1046 lines
38 KiB
Plaintext
1046 lines
38 KiB
Plaintext
|
CTRON-SFPS-PORT-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
-- sfps-port-mib.txt
|
||
|
|
-- Revision: 0.0.11
|
||
|
|
--
|
||
|
|
-- Cabletron Systems, Inc.
|
||
|
|
-- 35 Industrial Way, P.O. Box 5005
|
||
|
|
-- Rochester, NH 03867-0505
|
||
|
|
-- (603) 332-9400
|
||
|
|
-- support@ctron.com
|
||
|
|
--
|
||
|
|
-- This module provides authoritative definitions for Cabletron's
|
||
|
|
-- enterprise specific Fast Packet Switching Services API MIB.
|
||
|
|
--
|
||
|
|
-- This module will be extended, as required.
|
||
|
|
--
|
||
|
|
--
|
||
|
|
-- Cabletron Systems reserves the right to make changes in
|
||
|
|
-- specification and other information contained in this document
|
||
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
||
|
|
-- to determine whether any such changes have been made.
|
||
|
|
--
|
||
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
||
|
|
-- indirect, special, or consequential damages whatsoever (including
|
||
|
|
-- but not limited to lost profits) arising out of or related to this
|
||
|
|
-- document or the information contained in it, even if Cabletron
|
||
|
|
-- Systems has been advised of, known, or should have known, the
|
||
|
|
-- possibility of such damages.
|
||
|
|
--
|
||
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
||
|
|
-- a non-exclusive license to use this Specification in connection
|
||
|
|
-- with the management of Cabletron products.
|
||
|
|
-- Copyright October 93 Cabletron Systems
|
||
|
|
--
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
OBJECT-TYPE
|
||
|
|
FROM RFC-1212
|
||
|
|
DisplayString
|
||
|
|
FROM RFC1213-MIB
|
||
|
|
-- tcl enterprises
|
||
|
|
Counter, TimeTicks, Gauge
|
||
|
|
FROM RFC1155-SMI
|
||
|
|
|
||
|
|
|
||
|
|
-- These Objects are defined in the file sfps-inc.mib.txt.0.0.1
|
||
|
|
sfpsPortConfig, sfpsPortStats, sfpsPortAttributeTable,
|
||
|
|
sfpsPortAttributeAPI
|
||
|
|
FROM CTRON-SFPS-INCLUDE-MIB;
|
||
|
|
|
||
|
|
-- Textual Conventions
|
||
|
|
|
||
|
|
--SfpsSwitchInstance ::= OCTET STRING (SIZE(4))
|
||
|
|
-- this will map to chassis.module index value
|
||
|
|
|
||
|
|
SfpsSwitchPort ::= INTEGER
|
||
|
|
-- this will map to chassis.module.portgroup.portsubgroup.port index value
|
||
|
|
|
||
|
|
--SfpsAddress ::= OCTET STRING (SIZE (6))
|
||
|
|
-- this will map to a MAC address
|
||
|
|
|
||
|
|
HexInteger ::= INTEGER
|
||
|
|
-- display this integer in hex format
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- SFPS Switching Port Group
|
||
|
|
-- This group contains the managed objects used to setup and
|
||
|
|
-- configure the SFPS ports for packet switching and statisics
|
||
|
|
-- monitoring. This group contains two sub-groups: configuration
|
||
|
|
-- and statistics.
|
||
|
|
|
||
|
|
|
||
|
|
-- SFPS Port Configuration Tables
|
||
|
|
-- This table contains the managed objects used to set-up and configure
|
||
|
|
-- each SFPS switching port. A seperate table exists for inbound ports
|
||
|
|
-- and outbound ports.
|
||
|
|
|
||
|
|
-- Inbound ports.
|
||
|
|
|
||
|
|
sfpsInPortConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SfpsInPortConfigEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the configuration information of each
|
||
|
|
configured inbound SFPS switch port. If SFPS is not
|
||
|
|
configured on a port, than an entry will not exist."
