPktRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received from the TACACS+ server.
"
::= { dasTacplusStatisticsEntry 4 }
dasTacplusReferenceCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received from the TACACS+ server.
"
::= { dasTacplusStatisticsEntry 5 }
-- -----------------------------------------------------------------------------
dasGroup OBJECT IDENTIFIER ::= { dAaaSrvMIBObjects 3 }
dasGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DasGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of configurations for each
AAA server group. An entry is created/removed when a new server group
is created/removed.
The following table describes examples of AAA groups.
Protocol Name
---------- ----------
tacacsplus tac_con
tacacsplus tac_telnet
radius rad_acct
radius rad_ssh
"
::= { dasGroup 1 }
dasGroupEntry OBJECT-TYPE
SYNTAX DasGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An AAA server group configuration identified by its protocol,
and its name.
An entry is created/removed when a server group is defined
or undefined with configuration commands via CLI
or by issuing appropriate sets to this table using snmp.
"
INDEX {
dasGroupProtocol,
dasGroupName
}
::= { dasGroupTable 1}
DasGroupEntry ::= SEQUENCE {
dasGroupProtocol DlinkAAAProtocol,
dasGroupName DlinkAAAGroupName,
dasGroupRowStatus RowStatus
}
dasGroupProtocol OBJECT-TYPE
SYNTAX DlinkAAAProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The variable denotes the protocol used by the
managed device with the AAA group corresponding to
this entry in the table.
"
::= { dasGroupEntry 1 }
dasGroupName OBJECT-TYPE
SYNTAX DlinkAAAGroupName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The server group name.
"
DEFVAL { "" }
::= { dasGroupEntry 2 }
dasGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. Once the entry status is
set to active, the associated entry cannot be modified
except destroyed by setting this object to destroy(6).
"
::= { dasGroupEntry 3 }
-- dasGroupServerTable
dasGroupServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DasGroupServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of configurations for each
AAA server group. An entry is created/removed when a new server group
is created/removed.
The following table describes examples of AAA server groups.
Protocol Name SrvIndex AddressType IPv6Address Priority
---------- ---------- -------- ------------- ------------- --------
tacacsplus tac_con 1 ipv6 2000::2 1
tacacsplus tac_telnet 2 ipv4 10.0.0.1 2
tacacsplus tac_telnet 3 ipv4 192.168.1.254 3
radius rad_ssh 1 ipv4 20.0.0.12 1
radius rad_ssh 2 ipv4 20.0.0.13 2
radius rad_ssh 3 ipv4 20.0.0.14 3
radius rad_ssh 4 ipv4 20.0.0.15 4
"
::= { dasGroup 2 }
dasGroupServerEntry OBJECT-TYPE
SYNTAX DasGroupServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An AAA server group configuration identified by its protocol,
its name and its index.
An entry is created/removed when a server group is defined
or undefined with configuration commands via CLI
or by issuing appropriate sets to this table using snmp.
A management station wishing to create an entry should
first generate a random number to be used as the index
to this sparse table.
dasGroupSrvPriority is automatically assigned once the entry is
made active and reflects the relative priority of the
defined server with respect to already configured servers.
Newly-created servers will be assigned the lowest priority.
To reassign server priorities to existing server entries,
it may be necessary to destroy and recreate entries in order
of priority.
Upon reload, dasGroupSrvIndex values may be changed, but the
priorities that were saved before reload will be retained,
with lowest priority number corresponding to the higher
priority servers.
"
INDEX {
dasGroupProtocol,
dasGroupName,
dasGroupSrvIndex
}
::= { dasGroupServerTable 1}
DasGroupServerEntry ::= SEQUENCE {
dasGroupSrvIndex Unsigned32,
dasGroupSrvAddrType InetAddressType,
dasGroupSrvAddress InetAddress,
dasGroupSrvPriority Unsigned32,
dasGroupServerRowStatus RowStatus
}
dasGroupSrvIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A management station wishing to initiate a new AAA server
group configuration should use a random value for this object
when creating an instance of dasGroupEntry.
The RowStatus semantics of the dasGroupConfigRowStatus object
will prevent access conflicts.
"
::= { dasGroupServerEntry 1 }
dasGroupSrvAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of network address denoted
in dasGroupSrvAddress object.
