4402 lines
160 KiB
Plaintext
4402 lines
160 KiB
Plaintext
|
CTRON-IP-ROUTER-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
-- ctron-ip-router-mib.txt
|
||
|
|
-- Revision: 1.02.02
|
||
|
|
-- Part Number: 2170986
|
||
|
|
-- Date: May 8, 1998
|
||
|
|
|
||
|
|
|
||
|
|
-- Cabletron Systems, Inc.
|
||
|
|
-- 35 Industrial Way, P.O. Box 5005
|
||
|
|
-- Rochester, NH 03867-0505
|
||
|
|
-- (603) 332-9400
|
||
|
|
-- support@ctron.com
|
||
|
|
|
||
|
|
-- This module provides authoritative definitions for Cabletron's
|
||
|
|
-- enterprise specific IP Routing Services MIB.
|
||
|
|
--
|
||
|
|
-- This module will be extended, as required.
|
||
|
|
--
|
||
|
|
|
||
|
|
-- Cabletron Systems reserves the right to make changes in
|
||
|
|
-- specification and other information contained in this document
|
||
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
||
|
|
-- to determine whether any such changes have been made.
|
||
|
|
--
|
||
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
||
|
|
-- indirect, special, or consequential damages whatsoever (including
|
||
|
|
-- but not limited to lost profits) arising out of or related to this
|
||
|
|
-- document or the information contained in it, even if Cabletron
|
||
|
|
-- Systems has been advised of, known, or should have known, the
|
||
|
|
-- possibility of such damages.
|
||
|
|
--
|
||
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
||
|
|
-- a non-exclusive license to use this Specification in connection
|
||
|
|
-- with the management of Cabletron products.
|
||
|
|
-- Copyright August 95 Cabletron Systems
|
||
|
|
--
|
||
|
|
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
OBJECT-TYPE
|
||
|
|
FROM RFC-1212
|
||
|
|
|
||
|
|
DisplayString, PhysAddress
|
||
|
|
FROM RFC1213-MIB
|
||
|
|
|
||
|
|
nwRtrProtoSuites
|
||
|
|
FROM ROUTER-OIDS
|
||
|
|
|
||
|
|
IpAddress, Counter, TimeTicks, Gauge
|
||
|
|
FROM RFC1155-SMI;
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- The IP Router Group.
|
||
|
|
|
||
|
|
nwIpRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 1 }
|
||
|
|
|
||
|
|
nwIpMibs OBJECT IDENTIFIER ::= { nwIpRouter 1 }
|
||
|
|
nwIpComponents OBJECT IDENTIFIER ::= { nwIpRouter 2 }
|
||
|
|
|
||
|
|
-- Ip Router Component Groups
|
||
|
|
|
||
|
|
nwIpSystem OBJECT IDENTIFIER ::= { nwIpComponents 1 }
|
||
|
|
nwIpForwarding OBJECT IDENTIFIER ::= { nwIpComponents 2 }
|
||
|
|
nwIpTopology OBJECT IDENTIFIER ::= { nwIpComponents 4 }
|
||
|
|
nwIpFib OBJECT IDENTIFIER ::= { nwIpComponents 5 }
|
||
|
|
nwIpEndSystems OBJECT IDENTIFIER ::= { nwIpComponents 6 }
|
||
|
|
nwIpAccessControl OBJECT IDENTIFIER ::= { nwIpComponents 7 }
|
||
|
|
nwIpFilters OBJECT IDENTIFIER ::= { nwIpComponents 8 }
|
||
|
|
nwIpRedirector OBJECT IDENTIFIER ::= { nwIpComponents 9 }
|
||
|
|
nwIpEvent OBJECT IDENTIFIER ::= { nwIpComponents 10 }
|
||
|
|
nwIpWorkGroup OBJECT IDENTIFIER ::= { nwIpComponents 11 }
|
||
|
|
nwIpClientServices OBJECT IDENTIFIER ::= { nwIpComponents 12 }
|
||
|
|
--ctNat OBJECT IDENTIFIER ::= { nwIpClientServices 1 }
|
||
|
|
--ctDhcp OBJECT IDENTIFIER ::= { nwIpClientServices 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Router System Groups
|
||
|
|
|
||
|
|
-- This group contains the objects that pertain to the IP routing
|
||
|
|
-- services at a global, device-wide level.
|
||
|
|
|
||
|
|
nwIpSysConfig OBJECT IDENTIFIER ::= { nwIpSystem 1 }
|
||
|
|
nwIpSysAdministration OBJECT IDENTIFIER ::= { nwIpSystem 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Forwarding Group
|
||
|
|
|
||
|
|
-- This group contains the managed objects used to setup and configure
|
||
|
|
-- the IP router ports for packet forwarding as well as the aggregate
|
||
|
|
-- and per-interface IP packet forwarding counters.
|
||
|
|
|
||
|
|
nwIpFwdSystem OBJECT IDENTIFIER ::= { nwIpForwarding 1 }
|
||
|
|
nwIpFwdInterfaces OBJECT IDENTIFIER ::= { nwIpForwarding 2 }
|
||
|
|
|
||
|
|
nwIpFwdCounters OBJECT IDENTIFIER ::= { nwIpFwdSystem 1 }
|
||
|
|
nwIpFwdIfConfig OBJECT IDENTIFIER ::= { nwIpFwdInterfaces 1 }
|
||
|
|
nwIpFwdIfCounters OBJECT IDENTIFIER ::= { nwIpFwdInterfaces 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Topology Group
|
||
|
|
|
||
|
|
-- Implementation of the nwIpTopology group is optional. This group
|
||
|
|
-- will be implemented by those devices that support Routing Services.
|
||
|
|
-- This group contains the managed objects for the routing and service
|
||
|
|
-- advertisements of the IP router. These managed objects allow for
|
||
|
|
-- the routing agents and service agents to be controlled and monitored
|
||
|
|
-- on a system-wide as well as a router port basis.
|
||
|
|
|
||
|
|
nwIpDistanceVector OBJECT IDENTIFIER ::= { nwIpTopology 1 }
|
||
|
|
nwIpLinkState OBJECT IDENTIFIER ::= { nwIpTopology 2 }
|
||
|
|
|
||
|
|
nwIpRip OBJECT IDENTIFIER ::= { nwIpDistanceVector 1 }
|
||
|
|
|
||
|
|
nwIpRipSystem OBJECT IDENTIFIER ::= { nwIpRip 1 }
|
||
|
|
nwIpRipInterfaces OBJECT IDENTIFIER ::= { nwIpRip 2 }
|
||
|
|
nwIpRipDatabase OBJECT IDENTIFIER ::= { nwIpRip 3 }
|
||
|
|
nwIpRipFilters OBJECT IDENTIFIER ::= { nwIpRip 4 }
|
||
|
|
|
||
|
|
nwIpRipConfig OBJECT IDENTIFIER ::= { nwIpRipSystem 1 }
|
||
|
|
nwIpRipCounters OBJECT IDENTIFIER ::= { nwIpRipSystem 2 }
|
||
|
|
|
||
|
|
nwIpRipIfConfig OBJECT IDENTIFIER ::= { nwIpRipInterfaces 1 }
|
||
|
|
nwIpRipIfCounters OBJECT IDENTIFIER ::= { nwIpRipInterfaces 2 }
|
||
|
|
|
||
|
|
nwIpOspf OBJECT IDENTIFIER ::= { nwIpLinkState 1 }
|
||
|
|
|
||
|
|
nwIpOspfSystem OBJECT IDENTIFIER ::= { nwIpOspf 1 }
|
||
|
|
nwIpOspfInterfaces OBJECT IDENTIFIER ::= { nwIpOspf 2 }
|
||
|
|
nwIpOspfDatabase OBJECT IDENTIFIER ::= { nwIpOspf 3 }
|
||
|
|
nwIpOspfFilters OBJECT IDENTIFIER ::= { nwIpOspf 4 }
|
||
|
|
|
||
|
|
nwIpOspfConfig OBJECT IDENTIFIER ::= { nwIpOspfSystem 1 }
|
||
|
|
nwIpOspfCounters OBJECT IDENTIFIER ::= { nwIpOspfSystem 2 }
|
||
|
|
|
||
|
|
nwIpOspfIfConfig OBJECT IDENTIFIER ::= { nwIpOspfInterfaces 1 }
|
||
|
|
nwIpOspfIfCounters OBJECT IDENTIFIER ::= { nwIpOspfInterfaces 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Forward Information Base (FIB) Group
|
||
|
|
|
||
|
|
-- This group contains the managed objects for the forwarding table of the
|
||
|
|
-- IP router. This table is built from entries in the IP routing table(s)
|
||
|
|
-- and reflects the routes that are considered the best routes to forward on.
|
||
|
|
-- This group is implemented in the IETF IP Forwarding Table (FIB) MIB
|
||
|
|
-- (rfc1354) and by the following system managed objects.
|
||
|
|
|
||
|
|
nwIpFibSystem OBJECT IDENTIFIER ::= { nwIpFib 1 }
|
||
|
|
nwIpOspfFib OBJECT IDENTIFIER ::= { nwIpFib 2 }
|
||
|
|
|
||
|
|
nwIpOspfFibControl OBJECT IDENTIFIER ::= { nwIpOspfFib 1 }
|
||
|
|
nwIpOspfFibEntries OBJECT IDENTIFIER ::= { nwIpOspfFib 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Host End Systems Groups
|
||
|
|
|
||
|
|
-- This group contains the managed objects which control the use of the
|
||
|
|
-- Address Resolution Protocol (ARP) for mapping host addresses to physical
|
||
|
|
-- addresses of each router port ARP cache. Mechanisms are also
|
||
|
|
-- provided which allow 'snooping' such that all directly connected
|
||
|
|
-- end systems using ARP can be discovered along with their addresses.
|
||
|
|
|
||
|
|
nwIpHostsSystem OBJECT IDENTIFIER ::= { nwIpEndSystems 1 }
|
||
|
|
nwIpHostsInterfaces OBJECT IDENTIFIER ::= { nwIpEndSystems 2 }
|
||
|
|
nwIpHostsToMedia OBJECT IDENTIFIER ::= { nwIpEndSystems 3 }
|
||
|
|
|
||
|
|
-- IP Router Filters Group
|
||
|
|
|
||
|
|
-- IP Router Redirector Group
|
||
|
|
|
||
|
|
-- Implementation of the nwIpRedirector group is optional. This group
|
||
|
|
-- will be implemented by device that perform Routing Services. This
|
||
|
|
-- table contains the managed objects for the Broadcast UDP Port
|
||
|
|
-- Redirector within the IP Router.
|
||
|
|
|
||
|
|
nwIpRedirectorSystem OBJECT IDENTIFIER ::= { nwIpRedirector 1 }
|
||
|
|
nwIpRedirectorInterface OBJECT IDENTIFIER ::= { nwIpRedirector 2 }
|
||
|
|
|
||
|
|
-- IP Router Event Log Group
|
||
|
|
|
||
|
|
nwIpEventLogConfig OBJECT IDENTIFIER ::= { nwIpEvent 1 }
|
||
|
|
nwIpEventLogFilterTable OBJECT IDENTIFIER ::= { nwIpEvent 2 }
|
||
|
|
nwIpEventLogTable OBJECT IDENTIFIER ::= { nwIpEvent 3 }
|
||
|
|
|
||
|
|
-- IP Router Work-Group Group
|
||
|
|
|
||
|
|
|
||
|
|
-- IP MIB Group
|
||
|
|
-- This group contains information about the revision level of this
|
||
|
|
-- MIB within the device. It allows verification of the released
|
||
|
|
-- version without having to read other objects.
|
||
|
|
|
||
|
|
nwIpMibRevText OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current revision level of the IP MIB in
|
||
|
|
textual format."
|
||
|
|
::= { nwIpMibs 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP System Configuration Group
|
||
|
|
-- This group contains the objects that pertain to the setup and
|
||
|
|
-- configuration of the IP routing services at a global,
|
||
|
|
-- device-wide level.
|
||
|
|
|
||
|
|
nwIpSysRouterId OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP Address used to uniquely identify the host
|
||
|
|
(device) running IP Routing Services. The value of
|
||
|
|
nwIpSysRouterId is equal to the highest IP Address in
|
||
|
|
the IP Address Table."
|
||
|
|
::= { nwIpSysConfig 1 }
|
||
|
|
|
||
|
|
-- IP System Administration Group
|
||
|
|
-- This group contains the objects that pertain to the administration of
|
||
|
|
-- IP routing services at a global, device-wide level.
|
||
|
|
|
||
|
|
nwIpSysAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- shutdown the router
|
||
|
|
enabled(3) -- startup the router
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of IP Routing Services
|
||
|
|
system-wide. Enabled(3) causes IP Routing Services to
|
||
|
|
become active on all router ports configured and enabled
|
||
|
|
for IP Routing Services. Disabled(2) causes IP Routing
|
||
|
|
Services to become inactive system-wide."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpSysAdministration 1 }
|
||
|
|
|
||
|
|
nwIpSysOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5), -- start-up in progress
|
||
|
|
invalid-config(6) -- not running,invalid config
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the operating condition of IP Routing Services, system-wide.
|
||
|
|
The value of nwIpSysOperStatus indicates any problem with
|
||
|
|
your IP Routing Services configuration. A value of 6
|
||
|
|
indicates that regardless of the value of
|
||
|
|
nwIpSysAdminStatus,IP Routing Services is not operating
|
||
|
|
because of an invalid configuration."
|
||
|
|
::= { nwIpSysAdministration 2 }
|
||
|
|
|
||
|
|
nwIpSysAdminReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
reset(2) -- force a reset
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets IP Routing Services, system-wide. Reset (2)
|
||
|
|
forces a restart of IP Routing Services without a
|
||
|
|
graceful shutdown on any active router ports, without
|
||
|
|
affecting any other routing services."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpSysAdministration 3 }
|
||
|
|
|
||
|
|
nwIpSysOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that nwIpSysOperStatus has been in its current administrative
|
||
|
|
state."
|
||
|
|
::= { nwIpSysAdministration 4 }
|
||
|
|
|
||
|
|
nwIpSysVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current revision level of the IP Routing
|
||
|
|
Services firmware, in textual format."
|
||
|
|
::= { nwIpSysAdministration 5 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP System-wide Packet Forwarding Counters
|
||
|
|
-- This group contains the aggregate (device-wide) IP packet forwarding
|
||
|
|
-- counters. The byte counters include bytes for the network layer on
|
||
|
|
-- up, framing is not included.
|
||
|
|
|
||
|
|
nwIpFwdCtrAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the aggregate
|
||
|
|
(system-wide) IP packet and byte counters. Enabled (3)
|
||
|
|
causes these counters to become active. Disabled (2)
|
||
|
|
causes these counters to become inactive."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpFwdCounters 1 }
|
||
|
|
|
||
|
|
nwIpFwdCtrReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the aggregate (system-wide) IP packet and byte
|
||
|
|
counters. Reset (2) resets the IP aggregate counters to 0.
|
||
|
|
nwIpFwdCtrOperationalTime is also reset to 0."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpFwdCounters 2 }
|
||
|
|
|
||
|
|
nwIpFwdCtrOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that nwIpFwdCtrAdminStatus has been in the current state."
|
||
|
|
::= { nwIpFwdCounters 3 }
|
||
|
|
|
||
|
|
nwIpFwdCtrInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
received, system-wide, during nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 4 }
|
||
|
|
|
||
|
|
nwIpFwdCtrOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
transmitted, system-wide, during nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 5 }
|
||
|
|
|
||
|
|
nwIpFwdCtrFwdPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
forwarded, system-wide, during nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 6 }
|
||
|
|
|
||
|
|
nwIpFwdCtrFilteredPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
administratively filtered, system-wide, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 7 }
|
||
|
|
|
||
|
|
nwIpFwdCtrDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 8 }
|
||
|
|
|
||
|
|
nwIpFwdCtrAddrErrPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime,
|
||
|
|
because of addressing errors in the IP header."
|
||
|
|
::= { nwIpFwdCounters 9 }
|
||
|
|
|
||
|
|
nwIpFwdCtrLenErrPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime,
|
||
|
|
because an invalid packet length is contained in the IP header."
