847 lines
32 KiB
Plaintext
847 lines
32 KiB
Plaintext
|
CTELS100-NG-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
-- ctels100-ng-mib.txt
|
||
|
|
-- Revision: 01.03.00
|
||
|
|
-- Part Number:
|
||
|
|
-- Date: December 15, 1999
|
||
|
|
|
||
|
|
-- Cabletron Systems, Inc.
|
||
|
|
-- 35 Industrial Way, P.O. Box 5005
|
||
|
|
-- Rochester, NH 03867-0505
|
||
|
|
-- (603) 332-9400
|
||
|
|
-- support@ctron.com
|
||
|
|
|
||
|
|
-- This module provides authoritative definitions for part of the
|
||
|
|
-- naming tree below:
|
||
|
|
--
|
||
|
|
-- cabletron { enterprises 52 }
|
||
|
|
--
|
||
|
|
-- This module will be extended, as required.
|
||
|
|
--
|
||
|
|
-- Cabletron Systems reserves the right to make changes in
|
||
|
|
-- specification and other information contained in this document
|
||
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
||
|
|
-- to determine whether any such changes have been made.
|
||
|
|
--
|
||
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
||
|
|
-- indirect, special, or consequential damages whatsoever (including
|
||
|
|
-- but not limited to lost profits) arising out of or related to this
|
||
|
|
-- document or the information contained in it, even if Cabletron
|
||
|
|
-- Systems has been advised of, known, or should have known, the
|
||
|
|
-- possibility of such damages.
|
||
|
|
--
|
||
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
||
|
|
-- a non-exclusive license to use this Specification in connection
|
||
|
|
-- with the management of Cabletron products.
|
||
|
|
--
|
||
|
|
-- Copyright (c)1999 Cabletron Systems
|
||
|
|
--
|
||
|
|
-- This mib is part of the assigned enterprise MIB tree for Cabletron Systems.
|
||
|
|
-- This mib provides management information for the next generation of the
|
||
|
|
-- ELS100 product line (specifically: ELS100-24TX, ELS100-24TXM, and
|
||
|
|
-- ELS100-24TXG), part of the SmartSTACK product line.
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
Counter, mgmt, NetworkAddress, enterprises
|
||
|
|
FROM RFC1155-SMI
|
||
|
|
DisplayString
|
||
|
|
FROM RFC1213-MIB
|
||
|
|
OBJECT-TYPE
|
||
|
|
FROM RFC-1212;
|
||
|
|
-- TRAP-TYPE
|
||
|
|
-- FROM RFC-1215;
|
||
|
|
|
||
|
|
-- All representations of MAC addresses in this MIB Module
|
||
|
|
-- use, as a textual convention (i.e. this convention does
|
||
|
|
-- not affect their encoding), the data type:
|
||
|
|
|
||
|
|
-- DisplayString ::= OCTET STRING
|
||
|
|
|
||
|
|
mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
|
||
|
|
|
||
|
|
|
||
|
|
cabletron OBJECT IDENTIFIER ::= { enterprises 52 }
|
||
|
|
els100 OBJECT IDENTIFIER ::= { cabletron 1011 }
|
||
|
|
|
||
|
|
els100SystemConfig OBJECT IDENTIFIER ::= { els100 1 }
|
||
|
|
-- els100PortTable OBJECT IDENTIFIER ::= { els100 2 }
|
||
|
|
els100Switch OBJECT IDENTIFIER ::= { els100 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- System-level configuration information
|
||
|
|
|
||
|
|
els100SysSerialno OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..255))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The serial number of the system."
|
||
|
|
::= { els100SystemConfig 1 }
|
||
|
|
|
||
|
|
els100SysTftpIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the TFTP server from which a software
|
||
|
|
download is to be initiated. This variable must be set
|
||
|
|
before a TFTP download can be started with the
|
||
|
|
els100SysTftpStartDownload variable."