"
::= { dasGroupServerEntry 2 }
dasGroupSrvAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the server of the entry.
"
::= { dasGroupServerEntry 3 }
dasGroupSrvPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number that indicates the priority of the server in
this group. Lower numbers indicate higher priority.
"
::= { dasGroupServerEntry 4 }
dasGroupServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. Once the entry status is
set to active, the associated entry cannot be modified
except destroyed by setting this object to destroy(6).
"
::= { dasGroupServerEntry 5 }
-- -----------------------------------------------------------------------------
dasVrf OBJECT IDENTIFIER ::= { dAaaSrvMIBObjects 4 }
dasGroupVrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DasGroupVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows current VRF configurations for each
AAA server group, allows existing VRF to be removed
and new ones to be created.
The following table describes the examples of VRF setting for AAA
server groups.
Protocol group Name VRF name
---------- ---------- ----------
tacacsplus tac_con vrf1
tacacsplus tac_telnet vrf_taplus
radius rad_acct vrf_radius
radius rad_ssh vrf_100
"
::= { dasVrf 1 }
dasGroupVrfEntry OBJECT-TYPE
SYNTAX DasGroupVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An AAA group VRF configuration identified by its protocol
and its group name.
An entry is created/removed when a VRF setting is defined
or undefined with configuration commands via CLI
or by issuing appropriate sets to this table using snmp.
When a group VRF configuration is deleted, indicates the
server group will use the global (default) routing table.
"
INDEX {
dasGroupProtocol,
dasGroupName
}
::= { dasGroupVrfTable 1}
DasGroupVrfEntry ::= SEQUENCE {
dasGroupVrfName VrfName,
dasGroupVrfConfigRowStatus RowStatus
}
dasGroupVrfName OBJECT-TYPE
SYNTAX VrfName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VRF name of the entry.
"
::= { dasGroupVrfEntry 1 }
dasGroupVrfConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry.
"
::= { dasGroupVrfEntry 2 }
-- -----------------------------------------------------------------------------
dasSrcIf OBJECT IDENTIFIER ::= { dAaaSrvMIBObjects 5 }
dasGroupSrcIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DasGroupSrcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of source interface configurations
for each AAA server group.
"
::= { dasSrcIf 1 }
dasGroupSrcIfEntry OBJECT-TYPE
SYNTAX DasGroupSrcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An AAA group source interface configuration identified
by its protocol and its group name.
An entry is created/removed when a source interface setting
is defined or undefined with configuration commands via CLI
or by issuing appropriate sets to this table using snmp.
Note: The group name of radius and tacacs+ are reserved group
names and its corresponding source interface is global setting
for RADIUS and TACACS+ servers respectively. If both global
and group-specific have the source interface settings,
the setting of group-specific takes precedence.
"
INDEX {
dasGroupProtocol,
dasGroupName,
dasGroupSrcAddrType
}
::= { dasGroupSrcIfTable 1}
DasGroupSrcIfEntry ::= SEQUENCE {
dasGroupSrcAddrType InetAddressType,
dasGroupSrcIfIndex InterfaceIndex,
dasGroupSrcIfConfigRowStatus RowStatus
}
dasGroupSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the address which will be used
as source address for sending RADIUS packets.
"
::= { dasGroupSrcIfEntry 1 }
dasGroupSrcIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the interface whose IP/IPv6
address will be used as source IP/IPv6 address for sending RADIUS packets.
"
::= { dasGroupSrcIfEntry 2 }
dasGroupSrcIfConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry.
"
::= { dasGroupSrcIfEntry 3 }
-- -----------------------------------------------------------------------------
dasClear OBJECT IDENTIFIER ::= { dAaaSrvMIBObjects 6 }
dasClearServerStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF DasClearServerStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to clear statistics of the AAA servers.
"
::= { dasClear 1 }
dasClearServerStatEntry OBJECT-TYPE
SYNTAX DasClearServerStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry which can be used to clear the statistics of the AAA server.
"
INDEX {
dasServerProtocol,
dasServerIndex
}
::= { dasClearServerStatTable 1}
DasClearServerStatEntry ::= SEQUENCE {
dasClearServerStatAction INTEGER
}
dasClearServerStatAction OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear statistics of an AAA server when set
to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= { dasClearServerStatEntry 1 }
-- -----------------------------------------------------------------------------
dasClearServerStatByGroup OBJECT-TYPE
SYNTAX DlinkAAAGroupName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear AAA server statistics based on group name.
