david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/enterasys/CTRON-REMOTE-ACCESS-MIB

3552 lines
135 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CTRON-REMOTE-ACCESS-MIB DEFINITIONS ::= BEGIN
-- ctron-remote-access-mib.txt The Cabletron Remote Access MIB.
-- Revision: 1.00.04
-- Part Number:
-- Date: November 24, 1998
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for part
-- of the naming tree below:
--
-- cabletron { enterprises 52 }
--
-- This module will be extended, as additional sub-sections
-- of this naming tree are defined.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 1997 Cabletron Systems
IMPORTS
IpAddress, Counter,enterprises FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212;
Index ::= INTEGER
DLCI ::= INTEGER
-- DisplayString ::= OCTET STRING
cabletron OBJECT IDENTIFIER ::= { enterprises 52 }
-- 1.3.6.1.4.1.52
mibs OBJECT IDENTIFIER ::= { cabletron 4 }
-- 1.3.6.1.4.1.52.4
ctron OBJECT IDENTIFIER ::= { mibs 1 }
-- 1.3.6.1.4.1.52.4.1
ctDataLink OBJECT IDENTIFIER ::= { ctron 2 }
-- 1.3.6.1.4.1.52.4.1.2
ctronWan OBJECT IDENTIFIER ::= { ctDataLink 7 }
-- 1.3.6.1.4.1.52.4.1.2.7
ctRemoteAccess OBJECT IDENTIFIER ::= { ctronWan 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2
----------------------------------------------------------
-- Groups
ctRemoteConnection OBJECT IDENTIFIER ::= { ctRemoteAccess 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1
ctDs1Ext OBJECT IDENTIFIER ::= { ctRemoteAccess 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2
ctRs232Ext OBJECT IDENTIFIER ::= { ctRemoteAccess 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3
ctFrDcp OBJECT IDENTIFIER ::= { ctRemoteAccess 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4
ctDDSExt OBJECT IDENTIFIER ::= { ctRemoteAccess 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5
ctPPPExt OBJECT IDENTIFIER ::= { ctRemoteAccess 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6
ctWanalyzer OBJECT IDENTIFIER ::= { ctRemoteAccess 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7
ctDs1Alarms OBJECT IDENTIFIER ::= { ctRemoteAccess 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8
ctIPPQFilters OBJECT IDENTIFIER ::= { ctRemoteAccess 9 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9
ctDs3Ext OBJECT IDENTIFIER ::= { ctRemoteAccess 10 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.10
-- Cabletron Remote Access Connection Group
-- This group is mandatory for all platforms that have one or more
-- physical remote access connections
ctRemNumConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object describes the number of physical remote
access connections on the platform."
::= { ctRemoteConnection 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.1
ctRemPhysPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtRemPhysPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the descriptions of the physical remote access
ports of this platform."
::= { ctRemoteConnection 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2
ctRemPhysPortEntry OBJECT-TYPE
SYNTAX CtRemPhysPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A physical port entry. It contains objects relating to a
given physical remote access port"
INDEX { ctRemConnectionIndex }
::= { ctRemPhysPortTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1
CtRemPhysPortEntry ::=
SEQUENCE {
ctRemConnectionIndex
INTEGER,
ctRemPhysPortType
INTEGER,
ctRemPhysPortSpecificMib
OBJECT IDENTIFIER,
ctRemPhysPortProtMgrType
INTEGER,
ctRemPhysPortProtMgrIfaceNum
INTEGER,
ctRemPhysPortWanIfaceNum
INTEGER,
ctRemPhysPortProtMgrMaxIfos
INTEGER,
ctRemPhysPortProtMgrIfaceList
DisplayString,
ctRemPhysAlarmTimeOut
INTEGER,
ctRemPhysWpimType
INTEGER
}
ctRemConnectionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value indicating the remote connection this entry
is located on."
::= { ctRemPhysPortEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.1
ctRemPhysPortType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
t1(2),
e1(3),
synchronous(4),
dds(5),
di(6), -- Drop and Insert
hdsl(7),
isdnBRI(8),
ds30(9),
t1dds(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of physical port that this entry describes. None
indicates that the physical port has no connector."
DEFVAL { none }
::= { ctRemPhysPortEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.2
ctRemPhysPortSpecificMib OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies an instance of the
index object in the first group of objects in the
MIB specific to the physical port."
::= { ctRemPhysPortEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.3
ctRemPhysPortProtMgrType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
pppNailedUp(2),
isdnPriPpp(3),
isdnBriPpp(4),
frameRelayPvcRtr(5),
frameRelayPvcSw(6),
hdlc(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies an instance of the type
of Protocol Manager residing on this physical
port. Before a physical port may be used, the type
of manager must be designated. For example, if the
physical port was going to be used as an ISDN PRI
interface, with dial up PPP links, then the manager
type would be set to (4), ISDN-PRI-PPP."
DEFVAL { none }
::= { ctRemPhysPortEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.4
ctRemPhysPortProtMgrIfaceNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the interface number that
will be assigned to the Protocol Managers IFO"
::= { ctRemPhysPortEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.5
ctRemPhysPortWanIfaceNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the interface number that
will be assigned to the Wanio's IFO"
::= { ctRemPhysPortEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.6
ctRemPhysPortProtMgrMaxIfos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the maximum number of IFO's
that can be created on this physical interface."
::= { ctRemPhysPortEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.7
ctRemPhysPortProtMgrIfaceList OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies a list of interfaces that
will be assigned to this Protocol Managers data IFO's"
::= { ctRemPhysPortEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.8
ctRemPhysAlarmTimeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Whenever the physical port is configured for nailed-up
PPP this object specifies the time the physical port
must remain in a failed state as a condition to begin
the backup procedure. The backup procedure is begun for
any active interface(s) that were connected over the
failed physical port and which have been configured for
backup."
::= { ctRemPhysPortEntry 9 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.9
ctRemPhysWpimType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Mib object determines the Mode of operation that
the T1/DDS Wpim module will function as. Setting a value
of 1 will set the mode to DDS, setting a value of 2 will
set the mode to T1."
DEFVAL { 2 }
::= { ctRemPhysPortEntry 10 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.10
ctRemInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtRemInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of
entries is dependent upon the total number of remote
interfaces configured."
::= { ctRemoteConnection 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3
ctRemInterfaceEntry OBJECT-TYPE
SYNTAX CtRemInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products."
INDEX { ctRemIntEntIfIndex }
::= { ctRemInterfaceTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1
CtRemInterfaceEntry ::=
SEQUENCE {
ctRemIntEntIfIndex
INTEGER,
ctRemIntEntCompression
INTEGER,
ctRemIntEntCompRatio
DisplayString,
ctRemIntEntCompStatus
INTEGER,
ctRemIntEntMTU
INTEGER,
ctRemIntEntCongestion
INTEGER,
ctRemIntEntMaxProfiles
INTEGER,
ctRemIntEntTxIdleTimeout
INTEGER,
ctRemIntEntRxIdleTimeout
INTEGER,
ctRemIntEntCircuitName
DisplayString,
ctRemIntEntEncryption
INTEGER,
ctRemIntEntEncryptStatus
INTEGER
}
ctRemIntEntIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctRemInterfaceEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.1
ctRemIntEntCompression OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This flag will indicate whether compression should take
place on this interface."
DEFVAL { off }
::= { ctRemInterfaceEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.2
ctRemIntEntCompRatio OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This string indicates the current compression ratio
on this interface."
::= { ctRemInterfaceEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.3
ctRemIntEntCompStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This flag will indicate whether compression has been
nogotiated on this interface."
::= { ctRemInterfaceEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.4
ctRemIntEntMTU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The MTU to be negotiated for this interface. This will
not be updated with the actual MTU, which can be found
in the ifTable."
::= { ctRemInterfaceEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.5
ctRemIntEntCongestion OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the Leaky Bucket algorithm flag for
a Frame Relay circuit on this intertface. The option is
supported when this flag is enabled, and not supported
when this flag is disabled."
DEFVAL { disabled }
::= { ctRemInterfaceEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.6
ctRemIntEntMaxProfiles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the maximum number of neighbor profiles.
A neighbor profile describes a possible connection. The maximum
should be set to account for support of PPP multilink. That is
to say, if PPP multilink is being used then the number of profiles
must at least accomodate the maximum possible number of additional
more BW connections. As such, each neighbor profile would then
describe a possible connection to the same remote end point."
::= { ctRemInterfaceEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.7
ctRemIntEntTxIdleTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the idle timeout value in which a
packet needs to be transmitted before the interface is
automatically disconnected. Allowed values are in
increments of five seconds including zero."
::= { ctRemInterfaceEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.8
ctRemIntEntRxIdleTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the idle timeout in which a packet
needs to be received before the interface is automatically
disconnected. Allowed values are in increments of five
seconds including zero."
::= { ctRemInterfaceEntry 9 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.9
ctRemIntEntCircuitName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object associates a circuit name with a specific interface."
::= { ctRemInterfaceEntry 10 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.10
ctRemIntEntEncryption OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This flag will indicate whether encryption should take
place on this interface."
DEFVAL { off }
::= { ctRemInterfaceEntry 11 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.11
ctRemIntEntEncryptStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This flag will indicate whether Encryption has been
nogotiated on this interface."
::= { ctRemInterfaceEntry 12 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.12
ctRemPrimaryInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtRemPrimaryInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of
entries is dependent upon the total number of remote
interfaces configured."
::= { ctRemoteConnection 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.4
ctRemPrimaryInterfaceEntry OBJECT-TYPE
SYNTAX CtRemPrimaryInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products."
INDEX { ctRemPriIntEntIfIndex }
::= { ctRemPrimaryInterfaceTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.4.1
CtRemPrimaryInterfaceEntry ::=
SEQUENCE {
ctRemPriIntEntIfIndex
INTEGER,
ctRemPriIntEntConnectRetryInterval
INTEGER
}
ctRemPriIntEntIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctRemPrimaryInterfaceEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.1
ctRemPriIntEntConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the interval in seconds between retries
for restoring the primary interface."
DEFVAL { 30 }
::= { ctRemPrimaryInterfaceEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.2
ctRemBackupInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtRemBackupInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of
entries is dependent upon the total number of remote
interfaces configured."
