david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/dlink/DLINKSW-IP-EXT-MIB

1316 lines
49 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-IP-EXT-MIB.mib : IP Extension MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-IP-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
IpAddress,
Integer32,
Unsigned32
FROM SNMPv2-SMI
RowStatus,
TruthValue,
DisplayString,
MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
InetPortNumber,
InetAddressType,
InetAddress,
InetAddressIPv4,
InetAddressIPv6,
InetAddressPrefixLength
FROM INET-ADDRESS-MIB
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwIpExtMIB MODULE-IDENTITY
LAST-UPDATED "201309180000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB is an extension to the standard IP-MIB."
REVISION "201308060000Z"
DESCRIPTION
"Initial version of this MIB."
REVISION "201308290000Z"
DESCRIPTION
"1.Add dIpExtGratuitousARPDadReplyEnabled."
REVISION "201309180000Z"
DESCRIPTION
"1.Remove dIpExtDhcpClientIfRowStatus(Note:follow IP interface).
2.Update dIpExtDhcpClientIfLeaseDay value range(Note:follow UIS)."
::= { dlinkIndustrialCommon 75 }
-- -----------------------------------------------------------------------------
dIpExtMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwIpExtMIB 0 }
dIpExtMIBObjects OBJECT IDENTIFIER ::= { dlinkSwIpExtMIB 1 }
dIpExtMIBConformance OBJECT IDENTIFIER ::= { dlinkSwIpExtMIB 2 }
-- -----------------------------------------------------------------------------
dIpExtGratuitousARPTrap NOTIFICATION-TYPE
OBJECTS {
dIpExtGratuitousARPIpAddr,
dIpExtGratuitousARPMacAddr,
dIpExtGratuitousARPPortNumber,
dIpExtIfCfgIfIndex
}
STATUS current
DESCRIPTION
"This trap is sent when there is an IP address conflict."
::={dIpExtMIBNotifications 1}
-- -----------------------------------------------------------------------------
dIpExtGenArpMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 1}
dIpExtClearArpCacheAll OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear all dynamic ARP entries from the
table when set to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
DEFVAL { noOp }
::= { dIpExtGenArpMgmt 1 }
dIpExtClearArpCacheByIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the interface on which
the dynamic ARP entries will be cleared.
When read, a value of 0 is returned."
::= { dIpExtGenArpMgmt 2 }
dIpExtTotalArpEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of ARP entries."
::= { dIpExtGenArpMgmt 3 }
-- -----------------------------------------------------------------------------
dIpExtGratuitousArpMgmt OBJECT IDENTIFIER ::={ dIpExtMIBObjects 2 }
dIpExtGratuitousARPSendRequestEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable transmission of gratuitous
ARP request.
The device will send out the packet when an IP interface becomes
link up or when the IP address of an interface is configured or
modified."
DEFVAL { false }
::={ dIpExtGratuitousArpMgmt 1}
dIpExtGratuitousARPLearningEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable learning of an ARP entry in
the ARP cache based on the received gratuitous ARP packet. If the
device receives a gratuitous ARP request/reply packet and the
sender's IP address is in its ARP table, it should update the
ARP entry.
"
DEFVAL { true }
::={ dIpExtGratuitousArpMgmt 2}
dIpExtGratuitousARPDadReplyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable sending of gratuitous ARP request
while duplicate IP address is detected."
DEFVAL { false }
::={ dIpExtGratuitousArpMgmt 3}
dIpExtGratuitousARPTrapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the state of the gratuitous ARP trap. The switch can
trap the IP conflict events to inform the administrator.
By default, the trap is disabled."
DEFVAL { false }
::={dIpExtGratuitousArpMgmt 4}
dIpExtGratuitousARPNotifyInfo OBJECT IDENTIFIER ::= {dIpExtGratuitousArpMgmt 5 }
dIpExtGratuitousARPIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A duplicate IP address with the switch already exists."
::={dIpExtGratuitousARPNotifyInfo 1}
dIpExtGratuitousARPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object is the MAC address of the device which has
the duplicate IP address."