|
||
|
|
::= { sfpsPortConfig 1 }
|
||
|
|
|
||
|
|
sfpsInPortConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX SfpsInPortConfigEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the SFPS configuration for the SFPS
|
||
|
|
inbound switch port for which the entry exists."
|
||
|
|
INDEX { sfpsInPortConfigPort }
|
||
|
|
::= { sfpsInPortConfigTable 1 }
|
||
|
|
|
||
|
|
SfpsInPortConfigEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
sfpsInPortConfigPort SfpsSwitchPort,
|
||
|
|
sfpsInPortConfigAdminStatus INTEGER,
|
||
|
|
sfpsInPortConfigOperStatus INTEGER,
|
||
|
|
sfpsInPortConfigOperTime TimeTicks,
|
||
|
|
sfpsInPortConfigType INTEGER,
|
||
|
|
sfpsInPortConfigReservedBW INTEGER,
|
||
|
|
sfpsInPortConfigAllocBW INTEGER,
|
||
|
|
sfpsInPortConfigQoS INTEGER,
|
||
|
|
sfpsInPortConfigQSize INTEGER,
|
||
|
|
sfpsInPortConfigQLen Gauge,
|
||
|
|
sfpsInPortConfigSwitchId OCTET STRING,
|
||
|
|
sfpsInPortConfigMediaType INTEGER,
|
||
|
|
sfpsInPortConfigFrontPanelPort SfpsSwitchPort,
|
||
|
|
sfpsInPortConfigLinkStatus INTEGER,
|
||
|
|
sfpsInPortConfigLinkStateAge TimeTicks,
|
||
|
|
sfpsInPortConfigRouterPort INTEGER,
|
||
|
|
sfpsInPortConfigSlotNumber INTEGER,
|
||
|
|
sfpsInPortConfigMib2PortId INTEGER,
|
||
|
|
sfpsInPortConfigTopoAgent DisplayString,
|
||
|
|
sfpsInPortConfigLayer3Learning INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
sfpsInPortConfigPort OBJECT-TYPE
|
||
|
|
SYNTAX SfpsSwitchPort
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The primary index to the SFPS in port table. This identifies
|
||
|
|
the inbound SFPS switch port for which the entry exists."
|
||
|
|
::= { sfpsInPortConfigEntry 1 }
|
||
|
|
|
||
|
|
sfpsInPortConfigAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3),
|
||
|
|
loopback(4)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the SFPS inbound switch port
|
||
|
|
for which the entry exists."
|
||
|
|
::= { sfpsInPortConfigEntry 2 }
|
||
|
|
|
||
|
|
sfpsInPortConfigOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5), -- start-up in progress
|
||
|
|
invalid-config(6), -- not running,invalid config
|
||
|
|
testing(7) -- in loopback mode
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current operating condition of the SFPS
|
||
|
|
on the inbound switch port for which this entry exists."
|
||
|
|
::= { sfpsInPortConfigEntry 3 }
|
||
|
|
|
||
|
|
sfpsInPortConfigOperTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that sfpsInPortOperStatus has been in its current
|
||
|
|
operational state on the SFPS inbound switch port for which
|
||
|
|
this entry exists."
|
||
|
|
::= { sfpsInPortConfigEntry 4 }
|
||
|
|
|
||
|
|
sfpsInPortConfigType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
access-port(2),
|
||
|
|
network-port(3),
|
||
|
|
host-mgmt-port(4),
|
||
|
|
host-ctl-port(5),
|
||
|
|
unknown(6),
|
||
|
|
going-to-access(7),
|
||
|
|
hybrid-port(8),
|
||
|
|
stand-by(9),
|
||
|
|
network-only(10),
|
||
|
|
accessOnly(11),
|
||
|
|
raPrimary(12),
|
||
|
|
uplink(13),
|
||
|
|
fclStandby(14),
|
||
|
|
loopStandby(15),
|
||
|
|
raStandby(16),
|
||
|
|
flood(17),
|
||
|
|
uplinkFlood(18),
|
||
|
|
downlinkFlood(19),
|
||
|
|
unknown-ra-standby(20)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the type of port access attribute for the inbound SFPS
|
||
|
|
port for which the entry exists. Access ports allow single
|
||
|
|
user or shared access and perform statisics and control;
|
||
|
|
network ports are equivalent to trunk ports with no access
|
||
|
|
control; host management port indicates the (virtual) port
|
||
|
|
to which the (internal) management agent is attached; host
|
||
|
|
control port indicates the port to redirect non-management
|
||
|
|
packets."
