david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/enterasys/CT-FASTPATH-DHCPSERVER-MIB

1016 lines
43 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CT-FASTPATH-DHCPSERVER-MIB DEFINITIONS ::= BEGIN
-- LVL7 FASTPATH DHCP Server MIB
-- Copyright LVL7 Systems (2002-2005) All rights reserved.
-- This SNMP Management Information Specification
-- embodies LVL7 System's confidential and proprietary
-- intellectual property. LVL7 Systems retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", LVL7 Systems
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
-- This module provides authoritative definitions for Cabletron's
-- CT-FASTPATH-DHCPSERVER-MIB.
--
-- This module will be extended, as needed.
--
-- Enterasys Networks reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Enterasys and Cabletron products.
--
-- Copyright January 2006 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
Integer32, Unsigned32, TimeTicks, Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, RowPointer, MacAddress,
StorageType, TruthValue, DisplayString, PhysAddress
FROM SNMPv2-TC
-- Place this MIB on CTRON experimental branch.
ctDhcpServerExpMib FROM CTRON-MIB-NAMES;
ctFastPathDHCPServerMIB MODULE-IDENTITY
LAST-UPDATED "200601161932Z" -- Mon Jan 16 19:32 UTC 2006
ORGANIZATION "Enterasys Networks, Inc."
CONTACT-INFO
"Postal: Enterasys Networks
50 Minuteman Rd.
Andover, MA 01810-1008
USA
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"The Enterasys MIB for FASTPATH DHCP Server"
::= { ctDhcpServerExpMib 1 }
--**************************************************************************************
-- ctAgentDhcpServerGroup -> contains MIB objects displaying various properties of a DHCP server
--
--**************************************************************************************
ctAgentDhcpServerGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 1 }
ctAgentDhcpServerAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Admin-mode of the DHCP Server."
DEFVAL { disable }
::= { ctAgentDhcpServerGroup 1 }
ctAgentDhcpServerPingPktNos OBJECT-TYPE
SYNTAX INTEGER (0 | 2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation ."
DEFVAL { 2 }
::= { ctAgentDhcpServerGroup 2 }
ctAgentDhcpServerAutomaticBindingsNos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of IP addresses that have been assigned automatically."
::= { ctAgentDhcpServerGroup 3 }
ctAgentDhcpServerExpiredBindingsNos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of expired leases."
::= { ctAgentDhcpServerGroup 4 }
ctAgentDhcpServerMalformedMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server."
::= { ctAgentDhcpServerGroup 5 }
ctAgentDhcpServerDISCOVERMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server."
::= { ctAgentDhcpServerGroup 6 }
ctAgentDhcpServerREQUESTMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server."
::= { ctAgentDhcpServerGroup 7 }
ctAgentDhcpServerDECLINEMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server."
::= { ctAgentDhcpServerGroup 8 }
ctAgentDhcpServerRELEASEMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server."
::= { ctAgentDhcpServerGroup 9 }
ctAgentDhcpServerINFORMMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server."
::= { ctAgentDhcpServerGroup 10 }
ctAgentDhcpServerOFFERMessagesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server."
::= { ctAgentDhcpServerGroup 11 }
ctAgentDhcpServerACKMessagesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server."
::= { ctAgentDhcpServerGroup 12 }
ctAgentDhcpServerNAKMessagesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server."
::= { ctAgentDhcpServerGroup 13 }
ctAgentDhcpServerClearStatistics OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Clears the DHCP server statistics."
DEFVAL { disable }
::= { ctAgentDhcpServerGroup 14 }
ctAgentDhcpServerBootpAutomatic OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools."
DEFVAL { disable }
::= { ctAgentDhcpServerGroup 15 }
--**********************************************************************************
-- ctAgentDhcpServerPoolConfigGroup
-- This group contains three tables : ctAgentDhcpServerPoolConfigTable,
-- ctAgentDhcpServerBindingTable,
--
-- ctAgentDhcpServerPoolConfigTable -> This table is used to configure a
-- new DHCP address pool on a DHCP server. This table
-- is also used to delete a configured DHCP address pool.
