mibs/MIBS/dlink/DLINKSW-LACP-EXT-MIB

208 lines
7.2 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-LACP-EXT-MIB.mib : D-Link Link Aggregation Control Extenstions MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-LACP-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY , OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
PortList
FROM Q-BRIDGE-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwLacpExtMIB MODULE-IDENTITY
LAST-UPDATED "201301180000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"The MIB module for managing D-Link LACP extensions which are
not covered by standard MIBs."
REVISION "201301180000Z"
DESCRIPTION
"Initial revision of this MIB module."
::= { dlinkIndustrialCommon 4 }
dLacpExtMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwLacpExtMIB 0 }
dLacpExtMIBObjects OBJECT IDENTIFIER ::= { dlinkSwLacpExtMIB 1 }
dLacpExtMIBConformance OBJECT IDENTIFIER ::= { dlinkSwLacpExtMIB 2 }
-----------------------------------------------
-- Lacp Objects
-----------------------------------------------
dLacpExtLoadBalanceAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
dstIp(1),
dstMac(2),
srcDstIp(3),
srcDstMac(4),
srcIp(5),
srcMac(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures load balance algorithm that the switch uses
to distribute packets across ports in the same channel.
dstIp(1) - Specify that the switch should examine the destination
IP address.
dstMac(2) - Specify that the switch should examine the destination
MAC address.
srcDstIp(3) - Specify that the switch should examine the source
and destination IP address.
srcDstMac(4) - Specify that the switch should examine the source and
destination MAC address.
srcIp(5) - Specify that the switch should examine the source IP
address.
srcMac(6) - Specify that the switch should examine the source MAC
address.
"
::= { dLacpExtMIBObjects 1 }
dLacpExtGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DLacpExtGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of channel group information."
::= { dLacpExtMIBObjects 2 }
dLacpExtGroupEntry OBJECT-TYPE
SYNTAX DLacpExtGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry presents a channel group information, which is not
covered by standard MIB(s)."
INDEX { dLacpExtGroupChannelNo }
::= { dLacpExtGroupTable 1 }
DLacpExtGroupEntry ::=
SEQUENCE {
dLacpExtGroupChannelNo Integer32,
dLacpExtGroupIfIndex InterfaceIndex,
dLacpExtGroupType INTEGER,
dLacpExtGroupMemberPorts PortList,
dLacpExtGroupActiveMemberPorts PortList,
dLacpExtGroupRowStatus RowStatus
}
dLacpExtGroupChannelNo OBJECT-TYPE
SYNTAX Integer32 (1 .. 255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the channel group ID. "
::= { dLacpExtGroupEntry 1 }
dLacpExtGroupIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the channel group."
::= { dLacpExtGroupEntry 2 }
dLacpExtGroupType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of channel group.
"
::= { dLacpExtGroupEntry 3 }
dLacpExtGroupMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ports which are grouped into this
channel group.
"
::= { dLacpExtGroupEntry 4 }
dLacpExtGroupActiveMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational bundled ports in this
channel group.
"
::= { dLacpExtGroupEntry 5 }
dLacpExtGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { dLacpExtGroupEntry 6 }
-----------------------------------------------
-- Lacp Conformance
-----------------------------------------------
dLacpExtCompliances OBJECT IDENTIFIER ::= { dLacpExtMIBConformance 1 }
dLacpExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-LACP-EXT-MIB."
MODULE
MANDATORY-GROUPS {
dLacpExtAlgGroup,
dLacpExtChannelGrpInfoGroup
}
::= { dLacpExtCompliances 1 }
dLacpExtGroups OBJECT IDENTIFIER ::= { dLacpExtMIBConformance 2 }
dLacpExtAlgGroup OBJECT-GROUP
OBJECTS {
dLacpExtLoadBalanceAlgorithm
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the algorithm of
link aggregation load sharing."
::= { dLacpExtGroups 1 }
dLacpExtChannelGrpInfoGroup OBJECT-GROUP
OBJECTS {
dLacpExtGroupIfIndex,
dLacpExtGroupType,
dLacpExtGroupMemberPorts,
dLacpExtGroupActiveMemberPorts,
dLacpExtGroupRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration of channel groups."
::= { dLacpExtGroups 2 }
END