|
||
|
|
::= { sfpsInPortConfigEntry 5 }
|
||
|
|
|
||
|
|
sfpsInPortConfigReservedBW OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the amount of Bandwidth that is reserved for the inbound
|
||
|
|
SFPS port for which this entry exists. This bandwidth is
|
||
|
|
set aside for this port and may be given to another port if
|
||
|
|
unused."
|
||
|
|
|
||
|
|
-- ? should this be in Mbits/sec or as a percentage of total b/w.
|
||
|
|
-- Currently defined as percentage of total b/w in switch.
|
||
|
|
|
||
|
|
::= { sfpsInPortConfigEntry 6 }
|
||
|
|
|
||
|
|
sfpsInPortConfigAllocBW OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the amount of Bandwidth that is allocated for
|
||
|
|
the inbound SFPS port for which this entry exists.
|
||
|
|
This bandwidth may be less than the reserved
|
||
|
|
bandwidth."
|
||
|
|
|
||
|
|
-- ? should this be in Mbits/sec or as a percentage of total b/w.
|
||
|
|
-- Currently defined as percentage of total b/w in switch.
|
||
|
|
|
||
|
|
::= { sfpsInPortConfigEntry 7 }
|
||
|
|
|
||
|
|
sfpsInPortConfigQoS OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the desired QoS service class for the inbound
|
||
|
|
SFPS port for which this entry exists."
|
||
|
|
|
||
|
|
-- ? should this map to the ATM service classes
|
||
|
|
|
||
|
|
::= { sfpsInPortConfigEntry 8 }
|
||
|
|
|
||
|
|
sfpsInPortConfigQSize OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the maximum inbound queue size for this port.
|
||
|
|
Size is indicated in packets (packet descriptors)."
|
||
|
|
::= { sfpsInPortConfigEntry 9 }
|
||
|
|
|
||
|
|
sfpsInPortConfigQLen OBJECT-TYPE
|
||
|
|
SYNTAX Gauge
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the actual inbound queue size for this port.
|
||
|
|
Size is indicated in packets (packet descriptors). This
|
||
|
|
is a transient value that reflects the current depth of
|
||
|
|
queue."
|
||
|
|
::= { sfpsInPortConfigEntry 10 }
|
||
|
|
|
||
|
|
sfpsInPortConfigSwitchId OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This entry is the id of the port."
|
||
|
|
::= { sfpsInPortConfigEntry 11 }
|
||
|
|
|
||
|
|
sfpsInPortConfigMediaType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ethernet(1),
|
||
|
|
fddi(2),
|
||
|
|
atm-lec(3),
|
||
|
|
token-ring(4),
|
||
|
|
wan(5),
|
||
|
|
inb(6),
|
||
|
|
hcp(7),
|
||
|
|
hdp(8),
|
||
|
|
atm-svc(9),
|
||
|
|
atm-pvc(10),
|
||
|
|
unknown(11),
|
||
|
|
atm-forum-lec(12),
|
||
|
|
atm-forum-pvc(13),
|
||
|
|
atm-forum-svc(14)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsInPortConfigEntry 12 }
|
||
|
|
|
||
|
|
sfpsInPortConfigFrontPanelPort OBJECT-TYPE
|
||
|
|
SYNTAX SfpsSwitchPort
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This represents the front panel physical port number"
|
||
|
|
::= { sfpsInPortConfigEntry 13 }
|
||
|
|
|
||
|
|
sfpsInPortConfigLinkStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
linkUp(2),
|
||
|
|
linkDown(3),
|
||
|
|
link-N-A(4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The link status of this port."