--
-- ctAgentDhcpServerPoolAllocationTable -> This table is used to configure a DHCP address
-- pool for dynamic and manual allocations.
--
-- ctAgentDhcpServerExcludedAddressRangeTable -> This table lists the excluded-address ranges
-- for a DHCP Server
--
-- ctAgentDhcpServerPoolOptionTable -> Table for DHCP Server options
--**********************************************************************************
ctAgentDhcpServerPoolConfigGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 2 }
ctAgentDhcpServerPoolNameCreate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0|1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A pool is created by applying write operation
on this MIB object and providing a new pool-name.
Get operation on this MIB object returns a
null-value, as for the purpose of viewing the
pool name, the user should perform the
traversal of ctAgentDhcpServerPoolConfigTable.
For this reason the get operation on object
ctAgentDhcpServerPoolNameCreate becomes insignificant."
::= { ctAgentDhcpServerPoolConfigGroup 1 }
ctAgentDhcpServerPoolConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerPoolConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server Pool configuration entries."
::= { ctAgentDhcpServerPoolConfigGroup 2 }
ctAgentDhcpServerPoolConfigEntry OBJECT-TYPE
SYNTAX AgentDhcpServerPoolConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server pool."
INDEX { ctAgentDhcpServerPoolIndex }
::= { ctAgentDhcpServerPoolConfigTable 1 }
AgentDhcpServerPoolConfigEntry ::= SEQUENCE {
ctAgentDhcpServerPoolIndex
Unsigned32,
ctAgentDhcpServerPoolName
DisplayString,
ctAgentDhcpServerPoolDefRouter
DisplayString,
ctAgentDhcpServerPoolDNSServer
DisplayString,
ctAgentDhcpServerPoolLeaseTime
Integer32,
ctAgentDhcpServerPoolType
INTEGER,
ctAgentDhcpServerPoolNetbiosNameServer
DisplayString,
ctAgentDhcpServerPoolNetbiosNodeType
INTEGER,
ctAgentDhcpServerPoolNextServer
IpAddress,
ctAgentDhcpServerPoolDomainName
DisplayString,
ctAgentDhcpServerPoolBootfile
DisplayString,
ctAgentDhcpServerPoolRowStatus
RowStatus
}
ctAgentDhcpServerPoolIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Pool Index, which 'll be used as index for the PoolConfig Table."
::= { ctAgentDhcpServerPoolConfigEntry 1 }
ctAgentDhcpServerPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the DHCP Address pool. This value cannot be modified"
::= { ctAgentDhcpServerPoolConfigEntry 2 }
ctAgentDhcpServerPoolDefRouter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the default-router list(each default-router is
separated by comma and the list is terminated by semi-colon) for a DHCP client,
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list."
::= { ctAgentDhcpServerPoolConfigEntry 3 }
ctAgentDhcpServerPoolDNSServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the DNS IP servers(each DNS IP server is
separated by comma and the list is terminated by semi-colon) for a DHCP client,
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list."
::= { ctAgentDhcpServerPoolConfigEntry 4 }
ctAgentDhcpServerPoolLeaseTime OBJECT-TYPE
SYNTAX Integer32 (1..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the duration of the lease(in minutes) for an IP address that is assigened from a
DHCP server to a DHCP client. For infinite leases, lease-time value will be set to
86400."
::= { ctAgentDhcpServerPoolConfigEntry 5 }
ctAgentDhcpServerPoolType OBJECT-TYPE
SYNTAX INTEGER{
un-allocated(0),
dynamic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the type of the binding that is associated with this pool."
::= { ctAgentDhcpServerPoolConfigEntry 6 }
ctAgentDhcpServerPoolNetbiosNameServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the IP address-list of Net BIOS name-servers that are
available to DHCP clients
(each IP address in this list is
separated by comma and the list is terminated by semi-colon),
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list."
::= { ctAgentDhcpServerPoolConfigEntry 7 }
ctAgentDhcpServerPoolNetbiosNodeType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
b-node(1),
p-node(2),
m-node(4),
h-node(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if
node-type is not set to any of the four values."
