mibs/MIBS/enterasys/CTRON-FDDI-STAT-MIB

254 lines
9.0 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CTRON-FDDI-STAT-MIB DEFINITIONS ::= BEGIN
-- ctron-fddi-stat-mib.txt.
-- Revision: 1.00.00
-- Date: February 5, 1996
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise-specific connection MIB.
--
-- This module will be extended, as needed.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 95 Cabletron Systems
IMPORTS
TimeTicks
FROM RFC1155-SMI
ctFDDIStats
FROM CTRON-MIB-NAMES
OBJECT-TYPE
FROM RFC-1212;
ctFDDIStatsUtil OBJECT IDENTIFIER ::= { ctFDDIStats 1 }
ctFDDIStatsCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIStatsCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows control over the creation of FDDI
utilization statistics. This is done by providing an
object that when accessed latches the statistics into
the stats table."
::= { ctFDDIStatsUtil 1 }
ctFDDIStatsCtlEntry OBJECT-TYPE
SYNTAX CtFDDIStatsCtlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Defines a specific control entry."
INDEX { ctFDDISlot, ctFDDISMT, ctFDDIPath }
::= { ctFDDIStatsCtlTable 1 }
CtFDDIStatsCtlEntry ::= SEQUENCE {
ctFDDISlot
INTEGER,
ctFDDISMT
INTEGER,
ctFDDIPath
INTEGER,
ctFDDINextEntry
INTEGER,
ctFDDIResetPeak
INTEGER
}
ctFDDISlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific slot for which this connection entry is
defined. If the entry corresponds to a slotless chassis
system, then this entry will have the value of 0."
::= { ctFDDIStatsCtlEntry 1 }
ctFDDISMT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific instance of SMT for which this entry pertains."
REFERENCE
"The IETF RFC FDDI-SMT73-MIB, fddimibSMTIndex"
::= { ctFDDIStatsCtlEntry 2 }
ctFDDIPath OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific FDDI Path that this connection entry pertains."
REFERENCE
"The IETF RFC FDDI-SMT73-MIB, fddimibPATHIndex"
::= { ctFDDIStatsCtlEntry 3 }
ctFDDINextEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides an identifier of the next entry to be used
in the ctFDDIStatsHistoryTable.
Reading this object will latch FDDI performance data
into a conceptual row in the ctFDDIStatsHistoryTable
indexed by the value just read from ctFDDINextEntry."
::= { ctFDDIStatsCtlEntry 4 }
ctFDDIResetPeak OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object provides the ability to reset the peak
bytes and peak time stamp object. This is accomplished
by setting this object with a value of reset(2). Setting
a value of normal(1) will have no affect.
When read this object will always return normal(1)."
::= { ctFDDIStatsCtlEntry 5 }
ctFDDIStatsHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIStatsHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Provides a history of latched FDDI performance objects.
There is one such object for each entry that has been
latched in the ctFDDIStatsCtlTable.
This table will contain the 10 most recent entries. All
other entries will be lost."
::= { ctFDDIStatsUtil 2 }
ctFDDIStatsHistoryEntry OBJECT-TYPE
SYNTAX CtFDDIStatsHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { ctFDDISlot, ctFDDIStatsIndex }
::= { ctFDDIStatsHistoryTable 1 }
CtFDDIStatsHistoryEntry ::= SEQUENCE {
ctFDDIStatsIndex
INTEGER,
ctFDDIStatsTimeStamp
TimeTicks,
ctFDDIFrames
INTEGER,
ctFDDIBytes
INTEGER,
ctFDDIPeakBytes
INTEGER,
ctFDDIPeakTime
INTEGER,
ctFDDIStatsSMT
INTEGER,
ctFDDIStatsPath
INTEGER
}
ctFDDIStatsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique entry that identifies a particular latched stats
entry. This corresponds directly to a value of
ctFDDINextEntry."
::= { ctFDDIStatsHistoryEntry 1 }
ctFDDIStatsTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime when this entry was created."
::= { ctFDDIStatsHistoryEntry 2 }
ctFDDIFrames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bandwidth utilization in frames per second."
::= { ctFDDIStatsHistoryEntry 3 }
ctFDDIBytes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bandwidth utilization in bytes per second."
::= { ctFDDIStatsHistoryEntry 4 }
ctFDDIPeakBytes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The peak bandwidth utilization in bytes per second."
::= { ctFDDIStatsHistoryEntry 5 }
ctFDDIPeakTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A time stamp when the peak occured."
::= { ctFDDIStatsHistoryEntry 6 }
ctFDDIStatsSMT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The FDDI SMT index for which these statistics pertain.
The value of the object must match a corresponding value
of ctFDDISMT."
::= { ctFDDIStatsHistoryEntry 7 }
ctFDDIStatsPath OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The FDDI MAC path index for which these statistics pertain.
The value of the object must match a corresponding value
of ctFDDIPath."
::= { ctFDDIStatsHistoryEntry 8 }
END