|
||
|
|
::= { sfpsInPortConfigEntry 14 }
|
||
|
|
|
||
|
|
sfpsInPortConfigLinkStateAge OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Number of time ticks that link has been in this state."
|
||
|
|
::= { sfpsInPortConfigEntry 15 }
|
||
|
|
|
||
|
|
|
||
|
|
sfpsInPortConfigRouterPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
router-port(2),
|
||
|
|
no-router(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies whether this port is a router port."
|
||
|
|
::= { sfpsInPortConfigEntry 16 }
|
||
|
|
|
||
|
|
sfpsInPortConfigSlotNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Slot number in the chassis."
|
||
|
|
::= { sfpsInPortConfigEntry 17 }
|
||
|
|
|
||
|
|
sfpsInPortConfigMib2PortId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Mib2 Port id"
|
||
|
|
::= { sfpsInPortConfigEntry 18 }
|
||
|
|
|
||
|
|
sfpsInPortConfigTopoAgent OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Topology Agent"
|
||
|
|
::= { sfpsInPortConfigEntry 19 }
|
||
|
|
|
||
|
|
sfpsInPortConfigLayer3Learning OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
enabled(2),
|
||
|
|
disabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Topology Agent"
|
||
|
|
::= { sfpsInPortConfigEntry 22 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- Outbound Ports
|
||
|
|
|
||
|
|
sfpsOutPortConfigTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SfpsOutPortConfigEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the configuration information of each
|
||
|
|
configured outbound SFPS switch port. If SFPS is not
|
||
|
|
configured on a port, than an entry will not exist."
|
||
|
|
::= { sfpsPortConfig 2 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigEntry OBJECT-TYPE
|
||
|
|
SYNTAX SfpsOutPortConfigEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry specifies the SFPS configuration for the SFPS
|
||
|
|
outbound switch port for which the entry exists."
|
||
|
|
INDEX { sfpsOutPortConfigPort }
|
||
|
|
::= { sfpsOutPortConfigTable 1 }
|
||
|
|
|
||
|
|
SfpsOutPortConfigEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
sfpsOutPortConfigPort SfpsSwitchPort,
|
||
|
|
sfpsOutPortConfigAdminStatus INTEGER,
|
||
|
|
sfpsOutPortConfigOperStatus INTEGER,
|
||
|
|
sfpsOutPortConfigOperTime TimeTicks,
|
||
|
|
sfpsOutPortConfigType INTEGER,
|
||
|
|
sfpsOutPortConfigReservedBW INTEGER,
|
||
|
|
sfpsOutPortConfigAllocBW INTEGER,
|
||
|
|
sfpsOutPortConfigQoS INTEGER,
|
||
|
|
sfpsOutPortConfigQSize INTEGER,
|
||
|
|
sfpsOutPortConfigQLen Gauge,
|
||
|
|
sfpsOutPortConfigSwitchId OCTET STRING,
|
||
|
|
sfpsOutPortConfigMediaType INTEGER,
|
||
|
|
sfpsOutPortConfigFrontPanelPort SfpsSwitchPort,
|
||
|
|
sfpsOutPortConfigLinkStatus INTEGER,
|
||
|
|
sfpsOutPortConfigLinkStateAge TimeTicks,
|
||
|
|
sfpsOutPortConfigRouterPort INTEGER,
|
||
|
|
sfpsOutPortConfigSlotNumber INTEGER,
|
||
|
|
sfpsOutPortConfigMib2PortId INTEGER
|
||
|
|
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
sfpsOutPortConfigPort OBJECT-TYPE
|
||
|
|
SYNTAX SfpsSwitchPort
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The primary index to the SFPS in port table. This identifies
|
||
|
|
the outbound SFPS switch port for which the entry exists."