|
||
|
|
::= { els100SystemConfig 2 }
|
||
|
|
|
||
|
|
els100SysTftpFilename OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..255))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of the software upgrade file residing on the
|
||
|
|
TFTP server. Path information must be included in the file
|
||
|
|
name. This variable must be set before a TFTP download can
|
||
|
|
be started with the els100SysTftpStartDownload variable."
|
||
|
|
::= { els100SystemConfig 3 }
|
||
|
|
|
||
|
|
els100SysPowerupCount OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of times the system has powered up since
|
||
|
|
it was shipped from the factory."
|
||
|
|
::= { els100SystemConfig 4 }
|
||
|
|
|
||
|
|
els100SysBrcastCutoffRate OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Broadcast Cutoff Rate of the switch allowing for the
|
||
|
|
control of broadcast storms. The value of this variable sets
|
||
|
|
a per second rate. If the broadcast and unknown destination
|
||
|
|
address frames being forwarded through the system surpass this
|
||
|
|
rate, they are dropped. Valid values for this parameter are
|
||
|
|
in the range (100..500000)."
|
||
|
|
::= { els100SystemConfig 5 }
|
||
|
|
|
||
|
|
els100SysGatewayIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the next hop router (gateway) to which
|
||
|
|
frames destined for an IP subnet different than what the
|
||
|
|
system resides are sent."
|
||
|
|
::= { els100SystemConfig 6 }
|
||
|
|
|
||
|
|
els100SysTftpStartDownload OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
download (1),
|
||
|
|
noDownload (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Start a TFTP download. A SET of this variable with the
|
||
|
|
value download (1) initiates a TFTP download to upgrade the
|
||
|
|
system software. The variables els100SysTftpIPAddress and
|
||
|
|
els100SysTftpFilename must be configured before a download
|
||
|
|
can begin. A GET of this variable will always return the
|
||
|
|
value noDownload (2)."
|
||
|
|
::= { els100SystemConfig 7 }
|
||
|
|
|
||
|
|
els100SysBootPDhcpEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable the operation of the BootP and DHCP
|
||
|
|
protocols on the system. These protocols are used for
|
||
|
|
automatically configuring the system's IP address
|
||
|
|
information if a properly configured BootP and/or DHCP
|
||
|
|
server exists on the network."
|
||
|
|
::= { els100SystemConfig 8 }
|
||
|
|
|
||
|
|
-- els100SysRmonStatsHistEnable OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER{
|
||
|
|
-- disable (1),
|
||
|
|
-- enable (2)
|
||
|
|
-- }
|
||
|
|
-- ACCESS read-write
|
||
|
|
-- STATUS mandatory
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Globally enable/disable the operation of the RMON
|
||
|
|
-- Statistics and History Groups on all ports simultaneously."
|
||
|
|
-- ::= { els100SystemConfig 9 }
|
||
|
|
|
||
|
|
els100SysReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
noReset (1),
|
||
|
|
reset (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Initiate a software reset of the system."
|
||
|
|
::= { els100SystemConfig 10 }
|
||
|
|
|
||
|
|
els100SysSyslogServer OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the Syslog Server."
|
||
|
|
::= { els100SystemConfig 11 }
|
||
|
|
|
||
|
|
els100SysLowestSyslogSeverity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
emergency (0),
|
||
|
|
alert (1),
|
||
|
|
critical (2),
|
||
|
|
error (3),
|
||
|
|
warning (4),
|
||
|
|
notice (5),
|
||
|
|
info (6),
|
||
|
|
debug (7)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Lowest Syslog Severity Level. All logs with
|
||
|
|
the same or higher severity will be delivered.
|
||
|
|
Note: higher severity has lower number."
|
||
|
|
::= { els100SystemConfig 12 }
|
||
|
|
|
||
|
|
els100SysComPortEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled(1),
|
||
|
|
enabled(2) -- default
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The administrative state of the Com Port."
