mibs/MIBS/dragonwave/EQUIPMENT-COMMON-MIB

-- File Name : EquipmentCommon_MIB.mib
-- Version   : 1.01.00
-- Date      : May 1, 2015
-- Author    : DragonWave Inc.

EQUIPMENT-COMMON-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
	Counter64, IpAddress, Integer32, TimeTicks, Counter32, Unsigned32
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION, DisplayString, DateAndTime, 
	TimeStamp
		FROM SNMPv2-TC
	equipmentCommon
		FROM DWI-HARMONY-PRIVATE-MIB;

-- Not supported : Opaque
-- [RFC2578]
-- [RFC2579]
-- 
-- Module Identity
-- 

equipmentCommonMib MODULE-IDENTITY
	LAST-UPDATED "200901210000Z"
	ORGANIZATION 
		"DragonWave Inc."
	CONTACT-INFO 
		""
	DESCRIPTION 
		"This MIB Module defines a notification log mechanism and a current alarm list."

	REVISION "200901210000Z"
	DESCRIPTION 
		"Initial Revision"

	REVISION "201501051615Z"
	DESCRIPTION 
		"Corrected EquipmentAlarmActiveTable index order."
::= { equipmentCommon 100 }


-- 
-- History of MIB Changes
-- 
-- 
-- 
-- Textual conventions
-- 

EnableType ::= TEXTUAL-CONVENTION
	STATUS     current
	DESCRIPTION 
		"Enabled/Disabled"
	SYNTAX  INTEGER {
		disabled (0),
		enabled (1)
	}


-- 
-- Node definitions
-- 

equipmentCommonObjects  OBJECT IDENTIFIER ::= { equipmentCommon 1 }
equipmentConfigLog   OBJECT IDENTIFIER ::= { equipmentCommonObjects 1 }
equipmentLog         OBJECT IDENTIFIER ::= { equipmentCommonObjects 2 }
equipmentAlarmList   OBJECT IDENTIFIER ::= { equipmentCommonObjects 3 }
equipmentSnmpTrap    OBJECT IDENTIFIER ::= { equipmentCommonObjects 4 }
equipmentPseudoEventsObjects  OBJECT IDENTIFIER ::= { equipmentCommon 2 }
equipmentMirrorObjects  OBJECT IDENTIFIER ::= { equipmentCommon 3 }

-- 
-- Object definitions: configuration section 
-- 

equipmentEventLogEntryLimit  OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The maximum number of notification entries that may be held
		     in EventLogTable."
	DEFVAL  { 4096 }
	::= { equipmentConfigLog 1 }

-- 
-- Object definitions: event log section 
--                     

equipmentEventLogLastEntry  OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value of equipmentEventLogIndex at the time of the last
		       creation of an entry in the equipmentEventLogTable."
	::= { equipmentLog 1 }

-- 
-- Event Notification Log Table (inspired by RFC 3014)
-- 

equipmentEventLogTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF EquipmentEventLogEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A table of Notification log entries."
	::= { equipmentLog 2 }

equipmentEventLogEntry  OBJECT-TYPE
	SYNTAX 	EquipmentEventLogEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A Notification log entry. Entries appear in this table 
		                         when Notifications occur.  They are removed to make way 
		                         for new entries due to lack of resources or the values of 
		                         equipmentEventLogEntryLimit.If adding an entry would exceed 
		                         equipmentEventLogEntryLimit the oldest entry in that log SHOULD 
		                         be removed to make room for the new one."
	INDEX { equipmentEventLogIndex }
	::= { equipmentEventLogTable 1 }

EquipmentEventLogEntry ::= SEQUENCE {
	equipmentEventLogIndex
		Unsigned32,
	equipmentEventLogTime
		TimeStamp,
	equipmentEventLogDateAndTime
		DateAndTime,
	equipmentEventLogNotificationID
		OBJECT IDENTIFIER,
	equipmentEventLogVariables
		Unsigned32
}

equipmentEventLogIndex  OBJECT-TYPE
	SYNTAX     Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A monotonically increasing integer for the sole purpose of
		     indexing entries within the log.  When it reaches the
		     maximum value,the agent wraps the value back to 1.
		This number should correspond to the number of notifications 
		sent by the agent."
	::= { equipmentEventLogEntry 1 }