|
||
|
|
::= { sfpsOutPortConfigEntry 1 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3),
|
||
|
|
loopback(4)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the SFPS outbound switch port
|
||
|
|
for which the entry exists."
|
||
|
|
::= { sfpsOutPortConfigEntry 2 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
disabled(2), -- not running
|
||
|
|
enabled(3), -- running
|
||
|
|
pending-disable(4), -- shut-down in progress
|
||
|
|
pending-enable(5), -- start-up in progress
|
||
|
|
invalid-config(6), -- not running,invalid config
|
||
|
|
testing(7) -- in loopback mode
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the current operating condition of the SFPS
|
||
|
|
on the outbound switch port for which this entry exists."
|
||
|
|
::= { sfpsOutPortConfigEntry 3 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigOperTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the elapsed time, in hundredths of a second,
|
||
|
|
that sfpsOutPortOperStatus has been in its current
|
||
|
|
operational state on the SFPS outbound switch port for which
|
||
|
|
this entry exists."
|
||
|
|
::= { sfpsOutPortConfigEntry 4 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
access-port(2),
|
||
|
|
network-port(3),
|
||
|
|
host-mgmt-port(4),
|
||
|
|
host-ctl-port(5),
|
||
|
|
unknown(6),
|
||
|
|
going-to-access(7),
|
||
|
|
hybrid-port(8),
|
||
|
|
stand-by(9),
|
||
|
|
network-only(10),
|
||
|
|
accessOnly(11),
|
||
|
|
raPrimary(12),
|
||
|
|
standbyFCLConflict(13),
|
||
|
|
standbyLoopedPort(14),
|
||
|
|
standbyVersionConflict(15),
|
||
|
|
standbyRANonPrimary(16),
|
||
|
|
flood(17),
|
||
|
|
uplinkFlood(18),
|
||
|
|
downlinkFlood(19),
|
||
|
|
unknown-ra-standby(20)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the type of port access attribute for the outbound SFPS
|
||
|
|
port for which the entry exists. Access ports allow single
|
||
|
|
user or shared access and perform statisics and control;
|
||
|
|
network ports are equivalent to trunk ports with no access
|
||
|
|
control; host management port indicates the (virtual) port
|
||
|
|
to which the (internal) management agent is attached; host
|
||
|
|
control port indicates the port to redirect non-management
|
||
|
|
packets."
|
||
|
|
::= { sfpsOutPortConfigEntry 5 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigReservedBW OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the amount of Bandwidth that is reserved for the outbound
|
||
|
|
SFPS port for which this entry exists. This bandwidth is
|
||
|
|
set aside for this port and may be given to another port if
|
||
|
|
unused."
|
||
|
|
|
||
|
|
-- ? should this be in Mbits/sec or as a percentage of total b/w.
|
||
|
|
-- Currently defined as percentage of total b/w in switch.
|
||
|
|
|
||
|
|
::= { sfpsOutPortConfigEntry 6 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigAllocBW OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the amount of Bandwidth that is allocated for
|
||
|
|
the outbound SFPS port for which this entry exists.
|
||
|
|
This bandwidth may be less than the reserved
|
||
|
|
bandwidth."
|
||
|
|
|
||
|
|
-- ? should this be in Mbits/sec or as a percentage of total b/w.
|
||
|
|
-- Currently defined as percentage of total b/w in switch.
|
||
|
|
|
||
|
|
::= { sfpsOutPortConfigEntry 7 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigQoS OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the desired QoS service class for the outbound
|
||
|
|
SFPS port for which this entry exists."
|
||
|
|
|
||
|
|
-- ? should this map to the ATM service classes
|
||
|
|
|
||
|
|
::= { sfpsOutPortConfigEntry 8 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigQSize OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the maximum outbound queue size for this port.
|
||
|
|
Size is indicated in packets (packet descriptors)."
