mibs/MIBS/enterasys/CTRON-DLSW-MIB

1060 lines
34 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CTRON-DLSW-MIB DEFINITIONS ::= BEGIN
-- Ctron Data Link Switching MIB
-- Revision: 1.00.00
-- Date: October 20, 1995
-- Part Number:
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for part
-- of the naming tree below:
--
-- cabletron { enterprises 52 }
--
-- This module will be extended, as additional sub-sections
-- of this naming tree are defined.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 95 Cabletron Systems
-- This Cabletron DLSw MIB is derived from the DLSw MIB (proposed
-- by the DLSw MIB RIGlet), IBM 6611 DLSw MIB, and DCL's SOF API Spec.
-- This MIB is defined in SNMPv1 format.
-- Objects in this MIB are arranged into groups. Each group is
-- organized as a set of related objects. The overall structure
-- is shown below.
--
-- DLSw MIB
-- |
-- |== Node Group
-- | |== Node Configuration
-- |
-- |== Port Group
-- | |== Port Table
-- |
-- |== Filter Group
-- | |== Local NETBIOS Filter Table
-- | |== Remote NETBIOS Filter Table
-- | |== Local MAC Filter Table
-- | |== Remote MAC Filter Table
-- |
-- |== Transport Connection Group
-- | |== Transport Connection Table
-- |
-- |== Trap Group
-- |
-- |== Event Log Group
-- | |== Event Log Configuration
-- | |== Event Log Filter Table
-- | |== Event Log Table
-- Node group
-- This mandatory group contains objects required to configure and
-- monitor the operation of this DLSw. In operation, the DLSw
-- requires a bridge number. This value is taken from RFC 1286; (See
-- dot1dSrPortBridgeNum contained within the associated entry in
-- dot1dSrPortTable). Furthermore, the DLSw also requires an IP
-- address. This value is taken from MIB II; (See ifIndex contained
-- within the associated entry in ifTable).
-- Port group
-- This mandatory group contains a table which contains an entry for
-- each DLSw port on a local ring/segment. Each entry contains objects
-- required to configure and monitor the operation of that port. In
-- operation, each port also requires a local ring/segment number.
-- This value is taken from RFC 1286; (See dot1dSrPortLocalSegment
-- contained within the associated entry in dot1dSrPortTable).
-- Filter Group
-- This mandatory group contains objects required to configure and
-- monitor the operation of each type filter. It also contains a table
-- for each type filter, the entries of which define a set of filter
-- parameters. Local filters act on frames received on any port (ie.
-- from the local ring/segment). Remote filters act on frames
-- received on any transport connection (ie. from another DLSw).
-- Transport Connection Group
-- A Transport Connection is a full-duplex reliable connection
-- (presently TCP) between this DLSw and another Partner DLSw.
-- This mandatory group contains objects required to configure and
-- monitor the operation of Transport Connections. It also contains
-- a table whose entries describe defined or existing Transport
-- Connections.
-- Trap Group
-- This group contains SNMP Traps used to notify the management
-- application of a change in this DLSw configuration. Presently
-- traps are issued after a transport connection becomes enabled
-- or disabled.
-- Event Log Group
IMPORTS
TimeTicks, IpAddress
FROM RFC1155-SMI
ctDLSW
FROM CTRON-MIB-NAMES
DisplayString
FROM RFC1213-MIB
MacAddress
FROM BRIDGE-MIB
OBJECT-TYPE
FROM RFC-1212;
-- DisplayString ::= OCTET STRING
-- MacAddress ::= OCTET STRING (SIZE (6))
NBName ::= DisplayString (SIZE (0..16))
-- Cabletron's Data Link Switching Mib groups
ctdlswNode OBJECT IDENTIFIER ::= { ctDLSW 1 }
ctdlswNodeConfig OBJECT IDENTIFIER ::= { ctdlswNode 1 }
ctdlswPort OBJECT IDENTIFIER ::= { ctDLSW 2 }
ctdlswFilter OBJECT IDENTIFIER ::= { ctDLSW 3 }
ctdlswTConn OBJECT IDENTIFIER ::= { ctDLSW 4 }
ctdlswTrap OBJECT IDENTIFIER ::= { ctDLSW 5 }
ctdlswEvent OBJECT IDENTIFIER ::= { ctDLSW 6 }
ctdlswEventLogConfig OBJECT IDENTIFIER ::= { ctdlswEvent 1 }
ctdlswEventLogFilterTable OBJECT IDENTIFIER ::= { ctdlswEvent 2 }
ctdlswEventLogTable OBJECT IDENTIFIER ::= { ctdlswEvent 3 }
-- *******************************************************************
-- DLSw Node Group
-- *******************************************************************
-- ===================================================================
-- DLSw Node Configuration
-- ===================================================================
ctdlswVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the DLSw firmware
in textual format."