|
||
|
|
::= { nwIpFwdCounters 10 }
|
||
|
|
|
||
|
|
nwIpFwdCtrHdrErrPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
discarded, system-wide, during nwIpFwdCtrOperationalTime,
|
||
|
|
because of an invalid IP header."
|
||
|
|
::= { nwIpFwdCounters 11 }
|
||
|
|
|
||
|
|
nwIpFwdCtrInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that
|
||
|
|
have been received, system-wide, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 12 }
|
||
|
|
|
||
|
|
nwIpFwdCtrOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that have
|
||
|
|
been transmitted, system-wide, during nwIpFwdOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 13 }
|
||
|
|
|
||
|
|
nwIpFwdCtrFwdBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that
|
||
|
|
have been forwarded, system-wide, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 14 }
|
||
|
|
|
||
|
|
nwIpFwdCtrFilteredBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets
|
||
|
|
that have been administratively filtered, system-wide,
|
||
|
|
during nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 15 }
|
||
|
|
|
||
|
|
nwIpFwdCtrDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that
|
||
|
|
have been discarded, system-wide, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 16 }
|
||
|
|
|
||
|
|
nwIpFwdCtrHostInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have
|
||
|
|
been successfully delivered to the local host, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 17 }
|
||
|
|
|
||
|
|
nwIpFwdCtrHostOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
forwarded by the local host, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 18 }
|
||
|
|
|
||
|
|
nwIpFwdCtrHostDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
discarded by the local host, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 19 }
|
||
|
|
|
||
|
|
nwIpFwdCtrHostInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
received by the local host, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 20 }
|
||
|
|
|
||
|
|
nwIpFwdCtrHostOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
transmitted by the local host, during
|
||
|
|
nwIpFwdCtrOperationalTime."
|
||
|
|
::= { nwIpFwdCounters 21 }
|
||
|
|
|
||
|
|
nwIpFwdCtrHostDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that
|
||
|
|
have been discarded by the local host, during
|
||
|
|
nwIpFwdCtrOperationalTime, due to a lack of host resources."
|
||
|
|
::= { nwIpFwdCounters 22 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Forwarding Interface Table
|
||
|
|
-- This table contains the managed objects used to set-up and configure
|
||
|
|
-- each router port.
|
||
|
|
|
||
|
|
nwIpFwdIfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpFwdIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each router port.
|
||
|
|
This table is indexed by nwIpFwdIfIndex, which indicates
|
||
|
|
the value of MIB 2 ifindex which identifies the router
|
||
|
|
port for which each entry exists. "
|
||
|
|
::= { nwIpFwdIfConfig 1 }
|
||
|
|
|
||
|
|
nwIpFwdIfEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpFwdIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the IP Routing Services configuration
|
||
|
|
for the router port for which the entry exists."
|
||
|
|
INDEX { nwIpFwdIfIndex }
|
||
|
|
::= { nwIpFwdIfTable 1 }
|
||
|
|
|
||
|
|
NwIpFwdIfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpFwdIfIndex INTEGER,
|
||
|
|
nwIpFwdIfAdminStatus INTEGER,
|
||
|
|
nwIpFwdIfOperStatus INTEGER,
|
||
|
|
nwIpFwdIfOperationalTime TimeTicks,
|
||
|
|
nwIpFwdIfControl INTEGER,
|
||
|
|
nwIpFwdIfMtu INTEGER,
|
||
|
|
nwIpFwdIfForwarding INTEGER,
|
||
|
|
nwIpFwdIfFrameType INTEGER,
|
||
|
|
nwIpFwdIfAclIdentifier INTEGER,
|
||
|
|
nwIpFwdIfAclStatus INTEGER,
|
||
|
|
nwIpFwdIfCacheControl INTEGER,
|
||
|
|
nwIpFwdIfCacheEntries Counter,
|
||
|
|
nwIpFwdIfCacheHits Counter,
|
||
|
|
nwIpFwdIfCacheMisses Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpFwdIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
||
|
|
port."
|
||
|
|
::= { nwIpFwdIfEntry 1 }
|
||
|
|
|
||
|
|
nwIpFwdIfAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
disabled(2), -- shut-down IP Routing Services,
|
||
|
|
enabled(3) -- start-up IP Routing Services
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of IP Routing Services
|
||
|
|
on the router port for which the entry exists. Enabled (3)
|
||
|
|
causes IP Routing Services to become active. Disabled (2)
|
||
|
|
causes it to become inactive."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpFwdIfEntry 2 }
|
||
|
|
|
||
|
|
nwIpFwdIfOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5), -- start-up in progress
|
||
|
|
invalid-config(6) -- not running,invalid config
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current operating condition of
|
||
|
|
IP Routing Services on the router port for which the
|
||
|
|
entry exists. The value of nwIpFwdIfOperStatus indicates
|
||
|
|
any problem with the configuration of IP routing Services on
|
||
|
|
the router port. A value of 6 indicates that regardless of
|
||
|
|
the value of nwIpFwdIfAdminStatus, IP Routing Services is
|
||
|
|
not operating because of an invalid port-level configuration."
|
||
|
|
::= { nwIpFwdIfEntry 3 }
|
||
|
|
|
||
|
|
nwIpFwdIfOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that nwIpFwdIfOperStatus has been in its current state."
|
||
|
|
::= { nwIpFwdIfEntry 4 }
|
||
|
|
|
||
|
|
nwIpFwdIfControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
add(2),
|
||
|
|
delete(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object does not apply to this protocol. It is a
|
||
|
|
common object, inherited from the MIB framework used to
|
||
|
|
provide a common management interface to all the Cabletron
|
||
|
|
Routing Services protocol-specific MIBs. Setting this object
|
||
|
|
has no effect."
|
||
|
|
DEFVAL { add }
|
||
|
|
::= { nwIpFwdIfEntry 5 }
|
||
|
|
|
||
|
|
nwIpFwdIfMtu OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the Maximum Transmission Unit (MTU) for IP packets
|
||
|
|
on the router port for which the entry exists. This includes
|
||
|
|
the IP header and data, but does not include framing."
|
||
|
|
DEFVAL { 1500 }
|
||
|
|
::= { nwIpFwdIfEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpFwdIfForwarding OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
disabled(2), -- not forwarding,
|
||
|
|
enabled(3) -- forwarding,
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls forwarding of IP packets on the router port for
|
||
|
|
which the entry exists. Enabled (3) causes IP packets to be
|
||
|
|
forwarded. Disabled (2) prevents IP packets from being
|
||
|
|
forwarded."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpFwdIfEntry 7 }
|
||
|
|
|
||
|
|
nwIpFwdIfFrameType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { -- valid media types
|
||
|
|
other(1), -- experimental
|
||
|
|
ethernet(2), -- ethernet
|
||
|
|
snap(3), -- ethernet and fddi
|
||
|
|
slip(5), -- serial line
|
||
|
|
localtalk(7), -- internal SMB-1, read-only
|
||
|
|
nativewan(8), -- wan media types
|
||
|
|
encapenet(9), -- wan media types
|
||
|
|
encapenetsnap(11), -- wan media types
|
||
|
|
encaptrsnap(14), -- wan media types
|
||
|
|
encapfddisnap(16), -- wan media types
|
||
|
|
canonical(17) -- special media, tbd
|
||
|
|
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the framing type for IP packets forwarded on
|
||
|
|
the router port for which the entry exists."
|
||
|
|
DEFVAL { ethernet }
|
||
|
|
::= { nwIpFwdIfEntry 8 }
|
||
|
|
|
||
|
|
nwIpFwdIfAclIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the Access Control ID of the access control
|
||
|
|
list in effect for the IP packets being routed on the router port
|
||
|
|
for which the entry exists. A value of 0 indicates that no
|
||
|
|
access control list is in effect."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { nwIpFwdIfEntry 9 }
|
||
|
|
|
||
|
|
nwIpFwdIfAclStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- do not apply nwIpFwdIfAclIdentifier
|
||
|
|
enabled(3) -- apply nwIpFwdIfAclIdentifier
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the operation of any access control list configured
|
||
|
|
for IP traffic for the IP packets being routed on the router port
|
||
|
|
for which the entry exists. Enabled (3) applies the access control
|
||
|
|
list, indicated by nwIpFwdIfAclIdentifier to all IP traffic being
|
||
|
|
routed on the port. Disabled (2) prevents the access control list
|
||
|
|
from being applied."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpFwdIfEntry 10 }
|
||
|
|
|
||
|
|
nwIpFwdIfCacheControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
disable(2), -- next hop caching disabled,
|
||
|
|
enable(3) -- next hop caching enabled,
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls IP Address caching on the router port for which
|
||
|
|
the entry exists. IP Address caching speeds-up the switching
|
||
|
|
process. When IP Addresses caching is enabled, IP Addresses
|
||
|
|
used for address validation, filtering, and forwarding are
|
||
|
|
stored in the cache. This cache is checked first before
|
||
|
|
doing a full route table lookup, which speeds up the switching
|
||
|
|
process. Enabled (3) turns on IP Address caching. Disabled (2
|
||
|
|
turns it off."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { nwIpFwdIfEntry 11 }
|
||
|
|
|
||
|
|
nwIpFwdIfCacheEntries OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of entries in the IP Address
|
||
|
|
cache on the router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfEntry 12 }
|
||
|
|
|
||
|
|
nwIpFwdIfCacheHits OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of times entries in the IP
|
||
|
|
Address Cache have been used to provide the IP Address
|
||
|
|
required to validate, filter, or forward an IP packet
|
||
|
|
on the router port."
|
||
|
|
::= { nwIpFwdIfEntry 13 }
|
||
|
|
|
||
|
|
nwIpFwdIfCacheMisses OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of times the IP Address required to
|
||
|
|
validate, filter, or forward an IP packet on the router
|
||
|
|
port was not found in the IP Address cache."
|
||
|
|
::= { nwIpFwdIfEntry 14 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The IP Interface Address Table
|
||
|
|
-- This table contains the managed object used to setup and configure
|
||
|
|
-- IP addresses on a per router port basis.
|
||
|
|
|
||
|
|
nwIpAddressTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpAddrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each IP Address
|
||
|
|
assigned to each router port."
|
||
|
|
::= { nwIpFwdIfConfig 2 }
|
||
|
|
|
||
|
|
nwIpAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpAddrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the IP addressing information for
|
||
|
|
the logical IP network for which the entry exists."
|
||
|
|
INDEX { nwIpAddrIfIndex, nwIpAddrIfAddress }
|
||
|
|
::= { nwIpAddressTable 1 }
|
||
|
|
|
||
|
|
NwIpAddrEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpAddrIfIndex INTEGER,
|
||
|
|
nwIpAddrIfAddress IpAddress,
|
||
|
|
nwIpAddrIfControl INTEGER,
|
||
|
|
nwIpAddrIfAddrType INTEGER,
|
||
|
|
nwIpAddrIfMask IpAddress,
|
||
|
|
nwIpAddrIfBcastAddr INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpAddrIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of MIB 2 ifindex, which identifies the router
|
||
|
|
port for which the entry exists."
|
||
|
|
::= { nwIpAddrEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpAddrIfAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the IP Address assigned to the logical IP
|
||
|
|
network for which the entry exist. As multiple IP Addresses
|
||
|
|
may be assigned to a single router port, all addresses
|
||
|
|
assigned to the port must be of the same subnet."
|
||
|
|
::= { nwIpAddrEntry 2 }
|
||
|
|
|
||
|
|
nwIpAddrIfControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
add(2), -- add this entry,
|
||
|
|
delete(3) -- delete this entry
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Set this object to add or delete this entry from the table."
|
||
|
|
DEFVAL { add }
|
||
|
|
::= { nwIpAddrEntry 3 }
|
||
|
|
|
||
|
|
nwIpAddrIfAddrType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
primary(2),
|
||
|
|
secondary(3),
|
||
|
|
workgroup(4)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies whether the IP address, nwIpAddrIfAddress, is
|
||
|
|
the primary, workgroup or secondary IP address for the IP router
|
||
|
|
port for which the entry exists. A primary or workgroup address
|
||
|
|
must be specified before a router port can be enabled."
|
||
|
|
DEFVAL { primary }
|
||
|
|
::= { nwIpAddrEntry 4 }
|
||
|
|
|
||
|
|
nwIpAddrIfMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the Subnet Mask for the logical IP network for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpAddrEntry 5 }
|
||
|
|
|
||
|
|
nwIpAddrIfBcastAddr OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
zeros(2),
|
||
|
|
ones(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the IP broadcast address type for the logical
|
||
|
|
IP network for which the entry exists. A router port may
|
||
|
|
be configured to send IP broadcasts using the all-ones-based
|
||
|
|
format or the all-zeros-based format. nwIpAddrIfBcastAddr
|
||
|
|
determines the value of the broadcast portion of the IP
|
||
|
|
broadcast address being used to address broadcast packets."
|
||
|
|
DEFVAL { ones }
|
||
|
|
::= { nwIpAddrEntry 6 }
|
||
|
|
|
||
|
|
-- IP Forwarding Interfaces Counter Table
|
||
|
|
-- This table contains the objects that specify the packet and byte counters
|
||
|
|
-- for each configured IP router port.
|
||
|
|
|
||
|
|
nwIpFwdIfCtrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpFwdIfCtrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each router port configured
|
||
|
|
and enabled for IP Routing Services."
|
||
|
|
::= { nwIpFwdIfCounters 1 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpFwdIfCtrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry indicates the packet and byte count of IP
|
||
|
|
packets on the router port for which the entry exists."
|
||
|
|
INDEX { nwIpFwdIfCtrIfIndex }
|
||
|
|
::= { nwIpFwdIfCtrTable 1 }
|
||
|
|
|
||
|
|
NwIpFwdIfCtrEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpFwdIfCtrIfIndex INTEGER,
|
||
|
|
nwIpFwdIfCtrAdminStatus INTEGER,
|
||
|
|
nwIpFwdIfCtrReset INTEGER,
|
||
|
|
nwIpFwdIfCtrOperationalTime TimeTicks,
|
||
|
|
nwIpFwdIfCtrInPkts Counter,
|
||
|
|
nwIpFwdIfCtrOutPkts Counter,
|
||
|
|
nwIpFwdIfCtrFwdPkts Counter,
|
||
|
|
nwIpFwdIfCtrFilteredPkts Counter,
|
||
|
|
nwIpFwdIfCtrDiscardPkts Counter,
|
||
|
|
nwIpFwdIfCtrAddrErrPkts Counter,
|
||
|
|
nwIpFwdIfCtrLenErrPkts Counter,
|
||
|
|
nwIpFwdIfCtrHdrErrPkts Counter,
|
||
|
|
nwIpFwdIfCtrInBytes Counter,
|
||
|
|
nwIpFwdIfCtrOutBytes Counter,
|
||
|
|
nwIpFwdIfCtrFwdBytes Counter,
|
||
|
|
nwIpFwdIfCtrFilteredBytes Counter,
|
||
|
|
nwIpFwdIfCtrDiscardBytes Counter,
|
||
|
|
nwIpFwdIfCtrHostInPkts Counter,
|
||
|
|
nwIpFwdIfCtrHostOutPkts Counter,
|
||
|
|
nwIpFwdIfCtrHostDiscardPkts Counter,
|
||
|
|
nwIpFwdIfCtrHostInBytes Counter,
|
||
|
|
nwIpFwdIfCtrHostOutBytes Counter,
|
||
|
|
nwIpFwdIfCtrHostDiscardBytes Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpFwdIfCtrIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of MIB 2 ifindex, which identifies the
|
||
|
|
router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 1 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- counters off
|
||
|
|
enabled(3) -- counters on
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the per-port IP packet
|
||
|
|
and byte counters on the router port for which the entry
|
||
|
|
exists. Enabled (3) causes these counters to become active.
