mibs/MIBS/dlink/DLINKSW-IP-SOURCE-GUARD-MIB

465 lines
17 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-IP-SOURCE-GUARD-MIB.mib : IP Source Guard MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-IP-SOURCE-GUARD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress,
RowStatus
FROM SNMPv2-TC
ifIndex,
InterfaceIndex
FROM IF-MIB
InetAddressIPv4
FROM INET-ADDRESS-MIB
VlanId
FROM Q-BRIDGE-MIB
Dlink2kVlanList
FROM DLINKSW-TC-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwIpSourceGuardMIB MODULE-IDENTITY
LAST-UPDATED "201307180000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"The MIB module is for configuration of IP Source Guard feature."
REVISION "201307180000Z"
DESCRIPTION
"Initial revision of this MIB module."
::= { dlinkIndustrialCommon 132 }
dIpSourceGuardMIBNotifs OBJECT IDENTIFIER ::= { dlinkSwIpSourceGuardMIB 0 }
dIpSourceGuardMIBObjects OBJECT IDENTIFIER ::= { dlinkSwIpSourceGuardMIB 1 }
dIpSourceGuardMIBConformance OBJECT IDENTIFIER ::= { dlinkSwIpSourceGuardMIB 2 }
-- -----------------------------------------------------------------------------
dIpsgBindings OBJECT IDENTIFIER ::= { dIpSourceGuardMIBObjects 1 }
dIpsgSrcGuard OBJECT IDENTIFIER ::= { dIpSourceGuardMIBObjects 2 }
-- -----------------------------------------------------------------------------
dIpsgStaticBindingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DigStaticBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table provides the manual bindings information.
e.g.
VLAN MAC Address IP Address Interface
---- ----------------- ---------- ---------
2000 00.01.02.03.04.05 172.18.1.1 8
3000 00.05.06.07.08.09 10.1.1.1 3
4094 00.10.20.30.40.55 1.1.1.1 5
4094 00.10.20.30.40.55 1.1.1.1 6
4094 00.10.20.30.40.55 1.1.1.1 8
"
::= { dIpsgBindings 1 }
dIpsgStaticBindingsEntry OBJECT-TYPE
SYNTAX DigStaticBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defines a manual binding.
"
INDEX {
dIpsgStaticBindingsVlan,
dIpsgStaticBindingsMacAddress,
dIpsgStaticBindingsIpAddress,
dIpsgStaticBindingsInterface
}
::= { dIpsgStaticBindingsTable 1 }
DigStaticBindingsEntry ::= SEQUENCE {
dIpsgStaticBindingsVlan VlanId,
dIpsgStaticBindingsMacAddress MacAddress,
dIpsgStaticBindingsIpAddress InetAddressIPv4,
dIpsgStaticBindingsInterface InterfaceIndex,
dIpsgStaticBindingsRowStatus RowStatus
}
dIpsgStaticBindingsVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VLAN to which a host belongs."
::= { dIpsgStaticBindingsEntry 1 }
dIpsgStaticBindingsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the MAC address of a host."
::= { dIpsgStaticBindingsEntry 2 }
dIpsgStaticBindingsIpAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the allocated IP address of host."
::= { dIpsgStaticBindingsEntry 3 }
dIpsgStaticBindingsInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the ifIndex value of the interface
where a host connects to."
::= { dIpsgStaticBindingsEntry 4 }
dIpsgStaticBindingsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage the creation and deletion
of rows in this table.
"
::= { dIpsgStaticBindingsEntry 99 }
-- -----------------------------------------------------------------------------
dIpsgIfSrcGuardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DigIfSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table provides the mechanism to enable or disable
IP Source Guard at every interface capable of
this feature.
When DHCP Snooping is enabled at an interface, a list of
IP addresses is obtained through DHCP Snooping for this
particular interface. If IP Source Guard is enabled, only
traffic from these IP addresses is allowed to pass through
the interface."
::= { dIpsgSrcGuard 1 }
dIpsgIfSrcGuardConfigEntry OBJECT-TYPE
SYNTAX DigIfSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance contains the configuration to enable
or disable IP Source Guard as well as the configuration
of the filter type at each interface capable
of IP Source Guard feature."