::= { ctdlswNodeConfig 1 }
ctdlswAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disable(2), -- shut down DLSw services
enable(3) -- start up DLSw services
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the system-wide administrative state of DLSw services."
::= { ctdlswNodeConfig 2 }
ctdlswOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- inactive
enabled(3) -- active
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current system-wide status of DLSw services."
::= { ctdlswNodeConfig 3 }
ctdlswUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the time (in hundredths of a second) since the DLSw
services portion of the system was enabled."
::= { ctdlswNodeConfig 4 }
ctdlswOperVirtualRingNumber OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the operational ring/segment number that uniquely
identifies the virtual segment to which this DLSw is connected.
This object may only be modified when ctdlswOperStatus is
disabled."
DEFVAL { 1 }
::= { ctdlswNodeConfig 5 }
ctdlswNBLocalFilterType OBJECT-TYPE
SYNTAX INTEGER { block(1), pass(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of filtering to be applied
to NetBIOS frames received on a local LAN segment.
If set to block(1), any frame matching any entry in
ctdlswNBLocalFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswNBLocalFilterTable will be forwarded."
::= { ctdlswNodeConfig 6 }
ctdlswNBRemoteFilterType OBJECT-TYPE
SYNTAX INTEGER { block(1), pass(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of filtering to be applied to
NetBIOS frames received from a remote DLSw partner.
If set to block(1), any frame matching any entry in
ctdlswNBRemoteFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswNBRemoteFilterTable will be forwarded."
::= { ctdlswNodeConfig 7 }
ctdlswMacLocalFilterType OBJECT-TYPE
SYNTAX INTEGER { block(1), pass(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of address filtering to be applied
to SNA MAC frames received on a local LAN segment.
If set to block(1), any frame matching any entry in
ctdlswMacLocalFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswMacLocalFilterTable will be forwarded."
::= { ctdlswNodeConfig 8 }
ctdlswMacRemoteFilterType OBJECT-TYPE
SYNTAX INTEGER { block(1), pass(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of address filtering to be applied
to SNA MAC frames received from a remote DLSw partner.
If set to block(1), any frame matching any entry in
ctdlswMacRemoteFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswMacRemoteFilterTable will be forwarded."
::= { ctdlswNodeConfig 9 }
ctdlswAcceptDynamicTConn OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this DLSw allows unconfigured DLSw partners
to establish transport connections. Yes(1) means unconfigured
DLSw partners may establish transport connections with this
DLSw. No(2) means only user configured DLSw partners may
establish transport connections with this DLSw."
::= { ctdlswNodeConfig 10 }
ctdlswDefaultPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the index of the port whose associated IP address
will be used to identify this DLSw node to its DLSw partners.
The value must be consistent with 'ifIndex' of mib-II."
::= { ctdlswNodeConfig 11 }
-- *******************************************************************
-- DLSw Port Group
-- *******************************************************************
-- ==================================================================
-- DLSw Port Table
-- ==================================================================
ctdlswPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each port, and specifies
configuration parameters used to establish circuits over that
port. This table is indexed by ctdlswPortName, which
identifies the port for which an entry exists. These port
configuration entries will be provided automatically based on
the physical port configuration. These entries cannot be
created or deleted - only modified."
::= { ctdlswPort 1 }
ctdlswPortEntry OBJECT-TYPE
SYNTAX CtdlswPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies configuration parameters for a port for
which the entry exists."
INDEX { ctdlswPortName }
::= { ctdlswPortTable 1 }
CtdlswPortEntry ::= SEQUENCE {
ctdlswPortIndex INTEGER,
ctdlswPortName DisplayString,
ctdlswPortAddress MacAddress,
ctdlswPortAdminStatus INTEGER,
ctdlswPortOperStatus INTEGER,
ctdlswPortUpTime TimeTicks
}
ctdlswPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies a unique value for each port. Values are derived
from 'ifIndex' of mib-II."
::= { ctdlswPortEntry 1 }
ctdlswPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the user friendly name for this port."
::= { ctdlswPortEntry 2 }
ctdlswPortAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the MAC address of this port."
::= { ctdlswPortEntry 3 }
ctdlswPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of DLSw frame forwarding
for this port."
::= { ctdlswPortEntry 4 }
ctdlswPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- inactive
enabled(3) -- active
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the current operating status of DLSw frame
forwarding for this port."