::= { ctRemoteConnection 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5
ctRemBackupInterfaceEntry OBJECT-TYPE
SYNTAX CtRemBackupInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products."
INDEX { ctRemIntEntBackupIfIndex }
::= { ctRemBackupInterfaceTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1
CtRemBackupInterfaceEntry ::=
SEQUENCE {
ctRemIntEntBackupIfIndex
INTEGER,
ctRemIntEntBackupIfNum
INTEGER,
ctRemIntEntBackupIfInUseCnt
INTEGER,
ctRemIntEntBackupIfTimeToConnect
INTEGER,
ctRemIntEntBackupIfTimeToDisconnect
INTEGER,
ctRemIntEntBackupIfOverride
INTEGER,
ctRemIntEntBackupConnectRetries
INTEGER,
ctRemIntEntBackupConnectRetryInterval
INTEGER
}
ctRemIntEntBackupIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctRemBackupInterfaceEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.1
ctRemIntEntBackupIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies which ifIndex will backup this
interface in the event of a communications failure."
::= { ctRemBackupInterfaceEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.2
ctRemIntEntBackupIfInUseCnt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies how many other interfaces this
interface will backup."
::= { ctRemBackupInterfaceEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.3
ctRemIntEntBackupIfTimeToConnect OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies how long to wait in seconds before
attempting to switchover to the backup interface. Allowed
values are in increments of five seconds including zero."
::= { ctRemBackupInterfaceEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.4
ctRemIntEntBackupIfTimeToDisconnect OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies how long to wait in seconds before
attempting to switchover to the primary interface. Allowed
values are in increments of five seconds including zero."
::= { ctRemBackupInterfaceEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.5
ctRemIntEntBackupIfOverride OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies if the interface will switch back to
the primary link after it has become active again. A force
condition will not allow the interface to switch back."
DEFVAL { disabled }
::= { ctRemBackupInterfaceEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.6
ctRemIntEntBackupConnectRetries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the number of tries to bring-up the
backup interface before giving up."
::= { ctRemBackupInterfaceEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.7
ctRemIntEntBackupConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the interval in seconds between retries
for bringing up backup interface before giving up."
::= { ctRemBackupInterfaceEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.8
ctRemExtPhysPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtRemExtPhysPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of the descriptions of the physical remote access
ports of this platform."
::= { ctRemoteConnection 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6
ctRemExtPhysPortEntry OBJECT-TYPE
SYNTAX CtRemExtPhysPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A physical port entry. It contains objects relating to a
given physical remote access port"
INDEX { ctRemExtConnectionIndex }
::= { ctRemExtPhysPortTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1
CtRemExtPhysPortEntry ::=
SEQUENCE {
ctRemExtConnectionIndex
INTEGER,
ctRemExtProtMgrIndex
INTEGER,
ctRemExtPhysPortProtMgrType
INTEGER,
ctRemExtPhysPortProtMgrEnable
INTEGER,
ctRemExtPhysPortProtMgrIfaceNum
INTEGER,
ctRemExtPhysPortProtMgrMaxIfos
INTEGER,
ctRemExtPhysPortProtMgrIfaceList
DisplayString,
ctRemExtPhysPortProtMgrChannelList
DisplayString
}
ctRemExtConnectionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value indicating the remote connection this entry
is located on."
::= { ctRemExtPhysPortEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.1
ctRemExtProtMgrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value indicating the protMgr number for this entry."
::= { ctRemExtPhysPortEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.2
ctRemExtPhysPortProtMgrType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
pppNailedUp(2),
isdnPriPpp(3),
isdnBriPpp(4),
frameRelayPvcRtr(5),
frameRelayPvcSw(6),
hdlc(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies an instance of the type
of Protocol Manager residing on this physical
port. Before a physical port may be used, the type
of manager must be designated. For example, if the
physical port was going to be used as an ISDN PRI
interface, with dial up PPP links, then the manager
type would be set to (4), ISDN-PRI-PPP."
DEFVAL { none }
::= { ctRemExtPhysPortEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.3
ctRemExtPhysPortProtMgrEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies an instance of the the
enable flag of Protocol Manager residing on this
physical port."
DEFVAL { disabled }
::= { ctRemExtPhysPortEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.4
ctRemExtPhysPortProtMgrIfaceNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the interface number that
will be assigned to the Protocol Managers IFO"
::= { ctRemExtPhysPortEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.5
ctRemExtPhysPortProtMgrMaxIfos OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the maximum number of IFO's
that can be created on this physical interface."
::= { ctRemExtPhysPortEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.6
ctRemExtPhysPortProtMgrIfaceList OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies a list of interfaces that
will be assigned to this Protocol Managers data IFO's"
::= { ctRemExtPhysPortEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.7
ctRemExtPhysPortProtMgrChannelList OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies a list of channles/timeslots
that will be assigned to this Protocol Managers data IFO's"
::= { ctRemExtPhysPortEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.8
-- Cabletron Ds1 Extensions Group
-- This group is required for any platforms that have a t1 or e1 physical
-- port.
ctDs1ExtensionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDs1ExtensionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is an extension to the standard ds1 configuration
table. It is a list of items that are pertinant to ds1 ports
on a platform. There is one entry per ds1 physical port on
the platform."
::= { ctDs1Ext 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1
ctDs1ExtensionsEntry OBJECT-TYPE
SYNTAX CtDs1ExtensionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A ds1 extensions entry containing objects relating to
the particular ds1 physical port."
INDEX { ctDs1ExtensionsEntryIndex }
::= { ctDs1ExtensionsTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1
CtDs1ExtensionsEntry ::=
SEQUENCE {
ctDs1ExtensionsEntryIndex
INTEGER,
ctDs1ExtensionsNumInterfaces
INTEGER,
ctDs1ExtensionsToggleFracTable
INTEGER,
ctDs1ExtensionsLineBuildOut
INTEGER,
ctDs1ExtensionsCFADuration
INTEGER,
ctDs1ExtensionsDIEnable
INTEGER,
ctDs1ExtensionsTotalValidIntervals
Counter,
wanDs1ExtensionsBertTestMode
INTEGER,
wanDs1ExtensionsBertRun
INTEGER,
wanDs1ExtensionsBertCurrentResults
INTEGER,
wanDs1ExtensionsBertCumulativeResults
INTEGER,
wanDs1ExtensionsBertPeakResults
INTEGER,
wanDs1ExtensionsBertAverageResult
INTEGER,
wanDs1ExtensionsBertTestPattern
INTEGER,
wanDs1ExtensionsBertSamplePeriod
INTEGER,
wanDs1ExtensionsBertNumPeriods
Counter,
wanDs1ExtensionsBertTestTraps
INTEGER,
wanDs1ExtensionsBertDataStatus
INTEGER
}
ctDs1ExtensionsEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each ds1 physical port on the platform."
::= { ctDs1ExtensionsEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.1
ctDs1ExtensionsNumInterfaces OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of interfaces on this physical port. This
number inidicates the number of entries this physical port
uses in the ifTable."
REFERENCE
"rfc-1213"
::= { ctDs1ExtensionsEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.2
ctDs1ExtensionsToggleFracTable OBJECT-TYPE
SYNTAX INTEGER {
update-table(1),
display-new(2),
display-old(3),
restore-old(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object to 1 will cause the Ds1 Fractional
Table to be updated with the new values, as entered.
Setting this object to 2, will cause the Ds1 Fractional
Table to view as the table being entered.
Setting this object to 3, will cause the Ds1 Fractional
Table to be the table that is currently in use, regardless
of any changes being entered.
Setting this object to 4, will cause any changes that have
been made to the Ds1 Fractional Table since the last
update-table to be deleted.
For physical ports that are of type synch, or for Ds1 ports
that do not support the Ds1 Fractional Table, this object will
have no affect, and will always return a 1."
REFERENCE
"rfc-1406"
::= { ctDs1ExtensionsEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.3
ctDs1ExtensionsLineBuildOut OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
zero(2),
minus-7point5(3),
minus-15(4),
a133to266feet(5),
a266to399feet(6),
a399to533feet(7),
a533to655feet(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The line build out setting for this ds1 physical port.
Unknown indicates that the setting is neither readable or
writable."
DEFVAL { zero }
::= { ctDs1ExtensionsEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.4
ctDs1ExtensionsCFADuration OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The length of time (in seconds), that the ds1 port will
remain in the Carrier Failure Alarm state after the
alarm condition has cleared. For those Ds1 ports not
supporting Carrier Failure Alarm duration, this object
always returns 1, and setting the object has no effect."
::= { ctDs1ExtensionsEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.5
ctDs1ExtensionsDIEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables or disables Drop and Insert functionality on a
D/I WPIM. If enabled, all zero assigned timeslots will
designate D/I interface channels, if disabled all zero
channels will designate dummy channels as on a T1 or E1."
DEFVAL { enable }
::= { ctDs1ExtensionsEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.6
ctDs1ExtensionsTotalValidIntervals OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of previous intervals for which
valid data was collected for the DS1 mib, which
is currently RFC1406. This counter is similar to
RFC1406 dsx1ValidIntervals except that the count
represents the total number of complete 15 minute
intervals since the ds1 interface has been online,
and does not stop at the 24 hour period."
::= { ctDs1ExtensionsEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.7
wanDs1ExtensionsBertTestMode OBJECT-TYPE
SYNTAX INTEGER{
none(1),
internal(2),
manual(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to request that a type of
process be in control of the testing function.
This is used to differentiate between automated test
procedures and those manually controlled by a user.
When read, this object reflects which type of process
is actually in control of the testing function. The
implementation is free to prioritize or deny requests
in a proprietary manner."
::= { ctDs1ExtensionsEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.8
wanDs1ExtensionsBertRun OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the sending of test data over this physical
port. The data is a pattern described by
wanDs1ExtensionsBertTestPattern."
::= { ctDs1ExtensionsEntry 9 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.9
wanDs1ExtensionsBertCurrentResults OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the results of the testing for the
last completed sampling period. A non-negative
number is the error rate in bits per million bits."
::= { ctDs1ExtensionsEntry 10 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.10
wanDs1ExtensionsBertCumulativeResults OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of errors since the
testing was enabled. It is not a rate."
::= { ctDs1ExtensionsEntry 11 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.11
wanDs1ExtensionsBertPeakResults OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the highest value of
wanDs1ExtensionsBertCurrentResults since the testing
was enabled. A non-negative number is the error rate
in bits per million bits."