equipmentEventLogTime  OBJECT-TYPE
	SYNTAX     TimeStamp
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value of sysUpTime when the entry was placed in the log."
	::= { equipmentEventLogEntry 2 }

equipmentEventLogDateAndTime  OBJECT-TYPE
	SYNTAX     DateAndTime
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The local date and time when the entry was logged, useful when browsing the MIB."
	::= { equipmentEventLogEntry 3 }

equipmentEventLogNotificationID  OBJECT-TYPE
	SYNTAX     OBJECT IDENTIFIER
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The NOTIFICATION-TYPE object identifier of the Notification that
		                 occurred."
	::= { equipmentEventLogEntry 4 }

equipmentEventLogVariables  OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The number of variables in equipmentEventLogVariableTable for this
		       logged notification."
	::= { equipmentEventLogEntry 5 }

-- 
-- Event Log variable Table
-- 

equipmentEventLogVariableTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF EquipmentEventLogVariableEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A table of variables to go with Notification log entries."
	::= { equipmentLog 3 }

equipmentEventLogVariableEntry  OBJECT-TYPE
	SYNTAX 	EquipmentEventLogVariableEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A Notification log entry variable.
		
		     Entries appear in this table when there are variables in
		   the varbind list of a Notification in equipmentEventLogTable."
	INDEX { equipmentEventLogIndex, 
		equipmentEventLogVariableIndex }
	::= { equipmentEventLogVariableTable 1 }

EquipmentEventLogVariableEntry ::= SEQUENCE {
	equipmentEventLogVariableIndex
		Unsigned32,
	equipmentEventLogVariableID
		OBJECT IDENTIFIER,
	equipmentEventLogVariableValueType
		INTEGER,
	equipmentEventLogVariableCounter32Val
		Counter32,
	equipmentEventLogVariableUnsigned32Val
		Unsigned32,
	equipmentEventLogVariableTimeTicksVal
		TimeTicks,
	equipmentEventLogVariableInteger32Val
		Integer32,
	equipmentEventLogVariableOctetStringVal
		OCTET STRING,
	equipmentEventLogVariableIpAddressVal
		IpAddress,
	equipmentEventLogVariableOidVal
		OBJECT IDENTIFIER,
	equipmentEventLogVariableCounter64Val
		Counter64
}

equipmentEventLogVariableIndex  OBJECT-TYPE
	SYNTAX     Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A monotonically increasing integer, starting at 1 for a given
		 equipmentEventLogIndex, for indexing variables within the logged
		     Event Notification."
	::= { equipmentEventLogVariableEntry 1 }

equipmentEventLogVariableID  OBJECT-TYPE
	SYNTAX     OBJECT IDENTIFIER
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The variable's object identifier."
	::= { equipmentEventLogVariableEntry 2 }

equipmentEventLogVariableValueType  OBJECT-TYPE
	SYNTAX     INTEGER {
		counter32 (1),
		unsigned32 (2),
		timeTicks (3),
		integer32 (4),
		ipAddress (5),
		octetString (6),
		objectId (7),
		counter64 (8)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The type of the value.  One and only one of the value
		                 objects that follow must be instantiated, based on this type."
	::= { equipmentEventLogVariableEntry 3 }

-- Not supported: opaque(9)

equipmentEventLogVariableCounter32Val  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'counter32'."
	::= { equipmentEventLogVariableEntry 4 }

equipmentEventLogVariableUnsigned32Val  OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'unsigned32'."
	::= { equipmentEventLogVariableEntry 5 }

equipmentEventLogVariableTimeTicksVal  OBJECT-TYPE
	SYNTAX     TimeTicks
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'timeTicks'."
	::= { equipmentEventLogVariableEntry 6 }

equipmentEventLogVariableInteger32Val  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'integer32'."
	::= { equipmentEventLogVariableEntry 7 }

equipmentEventLogVariableOctetStringVal  OBJECT-TYPE
	SYNTAX     OCTET STRING
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'octetString'."
	::= { equipmentEventLogVariableEntry 8 }

equipmentEventLogVariableIpAddressVal  OBJECT-TYPE
	SYNTAX     IpAddress
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'ipAddress'.
		     Although this seems to be unfriendly for IPv6, we
		     have to recognize that there are a number of older
		     MIBs that do contain an IPv4 format address, known
		     as IpAddress.
		