::= { ctdlswPortEntry 5 }
ctdlswPortUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the time (in hundredths of a second) since this port
was enabled. A value of zero means this port is not presently
enabled."
::= { ctdlswPortEntry 6 }
-- *******************************************************************
-- DLSw Filter Group
-- *******************************************************************
-- ==================================================================
-- DLSw Local NETBIOS Name Filter Table
--
-- The local NetBIOS filter table applies to NetBIOS frames generated on
-- locally attached LANS.
-- ===================================================================
ctdlswLocalNBFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswLocalNBFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of NETBIOS source-destination name pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from locally generated
NetBIOS frames are compared against entries in this table."
::= { ctdlswFilter 1 }
ctdlswLocalNBFilterEntry OBJECT-TYPE
SYNTAX CtdlswLocalNBFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information for one NetBIOS source-destination name pair."
INDEX { ctdlswLocalNBFilterSrcName, ctdlswLocalNBFilterDestName }
::= { ctdlswLocalNBFilterTable 1 }
CtdlswLocalNBFilterEntry ::= SEQUENCE {
ctdlswLocalNBFilterSrcName NBName,
ctdlswLocalNBFilterDestName NBName,
ctdlswLocalNBFilterControl INTEGER
}
ctdlswLocalNBFilterSrcName OBJECT-TYPE
SYNTAX NBName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source NETBIOS name to filter on."
::= { ctdlswLocalNBFilterEntry 1 }
ctdlswLocalNBFilterDestName OBJECT-TYPE
SYNTAX NBName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination NETBIOS NAME to filter on."
::= { ctdlswLocalNBFilterEntry 2 }
ctdlswLocalNBFilterControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
create(2),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1)."
::= { ctdlswLocalNBFilterEntry 3 }
-- ==================================================================
-- DLSw Remote NETBIOS Name Filter Table
--
-- The remote NetBIOS filter table applies to NetBIOS frames received from
-- remote DLSw partners.
-- ===================================================================
ctdlswRemoteNBFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswRemoteNBFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of NETBIOS source-destination name pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from NetBIOS frames received
from remote DLSw partners are compared against entries in this table."
::= { ctdlswFilter 2 }
ctdlswRemoteNBFilterEntry OBJECT-TYPE
SYNTAX CtdlswRemoteNBFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information for one NetBIOS source-destination name pair."
INDEX { ctdlswRemoteNBFilterSrcName, ctdlswRemoteNBFilterDestName }
::= { ctdlswRemoteNBFilterTable 1 }
CtdlswRemoteNBFilterEntry ::= SEQUENCE {
ctdlswRemoteNBFilterSrcName NBName,
ctdlswRemoteNBFilterDestName NBName,
ctdlswRemoteNBFilterControl INTEGER
}
ctdlswRemoteNBFilterSrcName OBJECT-TYPE
SYNTAX NBName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source NETBIOS name to filter on."
::= { ctdlswRemoteNBFilterEntry 1 }
ctdlswRemoteNBFilterDestName OBJECT-TYPE
SYNTAX NBName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination NETBIOS name to filter on."
::= { ctdlswRemoteNBFilterEntry 2 }
ctdlswRemoteNBFilterControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
create(2),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1)."
::= { ctdlswRemoteNBFilterEntry 3 }
-- ===================================================================
-- DLSw Local SNA MAC Address Filter Table
--
-- The local MAC filter table applies to SNA MAC frames generated on locally
-- attached LANS.
-- ==================================================================
ctdlswLocalMacFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswLocalMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of source-destination MAC address pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from locally generated
SNA MAC frames are compared against entries in this table."
::= { ctdlswFilter 3 }
ctdlswLocalMacFilterEntry OBJECT-TYPE
SYNTAX CtdlswLocalMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information for one source-destination MAC address pair."
INDEX { ctdlswLocalMacFilterSrcAddr, ctdlswLocalMacFilterSrcMask,
ctdlswLocalMacFilterDestAddr, ctdlswLocalMacFilterDestMask }
::= { ctdlswLocalMacFilterTable 1 }
CtdlswLocalMacFilterEntry ::= SEQUENCE {
ctdlswLocalMacFilterSrcAddr MacAddress,
ctdlswLocalMacFilterSrcMask MacAddress,
ctdlswLocalMacFilterDestAddr MacAddress,
ctdlswLocalMacFilterDestMask MacAddress,
ctdlswLocalMacFilterControl INTEGER
}
ctdlswLocalMacFilterSrcAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source MAC Address to filter on."
::= { ctdlswLocalMacFilterEntry 1 }
ctdlswLocalMacFilterSrcMask OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source MAC Address mask to filter on."