::= { ctDs1ExtensionsEntry 12 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.12
wanDs1ExtensionsBertAverageResult OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the average value of
wanDs1ExtensionsBertCurrentResults since the testing
was enabled. A non-negative number is the error rate
in bits per million bits."
::= { ctDs1ExtensionsEntry 13 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.13
wanDs1ExtensionsBertTestPattern OBJECT-TYPE
SYNTAX INTEGER {
patternOther(1),
pattern1s(2),
pattern63(3),
pattern511(4),
pattern2047(5),
pattern3in24(6),
patternQRSS(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to specify the pattern of the
test data."
::= { ctDs1ExtensionsEntry 14 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.14
wanDs1ExtensionsBertSamplePeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is the duration of time in seconds at
which the current test results will be periodically
written to wanDs1ExtensionsBertCurrentResults. The
range is 1 to 3600, with a default value of 10."
::= { ctDs1ExtensionsEntry 15 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.15
wanDs1ExtensionsBertNumPeriods OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of sampling periods that have elapsed
during the current test run."
::= { ctDs1ExtensionsEntry 16 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.16
wanDs1ExtensionsBertTestTraps OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to enable or disable the sending
of a trap at the conclusion of the measurement period.
The trap will contain the information described by
ctDs1BertCurrentResults. The default value is disabled."
::= { ctDs1ExtensionsEntry 17 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.17
wanDs1ExtensionsBertDataStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
waitingForLink(2),
waitingForLoopback(3),
running(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object provides the operating status of the
transmission of test data packets."
::= { ctDs1ExtensionsEntry 18 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.18
ctDs1WanDriverTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDs1WanDriverEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is an extension to the standard ds1
configuration table. It is a list of items that are
pertinant to the hdlc driver on a platform. There is
one entry per ds1 physical port on the platform."
::= { ctDs1Ext 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.2
ctDs1WanDriverEntry OBJECT-TYPE
SYNTAX CtDs1WanDriverEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A ds1 wan driver entry containing objects relating to
the particular ds1 physical port pertaining to a specific
channel on the wan driver chip."
INDEX { ctDs1WanDriverEntryIndex, ctDs1WanDriverChannelIndex }
::= { ctDs1WanDriverTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1
CtDs1WanDriverEntry ::=
SEQUENCE {
ctDs1WanDriverEntryIndex
INTEGER,
ctDs1WanDriverChannelIndex
INTEGER,
ctDs1WanDriverLineCode
INTEGER,
ctDs1WanDriverCRCBits
INTEGER
}
ctDs1WanDriverEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each ds1 physical port on the platform."
::= { ctDs1WanDriverEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.1
ctDs1WanDriverChannelIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each channel on a wan driver on the
platform."
::= { ctDs1WanDriverEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.2
ctDs1WanDriverLineCode OBJECT-TYPE
SYNTAX INTEGER {
none (1),
jBZS (2),
invHDLC (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object controls the individual channels line coding
on a wan driver device on the platform."
DEFVAL { none }
::= { ctDs1WanDriverEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.3
ctDs1WanDriverCRCBits OBJECT-TYPE
SYNTAX INTEGER {
crc16 (1),
crc32 (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object controls the individual channels CRC bits
generation on a wan driver device on the platform."
DEFVAL { crc16 }
::= { ctDs1WanDriverEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.4
-- Cabletron Rs232 Extensions Group
-- This group is only required if any physical port on the system can be
-- classified as rs232-like
ctRs232ExtensionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtRs232ExtensionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is an extension to the standard rs232-like mib.
It is a list of items that are pertinant to rs232-like ports
on a platform. There is one entry per synchronous physical
port on the platform."
REFERENCE
"rfc-1317"
::= { ctRs232Ext 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3.1
ctRs232ExtensionsEntry OBJECT-TYPE
SYNTAX CtRs232ExtensionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A rs232-like extensions entry containing objects relating
to the particular rs232-like physical port."
INDEX { ctRs232ExtensionsEntryIndex }
::= { ctRs232ExtensionsTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1
CtRs232ExtensionsEntry ::=
SEQUENCE {
ctRs232ExtensionsEntryIndex
INTEGER,
ctRs232ExtensionsCTSEnable
INTEGER,
ctRs232ExtensionsDSREnable
INTEGER,
ctRs232ExtensionsRTSEnable
INTEGER,
ctRs232ExtensionsDTREnable
INTEGER
}
ctRs232ExtensionsEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each rs232-like physical port on
the platform."
::= { ctRs232ExtensionsEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.1
ctRs232ExtensionsCTSEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether the platform should
generate CTS. When disabled the platform will not
generate CTS, when enabled, the platform will generate
CTS. The actual state of the CTS line is available
in the rs-232 like mib."
REFERENCE
"rfc-1317"
DEFVAL { disable }
::= { ctRs232ExtensionsEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.2
ctRs232ExtensionsDSREnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether the platform should
generate DSR. When disabled the platform will not
generate DSR, when enabled, the platform will generate
DSR. The actual state of the DSR line is available
in the rs-232 like mib."
REFERENCE
"rfc-1317 "
DEFVAL { disable }
::= { ctRs232ExtensionsEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.3
ctRs232ExtensionsRTSEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether the platform should
generate RTS. When disabled the platform will not
generate RTS, when enabled, the platform will generate
RTS. The actual state of the RTS line is available
in the rs-232 like mib."
REFERENCE
"rfc-1317"
DEFVAL { disable }
::= { ctRs232ExtensionsEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.4
ctRs232ExtensionsDTREnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether the platform should
generate DTR. When disabled the platform will not
generate DSR, when enabled, the platform will generate
DTR. The actual state of the DTR line is available
in the rs-232 like mib."
REFERENCE
"rfc-1317 "
DEFVAL { disable }
::= { ctRs232ExtensionsEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.5
-- ctFrDcp Group
-- This group is mandatory to support Data Compression Protocol
-- (DCP following FRF.9) for per virtual circuit basis
frDcpCircuitTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrDcpCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing data compression information about
specific Data Link Connection Identifiers and
corresponding virtual circuit. This information is used
to support the frCircuitTable following RFC-1315."
::= { ctFrDcp 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4.1
frDcpCircuitEntry OBJECT-TYPE
SYNTAX FrDcpCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The data compression information regarding a single Data
Link Connection Identifier."
INDEX { frDcpCircuitIfIndex, frDcpCircuitDlci }
::= { frDcpCircuitTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1
FrDcpCircuitEntry ::=
SEQUENCE {
frDcpCircuitIfIndex
Index,
frDcpCircuitDlci
DLCI,
frDcpCircuitEnable
INTEGER,
frDcpCircuitStatus
INTEGER,
frDcpCircuitRatio
OCTET STRING
}
frDcpCircuitIfIndex OBJECT-TYPE
SYNTAX Index
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of ifEntry that this DCP virtual
circuit object is layered onto."
::= { frDcpCircuitEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.1
frDcpCircuitDlci OBJECT-TYPE
SYNTAX DLCI
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Data Link Connection Identifier for this DCP virtual
circuit object."
REFERENCE
"Draft American National Standard T1.618-1991,
Section 3.3.6"
::= { frDcpCircuitEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.2
frDcpCircuitEnable OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2) -- default
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether data compression should take place on
this particular end side virtual circuit."
DEFVAL { off }
::= { frDcpCircuitEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.3
frDcpCircuitStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"On indicates that the compression has been successfully
negotiated and is operating. Off indicates that the
compression negotiation has failed and compression is not
operating at this time, or compression has been terminated
by either peer."
::= { frDcpCircuitEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.4
frDcpCircuitRatio OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (5))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ratio of uncompressed to compressed transmitted data.
If the data compression status is off, 1:1 will be
displayed."
::= { frDcpCircuitEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.5
-- Cabletron DDS Extensions Group
-- This group is required for any platforms that have a dds physical port.
ctDDSConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDDSConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The DDS Configuration Table"
::= { ctDDSExt 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1
ctDDSConfigEntry OBJECT-TYPE
SYNTAX CtDDSConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An Entry in the DDS Configuration Table"
INDEX { ctDDSLineIndex }
::= { ctDDSConfigTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1
CtDDSConfigEntry ::=
SEQUENCE {
ctDDSLineIndex
INTEGER,
ctDDSIfIndex
INTEGER,
ctDDSLineMode
INTEGER,
ctDDSLineCoding
INTEGER,
ctDDSLoopbackConfig
INTEGER,
ctDDSLineStatus
INTEGER,
ctDDSTxClockSource
INTEGER,
ctDDSPortInSpeed
INTEGER,
ctDDSPortOutSpeed
INTEGER
}
ctDDSLineIndex OBJECT-TYPE
SYNTAX INTEGER (1..'7fffffff'h)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each ds1 physical port on the
platform."
::= { ctDDSConfigEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.1
ctDDSIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..'7fffffff'h)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index associated with this dds physical port"
::= { ctDDSConfigEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.2
ctDDSLineMode OBJECT-TYPE
SYNTAX INTEGER {
ddsPri (1),
ddsSc (2),
ddsCc (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DDS-PRI is full duplex 56k link, No framing in loop data
so loop speed is also 56k. Data stream:
--d1 d2 d3 d4 d5 d6 d7--
DDS-SC is also full duplex 56k link, requires framing bits
to distinguish between primary and secondary channels.
--d1 d2 d3 d4 d5 d6 d7 F C/S--
where F is framing bit and C/S for secondary channel as
well as used for control bit.
With these two extra bits the loop speed is increased to
72k. primary channel rate is 56k.
DDS-CC is full duplex 64k link. Does not require framing
bit but uses a same format as SC, nineth bit position is
lumped with primary channel and not used for control.
Loop speed is 72k, Primary channel rate is 64k.
--d1 d2 d3 d4 d5 d6 d7 F d8--"
::= { ctDDSConfigEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3
ctDDSLineCoding OBJECT-TYPE
SYNTAX INTEGER {
ddsNone (1),
ddsJBZS (2),
otherLineCode (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object describes the variety of Zero Code
suppression on this interface. JBZS refers to Jammed
Bit Zero suppresion, which forces a 1 bit every 8 bit
periods. None refers to a mode in which some other
means is used to insure pulse density requirements."
::= { ctDDSConfigEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.4
ctDDSLoopbackConfig OBJECT-TYPE
SYNTAX INTEGER {
ddsNoLoop (1),
ddsLocalLoop (2),
ddsLineLoop (3),
ddsOtherLoop (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents the loopback configuration
of the DDS interface. ddsNoLoop means the interface
is not in loopback state, ddsLocalLoop means the signal
is transmitted and looped back to the same interface,
ddsLineLoop means the received signal at this interface
does not go through the device but is looped back out,
and ddsOtherLoop represents a loop not defined here."
::= { ctDDSConfigEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.5
ctDDSLineStatus OBJECT-TYPE
SYNTAX INTEGER {
ddsNoAlarm (1),
ddsLossOfSignal (2),
ddsOutOfService (3),
ddsOutOfFrame (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable describes the current operational status of
DDS line."
::= { ctDDSConfigEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.6
ctDDSTxClockSource OBJECT-TYPE
SYNTAX INTEGER {
ddsLoopTiming (1),
ddsLocalTiming (2),
ddsThroughTiming (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source of Transmit clock.
'ddsLoopTiming' indicates that the recovered receive clock
is used as transmit clock.
'ddsLocalTiming' indicates that a local clock source is
used.
'ddsThroughTiming' indicates that recovered receive clock
from another interface is used as transmit clock."
::= { ctDDSConfigEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.7
ctDDSPortInSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This variable describes the current operational
receive speed of DDS line. It is a read only value
based entirely on DDS type (CC or PRI)."
::= { ctDDSConfigEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.8
ctDDSPortOutSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable describes the current operational
transmit speed of DDS line. It is a read only value
based entirely on DDS type CC or PRI"
::= { ctDDSConfigEntry 9 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.9
--
-- Ctron PPP Counters Group.
-- The following object reflect the values of the
-- counters used for each PPP link.
-- ctPppCountersIfIndex
-- ctPppCountersMaxTerminate
-- ctPppCountersMaxConfigure
-- ctPppCountersMaxFailure
-- ctPppCountersRestartTimer
ctPppCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtPppCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters for the local
PPP entity related to the counters and timers."
::= { ctPPPExt 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.1
ctPppCountersEntry OBJECT-TYPE
SYNTAX CtPppCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PPP counter/timer information for a particular
PPP link."
INDEX { ctPppCountersIfIndex }
::= { ctPppCountersTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1
CtPppCountersEntry ::= SEQUENCE {
ctPppCountersIfIndex
INTEGER,
ctPppCountersMaxTerminate
INTEGER,
ctPppCountersMaxConfigure
INTEGER,
ctPppCountersMaxFailure
INTEGER,
ctPppCountersRestartTimer
INTEGER
}
ctPppCountersIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctPppCountersEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.1
ctPppCountersMaxTerminate OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MaxTerminate indicates the number of Terminate-
Request packets sent without receiving a Terminate-Ack
before assuming that the peer in unable to respond."
::= { ctPppCountersEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.2
ctPppCountersMaxConfigure OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MaxConfigure indicates the number of Configure-
Request packets sent without receiving a Configure-Ack,
Configre-Nak or Configure-Reject before assuming that
the peer in unable to respond."
::= { ctPppCountersEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.3
ctPppCountersMaxFailure OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MaxFailure indicates the number of Configure-Nak
packets sent without sending a Configure-Ack
before assuming that the configuration is not
converging. Any further Configure-Reject packets
for peer requested options are converted to
Configure-Reject packets, and locally desires options
are no longer appended."
::= { ctPppCountersEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.4
ctPppCountersRestartTimer OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Restart timer is used to time transmissions
of Configure-Request and Terminate-Request packets.
Expiration of the Restart-Timer causes a Timeout
event, and retransmission of the corresponding
Configure-Request or Terminate-Request packet."
::= { ctPppCountersEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.5
--
-- Ctron PPP LCP Extentions Group.
-- The following object reflect the values of the
-- LCP parameters not included in RFCs for this PPP link.
--
-- ctPppLcpExtIfIndex
-- ctPppLcpExtAuthenticationProt
-- ctPppLcpExtQualityProt
-- ctPppLcpExtPFC
-- ctPppLcpExtACFC
-- ctPppLcpExtSelfDescribePadding
-- ctPppLcpExtCallback
-- ctPppLcpExtCompoundFrames
-- ctPppLcpExtMru
-- ctPppLcpExtAccm
-- ctPppLcpExtEchoRequest
-- ctPppLcpExtReplyCounter
-- ctPppLcpExtMpCapable
ctPppLcpExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtPppLcpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters for the local
PPP entity related to the counters and timers."
::= { ctPPPExt 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2
ctPppLcpExtEntry OBJECT-TYPE
SYNTAX CtPppLcpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PPP LCP configurationinformation for a particular
PPP link."
INDEX { ctPppLcpExtIfIndex }
::= { ctPppLcpExtTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1
CtPppLcpExtEntry ::= SEQUENCE {
ctPppLcpExtIfIndex
INTEGER,
ctPppLcpExtAuthenticationProt
INTEGER,
ctPppLcpExtQualityProt
INTEGER,
ctPppLcpExtPFC
INTEGER,
ctPppLcpExtACFC
INTEGER,
ctPppLcpExtSelfDescribePadding
INTEGER,
ctPppLcpExtCallback
INTEGER,
ctPppLcpExtCompoundFrames
INTEGER,
ctPppLcpExtMru
INTEGER,
ctPppLcpExtAccm
INTEGER,
ctPppLcpExtEchoRequest
INTEGER,
ctPppLcpExtReplyCounter
INTEGER,
ctPppLcpExtMpCapable
INTEGER
}
ctPppLcpExtIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctPppLcpExtEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.1
ctPppLcpExtAuthenticationProt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
pap(2),
chap(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enables a particular authentication protocol on this
PPP link(now modified for read-only."
::= { ctPppLcpExtEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.2
ctPppLcpExtQualityProt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
lqr(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables a particular link-quality protocol on this
PPP link."
::= { ctPppLcpExtEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.3
ctPppLcpExtPFC OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables protocol field compression on this PPP link."
::= { ctPppLcpExtEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.4
ctPppLcpExtACFC OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables address and control field compression on this PPP
link."
::= { ctPppLcpExtEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.5
ctPppLcpExtSelfDescribePadding OBJECT-TYPE
SYNTAX INTEGER(1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Configuration Option provides a method for an
implementation to indicate to the peer that it
understands self-describing pads when padding is added
at the end of the PPP Information field."
::= { ctPppLcpExtEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.6
ctPppLcpExtCallback OBJECT-TYPE
SYNTAX INTEGER(1..6)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Configuration Option provides a method for an
implementation to request a dial-up peer to call back."
::= { ctPppLcpExtEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.7
ctPppLcpExtCompoundFrames OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Configuration Option provides a method for an
implementation to send multiple PPP encapsulated packets
within the same frame."
::= { ctPppLcpExtEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.8
ctPppLcpExtMru OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables and disables Mru status."
::= { ctPppLcpExtEntry 9 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.9
ctPppLcpExtAccm OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables and disables Accm status."
::= { ctPppLcpExtEntry 10 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.10
ctPppLcpExtEchoRequest OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A zero indicated no Echo Request and any other value provides
an interval to send Echo-Requests to the Peer.
The Echo-Request provides a Data Link Layer loopback mechanism
for use in exercising both directions of the link. This
is useful in debugging, link quality determination. LCP
MUST be in the OPENED state for an Echo-Request to occur."
::= { ctPppLcpExtEntry 11 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.11
ctPppLcpExtReplyCounter OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Increments a counter if the Local Device correctly
received an Echo-Reply from the Peer. LCP MUST be
in the OPENED state for an Echo-Reply to occur."
::= { ctPppLcpExtEntry 12 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.12
ctPppLcpExtMpCapable OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Multilink Protocol (MP) option selector. Set to a value
of one when MP support is desired otherwise set to a
value of two. The default value is two. When set to two
the attempt is made to negotiate MP support. MP support
is symmetrical."
::= { ctPppLcpExtEntry 13 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.13
--
-- Ctron PPP BNCP Extentions Group.
-- The following object reflect the values of the
-- LCP parameters not included in RFCs for this PPP link.
-- pppBncpExtIfIndex
-- pppBncpExtCrcStatus
ctPppBncpExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtPppBncpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters for the local
PPP entity related to the counters and timers."
::= { ctPPPExt 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.3
ctPppBncpExtEntry OBJECT-TYPE
SYNTAX CtPppBncpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PPP LCP configuration information for a particular
PPP link."
INDEX { ctPppBncpExtIfIndex }
::= { ctPppBncpExtTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.3.1
CtPppBncpExtEntry ::= SEQUENCE {
ctPppBncpExtIfIndex
INTEGER,
ctPppBncpExtCrcStatus
INTEGER
}
ctPppBncpExtIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctPppBncpExtEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.1
ctPppBncpExtCrcStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables and disables CRC status. First our platform must
support CRC. If the platform does, then setting to
disabled will not send CRC. The default is enabled,
which sends CRC."
::= { ctPppBncpExtEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.2
-- Ctron PPP MP Extentions Group.
-- The following object reflect the values of the
-- LCP parameters not included in RFCs for this PPP link.
-- ctPppMpExtIfIndex
-- ctPppLcpExtMpLUT
-- ctPppLcpExtMpHistoryTime
-- ctPppLcpExtMpMoreBW
-- ctPppLcpExtMpLessBW
-- ctPppLcpExtMpMaxChannels
-- ctPppLcpExtMpChannelsToAdd
-- ctPppLcpExtMpChannelsToRemove
ctPppMpExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtPppMpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters for the local
PPP entity related to the counters and timers."
::= { ctPPPExt 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4
ctPppMpExtEntry OBJECT-TYPE
SYNTAX CtPppMpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PPP LCP configurationinformation for a particular
PPP link."