::= { ctAgentDhcpServerPoolConfigEntry 8 }
ctAgentDhcpServerPoolNextServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address"
::= { ctAgentDhcpServerPoolConfigEntry 9 }
ctAgentDhcpServerPoolDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name."
::= { ctAgentDhcpServerPoolConfigEntry 10 }
ctAgentDhcpServerPoolBootfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name."
::= { ctAgentDhcpServerPoolConfigEntry 11 }
ctAgentDhcpServerPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable is used according to installation
and removal conventions for conceptual rows. When a pool is created by applying write
operation on 'ctAgentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for
a poolEntry is set to 'destroy', the corresponding pool gets deleted. "
::= { ctAgentDhcpServerPoolConfigEntry 12 }
--**********************************************************************************
ctAgentDhcpServerPoolAllocationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerPoolAllocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server's pool entries, showing the binding(dynamic/manual)
specific parameters."
::= { ctAgentDhcpServerPoolConfigGroup 3 }
ctAgentDhcpServerPoolAllocationEntry OBJECT-TYPE
SYNTAX AgentDhcpServerPoolAllocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server's allocation pool."
AUGMENTS { ctAgentDhcpServerPoolConfigEntry }
::= { ctAgentDhcpServerPoolAllocationTable 1 }
-- All objects are of type read-write
AgentDhcpServerPoolAllocationEntry ::= SEQUENCE {
ctAgentDhcpServerPoolAllocationName
DisplayString,
ctAgentDhcpServerDynamicPoolIpAddress
IpAddress,
ctAgentDhcpServerDynamicPoolIpMask
IpAddress,
ctAgentDhcpServerDynamicPoolIpPrefixLength
Unsigned32,
ctAgentDhcpServerPoolAllocationType
INTEGER,
ctAgentDhcpServerManualPoolClientIdentifier
DisplayString,
ctAgentDhcpServerManualPoolClientName
DisplayString,
ctAgentDhcpServerManualPoolClientHWAddr
DisplayString,
ctAgentDhcpServerManualPoolClientHWType
INTEGER,
ctAgentDhcpServerManualPoolIpAddress
IpAddress,
ctAgentDhcpServerManualPoolIpMask
IpAddress,
ctAgentDhcpServerManualPoolIpPrefixLength
Unsigned32
}
ctAgentDhcpServerPoolAllocationName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies name of the DHCP Address pool having dynamic binding.
This value is same as ctAgentDhcpServerPoolName of the
ctAgentDhcpServerPoolConfigTable."
::= { ctAgentDhcpServerPoolAllocationEntry 1 }
ctAgentDhcpServerDynamicPoolIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the DHCP Address pool.
The IP address must be set before setting the IP Mask or IP Prefix Length.
After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'."
::= { ctAgentDhcpServerPoolAllocationEntry 2 }
ctAgentDhcpServerDynamicPoolIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit-combination that renders which portion of the address of the DHCP
address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'."
::= { ctAgentDhcpServerPoolAllocationEntry 3 }
ctAgentDhcpServerDynamicPoolIpPrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the no. of bits that comprise the address-prefix.
The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before.
This value shows 0, if the binding type is 'un-allocated',or,'mnaual'."
::= { ctAgentDhcpServerPoolAllocationEntry 4 }
ctAgentDhcpServerPoolAllocationType OBJECT-TYPE
SYNTAX INTEGER{
un-allocated(0),
dynamic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the type of the binding that is associated with this pool."
::= { ctAgentDhcpServerPoolAllocationEntry 5 }
ctAgentDhcpServerManualPoolClientIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the unique identifier (in colon separated hexadecimal format)
of a DHCP client. It is valid for manual bindings only.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
To set this object, input should be 7 octets long with the hardware
type in the first octet."
::= { ctAgentDhcpServerPoolAllocationEntry 6 }
ctAgentDhcpServerManualPoolClientName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the name of a DHCP client.
Client name should't include domain-name.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. "
::= { ctAgentDhcpServerPoolAllocationEntry 7 }
ctAgentDhcpServerManualPoolClientHWAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the hardware-address of a DHCP client. It is valid for manual bindings only.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
After hardware-address, hardware-type will be configured."