|
||
|
|
::= { sfpsOutPortConfigEntry 9 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigQLen OBJECT-TYPE
|
||
|
|
SYNTAX Gauge
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the actual outbound queue size for this port.
|
||
|
|
Size is indicated in packets (packet descriptors). This
|
||
|
|
is a transient value that reflects the current depth of
|
||
|
|
queue."
|
||
|
|
::= { sfpsOutPortConfigEntry 10 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigSwitchId OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This entry is id of the port."
|
||
|
|
::= { sfpsOutPortConfigEntry 11 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigMediaType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ethernet(1),
|
||
|
|
fddi(2),
|
||
|
|
atm-lec(3),
|
||
|
|
token-ring(4),
|
||
|
|
wan(5),
|
||
|
|
inb(6),
|
||
|
|
hcp(7),
|
||
|
|
hdp(8),
|
||
|
|
atm-encap(9),
|
||
|
|
atm-pvc(10),
|
||
|
|
unknown(11),
|
||
|
|
atm-forum-lec(12),
|
||
|
|
atm-forum-pvc(13),
|
||
|
|
atm-forum-svc(14)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsOutPortConfigEntry 12 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigFrontPanelPort OBJECT-TYPE
|
||
|
|
SYNTAX SfpsSwitchPort
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsOutPortConfigEntry 13 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigLinkStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
linkUp(2),
|
||
|
|
linkDown(3),
|
||
|
|
linkNA(4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The link status of this port."
|
||
|
|
::= { sfpsOutPortConfigEntry 14 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigLinkStateAge OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Number of time ticks that link has been in this state."
|
||
|
|
::= { sfpsOutPortConfigEntry 15 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigRouterPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
router-port(2),
|
||
|
|
no-router(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies whether this port is a router port."
|
||
|
|
::= { sfpsOutPortConfigEntry 16 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigSlotNumber OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Slot number in the chassis."
|
||
|
|
::= { sfpsOutPortConfigEntry 17 }
|
||
|
|
|
||
|
|
sfpsOutPortConfigMib2PortId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Mib2 Port id"
|
||
|
|
::= { sfpsOutPortConfigEntry 18 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
|
||
|
|
-- SFPS Switching Port Statistics Tables
|
||
|
|
-- This table contains the objects that specify the packet and byte counters
|
||
|
|
-- for each configured SFPS switching port. A separate table exists for
|
||
|
|
-- inbound and outbound ports.
|
||
|
|
|
||
|
|
-- Inbound ports.
|
||
|
|
|
||
|
|
sfpsInPortStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SfpsInPortStatsEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the packet and byte counters for each
|
||
|
|
inbound SFPS switch port."
|
||
|
|
::= { sfpsPortStats 1 }
|
||
|
|
|
||
|
|
sfpsInPortStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX SfpsInPortStatsEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the SFPS packet and byte counters for the
|
||
|
|
inbound SFPS switch port for which this entry exists."
|
||
|
|
INDEX { sfpsInPortStatsPort }
|
||
|
|
::= { sfpsInPortStatsTable 1 }
|
||
|
|
|
||
|
|
SfpsInPortStatsEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
sfpsInPortStatsPort SfpsSwitchPort,
|
||
|
|
sfpsInPortStatsAdminStatus INTEGER,
|
||
|
|
sfpsInPortStatsReset INTEGER,
|
||
|
|
sfpsInPortStatsOperTime TimeTicks,
|
||
|
|
sfpsInPortStatsPkts Counter,
|
||
|
|
sfpsInPortStatsDiscardPkts Counter,
|
||
|
|
sfpsInPortStatsBytes Counter,
|
||
|
|
sfpsInPortStatsDiscardBytes Counter,
|
||
|
|
sfpsInPortStatsQOverflows Counter,
|
||
|
|
sfpsInPortStatsLinkUps Counter,
|
||
|
|
sfpsInPortStatsLinkDowns Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
sfpsInPortStatsPort OBJECT-TYPE
|
||
|
|
SYNTAX SfpsSwitchPort
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The primary index to the SFPS port table. This identifies
|
||
|
|
the SFPS inbound switch port for which the entry exists."