INDEX { ctPppMpExtIfIndex }
::= { ctPppMpExtTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1
CtPppMpExtEntry ::= SEQUENCE {
ctPppMpExtIfIndex
INTEGER,
ctPppLcpExtMpLUT
INTEGER,
ctPppLcpExtMpHistoryTime
INTEGER,
ctPppLcpExtMpMoreBW
INTEGER,
ctPppLcpExtMpLessBW
INTEGER,
ctPppLcpExtMpMaxChannels
INTEGER,
ctPppLcpExtMpChannelsToAdd
INTEGER,
ctPppLcpExtMpChannelsToRemove
INTEGER
}
ctPppMpExtIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctPppMpExtEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.1
ctPppLcpExtMpLUT OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to set the Line Utilization Threshold (LUT) % value
to compare against the linear weighted percentage by
which to determine when more/less bandwidth is to be
added/removed. Linear weighting is averaged over the
period of time specified by ctPppLcpExtMpHistoryTime."
::= { ctPppMpExtEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.2
ctPppLcpExtMpHistoryTime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to set the history time value in seconds for the
number of line utilization reading(s) desired to compute
the average line utilization. That is to say, it
specifies the window size over which to compute the
average line utilization."
::= { ctPppMpExtEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.3
ctPppLcpExtMpMoreBW OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to set the number of consecutive line utilization
average readings that must exceed ctPppLcpExtMpLUT as
a condition of when to increase the bandwidth if more
BW is permitted."
::= { ctPppMpExtEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.4
ctPppLcpExtMpLessBW OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to set the number of consecutive line utilization
average readings that must fall below ctPppLcpExtMpLUT
as a condition of when to remove possible previously
added bandwidth."
::= { ctPppMpExtEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.5
ctPppLcpExtMpMaxChannels OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to set the maxium number of channels an MP capable
connection is allowed."
::= { ctPppMpExtEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.6
ctPppLcpExtMpChannelsToAdd OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to set the number of additional channel(s) to
increment by whenever the need for more bandwidth is
determined."
::= { ctPppMpExtEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.7
ctPppLcpExtMpChannelsToRemove OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to set the number of channel(s) to decrement by
whenever the need for possible previously added bandwidth
is determined to no longer be needed."
::= { ctPppMpExtEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.8
-- Ctron PPP ECP Extentions Group.
-- The following object reflect the values of the
-- ECP parameters not included in RFCs for this PPP link.
ctPppEcpExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtPppEcpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters for the local
PPP entity related to the encrpytion control protocol."
::= { ctPPPExt 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.5
ctPppEcpExtEntry OBJECT-TYPE
SYNTAX CtPppEcpExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PPP ECP configuration information for a particular
PPP link."
INDEX { ctPppEcpExtIfIndex }
::= { ctPppEcpExtTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1
CtPppEcpExtEntry ::= SEQUENCE {
ctPppEcpExtIfIndex
INTEGER,
ctPppEcpKey
DisplayString,
ctPppEcpIV
DisplayString
}
ctPppEcpExtIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctPppEcpExtEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.1
ctPppEcpKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(14))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A 56-bit key (14 hex characters) used for the DES encryption."
::= { ctPppEcpExtEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.2
ctPppEcpIV OBJECT-TYPE
SYNTAX DisplayString (SIZE(16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A 64-bit initialization vector (16 hex characters) used for
the DES encryption in CBC mode."
::= { ctPppEcpExtEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.3
-- ctWanalyzer Group
-- This group is mandatory for all platforms which implement the
-- WANalyzer
-- ctWanalyzerIfIndex
-- ctwanalyzerEnabled
-- ctwanalyzerMaxEntries
-- ctwanalyzerClearAll
-- ctwanalyzerClearInterface
-- ctwanalyzerDisplayInterface
-- ctwanalyzerCurrEntries
ctWanalyzerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtWanalyzerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters for the local
Wanalyzer entity related to the configured Protocol."
::= { ctWanalyzer 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1
ctWanalyzerEntry OBJECT-TYPE
SYNTAX CtWanalyzerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information for a particular
interface."
INDEX { ctWanalyzerIfIndex }
::= { ctWanalyzerTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1
CtWanalyzerEntry ::= SEQUENCE {
ctWanalyzerIfIndex
INTEGER,
ctWanalyzerEnabled
INTEGER,
ctWanalyzerMaxEntries
INTEGER,
ctWanalyzerClearAll
INTEGER,
ctWanalyzerClearInterface
INTEGER,
ctWanalyzerDisplayInterface
INTEGER,
ctWanalyzerCurrEntries
INTEGER
}
ctWanalyzerIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex of the interface. This is the index of this
entry in the ifTable."
REFERENCE
"rfc-1213"
::= { ctWanalyzerEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.1
ctWanalyzerEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Persistent Object is a flag which indicates whether
or not the WANalyzer is enabled or disabled. Upon system
initialization this flag defaults to disabled unless
a value for this object is found in NVRAM."
::= { ctWanalyzerEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.2
ctWanalyzerMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Persistent Object is an integer greater than 1
which specifies the maximum total number of entries
which the table will handle. When the WANalyzer is
enabled this value defaults to a value dependent on
the implementation unless a value is found in NVRAM."
::= { ctWanalyzerEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.3
ctWanalyzerClearAll OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to 2, the entire table of entries is cleared.
Upon clearing of the table, this value is reset to 1.
This object is not present if the WANalyzer is disabled."
::= { ctWanalyzerEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.4
ctWanalyzerClearInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to 2, all entries for this MIB-II interface
index will be removed from the table. Upon complete
removal of those entries, this value is reset to 1.
This object is not present if the WANalyzer is disabled."
::= { ctWanalyzerEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.5
ctWanalyzerDisplayInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to a valid MIB-II interface number, the table
displays only those entries in the table which were
received from that MIB-II interface. This value is set
to -1 upon initialization and indicates that entries
from all interfaces will be displayed. This object
is not present if the WANalyzer is disabled."
::= { ctWanalyzerEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.6
ctWanalyzerCurrEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A non-negative integer indicating the current number
of entries in the table. This object is not present
if the WANalyzer is disabled."
::= { ctWanalyzerEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.7
-- Ctron Wan Table Extentions Group.
-- wanMessageIndex
-- wanMessageInterfaceIndex
-- wanMessageDate
-- wanMessageTime
-- wanMessageCode
wanalyzerMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF WanalyzerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing all of the message entries for this
device. If the WANalyzer is disabled, this table will
not be present."
::= { ctWanalyzer 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.2
wanalyzerEntry OBJECT-TYPE
SYNTAX WanalyzerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A message entry in the WANalyzer table corresponding
to a particular interface in a particular instance."
INDEX { wanMessageIndex }
::= { wanalyzerMessageTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1
WanalyzerEntry ::= SEQUENCE {
wanMessageIndex
INTEGER,
wanMessageInterfaceIndex
INTEGER,
wanMessageDate
DisplayString,
wanMessageTime
DisplayString,
wanMessageCode
INTEGER
}
wanMessageIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An integer between 1 and wanalyzerMaxEntries which
indicates the overall position this entry has in the
WANalyzer table."
::= { wanalyzerEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.1
wanMessageInterfaceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MIB-II interface index representing the interface
which sent this message."
::= { wanalyzerEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.2
wanMessageDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date when this message was received by the WANalyzer
in the standard MMDDYY format."
::= { wanalyzerEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.3
wanMessageTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time of day when this message was received by the
WANalyzer in the standard HHMMSS format."
::= { wanalyzerEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.4
wanMessageCode OBJECT-TYPE
SYNTAX INTEGER {
wanalyzerLastMessageRepeated(1),
pppAuthentication(2),
pppBncpThisLayerStart(3),
pppBncpThisLayerFinished(4),
pppBncpThisLayerUp(5),
pppBncpThisLayerDown(6),
pppBncpInitializeRestartCount(7),
pppBncpZeroRestartCount(8),
pppBncpRcvConfReqGood(9),
pppBncpRcvConfReqBad(10),
pppBncpReceiveConfigureAck(11),
pppBncpReceiveConfigureNak(12),
pppBncpReceiveConfigureReject(13),
pppBncpReceiveTerminateRequest(14),
pppBncpReceiveTerminateAck(15),
pppBncpReceiveCodeRejectPermitted(16),
pppBncpReceiveCodeRejectCatastrophic(17),
pppBncpReceiveProtocolRejectPermitted(18),
pppBncpReceiveEchoRequest(19),
pppBncpReceiveEchoReply(20),
pppBncpReceiveDiscardRequest(21),
pppBncpReceiveUnknownCode(22),
pppBncpIllegalAction(23),
pppBncpSendConfigureRequest(24),
pppBncpSendConfigureAck(25),
pppBncpSendConfigureNak(26),
pppBncpSendConfigureReject(27),
pppBncpSendTerminateRequest(28),
pppBncpSendTerminateAck(29),
pppBncpSendCodeReject(30),
pppBncpSendProtocolReject(31),
pppBncpSendEchoReply(32),
pppBncpInitialState(33),
pppBncpStartingState(34),
pppBncpClosedState(35),
pppBncpStoppedState(36),
pppBncpClosingState(37),
pppBncpStoppingState(38),
pppBncpReqSentState(39),
pppBncpAckRcvdState(40),
pppBncpAckSentState(41),
pppBncpOpenedState(42),
pppBncpEthernetMacType(43),
pppBncpTokenRingMacType(44),
pppBncpFddiMacType(45),
pppBncpBridgeIdRcvReq(46),
pppBncpBridgeIdRcvNak(47),
pppBncpBridgeIdRcvRej(48),
pppBncpBridgeIdXmitReq(49),
pppBncpMacSelectRcvReq(50),
pppBncpMacSelectRcvNak(51),
pppBncpMacSelectRcvRej(52),
pppBncpMacSelectXmitReq(53),
pppBncpTinygramRcvReq(54),
pppBncpTinygramRcvNak(55),
pppBncpTinygramRcvRej(56),
pppBncpTinygramXmitReq(57),
pppBncpLanIdRcvReq(58),
pppBncpLanIdRcvNak(59),
pppBncpLanIdRcvRej(60),
pppBncpLanIdXmitReq(61),
pppCcpThisLayerStart(62),
pppCcpThisLayerFinished(63),
pppCcpThisLayerUp(64),
pppCcpThisLayerDown(65),
pppCcpInitializeRestartCount(66),
pppCcpZeroRestartCount(67),
pppCcpRcvConfReqGood(68),
pppCcpRcvConfReqBad(69),
pppCcpReceiveConfigureAck(70),
pppCcpReceiveConfigureNak(71),
pppCcpReceiveConfigureReject(72),
pppCcpReceiveTerminateRequest(73),
pppCcpReceiveTerminateAck(74),
pppCcpReceiveCodeRejectPermitted(75),
pppCcpReceiveCodeRejectCatastrophic(76),
pppCcpReceiveProtocolRejectPermitted(77),
pppCcpReceiveEchoRequest(78),
pppCcpReceiveEchoReply(79),
pppCcpReceiveDiscardRequest(80),
pppCcpReceiveUnknownCode(81),
pppCcpIllegalAction(82),
pppCcpSendConfigureRequest(83),
pppCcpSendConfigureAck(84),
pppCcpSendConfigureNak(85),
pppCcpSendConfigureReject(86),
pppCcpSendTerminateRequest(87),
pppCcpSendTerminateAck(88),
pppCcpSendCodeReject(89),
pppCcpSendProtocolReject(90),
pppCcpSendEchoReply(91),
pppCcpInitialState(92),
pppCcpStartingState(93),
pppCcpClosedState(94),
pppCcpStoppedState(95),
pppCcpClosingState(96),
pppCcpStoppingState(97),
pppCcpReqSentState(98),
pppCcpAckRcvdState(99),
pppCcpAckSentState(100),
pppCcpOpenedState(101),
pppCcpProprietaryCompRcvReq(102),
pppCcpProprietaryCompRcvNak(103),
pppCcpProprietaryCompRcvRej(104),
pppCcpProprietaryCompXmitReq(105),
pppCcpPredictorType1RcvReq(106),
pppCcpPredictorType1RcvNak(107),
pppCcpPredictorType1RcvRej(108),
pppCcpPredictorType1XmitReq(109),
pppCcpPredictorType2RcvReq(110),
pppCcpPredictorType2RcvNak(111),
pppCcpPredictorType2RcvRej(112),
pppCcpPredictorType2XmitReq(113),
pppCcpPuddleJumperRcvReq(114),
pppCcpPuddleJumperRcvNak(115),
pppCcpPuddleJumperRcvRej(116),
pppCcpPuddleJumperXmitReq(117),
pppCcpHpPpcRcvReq(118),
pppCcpHpPpcRcvNak(119),
pppCcpHpPpcRcvRej(120),
pppCcpHpPpcXmitReq(121),
pppCcpStacLzsRcvReq(122),
pppCcpStacLzsRcvNak(123),
pppCcpStacLzsRcvRej(124),
pppCcpStacLzsXmitReq(125),
pppCcpMsPpcRcvReq(126),
pppCcpMsPpcRcvNak(127),
pppCcpMsPpcRcvRej(128),
pppCcpMsPpcXmitReq(129),
pppCcpGandalfFzaRcvReq(130),
pppCcpGandalfFzaRcvNak(131),
pppCcpGandalfFzaRcvRej(132),
pppCcpGandalfFzaXmitReq(133),
pppCcpV42bisRcvReq(134),
pppCcpV42bisRcvNak(135),
pppCcpV42bisRcvRej(136),
pppCcpV42bisXmitReq(137),
pppCcpBsdLzwRcvReq(138),
pppCcpBsdLzwRcvNak(139),
pppCcpBsdLzwRcvRej(140),
pppCcpBsdLzwXmitReq(141),
pppCcpStackDcpRcvReq(142),
pppCcpStackDcpRcvNak(143),
pppCcpStackDcpRcvRej(144),
pppCcpStackDcpXmitReq(145),
pppChapChallengeReceived(146),
pppChapResponseReceived(147),
pppChapSuccessReceived(148),
pppChapFailureReceived(149),
pppChapSuccessSent(150),
pppChapFailureSent(151),
pppChapChallengeSent(152),
pppChapResponseSent(153),
pppIpcpThisLayerStart(154),
pppIpcpThisLayerFinished(155),
pppIpcpThisLayerUp(156),
pppIpcpThisLayerDown(157),
pppIpcpInitializeRestartCount(158),
pppIpcpZeroRestartCount(159),
pppIpcpRcvConfReqGood(160),
pppIpcpRcvConfReqBad(161),
pppIpcpReceiveConfigureAck(162),
pppIpcpReceiveConfigureNak(163),
pppIpcpReceiveConfigureReject(164),
pppIpcpReceiveTerminateRequest(165),
pppIpcpReceiveTerminateAck(166),
pppIpcpReceiveCodeRejectPermitted(167),
pppIpcpReceiveCodeRejectCatastrophic(168),
pppIpcpReceiveProtocolRejectPermitted(169),
pppIpcpReceiveEchoRequest(170),
pppIpcpReceiveEchoReply(171),
pppIpcpReceiveDiscardRequest(172),
pppIpcpReceiveUnknownCode(173),
pppIpcpIllegalAction(174),
pppIpcpSendConfigureRequest(175),
pppIpcpSendConfigureAck(176),
pppIpcpSendConfigureNak(177),
pppIpcpSendConfigureReject(178),
pppIpcpSendTerminateRequest(179),
pppIpcpSendTerminateAck(180),
pppIpcpSendCodeReject(181),
pppIpcpSendProtocolReject(182),
pppIpcpSendEchoReply(183),
pppIpcpInitialState(184),
pppIpcpStartingState(185),
pppIpcpClosedState(186),
pppIpcpStoppedState(187),
pppIpcpClosingState(188),
pppIpcpStoppingState(189),
pppIpcpReqSentState(190),
pppIpcpAckRcvdState(191),
pppIpcpAckSentState(192),
pppIpcpOpenedState(193),
pppIpcpIpAddressRcvReq(194),
pppIpcpIpAddressRcvNak(195),
pppIpcpIpAddressRcvRej(196),
pppIpcpIpAddressXmitReq(197),
pppIpcpCompressionTypeRcvReq(198),
pppIpcpCompressionTypeRcvRej(199),
pppIpcpCompressionTypeRcvNak(200),
pppIpcpCompressionTypeXmitReq(201),
pppIpxcpThisLayerStart(202),
pppIpxcpThisLayerFinished(203),
pppIpxcpThisLayerUp(204),
pppIpxcpThisLayerDown(205),
pppIpxcpInitializeRestartCount(206),
pppIpxcpZeroRestartCount(207),
pppIpxcpRcvConfReqGood(208),
pppIpxcpRcvConfReqBad(209),
pppIpxcpReceiveConfigureAck(210),
pppIpxcpReceiveConfigureNak(211),
pppIpxcpReceiveConfigureReject(212),
pppIpxcpReceiveTerminateAck(214),
pppIpxcpReceiveCodeRejectPermitted(215),
pppIpxcpReceiveCodeRejectCatastrophic(216),
pppIpxcpReceiveProtocolRejectPermitted(217),
pppIpxcpReceiveEchoRequest(218),
pppIpxcpReceiveEchoReply(219),
pppIpxcpReceiveDiscardRequest(220),
pppIpxcpReceiveUnknownCode(221),
pppIpxcpIllegalAction(222),
pppIpxcpSendConfigureRequest(223),
pppIpxcpSendConfigureAck(224),
pppIpxcpSendConfigureNak(225),
pppIpxcpSendConfigureReject(226),
pppIpxcpSendTerminateRequest(227),
pppIpxcpSendTerminateAck(228),
pppIpxcpSendCodeReject(229),
pppIpxcpSendProtocolReject(230),
pppIpxcpSendEchoReply(231),
pppIpxcpInitialState(232),
pppIpxcpStartingState(233),
pppIpxcpClosedState(234),
pppIpxcpStoppedState(235),
pppIpxcpClosingState(236),
pppIpxcpStoppingState(237),
pppIpxcpReqSentState(238),
pppIpxcpAckRcvdState(239),
pppIpxcpAckSentState(240),
pppIpxcpOpenedState(241),
pppIpxcpCompressionProtocolRcvReq(242),
pppIpxcpCompressionProtocolRcvNak(243),
pppIpxcpCompressionProtocolRcvRej(244),
pppIpxcpCompressionProtocolXmitReq(245),
pppIpxcpNetworkNumberRcvReq(246),
pppIpxcpNetworkNumberRcvNak(247),
pppIpxcpNetworkNumberRcvRej(248),
pppIpxcpNetworkNumberXmitReq(249),
pppIpxcpNodeNumberRcvReq(250),
pppIpxcpNodeNumberRcvNak(251),
pppIpxcpNodeNumberRcvRej(252),
pppIpxcpNodeNumberXmitReq(253),
pppIpxcpRoutingProtocolRcvReq(254),
pppIpxcpRoutingProtocolRcvNak(255),
pppIpxcpRoutingProtocolRcvRej(256),
pppIpxcpRoutingProtocolXmitReq(257),
pppIpxcpRouterNameRcvReq(258),
pppIpxcpRouterNameRcvNak(259),
pppIpxcpRouterNameRcvRej(260),
pppIpxcpRouterNameXmitReq(261),
pppIpxcpConfigurationCompleteRcvReq(262),
pppIpxcpConfigurationCompleteRcvNak(263),
pppIpxcpConfigurationCompleteRcvRej(264),
pppIpxcpConfigurationCompleteXmitReq(265),
pppLcpThisLayerStart(266),
pppLcpThisLayerFinished(267),
pppLcpThisLayerUp(268),
pppLcpThisLayerDown(269),
pppLcpInitializeRestartCount(270),
pppLcpZeroRestartCount(271),
pppLcpRcvConfReqGood(272),
pppLcpRcvConfReqBad(273),
pppLcpReceiveConfigureAck(274),
pppLcpReceiveConfigureNak(275),
pppLcpReceiveConfigureReject(276),
pppLcpReceiveTerminateRequest(277),
pppLcpReceiveTerminateAck(278),
pppLcpReceiveCodeRejectPermitted(279),