|
||
|
|
::= { els100SystemConfig 13 }
|
||
|
|
|
||
|
|
|
||
|
|
els100SysBoardID OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The system board ID."
|
||
|
|
::= { els100SystemConfig 14 }
|
||
|
|
|
||
|
|
-- The port table - indexed by port
|
||
|
|
|
||
|
|
els100PortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Els100PortEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The port table."
|
||
|
|
::= { els100 2 }
|
||
|
|
|
||
|
|
els100PortEntry OBJECT-TYPE
|
||
|
|
SYNTAX Els100PortEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the port table."
|
||
|
|
INDEX { els100Port }
|
||
|
|
::= { els100PortTable 1 }
|
||
|
|
|
||
|
|
Els100PortEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
els100Port
|
||
|
|
INTEGER,
|
||
|
|
els100PortStatus
|
||
|
|
INTEGER,
|
||
|
|
els100PortDuplexStatus
|
||
|
|
INTEGER,
|
||
|
|
els100PortForwardedFrames
|
||
|
|
Counter,
|
||
|
|
els100PortRcvdLocalFrames
|
||
|
|
Counter,
|
||
|
|
els100PortName
|
||
|
|
DisplayString,
|
||
|
|
els100PortEnable
|
||
|
|
INTEGER,
|
||
|
|
els100PortSpeed
|
||
|
|
INTEGER,
|
||
|
|
els100PortAutonegEnable
|
||
|
|
INTEGER,
|
||
|
|
els100PortFlowControlEnable
|
||
|
|
INTEGER,
|
||
|
|
els100PortType
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
els100Port OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of the port, from 1 to the number of ports on
|
||
|
|
the system."
|
||
|
|
::= { els100PortEntry 1 }
|
||
|
|
|
||
|
|
els100PortStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
up (1),
|
||
|
|
down (2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The connection (link) status of the port, either up
|
||
|
|
(linked) or down (not linked)."
|
||
|
|
::= { els100PortEntry 2 }
|
||
|
|
|
||
|
|
els100PortDuplexStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
half (1),
|
||
|
|
full (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The duplex status of the port, either half duplex or
|
||
|
|
full duplex."
|
||
|
|
::= { els100PortEntry 3 }
|
||
|
|
|
||
|
|
els100PortForwardedFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of frames received on the port and forwarded
|
||
|
|
to another port on the system module for processing."
|
||
|
|
::= { els100PortEntry 4 }
|
||
|
|
|
||
|
|
els100PortRcvdLocalFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of frames received where the destination is
|
||
|
|
on the port."
|
||
|
|
::= { els100PortEntry 5 }
|
||
|
|
|
||
|
|
els100PortName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..60))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A descriptive string of up to 60 characters used by the
|
||
|
|
network administrator to name the port."
|
||
|
|
::= { els100PortEntry 6 }
|
||
|
|
|
||
|
|
els100PortEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The enable status of the port, either enable or disable."
|
||
|
|
::= { els100PortEntry 7 }
|
||
|
|
|
||
|
|
els100PortSpeed OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
tenMbps (1),
|
||
|
|
oneHundredMbps(2),
|
||
|
|
oneThousandMbps(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The speed the port is operating at: 10Mbps, or
|
||
|
|
100Mbps, or 1000Mbps."
|
||
|
|
::= { els100PortEntry 8 }
|
||
|
|
|
||
|
|
els100PortAutonegEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The auto-negotiation status of the port, either enable
|
||
|
|
or disable. When in the enable (2) state, the port will
|
||
|
|
automatically configure its duplex and speed operation."
|
||
|
|
::= { els100PortEntry 9 }
|
||
|
|
|
||
|
|
els100PortFlowControlEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The state of flow control operation of the port, either
|
||
|
|
enable or disable."