|
||
|
|
::= { sfpsInPortStatsEntry 1 }
|
||
|
|
|
||
|
|
sfpsInPortStatsAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the SFPS packet and byte
|
||
|
|
counters on the inbound SFPS switch port for which this entry
|
||
|
|
exists."
|
||
|
|
::= { sfpsInPortStatsEntry 2 }
|
||
|
|
|
||
|
|
sfpsInPortStatsReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the SFPS packet and byte counters on the inbound SFPS
|
||
|
|
switch port for which this entry exists."
|
||
|
|
::= { sfpsInPortStatsEntry 3 }
|
||
|
|
|
||
|
|
sfpsInPortStatsOperTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time (# of time ticks) that the
|
||
|
|
port-specific SFPS packet and byte counters have been
|
||
|
|
active on the inbound SFPS switch port for which this entry
|
||
|
|
exists."
|
||
|
|
::= { sfpsInPortStatsEntry 4 }
|
||
|
|
|
||
|
|
sfpsInPortStatsPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of SFPS packets that have been
|
||
|
|
received, during sfpsInPortStatsOpertime, on the inbound
|
||
|
|
SFPS switch port for which this entry exists."
|
||
|
|
::= { sfpsInPortStatsEntry 5 }
|
||
|
|
|
||
|
|
sfpsInPortStatsDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of SFPS packets that have been
|
||
|
|
discarded (dropped), during sfpsInPortStatsOpertime, on the
|
||
|
|
inbound SFPS switch port for which this entry exists"
|
||
|
|
::= { sfpsInPortStatsEntry 6 }
|
||
|
|
|
||
|
|
sfpsInPortStatsBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of SFPS bytes that have been
|
||
|
|
received, during sfpsInPortStatsOperTime, on the inbound
|
||
|
|
SFPS switch port for which the entry exists."
|
||
|
|
::= { sfpsInPortStatsEntry 7 }
|
||
|
|
|
||
|
|
sfpsInPortStatsDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the SFPS packets
|
||
|
|
that have been discarded (dropped), during
|
||
|
|
sfpsInPortStatsOperTime, on the inbound SFPS switch port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { sfpsInPortStatsEntry 8 }
|
||
|
|
|
||
|
|
sfpsInPortStatsQOverflows OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of queue overflow conditions
|
||
|
|
have been experienced for the inbound SFPS switch port
|
||
|
|
for which the entry exists."
|
||
|
|
::= { sfpsInPortStatsEntry 9 }
|
||
|
|
|
||
|
|
sfpsInPortStatsLinkUps OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of link ups that this port has seen."
|
||
|
|
::= { sfpsInPortStatsEntry 10 }
|
||
|
|
|
||
|
|
sfpsInPortStatsLinkDowns OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of link downs that this port has seen."
|
||
|
|
::= { sfpsInPortStatsEntry 11 }
|
||
|
|
|
||
|
|
--
|
||
|
|
|
||
|
|
-- Outbound ports.
|
||
|
|
|
||
|
|
sfpsOutPortStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SfpsOutPortStatsEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the packet and byte counters for each
|
||
|
|
outbound SFPS switch port."
|
||
|
|
::= { sfpsPortStats 2 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX SfpsOutPortStatsEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the SFPS packet and byte counters for the
|
||
|
|
outbound SFPS switch port for which this entry exists."