::={dIpExtGratuitousARPNotifyInfo 2}
dIpExtGratuitousARPPortNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object is the the port number."
::={dIpExtGratuitousARPNotifyInfo 3}
-- -----------------------------------------------------------------------------
dIpExtIpv6NeighborDiscoverMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 3}
dIpExtClearAllIpv6Neighbors OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear dynamic neighbor cache entries
associated with all interfaces when set to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
DEFVAL { noOp }
::= { dIpExtIpv6NeighborDiscoverMgmt 1 }
dIpExtClearIpv6NeighborsByIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the interface on which
the dynamic neighbor cache entries will be cleared.
When read, a value of 0 is returned."
::= { dIpExtIpv6NeighborDiscoverMgmt 2 }
dIpExtTotalIpv6Neighbors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of dynamic neighbor cache
entries."
::= { dIpExtIpv6NeighborDiscoverMgmt 3 }
-- -----------------------------------------------------------------------------
dIpExtInterfaceMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 4}
dIpExtIpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtIpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table provides the mechanism to create or delete layer 3 interfaces.
It is expected that user first creates a row in this table, followed by
configuring the row in dIpExtIfCfgTable via the corresponding ifIndex.
"
::= { dIpExtInterfaceMgmt 1 }
dIpExtIpIfEntry OBJECT-TYPE
SYNTAX DIpExtIpIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance contains the information of the layer 3 interface.
Creating/deleting entries in this table causes corresponding entries
be created/deleted in ifTable/ifXTable."
INDEX {
dIpExtIpIfType,
dIpExtIpIfNumber
}
::= { dIpExtIpIfTable 1 }
DIpExtIpIfEntry ::= SEQUENCE {
dIpExtIpIfType INTEGER,
dIpExtIpIfNumber Unsigned32,
dIpExtIpIfIndex InterfaceIndex,
dIpExtIpIfRowStatus RowStatus
}
dIpExtIpIfType OBJECT-TYPE
SYNTAX INTEGER {
loopback(1),
vlan(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the interface.
'loopback' - The software only interface which always stays in up status.
'vlan' - VLAN interface.
"
::= { dIpExtIpIfEntry 1 }
dIpExtIpIfNumber OBJECT-TYPE
SYNTAX Unsigned32 (0 .. 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the interface ID within the type.
"
::= { dIpExtIpIfEntry 2 }
dIpExtIpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the interface is determined by the agent.
"
::= { dIpExtIpIfEntry 3 }
dIpExtIpIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { dIpExtIpIfEntry 4 }
-- -----------------------------------------------------------------------------
dIpExtIfCfgTableNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of entries present in the dIpExtIfCfgTable."
::= { dIpExtInterfaceMgmt 2 }
dIpExtIfCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains extended per-interface information."
::= { dIpExtInterfaceMgmt 3 }
dIpExtIfCfgEntry OBJECT-TYPE
SYNTAX DIpExtIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table is created as a side effect of row addition
in the dIpExtIpIfTable.
"
INDEX { dIpExtIfCfgIfIndex }
::= { dIpExtIfCfgTable 1 }
DIpExtIfCfgEntry ::= SEQUENCE {
dIpExtIfCfgIfIndex InterfaceIndex,
dIpExtIfCfgDhcpEnabled TruthValue,
dIpExtIfCfgArpTimeout Unsigned32,
dIpExtIfCfgProxyArpEnabled TruthValue,
dIpExtIfCfgLocalProxyArpEnabled TruthValue,
dIpExtIfCfgDirectedBcastEnabled TruthValue,
dIpExtIfCfgDirectedBcastAcl DisplayString,
dIpExtIfCfgGratuitousARPSendInterval Unsigned32,
dIpExtIfCfgIpMtu Unsigned32,
dIpExtIfCfgDADTransmits Unsigned32
}
dIpExtIfCfgIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
"
::= { dIpExtIfCfgEntry 1 }
dIpExtIfCfgDhcpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates whether acquire an IP address configuration
on the interface from the DHCP protocol."
