mibs/MIBS/dlink/DLINKSW-DOS-PREVENT-MIB

399 lines
16 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-DOS-PREVENT-MIB.mib : DoS (Denial of Service) Prevention MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-DOS-PREVENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-IDENTITY,OBJECT-TYPE,Unsigned32,Counter64,IpAddress
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndexOrZero
FROM IF-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwDosPrevMIB MODULE-IDENTITY
LAST-UPDATED "201305300000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB contains managed objects for the DOS Protection
application of the device."
REVISION "201305300000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { dlinkIndustrialCommon 59 }
--
-- Textual conventions
--
DosAttackType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type indicates a well-known DoS type which can be detected.
Note that a particular agent may support only certain DoS attack
types. Thus, the valid values of this object are project
dependent. An agent may respond with an error
(e.g., 'inconsistentValue ') to a management SET operation which
attempts to modify the value to one which is not supported by the
managed device."
SYNTAX INTEGER{
landAttack(1),
blatAttack(2),
smurfAttack(3),
tcpNullScan(4),
tcpXmasScan(5),
tcpSynFin(6),
tcpSynSrcPortLess1024(7),
arpMacSaMismatch(8),
fraggleAttack(9),
icmpRedirectAttack(10),
icmpUnreachableAttack(11),
ipRouteRecordAttack(12),
ipSourceRouteAttack(13),
pingDeathAttack(14),
tcpFlagSynRst(15),
tcpOverMacMcbc(16),
tcpSynWithData(17),
tcpTinyFragAttack(18),
tcpUdpPortZero(19),
tracertAttack(20),
winNukeAttack(21),
pingFlood(22),
synFlood(23),
teardrop(24),
all(999) }
-- ***************************************************************************
-- Node definitions
-- ***************************************************************************
dDosPrevMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwDosPrevMIB 0 }
dDosPrevMIBObjects OBJECT IDENTIFIER ::= { dlinkSwDosPrevMIB 1 }
dDosPrevMIBConformance OBJECT IDENTIFIER ::= { dlinkSwDosPrevMIB 2 }
-- ***************************************************************************
-- dDosPrevMIBObjects
-- ***************************************************************************
dDosPrevGlobalNotifsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 'true' to enable global SNMP notification
for DoS prevention feature. Setting the object to
'false' will disable SNMP notifications."
DEFVAL { false }
::= { dDosPrevMIBObjects 1}
dDosPrevNotifyInfo OBJECT IDENTIFIER ::= { dDosPrevMIBObjects 2 }
dDosPrevNotiInfoDropFramesCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the total dropped packets due to DoS attack
in the past 5 minutes."
::= { dDosPrevNotifyInfo 1 }
dDosPrevNotiInfoDropIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"If the DoS packet is from the end station, represent the IP address of attacker;
otherwise represent the router's IP."
::= { dDosPrevNotifyInfo 2 }
dDosPrevNotiInfoDropPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the attacked port number."
::= { dDosPrevNotifyInfo 3 }
dDosPrevCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDosPrevCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table includes the settings of all DoS prevention
types supported by the Switch.
Note: the special attack type 'all' is not included
in this table."
::= { dDosPrevMIBObjects 3 }
dDosPrevCtrlEntry OBJECT-TYPE
SYNTAX DDosPrevCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry in the DoS prevention control table."
INDEX { dDoSPrevCtrlAttackType }
::= { dDosPrevCtrlTable 1 }
DDosPrevCtrlEntry ::= SEQUENCE {
dDoSPrevCtrlAttackType DosAttackType,
dDoSPrevCtrlEnabled TruthValue,
dDoSPrevCtrlActionType INTEGER,
dDoSPrevCtrlRedirectPort InterfaceIndexOrZero,
dDoSPrevCtrlRedirectPriority INTEGER,
dDoSPrevCtrlRedirectRateLimit Unsigned32
}
dDoSPrevCtrlAttackType OBJECT-TYPE
SYNTAX DosAttackType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the DoS attack type."
::= { dDosPrevCtrlEntry 1 }
dDoSPrevCtrlEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the state of the DoS attack type.
Setting this object to 'false' will reset other columnar
objects in the same row."
DEFVAL { false }
::= { dDosPrevCtrlEntry 2 }
dDoSPrevCtrlActionType OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
redirect(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the action for the DoS prevention type.
If this object is set to 'redirect' and dDoSPrevCtrlEnabled is
'true', the configuration will not take effect until a valid
redirect port (dDoSPrevCtrlRedirectPort) is specified. If redirect
port is not valid, the switch behaves same as 'drop' is set."
DEFVAL { drop }
::= { dDosPrevCtrlEntry 3 }
dDoSPrevCtrlRedirectPort OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port to which the attacking packet will
be redirected. A value of 0 means redirect port is unspecified.
This object can only be modified for entries whose value of
dDoSPrevCtrlEnabled is 'true' and dDoSPrevCtrlActionType is
'redirect'. Otherwise, inconsistentValue error will be returned."
DEFVAL { 0 }
::= { dDosPrevCtrlEntry 4 }
dDoSPrevCtrlRedirectPriority OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the priority for the redirected attacking
packets. Valid priority values are from 0 to 7.
A value of 8 indicates that the original priority will not be
changed when the packet is redirected.