|
||
|
|
::= { els100PortEntry 10 }
|
||
|
|
|
||
|
|
els100PortType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
ieee10BaseT(2),
|
||
|
|
ieee100BaseTx(3),
|
||
|
|
ieee100BaseFx-MM(4),
|
||
|
|
ieee100BaseFx-SM(5),
|
||
|
|
ieee1000BaseCx(6),
|
||
|
|
ieee1000BaseLx(7),
|
||
|
|
ieee1000BaseSx(8),
|
||
|
|
ieee1000BaseT(9),
|
||
|
|
ieee1000BaseX(10)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Port physical interface type."
|
||
|
|
::= { els100PortEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Switch-level information and configuration
|
||
|
|
|
||
|
|
els100SwitchIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the system."
|
||
|
|
::= { els100Switch 1 }
|
||
|
|
|
||
|
|
els100SwitchSubnetMask OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The subnet mask associated with the IP address of the system."
|
||
|
|
::= { els100Switch 2 }
|
||
|
|
|
||
|
|
els100ActiveAgingTime OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The aging time of entries in the MAC address forwarding table
|
||
|
|
of the system."
|
||
|
|
::= { els100Switch 3 }
|
||
|
|
|
||
|
|
-- els100PurgeAgingTime OBJECT-TYPE
|
||
|
|
-- SYNTAX INTEGER
|
||
|
|
-- ACCESS read-write
|
||
|
|
-- STATUS mandatory
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The purge aging time of entries in the MAC address forwarding
|
||
|
|
-- table of the system."
|
||
|
|
-- ::= { els100Switch 4 }
|
||
|
|
|
||
|
|
els100SwitchSTPStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
on (1),
|
||
|
|
off (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Spanning Tree status of the system, enter on or off."
|
||
|
|
::= { els100Switch 5 }
|
||
|
|
|
||
|
|
els100SwitchManager OBJECT IDENTIFIER ::= { els100Switch 6 }
|
||
|
|
|
||
|
|
els100SwitchTrapRcvr1 OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the first SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 1 }
|
||
|
|
|
||
|
|
els100SwitchTrapCommunity1 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..60))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The community name of the first SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 2 }
|
||
|
|
|
||
|
|
els100SwitchTrapRcvr2 OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the second SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 3 }
|
||
|
|
|
||
|
|
els100SwitchTrapCommunity2 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..60))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The community name of the second SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 4 }
|
||
|
|
|
||
|
|
els100SwitchTrapRcvr3 OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the third SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 5 }
|
||
|
|
|
||
|
|
els100SwitchTrapCommunity3 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..60))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The community name of the third SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 6 }
|
||
|
|
|
||
|
|
els100SwitchTrapRcvr4 OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the fourth SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 7 }
|
||
|
|
|
||
|
|
els100SwitchTrapCommunity4 OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..60))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The community name of the fourth SNMP manager to which traps
|
||
|
|
from the system are directed."
|
||
|
|
::= { els100SwitchManager 8 }
|
||
|
|
|
||
|
|
els100SwitchPortMirroringStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Port Mirroring status of the system, either disable
|
||
|
|
or enable."
|
||
|
|
::= { els100Switch 7 }
|
||
|
|
|
||
|
|
els100SwitchMirroredPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The port that is being mirrored - the source."
|
||
|
|
::= { els100Switch 8 }
|
||
|
|
|
||
|
|
els100SwitchMirroringPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The port that is mirroring - the destination."
|
||
|
|
::= { els100Switch 9 }
|
||
|
|
|
||
|
|
els100SwitchXmitMirrorEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable the mirroring of transmitted traffic
|
||
|
|
out the mirrored port to the mirroring port."
|
||
|
|
::= { els100Switch 10 }
|
||
|
|
|
||
|
|
els100SwitchRcvMirrorEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Enable or disable the mirroring of received traffic
|
||
|
|
into the mirrored port to the mirroring port."
|
||
|
|
::= { els100Switch 11 }
|
||
|
|
|
||
|
|
els100SwitchVlanEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Globally enable or disable the VLAN operation of the
|
||
|
|
system."