DEFVAL { false }
::= { dIpExtIfCfgEntry 2 }
dIpExtIfCfgArpTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..65535)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the ARP aging time in unit of minute for
dynamic ARP entries on the corresponding interface.
Setting this variable to 0 the ARP entries will not be aged out."
DEFVAL { 240 }
::= { dIpExtIfCfgEntry 3 }
dIpExtIfCfgProxyArpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the state of proxy ARP on the corresponding
interface."
DEFVAL { false }
::= { dIpExtIfCfgEntry 4 }
dIpExtIfCfgLocalProxyArpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the state of local proxy ARP on the
corresponding interface."
DEFVAL { false }
::= { dIpExtIfCfgEntry 5 }
dIpExtIfCfgDirectedBcastEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the state of the conversion of IP directed
broadcasts on the corresponding interface."
DEFVAL { false }
::= { dIpExtIfCfgEntry 6 }
dIpExtIfCfgDirectedBcastAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the name of a standard IP access list."
::= { dIpExtIfCfgEntry 7 }
dIpExtIfCfgGratuitousARPSendInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval of regularly sending the
gratuitous ARP request message in unit of second on the
corresponding interface.
A value of zero indicates the gratuitous ARP will not be regularly
sent."
DEFVAL { 0 }
::= { dIpExtIfCfgEntry 8 }
dIpExtIfCfgIpMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MTU is the largest size of the IP datagram which may be transferred
using a specific data link connection. The MTU value is a design parameter
of a LAN and is a mutually agreed value (i.e. both ends of a link agree to
use the same specific value) for most WAN links.
The MTU range is based on the chip of the current device."
DEFVAL { 1500 }
::= { dIpExtIfCfgEntry 9 }
dIpExtIfCfgDADTransmits OBJECT-TYPE
SYNTAX Unsigned32 ( 0..255 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the number of Neighbor Solicitations to send
during Duplicate Address Detection (DAD).
A value of zero indicates DAD is disabled.
"
DEFVAL { 1 }
::= { dIpExtIfCfgEntry 10 }
-- -----------------------------------------------------------------------------
dIpExtIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addressing information relevant to
this entity's IP addresses. This is the enhancement of
the ipAddressTable in IP-MIB. Creating/deleting entries in this table
causes corresponding entries be created/deleted in ipAddressTable."
::= { dIpExtInterfaceMgmt 4 }
dIpExtIpAddressEntry OBJECT-TYPE
SYNTAX DIpExtIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The addressing information for one of this entity's IP addresses.
"
INDEX {
dIpExtIpAddressType,
dIpExtIpAddress,
dIpExtIpAddressIfIndex
}
::= { dIpExtIpAddressTable 1 }
DIpExtIpAddressEntry ::= SEQUENCE {
dIpExtIpAddressType InetAddressType,
dIpExtIpAddress InetAddress,
dIpExtIpAddressIfIndex InterfaceIndex,
dIpExtIpAddressPrefixLength InetAddressPrefixLength,
dIpExtIpAddressCategory INTEGER,
dIpExtIpAddressRowStatus RowStatus
}
dIpExtIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address type of entry."
::= { dIpExtIpAddressEntry 1 }
dIpExtIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing
information pertains."
::= { dIpExtIpAddressEntry 2 }
dIpExtIpAddressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex value which uniquely identifies the interface to which
this entry is applicable.
"
::= { dIpExtIpAddressEntry 3 }
dIpExtIpAddressPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the prefix associated with the IP address of this
entry.
"
::= { dIpExtIpAddressEntry 4 }
dIpExtIpAddressCategory OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
linkLocal(3),
eui64(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the IP address category of this entry.
The 'primary' and 'secondary' are valid for IPv4 address.
Although multiple IPv4 addresses can be created for an interface,
at most one of these addresses is the primary IPv4 address, and the
rest are secondary IPv4 address.