|
||
|
|
Disabled (2) causes these counters to become inactive."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpFwdIfCtrEntry 2 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
reset(2) -- force a reset
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the per-port IP packet and byte counters on the
|
||
|
|
router port for which the entry exists. Reset (2) resets the
|
||
|
|
counters to 0. nwIpFwdIfCtrOperationalTime is also reset to 0."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpFwdIfCtrEntry 3 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
||
|
|
the per-port IP packet and byte counters have been active on
|
||
|
|
the router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 4 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
received, during nwIpFwdIfCtrOperationaltime, on the router
|
||
|
|
port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 5 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have
|
||
|
|
been transmitted, during nwIpFwdIfCtrOperationalTime,
|
||
|
|
on the router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 6 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrFwdPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
forwarded during nwIpFwdIfCtrOperationalTime, on the router
|
||
|
|
port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 7 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrFilteredPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
administratively filtered, during
|
||
|
|
nwIpFwdIfCtrOperationalTime, on the IP router port for
|
||
|
|
which this entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 8 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have
|
||
|
|
been discarded (dropped), during nwIpFwdIfCtrOperationalTime,
|
||
|
|
on the router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 9 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrAddrErrPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
discarded, because of addressing errors in the IP header,
|
||
|
|
during nwIpFwdIfCtrOperationalTime, on the router port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 10 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrLenErrPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been discarded,
|
||
|
|
because an invalid packet length was contained in the IP header, during
|
||
|
|
nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 11 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrHdrErrPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been discarded,
|
||
|
|
because of an invalid IP header, during nwIpFwdIfCtrOperationalTime,
|
||
|
|
on the router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 12 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that have been
|
||
|
|
received, during nwIpFwdIfCtrOperationalTime, on the router port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 13 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that have
|
||
|
|
been transmitted, during nwIpFwdIfCtrOperationalTime, on the router
|
||
|
|
port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 14 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrFwdBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets
|
||
|
|
that have been forwarded, on the router port for which the
|
||
|
|
entry exists, during nwIpFwdIfCtrOperationalTime."
|
||
|
|
::= { nwIpFwdIfCtrEntry 15 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrFilteredBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets
|
||
|
|
that have been administratively filtered, during
|
||
|
|
nwIpFwdIfCtrOperationalTime, on the IP router port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 16 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that
|
||
|
|
have been discarded, during nwIpFwdIfCtrOperationalTime, on
|
||
|
|
the router port for which the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 17 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrHostInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
successfully delivered to the local host, that were received
|
||
|
|
on the router port for which the entry exists, during
|
||
|
|
nwIpFwdIfCtrOperationalTime."
|
||
|
|
::= { nwIpFwdIfCtrEntry 18 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrHostOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets that have been
|
||
|
|
transmitted by the local host, during
|
||
|
|
nwIpFwdIfCtrOperationalTime, on the router port for which the
|
||
|
|
entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 19 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrHostDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of IP packets discarded by the
|
||
|
|
local host due to a lack of host resources, that were
|
||
|
|
received on the router port for which the entry exists,
|
||
|
|
during nwIpFwdIfCtrOperationalTime."
|
||
|
|
::= { nwIpFwdIfCtrEntry 20 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrHostInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that
|
||
|
|
have been successfully delivered to the local host, that
|
||
|
|
were received on the router port for which the entry exists,
|
||
|
|
during nwIpFwdIfCtrOperationalTime. "
|
||
|
|
::= { nwIpFwdIfCtrEntry 21 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrHostOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets that
|
||
|
|
have been transmitted by the local host, during
|
||
|
|
nwIpFwdIfCtrOperationalTime, on the router port for which
|
||
|
|
the entry exists."
|
||
|
|
::= { nwIpFwdIfCtrEntry 22 }
|
||
|
|
|
||
|
|
nwIpFwdIfCtrHostDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the IP packets
|
||
|
|
that have been discarded by the local host due to a lack
|
||
|
|
of host resources, that were received on the router port
|
||
|
|
for which the entry exists, during
|
||
|
|
nwIpFwdIfCtrOperationalTime."
|
||
|
|
::= { nwIpFwdIfCtrEntry 23 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- DistanceVector-based Protocols
|
||
|
|
-- This group contains the managed objects for RIP, IP DistanceVector based
|
||
|
|
-- routing.
|
||
|
|
|
||
|
|
-- IP RIP System Configuration Parameters
|
||
|
|
-- This group contains the objects that pertain to the setup and
|
||
|
|
-- configuration of the IP RIP DistanceVector based routing protocol.
|
||
|
|
|
||
|
|
nwIpRipAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- shutdown the router
|
||
|
|
enabled(3) -- startup the router
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the RIP routing
|
||
|
|
protocol system-wide. Enabled (3) causes RIP to become
|
||
|
|
active on all router ports configured and enabled for
|
||
|
|
IP Routing Services. Disabled (2) causes RIP to become
|
||
|
|
inactive."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpRipConfig 1 }
|
||
|
|
|
||
|
|
nwIpRipOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5), -- start-up in progress
|
||
|
|
invalid-config(6) -- not running, invalid config.
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current operating condition of the RIP
|
||
|
|
routing protocol system-wide. The value of
|
||
|
|
nwIpRipOperStatus indicates any problem with your RIP
|
||
|
|
configuration. A value of 6 indicates that regardless
|
||
|
|
of the value of nwIpRipAdminStatus, RIP is not operating
|
||
|
|
because of an invalid configuration."
|
||
|
|
::= { nwIpRipConfig 2 }
|
||
|
|
|
||
|
|
nwIpRipAdminReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
reset(2) -- force a reset
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the RIP routing protocol. Reset (2) forces a
|
||
|
|
system-wide restart of the protocol system-wide without
|
||
|
|
a graceful shutdown on any active router ports."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpRipConfig 3 }
|
||
|
|
|
||
|
|
nwIpRipOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
||
|
|
nwIpRipOperStatus, has been in its current state."
|
||
|
|
::= { nwIpRipConfig 4 }
|
||
|
|
|
||
|
|
nwIpRipVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current revision level of the RIP routing
|
||
|
|
protocol firmware, in textual format."
|
||
|
|
::= { nwIpRipConfig 5 }
|
||
|
|
|
||
|
|
nwIpRipStackSize OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the stack size of the RIP routing protocol thread.
|
||
|
|
In order for a change of this value to take effect, the
|
||
|
|
protocol (nwIpRipAdminReset), IP Routing Services
|
||
|
|
(nwIpSysAdminReset), or the device running Routing Services
|
||
|
|
must be reset."
|
||
|
|
DEFVAL { 4096 }
|
||
|
|
::= { nwIpRipConfig 6 }
|
||
|
|
|
||
|
|
nwIpRipThreadPriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the run-time execution priority of the RIP
|
||
|
|
routing protocol thread. In order for a change of this
|
||
|
|
value to take effect, RIP (nwIpRipAdminReset), IP Routing
|
||
|
|
Services (nwIpAdminReset), or the device running Routing
|
||
|
|
Services must be reset."
|
||
|
|
DEFVAL { 127 }
|
||
|
|
::= { nwIpRipConfig 7 }
|
||
|
|
|
||
|
|
nwIpRipDatabaseThreshold OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the run-time maximum number of RIP entries that
|
||
|
|
can be held in the RIP route table."
|
||
|
|
DEFVAL { 2000 }
|
||
|
|
::= { nwIpRipConfig 8 }
|
||
|
|
|
||
|
|
nwIpRipAgeOut OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the amount of time, in seconds, that an inactive
|
||
|
|
route table entry will be allowed to remain in the RIP route
|
||
|
|
table before it is aged-out."
|
||
|
|
DEFVAL { 210 }
|
||
|
|
::= { nwIpRipConfig 9 }
|
||
|
|
|
||
|
|
nwIpRipHoldDown OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the amount of time (in seconds) to wait before
|
||
|
|
removing an entry from the route table, after receiving an
|
||
|
|
update indicating that the destination has become unreachable.
|
||
|
|
All routers exchanging RIP routing protocol information must
|
||
|
|
have the same hold down time. The time must be long enough
|
||
|
|
to allow all participating routers to receive the same update."
|
||
|
|
DEFVAL { 120 }
|
||
|
|
::= { nwIpRipConfig 10 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP RIP System (aggregate) Counters
|
||
|
|
-- This group contains the aggregate (device-wide) IP RIP packet and
|
||
|
|
-- byte counters.
|
||
|
|
nwIpRipCtrAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the aggregate (system-wide)
|
||
|
|
RIP routing protocol packet and byte counters. Enabled (3)
|
||
|
|
causes these counters to become active. Disabled (2) causes
|
||
|
|
these counters to become inactive."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpRipCounters 1 }
|
||
|
|
|
||
|
|
nwIpRipCtrReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the aggregate (system-wide) RIP routing protocol
|
||
|
|
packet and byte counters. Reset (2) resets the RIP aggregate
|
||
|
|
counters to 0. nwIpRipCtrOperationalTime is also reset to 0."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpRipCounters 2 }
|
||
|
|
|
||
|
|
nwIpRipCtrOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second, that
|
||
|
|
nwIpRipCtrAdminStatus has been in the current state."
|
||
|
|
::= { nwIpRipCounters 3 }
|
||
|
|
|
||
|
|
nwIpRipCtrInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP packets that have been
|
||
|
|
received, system-wide, during nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 4 }
|
||
|
|
|
||
|
|
nwIpRipCtrOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP packets that have been
|
||
|
|
transmitted, system-wide, during nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 5 }
|
||
|
|
|
||
|
|
nwIpRipCtrFilteredPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP packets that have been
|
||
|
|
administratively filtered, system-wide, during
|
||
|
|
nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 6 }
|
||
|
|
|
||
|
|
nwIpRipCtrDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP packets that have been
|
||
|
|
discarded, system-wide, during nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 7 }
|
||
|
|
|
||
|
|
nwIpRipCtrInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP packets that
|
||
|
|
have been received, system-wide, during
|
||
|
|
nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 8 }
|
||
|
|
|
||
|
|
nwIpRipCtrOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP packets
|
||
|
|
that have been transmitted, system-wide, during
|
||
|
|
nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 9 }
|
||
|
|
|
||
|
|
nwIpRipCtrFilteredBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP packets
|
||
|
|
that have been administratively filtered, system-wide,
|
||
|
|
during nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 10 }
|
||
|
|
|
||
|
|
nwIpRipCtrDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP packets
|
||
|
|
that have been discarded, system-wide, during
|
||
|
|
nwIpRipCtrOperationalTime."
|
||
|
|
::= { nwIpRipCounters 11 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP RIP Interface Table
|
||
|
|
-- This table contains the managed objects used to setup and configure
|
||
|
|
-- RIP on a per router port basis.
|
||
|
|
nwIpRipIfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpRipIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each router port. Each
|
||
|
|
entry can contain different values, allowing the routing
|
||
|
|
protocol configuration to vary from router port to router
|
||
|
|
port. This table is indexed by nwIpRipIfIndex, which
|
||
|
|
indicates the value of MIB 2 ifindex, which identifies the
|
||
|
|
router port for which the entry exists."
|
||
|
|
::= { nwIpRipIfConfig 1 }
|
||
|
|
|
||
|
|
nwIpRipIfEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpRipIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the RIP routing protocol configuration
|
||
|
|
for the router port for which the entry exists."
|
||
|
|
INDEX { nwIpRipIfIndex }
|
||
|
|
::= { nwIpRipIfTable 1 }
|
||
|
|
|
||
|
|
NwIpRipIfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpRipIfIndex INTEGER,
|
||
|
|
nwIpRipIfAdminStatus INTEGER,
|
||
|
|
nwIpRipIfOperStatus INTEGER,
|
||
|
|
nwIpRipIfOperationalTime TimeTicks,
|
||
|
|
nwIpRipIfVersion INTEGER,
|
||
|
|
nwIpRipIfAdvertisement INTEGER,
|
||
|
|
nwIpRipIfFloodDelay INTEGER,
|
||
|
|
nwIpRipIfRequestDelay INTEGER,
|
||
|
|
nwIpRipIfPriority INTEGER,
|
||
|
|
nwIpRipIfHelloTimer INTEGER,
|
||
|
|
nwIpRipIfSplitHorizon INTEGER,
|
||
|
|
nwIpRipIfPoisonReverse INTEGER,
|
||
|
|
nwIpRipIfSnooping INTEGER,
|
||
|
|
nwIpRipIfType INTEGER,
|
||
|
|
nwIpRipIfXmitCost INTEGER,
|
||
|
|
nwIpRipIfAclIdentifier INTEGER,
|
||
|
|
nwIpRipIfAclStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpRipIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
||
|
|
the router port for which the entry exists."
|
||
|
|
::= { nwIpRipIfEntry 1 }
|
||
|
|
|
||
|
|
nwIpRipIfAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- RIP off
|
||
|
|
enabled(3) -- RIP on
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the RIP routing protocol
|
||
|
|
on the router port for which the entry exists. Enabled (3)
|
||
|
|
causes RIP to become active on the router port. Disabled (2)
|
||
|
|
causes RIP to become inactive on the router port."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpRipIfEntry 2 }
|
||
|
|
|
||
|
|
nwIpRipIfOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5) -- start-up in progress
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current operating condition of the RIP
|
||
|
|
routing protocol on the router port for which the entry
|
||
|
|
exists. The value of nwIpRipIfOperStatus indicates any problem
|
||
|
|
with your RIP configuration on the router port. A value of 6
|
||
|
|
indicates that regardless of the value of nwIpRipIfAdminStatus,
|
||
|
|
RIP is not operating on the port because of an invalid
|
||
|
|
configuration."
|
||
|
|
::= { nwIpRipIfEntry 3 }
|
||
|
|
|
||
|
|
nwIpRipIfOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
nwIpRipIfOperStatus, has been in its current state."
|
||
|
|
::= { nwIpRipIfEntry 4 }
|
||
|
|
|
||
|
|
nwIpRipIfVersion OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the revision level of the RIP routing protocol
|
||
|
|
firmware on the router port for which the entry exists, in
|
||
|
|
textual format."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { nwIpRipIfEntry 5 }
|
||
|
|
|
||
|
|
nwIpRipIfAdvertisement OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the interval, in seconds, at which RIP advertises
|
||
|
|
the RIP route table on the router port for which the entry
|
||
|
|
exists."
|
||
|
|
DEFVAL { 30 }
|
||
|
|
::= { nwIpRipIfEntry 6 }
|
||
|
|
|
||
|
|
nwIpRipIfFloodDelay OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the length of time, in seconds, that the RIP routing
|
||
|
|
protocol should wait after discovering that a directly
|
||
|
|
connected route has gone down, before flooding updates
|
||
|
|
(triggered updates) on the router port for which the entry
|
||
|
|
exists. A value of 0 specifies that if a directly connected
|
||
|
|
route goes down, updates should be sent immediately."
|
||
|
|
DEFVAL { 2 }
|
||
|
|
::= { nwIpRipIfEntry 7 }
|
||
|
|
|
||
|
|
nwIpRipIfRequestDelay OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the length of time, in hundredths of a second, that
|
||
|
|
the RIP routing protocol should wait after receiving a
|
||
|
|
route request packet, before sending a response on the
|
||
|
|
router port for which the entry exists. A value of 0
|
||
|
|
specifies that if a route request packet is received on the
|
||
|
|
port, a response should be sent immediately."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { nwIpRipIfEntry 8 }
|
||
|
|
|
||
|
|
nwIpRipIfPriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object does not apply to this protocol. It is a common
|
||
|
|
object, inherited from the MIB framework used to provide a
|
||
|
|
common management interface to all the Cabletron Routing
|
||
|
|
Services protocol-specific MIBs. Setting this object has no
|
||
|
|
effect."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { nwIpRipIfEntry 9 }
|
||
|
|
|
||
|
|
nwIpRipIfHelloTimer OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object does not apply to this protocol. It is a
|
||
|
|
common object, inherited from the MIB framework used to
|
||
|
|
provide a common management interfaced to all the Cabletron
|
||
|
|
Routing Services protocol-specific MIBs. Setting this object
|
||
|
|
has no effect."