		  IPv6 addresses are represented using TAddress or
		   InetAddress, and so the underlying datatype is
		     OCTET STRING, and their value would be stored in
		     the equipmentEventLogVariableOctetStringVal column."
	::= { equipmentEventLogVariableEntry 9 }

equipmentEventLogVariableOidVal  OBJECT-TYPE
	SYNTAX     OBJECT IDENTIFIER
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'objectId'."
	::= { equipmentEventLogVariableEntry 10 }

equipmentEventLogVariableCounter64Val  OBJECT-TYPE
	SYNTAX     Counter64
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value when equipmentEventLogVariableValueType is 'counter64'."
	::= { equipmentEventLogVariableEntry 11 }

-- 
-- Opaque type not supported 
-- 
--	equipmentEventLogVariableOpaqueVal          OBJECT-TYPE
-- 	   SYNTAX      Opaque
-- 	   MAX-ACCESS  read-only
-- 	   STATUS      current
-- 	   DESCRIPTION
-- 	    "The value when equipmentEventLogVariableValueType is 'opaque'."
-- 	   ::= { equipmentEventLogVariableEntry 12 }
-- 
-- Object definitions: active alarm list section
-- 
-- 
-- Active Alarm Table 
-- 

equipmentAlarmActiveLastChanged  OBJECT-TYPE
	SYNTAX     TimeTicks
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value of sysUpTime at the time of the last
		       creation or deletion of an entry in the equipmentAlarmActiveTable.
		       Useful in case of polling (no traps mechanism used).
		       If the number of entries has been unchanged since the
		       last re-initialization, then this object contains a zero value."
	::= { equipmentAlarmList 1 }

equipmentAlarmActiveRowCounter  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The number of active alarms row in the table."
	::= { equipmentAlarmList 2 }

equipmentAlarmActiveTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF EquipmentAlarmActiveEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A table of Active Alarms entries."
	::= { equipmentAlarmList 3 }

equipmentAlarmActiveEntry  OBJECT-TYPE
	SYNTAX 	EquipmentAlarmActiveEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"Entries appear in this table when alarms are raised.  They
		        are removed when the alarm is cleared."
	INDEX { equipmentAlarmActiveIndex, 
		equipmentAlarmActiveTime }
	::= { equipmentAlarmActiveTable 1 }

EquipmentAlarmActiveEntry ::= SEQUENCE {
	equipmentAlarmActiveIndex
		Unsigned32,
	equipmentAlarmActiveTime
		TimeStamp,
	equipmentAlarmActiveDateAndTime
		DateAndTime,
	equipmentAlarmActiveName
		DisplayString,
	equipmentAlarmActiveID
		Integer32,
	equipmentAlarmActiveInstance
		Unsigned32,
	equipmentAlarmActiveTrapOID
		OBJECT IDENTIFIER,
	equipmentAlarmActiveSeverity
		INTEGER,
	equipmentAlarmActiveConditionId
		DisplayString
}

equipmentAlarmActiveIndex  OBJECT-TYPE
	SYNTAX     Unsigned32 (1..4294967295)
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"A strictly monotonically increasing integer which
		       acts as the index of entries within the named alarm
		       list.  It wraps back to 1 after it reaches its
		       maximum value."
	::= { equipmentAlarmActiveEntry 1 }

equipmentAlarmActiveTime  OBJECT-TYPE
	SYNTAX     TimeStamp
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		"The value of sysUpTime when the entry was placed in the list.
		       This object facilitates retrieving all instances of
		       alarms that have been raised or have changed state
		       since a given point in time."
	::= { equipmentAlarmActiveEntry 2 }

equipmentAlarmActiveDateAndTime  OBJECT-TYPE
	SYNTAX     DateAndTime
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The local date and time when the error occurred.
		
		       This object facilitates retrieving all instances of
		       alarms that have been raised or have changed state
		       since a given point in time.
		