'linkLocal' and 'eui64' are valid for IPv6 address.
'linkLocal' - The IPv6 address is a link local address.
'eui64' - The IPv6 address is formed by EUI-64 interface ID.
The corresponding prefix length must be smaller than 64.
"
::= { dIpExtIpAddressEntry 5 }
dIpExtIpAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation and deletion of rows
in this table.
"
::= { dIpExtIpAddressEntry 6 }
-- -----------------------------------------------------------------------------
dIpExtIpAddrBaseGenPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtAddrBaseGenPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the configuration of IPv6 address based on a
general prefix.
"
::= { dIpExtInterfaceMgmt 5 }
dIpExtIpAddrBaseGenPrefixEntry OBJECT-TYPE
SYNTAX DIpExtAddrBaseGenPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the association of general prefix for
configuring IPv6 address on an interface.
"
INDEX {
dIpExtIpAddrBasePrefixIfIndex,
dIpExtIpAddrBasePrefixName
}
::= { dIpExtIpAddrBaseGenPrefixTable 1 }
DIpExtAddrBaseGenPrefixEntry ::= SEQUENCE {
dIpExtIpAddrBasePrefixIfIndex InterfaceIndex,
dIpExtIpAddrBasePrefixName DisplayString,
dIpExtIpAddrBasePrefixSubBits InetAddressIPv6,
dIpExtIpAddrBasePrefixLength InetAddressPrefixLength,
dIpExtIpAddrBasePrefixRowStatus RowStatus
}
dIpExtIpAddrBasePrefixIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex value which uniquely identifies the interface to which
this entry is applicable.
"
::= { dIpExtIpAddrBaseGenPrefixEntry 1 }
dIpExtIpAddrBasePrefixName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the general prefix name which will be used to configure the IPv6
address on the interface.
"
::= { dIpExtIpAddrBaseGenPrefixEntry 2 }
dIpExtIpAddrBasePrefixSubBits OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the sub-prefix part and host part of the IPv6 address.
"
::= { dIpExtIpAddrBaseGenPrefixEntry 3 }
dIpExtIpAddrBasePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the prefix associated with the IP address of this
entry.
"
::= { dIpExtIpAddrBaseGenPrefixEntry 4 }
dIpExtIpAddrBasePrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation and deletion of rows
in this table.
"
::= { dIpExtIpAddrBaseGenPrefixEntry 5 }
-- -----------------------------------------------------------------------------
dIpExtPrefixMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 5}
dIpExtIpv6GneralPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtIpv6GneralPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the creation and removal of IPv6 general
prefixes.
"
::= { dIpExtPrefixMgmt 1 }
dIpExtIpv6GneralPrefixEntry OBJECT-TYPE
SYNTAX DIpExtIpv6GneralPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consists of information of an IPv6 general prefix."
INDEX { dIpExtGneralPrefixName }
::= { dIpExtIpv6GneralPrefixTable 1 }
DIpExtIpv6GneralPrefixEntry ::= SEQUENCE {
dIpExtGneralPrefixName DisplayString,
dIpExtGneralPrefixType INTEGER,
dIpExtGneralPrefix InetAddressIPv6,
dIpExtGneralPrefixLength InetAddressPrefixLength,
dIpExtGeneralPrefix6to4IfIndex InterfaceIndex,
dIpExtGeneralPrefixRowStatus RowStatus
}
dIpExtGneralPrefixName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex value which uniquely identifies the
interface to which this entry is applicable.
"
::= { dIpExtIpv6GneralPrefixEntry 1 }
dIpExtGneralPrefixType OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
ipv6ToIpv4(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of the prefix configuration.
'normal' - This general prefix is configured by dIpExtGneralPrefix
and dIpExtGneralPrefixLength.
'ipv6ToIpv4' - The general prefix is configured by the interface
(dIpExtGeneralPrefix6to4IfIndex) whose IPv4
address will be used to form a general prefix used for
6to4 tunnel.