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { nwIpRipIfEntry 10 }
|
||
|
|
|
||
|
|
nwIpRipIfSplitHorizon OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the operating condition of Split Horizon on the
|
||
|
|
router port for which the entry exists. When Split Horizon
|
||
|
|
is enabled, the RIP routing protocol keeps track of which
|
||
|
|
router port route information is received on, and prevents
|
||
|
|
information about a route form being sent back out the same
|
||
|
|
router port it was received on."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpRipIfEntry 11 }
|
||
|
|
|
||
|
|
nwIpRipIfPoisonReverse OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the operating condition of Poison Reverse on the
|
||
|
|
router port for which the entry exists. When Poison Reverse
|
||
|
|
is enabled, the RIP routing protocol advertises any downed
|
||
|
|
route as unreachable during the period of time that it must
|
||
|
|
wait before removing the route from the route table."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpRipIfEntry 12 }
|
||
|
|
|
||
|
|
nwIpRipIfSnooping OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- non-snooping mode
|
||
|
|
enabled(3) -- snooping mode
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the operation of RIP Snooping on the router
|
||
|
|
port. When RIP Snooping is enabled the RIP routing protocol
|
||
|
|
operates in passive mode so that it receives route information,
|
||
|
|
builds and maintains a route table, but does not advertise the
|
||
|
|
route table or send updates on the router port for which the
|
||
|
|
entry exists."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpRipIfEntry 13 }
|
||
|
|
|
||
|
|
nwIpRipIfType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
bma(2), -- broadcast media access,
|
||
|
|
nbma(3) -- non-broadcast media access,
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates whether the directly connected network segment
|
||
|
|
does or does not support broadcast media access. If broadcast
|
||
|
|
media access is supported, RIP advertisements are sent out one
|
||
|
|
broadcast packet per router port. If broadcast media is not
|
||
|
|
supported, RIP advertisements are sent directly to each
|
||
|
|
neighbor router access."
|
||
|
|
DEFVAL { bma }
|
||
|
|
::= { nwIpRipIfEntry 14 }
|
||
|
|
|
||
|
|
nwIpRipIfXmitCost OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object does not apply to this protocol. It is a
|
||
|
|
common object, inherited from the MIB framework used to
|
||
|
|
provide a common management interface to all the Cabletron
|
||
|
|
Routing Services protocol-specific MIBs. Setting this object
|
||
|
|
has no effect."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { nwIpRipIfEntry 15 }
|
||
|
|
|
||
|
|
nwIpRipIfAclIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the Access Control ID of the access control
|
||
|
|
list in effect for RIP routing protocol packets on the
|
||
|
|
router port for which the entry exists. A value of 0
|
||
|
|
indicates that there is no access control list in effect
|
||
|
|
for RIP routing protocol packets on the router port."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { nwIpRipIfEntry 16 }
|
||
|
|
|
||
|
|
nwIpRipIfAclStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the operation of the access control list
|
||
|
|
identified by nwIpRipIfAclIdentifier. Enabled (3) applies
|
||
|
|
the access control list to all RIP routing protocol packet
|
||
|
|
traffic on the router port for which the entry exists.
|
||
|
|
Disabled (2) prevents the access control list from being
|
||
|
|
applied."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpRipIfEntry 17 }
|
||
|
|
|
||
|
|
-- IP RIP Interface Counters Table
|
||
|
|
-- This table contains the managed objects for IP RIP packet and byte
|
||
|
|
-- counter on a per router port basis.
|
||
|
|
nwIpRipIfCtrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpRipIfCtrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each router port.This table
|
||
|
|
is indexed by nwIpRipIfCtrIfIndex which indicates the value
|
||
|
|
of MIB 2 ifindex, which identifies the router port for which
|
||
|
|
the entry exists."
|
||
|
|
::= { nwIpRipIfCounters 1 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpRipIfCtrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry indicates the current packet and byte count of
|
||
|
|
RIP routing protocol packets on the router port for which
|
||
|
|
the entry exists."
|
||
|
|
INDEX { nwIpRipIfCtrIfIndex }
|
||
|
|
::= { nwIpRipIfCtrTable 1 }
|
||
|
|
|
||
|
|
NwIpRipIfCtrEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpRipIfCtrIfIndex INTEGER,
|
||
|
|
nwIpRipIfCtrAdminStatus INTEGER,
|
||
|
|
nwIpRipIfCtrReset INTEGER,
|
||
|
|
nwIpRipIfCtrOperationalTime TimeTicks,
|
||
|
|
nwIpRipIfCtrInPkts Counter,
|
||
|
|
nwIpRipIfCtrOutPkts Counter,
|
||
|
|
nwIpRipIfCtrFilteredPkts Counter,
|
||
|
|
nwIpRipIfCtrDiscardPkts Counter,
|
||
|
|
nwIpRipIfCtrInBytes Counter,
|
||
|
|
nwIpRipIfCtrOutBytes Counter,
|
||
|
|
nwIpRipIfCtrFilteredBytes Counter,
|
||
|
|
nwIpRipIfCtrDiscardBytes Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpRipIfCtrIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
||
|
|
the router port for which the entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 1 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
disabled(2), -- counters off,
|
||
|
|
enabled(3) -- counters on,
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the RIP packet and byte
|
||
|
|
counters on the router port for which this entry exists.
|
||
|
|
Enabled (3) causes these counters to become active.
|
||
|
|
Disabled (2) causes these counters to become inactive."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpRipIfCtrEntry 2 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
reset(2) -- force a reset,
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the per-port RIP packet and byte counters on the
|
||
|
|
router port for which this entry exists. Reset (2) resets
|
||
|
|
the counters to 0. nwIpRipIfCtrOperationalTime is also reset
|
||
|
|
to 0."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpRipIfCtrEntry 3 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that nwIpRipIfCtrAdminStatus has been in the current
|
||
|
|
state."
|
||
|
|
::= { nwIpRipIfCtrEntry 4 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP routing protocol packets
|
||
|
|
that have been received, during nwIpRipIfCtrOperationalTime,
|
||
|
|
on the router port for which the entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 5 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP packets that have been
|
||
|
|
transmitted, during nwIpRipIfCtrOperationalTime, on the router
|
||
|
|
port for which the entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 6 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrFilteredPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP packets that have been
|
||
|
|
administratively filtered during nwIpRipIfCtrOperationalTime,
|
||
|
|
on the router port for which the entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 7 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of RIP routing protocol packets
|
||
|
|
that have been discarded, during nwIpRipIfCtrOperationalTime.
|
||
|
|
that were received through the router port for which the entry
|
||
|
|
exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 8 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP routing
|
||
|
|
protocol packets that have been received, during
|
||
|
|
nwIpRipIfCtrOperationalTime, on the router port for which this
|
||
|
|
entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 9 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP routing
|
||
|
|
protocol packets that have been transmitted, during
|
||
|
|
nwIpRipIfCtrOperationalTime, on the router port for which
|
||
|
|
the entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 10 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrFilteredBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP routing
|
||
|
|
protocol packets that have been administratively filtered,
|
||
|
|
during nwIpRipIfCtrOperationalTime, on the router port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 11 }
|
||
|
|
|
||
|
|
nwIpRipIfCtrDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the RIP routing
|
||
|
|
protocol packets that have been discarded during
|
||
|
|
nwIpRipIfCtrOperationalTime, that were received on the
|
||
|
|
router port for which the entry exists."
|
||
|
|
::= { nwIpRipIfCtrEntry 12 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP RIP Routing Table
|
||
|
|
-- This table contains the managed objects for IP RIP route table.
|
||
|
|
nwIpRipRouteTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpRipRouteEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the RIP route table. This table contains
|
||
|
|
an entry for each route learned through the RIP routing
|
||
|
|
protocol. Only the best routes from this table are added to
|
||
|
|
the IP forwarding table to be used for packet switching."
|
||
|
|
::= { nwIpRipDatabase 1 }
|
||
|
|
|
||
|
|
nwIpRipRouteEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpRipRouteEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry describes the RIP route to the destination
|
||
|
|
network for which the entry exists."
|
||
|
|
INDEX { nwIpRipRtNetId, nwIpRipRtIfIndex, nwIpRipRtSrcNode}
|
||
|
|
::= { nwIpRipRouteTable 1 }
|
||
|
|
|
||
|
|
NwIpRipRouteEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpRipRtNetId IpAddress,
|
||
|
|
nwIpRipRtIfIndex INTEGER,
|
||
|
|
nwIpRipRtSrcNode IpAddress,
|
||
|
|
nwIpRipRtMask IpAddress,
|
||
|
|
nwIpRipRtHops INTEGER,
|
||
|
|
nwIpRipRtAge TimeTicks,
|
||
|
|
nwIpRipRtType INTEGER,
|
||
|
|
nwIpRipRtFlags INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpRipRtNetId OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the primary index into the RIP route table. This
|
||
|
|
number indicates the IP Address of the destination for which
|
||
|
|
the entry exists."
|
||
|
|
::= { nwIpRipRouteEntry 1 }
|
||
|
|
|
||
|
|
nwIpRipRtIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a secondary index into IP-RIP route table. This
|
||
|
|
number corresponds to the value of MIB 2 ifindex, which
|
||
|
|
identifies the router port for which the entry exists."
|
||
|
|
::= { nwIpRipRouteEntry 2 }
|
||
|
|
|
||
|
|
nwIpRipRtSrcNode OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a secondary index into the RIP route table. This
|
||
|
|
number indicates the IP Address of the source router from
|
||
|
|
which this route was learned. A value of 0.0.0.0 indicates
|
||
|
|
that the source is on the network segment directly connected
|
||
|
|
to the router port, nwIpRipRtIfIndex."
|
||
|
|
::= { nwIpRipRouteEntry 3 }
|
||
|
|
|
||
|
|
nwIpRipRtMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the Subnet Mask of the IP Address for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpRipRouteEntry 4 }
|
||
|
|
|
||
|
|
nwIpRipRtHops OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of hops required to reach the
|
||
|
|
destination for which the entry exists."
|
||
|
|
::= { nwIpRipRouteEntry 5 }
|
||
|
|
|
||
|
|
nwIpRipRtAge OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time, in seconds, since an update
|
||
|
|
has been received for the route for which the entry exists."
|
||
|
|
::= { nwIpRipRouteEntry 6 }
|
||
|
|
|
||
|
|
nwIpRipRtType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
invalid(2), -- not a valid route,
|
||
|
|
direct(3), -- directly connected,
|
||
|
|
remote(4), -- indirectly connected,
|
||
|
|
static(5), -- Learned from static routes
|
||
|
|
ospf(6) -- Learned from ospf routes
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates whether the destination network is directly
|
||
|
|
connected through the router port specified by
|
||
|
|
nwIpRipRtIfIndex, or is indirectly connected through
|
||
|
|
another router, specified by nwIpRipRtSrcNode."
|
||
|
|
::= { nwIpRipRouteEntry 7 }
|
||
|
|
|
||
|
|
nwIpRipRtFlags OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies properties of the RIP route. The bit mask is
|
||
|
|
as follows: source-changed (1), best-source (2), local net (4),
|
||
|
|
net-down (8), update-fib-only (16)."
|
||
|
|
::= { nwIpRipRouteEntry 8 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Link State-based Protocols
|
||
|
|
-- This group contains the managed objects for OSPF, IP Link State-based
|
||
|
|
-- based routing.
|
||
|
|
|
||
|
|
-- IP OSPF System Configuration Parameters
|
||
|
|
-- This group contains the objects that pertain to the setup and
|
||
|
|
-- configuration of the IP OSPF Link State-based routing protocol.
|
||
|
|
|
||
|
|
|
||
|
|
nwIpOspfAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- shutdown the router
|
||
|
|
enabled(3) -- startup the router
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the OSPF routing
|
||
|
|
protocol. enabled(3) causes OSPF to become active
|
||
|
|
on any IP configured router ports. disabled(2) causes
|
||
|
|
OSPF to perform a graceful shutdown on any active IP
|
||
|
|
configured router ports."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpOspfConfig 1 }
|
||
|
|
|
||
|
|
nwIpOspfOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5) -- start-up in progress
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current operating condition of OSPF."
|
||
|
|
::= { nwIpOspfConfig 2 }
|
||
|
|
|
||
|
|
nwIpOspfAdminReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
reset(2) -- force a reset
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets OSPF. reset(2) will force a restart of OSPF
|
||
|
|
on any active IP router ports, configured for OSPF,
|
||
|
|
without a graceful shutdown, without affecting any
|
||
|
|
other routing services."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpOspfConfig 3 }
|
||
|
|
|
||
|
|
nwIpOspfOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time (#of time ticks) that OSPF
|
||
|
|
has been in its current operational state."
|
||
|
|
::= { nwIpOspfConfig 4 }
|
||
|
|
|
||
|
|
nwIpOspfVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current Cabletron revision level of OSPF
|
||
|
|
in textual format, not the OSPF version supported."
|
||
|
|
::= { nwIpOspfConfig 5 }
|
||
|
|
|
||
|
|
nwIpOspfStackSize OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the stack size for the OSPF thread. In order
|
||
|
|
for a change of this value to take effect, OSPF
|
||
|
|
(nwIpOspfAdminStatus), IP (nwIpSysAdminStatus), or the
|
||
|
|
device itself must be reset."
|
||
|
|
DEFVAL { 50000 }
|
||
|
|
::= { nwIpOspfConfig 6 }
|
||
|
|
|
||
|
|
nwIpOspfThreadPriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the run-time execution priority of the OSPF
|
||
|
|
protocol thread. In order for a change of this value to
|
||
|
|
take effect, OSPF or the IP routing services, or the
|
||
|
|
device must be reset."
|
||
|
|
DEFVAL { 127 }
|
||
|
|
::= { nwIpOspfConfig 7 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP OSPF System (aggregate) Counters
|
||
|
|
-- This group contains the aggregate (device-wide) IP OSPF packet and
|
||
|
|
-- byte counters.
|
||
|
|
|
||
|
|
nwIpOspfCtrAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the operating condition of the aggregate
|
||
|
|
(device-wide) OSPF packet and byte counters. enable (3)
|
||
|
|
causes these counters to become active on any router ports
|
||
|
|
running OSPF. disabled (2) cause these counters to become
|
||
|
|
inactive on any router port running OSPF."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpOspfCounters 1 }
|
||
|
|
|
||
|
|
nwIpOspfCtrReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the aggregate (device-wide) OSPF packet and byte
|
||
|
|
counters. reset(2) resets the aggregate OSPF counters to 0
|
||
|
|
and nwIpOspfCtrOperationalTime to 0."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpOspfCounters 2 }
|
||
|
|
|
||
|
|
nwIpOspfCtrOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time (# of time ticks) that the
|
||
|
|
aggregate OSPF packet and byte counters have been active."
|
||
|
|
::= { nwIpOspfCounters 3 }
|
||
|
|
|
||
|
|
nwIpOspfCtrInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
received, device-wide, during nwIpOspfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfCounters 4 }
|
||
|
|
|
||
|
|
nwIpOspfCtrOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
transmitted, device-wide, during nwIpOspfCtr-
|
||
|
|
Operational-Time."
|
||
|
|
::= { nwIpOspfCounters 5 }
|
||
|
|
|
||
|
|
nwIpOspfCtrFilteredPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
administratively filtered, device-wide, during
|
||
|
|
nwIpOspfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfCounters 6 }
|
||
|
|
|
||
|
|
nwIpOspfCtrDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
discarded, device-wide, during nwIpOspfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfCounters 7 }
|
||
|
|
|
||
|
|
nwIpOspfCtrInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSFP packets
|
||
|
|
that have been received, device-wide, during
|
||
|
|
nwIpOspfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfCounters 8 }
|
||
|
|
|
||
|
|
nwIpOspfCtrOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSPF packets
|
||
|
|
that have been transmitted, device-wide, during
|
||
|
|
nwIpOspfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfCounters 9 }
|
||
|
|
|
||
|
|
nwIpOspfCtrFilteredBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSPF packets
|
||
|
|
that have been administratively filtered, device-wide,
|
||
|
|
during nwIpOspfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfCounters 10 }
|
||
|
|
|
||
|
|
nwIpOspfCtrDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSPF packets
|
||
|
|
that have been discarded, during
|
||
|
|
nwIpOspfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfCounters 11 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP OSPF Interface Table
|
||
|
|
-- This group, as well as MIB-II OSPF, contains the managed objects used to
|
||
|
|
-- setup and configure OSPF on a per router port basis.
|
||
|
|
|
||
|
|
nwIpOspfIfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpOspfIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the OSPF configuration information for
|
||
|
|
each IP router port"
|
||
|
|
::= { nwIpOspfIfConfig 1 }
|
||
|
|
|
||
|
|
nwIpOspfIfEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpOspfIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the OSPF configuration information
|
||
|
|
for the IP router port for which the entry exists."