INDEX { ifIndex }
::= { dIpsgIfSrcGuardConfigTable 1 }
DigIfSrcGuardConfigEntry ::= SEQUENCE {
dIpsgIfSrcGuardFilterType INTEGER
}
dIpsgIfSrcGuardFilterType OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
ip(2),
ipMac(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the traffic filter type applied
at this interface.
'disable' - indicates that IP Source Guard feature is disabled.
'ip' - the validation is based on source IP address and VLAN only.
'ipMac' - the validation is based on the source MAC address, VLAN and IP address.
"
::= { dIpsgIfSrcGuardConfigEntry 1 }
-- -----------------------------------------------------------------------------
dIpsgIfSrcGuardAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DigIfSrcGuardAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table provides the information on IP addresses used
for IP Source Guard purpose at every interface capable of this
feature."
::= { dIpsgSrcGuard 2 }
dIpsgIfSrcGuardAddrEntry OBJECT-TYPE
SYNTAX DigIfSrcGuardAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defines a binding information that is used to guard the
IP traffic.
The binding entry may be either manually configured or
automatically learned via DHCP snooping.
"
INDEX {
ifIndex,
dIpsgIfSrcGuardIndex
}
::= { dIpsgIfSrcGuardAddrTable 1 }
DigIfSrcGuardAddrEntry ::= SEQUENCE {
dIpsgIfSrcGuardIndex Unsigned32,
dIpsgIfSrcGuardFilterMode INTEGER,
dIpsgIfSrcGuardIpAddress InetAddressIPv4,
dIpsgIfSrcGuardIpFilterAction INTEGER,
dIpsgIfSrcGuardMacAddress MacAddress,
dIpsgIfSrcGuardMacFilterAction INTEGER,
dIpsgIfSrcGuardVlansFirst2K Dlink2kVlanList,
dIpsgIfSrcGuardVlansSecond2K Dlink2kVlanList
}
dIpsgIfSrcGuardIndex OBJECT-TYPE
SYNTAX Unsigned32 ( 1 ..65535 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to index the dIpsgIfSrcGuardAddrTable.
This index is for SNMP purposes only, and has no intrinsic meaning."
::= { dIpsgIfSrcGuardAddrEntry 1 }
dIpsgIfSrcGuardFilterMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactiveTrustPort(2),
inactiveNoSnoopingVlan(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Source Guard filter mode at
this interface.
active(1) indicates that the Source Guard feature is
active at this interface.
inactiveTrustPort(2) indicates that the Source Guard
feature is inactive because this interface is a DHCP
Snooping trust interface and all IP traffic is permitted.
In this case, dIpsgIfSrcGuardIpFilterAction is 'permitAllIpAdress'.
inactiveNoSnoopingVlan(3) indicates that the Source
Guard feature is inactive because this interface
does not have a VLAN which has DHCP Snooping enabled and
no IP source verify entry is active. In this case, all IP traffic
is denied and dIpsgIfSrcGuardIpFilterAction is 'denyAllIpAddress'.
If this object is not 'active', the entry is a special entry:
traffic from any VLANs on the interface has the same behavior
indicated by dIpsgIfSrcGuardIpFilterAction and both
dIpsgIfSrcGuardVlansFirst2K and dIpsgIfSrcGuardVlansSecond2K
are empty.
"
::= { dIpsgIfSrcGuardAddrEntry 2 }
dIpsgIfSrcGuardIpAddress OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IP address of the entry.
A special value of '0.0.0.0' indicates this object is meaningless.
"
::= { dIpsgIfSrcGuardAddrEntry 3 }
dIpsgIfSrcGuardIpFilterAction OBJECT-TYPE
SYNTAX INTEGER {
permitIpAddress(1),
permitAllIpAdress(2),
denyAllIpAddress(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IP Source Guard action
applied at this interface with respect to IP traffic.
permitIpAddress(1) - indicates that matching IP traffic will be allowed
to go through. What is matching traffic depends on the value of
dIpsgIfSrcGuardMacFilterAction.
permitAllIpAdress(2) indicates that all IP traffic coming to this
interface will be allowed. In this case, dIpsgIfSrcGuardIpAddress
is 0.0.0.0.
denyAllIpAdress(3) indicates that all IP traffic coming to this
interface will be dropped. In this case, dIpsgIfSrcGuardIpAddress
is 0.0.0.0.