"
::= { dIpExtIpv6GneralPrefixEntry 2 }
dIpExtGneralPrefix OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the prefix of the entry.
This object is meaningless when dIpExtGneralPrefixType is not 'normal'.
"
::= { dIpExtIpv6GneralPrefixEntry 3 }
dIpExtGneralPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the prefix associated with the general prefix of this
entry.
This object is meaningless when dIpExtGneralPrefixType is not 'normal'.
"
::= { dIpExtIpv6GneralPrefixEntry 4 }
dIpExtGeneralPrefix6to4IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates ifIndex of the interface whose IPv4 address
will be used to form a general prefix used for 6to4 tunnel.
This object is meaningless when dIpExtGneralPrefixType is not 'ipv6ToIpv4'.
"
::= { dIpExtIpv6GneralPrefixEntry 5 }
dIpExtGeneralPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of IPv6
general prefixes.
"
::= { dIpExtIpv6GneralPrefixEntry 6 }
-- -----------------------------------------------------------------------------
dIpExtIpv6PrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtIpv6PrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the creation and removal of IPv6
prefixes to be placed in Prefix Information
options in Router Advertisement messages sent
from the interface.
This is the enhancement of the ipAddressPrefixTable in IP-MIB.
"
::= { dIpExtPrefixMgmt 2 }
dIpExtIpv6PrefixEntry OBJECT-TYPE
SYNTAX DIpExtIpv6PrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 interface prefix entry."
INDEX {
dIpExtIpv6PrefixIfIndex,
dIpExtIpv6Prefix,
dIpExtIpv6PrefixLength
}
::= { dIpExtIpv6PrefixTable 1 }
DIpExtIpv6PrefixEntry ::= SEQUENCE {
dIpExtIpv6PrefixIfIndex InterfaceIndex,
dIpExtIpv6Prefix InetAddressIPv6,
dIpExtIpv6PrefixLength InetAddressPrefixLength,
dIpExtIpv6PrefixValidLifetime Unsigned32,
dIpExtIpv6PrefixPreferLifetime Unsigned32,
dIpExtIpv6PrefixOnLinkFlag TruthValue,
dIpExtIpv6PrefixAutonomousFlag TruthValue,
dIpExtIpv6PrefixRowStatus RowStatus
}
dIpExtIpv6PrefixIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex value which uniquely identifies the
interface to which this entry is applicable.
"
::= { dIpExtIpv6PrefixEntry 1 }
dIpExtIpv6Prefix OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix of the entry."
::= { dIpExtIpv6PrefixEntry 2 }
dIpExtIpv6PrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of the entry."
::= { dIpExtIpv6PrefixEntry 3 }
dIpExtIpv6PrefixValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the valid life time in seconds of the entry.
A value of 4,294,967,295 represents infinity.
"
DEFVAL { 2592000 }
::= { dIpExtIpv6PrefixEntry 4 }
dIpExtIpv6PrefixPreferLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the preferred life time in seconds of the entry.
A value of 4,294,967,295 represents infinity.
"
DEFVAL { 604800 }
::= { dIpExtIpv6PrefixEntry 5 }
dIpExtIpv6PrefixOnLinkFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if this prefix can be
used for on-link determination; otherwise, the value is
'false(2)'.
The default for IPv4 prefixes is 'true(1)'."
DEFVAL { false }
::= { dIpExtIpv6PrefixEntry 6 }
dIpExtIpv6PrefixAutonomousFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous address configuration flag. When true(1),
indicates that this prefix can be used for autonomous
address configuration (i.e., can be used to form a local
interface address). If false(2), it is not used to auto-
configure a local interface address.
The default for IPv4 prefixes is 'false(2)'."
DEFVAL { true }
::= { dIpExtIpv6PrefixEntry 7 }
dIpExtIpv6PrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control the addition and removal of IPv6
interface prefixes for RA messages."