::= { ctAgentDhcpServerPoolAllocationEntry 8 }
ctAgentDhcpServerManualPoolClientHWType OBJECT-TYPE
SYNTAX INTEGER{
ethernet(1),
ieee802(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It specifies the hardware-type of a DHCP client. It is valid for manual bindings only.
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
Before this, hardware-address must be configured."
DEFVAL { ethernet }
::= { ctAgentDhcpServerPoolAllocationEntry 9 }
ctAgentDhcpServerManualPoolIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the DHCP Address pool for manual binding.
The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'."
::= { ctAgentDhcpServerPoolAllocationEntry 10 }
ctAgentDhcpServerManualPoolIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bit-combination that renders which portion of the address of the DHCP
address pool for a manual binding refers to the network or subnet and which part refers to the host.
The IP address must have been set before.
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'."
::= { ctAgentDhcpServerPoolAllocationEntry 11 }
ctAgentDhcpServerManualPoolIpPrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the no. of bits that comprise the address-prefix.
The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before.
This value shows 0, if the binding type is 'un-allocated',or,'dynamic'."
::= { ctAgentDhcpServerPoolAllocationEntry 12 }
--***********************************************************************************************
ctAgentDhcpServerExcludedAddressRangeCreate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It sets the IP address-ranges(from low to high) that a
DHCP server should not assign to DHCP clients. Each time
this MIB object is set successfully, one excluded range
of IP address will be set.
It is given in format - start and end IP address
separated by '-' and terminated by ';'.
One example would be - 192.168.36.1-200.1.1.1; .
This sets one excluded range of IP address,which
starts at 192.168.36.1 and ends at 200.1.1.1.
If only start IP address is given,
end IP address is assumed to be equal to the start IP
address. Get operation on this MIB object returns a
null-value, as for the purpose of viewing the
exclude-address ranges, the user should perform the
traversal of ctAgentDhcpServerExcludedAddressRangeTable.
For this reason the get operation on object
ctAgentDhcpServerExcludedAddressRangeCreate becomes insignificant."
::= { ctAgentDhcpServerPoolConfigGroup 4 }
ctAgentDhcpServerExcludedAddressRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerExcludedAddressRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server Pool configuration entries."
::= { ctAgentDhcpServerPoolConfigGroup 5 }
ctAgentDhcpServerExcludedAddressRangeEntry OBJECT-TYPE
SYNTAX AgentDhcpServerExcludedAddressRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server excluded address range table."
INDEX { ctAgentDhcpServerExcludedRangeIndex }
::= { ctAgentDhcpServerExcludedAddressRangeTable 1 }
-- All objects are of type read-only, except ctAgentDhcpServerExcludedAddressRangeStatus,
-- which is of type read-write
AgentDhcpServerExcludedAddressRangeEntry ::= SEQUENCE {
ctAgentDhcpServerExcludedRangeIndex
Unsigned32,
ctAgentDhcpServerExcludedStartIpAddress
IpAddress,
ctAgentDhcpServerExcludedEndIpAddress
IpAddress,
ctAgentDhcpServerExcludedAddressRangeStatus
RowStatus
}
ctAgentDhcpServerExcludedRangeIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the index of the excluded IP address-range table."
::= { ctAgentDhcpServerExcludedAddressRangeEntry 1 }
ctAgentDhcpServerExcludedStartIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the starting IP address of the excluded address-range."
::= { ctAgentDhcpServerExcludedAddressRangeEntry 2 }
ctAgentDhcpServerExcludedEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the ending IP address of the excluded address-range."
::= { ctAgentDhcpServerExcludedAddressRangeEntry 3 }
ctAgentDhcpServerExcludedAddressRangeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the excluded address-range. Implemented values
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
When it is set to destroy(6), the corresponding address-range is deleted."
::= { ctAgentDhcpServerExcludedAddressRangeEntry 4 }
--***********************************************************************************************
ctAgentDhcpServerPoolOptionCreate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This sets the option for an existing DHCP Server pool. Here, it is required
to enter the pool-index, for which option is to be set and
the value of the DHCP option code in string-format : pool-index and option code
separated by '-' and terminated by ';', one example would be -> 1-19;
, 1 is the pool-index and 19 is the option code. "
::= { ctAgentDhcpServerPoolConfigGroup 6 }
ctAgentDhcpServerPoolOptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerPoolOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring DHCP Server options."
