260 lines
10 KiB
Plaintext
260 lines
10 KiB
Plaintext
|
-- *****************************************************************
|
||
|
|
-- DLINKSW-LED-MIB.mib : LED Mib
|
||
|
|
--
|
||
|
|
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
|
||
|
|
--
|
||
|
|
-- *****************************************************************
|
||
|
|
DLINKSW-LED-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
dlinkIndustrialCommon
|
||
|
|
FROM DLINK-ID-REC-MIB;
|
||
|
|
|
||
|
|
dlinkSwLedMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201309130000Z"
|
||
|
|
ORGANIZATION "D-Link Corp."
|
||
|
|
CONTACT-INFO
|
||
|
|
" D-Link Corporation
|
||
|
|
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
|
||
|
|
Taipei City 114, Taiwan, R.O.C
|
||
|
|
Tel: +886-2-66000123
|
||
|
|
E-mail: tsd@dlink.com.tw
|
||
|
|
"
|
||
|
|
DESCRIPTION
|
||
|
|
"A MIB module for LED status.
|
||
|
|
"
|
||
|
|
REVISION "201309130000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Add 'LED off' state for stackingID(12) LED."
|
||
|
|
|
||
|
|
REVISION "201309060000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial version of this MIB module."
|
||
|
|
::= { dlinkIndustrialCommon 163 }
|
||
|
|
|
||
|
|
-- -----------------------------------------------------------------------------
|
||
|
|
dLedMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwLedMIB 0 }
|
||
|
|
dLedMIBObjects OBJECT IDENTIFIER ::= { dlinkSwLedMIB 1 }
|
||
|
|
dLedMIBConformance OBJECT IDENTIFIER ::= { dlinkSwLedMIB 2 }
|
||
|
|
|
||
|
|
--------------------------------------------------------------------------------
|
||
|
|
|
||
|
|
dLedInfoTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF DLedInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table consists of a list of information of LEDs."
|
||
|
|
::= { dLedMIBObjects 1 }
|
||
|
|
|
||
|
|
dLedInfoEntry OBJECT-TYPE
|
||
|
|
SYNTAX DLedInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry contains information of one box."
|
||
|
|
INDEX {dLedBoxId}
|
||
|
|
::= { dLedInfoTable 1 }
|
||
|
|
|
||
|
|
DLedInfoEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
dLedBoxId
|
||
|
|
INTEGER,
|
||
|
|
dLedSysLedStatus
|
||
|
|
OCTET STRING,
|
||
|
|
dLedIfLedStatus
|
||
|
|
OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
dLedBoxId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable uniquely identifies the box in the stack, module in a
|
||
|
|
rack and the value 1 MUST be used for non-modular devices."
|
||
|
|
::= { dLedInfoEntry 1 }
|
||
|
|
|
||
|
|
dLedSysLedStatus OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is a set of system LED indicators.
|
||
|
|
Every type LED's format is as follow:
|
||
|
|
+-------------------------------------+
|
||
|
|
| LED | LED | Data |...| Data |
|
||
|
|
| Type | Length | | | |
|
||
|
|
+-------------------------------------+
|
||
|
|
1octet 1octet 3octet
|
||
|
|
|
||
|
|
LED Type(1 octet):
|
||
|
|
rps(1) - indicates RPS LED,
|
||
|
|
console(2) - indicates console LED,
|
||
|
|
master(3) - indicates device role LED,
|
||
|
|
sdCard(4) - indicates SD card LED,
|
||
|
|
linkMode(5) - indicates link mode LED,
|
||
|
|
poeMode(6) - indicates PoE mode LED,
|
||
|
|
alarm(7) - indicates alarm LED,
|
||
|
|
sysPower(8) - indicates system power LED,
|
||
|
|
mgmtPort(9) - indicates management port LED,
|
||
|
|
fan(10) - indicates device's fan LED,
|
||
|
|
sioPort(11) - indicates SIO port LED,
|
||
|
|
stackingID(12) - indicates stacking ID LED
|
||
|
|
|
||
|
|
LED Length(1 octet): indicates Data's length of a specified LED type in number of octets.
|
||
|
|
|
||
|
|
Data(3 octets): indicates LED status of specified LED type. Three consecutive octets are used
|
||
|
|
to represent the information of one LED. If given LED type has more than one LEDs,
|
||
|
|
there are multiple such triads in the data field.
|
||
|
|
|
||
|
|
If LED Type is stackingID(12), below predefined values represent stacking ID LED's
|
||
|
|
status, with the most significant byte in the first octet.
|
||
|
|
index box id LED display
|
||
|
|
0x0 -- '0'
|
||
|
|
0x1 -- '1'
|
||
|
|
0x2 -- '2'
|
||
|
|
0x3 -- '3'
|
||
|
|
0x4 -- '4'
|
||
|
|
0x5 -- '5'
|
||
|
|
0x6 -- '6'
|
||
|
|
0x7 -- '7'
|
||
|
|
0x8 -- '8'
|
||
|
|
0x9 -- '9'
|
||
|
|
0xA -- '10'
|
||
|
|
0xB -- '11'
|
||
|
|
0xC -- '12'
|
||
|
|
0xD -- '13'
|
||
|
|
0xE -- '14'
|
||
|
|
0xF -- '15'
|
||
|
|
0x10 -- '16'
|
||
|
|
0x11 -- '17'
|
||
|
|
0x12 -- '18'
|
||
|
|
0x13 -- '19'
|
||
|
|
0x100 -- 'H'
|
||
|
|
0x101 -- 'h'
|
||
|
|
0x102 -- 'E'
|
||
|
|
0x103 -- 'G'
|
||
|
|
|
||
|
|
0xfff -- LED off state
|
||
|
|
|
||
|
|
Else these 3 octets shows LED's status value,format is as below:
|
||
|
|
+-------------------------+
|
||
|
|
| LED Instance | LED |
|
||
|
|
| Index | Status |
|
||
|
|
+-------------------------+
|
||
|
|
1 octet 2 octet
|
||
|
|
|
||
|
|
LED instance index(high octet) indicates the instance ID of specified LED type.