::= { dIpExtIpv6PrefixEntry 8 }
-- -----------------------------------------------------------------------------
dIpExtDhcpClientMgmt OBJECT IDENTIFIER ::={ dIpExtMIBObjects 6 }
dIpExtDhcpClientIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtDhcpClientIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains a list of DHCP client configuration of interfaces."
::= { dIpExtDhcpClientMgmt 1 }
dIpExtDhcpClientIfEntry OBJECT-TYPE
SYNTAX DIpExtDhcpClientIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created to configure DHCP client per-interface
settings to different value from default value. When an entry is
deleted, all the settings are reverted to default value."
INDEX { dIpExtDhcpClientIfIndex }
::= { dIpExtDhcpClientIfTable 1 }
DIpExtDhcpClientIfEntry ::= SEQUENCE {
dIpExtDhcpClientIfIndex InterfaceIndex,
dIpExtDhcpClientIfClassIdType INTEGER,
dIpExtDhcpClientIfClassIdValue DisplayString,
dIpExtDhcpClientIfClientIdIfIdx InterfaceIndex,
dIpExtDhcpClientIfLeaseDay Integer32,
dIpExtDhcpClientIfLeaseHour Unsigned32,
dIpExtDhcpClientIfLeaseMinute Unsigned32,
dIpExtDhcpClientIfHostName DisplayString
}
dIpExtDhcpClientIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces."
::= { dIpExtDhcpClientIfEntry 1 }
dIpExtDhcpClientIfClassIdType OBJECT-TYPE
SYNTAX INTEGER {
ascii(1),
hex(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the type of class id which is defined by
dIpExtDhcpClientIfClassIdValue.
The value means :
ascii(1)- The dIpExtDhcpClientIfClassIdValue is ascii string.
hex(2) - The dIpExtDhcpClientIfClassIdValue is a string of HEX
number.
"
::= { dIpExtDhcpClientIfEntry 2 }
dIpExtDhcpClientIfClassIdValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the value of vendor class identifier
(option 60) to be sent with the DHCP DISCOVER message.
An dIpExtDhcpClientIfClassIdValue value is always interpreted
within the context of an dIpExtDhcpClientIfClassIdType value.
If dIpExtDhcpClientIfClassIdType is 'hex', this object is a HEX
string value, which is restricted to hexadecimal character set."
::= { dIpExtDhcpClientIfEntry 3 }
dIpExtDhcpClientIfClientIdIfIdx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates ifIndex of the VLAN interface whose
hexadecimal MAC address will be used as the client ID to be
sent with the DISCOVER message.
"
::= { dIpExtDhcpClientIfEntry 4 }
dIpExtDhcpClientIfHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the host name. The host name must start with
a letter, end with a letter or digit, and only with interior
characters letters, digits, and hyphens.
"
::= { dIpExtDhcpClientIfEntry 5 }
dIpExtDhcpClientIfLeaseDay OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the number of days for the duration of
preferred lease time. Value of -1 indicates that preferred lease
time is unspecified.
This value is checked when an IP address is acquired from
a DHCP server. "
DEFVAL { -1 }
::= { dIpExtDhcpClientIfEntry 6 }
dIpExtDhcpClientIfLeaseHour OBJECT-TYPE
SYNTAX Unsigned32 (0..23)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the number of hours for the duration of preferred
lease time."
DEFVAL { 0 }
::= { dIpExtDhcpClientIfEntry 7 }
dIpExtDhcpClientIfLeaseMinute OBJECT-TYPE
SYNTAX Unsigned32 (0..59)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the number of minutes for the duration of preferred
lease time."
DEFVAL { 0 }
::= { dIpExtDhcpClientIfEntry 8 }
dIpExtDhcpClientAutoconfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of automatically getting the configuration information
from a TFTP server connected to the device."
::= { dIpExtDhcpClientMgmt 2 }
-- -----------------------------------------------------------------------------
dIpExtUdpForwardMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 7}
dIpExtUdpFwdPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtUdpFwdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of UDP ports to forward UDP packets.