::= { ctAgentDhcpServerPoolConfigGroup 7 }
ctAgentDhcpServerPoolOptionEntry OBJECT-TYPE
SYNTAX AgentDhcpServerPoolOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server option table."
INDEX { ctAgentDhcpServerPoolOptionIndex,
ctAgentDhcpServerPoolOptionCode }
::= { ctAgentDhcpServerPoolOptionTable 1 }
-- All objects are of type read-write, except the indexes ctAgentDhcpServerPoolOptionIndex and
-- ctAgentDhcpServerPoolOptionCode
-- For a particular poolOption entry, option data ( ASCII, HEX and IP Address) can be
-- entered multiple times provided data-format is same each time.
AgentDhcpServerPoolOptionEntry ::= SEQUENCE {
ctAgentDhcpServerPoolOptionIndex
Unsigned32,
ctAgentDhcpServerPoolOptionCode
Unsigned32,
ctAgentDhcpServerOptionPoolName
DisplayString,
ctAgentDhcpServerPoolOptionAsciiData
DisplayString,
ctAgentDhcpServerPoolOptionHexData
DisplayString,
ctAgentDhcpServerPoolOptionIpAddressData
DisplayString,
ctAgentDhcpServerPoolOptionStatus
RowStatus
}
ctAgentDhcpServerPoolOptionIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Pool Index alongwith option-code, acts as index for the DHCP Server Option table.
"
::= { ctAgentDhcpServerPoolOptionEntry 1 }
ctAgentDhcpServerPoolOptionCode OBJECT-TYPE
SYNTAX Unsigned32 (1..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the DHCP option code. This alongwith pool-index acts as the index of the
DHCP Server Option table."
::= { ctAgentDhcpServerPoolOptionEntry 2 }
ctAgentDhcpServerOptionPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the DHCP Address pool. This value cannot be modified"
::= { ctAgentDhcpServerPoolOptionEntry 3 }
ctAgentDhcpServerPoolOptionAsciiData OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..441))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies an NVT ASCII character string. ASCII character strings
that contain white space must be delimited by quotation marks.
If an ascii optiondata is entered again, it gets concatenated with the
previous ascii data."
::= { ctAgentDhcpServerPoolOptionEntry 4 }
ctAgentDhcpServerPoolOptionHexData OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..1324))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies semi-colon separated hexadecimal data. Two hexadecimal digits
in hexadecimal character string represents one byte . Hexadecimal strings can
be entered in the following formats :
1) continuous hexadecimal digits like -- 0123456789abcdef
2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f
3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e
4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865
If a Hex optiondata is entered again, it gets concatenated with the
previous Hex data."
::= { ctAgentDhcpServerPoolOptionEntry 5 }
ctAgentDhcpServerPoolOptionIpAddressData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the IP-address list(each IP-address is
separated by comma and the list is terminated by semi-colon) for a DHCP client,
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).
If a IP option is entered again, it gets concatenated with the
previous IP data.
Maximum no. of IP addresses that can be entered at one time is 8.
"
::= { ctAgentDhcpServerPoolOptionEntry 6 }
ctAgentDhcpServerPoolOptionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the DHCP Server Pool option."
::= { ctAgentDhcpServerPoolOptionEntry 7 }
--**************************************************************************************
-- ctAgentDhcpServerLeaseGroup -> contains MIB objects displaying and clearing leases of a DHCP server
--
--**************************************************************************************
ctAgentDhcpServerLeaseGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 3 }
ctAgentDhcpServerLeaseClearAllBindings OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears All the DHCP server bindings."
DEFVAL { disable }
::= { ctAgentDhcpServerLeaseGroup 1}
ctAgentDhcpServerLeaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DHCP Server's Lease entries."
::= { ctAgentDhcpServerLeaseGroup 2 }
ctAgentDhcpServerLeaseEntry OBJECT-TYPE
SYNTAX AgentDhcpServerLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a Dhcp server's leases."