This object can only be modified for entries whose value of
dDoSPrevCtrlEnabled is 'true', dDoSPrevCtrlActionType is
'redirect' and dDoSPrevCtrlRedirectPort is specified.
Otherwise, inconsistentValue error will be returned."
DEFVAL { 8 }
::= { dDosPrevCtrlEntry 5 }
dDoSPrevCtrlRedirectRateLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
UNITS "kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the rate-limit (kilobit per second) for
redirecting DoS attacking packets.
The valid range and granularity is project dependent.
A value of 0 indicates that there is no limit for redirecting
DoS attacking packets.
This object can only be modified for entries whose value of
dDoSPrevCtrlEnabled is 'true', dDoSPrevCtrlActionType is
'redirect' and dDoSPrevCtrlRedirectPort is specified.
Otherwise, inconsistentValue error will be returned."
DEFVAL { 0 }
::= { dDosPrevCtrlEntry 6 }
dDoSPrevCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDoSPrevCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the counters of DoS prevention
types supported by the Switch.
This table only contains one entry of attack type is 'all' if per
DoS-type counters is not supported."
::= { dDosPrevMIBObjects 4 }
dDoSPrevCounterEntry OBJECT-TYPE
SYNTAX DDoSPrevCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry in the DoS prevention counter table."
INDEX { dDoSPrevCounterAttackType }
::= { dDoSPrevCounterTable 1 }
DDoSPrevCounterEntry ::= SEQUENCE {
dDoSPrevCounterAttackType DosAttackType,
dDoSPrevCounterFrameCount Counter64,
dDoSPrevCounterClearCounter INTEGER
}
dDoSPrevCounterAttackType OBJECT-TYPE
SYNTAX DosAttackType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the DoS attack type."
::= { dDoSPrevCounterEntry 1 }
dDoSPrevCounterFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of frames detected for
the DoS attack prevention type."
::= { dDoSPrevCounterEntry 2 }
dDoSPrevCounterClearCounter OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
noOp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to reset the counter of the specific
attack type when set to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
DEFVAL { noOp }
::= { dDoSPrevCounterEntry 3 }
-- ***************************************************************************
-- Notifications
-- ***************************************************************************
dDosPreveAttackDetected NOTIFICATION-TYPE
OBJECTS { dDosPrevNotiInfoDropFramesCount }
STATUS current
DESCRIPTION
"This trap is sent when dDosPrevGlobalNotifsEnabled is 'true' and
the DoS attack occurs in the past 5 minutes."
::= { dDosPrevMIBNotifications 1 }
dDosPreveAttackDetectedPacket NOTIFICATION-TYPE
OBJECTS {
dDoSPrevCtrlAttackType,
dDosPrevNotiInfoDropIpAddr,
dDosPrevNotiInfoDropPortNumber
}
STATUS current
DESCRIPTION
"This trap is sent when dDosPrevGlobalNotifsEnabled is 'true' and
the DoS attack occurs to detect the dropped attack packets."
::= { dDosPrevMIBNotifications 2 }
-- ***************************************************************************
-- Conformance
-- ***************************************************************************
dDosPrevMIBCompliances
OBJECT IDENTIFIER ::= { dDosPrevMIBConformance 1 }
dDosPrevMIBGroups
OBJECT IDENTIFIER ::= { dDosPrevMIBConformance 2 }
dDosPrevMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the DoS Prevention MIB."
MODULE -- this module
MANDATORY-GROUPS {
dDosPrevBasicGroup,
dDosPrevNotifyObjectGroup,
dDosPrevNotificationsGroup
}
GROUP dDosPrevActionRedirectCtrlGroup
DESCRIPTION
"This group need not be implemented if only support 'drop' for DoS
attack."
::= { dDosPrevMIBCompliances 1 }
dDosPrevBasicGroup OBJECT-GROUP
OBJECTS {
dDoSPrevCtrlEnabled,
dDoSPrevCounterFrameCount,
dDoSPrevCounterClearCounter
}
STATUS current
DESCRIPTION
"The collection of objects provides basic control for DoS
Prevention."
::= { dDosPrevMIBGroups 1 }
dDosPrevActionRedirectCtrlGroup OBJECT-GROUP
OBJECTS {
dDoSPrevCtrlActionType,
dDoSPrevCtrlRedirectPort,
dDoSPrevCtrlRedirectPriority,
dDoSPrevCtrlRedirectRateLimit
}
STATUS current
DESCRIPTION
"The collection of objects provides the advanced action control for
DoS Prevention."
::= { dDosPrevMIBGroups 2 }
dDosPrevNotifyObjectGroup OBJECT-GROUP
OBJECTS {
dDosPrevGlobalNotifsEnabled,
dDosPrevNotiInfoDropFramesCount,
dDosPrevNotiInfoDropIpAddr,
dDosPrevNotiInfoDropPortNumber
}
STATUS current
DESCRIPTION
"The collection of objects provides the control and information of
DoS notifications."
::= { dDosPrevMIBGroups 3 }
dDosPrevNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
dDosPreveAttackDetected,
dDosPreveAttackDetectedPacket
}
STATUS current
DESCRIPTION
"The collection of objects provides DoS notifications."
::= { dDosPrevMIBGroups 4 }
END