|
||
|
|
INDEX { sfpsOutPortStatsPort }
|
||
|
|
::= { sfpsOutPortStatsTable 1 }
|
||
|
|
|
||
|
|
SfpsOutPortStatsEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
sfpsOutPortStatsPort SfpsSwitchPort,
|
||
|
|
sfpsOutPortStatsAdminStatus INTEGER,
|
||
|
|
sfpsOutPortStatsReset INTEGER,
|
||
|
|
sfpsOutPortStatsOperTime TimeTicks,
|
||
|
|
sfpsOutPortStatsPkts Counter,
|
||
|
|
sfpsOutPortStatsDiscardPkts Counter,
|
||
|
|
sfpsOutPortStatsBytes Counter,
|
||
|
|
sfpsOutPortStatsDiscardBytes Counter,
|
||
|
|
sfpsOutPortStatsQOverflows Counter,
|
||
|
|
sfpsOutPortStatsLinkUps Counter,
|
||
|
|
sfpsOutPortStatsLinkDowns Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
sfpsOutPortStatsPort OBJECT-TYPE
|
||
|
|
SYNTAX SfpsSwitchPort
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The primary index to the SFPS port table. This identifies
|
||
|
|
the SFPS outbound switch port for which the entry exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 1 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Sets the administrative state of the SFPS packet and byte
|
||
|
|
counters on the outbound SFPS switch port for which this entry
|
||
|
|
exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 2 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Resets the SFPS packet and byte counters on the outbound SFPS
|
||
|
|
switch port for which this entry exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 3 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsOperTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the amount of time (# of time ticks) that the
|
||
|
|
port-specific SFPS packet and byte counters have been
|
||
|
|
active on the outbound SFPS switch port for which this entry
|
||
|
|
exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 4 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of SFPS packets that have been
|
||
|
|
received, during sfpsOutPortStatsOpertime, on the outbound
|
||
|
|
SFPS switch port for which this entry exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 5 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsDiscardPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of SFPS packets that have been
|
||
|
|
discarded (dropped), during sfpsOutPortStatsOpertime, on the
|
||
|
|
outbound SFPS switch port for which this entry exists"
|
||
|
|
::= { sfpsOutPortStatsEntry 6 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of SFPS bytes that have been
|
||
|
|
received, during sfpsOutPortStatsOperTime, on the outbound
|
||
|
|
SFPS switch port for which the entry exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 7 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsDiscardBytes OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of bytes in the SFPS packets
|
||
|
|
that have been discarded (dropped), during
|
||
|
|
sfpsOutPortStatsOperTime, on the outbound SFPS switch port for
|
||
|
|
which the entry exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 8 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsQOverflows OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the total number of queue overflow conditions
|
||
|
|
have been experienced for the outbound SFPS switch port
|
||
|
|
for which the entry exists."
|
||
|
|
::= { sfpsOutPortStatsEntry 9 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsLinkUps OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of link ups that this port has seen."
|
||
|
|
::= { sfpsOutPortStatsEntry 10 }
|
||
|
|
|
||
|
|
sfpsOutPortStatsLinkDowns OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of link downs that this port has seen."
|
||
|
|
::= { sfpsOutPortStatsEntry 11 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Port Attributes
|
||
|
|
|
||
|
|
sfpsPortAttributePort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsPortAttributeTable 1 }
|
||
|
|
|
||
|
|
sfpsPortAttributeAttributes OBJECT-TYPE
|
||
|
|
SYNTAX HexInteger
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsPortAttributeTable 2 }
|
||
|
|
|
||
|
|
sfpsPortAttributeLearnSelfArp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
off(2),
|
||
|
|
on(1)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsPortAttributeTable 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Port Attributes API
|
||
|
|
|
||
|
|
sfpsPortAttributeAPIVerb OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
resetAll(2),
|
||
|
|
resetPort(3),
|
||
|
|
enablePortAttr(4),
|
||
|
|
disablePortAttr(5)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsPortAttributeAPI 1 }
|
||
|
|
|
||
|
|
sfpsPortAttributeAPIPort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsPortAttributeAPI 2 }
|
||
|
|
|
||
|
|
sfpsPortAttributeAPIAttribute OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(2),
|
||
|
|
learnSelfArp(1)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { sfpsPortAttributeAPI 3 }
|
||
|
|
|
||
|
|
END
|