|
||
|
|
INDEX { nwIpOspfIfIndex }
|
||
|
|
::= { nwIpOspfIfTable 1 }
|
||
|
|
|
||
|
|
NwIpOspfIfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpOspfIfIndex INTEGER,
|
||
|
|
nwIpOspfIfAdminStatus INTEGER,
|
||
|
|
nwIpOspfIfOperStatus INTEGER,
|
||
|
|
nwIpOspfIfOperationalTime TimeTicks,
|
||
|
|
nwIpOspfIfVersion INTEGER,
|
||
|
|
nwIpOspfIfSnooping INTEGER,
|
||
|
|
nwIpOspfIfType INTEGER,
|
||
|
|
nwIpOspfIfAclIdentifier INTEGER,
|
||
|
|
nwIpOspfIfAclStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpOspfIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the primary index into the OSPF interface table.
|
||
|
|
This number corresponds to the index into the MIB-2
|
||
|
|
Interface Table which describes the router port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpOspfIfEntry 1 }
|
||
|
|
|
||
|
|
nwIpOspfIfAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of OSPF on the IP router
|
||
|
|
port for which the entry exists. enabled(3)
|
||
|
|
causes OSPF to become active on the router port.
|
||
|
|
disabled(2) causes OSPF to become inactive on the
|
||
|
|
router port."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpOspfIfEntry 2 }
|
||
|
|
|
||
|
|
nwIpOspfIfOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5) -- start-up in progress
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of OSPF on the IP
|
||
|
|
router port for which the entry exists. enabled(3)
|
||
|
|
causes OSPF to become active on the router port.
|
||
|
|
disabled(2) causes OSPF to become inactive on the
|
||
|
|
router port."
|
||
|
|
::= { nwIpOspfIfEntry 3 }
|
||
|
|
|
||
|
|
nwIpOspfIfOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that nwIpOspfIfAdminStatus has been in its current state."
|
||
|
|
::= { nwIpOspfIfEntry 4 }
|
||
|
|
|
||
|
|
nwIpOspfIfVersion OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the OSPF protocol revision level supported on
|
||
|
|
the router port."
|
||
|
|
DEFVAL { 1 }
|
||
|
|
::= { nwIpOspfIfEntry 5 }
|
||
|
|
|
||
|
|
nwIpOspfIfSnooping OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the operation of OSPF Snooping on the IP
|
||
|
|
router port for which the entry exists.OSPF
|
||
|
|
Snooping is operating OSPF in passive mode, so it receives
|
||
|
|
route information, builds and maintains a route
|
||
|
|
information table, but does not advertise. enable (3)
|
||
|
|
turns on OSPF Snooping. disable (2) turns it off."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpOspfIfEntry 6 }
|
||
|
|
|
||
|
|
nwIpOspfIfType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
bma(2),
|
||
|
|
nbma(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies whether the attached network segment does or
|
||
|
|
does not support broadcast media access. bma (2) indicates
|
||
|
|
that route advertisements can be sent as broadcasts. nbma
|
||
|
|
(3) indicates that route advertisements must be addresses
|
||
|
|
directly to each neighbor."
|
||
|
|
DEFVAL { bma }
|
||
|
|
::= { nwIpOspfIfEntry 7 }
|
||
|
|
|
||
|
|
nwIpOspfIfAclIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the Access Control List ID of the access
|
||
|
|
control list applied to OSPF traffic on the IP router
|
||
|
|
port for which the entry exists. A value of
|
||
|
|
0 indicates that no Access List applies."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { nwIpOspfIfEntry 8 }
|
||
|
|
|
||
|
|
nwIpOspfIfAclStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the operation of the access list configured for
|
||
|
|
OSPF traffic on the IP router port for which the entry exists.
|
||
|
|
enabled(3) causes the access list to be applied. disabled(2)
|
||
|
|
causes the access list not to be applied."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpOspfIfEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP OSPF Interface Counters Table
|
||
|
|
-- This table contains the objects that specify the packet and byte counters
|
||
|
|
-- for each configured IP OSPF router port.
|
||
|
|
|
||
|
|
nwIpOspfIfCtrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpOspfIfCtrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the OSPF packet and byte counter for
|
||
|
|
each configured OSPF router port."
|
||
|
|
::= { nwIpOspfIfCounters 1 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpOspfIfCtrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the OSPF packet and byte counter for
|
||
|
|
for the router for which the entry exists."
|
||
|
|
INDEX { nwIpOspfIfCtrIfIndex }
|
||
|
|
::= { nwIpOspfIfCtrTable 1 }
|
||
|
|
|
||
|
|
NwIpOspfIfCtrEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpOspfIfCtrIfIndex INTEGER,
|
||
|
|
nwIpOspfIfCtrAdminStatus INTEGER,
|
||
|
|
nwIpOspfIfCtrReset INTEGER,
|
||
|
|
nwIpOspfIfCtrOperationalTime TimeTicks,
|
||
|
|
nwIpOspfIfCtrInPkts Counter,
|
||
|
|
nwIpOspfIfCtrOutPkts Counter,
|
||
|
|
nwIpOspfIfCtrFilteredPkts Counter,
|
||
|
|
nwIpOspfIfCtrDiscardPkts Counter,
|
||
|
|
nwIpOspfIfCtrInBytes Counter,
|
||
|
|
nwIpOspfIfCtrOutBytes Counter,
|
||
|
|
nwIpOspfIfCtrFilteredBytes Counter,
|
||
|
|
nwIpOspfIfCtrDiscardBytes Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpOspfIfCtrIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the primary index into the OSPF interface counter
|
||
|
|
table. This number corresponds to the index into the MIB-2
|
||
|
|
Interface Table which describes the router port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpOspfIfCtrEntry 1 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the OSPF packet and byte
|
||
|
|
counters on the IP router port for which
|
||
|
|
the entry exists. enabled(3) causes these counters to
|
||
|
|
become active on the router port. disabled(2) turns these
|
||
|
|
counters off."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpOspfIfCtrEntry 2 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the OSPF packet and byte counters on the router port
|
||
|
|
for which the entry exists. reset (2) resets the
|
||
|
|
interface-specific counters to 0 and
|
||
|
|
nwIpOspfIfCtrOperationalTime to 0."
|
||
|
|
DEFVAL { other }
|
||
|
|
::= { nwIpOspfIfCtrEntry 3 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time (# of time ticks) that the
|
||
|
|
interface-specific OSPF packet and byte counters have
|
||
|
|
been active on the router port for which the entry
|
||
|
|
exists."
|
||
|
|
::= { nwIpOspfIfCtrEntry 4 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
received, on the router port for which the entry exists,
|
||
|
|
during nwIpOspfIfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfIfCtrEntry 5 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
transmitted, on the router port for which the entry exists,
|
||
|
|
during nwIpOspfIfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfIfCtrEntry 6 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrFilteredPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
administratively filtered, on the router port for which
|
||
|
|
the entry exists, during nwIpOspfIfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfIfCtrEntry 7 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of OSPF packets that have been
|
||
|
|
discarded, on the router port for which the entry exists,
|
||
|
|
during nwIpOspfIfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfIfCtrEntry 8 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrInBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSPF packets
|
||
|
|
that have been received, on the router port for
|
||
|
|
which the entry exists, during
|
||
|
|
nwIpOspfIfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfIfCtrEntry 9 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrOutBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSPF packets
|
||
|
|
that have been transmitted, on the router port for which the
|
||
|
|
entry exists, during nwIpOspfIfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfIfCtrEntry 10 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrFilteredBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSPF packets
|
||
|
|
that have been administratively filtered, on the
|
||
|
|
router port for which the entry exists, during
|
||
|
|
nwIpOspfIfCtrOperationalTime"
|
||
|
|
::= { nwIpOspfIfCtrEntry 11 }
|
||
|
|
|
||
|
|
nwIpOspfIfCtrDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the OSPF packets
|
||
|
|
that have been discarded, on the router port for which the
|
||
|
|
entry exists, during nwIpOspfIfCtrOperationalTime."
|
||
|
|
::= { nwIpOspfIfCtrEntry 12 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Forward Information Base (FIB) System Group
|
||
|
|
|
||
|
|
-- The nwIpFibSystem group provides a way to prioritize static routes or
|
||
|
|
-- routes learned from RIP or OSPF. Note, the IETF IP Forwarding Table
|
||
|
|
-- leaf ipForwardProto maps the value (3) netmgmt and (2) local to
|
||
|
|
-- staticRoutePriority. Lets say the FIB table holds two routes to the
|
||
|
|
-- same destination. If the first route has leaf ipForwardProto equal to
|
||
|
|
-- (3), a static route set by mgmnt, and the second route has say (13),
|
||
|
|
-- an OSPF route, then the static route will be the one taken in a next
|
||
|
|
-- hop lookup in the FIB, because static routes have higher priority than
|
||
|
|
-- OSPF routes. The following leafs are necessary because metrics cannot
|
||
|
|
-- be compared across routes from different sources.
|
||
|
|
|
||
|
|
nwIpRipRoutePriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the route priority assigned to routes learned by the
|
||
|
|
RIP routing protocol."
|
||
|
|
DEFVAL { 16 }
|
||
|
|
::= { nwIpFibSystem 1 }
|
||
|
|
|
||
|
|
nwIpOSPFRoutePriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the route priority assigned to routes learned by the
|
||
|
|
OSPF routing protocol."
|
||
|
|
DEFVAL { 32 }
|
||
|
|
::= { nwIpFibSystem 2 }
|
||
|
|
|
||
|
|
nwIpStaticRoutePriority OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the route priority assigned to routes learned by
|
||
|
|
statically configured routes.."
|
||
|
|
DEFVAL { 48 }
|
||
|
|
::= { nwIpFibSystem 3 }
|
||
|
|
|
||
|
|
-- The Cabletron IP OSPF FIB control group
|
||
|
|
-- A list of objects controlling or identifying the number of entries
|
||
|
|
-- in the Cabletron IP OSPF FIB.
|
||
|
|
|
||
|
|
nwIpOspfForward OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of valid Cabletron IP OSPF FIB entries to
|
||
|
|
include static, dynamic, RIP and BGP4 type routes."
|
||
|
|
::= { nwIpOspfFibControl 1 }
|
||
|
|
|
||
|
|
nwIpOspfLeakAllStaticRoutes OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disabled (2), -- do not leak all static routes
|
||
|
|
enabled (1) -- leak all static routes
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Add all static routes in the IP FIB to the Cabletron IP OSPF FIB for
|
||
|
|
advertisement in OSPF routing protocol announcements."
|
||
|
|
::= { nwIpOspfFibControl 2 }
|
||
|
|
|
||
|
|
nwIpOspfLeakAllRipRoutes OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Add all RIP routes in the IP FIB to the Cabletron IP OSPF FIB for
|
||
|
|
advertisement in OSPF routing protocol announcements."
|
||
|
|
::= { nwIpOspfFibControl 3 }
|
||
|
|
|
||
|
|
nwIpOspfLeakAllBgp4Routes OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Add all BGP4 routes in the IP FIB to the Cabletron IP OSPF FIB for
|
||
|
|
advertisement in OSPF routing protocol announcements."
|
||
|
|
::= { nwIpOspfFibControl 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Cabletron IP OSPF FIB entries
|
||
|
|
|
||
|
|
nwIpOspfStaticTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpOspfStaticEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A table of statically configured entries in the Cabletron IP OSPF
|
||
|
|
FIB."
|
||
|
|
::= { nwIpOspfFibEntries 1 }
|
||
|
|
|
||
|
|
nwIpOspfStaticEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpOspfStaticEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of information for each static entry in the Cabletron
|
||
|
|
IP OSPF FIB."
|
||
|
|
INDEX { nwIpOspfStaticDest, nwIpOspfStaticForwardMask, nwIpOspfStaticNextHop }
|
||
|
|
::= { nwIpOspfStaticTable 1 }
|
||
|
|
|
||
|
|
NwIpOspfStaticEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpOspfStaticDest IpAddress,
|
||
|
|
nwIpOspfStaticForwardMask IpAddress,
|
||
|
|
nwIpOspfStaticNextHop IpAddress,
|
||
|
|
nwIpOspfStaticMetric INTEGER,
|
||
|
|
nwIpOspfStaticMetricType INTEGER,
|
||
|
|
nwIpOspfStaticStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpOspfStaticDest OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The network Address of a static route leaked from the IP FIB into the
|
||
|
|
Cabletron IP OSPF FIB."
|
||
|
|
::= { nwIpOspfStaticEntry 1 }
|
||
|
|
|
||
|
|
nwIpOspfStaticForwardMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The network mask of a static route leaked from the IP FIB into the
|
||
|
|
Cabletron IP OSPF FIB."
|
||
|
|
::= { nwIpOspfStaticEntry 2 }
|
||
|
|
|
||
|
|
nwIpOspfStaticNextHop OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The next hop address of a static route leaked from the IP FIB into the
|
||
|
|
Cabletron IP OSPF FIB. A value of 0.0.0.0 indicates that packets for
|
||
|
|
the external destination should be forwarded to the
|
||
|
|
advertising router."
|
||
|
|
::= { nwIpOspfStaticEntry 3 }
|
||
|
|
|
||
|
|
nwIpOspfStaticMetric OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Cabletron IP OSPF advertised cost of reaching the leaked static
|
||
|
|
route."
|
||
|
|
::= { nwIpOspfStaticEntry 4 }
|
||
|
|
|
||
|
|
nwIpOspfStaticMetricType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Cabletron IP OSPF metric type to be advertised using
|
||
|
|
OSPF: Autonomous System External type 1 (1) or Autonomous System
|
||
|
|
External type 2 (2)."
|
||
|
|
::= { nwIpOspfStaticEntry 5 }
|
||
|
|
|
||
|
|
nwIpOspfStaticStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
inactive (1), -- add the static route to the IP OSPF FIB
|
||
|
|
active (2), -- add and advertise the static route to the IP OSPF FIB
|
||
|
|
delete (3) -- delete the static route from the IP OSPF FIB
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"By setting this OID to inactive for a particular static route, the static
|
||
|
|
route will be added to the IP OSPF FIB but not advertised. Setting this
|
||
|
|
OID to active for a particular static route, the static route will be
|
||
|
|
advertised by the OSPF router. By setting this OID to delete for a
|
||
|
|
particular static route, the entry will no longer be advertised using
|
||
|
|
OSPF and will be deleted from the IP OSPF FIB."
|
||
|
|
::= { nwIpOspfStaticEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpOspfDynamicTable OBJECT IDENTIFIER
|
||
|
|
-- SYNTAX SEQUENCE OF NwIpOspfDynamicEntry
|
||
|
|
-- ACCESS not-accessible
|
||
|
|
-- STATUS optional
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The Cabletron IP OSPF FIB Dynamic entry table."
|
||
|
|
-- INDEX { nwIpOspfDynamicDest }
|
||
|
|
::= { nwIpOspfFibEntries 2 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpOspfRipTable OBJECT IDENTIFIER
|
||
|
|
-- SYNTAX SEQUENCE OF NwIpOspfRipEntry
|
||
|
|
-- ACCESS not-accessible
|
||
|
|
-- STATUS optional
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The Cabletron IP OSPF FIB RIP entry table."
|
||
|
|
-- INDEX { nwIpOspfRipDest }
|
||
|
|
::= { nwIpOspfFibEntries 3 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpOspfBgp4Table OBJECT IDENTIFIER
|
||
|
|
-- SYNTAX SEQUENCE OF NwIpOspfBgp4Entry
|
||
|
|
-- ACCESS not-accessible
|
||
|
|
-- STATUS optional
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "The Cabletron IP OSPF FIB BGP4 entry table."
|
||
|
|
-- INDEX { nwIpOspfBgp4Dest }
|
||
|
|
::= { nwIpOspfFibEntries 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Host Systems Group
|
||
|
|
|
||
|
|
nwIpHostsTimeToLive OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time (number of minutes) that an entry
|
||
|
|
can remain in the ARP cache."
|
||
|
|
::= { nwIpHostsSystem 1 }
|
||
|
|
|
||
|
|
nwIpHostsRetryCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the maximum number of times IP Routing Services
|
||
|
|
will retry each attempt to resolve a host address."
|
||
|
|
::= { nwIpHostsSystem 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Host Interfaces Table
|
||
|
|
-- This table contains the objects that specify the control information for
|
||
|
|
-- maintaining the ARP cache (IP Net-to-Media Table).
|
||
|
|
|
||
|
|
nwIpHostCtlTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpHostCtlEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the control information for maintaining
|
||
|
|
a cache of IP host addresses on each router port. Note that
|
||
|
|
the of actual entries are maintained by the IP Address
|
||
|
|
Translation Table (Net-to-Media) of MIB 2."