		       Implementations MUST include the offset from UTC,
		       if available.  Implementation in environments in which
		       the UTC offset is not available is NOT RECOMMENDED."
	::= { equipmentAlarmActiveEntry 3 }

equipmentAlarmActiveName  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"This object indicates the active alarm name."
	::= { equipmentAlarmActiveEntry 4 }

equipmentAlarmActiveID  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"This object indicates the active alarm ID which is the index to the alarm configuration table defined in product specific MIB."
	::= { equipmentAlarmActiveEntry 5 }

equipmentAlarmActiveInstance  OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		""
	::= { equipmentAlarmActiveEntry 6 }

equipmentAlarmActiveTrapOID  OBJECT-TYPE
	SYNTAX     OBJECT IDENTIFIER
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The MIB object identifier of the alarm (contained in an Alarm Notification
		type object) that is occurring."
	::= { equipmentAlarmActiveEntry 7 }

equipmentAlarmActiveSeverity  OBJECT-TYPE
	SYNTAX     INTEGER {
		warning (1),
		minor (2),
		major (3),
		critical (4)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"This object indicates the active alarm severity."
	::= { equipmentAlarmActiveEntry 8 }

equipmentAlarmActiveConditionId  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		""
	::= { equipmentAlarmActiveEntry 9 }

-- 
-- Opaque type not supported
-- 
--	equipmentAlarmActiveSourceOpaqueVal          OBJECT-TYPE
-- 	   SYNTAX      Opaque
-- 	   MAX-ACCESS  read-only
-- 	   STATUS      current
-- 	   DESCRIPTION
-- 	    "The value when value type is 'opaque'.It is coded as follows:
--		code: OCTET STRING(SIZE(1)), fixed to 1 (structure identifier);
--		type: INTEGER, see equipmentEventLogVariableValueType values;
--		value: ASN.1 basic encoding rule"
-- 	   ::= { equipmentAlarmActiveEntry 5 }
-- 
-- Object definitions: trap counter and timestamp
-- 

equipmentOutTrapsCounter  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The counter of the output traps.
		It increases by one every time a new trap is sent to all the managers configured
		in the relevant table. In this way its value is the number of notification events
		occurred since the last agent reset and every manager that reads this value can understand
		whether some event has been lost or not.
		(Note that in general this counter differs from the RFC1213 snmpOutTraps, that counts the
		number of Trap PDUs sent). When the logging mechanism is enabled, it corresponds to the index in the eventlog table"
	::= { equipmentSnmpTrap 1 }

equipmentLastOutTrapTimeStamp  OBJECT-TYPE
	SYNTAX     TimeStamp
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The value of sysUpTime when the last trap was sent."
	::= { equipmentSnmpTrap 2 }

equipmentTrapInfo  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"A string representing additional info that can be used as the varbind in trap. "
	::= { equipmentSnmpTrap 3 }

-- 
-- Object definitions: pseudo-events support
-- 

equipmentConfChangeOid  OBJECT-TYPE
	SYNTAX     OBJECT IDENTIFIER
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The OID of the last node changed. It is sent to the managers in order to
		notify a configuration change."
	::= { equipmentPseudoEventsObjects 1 }

equipmentConfChangeMode  OBJECT-TYPE
	SYNTAX     EnableType
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Enable/Disable of sending ConfChange Trap.
		STORAGE: permanent."
	DEFVAL  { enabled }
	::= { equipmentPseudoEventsObjects 2 }

equipmentConfChangeNotification  NOTIFICATION-TYPE
	OBJECTS { equipmentConfChangeOid, 
		equipmentOutTrapsCounter }
	STATUS     current
	DESCRIPTION 
		"Notification of configuration change."
	::= { equipmentPseudoEventsObjects 3 }

-- 
-- Object definitions: mirror-traps support
-- 

equipmentMirrorFlag  OBJECT-TYPE
	SYNTAX     Integer32 (0..65535)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Fixed to 1=mirror trap"
	::= { equipmentMirrorObjects 1 }

equipmentMirrorColdStart  NOTIFICATION-TYPE
	OBJECTS { equipmentMirrorFlag, 
		equipmentOutTrapsCounter }
	STATUS     current
	DESCRIPTION 
		"A coldStart trap signifies that the SNMP entity,
		               supporting a notification originator application, is
		               reinitializing itself and that its configuration may
		               have been altered."
	::= { equipmentMirrorObjects 2 }
END