pppLcpReceiveCodeRejectCatastrophic(280),
pppLcpReceiveProtocolReject(281),
pppLcpReceiveEchoRequest(282),
pppLcpReceiveEchoReply(283),
pppLcpReceiveDiscardRequest(284),
pppLcpReceiveUnknownCode(285),
pppLcpIllegalAction(286),
pppLcpSendConfigureRequest(287),
pppLcpSendConfigureAck(288),
pppLcpSendConfigureNak(289),
pppLcpSendConfigureReject(290),
pppLcpSendTerminateRequest(291),
pppLcpSendTerminateAck(292),
pppLcpSendCodeReject(293),
pppLcpSendProtocolReject(294),
pppLcpSendEchoReply(295),
pppLcpInitialState(296),
pppLcpStartingState(297),
pppLcpClosedState(298),
pppLcpStoppedState(299),
pppLcpClosingState(300),
pppLcpStoppingState(301),
pppLcpReqSentState(302),
pppLcpAckRcvdState(303),
pppLcpAckSentState(304),
pppLcpOpenedState(305),
pppLcpMruRcvReq(306),
pppLcpMruRcvNak(307),
pppLcpMruRcvRej(308),
pppLcpMruXmitReq(309),
pppLcpAsyncCharMapRcvReq(310),
pppLcpAsyncCharMapRcvNak(311),
pppLcpAsyncCharMapRcvRej(312),
pppLcpAsyncCharMapXmitReq(313),
pppLcpAuthenticationRcvReq(314),
pppLcpAuthenticationRcvNak(315),
pppLcpAuthenticationRcvRej(316),
pppLcpAuthenticationXmitReq(317),
pppLcpMagicNumberRcvReq(318),
pppLcpMagicNumberRcvNak(319),
pppLcpMagicNumberRcvRej(320),
pppLcpMagicNumberXmitReq(321),
pppLcpLinkQualityRcvReq(322),
pppLcpLinkQualityRcvNak(323),
pppLcpLinkQualityRcvRej(324),
pppLcpLinkQualityXmitReq(325),
pppLcpProtCompRcvReq(326),
pppLcpProtCompRcvNak(327),
pppLcpProtCompRcvRej(328),
pppLcpProtCompXmitReq(329),
pppLcpAddrCompRcvReq(330),
pppLcpAddrCompRcvNak(331),
pppLcpAddrCompRcvRej(332),
pppLcpAddrCompXmitReq(333),
pppLcpFcs32BitRcvReq(334),
pppLcpFcs32BitRcvNak(335),
pppLcpFcs32BitRcvRej(336),
pppLcpFcs32BitXmitReq(337),
pppLcpSelfDescPaddingRcvReq(338),
pppLcpSelfDescPaddingRcvNak(339),
pppLcpSelfDescPaddingRcvRej(340),
pppLcpSelfDescPaddingXmitReq(341),
pppLcpCompoundFramesRcvReq(342),
pppLcpCompoundFramesRcvNak(343),
pppLcpCompoundFramesRcvRej(344),
pppLcpCompoundFramesXmitReq(345),
pppLcpCallbackRcvReq(346),
pppLcpCallbackRcvNak(347),
pppLcpCallbackRcvRej(348),
pppLcpCallbackXmitReq(349),
pppLexThisLayerStart(350),
pppLexThisLayerFinished(351),
pppLexThisLayerUp(352),
pppLexThisLayerDown(353),
pppLexInitializeRestartCount(354),
pppLexZeroRestartCount(355),
pppLexRcvConfReqGood(356),
pppLexRcvConfReqBad(357),
pppLexReceiveConfigureAck(358),
pppLexReceiveConfigureNak(359),
pppLexReceiveConfigureReject(360),
pppLexReceiveTerminateRequest(361),
pppLexReceiveTerminateAck(362),
pppLexReceiveCodeRejectPermitted(363),
pppLexReceiveCodeRejectCatastrophic(364),
pppLexReceiveProtocolRejectPermitted(365),
pppLexReceiveEchoRequest(366),
pppLexReceiveEchoReply(367),
pppLexReceiveDiscardRequest(368),
pppLexReceiveUnknownCode(369),
pppLexIllegalAction(370),
pppLexSendConfigureRequest(371),
pppLexSendConfigureAck(372),
pppLexSendConfigureNak(373),
pppLexSendConfigureReject(374),
pppLexSendTerminateRequest(375),
pppLexSendTerminateAck(376),
pppLexSendCodeReject(377),
pppLexSendProtocolReject(378),
pppLexSendEchoReply(379),
pppLexInitialState(380),
pppLexStartingState(381),
pppLexClosedState(382),
pppLexStoppedState(383),
pppLexClosingState(384),
pppLexStoppingState(385),
pppLexReqSentState(386),
pppLexAckRcvdState(387),
pppLexAckSentState(388),
pppLexOpenedState(389),
pppLexMacTypeSelectRcvReq(390),
pppLexMacTypeSelectRcvNak(391),
pppLexMacTypeSelectRcvRej(392),
pppLexMacTypeSelectXmitReq(393),
pppLexTinygramCompressRcvReq(394),
pppLexTinygramCompressRcvNak(395),
pppLexTinygramCompressRcvRej(396),
pppLexTinygramCompressXmitReq(397),
pppLexMacAddressRcvReq(398),
pppLexMacAddressRcvNak(399),
pppLexMacAddressRcvRej(400),
pppLexMacAddressXmitReq(401),
pppLexMacRelayRcvReq(402),
pppLexMacRelayRcvNak(403),
pppLexMacRelayRcvRej(404),
pppLexMacRelayXmitReq(405),
pppLexStatisticsRequestRcvReq(406),
pppLqrSent(407),
pppLqrReceived(408),
pppLinkDead(409),
pppLinkEstablishment(410),
pppLinkTermination(411),
pppNetworkLayerPhase(412),
pppPapAuthenticateReqReceived(413),
pppPapAuthenticateAckReceived(414),
pppPapAuthenticateNakReceived(415),
pppPapAuthenticateReqSent(416),
pppPapAuthenticateAckSent(417),
pppPapAuthenticateNakSent(418),
frGotLmiPacket(500),
frGotBadQ922Header(501),
frGotCllmPacket(502),
frInactiveReceivedPacket(503),
frReceivedNlpidIpPacket(504),
frSentXidPacket(505),
frSentXidResponse(506),
frReceivedXidPacket(507),
frXidTimerExpired(508),
frGotBadUi(509),
frGotBadSnapPacket(510),
frLinkUp(511),
frLinkDown(512),
frLmiStarted(513),
frLmiStopped(514),
frLmiSentFullStatusEnquiry(515),
frLmiSentKeepAliveMessage(516),
frLmiStatusResponseReceived(517),
frLmiGotAnsiReportType(518),
frLmiGotFullStatusReport(519),
frLmiGotKeepAliveMessage(520),
frLmiUnsolicitedKeepAlive(521),
frLmiAsynchronousStatus(522),
frLmiGotQ933AReportType(523),
frLmiBadPvcStatusLength(524),
frLmiT391TimeoutFs(525),
frLmiT391TimeoutSe(526),
frLmiT391PollFailed(527),
frLmiT391PollSucceeded(528),
frLmiStatusEnquiryReceived(529),
frDcpMode1Initializing(530),
frDcpMode1Disabled(531),
frDcpMode1ControlPacketReceived(532),
frDcpMode1DataPacketReceived(533),
frDcpMode1RequestSent(534),
frDcpMode1RequestReceived(535),
frDcpMode1ResponseSent(536),
frDcpMode1ResponseReceived(537),
frDcpMode1Operational(538),
frDcpMode1TimerExpired(539),
frDcpMode2ControlPacketReceived(540),
frDcpResetPacketSent(541),
frDcpResetTimerExpired(542),
frDcpResetAckSent(543),
frDcpDictionaryQuotaExceeded(544),
isdnRemoteConnectionUp(1000),
isdnRemoteConnectionDown(1001),
isdnActivateConnection(1002),
isdnDeactivateConnection(1003),
multilinkMpLinkUp(1500),
multilinkMpAddBW(1501),
multilinkMpRemoveBW(1502),
multilinkMpSentBeginningFragment(1503),
multilinkMpSentMiddleFragment(1504),
multilinkMpSentEndFragment(1505),
multilinkMpSentCompleteMessage(1506),
multilinkMpReceivedBeginningFragment(1507),
multilinkMpReceivedMiddleFragment(1508),
multilinkMpReceivedEndFragment(1509),
multilinkMpReceivedCompleteMessage(1510)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An enumerated value representing the nature of the debug
message sent by the interface."
::= { wanalyzerEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.5
--
-- Wan Alarms Group
-- This group is required for any platforms that support
-- Cabletron's WAN Alarm processing functionality
--
--
-- DS1 Alarms Global Configuration Variables
--
-- These parameters apply globally to the DS1 Alarms
-- entity. These variables allow the user to program
-- DS1 alarm characteristics to be the same for all DS1
-- lines installed in the device. The other option
-- available to the user would be to configure each DS1
-- line individually, using the parameters in the DS1
-- Alarms Configuration Table.
--
ds1AlarmsGlobalConfigGroup OBJECT IDENTIFIER ::= { ctDs1Alarms 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1
ds1AlarmGlobalAdmin OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- default
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to enable and disable the DS1 Alarm
Monitoring Application for all DS1 circuits on the
device."
::= { ds1AlarmsGlobalConfigGroup 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.1
ds1AlarmGlobalAutoRecovery OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2) -- default
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to enable and disable the DS1 Alarm
Automatic Recovery feature for all DS1 circuits on
the device. For those devices that support ds1
alarm monitoring, but do not support the automatic
recovery feature, this object always returns disabled,
and performs no action when written."
::= { ds1AlarmsGlobalConfigGroup 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.2
ds1AlarmGlobalTrapEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2) -- default
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to enable and disable the DS1 Alarm
SNMP Trap generation feature for all DS1 circuits on
the device. This object operates in conjunction with
configuration of objects in the ctron-trap-mib.txt"
::= { ds1AlarmsGlobalConfigGroup 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.3
ds1AlarmGlobalESCount OBJECT-TYPE
SYNTAX INTEGER (1..300) -- default is 100
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used in conjuction with ctDs1AlarmESInterval to set
the threshold for alarm generation when the number of
Errored Seconds for a specified time interval,
measured in minutes, is exceeded. The default
Errored Seconds alarm condition is 100 errored seconds
over a 6 minute time interval."
::= { ds1AlarmsGlobalConfigGroup 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.4
ds1AlarmGlobalESInterval OBJECT-TYPE
SYNTAX INTEGER (1..15) -- default is 6 minutes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used in conjuction with ds1AlarmGlobalESCount to
set the threshold for alarm generation when the number
of Errored Seconds for a specified time interval,
measured in minutes, is exceeded. The default
Errored Seconds alarm condition is 100 errored seconds
over a 6 minute time interval."