|
||
|
|
::= { nwIpHostsInterfaces 1 }
|
||
|
|
|
||
|
|
nwIpHostCtlEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpHostCtlEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the control information for
|
||
|
|
maintaining the cache on each router port."
|
||
|
|
INDEX { nwIpHostCtlIfIndex }
|
||
|
|
::= { nwIpHostCtlTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
NwIpHostCtlEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpHostCtlIfIndex INTEGER,
|
||
|
|
nwIpHostCtlAdminStatus INTEGER,
|
||
|
|
nwIpHostCtlOperStatus INTEGER,
|
||
|
|
nwIpHostCtlOperationalTime TimeTicks,
|
||
|
|
nwIpHostCtlProtocol INTEGER,
|
||
|
|
nwIpHostCtlSnooping INTEGER,
|
||
|
|
nwIpHostCtlProxy INTEGER,
|
||
|
|
nwIpHostCtlCacheMax INTEGER,
|
||
|
|
nwIpHostCtlCacheSize INTEGER,
|
||
|
|
nwIpHostCtlNumStatics Counter,
|
||
|
|
nwIpHostCtlNumDynamics Counter,
|
||
|
|
nwIpHostCtlCacheHits Counter,
|
||
|
|
nwIpHostCtlCacheMisses Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpHostCtlIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
||
|
|
the router port for which the entry exists."
|
||
|
|
::= { nwIpHostCtlEntry 1 }
|
||
|
|
|
||
|
|
nwIpHostCtlAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disable(2),
|
||
|
|
enable(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object does not apply to this protocol. It is a
|
||
|
|
common object, inherited from the MIB framework used to
|
||
|
|
provide a common management interface to all the Cabletron
|
||
|
|
Routing Services protocol specific MIBS. Setting this object
|
||
|
|
has no effect."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { nwIpHostCtlEntry 2 }
|
||
|
|
|
||
|
|
nwIpHostCtlOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5) -- start-up in progress
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current operating condition of the
|
||
|
|
IP Host Address cache on the router port for which the
|
||
|
|
entry exists."
|
||
|
|
::= { nwIpHostCtlEntry 3 }
|
||
|
|
|
||
|
|
nwIpHostCtlOperationalTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that nwIpHostCtlOperStatus has been in the current state."
|
||
|
|
::= { nwIpHostCtlEntry 4 }
|
||
|
|
|
||
|
|
nwIpHostCtlProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disable(2),
|
||
|
|
enable(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the operation of the ARP protocol on the router
|
||
|
|
port for which the entry exists."
|
||
|
|
DEFVAL { enable }
|
||
|
|
::= { nwIpHostCtlEntry 5 }
|
||
|
|
|
||
|
|
nwIpHostCtlSnooping OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disable(2),
|
||
|
|
enable(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls ARP Snooping on the router port for which
|
||
|
|
the entry exists. Given the ARP protocol is enabled,
|
||
|
|
nwIpHostCtlProtocol=3, setting nwIpHostCtlIfSnooping to
|
||
|
|
enabled (3) turns on ARP Snooping. When ARP Snooping is
|
||
|
|
enabled the source IP and physical addresses of all ARP
|
||
|
|
packets received on the router port are added to the MIB 2
|
||
|
|
Net-to-Media Table."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { nwIpHostCtlEntry 6 }
|
||
|
|
|
||
|
|
nwIpHostCtlProxy OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disable(2),
|
||
|
|
enable(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the operations of Proxy ARP on the router port
|
||
|
|
for which the entry exists. Given the ARP protocol is
|
||
|
|
enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlProxy to
|
||
|
|
enabled (3) turns on Proxy ARP. When Proxy ARP is enabled on
|
||
|
|
a router port, and an ARP request is received, requesting the
|
||
|
|
address for an IP host whose network address is listed on the
|
||
|
|
IP route table, then IP Routing Services sends a Proxy ARP
|
||
|
|
response, with the physical address of the receiving router
|
||
|
|
port in place of the requested host's physical address. Based
|
||
|
|
on this proxy response, the requesting host will then forward
|
||
|
|
packets to the router port, and IP Routing Services will then
|
||
|
|
forward them to the correct destination."
|
||
|
|
DEFVAL { disable }
|
||
|
|
::= { nwIpHostCtlEntry 7 }
|
||
|
|
|
||
|
|
nwIpHostCtlCacheMax OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the maximum number of entry slots the cache
|
||
|
|
can consist of. nwIpHostCtlCacheMax cannot be set to less
|
||
|
|
than 16. Setting this value does not allocate any memory for
|
||
|
|
the cache."
|
||
|
|
DEFVAL { 1024 }
|
||
|
|
::= { nwIpHostCtlEntry 8 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpHostCtlCacheSize OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current number of entry slots in the cache.
|
||
|
|
The cache automatically resizes to accommodate all entries
|
||
|
|
up to the maximum number of entries set by
|
||
|
|
nwIpHostCtlCacheMax."
|
||
|
|
::= { nwIpHostCtlEntry 9 }
|
||
|
|
|
||
|
|
nwIpHostCtlNumStatics OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of static entries in the cache
|
||
|
|
on the router port for which the entry exists. Static entries
|
||
|
|
remain in the cache until they are administratively removed."
|
||
|
|
::= { nwIpHostCtlEntry 10 }
|
||
|
|
|
||
|
|
nwIpHostCtlNumDynamics OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of dynamic entries in the cache on
|
||
|
|
the router port for which the entry exists. Dynamic entries
|
||
|
|
area added and aged out by the ARP protocol."
|
||
|
|
::= { nwIpHostCtlEntry 11 }
|
||
|
|
|
||
|
|
nwIpHostCtlCacheHits OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of times an entry in the cache has
|
||
|
|
been used to successfully provide the physical address
|
||
|
|
required to forward an IP packet on the router port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { nwIpHostCtlEntry 12 }
|
||
|
|
|
||
|
|
nwIpHostCtlCacheMisses OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of times the physical address
|
||
|
|
required to forward an IP packet has not been found in
|
||
|
|
the cache on the router port for which the entry exists."
|
||
|
|
::= { nwIpHostCtlEntry 13 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Hosts-to-Media Table
|
||
|
|
-- This table serves to supplement the MIB-2 Net-To-Media Table. It
|
||
|
|
-- supports both non-WAN interfaces and logical WAN interfaces and the
|
||
|
|
-- circuits under them. In addition to the ifIndex, IpAddress, and
|
||
|
|
-- PhysAddress mapping, each address translation includes the framing
|
||
|
|
-- required to converse with the host, the platform's logical port number,
|
||
|
|
-- and the circuit identifier associated with the mapping if applicable.
|
||
|
|
|
||
|
|
|
||
|
|
nwIpHostMapTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpHostMapEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Ip Address translation table used for mapping an IP
|
||
|
|
address to physical address, framing, port and circuit
|
||
|
|
identifier, if applicable."
|
||
|
|
::= { nwIpHostsToMedia 1 }
|
||
|
|
|
||
|
|
nwIpHostMapEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpHostMapEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains one IpAddress to 'physical'
|
||
|
|
address equivalence, including a circuit identifier
|
||
|
|
if applicable. Also provided is the framing and
|
||
|
|
port number required to converse with this host."
|
||
|
|
INDEX { nwIpHostMapIfIndex, nwIpHostMapIpAddr }
|
||
|
|
::= { nwIpHostMapTable 1 }
|
||
|
|
|
||
|
|
NwIpHostMapEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpHostMapIfIndex INTEGER,
|
||
|
|
nwIpHostMapIpAddr IpAddress,
|
||
|
|
nwIpHostMapPhysAddr PhysAddress,
|
||
|
|
nwIpHostMapType INTEGER,
|
||
|
|
nwIpHostMapCircuitID INTEGER,
|
||
|
|
nwIpHostMapFraming INTEGER,
|
||
|
|
nwIpHostMapPortNumber INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpHostMapIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the primary (major) index into the HostMap
|
||
|
|
table. This number corresponds to the index into the
|
||
|
|
MIB-2 Interfaces Group which describes the IP router
|
||
|
|
port for which the entry exists."
|
||
|
|
::= { nwIpHostMapEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpHostMapIpAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IpAddress corresponding to the media-dependent
|
||
|
|
'physical' address and circuit identifier (if applic)."
|
||
|
|
::= { nwIpHostMapEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpHostMapPhysAddr OBJECT-TYPE
|
||
|
|
SYNTAX PhysAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The media-dependent 'physical' address. The value of
|
||
|
|
this object is 0 for entries indicating native-wan(8)
|
||
|
|
framing."
|
||
|
|
::= { nwIpHostMapEntry 3 }
|
||
|
|
|
||
|
|
nwIpHostMapType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
invalid(2),
|
||
|
|
dynamic(3),
|
||
|
|
static(4),
|
||
|
|
inactive(5)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Setting this object to the value invalid(2) has
|
||
|
|
the effect of invalidating the corresponding entry
|
||
|
|
in the nwIpHostMapTable. That is, it effectively
|
||
|
|
dissasociates the circuit identified with said
|
||
|
|
entry from the mapping identified with said entry.
|
||
|
|
It is an implementation-specific matter as to
|
||
|
|
whether the agent removes an invalidated entry
|
||
|
|
from the table. Accordingly, management stations
|
||
|
|
must be prepared to receive tabular information
|
||
|
|
from agents that corresponds to entries not
|
||
|
|
currently in use. Proper interpretation of such
|
||
|
|
entries requires examination of the relevant
|
||
|
|
nwIpHostMapType object."
|
||
|
|
|
||
|
|
::= { nwIpHostMapEntry 4 }
|
||
|
|
|
||
|
|
nwIpHostMapCircuitID OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The identifier for the virtual circuit present on the
|
||
|
|
interface. On an interface configured for Frame Relay,
|
||
|
|
this number is the DLCI for the IP Address at the end of
|
||
|
|
the circuit. For non-WAN interfaces, the value of this
|
||
|
|
object is zero."
|
||
|
|
::= { nwIpHostMapEntry 5 }
|
||
|
|
|
||
|
|
nwIpHostMapFraming OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { -- valid media types
|
||
|
|
other(1), -- experimental
|
||
|
|
ethernet(2), -- ethernet
|
||
|
|
snap(3), -- ethernet and fddi
|
||
|
|
slip(5), -- serial line
|
||
|
|
localtalk(7), -- internal SMB-1 only
|
||
|
|
nativewan(8), -- wan media types
|
||
|
|
encapenet(9), -- wan media types
|
||
|
|
encapenetsnap(11), -- wan media types
|
||
|
|
encaptrsnap(14), -- wan media types
|
||
|
|
encapfddisnap(16), -- wan media types
|
||
|
|
canonical(17) -- special media, tbd
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the framing type required to converse with the
|
||
|
|
host for which this entry exists."
|
||
|
|
::= { nwIpHostMapEntry 6 }
|
||
|
|
|
||
|
|
nwIpHostMapPortNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The unique value for the logical port number. It's value
|
||
|
|
ranges between 1 and a maximum value which is dependent on
|
||
|
|
both the number of interfaces in the system and the number
|
||
|
|
of circuits present on interfaces which are of WAN type."
|
||
|
|
::= { nwIpHostMapEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Access Control List Table
|
||
|
|
|
||
|
|
-- Implementation of the nwIpAccessControl group is optional. This group
|
||
|
|
-- will be implemented for devices that provide Routing Services.
|
||
|
|
-- This table contains the managed objects for the Access Control Lists
|
||
|
|
-- within the IP Router. Access Control Lists allow configuration of
|
||
|
|
-- restricted access to networks and protocols reachable thru the IP
|
||
|
|
-- Router device. Access Control Lists can be defined with these
|
||
|
|
-- objects and then be independently applied to IP forwarding router ports.
|
||
|
|
|
||
|
|
nwIpAclValidEntries OBJECT-TYPE
|
||
|
|
SYNTAX Gauge
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of valid entries that exist in the
|
||
|
|
access control list table."
|
||
|
|
::= { nwIpAccessControl 1 }
|
||
|
|
|
||
|
|
nwIpAclTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpAclEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the access control list information
|
||
|
|
for IP traffic. This table contains entries, each of which
|
||
|
|
allows packet forwarding between source/destination pairs to
|
||
|
|
be permitted or denied. The list is identified by the Access
|
||
|
|
Control List ID. Each list may contain multiple entries
|
||
|
|
ordered by sequence number. When an access control list is
|
||
|
|
searched, it is searched in sequence number order and the
|
||
|
|
first match found ends the search. If no match is found,
|
||
|
|
access defaults to permitted."
|
||
|
|
::= { nwIpAccessControl 2 }
|
||
|
|
|
||
|
|
nwIpAclEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpAclEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains IP source/destination access information."
|
||
|
|
INDEX { nwIpAclIdentifier, nwIpAclSequence }
|
||
|
|
::= { nwIpAclTable 1 }
|
||
|
|
|
||
|
|
NwIpAclEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpAclIdentifier INTEGER,
|
||
|
|
nwIpAclSequence INTEGER,
|
||
|
|
nwIpAclPermission INTEGER,
|
||
|
|
nwIpAclMatches Counter,
|
||
|
|
nwIpAclDestAddress IpAddress,
|
||
|
|
nwIpAclDestMask IpAddress,
|
||
|
|
nwIpAclSrcAddress IpAddress,
|
||
|
|
nwIpAclSrcMask IpAddress,
|
||
|
|
nwIpAclProtocol INTEGER,
|
||
|
|
nwIpAclPortNumber INTEGER
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpAclIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the primary (major) index into the IP access
|
||
|
|
control list table. This value identifies the access control
|
||
|
|
list by a unique identifier arbitrarily assigned by the user.
|
||
|
|
All entries that have the same value for nwIpAclIdentifier
|
||
|
|
belong to the same access control list."
|
||
|
|
::= { nwIpAclEntry 1 }
|
||
|
|
|
||
|
|
nwIpAclSequence OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the secondary (minor) index into the IP access
|
||
|
|
control list table. This number corresponds to a sequence
|
||
|
|
number used to order multiple entries within the same access
|
||
|
|
control list."
|
||
|
|
::= { nwIpAclEntry 2 }
|
||
|
|
|
||
|
|
nwIpAclPermission OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
invalid(2),
|
||
|
|
permit(3),
|
||
|
|
deny(4),
|
||
|
|
permit-bidirectional(5),
|
||
|
|
deny-bidirectional(6)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies whether access is allowed or denied between
|
||
|
|
the source and destination address pair. Note that source
|
||
|
|
and destination are interchangeable when bi-directional
|
||
|
|
control is selected. To remove an existing entry set
|
||
|
|
nwIpAclPermission to invalid (2). Invalid entries disappear
|
||
|
|
after reboot."
|
||
|
|
DEFVAL { permit }
|
||
|
|
::= { nwIpAclEntry 3 }
|
||
|
|
|
||
|
|
nwIpAclMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the number of matches on this entry that have
|
||
|
|
resulted in the permit/deny access restriction being
|
||
|
|
applied as part of the forwarding process."
|
||
|
|
::= { nwIpAclEntry 4 }
|
||
|
|
|
||
|
|
nwIpAclDestAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the destination IP address used to compare
|
||
|
|
for matches on the access control list."
|
||
|
|
::= { nwIpAclEntry 5 }
|
||
|
|
|
||
|
|
nwIpAclDestMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the mask to be applied to the destination address
|
||
|
|
to determine the portion of the address used to compare for
|
||
|
|
matches on the access control list. Only bits that are
|
||
|
|
matching are used in the comparison. This allows for
|
||
|
|
wild-carding and partial matching."
|
||
|
|
::= { nwIpAclEntry 6 }
|
||
|
|
|
||
|
|
nwIpAclSrcAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the source address used to compare for
|
||
|
|
matches on the access control list."
|
||
|
|
::= { nwIpAclEntry 7 }
|
||
|
|
|
||
|
|
nwIpAclSrcMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the mask to be applied to the source address
|
||
|
|
to determine the portion of the address to be used to compare
|
||
|
|
for matches on the access control list. Only bits that are
|
||
|
|
matching are used in the comparison. This allows for
|
||
|
|
wild-carding and partial matching."