"
::= { dIpExtUdpForwardMgmt 1 }
dIpExtUdpFwdPortEntry OBJECT-TYPE
SYNTAX DIpExtUdpFwdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created/deleted to enable/disable forwarding of a
specific UDP service type of packets."
INDEX { dIpExtUdpFwdPortNumber }
::= { dIpExtUdpFwdPortTable 1 }
DIpExtUdpFwdPortEntry ::= SEQUENCE {
dIpExtUdpFwdPortNumber InetPortNumber,
dIpExtUdpFwdPortRowStatus RowStatus
}
dIpExtUdpFwdPortNumber OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The UDP port number of the entry.
"
::= { dIpExtUdpFwdPortEntry 1 }
dIpExtUdpFwdPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { dIpExtUdpFwdPortEntry 2 }
-- -----------------------------------------------------------------------------
dIpExtUdpHelperAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpExtUdpHelperAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of target addresses for forwarding of
UDP broadcast packets.
"
::= { dIpExtUdpForwardMgmt 2 }
dIpExtUdpHelperAddrEntry OBJECT-TYPE
SYNTAX DIpExtUdpHelperAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An target IP address for forwarding of the UDP broadcast packet
on an interface.
"
INDEX {
dIpExtUdpHelperIfIndex,
dIpExtUdpHelperAddrType,
dIpExtUdpHelperAddr
}
::= { dIpExtUdpHelperAddrTable 1 }
DIpExtUdpHelperAddrEntry ::= SEQUENCE {
dIpExtUdpHelperIfIndex InterfaceIndex,
dIpExtUdpHelperAddrType InetAddressType,
dIpExtUdpHelperAddr InetAddress,
dIpExtUdpHelperAddrRowStatus RowStatus
}
dIpExtUdpHelperIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface on which the entry is configured.
Only VLAN interfaces are valid interfaces."
::= { dIpExtUdpHelperAddrEntry 1 }
dIpExtUdpHelperAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of UDP helper address."
::= { dIpExtUdpHelperAddrEntry 2 }
dIpExtUdpHelperAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address of the server.
"
::= { dIpExtUdpHelperAddrEntry 3 }
dIpExtUdpHelperAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { dIpExtUdpHelperAddrEntry 4 }
-- ***************************************************************************
-- Conformance
-- ***************************************************************************
dIpExtCompliances OBJECT IDENTIFIER ::= { dIpExtMIBConformance 1 }
dIpExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-IP-EXT-MIB."
MODULE -- this module
MANDATORY-GROUPS {
dIpExtBasicGroup
}
GROUP dIpExtBasicIpv6OnlyGroup
DESCRIPTION
"This group is required only if IPv6 is implemented by the agent."
GROUP dIpExtGeneralPrefixGroup
DESCRIPTION
"This group is required only if general prefix is implemented by
the agent."
OBJECT dIpExtGeneralPrefix6to4IfIndex
MIN-ACCESS read-only
DESCRIPTION
"Create/Write access is required only if the agent supports forming
a general prefix for 6to4 tunnel."
GROUP dIpExtGratuitousArpGroup
DESCRIPTION
"This group is required only if Gratuitous ARP feature is
implemented by the agent."
GROUP dIpExtProxyArpGroup
DESCRIPTION
"This group is required only if Proxy ARP feature is
implemented by the agent."
OBJECT dIpExtIfCfgLocalProxyArpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Create/Write access is required only if the agent supports local
Proxy ARP."
GROUP dIpExtDirectedBroadcastGroup
DESCRIPTION
"This group is required only if IP directed broadcast is
implemented by the agent."
GROUP dIpExtDhcpClientGroup
DESCRIPTION
"This group is required only if IP DHCP client is
implemented by the agent."
GROUP dIpExtUdpForwardGroup
DESCRIPTION
"This group is required only if UDP forwarder is
implemented by the agent."