::= { ds1AlarmsGlobalConfigGroup 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.5
ds1AlarmGlobalBPVErrorRate OBJECT-TYPE
SYNTAX INTEGER (5..9) -- default is 6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to specify the negative exponent of 10, used in
monitoring Bipolar Violations (Code Violations for E1)
over intervals defined by ds1AlarmGlobalBPVInterval.
For example, for a ds1AlarmGlobalBPVErrorRate value
of 6 used with a ds1AlarmGlobalBPVInterval of 15,
an alarm is generated when a 15 minute period has an
average error rate which exceeds 1 Bipolar Violation
(Code Violation for E1) per million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not support detect bipolar
violations, this object always returns the default,
and performs no action when written."
::= { ds1AlarmsGlobalConfigGroup 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.6
ds1AlarmGlobalBPVInterval OBJECT-TYPE
SYNTAX INTEGER (1..15) -- default is 15 minutes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to specify the interval, used in monitoring
Bipolar Violations (Code Violations for E1)
with thresholds defined by ds1AlarmGlobalBPVErrorRate.
For example, for a ds1AlarmGlobalBPVErrorRate value
of 6 used with a ds1AlarmGlobalBPVInterval of 15, an
alarm is generated when a 15 minute period has an
average error rate which exceeds 1 Bipolar Violation
(Code Violation for E1) per million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not detect bipolar
violations, this object always returns the default,
and performs no action when written."
::= { ds1AlarmsGlobalConfigGroup 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.7
ds1AlarmGlobalManualRecovery OBJECT-TYPE
SYNTAX INTEGER {
recover(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To cause a manual recovery to occur on all Ds1 circuits, this
object is set to a 1. It is always read as a 1. The recovery
will occur only when automatic recovery is disabled."
::= { ds1AlarmsGlobalConfigGroup 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.1.8
--
-- DS1 Alarms Configuration Table
--
-- The DS1 alarm table structure contains the same information as the
-- global configuration objects, but allows seperate configuratoin of
-- specific DS1 circuits contained on the device
--
ds1AlarmConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ds1AlarmConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing objects used to configure DS1 alarm
functionality on a per DS1 basis."
::= { ctDs1Alarms 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2
ds1AlarmConfigEntry OBJECT-TYPE
SYNTAX Ds1AlarmConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a single entry."
INDEX { ds1PhysNum }
::= { ds1AlarmConfigTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1
Ds1AlarmConfigEntry ::=
SEQUENCE {
ds1PhysNum
INTEGER,
ds1AlarmAdmin
INTEGER,
ds1AlarmAutoRecovery
INTEGER,
ds1AlarmTrapEnable
INTEGER,
ds1AlarmESCount
INTEGER,
ds1AlarmESInterval
INTEGER,
ds1AlarmBPVErrorRate
INTEGER,
ds1AlarmBPVInterval
INTEGER,
ds1AlarmManualRecovery
INTEGER
}
ds1PhysNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value for this object is equal to the value
of a unique physical connection identifier associated
with this DS1 which is clearly labeled on the device.
For those products that do not have a DS1 identifier
labeled on the device, the value for this object is
the same as rfc1406 dsx1LineIndex."
::= { ds1AlarmConfigEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.1
ds1AlarmAdmin OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- default
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to enable and disable the DS1 Alarm
Monitoring Application for this DS1 circuit."
::= { ds1AlarmConfigEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.2
ds1AlarmAutoRecovery OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2) -- default
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to enable and disable the DS1 Alarm
Automatic Recovery feature for this DS1 circuit.
For those devices that support ds1
alarm monitoring, but do not support the automatic
recovery feature, this object always returns disabled,
and performs no action when written."
::= { ds1AlarmConfigEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.3
ds1AlarmTrapEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2) -- default
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to enable and disable the DS1 Alarm
SNMP Trap generation feature for this DS1 circuit.
This object operates in conjunction with configuration
of objects in the ctron-trap-mib.txt"
::= { ds1AlarmConfigEntry 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.4
ds1AlarmESCount OBJECT-TYPE
SYNTAX INTEGER (1..300) -- default is 100
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used in conjuction with ctDs1AlarmESInterval to set
the threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is exceeded. The default Errored Seconds
alarm condition is 100 errored seconds over a 6 minute
time interval."
::= { ds1AlarmConfigEntry 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.5
ds1AlarmESInterval OBJECT-TYPE
SYNTAX INTEGER (1..15) -- default is 6 minutes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used in conjuction with ctDs1AlarmESCount to set the
threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is exceeded. The default Errored Seconds
alarm condition is 100 errored seconds over a 6 minute
time interval."
::= { ds1AlarmConfigEntry 6 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.6
ds1AlarmBPVErrorRate OBJECT-TYPE
SYNTAX INTEGER (5..9) -- default is 6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to specify the negative exponent of 10, used in
monitoring Bipolar Violations (Code Violations for E1)
over intervals defined by ds1AlarmBPVInterval. For
example, for a ds1AlarmBPVErrorRate value of 6 used
with a ds1AlarmBPVInterval of 15, an alarm is generated
when a 15 minute period has an average error rate which
exceeds 1 Bipolar Violation (Code Violation for E1) per
million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not support detect bipolar
violations, this object always returns the default,
and performs no action when written."
::= { ds1AlarmConfigEntry 7 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.7
ds1AlarmBPVInterval OBJECT-TYPE
SYNTAX INTEGER (1..15) -- default is 15 minutes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to specify the interval, used in
monitoring Bipolar Violations (Code Violations for E1)
with thresholds defined by ds1AlarmBPVErrorRate. For
example, for a ds1AlarmBPVErrorRate value of 6 used
with a ds1AlarmBPVInterval of 15, an alarm is generated
when a 15 minute period has an average error rate
which exceeds 1 Bipolar Violation (Code Violation for
E1) per million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not support detect bipolar
violations, this object always returns the default,
and performs no action when written."
::= { ds1AlarmConfigEntry 8 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.8
ds1AlarmManualRecovery OBJECT-TYPE
SYNTAX INTEGER {
recover(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To cause a manual recovery to occur, this object is set
to a 1. It is always read as a 1. The recovery will
occur only when automatic recovery is disabled."
::= { ds1AlarmConfigEntry 9 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.9
--
-- Wan Internet Protocol Priority Queue Filters Group
-- This group is required for any platforms that support
-- Cabletron's WAN IP Priority Queue processing functionality
--
--
-- IP PQ Configuration Variables
--
-- These parameters apply to the IP Priority Queue
-- entity. These variables allow the user to program
-- IP addresses in a filtering database. The database
-- of IP addresses are used when a WAN service is over
-- subscribed, and the packet would normally be discarded.
-- If the IP PQ admin status is enabled, and the IP
-- address of the packet to be discarded matches one
-- programmed in the database, an attempt will be made
-- to use high priority, reserved, resources to transmit
-- the packet. The addresses programmed in this table
-- should be reserved for those packets which MUST be
-- transmitted. Some examples would be RIP, and SNMP
-- packets, who's loss would cause major networking
-- problems for the system.
--
ipPQConfigGroup OBJECT IDENTIFIER ::= { ctIPPQFilters 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.1
ipPQAdmin OBJECT-TYPE
SYNTAX INTEGER {
disabled(1), -- default
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to enable and disable the IP Priority Queue
Forwarding Application."
::= { ipPQConfigGroup 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.1.1
iPPQMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns the maximum number of IP address entries
supported by the IP Priority Queue application on
this device."
::= { ipPQConfigGroup 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.1.2
iPPQNumEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Get the number of IP address entries currently
programmed in the ipPQAddressTable."
::= { ipPQConfigGroup 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.1.3
iPPQAddAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Add an IP address to the ipPQAddressTable. Always
read as a 0.0.0.0."
::= { ipPQConfigGroup 4 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.1.4
iPPQDelAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delete an IP address from the ipPQAddressTable.
Always read as a 0.0.0.0."
::= { ipPQConfigGroup 5 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.1.5
--
--
--
-- IP Priority Queue Address Table
--
-- The IP PQ table contains a list of IP adresses used with the
-- Priority Queue filtering mechanism.
--
ipPQAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpPQAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing IP addresses, used in an
IP Priority Queue Forwarding function."
::= { ctIPPQFilters 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.2
ipPQAddressEntry OBJECT-TYPE
SYNTAX IpPQAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A description of a single entry."
INDEX { ipPQAddressId }
::= { ipPQAddressTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.2.1
IpPQAddressEntry ::=
SEQUENCE {
ipPQAddressId
INTEGER,
ipPQIPAddress
IpAddress
}
ipPQAddressId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value identifying an element in a sequence
of IP PQ address entries."
::= { ipPQAddressEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.1
ipPQIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns an IP address associated with a specific
entry in this table."
::= { ipPQAddressEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.2
-- Cabletron Ds3 Extensions Group
-- This group is required for any platforms that have a t3 physical
-- port.
ctDs3ExtensionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtDs3ExtensionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is an extension to the standard ds3 configuration
table. It is a list of items that are pertinant to ds3 ports
on a platform. There is one entry per ds3 physical port on
the platform."
::= { ctDs3Ext 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.10.1
ctDs3ExtensionsEntry OBJECT-TYPE
SYNTAX CtDs3ExtensionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A ds3 extensions entry containing objects relating to
the particular ds3 physical port."
INDEX { ctDs3ExtensionsEntryIndex }
::= { ctDs3ExtensionsTable 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1
CtDs3ExtensionsEntry ::=
SEQUENCE {
ctDs3ExtensionsEntryIndex
INTEGER,
ctDs3ExtensionsNumInterfaces
INTEGER,
ctDs3ExtensionsLineBuildOut
INTEGER
}
ctDs3ExtensionsEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each ds3 physical port on the platform."
::= { ctDs3ExtensionsEntry 1 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.1
ctDs3ExtensionsNumInterfaces OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of interfaces on this physical port. This
number inidicates the number of entries this physical port
uses in the ifTable."
REFERENCE
"rfc-1213"
::= { ctDs3ExtensionsEntry 2 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.2
ctDs3ExtensionsLineBuildOut OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
zeroto255feet(2),
a255to450feet(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The line build out setting for this ds3 physical port.
Unknown indicates that the setting is neither readable or
writable."
DEFVAL { zeroto255feet }
::= { ctDs3ExtensionsEntry 3 }
-- 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.3
END
Reference in New Issue Copy Permalink