|
||
|
|
For example, if the LED type is fan(10), it is the fan ID.
|
||
|
|
|
||
|
|
LED status(low 2 octets) is the status of one LED. Its data format is as below:
|
||
|
|
+-----------------------+
|
||
|
|
| Color | LED Lighting |
|
||
|
|
| Bits | Mode |
|
||
|
|
+-----------------------+
|
||
|
|
15 4 3 0
|
||
|
|
|
||
|
|
Bit0 to bit3 indicates the mode of LED lighting.
|
||
|
|
0x0 means this LED is not supported.
|
||
|
|
0x1 means LED is off.
|
||
|
|
0x2 means LED is fixed lighting.
|
||
|
|
0x3 indicates LED is blinking.
|
||
|
|
0x4 indicates LED is alternating lighting between more than one color.
|
||
|
|
Colors are determined by color bits.
|
||
|
|
0x5-0xF are reserved.
|
||
|
|
|
||
|
|
Bit4 to bit15 are color bits, they indicate the LED's specific color. If a
|
||
|
|
color bit is set, it stands for corresponding color. Only when LED lighting mode
|
||
|
|
is alternating lighting(low nibble is 0x4), multi-bit can be set.
|
||
|
|
bit4 - green bit
|
||
|
|
bit5 - amber bit
|
||
|
|
bit6 - red bit
|
||
|
|
bit7-bit15 are reserved.
|
||
|
|
|
||
|
|
If a LED instance consists of more LEDs, for example, if power source has separate input, state
|
||
|
|
LEDs, there will be two LED data and their instance index is the same power ID. One LED data for the input LED,
|
||
|
|
another for the state LED. The meaning of each LED data is device based.
|
||
|
|
+---------------------------------------------------------------------------------------------+
|
||
|
|
| sysPower(8) | 12 | power1 | LED | power1 | LED | power2 | LED | power2 | LED |...
|
||
|
|
| | | | Status | | Status | | Status | | Status |
|
||
|
|
+---------------------------------------------------------------------------------------------+
|
||
|
|
"
|
||
|
|
|
||
|
|
::= { dLedInfoEntry 2 }
|
||
|
|
|
||
|
|
dLedIfLedStatus OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is a set of ethernet port LED indicators. Format is as follow:
|
||
|
|
+--------------------------------------------+
|
||
|
|
| Total Port | Port1 |....| PortN |
|
||
|
|
| Number | LED Status | | LED Status |
|
||
|
|
+--------------------------------------------+
|
||
|
|
1octets 2octets
|
||
|
|
|
||
|
|
Total Port Number(1 octet): indicates the number of following port LED status.
|
||
|
|
|
||
|
|
Port LED Status(2 octets): indicates one ethernet port LED's status, format is as below:
|
||
|
|
+-----------------------+
|
||
|
|
| Color | LED lighting |
|
||
|
|
| bits | mode |
|
||
|
|
+-----------------------+
|
||
|
|
15 4 3 0
|
||
|
|
|
||
|
|
Bit0 to bit3 indicates the mode of LED lighting.
|
||
|
|
0x0 means this LED is not supported.
|
||
|
|
0x1 means LED is off.
|
||
|
|
0x2 means LED is fixed lighting.
|
||
|
|
0x3 indicates LED is blinking.
|
||
|
|
0x4 indicates LED is alternating lighting between more than one color.
|
||
|
|
Colors are determined by color bits.
|
||
|
|
0x5-0xF are reserved.
|
||
|
|
|
||
|
|
Bit4 to bit15 are color bits,they indicate the LED's specific color. If a
|
||
|
|
color bit is set, it stands for corresponding color. Only when LED lighting mode
|
||
|
|
is alternating lighting(low nibble is 0x4), multi-bit can be set.
|
||
|
|
bit4 - green bit
|
||
|
|
bit5 - amber bit
|
||
|
|
bit6 - red bit
|
||
|
|
bit7-bit15 are reserved.
|
||
|
|
|
||
|
|
Each LED Status corresponds to one port, all ethernet port LEDs' status are arranged
|
||
|
|
from lowest number port to high.
|
||
|
|
"
|
||
|
|
::= { dLedInfoEntry 3 }
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- MIB Conformance statements
|
||
|
|
-- *****************************************************************************
|
||
|
|
dLedMIBCompliances OBJECT IDENTIFIER ::= { dLedMIBConformance 1 }
|
||
|
|
|
||
|
|
dLedMIBGroups OBJECT IDENTIFIER ::= { dLedMIBConformance 2 }
|
||
|
|
dLedMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for entities which implement the
|
||
|
|
DLINKSW-LED-MIB."
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
dLedInfoGroup
|
||
|
|
}
|
||
|
|
::= { dLedMIBCompliances 1 }
|
||
|
|
|
||
|
|
dLedInfoGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
dLedSysLedStatus,
|
||
|
|
dLedIfLedStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of objects to display the LED status."
|
||
|
|
::= { dLedMIBGroups 1 }
|
||
|
|
|
||
|
|
END
|