::= { dIpExtCompliances 1 }
dIpExtGroups OBJECT IDENTIFIER ::= { dIpExtMIBConformance 2 }
dIpExtBasicGroup OBJECT-GROUP
OBJECTS {
dIpExtClearArpCacheAll,
dIpExtClearArpCacheByIf,
dIpExtTotalArpEntries,
dIpExtIpIfIndex,
dIpExtIpIfRowStatus,
dIpExtIfCfgTableNumber,
dIpExtIfCfgDhcpEnabled,
dIpExtIfCfgArpTimeout,
dIpExtIfCfgIpMtu,
dIpExtIpAddressPrefixLength,
dIpExtIpAddressCategory,
dIpExtIpAddressRowStatus
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to
IP/ARP settings which are not covered by standard IP-MIB."
::= { dIpExtGroups 1 }
dIpExtBasicIpv6OnlyGroup OBJECT-GROUP
OBJECTS {
dIpExtClearAllIpv6Neighbors,
dIpExtClearIpv6NeighborsByIf,
dIpExtTotalIpv6Neighbors,
dIpExtIfCfgDADTransmits
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to
fundamental IPv6 feature."
::= { dIpExtGroups 2 }
dIpExtGeneralPrefixGroup OBJECT-GROUP
OBJECTS {
dIpExtIpAddrBasePrefixSubBits,
dIpExtIpAddrBasePrefixLength,
dIpExtIpAddrBasePrefixRowStatus,
dIpExtGneralPrefixType,
dIpExtGneralPrefix,
dIpExtGneralPrefixLength,
dIpExtGeneralPrefix6to4IfIndex,
dIpExtGeneralPrefixRowStatus
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to
general prefix configuration."
::= { dIpExtGroups 3 }
dIpExtRaPrefixGroup OBJECT-GROUP
OBJECTS {
dIpExtIpv6Prefix,
dIpExtIpv6PrefixLength,
dIpExtIpv6PrefixValidLifetime,
dIpExtIpv6PrefixPreferLifetime,
dIpExtIpv6PrefixOnLinkFlag,
dIpExtIpv6PrefixAutonomousFlag,
dIpExtIpv6PrefixRowStatus
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to
the configuration of IPv6 prefix which are advertised in RA."
::= { dIpExtGroups 4 }
dIpExtGratuitousArpGroup OBJECT-GROUP
OBJECTS {
dIpExtIfCfgGratuitousARPSendInterval,
dIpExtGratuitousARPSendRequestEnabled,
dIpExtGratuitousARPLearningEnabled
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to
Gratuitous ARP feature."
::= { dIpExtGroups 5 }
dIpExtProxyArpGroup OBJECT-GROUP
OBJECTS {
dIpExtIfCfgProxyArpEnabled,
dIpExtIfCfgLocalProxyArpEnabled
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to Proxy
ARP."
::= { dIpExtGroups 6 }
dIpExtDirectedBroadcastGroup OBJECT-GROUP
OBJECTS {
dIpExtIfCfgDirectedBcastEnabled,
dIpExtIfCfgDirectedBcastAcl
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to IP
directed broadcasts feature."
::= { dIpExtGroups 7 }
dIpExtDhcpClientGroup OBJECT-GROUP
OBJECTS {
dIpExtDhcpClientIfClassIdType,
dIpExtDhcpClientIfClassIdValue,
dIpExtDhcpClientIfClientIdIfIdx,
dIpExtDhcpClientIfHostName,
dIpExtDhcpClientIfLeaseDay,
dIpExtDhcpClientIfLeaseHour,
dIpExtDhcpClientIfLeaseMinute }
STATUS current
DESCRIPTION
"This group contains the collection of objects related to DHCP
client."
::= { dIpExtGroups 8 }
dIpExtUdpForwardGroup OBJECT-GROUP
OBJECTS {
dIpExtUdpFwdPortRowStatus,
dIpExtUdpHelperAddrRowStatus
}
STATUS current
DESCRIPTION
"This group contains the collection of objects related to UDP
forwarding feature."
::= { dIpExtGroups 9 }
END
Reference in New Issue Copy Permalink