::= { ctdlswLocalMacFilterEntry 2 }
ctdlswLocalMacFilterDestAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination MAC Address to filter on."
::= { ctdlswLocalMacFilterEntry 3 }
ctdlswLocalMacFilterDestMask OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination MAC Address mask to filter on."
::= { ctdlswLocalMacFilterEntry 4 }
ctdlswLocalMacFilterControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
create(2),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1)."
::= { ctdlswLocalMacFilterEntry 5 }
-- ===================================================================
-- DLSw Remote MAC Address Filter Table
--
-- The remote MAC filter table applies to SNA MAC frames received from
-- remote DLSw partners.
-- ===================================================================
ctdlswRemoteMacFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswRemoteMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of source-destination MAC address pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from SNA MAC frames received
from remote DLSw partners are compared against entries in this table."
::= { ctdlswFilter 4 }
ctdlswRemoteMacFilterEntry OBJECT-TYPE
SYNTAX CtdlswRemoteMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information for one source-destination MAC address pair."
INDEX { ctdlswRemoteMacFilterSrcAddr, ctdlswRemoteMacFilterSrcMask,
ctdlswRemoteMacFilterDestAddr, ctdlswRemoteMacFilterDestMask }
::= { ctdlswRemoteMacFilterTable 1 }
CtdlswRemoteMacFilterEntry ::= SEQUENCE {
ctdlswRemoteMacFilterSrcAddr MacAddress,
ctdlswRemoteMacFilterSrcMask MacAddress,
ctdlswRemoteMacFilterDestAddr MacAddress,
ctdlswRemoteMacFilterDestMask MacAddress,
ctdlswRemoteMacFilterControl INTEGER
}
ctdlswRemoteMacFilterSrcAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source MAC Address to filter on."
::= { ctdlswRemoteMacFilterEntry 1 }
ctdlswRemoteMacFilterSrcMask OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source MAC Address mask to filter on."
::= { ctdlswRemoteMacFilterEntry 2 }
ctdlswRemoteMacFilterDestAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination MAC Address to filter on."
::= { ctdlswRemoteMacFilterEntry 3 }
ctdlswRemoteMacFilterDestMask OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination MAC Address mask to filter on."
::= { ctdlswRemoteMacFilterEntry 4 }
ctdlswRemoteMacFilterControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
create(2),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1)."
::= { ctdlswRemoteMacFilterEntry 5 }
-- *******************************************************************
-- DLSw Transport Connection (Partner) Group
-- *******************************************************************
-- ===================================================================
-- DLSw Transport Connection (Partner) Table
-- ===================================================================
ctdlswTConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswTConnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of transport connections which are either user defined
or dynamically created for this DLSw."
::= { ctdlswTConn 1 }
ctdlswTConnEntry OBJECT-TYPE
SYNTAX CtdlswTConnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { ctdlswTConnRemoteTAddr }
::= { ctdlswTConnTable 1 }
CtdlswTConnEntry ::= SEQUENCE {
ctdlswTConnRemoteTAddr IpAddress,
ctdlswTConnControl INTEGER,
ctdlswTConnUpTime TimeTicks,
ctdlswTConnOperStatus INTEGER,
ctdlswTConnType INTEGER
}
ctdlswTConnRemoteTAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the remote transport address for this transport
connection. It can be defined by the user, or established
dynamically upon receiving a connection setup request from
another DLSw."
::= { ctdlswTConnEntry 1 }
ctdlswTConnControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
create(2),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will
return other(1)."
::= { ctdlswTConnEntry 2 }
ctdlswTConnUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the time (in hundredths of a second) since this
transport connection was last established. A value of zero
means this transport connection is not presently established."
::= { ctdlswTConnEntry 3 }
ctdlswTConnOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- inactive
enabled(3), -- active
pendingDisable(4), -- deactivate in progress
pendingEnable(5) -- activate in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the status of this transport connection."
::= { ctdlswTConnEntry 4 }
ctdlswTConnType OBJECT-TYPE
SYNTAX INTEGER {
configured(1),
dynamic(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the means by which this transport connection was
determined. Configured(1) means this entry was user defined.
Dynamic(2) means this entry was not user defined but was
created as a result of a connection initiated by another DLSw."
::= { ctdlswTConnEntry 5 }
-- *******************************************************************
-- DLSW EVENT LOG GROUP
-- *******************************************************************
-- ...............................................................
-- Event Log Configuration
-- ...............................................................
ctdlswEventAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the administrative state of Data Link Switching event
logging. enabled(3) causes the event log to become active.
disabled(2) causes the event log to become inactive."