Setting this object to the group name which you want to clear.
When read, a zero length string is returned."
::= {dasClear 2}
dasClearServerStatByProtocol OBJECT-TYPE
SYNTAX DlinkAAAProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear AAA server statistics based on protocol.
Setting this object to the protocol which you want to clear.
When read, none(0) is returned."
::= {dasClear 3}
dasClearAllServerStat OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear all AAA server statistics when set
to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= {dasClear 4}
-- ******************************************************************
-- Conformance and Compliance
-- ******************************************************************
dasMIBCompliances OBJECT IDENTIFIER ::= { dAaaSrvMIBConformance 1 }
-- compliance statements
dasMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-AAA-SERVER-MIB."
MODULE -- this module
MANDATORY-GROUPS {
dasConfigGroup,
dasTacplusStatisticsGroup
}
GROUP dasSrvGroupGroup
DESCRIPTION
"This group is mandatory only for the platform which supports
AAA server group configuration.
"
GROUP dasVrfGroup
DESCRIPTION
"This group is mandatory only for the platform which supports
AAA VRF configuration.
"
GROUP dasSrcIfGroup
DESCRIPTION
"This group is mandatory only for the platform which supports
AAA source interface configuration.
"
GROUP dasClearStatGroup
DESCRIPTION
"This group is mandatory only for the platform which supports
clear server statistics.
"
OBJECT dasServerAddrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required after server entry created."
OBJECT dasServerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required after server entry created."
OBJECT dasServerKey
MIN-ACCESS read-only
DESCRIPTION
"The maximum length of RADIUS server host is 32 characters.
The maximum length of TACACS+ server host 254 characters.
When read, a zero length string will be returned for security reasons."
::= { dasMIBCompliances 1 }
-- units of conformance
dasMIBGroups OBJECT IDENTIFIER ::= { dAaaSrvMIBConformance 2 }
dasTacplusStatisticsGroup OBJECT-GROUP
OBJECTS {
dasTacplusSocketOpens,
dasTacplusSocketCloses,
dasTacplusTotalPktSent,
dasTacplusTotalPktRecv,
dasTacplusReferenceCount
}
STATUS current
DESCRIPTION
"Objects for providing AAA tacacs+ server statistics and status.
"
::= { dasMIBGroups 1 }
dasConfigGroup OBJECT-GROUP
OBJECTS {
dasRadiusServerDeadTime,
dasServerAddrType,
dasServerAddress,
dasServerAuthenPort,
dasServerAcctPort,
dasServerTimeout,
dasServerRetransmit,
dasServerKey,
dasServerPriority,
dasServerRowStatus
}
STATUS current
DESCRIPTION
"Objects for configuring the AAA servers.
"
::= { dasMIBGroups 2 }
dasSrvGroupGroup OBJECT-GROUP
OBJECTS {
dasGroupRowStatus,
dasGroupSrvAddrType,
dasGroupSrvAddress,
dasGroupSrvPriority,
dasGroupServerRowStatus
}
STATUS current
DESCRIPTION
"Objects for configuring the AAA server groups.
"
::= { dasMIBGroups 3 }
dasVrfGroup OBJECT-GROUP
OBJECTS {
dasGroupVrfName,
dasGroupVrfConfigRowStatus
}
STATUS current
DESCRIPTION
"Objects for configuring the AAA VRF setting.
"
::= { dasMIBGroups 4 }
dasSrcIfGroup OBJECT-GROUP
OBJECTS {
dasGroupSrcIfIndex,
dasGroupSrcIfConfigRowStatus
}
STATUS current
DESCRIPTION
"Objects for configuring the AAA source interface setting.
"
::= { dasMIBGroups 5 }
dasClearStatGroup OBJECT-GROUP
OBJECTS {
dasClearServerStatAction,
dasClearServerStatByGroup,
dasClearServerStatByProtocol,
dasClearAllServerStat
}
STATUS current
DESCRIPTION
"Objects for clear the AAA server statistics.
"
::= { dasMIBGroups 6 }
END
Reference in New Issue Copy Permalink