|
||
|
|
::= { nwIpAclEntry 8 }
|
||
|
|
|
||
|
|
nwIpAclProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
all(2), -- all ip packets
|
||
|
|
icmp(3), -- icmp packets only
|
||
|
|
udp(4), -- udp packets only
|
||
|
|
tcp(5) -- tcp packets only
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the IP protocols checked to compare for matches
|
||
|
|
on the access control list."
|
||
|
|
DEFVAL { all }
|
||
|
|
::= { nwIpAclEntry 9 }
|
||
|
|
|
||
|
|
nwIpAclPortNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the port number used to compare for matches on
|
||
|
|
the access control list. nwIpAclPortNumber only applies
|
||
|
|
if nwIpAclProtocol is equal to 4 or 5, UDP or TCP
|
||
|
|
nwIpAclPortNumber ranges from 0 to 65536. The value 0 is
|
||
|
|
a wildcard which matches any port."
|
||
|
|
::= { nwIpAclEntry 10 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Redirector Table
|
||
|
|
|
||
|
|
-- The Redirector allows UDP broadcast packets that would normally be
|
||
|
|
-- discarded by the Router to be forwarded (or redirected) to a
|
||
|
|
-- specific (non-broadcast) IP address.
|
||
|
|
|
||
|
|
nwIpRedirectTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpRedirectEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each UDP port configured
|
||
|
|
for UDP broadcast redirection."
|
||
|
|
::= { nwIpRedirectorSystem 1 }
|
||
|
|
|
||
|
|
nwIpRedirectEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpRedirectEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the UDP port number of and IP Address
|
||
|
|
to which UDP packets received as LAN broadcasts, should be
|
||
|
|
redirected."
|
||
|
|
INDEX { nwIpRedirectPort }
|
||
|
|
::= { nwIpRedirectTable 1 }
|
||
|
|
|
||
|
|
NwIpRedirectEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpRedirectPort INTEGER,
|
||
|
|
nwIpRedirectAddress IpAddress,
|
||
|
|
nwIpRedirectType INTEGER,
|
||
|
|
nwIpRedirectCount Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpRedirectPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the primary index into the UDP redirector table,
|
||
|
|
identifying the UDP port number of the packets that will
|
||
|
|
be redirected."
|
||
|
|
::= { nwIpRedirectEntry 1 }
|
||
|
|
|
||
|
|
nwIpRedirectAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the IP address to which the UDP broadcast packets
|
||
|
|
matching the UDP redirect port value (nwIpRedirectPort)
|
||
|
|
will be forwarded."
|
||
|
|
::= { nwIpRedirectEntry 2 }
|
||
|
|
|
||
|
|
nwIpRedirectType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
forward(1),
|
||
|
|
delete(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Set this object to enable or disable the redirector
|
||
|
|
feature for the UDP port specified by nwIpRedirectAddress."
|
||
|
|
DEFVAL { forward }
|
||
|
|
::= { nwIpRedirectEntry 3 }
|
||
|
|
|
||
|
|
nwIpRedirectCount OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates how many UDP broadcast packets have been
|
||
|
|
redirected, as specified by this entry."
|
||
|
|
::= { nwIpRedirectEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Event Group
|
||
|
|
|
||
|
|
nwIpEventAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of IP event logging.
|
||
|
|
enabled(3) causes the event log to become active.
|
||
|
|
disabled(2) causes the event log to become inactive."
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { nwIpEventLogConfig 1 }
|
||
|
|
|
||
|
|
nwIpEventMaxEntries OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of IP event logging.
|
||
|
|
Enabled (3) causes the event log to become active.
|
||
|
|
Disabled (2) causes the event log to become inactive."
|
||
|
|
DEFVAL { 100 }
|
||
|
|
::= { nwIpEventLogConfig 2 }
|
||
|
|
|
||
|
|
nwIpEventTraceAll OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following,
|
||
|
|
disabled(2), -- disable IP event logging,
|
||
|
|
enabled(3) -- enable IP event logging
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Enabled (3) allows logging of all event types on all
|
||
|
|
router ports for all protocols and components.
|
||
|
|
Disabled (2) causes the filter table to specify which events
|
||
|
|
to log."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpEventLogConfig 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Event Log Filter Table
|
||
|
|
-- The Event Log Filter Table contains the managed objects used to set-up
|
||
|
|
-- and configure log entries.
|
||
|
|
|
||
|
|
nwIpEventFilterTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpEventFilterEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each event filter
|
||
|
|
configured for IP Routing Services events."
|
||
|
|
::= { nwIpEventLogFilterTable 1 }
|
||
|
|
|
||
|
|
nwIpEventFilterEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpEventFilterEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry describes an event filter which defines
|
||
|
|
a particular type of event to be logged to the event log.
|
||
|
|
The value of nwIpEventProtocol indicates the value used
|
||
|
|
in either the nwRtgProtocolTable or the nwComponentTable
|
||
|
|
in the Cabletron Routing Services MIB, which identifies
|
||
|
|
the protocol to which the entry exists."
|
||
|
|
INDEX { nwIpEventFltrProtocol, nwIpEventFltrIfNum }
|
||
|
|
::= { nwIpEventFilterTable 1 }
|
||
|
|
|
||
|
|
NwIpEventFilterEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpEventFltrProtocol INTEGER,
|
||
|
|
nwIpEventFltrIfNum INTEGER,
|
||
|
|
nwIpEventFltrControl INTEGER,
|
||
|
|
nwIpEventFltrType INTEGER,
|
||
|
|
nwIpEventFltrSeverity INTEGER,
|
||
|
|
nwIpEventFltrAction INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpEventFltrProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of the Cabletron Routing Services
|
||
|
|
MIB nwRtgProtocolInstance or nwComponentRtgInstance
|
||
|
|
which identifies the protocol involved in the event for
|
||
|
|
which the event filter exists."
|
||
|
|
::= { nwIpEventFilterEntry 1 }
|
||
|
|
|
||
|
|
nwIpEventFltrIfNum OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the router port involved in the event for
|
||
|
|
which the event filter exists."
|
||
|
|
::= { nwIpEventFilterEntry 2 }
|
||
|
|
|
||
|
|
nwIpEventFltrControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
delete(2),
|
||
|
|
add(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Set this value to 3 to add the entry to the event
|
||
|
|
filter table. Set this value to 2 to remove the entry
|
||
|
|
from the event filter table."
|
||
|
|
DEFVAL { add }
|
||
|
|
::= { nwIpEventFilterEntry 3 }
|
||
|
|
|
||
|
|
nwIpEventFltrType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
misc(1),
|
||
|
|
timer(2),
|
||
|
|
rcv(4),
|
||
|
|
xmit(8),
|
||
|
|
event(16),
|
||
|
|
diags(32),
|
||
|
|
error(64)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This 6 bit mask specifies the types of events to
|
||
|
|
be logged. By default all 6 bits are set to 1,
|
||
|
|
indicating that all types of events are to be logged.
|
||
|
|
Setting any bit to 0 removes an event type from this field
|
||
|
|
and prevents that type of event from being logged.Setting
|
||
|
|
any bit to 1 adds an event type to this field and enables
|
||
|
|
that type of event to be logged. "
|
||
|
|
DEFVAL { error }
|
||
|
|
::= { nwIpEventFilterEntry 4 }
|
||
|
|
|
||
|
|
nwIpEventFltrSeverity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
highest(1),
|
||
|
|
highmed(2),
|
||
|
|
highlow(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the level of severity an event must meet
|
||
|
|
in order to be logged. Controls the amount of event
|
||
|
|
logging by ignoring events of a lower priority than
|
||
|
|
specified by this filter value. `Highmed' ignores only
|
||
|
|
events of the lowest severity. `Highlow' logs all events
|
||
|
|
highest priority through lowest. `Highest' severity causes
|
||
|
|
all events except those of the highest severity to be
|
||
|
|
ignored. `Highmed' severity is the default setting which
|
||
|
|
causes only events of the lowest severity to be ignored.
|
||
|
|
`Highlow' severity logs all events, regardless of severity."
|
||
|
|
DEFVAL { highest }
|
||
|
|
::= { nwIpEventFilterEntry 5 }
|
||
|
|
|
||
|
|
nwIpEventFltrAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
log(1),
|
||
|
|
trap(2),
|
||
|
|
log-trap(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies how the events are to be logged. Logging to the
|
||
|
|
`log' stores the events in the event log table
|
||
|
|
(nwIpEventFltrAction). Logging to `trap' sends events out
|
||
|
|
through the trap mechanism."
|
||
|
|
DEFVAL { log }
|
||
|
|
::= { nwIpEventFilterEntry 6 }
|
||
|
|
|
||
|
|
-- Event Log Table
|
||
|
|
-- The Event Log Table contains the logged events.
|
||
|
|
|
||
|
|
nwIpEventTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpEventEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each event that has
|
||
|
|
been logged."
|
||
|
|
::= { nwIpEventLogTable 1 }
|
||
|
|
|
||
|
|
nwIpEventEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpEventEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the information about an event
|
||
|
|
that has been logged to the event table."
|
||
|
|
INDEX { nwIpEventNumber }
|
||
|
|
::= { nwIpEventTable 1 }
|
||
|
|
|
||
|
|
NwIpEventEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpEventNumber INTEGER,
|
||
|
|
nwIpEventTime TimeTicks,
|
||
|
|
nwIpEventType INTEGER,
|
||
|
|
nwIpEventSeverity INTEGER,
|
||
|
|
nwIpEventProtocol INTEGER,
|
||
|
|
nwIpEventIfNum INTEGER,
|
||
|
|
nwIpEventTextString OCTET STRING
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpEventNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An ordinal value assigned to the event for which the
|
||
|
|
log entry exists. nwIpEventNumber is assigned so that
|
||
|
|
each event in the event log can be uniquely identified
|
||
|
|
by the value of nwIpEventNumber."
|
||
|
|
::= { nwIpEventEntry 1 }
|
||
|
|
|
||
|
|
nwIpEventTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the time at which the event was logged to
|
||
|
|
the event log."
|
||
|
|
::= { nwIpEventEntry 2 }
|
||
|
|
|
||
|
|
nwIpEventType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
misc(1),
|
||
|
|
timer(2),
|
||
|
|
rcv(4),
|
||
|
|
xmit(8),
|
||
|
|
event(16),
|
||
|
|
diags(32),
|
||
|
|
error(64)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the type of event that was logged."
|
||
|
|
::= { nwIpEventEntry 3 }
|
||
|
|
|
||
|
|
nwIpEventSeverity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
highest(1),
|
||
|
|
highmed(2),
|
||
|
|
highlow(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the severity that was assigned to the event."
|
||
|
|
::= { nwIpEventEntry 4 }
|
||
|
|
|
||
|
|
nwIpEventProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the value of the Cabletron Routing Services
|
||
|
|
MIB nwRtgProtocolInstance or nwComponentInstance which
|
||
|
|
indentifies the protocol or component that was involved
|
||
|
|
in the event."
|
||
|
|
::= { nwIpEventEntry 5 }
|
||
|
|
|
||
|
|
nwIpEventIfNum OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the router port that was involved in the event."
|
||
|
|
::= { nwIpEventEntry 6 }
|
||
|
|
|
||
|
|
nwIpEventTextString OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Contains the actual text string that was logged."
|
||
|
|
::= { nwIpEventEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Work Group Group
|
||
|
|
|
||
|
|
-- This group contains the managed objects used to setup and configure the
|
||
|
|
-- IP router ports into associations known as workgroups. Each workgroup is
|
||
|
|
-- a subnet with one address and security level shared by the associated ports.
|
||
|
|
|
||
|
|
-- This group consists of four tables. The first three are configuration
|
||
|
|
-- tables and the fourth is a read-only status table:
|
||
|
|
|
||
|
|
-- Definition Table = entry defines a workgroup;
|
||
|
|
-- Interface Table = entry associates an interface (port) to a workgroup;
|
||
|
|
-- Range Table = entry locks a range of host addresses to a port
|
||
|
|
-- if the entry range is a single host address
|
||
|
|
-- it may also lock that host to a given physical address
|
||
|
|
-- Host Table = entry indicates a discovered host on the discovered port
|
||
|
|
-- with its discovered physical address
|
||
|
|
|
||
|
|
|
||
|
|
-- This group makes use of a Rowstatus textual convention.
|
||
|
|
|
||
|
|
-- Rowstatus is a status object used to administrate conceptual rows in the
|
||
|
|
-- IP Work Group tables defined below.
|
||
|
|
|
||
|
|
-- It is an integer used here in an SNMPv1 MIB but intended to have the same
|
||
|
|
-- semantics as the RowStatus textual convention for SNMPv2.
|
||
|
|
|
||
|
|
-- SYNTAX INTEGER {
|
||
|
|
-- active(1),
|
||
|
|
-- notInService(2),
|
||
|
|
-- notReady(3),
|
||
|
|
-- createAndGo(4),
|
||
|
|
-- createAndWait(5),
|
||
|
|
-- destroy(6)
|
||
|
|
-- }
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "Rowstatus is used to manage the creation and deletion of conceptual
|
||
|
|
-- rows, and is used as the value of the SYNTAX clause for the status
|
||
|
|
-- column of the row.
|
||
|
|
|
||
|
|
-- The status column has six defined values:
|
||
|
|
|
||
|
|
-- active = usable by the managed device;
|
||
|
|
-- notInService = unusable, row information complete;
|
||
|
|
-- notReady = unusable, row incomplete;
|
||
|
|
-- createAndGo = set to create a row in active status;
|
||
|
|
-- createAndWait = set to create a row in either
|
||
|
|
-- notReady or notInService status;
|
||
|
|
-- destroy = set to delete existing row;
|
||
|
|
|
||
|
|
-- The first three values are states which may be retrieved by a
|
||
|
|
-- management protocol get operation. The last three values are
|
||
|
|
-- actions - they may be written but not read. All values except
|
||
|
|
-- `notReady' may be specified in a set operation. For example
|
||
|
|
-- to temporarily disable a row, set status to `notInService' and
|
||
|
|
-- reactivate it later by a set to `active.' The agent alone
|
||
|
|
-- determines `notReady' status. If a row is created by a set of
|
||
|
|
-- `createAndWait' and the agent has enough row information from
|
||
|
|
-- instance and default values to complete the row, the status
|
||
|
|
-- will be set to `notInService' else to `notReady'."
|
||
|
|
--
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Work Group Definition Table
|
||
|
|
-- to define a workgroup
|
||
|
|
|
||
|
|
nwIpWgDefTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpWgDefEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table has an entry for each workgroup subnet definition.
|
||
|
|
It is indexed by and arbitrary integer indentifier."
|
||
|
|
::= { nwIpWorkGroup 1 }
|
||
|
|
|
||
|
|
nwIpWgDefEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpWgDefEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the configuration and status of an
|
||
|
|
individual work group."
|
||
|
|
INDEX { nwIpWgDefIdentifier }
|
||
|
|
::= { nwIpWgDefTable 1 }
|
||
|
|
|
||
|
|
NwIpWgDefEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpWgDefIdentifier INTEGER,
|
||
|
|
nwIpWgDefHostAddress IpAddress,
|
||
|
|
nwIpWgDefSubnetMask IpAddress,
|
||
|
|
nwIpWgDefSecurity INTEGER,
|
||
|
|
nwIpWgDefFastPath INTEGER,
|
||
|
|
nwIpWgDefRowStatus INTEGER,
|
||
|
|
nwIpWgDefOperStatus INTEGER,
|
||
|
|
nwIpWgDefNumActiveIntf INTEGER,
|
||
|
|
nwIpWgDefNumTotalIntf INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpWgDefIdentifier OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An index into the definition table, unique to each entry,
|
||
|
|
arbitrarily assigned by the user."
|
||
|
|
::= { nwIpWgDefEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgDefHostAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the IP router host which applies to every
|
||
|
|
interface included in the workgroup."
|
||
|
|
::= { nwIpWgDefEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgDefSubnetMask OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The subnet mask for the IP address above, thereby defining
|
||
|
|
the subnet which applies to every interface included in the
|
||
|
|
workgroup."
|
||
|
|
::= { nwIpWgDefEntry 3 }
|
||
|
|
|
||
|
|
nwIpWgDefSecurity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
low(2),
|
||
|
|
medium(3),
|
||
|
|
high(4)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A security level which applies to this workgroup as a whole.