|
||
|
|
::= { els100Switch 12 }
|
||
|
|
|
||
|
|
-- Switch Info Vlan table - indexed by VLAN
|
||
|
|
|
||
|
|
els100SwitchVlanConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Els100SwitchVlanEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The VLAN configuration table."
|
||
|
|
::= { els100Switch 13 }
|
||
|
|
|
||
|
|
els100SwitchVlanEntry OBJECT-TYPE
|
||
|
|
SYNTAX Els100SwitchVlanEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the VLAN configuration table."
|
||
|
|
INDEX { els100SwitchVlanId }
|
||
|
|
::= { els100SwitchVlanConfigTable 1 }
|
||
|
|
|
||
|
|
Els100SwitchVlanEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
els100SwitchVlanId
|
||
|
|
INTEGER,
|
||
|
|
els100SwitchVlanName
|
||
|
|
DisplayString,
|
||
|
|
els100SwitchVlanPorts
|
||
|
|
OCTET STRING,
|
||
|
|
els100SwitchVlanEgressPorts
|
||
|
|
OCTET STRING,
|
||
|
|
els100SwitchVlanStatus
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
els100SwitchVlanId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of the VLAN, from 1 to the number of VLAN's
|
||
|
|
supported on the system."
|
||
|
|
::= { els100SwitchVlanEntry 1 }
|
||
|
|
|
||
|
|
els100SwitchVlanName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..60))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A descriptive string of up to 60 characters used by the
|
||
|
|
network administrator to name the VLAN."
|
||
|
|
::= { els100SwitchVlanEntry 2 }
|
||
|
|
|
||
|
|
els100SwitchVlanPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports in the VLAN. For systems supporting
|
||
|
|
tagged VLAN's, these are the ports to which packets
|
||
|
|
on the VLAN are sent untagged. Each octet within the
|
||
|
|
value of this object specifies a set of eight ports,
|
||
|
|
with the first octet specifying ports 1 through 8, the
|
||
|
|
second octet specifying ports 9 through 16, etc. Within
|
||
|
|
each octet, the most significant bit represents the
|
||
|
|
lowest numbered port, and the least significant bit
|
||
|
|
represents the highest numbered port. Thus each port
|
||
|
|
of the system is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1'
|
||
|
|
then that port is included in the VLAN; the port is not
|
||
|
|
included if its bit has a value of '0'."
|
||
|
|
::= { els100SwitchVlanEntry 3 }
|
||
|
|
|
||
|
|
els100SwitchVlanEgressPorts OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of ports defined to be on other VLAN's to which
|
||
|
|
tagged packets destined for this specific VLAN should
|
||
|
|
also be sent. Thus, this variable defines ports on the
|
||
|
|
system that reach stations downstream which are on this
|
||
|
|
VLAN and to which traffic may be forwarded. Each octet
|
||
|
|
within the value of this object specifies a set of eight
|
||
|
|
ports, with the first octet specifying ports 1 through 8,
|
||
|
|
the second octet specifying ports 9 through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents the
|
||
|
|
lowest numbered port, and the least significant bit
|
||
|
|
represents the highest numbered port. Thus each port
|
||
|
|
of the system is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1'
|
||
|
|
then that port is included in the VLAN; the port is not
|
||
|
|
included if its bit has a value of '0'."
|
||
|
|
::= { els100SwitchVlanEntry 4 }
|
||
|
|
|
||
|
|
els100SwitchVlanStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
enable (1),
|
||
|
|
disable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Control variable used to enable or disable the operation
|
||
|
|
of the associated VLAN in the system."
|
||
|
|
::= { els100SwitchVlanEntry 5 }
|
||
|
|
|
||
|
|
els100SwitchVlanPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Els100SwitchVlanPortEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The VLAN port configuration table."
|
||
|
|
::= { els100Switch 14 }
|
||
|
|
|
||
|
|
els100SwitchVlanPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX Els100SwitchVlanPortEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the VLAN port configuration table."