When this object is not 'permitIpAddress', the value of
dIpsgIfSrcGuardMacFilterAction is meaningless.
"
::= { dIpsgIfSrcGuardAddrEntry 4 }
dIpsgIfSrcGuardMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address of the entry.
A special value of '000000000000'H indicates this object is
meaningless.
"
::= { dIpsgIfSrcGuardAddrEntry 5 }
dIpsgIfSrcGuardMacFilterAction OBJECT-TYPE
SYNTAX INTEGER {
allowMacAddress(1),
permitAllMacAddresses(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Source Guard action
applied when the traffic matching the entry:
allowMacAddress(1) - indicates that the IP traffic (compared
source IP and source MAC with dIpsgIfSrcGuardIpAddress and
dIpsgIfSrcGuardMacAddress respectively) will be allowed
to go through.
permitAllMacAddresses(2) - If dIpsgIfSrcGuardIpFilterAction is
'permitIpAddress', this value indicates that all the IP matching
traffic (compared source IP with dIpsgIfSrcGuardIpAddress only)
will be allowed to go through.
When dIpsgIfSrcGuardIpFilterAction is 'permitAllIpAdress' or
'denyAllIpAdress', this object is meaningless.
When dIpsgIfSrcGuardMacFilterAction is 'permitAllMacAddresses',
dIpsgIfSrcGuardMacAddress is meaningless and
'000000000000'H is used to indicate it.
"
::= { dIpsgIfSrcGuardAddrEntry 6 }
dIpsgIfSrcGuardVlansFirst2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the VLANs the entry is applied to in a
string of octets containing one bit per VLAN for VLANs 1 to 2048.
If the bit is set to '1', then the IP Source Guard is enabled on
the VLAN.
"
::= { dIpsgIfSrcGuardAddrEntry 7 }
dIpsgIfSrcGuardVlansSecond2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the VLANs the entry is applied to in a
string of octets containing one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the IP Source Guard is enabled on
the VLAN.
"
::= { dIpsgIfSrcGuardAddrEntry 8 }
-- Conformance
dIpsgMIBCompliances OBJECT IDENTIFIER ::= { dIpSourceGuardMIBConformance 1 }
dIpsgMIBGroups OBJECT IDENTIFIER ::= { dIpSourceGuardMIBConformance 2 }
dIpsgMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the DLINKSW-IP-SOURCE-GUARD-MIB."
MODULE -- this module
MANDATORY-GROUPS {
dIpsgIfSrcGuardTrafficFilterGroup,
dIpsgVerifySrcInfoGroup
}
GROUP dIpsgStaticBindingsGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the DHCP bindings data statically configured by (local
or network) management."
GROUP dIpsgVerifySrcInfoExtGroup
DESCRIPTION
"This group is mandatory only for platforms which support
interface IP and MAC source guard feature."
::= { dIpsgMIBCompliances 1 }
-- Units of Conformance
dIpsgStaticBindingsGroup OBJECT-GROUP
OBJECTS {
dIpsgStaticBindingsRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects which are used to configure
as well as show information regarding the static binding data
for IP Source Guard."
::= { dIpsgMIBGroups 1 }
dIpsgVerifySrcInfoGroup OBJECT-GROUP
OBJECTS {
dIpsgIfSrcGuardIpAddress,
dIpsgIfSrcGuardIpFilterAction,
dIpsgIfSrcGuardFilterMode
}
STATUS current
DESCRIPTION
"A collection of objects which are used to show information
regarding interface IP source guard purpose."
::= { dIpsgMIBGroups 2 }
dIpsgVerifySrcInfoExtGroup OBJECT-GROUP
OBJECTS {
dIpsgIfSrcGuardMacAddress,
dIpsgIfSrcGuardMacFilterAction,
dIpsgIfSrcGuardVlansFirst2K,
dIpsgIfSrcGuardVlansSecond2K
}
STATUS current
DESCRIPTION
"A collection of objects which are used to indicate additional
information regarding the IP source guard feature."
::= { dIpsgMIBGroups 3 }
dIpsgIfSrcGuardTrafficFilterGroup OBJECT-GROUP
OBJECTS { dIpsgIfSrcGuardFilterType }
STATUS current
DESCRIPTION
"A collection of objects which are used to configure the
type of traffic to be filtered by IP source guard feature."
::= { dIpsgMIBGroups 4 }
END