|
||
|
|
Security applies in conjunction with the range table below,
|
||
|
|
which locks hosts to interfaces and/or physical address.
|
||
|
|
Packets are filtered out if security is violated.
|
||
|
|
|
||
|
|
For a high (4) security workgroup, a host must reside on the
|
||
|
|
interface and with the physical address configured in a range
|
||
|
|
table entry. For medium (3) security a host must reside on a
|
||
|
|
configured interface, but unless a physical address is also
|
||
|
|
specified in that range entry, the physical address is not
|
||
|
|
constrained. For low (2) security a host is free to reside
|
||
|
|
on any interface with any physical address if not configured
|
||
|
|
in the range table, but if configured must match a configured
|
||
|
|
entry. If security is none (1) the range table does not apply."
|
||
|
|
DEFVAL { low }
|
||
|
|
::= { nwIpWgDefEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgDefFastPath OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Enabled (3) provides a fast path for packets through the
|
||
|
|
router when both source and destination are within this
|
||
|
|
workgroup - done mostly by skipping IP header validation."
|
||
|
|
DEFVAL { enabled }
|
||
|
|
::= { nwIpWgDefEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgDefRowStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX Rowstatus textual convention above
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notInService(2),
|
||
|
|
notReady(3),
|
||
|
|
createAndGo(4),
|
||
|
|
createAndWait(5),
|
||
|
|
destroy(6)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This status instance does not support `createAndGo.'
|
||
|
|
A row entry should be created by a set of `createAndWait'
|
||
|
|
which brings the status to `notReady.' The missing row info
|
||
|
|
may then be supplied by setting nwIpWgDefHostAddr and
|
||
|
|
nwIpWgDefSubnetMask. If defaults are OK for nwIpWgDefFastPath
|
||
|
|
and nwIpWgDefSecurity this status instance may then be set to
|
||
|
|
`active' to activate the row."
|
||
|
|
DEFVAL { notReady }
|
||
|
|
::= { nwIpWgDefEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgDefOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ok(1),
|
||
|
|
disabled(2),
|
||
|
|
subnetConflict(3),
|
||
|
|
internalError(4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The operational status of this workgroup definition entry.
|
||
|
|
It will be `disabled' if this entry's row status is not active.
|
||
|
|
It will be `subnetConflict' if there is a conflict with an
|
||
|
|
existing active entry in this workgroup definition table."
|
||
|
|
::= { nwIpWgDefEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgDefNumActiveIntf OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of interfaces (ports) in this workgroup which
|
||
|
|
have an operational status nwIpWgIfOperStatus of `OK' in the
|
||
|
|
IP Work Group Interface table below."
|
||
|
|
::= { nwIpWgDefEntry 8 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgDefNumTotalIntf OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of interfaces (ports) in this workgroup which
|
||
|
|
have an administrative status nwIpWgIfRowStatus of `active'
|
||
|
|
in the IP Work Group Interface table below."
|
||
|
|
::= { nwIpWgDefEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Work Group Interface Table
|
||
|
|
-- to associate an interface (port) to a workgroup
|
||
|
|
|
||
|
|
nwIpWgIfTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpWgIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains an entry for each port in a workgroup.
|
||
|
|
It is indexed by the workgroup identifier and the MIB-II
|
||
|
|
interface indentifier."
|
||
|
|
::= { nwIpWorkGroup 2 }
|
||
|
|
|
||
|
|
nwIpWgIfEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpWgIfEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the association of a router port to
|
||
|
|
a defined workgroup."
|
||
|
|
INDEX { nwIpWgIfDefIdent, nwIpWgIfIfIndex }
|
||
|
|
::= { nwIpWgIfTable 1 }
|
||
|
|
|
||
|
|
NwIpWgIfEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpWgIfDefIdent INTEGER,
|
||
|
|
nwIpWgIfIfIndex INTEGER,
|
||
|
|
nwIpWgIfNumActiveHosts INTEGER,
|
||
|
|
nwIpWgIfNumKnownHosts Counter,
|
||
|
|
nwIpWgIfRowStatus INTEGER,
|
||
|
|
nwIpWgIfOperStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
nwIpWgIfDefIdent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The workgroup identifier. This is the primary index into
|
||
|
|
the IP Work Group Interface Table, matching the index into
|
||
|
|
the Definition Table above."
|
||
|
|
::= { nwIpWgIfEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgIfIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The interface number. This is the secondary index into the
|
||
|
|
IP Work Group Interface Table, matching the primary index
|
||
|
|
into the MIB-2 IfTable which describes the router port."
|
||
|
|
::= { nwIpWgIfEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgIfNumActiveHosts OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of hosts known to be active on this interface in
|
||
|
|
this workgroup. These hosts are visible in the IP Work Group
|
||
|
|
Host Table below. Hosts age out and become inactive in
|
||
|
|
approximately 10 minutes if not rediscovered thrugh ARP."
|
||
|
|
::= { nwIpWgIfEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgIfNumKnownHosts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of hosts seen on this interface in this workgroup
|
||
|
|
since this interface entry was last activated."
|
||
|
|
::= { nwIpWgIfEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgIfRowStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX Rowstatus textual convention above
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notInService(2),
|
||
|
|
notReady(3),
|
||
|
|
createAndGo(4),
|
||
|
|
createAndWait(5),
|
||
|
|
destroy(6)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This status instance supports `createAndGo' semantics
|
||
|
|
to create an active entry."
|
||
|
|
DEFVAL { notInService }
|
||
|
|
::= { nwIpWgIfEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgIfOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ok(1),
|
||
|
|
disabled(2),
|
||
|
|
workgroupInvalid(3),
|
||
|
|
addressConflict(4),
|
||
|
|
resetRequired(5),
|
||
|
|
linkDown(6),
|
||
|
|
routingDown(7),
|
||
|
|
internalError(8)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The operational status of this interface (port) entry.
|
||
|
|
It will be `disabled' if this entry's row status is not active.
|
||
|
|
It will be `workgroupInvalid' if either there is no workgroup
|
||
|
|
defined for this entry's nwIpWgIfDefIdent or if the operational
|
||
|
|
status for the workgroup in the definition table is not ok.
|
||
|
|
It will be `addressConflict' if an entry in nwIpAddressTable
|
||
|
|
is a conflict with the workgroup address of the definition.
|
||
|
|
If there is no conflict and this entry's row status has just
|
||
|
|
been activated, this operational status will be `resetRequired'.
|
||
|
|
It will be `linkDown' if there are no physical connections on
|
||
|
|
this interface and `routingDown' if routing or forwarding has
|
||
|
|
been adminstratively disabled. If unspecified internal problems
|
||
|
|
occur the status will be `internalError'."
|
||
|
|
::= { nwIpWgIfEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Router Work Group Range Table
|
||
|
|
-- to lock host ranges to an interface
|
||
|
|
-- and optionally lock to a physical address
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgRngTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpWgRngEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table locks ranges of IP hosts (addresses) to ports.
|
||
|
|
Entries in this table represent explicit permissions. The
|
||
|
|
host(s) represented by a range entry may exchange packets
|
||
|
|
with this router if it (they) match the port specified in the
|
||
|
|
entry. Optionally physical address may be locked as well.
|
||
|
|
|
||
|
|
This table functions in concert with the workgroup security
|
||
|
|
level as defined in the IP Work Group Definition Table entry.
|
||
|
|
For hosts not entered in this table the default for a low
|
||
|
|
security workgroup is to permit packet exchange, whereas the
|
||
|
|
default for medium and high security is to deny packet
|
||
|
|
exchange."
|
||
|
|
|
||
|
|
::= { nwIpWorkGroup 3 }
|
||
|
|
|
||
|
|
nwIpWgRngEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpWgRngEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry configures a range of host IP addresses to be
|
||
|
|
associated with a given interface ( port ). If the range
|
||
|
|
consists of a single host address the entry may optionally
|
||
|
|
specify a physical address. The entry is indexed by the range
|
||
|
|
and the port. Ranges may not overlap. However a range may be
|
||
|
|
duplicated on different ports.
|
||
|
|
|
||
|
|
The address range must lie within the subnet defined for a
|
||
|
|
given workgroup and thus the entry acquires the security
|
||
|
|
level of that workgroup. If security is violated, packets
|
||
|
|
to and from a given host IP address will be filtered out
|
||
|
|
passing through the router. The source and destination IP
|
||
|
|
packet addresses are checked against ranges in the range table
|
||
|
|
during packet forwarding and must match as follows:
|
||
|
|
|
||
|
|
For a high (4) security workgroup, a host must match a single
|
||
|
|
host range entry - it must reside on the port with the
|
||
|
|
physical address as configured in that entry.
|
||
|
|
|
||
|
|
For a medium (3) security workgroup, a host must match a range
|
||
|
|
entry in that it resides on that port, but unless a physical
|
||
|
|
address is also specified in that entry, the physical address
|
||
|
|
is not constrained.
|
||
|
|
|
||
|
|
For a low (2) security workgroup, a host is free to reside on
|
||
|
|
any port with any physical address as long as its IP address
|
||
|
|
does not lie within the range of any entry in the range table,
|
||
|
|
but if it does fall in a range then it must completely match
|
||
|
|
that entry, or another entry with the duplicate range. Match
|
||
|
|
completely means match the port and, if a physical address
|
||
|
|
is specified, match that as well."
|
||
|
|
|
||
|
|
INDEX { nwIpWgRngBegHostAddr, nwIpWgRngEndHostAddr, nwIpWgRngIfIndex }
|
||
|
|
::= { nwIpWgRngTable 1 }
|
||
|
|
|
||
|
|
NwIpWgRngEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpWgRngBegHostAddr IpAddress,
|
||
|
|
nwIpWgRngEndHostAddr IpAddress,
|
||
|
|
nwIpWgRngIfIndex INTEGER,
|
||
|
|
-- nwIpWgRngDefIdent INTEGER,
|
||
|
|
nwIpWgRngPhysAddr OCTET STRING,
|
||
|
|
nwIpWgRngRowStatus INTEGER,
|
||
|
|
nwIpWgRngOperStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgRngBegHostAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The beginning (lower) IP address of the address range.
|
||
|
|
This is the primary index into the IP Work Group Range Table."
|
||
|
|
::= { nwIpWgRngEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgRngEndHostAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The ending (higher) IP address of the address range.
|
||
|
|
This is the secondary index of the IP Work Group Range Table."
|
||
|
|
::= { nwIpWgRngEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgRngIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The interface number. This is the tertiary index into the
|
||
|
|
IP Work Group Interface Table, matching the primary index
|
||
|
|
into the MIB-2 IfTable which describes the router port."
|
||
|
|
::= { nwIpWgRngEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgRngPhysAddr OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The physical address of the host with the IP address given
|
||
|
|
in the nwIpWgRngBegHostAddr for this conceptual row entry.
|
||
|
|
Only single host range entry in which nwIpWgRngEndHostAddr is
|
||
|
|
the same as nwIpWgRngBegHostAddr may set a physical address."
|
||
|
|
DEFVAL { '000000000000'h }
|
||
|
|
::= { nwIpWgRngEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgRngRowStatus OBJECT-TYPE
|
||
|
|
-- SYNTAX Rowstatus textual convention above
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
notInService(2),
|
||
|
|
notReady(3),
|
||
|
|
createAndGo(4),
|
||
|
|
createAndWait(5),
|
||
|
|
destroy(6)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This status instance supports `createAndGo' semantics
|
||
|
|
to create an active entry."
|
||
|
|
DEFVAL { notInService }
|
||
|
|
::= { nwIpWgRngEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgRngOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ok(1),
|
||
|
|
disabled(2),
|
||
|
|
workgroupInvalid(3),
|
||
|
|
interfaceInvalid(4),
|
||
|
|
physAddrRequired(5),
|
||
|
|
internalError(6)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The operational status of this range table entry.
|
||
|
|
It will be `disabled' if this entry's row status is not active.
|
||
|
|
It will be `workgroupInvalid' if either there is no workgroup
|
||
|
|
or if the operational status for the workgroup in the definition
|
||
|
|
table associated with this address range is not ok.
|
||
|
|
It will be `interfaceInvalid' if this interface is not in
|
||
|
|
the workgroup interface table or if operational status of the
|
||
|
|
interface entry is not ok. It will be `physAddrRequired' if
|
||
|
|
the security level of the associated workgroup is high and
|
||
|
|
no physical address has been specified for this entry."
|
||
|
|
::= { nwIpWgRngEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- IP Work Group Host Table
|
||
|
|
-- to show status of hosts in workgroups
|
||
|
|
|
||
|
|
nwIpWgHostTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF NwIpWgHostEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A read only status table for hosts in workgroups.
|
||
|
|
It has the information similar to a net-to-media table."
|
||
|
|
::= { nwIpWorkGroup 4 }
|
||
|
|
|
||
|
|
nwIpWgHostEntry OBJECT-TYPE
|
||
|
|
SYNTAX NwIpWgHostEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry shows a workgroup host. Entry is indexed by
|
||
|
|
IP address and interface (port). It gives the workgroup
|
||
|
|
and the physical address found for the host."
|
||
|
|
INDEX { nwIpWgHostHostAddr, nwIpWgHostIfIndex }
|
||
|
|
::= { nwIpWgHostTable 1 }
|
||
|
|
|
||
|
|
NwIpWgHostEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
nwIpWgHostHostAddr IpAddress,
|
||
|
|
nwIpWgHostIfIndex INTEGER,
|
||
|
|
nwIpWgHostDefIdent INTEGER,
|
||
|
|
nwIpWgHostPhysAddr OCTET STRING,
|
||
|
|
nwIpWgHostStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgHostHostAddr OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The host IP address. This is the primary index to the
|
||
|
|
IP Work Group Host Table."
|
||
|
|
::= { nwIpWgHostEntry 1 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgHostIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The interface (port) number. This is the secondary index
|
||
|
|
to the IP Work Group Host Table, matching the primary index
|
||
|
|
to the MIB-2 IfTable which describes the router port."
|
||
|
|
::= { nwIpWgHostEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgHostDefIdent OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The workgroup identifier. This corresponds to the primary
|
||
|
|
index into the IP Work Group Interface Table."
|
||
|
|
::= { nwIpWgHostEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgHostPhysAddr OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The physical address of the host with the IP address given
|
||
|
|
in the nwIpWgHostHostAddr for this conceptual row entry."
|
||
|
|
::= { nwIpWgHostEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
nwIpWgHostStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
unknown(2),
|
||
|
|
valid(3),
|
||
|
|
invalid-multiple(4),
|
||
|
|
invalid-physaddr(5),
|
||
|
|
invalid-range(6),
|
||
|
|
invalid-interface(7),
|
||
|
|
invalid-workgroup(8),
|
||
|
|
invalid-expired(9)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This status of the host with respect to the workgroup.
|
||
|
|
|
||
|
|
The host may be `unknown' if ARP has not discovered on which
|
||
|
|
port it resides.
|
||
|
|
|
||
|
|
The status of `invalid-multiple' means the same host
|
||
|
|
IP address was later found duplicated on another port.
|
||
|
|
|
||
|
|
The status of `invalid-physaddr' means the host matched an
|
||
|
|
entry in the IP Work Group Range Table with respect to range
|
||
|
|
and port, but did not match that entry for physical address.
|
||
|
|
If the workgroup was high security this status would result
|
||
|
|
even if no physical address was given in the range entry.
|
||
|
|
|
||
|
|
The status of `invalid-range' could either mean that, in a high
|
||
|
|
or medium security workgroup, the host was not in the range of
|
||
|
|
any entry in the IP WORK GROUP Range Table, or that it was not
|
||
|
|
in the range of an entry with a matching port.
|
||
|
|
|
||
|
|
The status of `invalid-interface' could mean the port was
|
||
|
|
physically down or just not in service in the IP Work Group
|
||
|
|
Interface Table.
|
||
|
|
|
||
|
|
The status of `invalid-workgroup' could mean the workgroup
|
||
|
|
does not exist or is not in service in the IP Work Group
|
||
|
|
Definition Table.
|
||
|
|
|
||
|
|
The status of `invalid-expired' means the host became inactive
|
||
|
|
and aged out on the port on which it was learned."
|
||
|
|
|
||
|
|
::= { nwIpWgHostEntry 5 }
|
||
|
|
|
||
|
|
END
|