|
||
|
|
INDEX { els100SwitchVlanPortId }
|
||
|
|
::= { els100SwitchVlanPortTable 1 }
|
||
|
|
|
||
|
|
Els100SwitchVlanPortEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
els100SwitchVlanPortId
|
||
|
|
INTEGER,
|
||
|
|
els100SwitchVlanPvid
|
||
|
|
INTEGER,
|
||
|
|
els100SwitchVlanPortType
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
els100SwitchVlanPortId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (0..63)
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of the port, from 1 to number of ports
|
||
|
|
in the system."
|
||
|
|
::= { els100SwitchVlanPortEntry 1 }
|
||
|
|
|
||
|
|
els100SwitchVlanPvid OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER (1..4095)
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The port's VLAN ID. For tagged VLAN's, this variable
|
||
|
|
defines a 12 bit port VLAN ID (PVID) used as the
|
||
|
|
identifier of the VLAN in the packet tag."
|
||
|
|
::= { els100SwitchVlanPortEntry 2 }
|
||
|
|
|
||
|
|
els100SwitchVlanPortType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
hybrid (1),
|
||
|
|
access (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"For tagged VLAN's, the VLAN port type, either hybrid or
|
||
|
|
access. Hybrid ports allow both tagged and untagged
|
||
|
|
packets to enter the switch. Access ports only accept
|
||
|
|
untagged packets."
|
||
|
|
::= { els100SwitchVlanPortEntry 3 }
|
||
|
|
|
||
|
|
els100SwitchPriorityEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Globally enable or disable the Class of Service traffic
|
||
|
|
priority mechanism for the system."
|
||
|
|
::= { els100Switch 15 }
|
||
|
|
|
||
|
|
els100SwitchPriorityThreshold OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The global priority threshold level for the system
|
||
|
|
at which VLAN tagged frames entering the associated
|
||
|
|
port are assigned a high priority. This variable can
|
||
|
|
have a value from (0...7). Traffic with a priority level
|
||
|
|
equal to or above this value are high priority. Traffic
|
||
|
|
with a priority level below this value are normal priority."
|
||
|
|
::= { els100Switch 16 }
|
||
|
|
|
||
|
|
els100SwitchPriorityPortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Els100SwitchPriorityPortEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The priority port table."
|
||
|
|
::= { els100Switch 17 }
|
||
|
|
|
||
|
|
els100SwitchPriorityPortEntry OBJECT-TYPE
|
||
|
|
SYNTAX Els100SwitchPriorityPortEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the port priority table."
|
||
|
|
INDEX { els100SwitchPriorityPortId }
|
||
|
|
::= { els100SwitchPriorityPortTable 1 }
|
||
|
|
|
||
|
|
Els100SwitchPriorityPortEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
els100SwitchPriorityPortId
|
||
|
|
INTEGER,
|
||
|
|
els100SwitchPriorityDefault
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
els100SwitchPriorityPortId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number, from 1 to number of ports in the
|
||
|
|
system."
|
||
|
|
::= { els100SwitchPriorityPortEntry 1 }
|
||
|
|
|
||
|
|
els100SwitchPriorityDefault OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The port priority level assigned to untagged
|
||
|
|
traffic entering the associated port. This variable
|
||
|
|
can have a value in the range (0...7). This value is
|
||
|
|
compared to the value of the els100SwitchPriorityThreshold
|
||
|
|
variable to determine if the traffic on the port is
|
||
|
|
high or normal."
|
||
|
|
::= { els100SwitchPriorityPortEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
els100SwitchSpanningTreeStandby OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER{
|
||
|
|
disable (1),
|
||
|
|
enable (2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Globally enable or disable Spanning Tree Standby.
|
||
|
|
If set to disable, every port will instanly enter
|
||
|
|
forwarding mode after link up"
|
||
|
|
::= { els100Switch 18 }
|
||
|
|
|
||
|
|
END
|