DEFVAL { disabled }
::= { ctdlswEventLogConfig 1 }
ctdlswEventMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the maximum number of entries allowed in the event log
table. When the number of entries reaches the value of
ctdlswEventMaxEntries the first (oldest) entry is deleted
to allow a new entry to be added."
DEFVAL { 100 }
::= { ctdlswEventLogConfig 2 }
ctdlswEventTraceAll OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enabled(3) allows logging of all event types.
disabled(2) causes the event log filter table to specify
which events to log."
DEFVAL { enabled }
::= { ctdlswEventLogConfig 3 }
-- ...............................................................
-- Event Log Filter Table
-- ...............................................................
ctdlswEventFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains descriptions of how to filter log entries."
::= { ctdlswEventLogFilterTable 1 }
ctdlswEventFilterEntry OBJECT-TYPE
SYNTAX CtdlswEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the filter for log entries. The
instance ctdlswEventProtocol refers to the instance used
in the nwRtgProtocolTable and nwComponentTable specified
by the ctrouter-mib.txt. "
INDEX { ctdlswEventFltrProtocol, ctdlswEventFltrIfNum }
::= { ctdlswEventFilterTable 1 }
CtdlswEventFilterEntry ::= SEQUENCE {
ctdlswEventFltrProtocol INTEGER,
ctdlswEventFltrIfNum INTEGER,
ctdlswEventFltrControl INTEGER,
ctdlswEventFltrType INTEGER,
ctdlswEventFltrSeverity INTEGER,
ctdlswEventFltrAction INTEGER
}
ctdlswEventFltrProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Selects the protocol to log events from."
::= { ctdlswEventFilterEntry 1 }
ctdlswEventFltrIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the port on which to log events."
::= { ctdlswEventFilterEntry 2 }
ctdlswEventFltrControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2),
add(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this field to delete will allow entries to be
removed from the table. This is done by adding new entries
with instance fields that match the entry to be removed from
the table. The new entry being added must have this control
field set to delete in order for the matching entry already
in the table to be deleted. Setting this field to add will
add the entry to the table."
::= { ctdlswEventFilterEntry 3 }
ctdlswEventFltrType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
error(32)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This bit field mask filter will allow only events of
certain types to be logged. By default all types will be
logged. Clearing event types from this field will cause
those types not to be logged. Adding event types to this
field will enable those types to be logged. "
::= { ctdlswEventFilterEntry 4 }
ctdlswEventFltrSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This filter controls the amount of logging by ignoring events
of lower priority than that specified by the filter value.
Specifying highest(1) causes all events except those of highest
severity to be ignored. Specifying highmed(2) causes lowest
severity events to be ignored. Specifying highlow(3) causes
all events to be logged. highmed(2) is the default setting."
::= { ctdlswEventFilterEntry 5 }
ctdlswEventFltrAction OBJECT-TYPE
SYNTAX INTEGER {
log(1),
trap(2),
logTrap(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies how the events are to be logged.
Specifying log(1) stores the events in the event log
table (defined below). Specifying trap(2) sends events
out through the trap mechanism. Specifying logTrap(3)
does both. "
::= { ctdlswEventFilterEntry 6 }
-- ...............................................................
-- Event Log Table
-- ...............................................................
ctdlswEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtdlswEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains all events that have been logged."
::= { ctdlswEventLogTable 1 }
ctdlswEventEntry OBJECT-TYPE
SYNTAX CtdlswEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies events that have been logged."
INDEX { ctdlswEventNumber }
::= { ctdlswEventTable 1 }
CtdlswEventEntry ::= SEQUENCE {
ctdlswEventNumber INTEGER,
ctdlswEventTime TimeTicks,
ctdlswEventType INTEGER,
ctdlswEventSeverity INTEGER,
ctdlswEventProtocol INTEGER,
ctdlswEventIfNum INTEGER,
ctdlswEventTextString OCTET STRING
}
ctdlswEventNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number uniquely identifies events."
::= { ctdlswEventEntry 1 }
ctdlswEventTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This number specifies when the event was logged."
::= { ctdlswEventEntry 2 }
ctdlswEventType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
error(32)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies type of event logged."
::= { ctdlswEventEntry 3 }
ctdlswEventSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the severity of the event logged."
::= { ctdlswEventEntry 4 }
ctdlswEventProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the protocol where the event occured."
::= { ctdlswEventEntry 5 }
ctdlswEventIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the port the event occurred on."
::= { ctdlswEventEntry 6 }
ctdlswEventTextString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the actual text string to be logged."
::= { ctdlswEventEntry 7 }
END