INDEX { ctAgentDhcpServerLeaseIPAddress }
::= { ctAgentDhcpServerLeaseTable 1 }
-- All objects are of type read-only
AgentDhcpServerLeaseEntry ::= SEQUENCE {
ctAgentDhcpServerLeaseIPAddress
IpAddress,
ctAgentDhcpServerLeaseIPMask
IpAddress,
ctAgentDhcpServerLeaseHWAddress
MacAddress,
ctAgentDhcpServerLeaseRemainingTime
TimeTicks,
ctAgentDhcpServerLeaseType
INTEGER,
ctAgentDhcpServerLeaseStatus
RowStatus
}
ctAgentDhcpServerLeaseIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the IP address leased to the client."
::= { ctAgentDhcpServerLeaseEntry 1 }
ctAgentDhcpServerLeaseIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the IP mask of the address leased to the client."
::= { ctAgentDhcpServerLeaseEntry 2 }
ctAgentDhcpServerLeaseHWAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the hardware address of the client."
::= { ctAgentDhcpServerLeaseEntry 3 }
ctAgentDhcpServerLeaseRemainingTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds."
::= { ctAgentDhcpServerLeaseEntry 4 }
ctAgentDhcpServerLeaseType OBJECT-TYPE
SYNTAX INTEGER{
automatic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the type of address lease as Automatic or Manual."
::= { ctAgentDhcpServerLeaseEntry 5 }
ctAgentDhcpServerLeaseStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the address-lease. Implemented values
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
When it is set to destroy(6), the corresponding address-lease is cleared."
::= { ctAgentDhcpServerLeaseEntry 6 }
--**************************************************************************************
-- ctAgentDhcpServerAddressConflictGroup -> contains MIB objects displaying and clearing
-- address conflicts found by a DHCP server, when addresses are offered to the client.
--
--**************************************************************************************
ctAgentDhcpServerAddressConflictGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 4 }
ctAgentDhcpServerClearAllAddressConflicts OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all the address-conflicts found by DHCP server,when set to enable."
DEFVAL { disable }
::= { ctAgentDhcpServerAddressConflictGroup 1}
ctAgentDhcpServerAddressConflictLogging OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" It is used to enable, or disables the logging of address-conflicts on a DHCP Server."
DEFVAL { enable }
::= { ctAgentDhcpServerAddressConflictGroup 2}
ctAgentDhcpServerAddressConflictTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpServerAddressConflictEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the conflicting-address entries."
::= { ctAgentDhcpServerAddressConflictGroup 3 }
ctAgentDhcpServerAddressConflictEntry OBJECT-TYPE
SYNTAX AgentDhcpServerAddressConflictEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a conflicting-address entry."
INDEX { ctAgentDhcpServerAddressConflictIP }
::= { ctAgentDhcpServerAddressConflictTable 1 }
-- All objects are of type read-only, except ctAgentDhcpServerAddressConflictStatus which is
-- of type read-write
AgentDhcpServerAddressConflictEntry ::= SEQUENCE {
ctAgentDhcpServerAddressConflictIP
IpAddress,
ctAgentDhcpServerAddressConflictDetectionType
INTEGER,
ctAgentDhcpServerAddressConflictDetectionTime
TimeTicks,
ctAgentDhcpServerAddressConflictStatus
RowStatus
}
ctAgentDhcpServerAddressConflictIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the conflicting IP address assigned to the client by DHCP server."
::= { ctAgentDhcpServerAddressConflictEntry 1 }
ctAgentDhcpServerAddressConflictDetectionType OBJECT-TYPE
SYNTAX INTEGER{
ping(1),
gratuitousArp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the address-conflict detection-method."
::= { ctAgentDhcpServerAddressConflictEntry 2 }
ctAgentDhcpServerAddressConflictDetectionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the sysUpTime at which the address-conflict was detected."
::= { ctAgentDhcpServerAddressConflictEntry 3 }
ctAgentDhcpServerAddressConflictStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies the row-status of the conflicting-address entry. Implemented values
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
When it is set to destroy(6), the corresponding conflicting-address entry is cleared."
::= { ctAgentDhcpServerAddressConflictEntry 4 }
END
Reference in New Issue Copy Permalink